You are not logged in.
Just updated Linux kernel 6.13.1-arch2-1
I also installed zoho assist for remote access and it never installed properly and the systemd would fail. So I uninstalled it.
Rebooted logged in to plasma wayland and computer crashed and went to black screen.
Rebooted and the exact thing happened.
Rebooted and tried logging into plasma x11 and it worked just fine. For some reason I decided to log back out and retry booting into plasma wayland and it didn't crash. Restarted the computer and tried to boot into plasma wayland and it crashed again.
Here is some journal logs -p 3 for the last couple of boots:
Dec 27 16:15:17 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
Dec 27 16:15:18 Neel kernel: snd_hda_intel 0000:73:00.6: no codecs found!
Dec 27 16:15:36 Neel org_kde_powerdevil[1485]: busno=11, All features that should not exist detected. Monitor does not indicate unsupported
Dec 27 16:43:56 Neel kernel: ata2.00: revalidation failed (errno=-5)
Dec 27 16:43:57 Neel kernel: xhci_hcd 0000:71:00.0: PM: suspend_common(): xhci_pci_suspend returns -110
Dec 27 16:43:57 Neel kernel: xhci_hcd 0000:71:00.0: can't suspend (hcd_pci_runtime_suspend returned -110)
Dec 31 15:14:45 Neel kwin_wayland[1162]: kwin_libinput: Libinput: event0 - Power Button: client bug: event processing lagging behind by 3338ms, your system is too s>
Dec 31 15:14:45 Neel kwin_wayland[1162]: kwin_libinput: Libinput: event1 - Power Button: client bug: event processing lagging behind by 3338ms, your system is too s>
Dec 31 15:14:45 Neel kwin_wayland[1162]: kwin_libinput: Libinput: event8 - Logitech USB Receiver Mouse: client bug: event processing lagging behind by 37ms, your sy>
Dec 31 15:37:58 Neel kwin_wayland[1162]: kwin_scene_opengl: Invalid framebuffer status: "GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT"
Dec 31 15:39:22 Neel dbus-broker-launch[792]: Activation request for 'org.freedesktop.nm_dispatcher' failed.
Dec 31 15:39:22 Neel dbus-broker-launch[792]: Activation request for 'org.freedesktop.nm_dispatcher' failed.
Dec 31 15:39:23 Neel kernel: watchdog: watchdog0: watchdog did not stop!
-- Boot 1f1f64af9ded4147963adc9b41053982 --
Dec 31 15:40:04 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
Dec 31 15:40:05 Neel kernel: snd_hda_intel 0000:73:00.6: no codecs found!
Dec 31 15:40:57 Neel org_kde_powerdevil[1476]: busno=11, All features that should not exist detected. Monitor does not indicate unsupported
Dec 31 15:42:58 Neel kwin_wayland[1159]: kwin_scene_opengl: Invalid framebuffer status: "GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT"
Dec 31 15:44:17 Neel hp-setup[3363]: hp-setup[3363]: error: No devices found on bus: net
Dec 31 15:44:17 Neel hp-setup[3363]: hp-setup[3363]: error: HPLIP cannot detect printers in your network. This may be due to existing firewall settings blocking th>
When you are in a trusted network environment, you may open the ports for network services like mdns and slp in >
https://developers.hp.com/hp-linux-imaging-and-printing/KnowledgeBase/Troubleshooting/TroubleshootNetwork
Dec 31 15:48:42 Neel hp-toolbox[3903]: hp-toolbox[3903]: error: Unable to lock /home/gregh/.hplip/hp-toolbox.lock. Is hp-toolbox already running?
Dec 31 15:49:06 Neel hp-setup[3909]: hp-setup[3909]: error: No devices found on bus: net
Dec 31 15:49:06 Neel hp-setup[3909]: hp-setup[3909]: error: HPLIP cannot detect printers in your network. This may be due to existing firewall settings blocking th>
When you are in a trusted network environment, you may open the ports for network services like mdns and slp in >
https://developers.hp.com/hp-linux-imaging-and-printing/KnowledgeBase/Troubleshooting/TroubleshootNetwork
Dec 31 15:54:31 Neel hp-setup[3909]: hp-setup[3909]: error: No devices found on bus: net
Dec 31 15:54:31 Neel hp-setup[3909]: hp-setup[3909]: error: HPLIP cannot detect printers in your network. This may be due to existing firewall settings blocking th>
When you are in a trusted network environment, you may open the ports for network services like mdns and slp in >
https://developers.hp.com/hp-linux-imaging-and-printing/KnowledgeBase/Troubleshooting/TroubleshootNetwork
Dec 31 15:56:20 Neel hp-setup[3909]: io/hpmud/hpmud.c 254: invalid channel_open state, current io_mode=raw/uni service=HP-MESSAGE hpfax:/net/HP_ColorLaserJet_MFP_M28>
Dec 31 15:56:20 Neel hp-setup[3909]: io/hpmud/hpmud.c 710: invalid channel_close state
Dec 31 15:56:26 Neel hp-setup[3909]: io/hpmud/hpmud.c 254: invalid channel_open state, current io_mode=raw/uni service=HP-MESSAGE hp:/net/HP_ColorLaserJet_MFP_M282-M>
Dec 31 15:56:26 Neel hp-setup[3909]: io/hpmud/hpmud.c 710: invalid channel_close state
Dec 31 15:56:26 Neel python[3343]: io/hpmud/hpmud.c 254: invalid channel_open state, current io_mode=raw/uni service=HP-MESSAGE hp:/net/HP_ColorLaserJet_MFP_M282-M28>
Dec 31 15:56:26 Neel python[3343]: io/hpmud/hpmud.c 710: invalid channel_close state
Dec 31 16:00:28 Neel kernel: xhci_hcd 0000:71:00.0: PM: suspend_common(): xhci_pci_suspend returns -110
Dec 31 16:00:28 Neel kernel: xhci_hcd 0000:71:00.0: can't suspend (hcd_pci_runtime_suspend returned -110)
Dec 31 17:21:46 Neel python[8194]: io/hpmud/model.c 532: no colorlaserjet_mfp_m282-m285 attributes found in /usr/share/hplip/data/models/models.dat
Dec 31 17:21:46 Neel python[8194]: io/hpmud/model.c 543: no colorlaserjet_mfp_m282-m285 attributes found in /usr/share/hplip/data/models/unreleased/unreleased.dat
Dec 31 17:24:49 Neel sudo[8825]: pam_unix(sudo:auth): conversation failed
Dec 31 17:24:49 Neel sudo[8825]: pam_unix(sudo:auth): auth could not identify password for [gregh]
Dec 31 17:53:03 Neel libvirtd[27828]: Cannot access storage file '/run/media/gregh/ESD-USB/autorun.inf': No such file or directory
Dec 31 17:53:10 Neel libvirtd[27828]: Cannot access storage file '/run/media/gregh/ESD-USB/autorun.inf': No such file or directory
Dec 31 17:55:38 Neel libvirtd[27828]: unsupported configuration: TPM version '2.0' is not supported
Dec 31 17:55:40 Neel libvirtd[27828]: unsupported configuration: TPM version '2.0' is not supported
Dec 31 17:55:43 Neel libvirtd[27828]: unsupported configuration: TPM version '2.0' is not supported
Dec 31 17:55:49 Neel libvirtd[27828]: unsupported configuration: TPM version '2.0' is not supported
Dec 31 17:55:51 Neel libvirtd[27828]: unsupported configuration: TPM version '2.0' is not supported
Dec 31 17:56:10 Neel libvirtd[27828]: unsupported configuration: TPM version '2.0' is not supported
Dec 31 18:19:14 Neel libvirtd[27828]: Operation not supported: live attach of device 'video' is not supported
Dec 31 18:20:09 Neel libvirtd[27828]: Unable to read from monitor: Connection reset by peer
...skipping...
Feb 08 22:34:30 Neel kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000029 SMN_C2PMSG_82:0x00000000
Feb 08 22:34:30 Neel kernel: amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
Feb 08 22:34:34 Neel kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000029 SMN_C2PMSG_82:0x00000000
Feb 08 22:34:34 Neel kernel: amdgpu 0000:03:00.0: amdgpu: Failed to retrieve enabled ppfeatures!
-- Boot ac4b0746088641f180926cf19ffbbe33 --
Feb 08 22:35:11 archlinux kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
-- Boot 1fed0278d4f84eeea7541128d5d82b77 --
Feb 08 22:36:17 archlinux kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 08 22:36:19 Neel kernel: snd_hda_intel 0000:73:00.6: no codecs found!
Feb 08 22:36:20 Neel libvirtd[1093]: cannot open directory '/run/media/gregh/ESD-USB': No such file or directory
Feb 08 22:36:20 Neel libvirtd[1093]: internal error: Failed to autostart storage pool 'ESD-USB': cannot open directory '/run/media/gregh/ESD-USB': No such file or di>
Feb 08 22:36:33 Neel dbus-broker-launch[1002]: Activation request for 'org.freedesktop.nm_dispatcher' failed.
Feb 08 22:36:33 Neel kernel: watchdog: watchdog0: watchdog did not stop!
-- Boot 666b2a83ddcf486683aec8a1555caa0d --
Feb 08 22:37:07 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 08 22:37:08 Neel kernel: snd_hda_intel 0000:73:00.6: no codecs found!
Feb 08 22:37:10 Neel libvirtd[869]: cannot open directory '/run/media/gregh/ESD-USB': No such file or directory
Feb 08 22:37:10 Neel libvirtd[869]: internal error: Failed to autostart storage pool 'ESD-USB': cannot open directory '/run/media/gregh/ESD-USB': No such file or dir>
Feb 08 22:37:22 Neel org_kde_powerdevil[1433]: busno=8, sleep-multiplier = 1.60. Testing for supported feature 0x10 returned Error_Info[DDCRC_DPMS_ASLEEP in ddc_wri>
Feb 08 22:46:25 Neel dbus-broker-launch[780]: Activation request for 'org.freedesktop.nm_dispatcher' failed.
Feb 08 22:46:26 Neel kernel: watchdog: watchdog0: watchdog did not stop!
-- Boot 29fc5c2138b44585a707ff2d38b8d104 --
Feb 08 22:47:05 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
-- Boot 590d0dc9f5d843148104a57286a18dae --
Feb 08 22:48:16 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 08 22:48:18 Neel kernel: snd_hda_intel 0000:73:00.6: no codecs found!
Feb 08 22:48:19 Neel libvirtd[883]: cannot open directory '/run/media/gregh/ESD-USB': No such file or directory
Feb 08 22:48:19 Neel libvirtd[883]: internal error: Failed to autostart storage pool 'ESD-USB': cannot open directory '/run/media/gregh/ESD-USB': No such file or dir>
Feb 08 22:48:35 Neel org_kde_powerdevil[1454]: busno=8, sleep-multiplier = 1.60. Testing for supported feature 0x10 returned Error_Info[DDCRC_DPMS_ASLEEP in ddc_wri>
Feb 08 22:52:26 Neel systemd-coredump[3218]: [?] Process 3145 (sddm-greeter-qt) of user 961 dumped core.
Module [dso] without build-id.
Stack trace of thread 3186:
#0 0x000075d2847a4cee n/a (n/a + 0x0)
#1 0x000075d264a4c8e6 n/a (n/a + 0x0)
#2 0x000075d264a48f1e n/a (n/a + 0x0)
#3 0x000075d28404e391 n/a (n/a + 0x0)
#4 0x000075d28404e46e n/a (n/a + 0x0)
#5 0x000075d2844fa6cb n/a (n/a + 0x0)
#6 0x000075d2844fd75c n/a (n/a + 0x0)
#7 0x000075d284501cb9 n/a (n/a + 0x0)
#8 0x000075d284501f76 n/a (n/a + 0x0)
#9 0x000075d27f107185 n/a (n/a + 0x0)
#10 0x000075d28051cb7e n/a (n/a + 0x0)
#11 0x000075d2852fb25e n/a (n/a + 0x0)
#12 0x000075d2853173df n/a (n/a + 0x0)
#13 0x000075d2851af9a2 n/a (n/a + 0x0)
#14 0x000075d2864450bf n/a (n/a + 0x0)
#15 0x000075d28644600a n/a (n/a + 0x0)
#16 0x000075d2848d8a9b n/a (n/a + 0x0)
#17 0x000075d2840a370a n/a (n/a + 0x0)
#18 0x000075d284127aac n/a (n/a + 0x0)
ELF object binary architecture: AMD x86-64
lines 1479-1531/1531 (END) Edit Also found some amdgpu errors:
-- Boot b2f7fa901d3942f9b93ace278aeb429d --
Feb 08 22:33:53 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 08 22:33:55 Neel kernel: snd_hda_intel 0000:73:00.6: no codecs found!
Feb 08 22:33:56 Neel libvirtd[866]: cannot open directory '/run/media/gregh/ESD-USB': No such file or directory
Feb 08 22:33:56 Neel libvirtd[866]: internal error: Failed to autostart storage pool 'ESD-USB': cannot open directory '/run/media/gregh/ESD-USB': No such file or dir>
Feb 08 22:34:10 Neel kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000029 SMN_C2PMSG_82:0x00000000
Feb 08 22:34:10 Neel kernel: amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
Feb 08 22:34:14 Neel kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000029 SMN_C2PMSG_82:0x00000000
Feb 08 22:34:14 Neel kernel: amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
Feb 08 22:34:18 Neel kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000029 SMN_C2PMSG_82:0x00000000
Feb 08 22:34:18 Neel kernel: amdgpu 0000:03:00.0: amdgpu: Failed to retrieve enabled ppfeatures!
Feb 08 22:34:22 Neel kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000029 SMN_C2PMSG_82:0x00000000
Feb 08 22:34:22 Neel kernel: amdgpu 0000:03:00.0: amdgpu: Failed to retrieve enabled ppfeatures!
Feb 08 22:34:26 Neel kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000029 SMN_C2PMSG_82:0x00000000
Feb 08 22:34:26 Neel kernel: amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
Feb 08 22:34:30 Neel kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000029 SMN_C2PMSG_82:0x00000000
Feb 08 22:34:30 Neel kernel: amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
Feb 08 22:34:34 Neel kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000029 SMN_C2PMSG_82:0x00000000
Feb 08 22:34:34 Neel kernel: amdgpu 0000:03:00.0: amdgpu: Failed to retrieve enabled ppfeatures!
-- Boot ac4b0746088641f180926cf19ffbbe33 --
Feb 08 22:35:11 archlinux kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
-- Boot 1fed0278d4f84eeea7541128d5d82b77 --
Feb 08 22:36:17 archlinux kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 08 22:36:19 Neel kernel: snd_hda_intel 0000:73:00.6: no codecs found!
Feb 08 22:36:20 Neel libvirtd[1093]: cannot open directory '/run/media/gregh/ESD-USB': No such file or directory
Feb 08 22:36:20 Neel libvirtd[1093]: internal error: Failed to autostart storage pool 'ESD-USB': cannot open directory '/run/media/gregh/ESD-USB': No such file or di>
Feb 08 22:36:33 Neel dbus-broker-launch[1002]: Activation request for 'org.freedesktop.nm_dispatcher' failed.
Feb 08 22:36:33 Neel kernel: watchdog: watchdog0: watchdog did not stop!
-- Boot 666b2a83ddcf486683aec8a1555caa0d --
Feb 08 22:37:07 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 08 22:37:08 Neel kernel: snd_hda_intel 0000:73:00.6: no codecs found!
Feb 08 22:37:10 Neel libvirtd[869]: cannot open directory '/run/media/gregh/ESD-USB': No such file or directory
Feb 08 22:37:10 Neel libvirtd[869]: internal error: Failed to autostart storage pool 'ESD-USB': cannot open directory '/run/media/gregh/ESD-USB': No such file or dir>
Feb 08 22:37:22 Neel org_kde_powerdevil[1433]: busno=8, sleep-multiplier = 1.60. Testing for supported feature 0x10 returned Error_Info[DDCRC_DPMS_ASLEEP in ddc_wri>
Feb 08 22:46:25 Neel dbus-broker-launch[780]: Activation request for 'org.freedesktop.nm_dispatcher' failed.
Feb 08 22:46:26 Neel kernel: watchdog: watchdog0: watchdog did not stop!
-- Boot 29fc5c2138b44585a707ff2d38b8d104 --
Feb 08 22:47:05 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
-- Boot 590d0dc9f5d843148104a57286a18dae --
Feb 08 22:48:16 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 08 22:48:18 Neel kernel: snd_hda_intel 0000:73:00.6: no codecs found!
Feb 08 22:48:19 Neel libvirtd[883]: cannot open directory '/run/media/gregh/ESD-USB': No such file or directory
Feb 08 22:48:19 Neel libvirtd[883]: internal error: Failed to autostart storage pool 'ESD-USB': cannot open directory '/run/media/gregh/ESD-USB': No such file or dir>
Feb 08 22:48:35 Neel org_kde_powerdevil[1454]: busno=8, sleep-multiplier = 1.60. Testing for supported feature 0x10 returned Error_Info[DDCRC_DPMS_ASLEEP in ddc_wri>
Feb 08 22:52:26 Neel systemd-coredump[3218]: [?] Process 3145 (sddm-greeter-qt) of user 961 dumped core.
Module [dso] without build-id.
Stack trace of thread 3186:
#0 0x000075d2847a4cee n/a (n/a + 0x0)
#1 0x000075d264a4c8e6 n/a (n/a + 0x0)
#2 0x000075d264a48f1e n/a (n/a + 0x0)
#3 0x000075d28404e391 n/a (n/a + 0x0)
#4 0x000075d28404e46e n/a (n/a + 0x0)
#5 0x000075d2844fa6cb n/a (n/a + 0x0)
#6 0x000075d2844fd75c n/a (n/a + 0x0)
#7 0x000075d284501cb9 n/a (n/a + 0x0)
#8 0x000075d284501f76 n/a (n/a + 0x0)
#9 0x000075d27f107185 n/a (n/a + 0x0)
#10 0x000075d28051cb7e n/a (n/a + 0x0)
#11 0x000075d2852fb25e n/a (n/a + 0x0)
#12 0x000075d2853173df n/a (n/a + 0x0)
#13 0x000075d2851af9a2 n/a (n/a + 0x0)
#14 0x000075d2864450bf n/a (n/a + 0x0)
#15 0x000075d28644600a n/a (n/a + 0x0)
#16 0x000075d2848d8a9b n/a (n/a + 0x0)
#17 0x000075d2840a370a n/a (n/a + 0x0)
#18 0x000075d284127aac n/a (n/a + 0x0)
ELF object binary architecture: AMD x86-64
lines 1479-1531/1531 (END) Let me know if you would like to see anything else. Thanks,
Last edited by greg5 (2025-02-09 04:15:03)
Offline
Now there is newer mainline kernel 6.13.2.arch1-1 - you can try it and linux-lts package also.
Offline
Now there is newer mainline kernel 6.13.2.arch1-1 - you can try it and linux-lts package also.
Thanks for the reply Xerxes!
Updated to 6.13.2.arch1-1 and it still crashes if I choose wayland to login to first.
Installed the lts kernel and it got further than the black screen, but still crashed before I could move the mouse anywhere.
Wayland issue?
recent logs:
-- Boot 6dbc9669f126463a995bad1854c4dd8c --
Feb 09 06:16:30 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 09 06:16:32 Neel kernel: snd_hda_intel 0000:73:00.6: no codecs found!
Feb 09 06:16:33 Neel libvirtd[867]: cannot open directory '/run/media/gregh/ESD-USB': No such file or directory
Feb 09 06:16:33 Neel libvirtd[867]: internal error: Failed to autostart storage pool 'ESD-USB': cannot open directory '/run/media/gregh/ESD-USB': No such file or dir>
Feb 09 06:16:49 Neel org_kde_powerdevil[1438]: busno=8, sleep-multiplier = 1.60. Testing for supported feature 0x10 returned Error_Info[DDCRC_DPMS_ASLEEP in ddc_wri>
Feb 09 11:18:15 Neel dbus-broker-launch[774]: Activation request for 'org.freedesktop.nm_dispatcher' failed.
Feb 09 11:18:15 Neel kernel: watchdog: watchdog0: watchdog did not stop!
-- Boot 6dfcfc79942d40d5a8e260bfa14d6ec5 --
Feb 09 11:18:54 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 09 11:18:55 Neel kernel: snd_hda_intel 0000:73:00.6: no codecs found!
Feb 09 11:18:57 Neel libvirtd[866]: cannot open directory '/run/media/gregh/ESD-USB': No such file or directory
Feb 09 11:18:57 Neel libvirtd[866]: internal error: Failed to autostart storage pool 'ESD-USB': cannot open directory '/run/media/gregh/ESD-USB': No such file or dir>
Feb 09 11:19:19 Neel kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000029 SMN_C2PMSG_82:0x00000000
Feb 09 11:19:19 Neel kernel: amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
Feb 09 11:19:24 Neel kernel: amdgpu 0000:03:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000029 SMN_C2PMSG_82:0x00000000
Feb 09 11:19:24 Neel kernel: amdgpu 0000:03:00.0: amdgpu: Failed to disable gfxoff!
-- Boot 2cc5b0410df841959d023ca58cd0d729 --
Feb 09 11:20:10 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 09 11:20:12 Neel kernel: snd_hda_intel 0000:73:00.6: no codecs found!
Feb 09 11:20:13 Neel libvirtd[882]: cannot open directory '/run/media/gregh/ESD-USB': No such file or directory
Feb 09 11:20:13 Neel libvirtd[882]: internal error: Failed to autostart storage pool 'ESD-USB': cannot open directory '/run/media/gregh/ESD-USB': No such file or dir>
Feb 09 11:20:25 Neel org_kde_powerdevil[1445]: busno=8, sleep-multiplier = 1.60. Testing for supported feature 0x10 returned Error_Info[DDCRC_DPMS_ASLEEP in ddc_wri>
Feb 09 11:22:07 Neel systemd-coredump[10057]: Failed to send coredump datagram: Broken pipe
Feb 09 11:22:07 Neel dbus-broker-launch[792]: Activation request for 'org.freedesktop.nm_dispatcher' failed.
Feb 09 11:22:07 Neel kernel: watchdog: watchdog0: watchdog did not stop!
-- Boot 2307832437954a7e995b19c991cd42ac --
Feb 09 11:22:48 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
-- Boot 7a4d31c7f2394bfb8f328290dbf71630 --
Feb 09 11:24:37 Neel kernel: hub 10-0:1.0: config failed, hub doesn't have any ports! (err -19)
Feb 09 11:24:39 Neel kernel: snd_hda_intel 0000:73:00.6: no codecs found!
Feb 09 11:24:40 Neel libvirtd[891]: cannot open directory '/run/media/gregh/ESD-USB': No such file or directory
Feb 09 11:24:40 Neel libvirtd[891]: internal error: Failed to autostart storage pool 'ESD-USB': cannot open directory '/run/media/gregh/ESD-USB': No such file or dir>
Feb 09 11:24:58 Neel org_kde_powerdevil[1474]: busno=8, sleep-multiplier = 1.60. Testing for supported feature 0x10 returned Error_Info[DDCRC_DPMS_ASLEEP in ddc_wri>
Feb 09 11:29:57 Neel systemd[1]: Failed to mount /mnt/nfs/share.
lines 1516-1568/1568 (END)Offline
Update found out it crashes when I change the refresh rate over 60hz. My monitor goes up to 180hz. It used to run fine at 180hz at least for 2 or 3 months since I had this monitor.
Edit:
Ran some stress tests on my video card in windows and no errors showed up. Very odd. Any other ideas where to look?
Edit2:
Re installed arch and I'm still having the same issue. Also of note I can't run anything higher than 60 hz on x11 as well.
Edit3:
Did a full update and rebooted now I only get a black screen with a mouse that moves. Doesn't get to sddm or it crashes. not sure which.
sudo pacman -SyuEdit4:
sddm exits with a 127 error
Last edited by greg5 (2025-02-13 01:19:13)
Offline