You are not logged in.

Pages: 1

#1 2025-01-13 20:53:07

Stissshak
Member
Registered: 2025-01-13
Posts: 6

Dummy output on my china laptop

Problem with my Chinese laptop. No output devices. Here is some information about my laptop:

stissshak@mypc ~> lsmod | grep snd_hda_intel

snd_hda_intel          65536  1
snd_intel_dspcfg       40960  4 snd_hda_intel,snd_sof,snd_sof_intel_hda_common,snd_sof_intel_hda_generic
snd_hda_codec         212992  4 snd_hda_codec_hdmi,snd_hda_intel,snd_soc_hdac_hda,snd_sof_intel_hda
snd_hda_core          147456  7 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_sof_intel_hda_common,snd_soc_hdac_hda,snd_sof_intel_hda
snd_pcm               200704  11 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,soundwire_intel,snd_sof,snd_sof_intel_hda_common,snd_compress,snd_soc_core,snd_sof_utils,snd_hda_core,snd_pcm_dmaengine
snd                   155648  15 snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_sof,snd_timer,snd_compress,snd_soc_core,snd_pcm

stissshak@mypc ~> lspci -nnk | grep -A2 Audio

00:1f.3 Audio device [0403]: Intel Corporation Jasper Lake HD Audio [8086:4dc8] (rev 01)
        DeviceName: Onboard - Sound
        Subsystem: Intel Corporation Device [8086:7270]

Alsamixer output HDA Intel PCH

Last edited by Stissshak (2025-01-13 20:54:40)

Offline

#2 2025-01-14 09:34:57

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,923

Re: Dummy output on my china laptop

Install sof-firmware, reboot, check whether you can reproduce.

Offline

#3 2025-01-14 16:17:45

Stissshak
Member
Registered: 2025-01-13
Posts: 6

Re: Dummy output on my china laptop

Sof-firmware has already been downloaded. Reinstalled, problem still persists

Offline

#4 2025-01-14 16:23:51

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,923

Re: Dummy output on my china laptop

Mhm what output do you get from 

sudo dmesg | grep -iE 'snd|sof'
aplay -l
sudo fuser -v /dev/snd/*

Last edited by V1del (2025-01-14 16:24:10)

Offline

#5 2025-01-25 14:58:48

Stissshak
Member
Registered: 2025-01-13
Posts: 6

Re: Dummy output on my china laptop

[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=cff2e805-0582-4791-9a9d-5e64f0f8c7c5 rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet snd_hda_intel.dmic_detect=0
[    0.067609] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=cff2e805-0582-4791-9a9d-5e64f0f8c7c5 rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet snd_hda_intel.dmic_detect=0
[    0.070974] software IO TLB: area num 4.
[    0.335499] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.335500] software IO TLB: mapped [mem 0x0000000066bd7000-0x000000006abd7000] (64MB)
[    6.290210] snd_hda_intel 0000:00:1f.3: dmic_detect option is deprecated, pass snd-intel-dspcfg.dsp_driver=1 option instead
[    6.290261] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    6.290862] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    7.317239] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[    8.320594] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x000f0000
[    9.323924] snd_hda_intel 0000:00:1f.3: Codec #0 probe error; disabling it...


**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  stissshak    544 F.... wireplumber
/dev/snd/seq:        stissshak    543 F.... pipewire

Last edited by Stissshak (2025-01-29 06:40:55)

Offline

#6 2025-01-25 16:36:05

seth
Member
Registered: 2012-09-03
Posts: 60,892

Re: Dummy output on my china laptop

Please use [code][/code] tags. Edit your post in this regard.

Why is "snd_hda_intel.dmic_detect=0" ?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2025-01-29 06:47:31

Stissshak
Member
Registered: 2025-01-13
Posts: 6

Re: Dummy output on my china laptop

Yes, sorry about that. About "snd_hda_intel.dmic_detect=0", I tried some methods from forums for my problem. But it doesn't work

Offline

#8 2025-01-29 08:02:16

seth
Member
Registered: 2012-09-03
Posts: 60,892

Re: Dummy output on my china laptop

Do you get the "Codec #0 probe error; disabling it..." w/o it?
Resp. what's the inquired outptut w/o that parameter?
What other things "from forums" are currently still activated?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#9 2025-01-30 11:53:21

Stissshak
Member
Registered: 2025-01-13
Posts: 6

Re: Dummy output on my china laptop

Yes, w/o this i too get this message.
W/o this parameter i got this:

[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=cff2e805-0582-4791-9a9d-5e64f0f8c7c5 rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet snd_hda_intel.dmic_detect=0
[    0.067726] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=cff2e805-0582-4791-9a9d-5e64f0f8c7c5 rw zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet snd_hda_intel.dmic_detect=0
[    0.071124] software IO TLB: area num 4.
[    0.336020] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.336021] software IO TLB: mapped [mem 0x0000000066bf8000-0x000000006abf8000] (64MB)
[    7.211419] snd_hda_intel 0000:00:1f.3: dmic_detect option is deprecated, pass snd-intel-dspcfg.dsp_driver=1 option instead
[    7.211463] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    7.217674] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.237242] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[    9.247247] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x000f0000
[   10.253941] snd_hda_intel 0000:00:1f.3: Codec #0 probe error; disabling it...

And about "from forums", i also have some strings in alsa.conf and inteldsp.conf
alsa.conf

options snd-hda-intel model=dell-headset-dock

inteldsp.conf

optiond snd_intel_dspcfg dsp_driver=1

Offline

#10 2025-01-30 13:35:52

seth
Member
Registered: 2012-09-03
Posts: 60,892

Re: Dummy output on my china laptop

It's still complaining about the parameter (just using a different value) and that collides we/ the suggested alnd also set snd_intel_dspcfg.dsp_driver=1
Remove that and the alsa config and post the updated journal to illustrate the baseline situation (don't forget to regenerate the iniramfs, the modprobe.config might be in there)

modprobe -c | grep -v alias | grep snd

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2025-02-08 15:48:32

Stissshak
Member
Registered: 2025-01-13
Posts: 6

Re: Dummy output on my china laptop

Sorry it took so long. This is what I see when I enter this command

modprobe -c | grep -v alias | grep snd
blacklist snd_pcsp
blacklist snd_soc_avs

Offline

#12 2025-02-08 21:20:55

seth
Member
Registered: 2012-09-03
Posts: 60,892

Re: Dummy output on my china laptop

The command was mostly fro you to see whether you've removed that module parameter.

seth wrote:

Remove that and the alsa config and post the updated journal to illustrate the baseline situation

sudo journalctl -b | curl -F 'file=@-' 0x0.st

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB