droidcam will not function

supermx811 · 2025-02-19 04:27:48

error message: Droidcam/v4l2loopback device not found (/dev/video/[0-9]) Did it install correctly? If you had a kernel update, you may have to reinstall.

problem: i have v4l2loopback installed

System:
Kernel: 6.13.2-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
Desktop: KDE Plasma v: 6.3.0 Distro: Arch Linux
CPU:
Info: 6-core model: 11th Gen Intel Core i5-11400H bits: 64 type: MT MCP
arch: Tiger Lake rev: 1 cache: L1: 480 KiB L2: 7.5 MiB L3: 12 MiB
Speed (MHz): avg: 800 min/max: 800/4500 cores: 1: 800 2: 800 3: 800 4: 800
5: 800 6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 800 bogomips: 64512
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel TigerLake-H GT1 [UHD Graphics] driver: i915 v: kernel
arch: Xe bus-ID: 00:02.0
Display: wayland server: X.org v: 1.21.1.15 with: Xwayland v: 24.1.5
compositor: kwin_wayland driver: X: loaded: modesetting dri: iris gpu: i915
resolution: 1920x1080~60Hz
API: EGL v: 1.5 drivers: iris,swrast platforms:
active: gbm,wayland,x11,surfaceless,device inactive: N/A
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.3.4-arch1.1
glx-v: 1.4 direct-render: yes renderer: Mesa Intel UHD Graphics (TGL GT1)
API: Vulkan v: 1.4.303 drivers: N/A surfaces: xcb,xlib,wayland devices: 1
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor wl: wayland-info
x11: xdpyinfo, xprop, xrandr

(as taken from inxi -SCxGz)

if you need extra information please let me know

impossibleveins23 · 2025-02-19 18:16:50

* Is the kernel module loaded (lsmod|grep v4l)?
* Do you really don't have ls -l /dev/video*?
* Do you see the camera (lsusb|grep -i cam)?
* Are you in video group?

Attach the output from the commands above + dmesg.

Last edited by impossibleveins23 (2025-02-19 18:19:54)

supermx811 · 2025-02-20 00:19:14

lsmod|grep v4l:
videobuf2_v4l2 45056 1 uvcvideo
videobuf2_common 98304 4 videobuf2_vmalloc,videobuf2_v4l2,uvcvideo,videobuf2_memops
videodev 413696 2 videobuf2_v4l2,uvcvideo
mc 98304 5 videodev,snd_usb_audio,videobuf2_v4l2,uvcvideo,videobuf2_common

ls -l /dev/video*:
crw-rw----+ 1 root video 81, 0 Feb 19 18:07 /dev/video0
crw-rw----+ 1 root video 81, 1 Feb 19 18:07 /dev/video1

lsusb|grep -i cam:
Bus 001 Device 003: ID 046d:08e5 Logitech, Inc. C920 PRO HD Webcam

video group:

without sudo:
usermod: Permission denied.
usermod: cannot lock /etc/passwd; try again later.

with sudo:
no message

dmesg:
[ 0.058199] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.058200] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.058201] PM: hibernation: Registered nosave memory: [mem 0x69d66000-0x69ec5fff]
[ 0.058202] PM: hibernation: Registered nosave memory: [mem 0x6a01e000-0x6a01efff]
[ 0.058203] PM: hibernation: Registered nosave memory: [mem 0x6a053000-0x6a053fff]
[ 0.058204] PM: hibernation: Registered nosave memory: [mem 0x6d9a0000-0x6d9a0fff]
[ 0.058205] PM: hibernation: Registered nosave memory: [mem 0x6d9eb000-0x6d9ebfff]
[ 0.058205] PM: hibernation: Registered nosave memory: [mem 0x70573000-0x73672fff]
[ 0.058206] PM: hibernation: Registered nosave memory: [mem 0x73673000-0x7373efff]
[ 0.058206] PM: hibernation: Registered nosave memory: [mem 0x7373f000-0x7381cfff]
[ 0.058207] PM: hibernation: Registered nosave memory: [mem 0x7381d000-0x73efefff]
[ 0.058207] PM: hibernation: Registered nosave memory: [mem 0x73f00000-0x79ffffff]
[ 0.058208] PM: hibernation: Registered nosave memory: [mem 0x7a000000-0x7a9fffff]
[ 0.058208] PM: hibernation: Registered nosave memory: [mem 0x7aa00000-0x7abfffff]
[ 0.058209] PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0x7affffff]
[ 0.058209] PM: hibernation: Registered nosave memory: [mem 0x7b000000-0x803fffff]
[ 0.058209] PM: hibernation: Registered nosave memory: [mem 0x80400000-0xfdffffff]
[ 0.058210] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.058210] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.058210] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.058211] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.058211] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.058211] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff]
[ 0.058212] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
[ 0.058212] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff]
[ 0.058212] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.058213] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.058213] [mem 0x80400000-0xfdffffff] available for PCI devices
[ 0.058214] Booting paravirtualized kernel on bare hardware
[ 0.058216] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.062972] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.063560] percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u524288
[ 0.063565] pcpu-alloc: s237568 r8192 d28672 u524288 alloc=1*2097152
[ 0.063566] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07
[ 0.063569] pcpu-alloc: [0] 08 09 10 11
[ 0.063579] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-zen root=UUID=4b253574-fa0d-4251-bc28-9c45d6d514ec rw loglevel=3 quiet
[ 0.063622] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux-zen", will be passed to user space.
[ 0.063633] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.064839] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.065440] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.065563] Fallback order for Node 0: 0
[ 0.065566] Built 1 zonelists, mobility grouping on. Total pages: 4129041
[ 0.065567] Policy zone: Normal
[ 0.065760] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.065769] software IO TLB: area num 16.
[ 0.098875] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.098907] ftrace: allocating 49175 entries in 193 pages
[ 0.112567] ftrace: allocated 193 pages with 3 groups
[ 0.112641] Dynamic Preempt: full
[ 0.112691] rcu: Preemptible hierarchical RCU implementation.
[ 0.112692] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
[ 0.112692] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.112693] Trampoline variant of Tasks RCU enabled.
[ 0.112693] Rude variant of Tasks RCU enabled.
[ 0.112694] Tracing variant of Tasks RCU enabled.
[ 0.112694] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.112695] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 0.112702] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[ 0.112704] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[ 0.112706] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[ 0.115978] NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16
[ 0.116272] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.116523] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.116548] Console: colour dummy device 80x25
[ 0.116549] printk: legacy console [tty0] enabled
[ 0.116583] ACPI: Core revision 20240827
[ 0.116941] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.117052] APIC: Switch to symmetric I/O mode setup
[ 0.117053] DMAR: Host address width 39
[ 0.117054] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.117058] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
[ 0.117060] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.117064] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.117066] DMAR: RMRR base: 0x0000007c000000 end: 0x000000803fffff
[ 0.117069] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.117070] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.117071] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.118711] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.118713] x2apic enabled
[ 0.118775] APIC: Switched APIC routing to: cluster x2apic
[ 0.123437] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.128012] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26bef67878b, max_idle_ns: 440795293631 ns
[ 0.128018] Calibrating delay loop (skipped), value calculated using timer frequency.. 5376.00 BogoMIPS (lpj=2688000)
[ 0.128045] CPU0: Thermal monitoring enabled (TM1)
[ 0.128047] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.128147] CET detected: Indirect Branch Tracking enabled
[ 0.128149] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.128149] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.128151] process: using mwait in idle threads
[ 0.128153] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.128155] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit
[ 0.128156] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[ 0.128157] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.128157] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[ 0.128158] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.128159] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.128160] GDS: Vulnerable: No microcode
[ 0.128166] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.128167] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.128168] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.128168] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'
[ 0.128169] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'
[ 0.128169] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'
[ 0.128170] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.128171] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[ 0.128171] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.128172] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64
[ 0.128173] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512
[ 0.128174] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024
[ 0.128174] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8
[ 0.128175] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16
[ 0.128176] x86/fpu: Enabled xstate features 0xae7, context size is 2456 bytes, using 'compacted' format.
[ 0.146838] Freeing SMP alternatives memory: 52K
[ 0.146840] pid_max: default: 32768 minimum: 301
[ 0.148770] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[ 0.148833] landlock: Up and running.
[ 0.148835] Yama: becoming mindful.
[ 0.148978] LSM support for eBPF active
[ 0.149010] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.149026] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.149397] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i5-11400H @ 2.70GHz (family: 0x6, model: 0x8d, stepping: 0x1)
[ 0.150081] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.150104] ... version: 5
[ 0.150105] ... bit width: 48
[ 0.150105] ... generic registers: 8
[ 0.150106] ... value mask: 0000ffffffffffff
[ 0.150106] ... max period: 00007fffffffffff
[ 0.150107] ... fixed-purpose events: 4
[ 0.150107] ... event mask: 0001000f000000ff
[ 0.150192] signal: max sigframe size: 3632
[ 0.150204] Estimated ratio of average max frequency by base frequency (times 1024): 1630
[ 0.150218] rcu: Hierarchical SRCU implementation.
[ 0.150219] rcu: Max phase no-delay instances is 400.
[ 0.150251] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[ 0.150750] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.151026] smp: Bringing up secondary CPUs ...
[ 0.151079] smpboot: x86: Booting SMP configuration:
[ 0.151080] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
[ 0.156047] smp: Brought up 1 node, 12 CPUs
[ 0.156047] smpboot: Total of 12 processors activated (64512.00 BogoMIPS)
[ 0.157079] Memory: 16064292K/16516164K available (20480K kernel code, 2694K rwdata, 14212K rodata, 4432K init, 3672K bss, 428644K reserved, 0K cma-reserved)
[ 0.157396] devtmpfs: initialized
[ 0.157396] x86/mm: Memory block size: 128MB
[ 0.158275] ACPI: PM: Registering ACPI NVS region [mem 0x7373f000-0x7381cfff] (909312 bytes)
[ 0.158275] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.158275] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.158275] pinctrl core: initialized pinctrl subsystem
[ 0.158319] PM: RTC time: 00:07:34, date: 2025-02-20
[ 0.158610] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.159054] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.159142] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.159227] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.159232] audit: initializing netlink subsys (disabled)
[ 0.159237] audit: type=2000 audit(1740010054.038:1): state=initialized audit_enabled=0 res=1
[ 0.159237] thermal_sys: Registered thermal governor 'fair_share'
[ 0.159237] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.159237] thermal_sys: Registered thermal governor 'step_wise'
[ 0.159237] thermal_sys: Registered thermal governor 'user_space'
[ 0.159237] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.159237] cpuidle: using governor ladder
[ 0.159237] cpuidle: using governor menu
[ 0.159237] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.159237] PCI: ECAM [mem 0xc0000000-0xc03fffff] (base 0xc0000000) for domain 0000 [bus 00-03]
[ 0.159237] PCI: Using configuration type 1 for base access
[ 0.159237] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.159237] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.159237] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.159237] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.159237] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.160019] ACPI: Added _OSI(Module Device)
[ 0.160020] ACPI: Added _OSI(Processor Device)
[ 0.160021] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.160021] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.206403] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20240827/dswload2-162)
[ 0.206408] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240827/psobject-220)
[ 0.206410] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.206412] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20240827/dswload2-162)
[ 0.206414] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240827/psobject-220)
[ 0.206416] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.206417] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS03], AE_NOT_FOUND (20240827/dswload2-162)
[ 0.206419] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240827/psobject-220)
[ 0.206420] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.206422] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS04], AE_NOT_FOUND (20240827/dswload2-162)
[ 0.206423] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20240827/psobject-220)
[ 0.206424] ACPI: Skipping parse of AML opcode: Scope (0x0010)
[ 0.207381] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.214328] ACPI: Dynamic OEM Table Load:
[ 0.214334] ACPI: SSDT 0xFFFF9872C17EEC00 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20191018)
[ 0.215031] ACPI: Dynamic OEM Table Load:
[ 0.215036] ACPI: SSDT 0xFFFF9872C17E4000 0005A2 (v02 PmRef Cpu0Ist 00003000 INTL 20191018)
[ 0.215666] ACPI: Dynamic OEM Table Load:
[ 0.215670] ACPI: SSDT 0xFFFF9872C247FC00 0001CB (v02 PmRef Cpu0Psd 00003000 INTL 20191018)
[ 0.216221] ACPI: Dynamic OEM Table Load:
[ 0.216225] ACPI: SSDT 0xFFFF9872C17EA400 00028B (v02 PmRef Cpu0Hwp 00003000 INTL 20191018)
[ 0.216925] ACPI: Dynamic OEM Table Load:
[ 0.216929] ACPI: SSDT 0xFFFF9872C17F4000 0008E7 (v02 PmRef ApIst 00003000 INTL 20191018)
[ 0.217628] ACPI: Dynamic OEM Table Load:
[ 0.217632] ACPI: SSDT 0xFFFF9872C17E3000 00048A (v02 PmRef ApHwp 00003000 INTL 20191018)
[ 0.218267] ACPI: Dynamic OEM Table Load:
[ 0.218270] ACPI: SSDT 0xFFFF9872C17E2000 0004D4 (v02 PmRef ApPsd 00003000 INTL 20191018)
[ 0.218903] ACPI: Dynamic OEM Table Load:
[ 0.218907] ACPI: SSDT 0xFFFF9872C17E5000 00048A (v02 PmRef ApCst 00003000 INTL 20191018)
[ 0.223641] ACPI: Interpreter enabled
[ 0.223679] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.223680] ACPI: Using IOAPIC for interrupt routing
[ 0.224567] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.224568] PCI: Using E820 reservations for host bridge windows
[ 0.225419] ACPI: Enabled 7 GPEs in block 00 to 7F
[ 0.230498] ACPI: \_SB_.PC00.RP08.PXSX.WRST: New power resource
[ 0.230513] ACPI: \_SB_.PC00.RP08.PXSX.DRST: New power resource
[ 0.235949] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.235952] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS07._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.235970] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.235972] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS08._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.236568] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.236570] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS09._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.236588] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.236590] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS10._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.236937] ACPI: \_SB_.PC00.XHCI.RHUB.HS14.BTRT: New power resource
[ 0.238843] ACPI: \_SB_.PC00.SAT0.VOL0.V0PR: New power resource
[ 0.238932] ACPI: \_SB_.PC00.SAT0.VOL1.V1PR: New power resource
[ 0.239010] ACPI: \_SB_.PC00.SAT0.VOL2.V2PR: New power resource
[ 0.244302] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
[ 0.252872] ACPI: \_TZ_.FN00: New power resource
[ 0.252911] ACPI: \_TZ_.FN01: New power resource
[ 0.252948] ACPI: \_TZ_.FN02: New power resource
[ 0.252985] ACPI: \_TZ_.FN03: New power resource
[ 0.253022] ACPI: \_TZ_.FN04: New power resource
[ 0.253459] ACPI: \PIN_: New power resource
[ 0.253713] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-03])
[ 0.253717] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.256311] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[ 0.257903] PCI host bridge to bus 0000:00
[ 0.257906] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.257907] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.257908] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.257909] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.257910] pci_bus 0000:00: root bus resource [mem 0x80400000-0xbfffffff window]
[ 0.257910] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[ 0.257911] pci_bus 0000:00: root bus resource [bus 00-03]
[ 0.258001] pci 0000:00:00.0: [8086:9a26] type 00 class 0x060000 conventional PCI endpoint
[ 0.258094] pci 0000:00:02.0: [8086:9a68] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[ 0.258102] pci 0000:00:02.0: BAR 0 [mem 0x6000000000-0x6000ffffff 64bit]
[ 0.258107] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref]
[ 0.258110] pci 0000:00:02.0: BAR 4 [io 0x3000-0x303f]
[ 0.258124] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
[ 0.258126] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.258149] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit]
[ 0.258150] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit]: contains BAR 0 for 7 VFs
[ 0.258154] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-0x1fffffff 64bit pref]
[ 0.258155] pci 0000:00:02.0: VF BAR 2 [mem 0x00000000-0xdfffffff 64bit pref]: contains BAR 2 for 7 VFs
[ 0.258279] pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000 conventional PCI endpoint
[ 0.258294] pci 0000:00:04.0: BAR 0 [mem 0x6001100000-0x600111ffff 64bit]
[ 0.258548] pci 0000:00:08.0: [8086:9a11] type 00 class 0x088000 conventional PCI endpoint
[ 0.258555] pci 0000:00:08.0: BAR 0 [mem 0x600114b000-0x600114bfff 64bit]
[ 0.258633] pci 0000:00:0a.0: [8086:9a0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
[ 0.258640] pci 0000:00:0a.0: BAR 0 [mem 0x6001130000-0x6001137fff 64bit]
[ 0.258660] pci 0000:00:0a.0: enabling Extended Tags
[ 0.258771] pci 0000:00:14.0: [8086:43ed] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.258788] pci 0000:00:14.0: BAR 0 [mem 0x6001120000-0x600112ffff 64bit]
[ 0.258859] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.260402] pci 0000:00:14.2: [8086:43ef] type 00 class 0x050000 conventional PCI endpoint
[ 0.260420] pci 0000:00:14.2: BAR 0 [mem 0x600113c000-0x600113ffff 64bit]
[ 0.260432] pci 0000:00:14.2: BAR 2 [mem 0x600114a000-0x600114afff 64bit]
[ 0.260646] pci 0000:00:15.0: [8086:43e8] type 00 class 0x0c8000 conventional PCI endpoint
[ 0.260673] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[ 0.261088] pci 0000:00:15.1: [8086:43e9] type 00 class 0x0c8000 conventional PCI endpoint
[ 0.261116] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[ 0.261531] pci 0000:00:15.2: [8086:43ea] type 00 class 0x0c8000 conventional PCI endpoint
[ 0.261558] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[ 0.261973] pci 0000:00:15.3: [8086:43eb] type 00 class 0x0c8000 conventional PCI endpoint
[ 0.262000] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[ 0.262335] pci 0000:00:16.0: [8086:43e0] type 00 class 0x078000 conventional PCI endpoint
[ 0.262356] pci 0000:00:16.0: BAR 0 [mem 0x6001145000-0x6001145fff 64bit]
[ 0.262435] pci 0000:00:16.0: PME# supported from D3hot
[ 0.262780] pci 0000:00:17.0: [8086:43d3] type 00 class 0x010601 conventional PCI endpoint
[ 0.262795] pci 0000:00:17.0: BAR 0 [mem 0x80900000-0x80901fff]
[ 0.262805] pci 0000:00:17.0: BAR 1 [mem 0x80903000-0x809030ff]
[ 0.262815] pci 0000:00:17.0: BAR 2 [io 0x3090-0x3097]
[ 0.262824] pci 0000:00:17.0: BAR 3 [io 0x3080-0x3083]
[ 0.262834] pci 0000:00:17.0: BAR 4 [io 0x3060-0x307f]
[ 0.262843] pci 0000:00:17.0: BAR 5 [mem 0x80902000-0x809027ff]
[ 0.262887] pci 0000:00:17.0: PME# supported from D3hot
[ 0.263263] pci 0000:00:19.0: [8086:43ad] type 00 class 0x0c8000 conventional PCI endpoint
[ 0.263290] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[ 0.263721] pci 0000:00:19.1: [8086:43ae] type 00 class 0x0c8000 conventional PCI endpoint
[ 0.263748] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[ 0.264110] pci 0000:00:1c.0: [8086:43bc] type 01 class 0x060400 PCIe Root Port
[ 0.264136] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.264142] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x806fffff]
[ 0.264224] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.264258] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
[ 0.264783] pci 0000:00:1c.7: [8086:43bf] type 01 class 0x060400 PCIe Root Port
[ 0.264809] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.264815] pci 0000:00:1c.7: bridge window [mem 0x80800000-0x808fffff]
[ 0.264894] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.264929] pci 0000:00:1c.7: PTM enabled (root), 4ns granularity
[ 0.265424] pci 0000:00:1d.0: [8086:43b0] type 01 class 0x060400 PCIe Root Port
[ 0.265450] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.265455] pci 0000:00:1d.0: bridge window [mem 0x80700000-0x807fffff]
[ 0.265534] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.265569] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[ 0.266181] pci 0000:00:1e.0: [8086:43a8] type 00 class 0x078000 conventional PCI endpoint
[ 0.266208] pci 0000:00:1e.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[ 0.266662] pci 0000:00:1e.3: [8086:43ab] type 00 class 0x0c8000 conventional PCI endpoint
[ 0.266689] pci 0000:00:1e.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
[ 0.267019] pci 0000:00:1f.0: [8086:438b] type 00 class 0x060100 conventional PCI endpoint
[ 0.267315] pci 0000:00:1f.3: [8086:43c8] type 00 class 0x040300 conventional PCI endpoint
[ 0.267355] pci 0000:00:1f.3: BAR 0 [mem 0x6001138000-0x600113bfff 64bit]
[ 0.267407] pci 0000:00:1f.3: BAR 4 [mem 0x6001000000-0x60010fffff 64bit]
[ 0.267507] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.267871] pci 0000:00:1f.4: [8086:43a3] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.267894] pci 0000:00:1f.4: BAR 0 [mem 0x6001140000-0x60011400ff 64bit]
[ 0.267921] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
[ 0.268129] pci 0000:00:1f.5: [8086:43a4] type 00 class 0x0c8000 conventional PCI endpoint
[ 0.268146] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
[ 0.268327] pci 0000:01:00.0: [8086:15f3] type 00 class 0x020000 PCIe Endpoint
[ 0.268348] pci 0000:01:00.0: BAR 0 [mem 0x80500000-0x805fffff]
[ 0.268381] pci 0000:01:00.0: BAR 3 [mem 0x80600000-0x80603fff]
[ 0.268414] pci 0000:01:00.0: ROM [mem 0x80400000-0x804fffff pref]
[ 0.268519] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.268728] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.268803] pci 0000:02:00.0: [8086:2725] type 00 class 0x028000 PCIe Endpoint
[ 0.268829] pci 0000:02:00.0: BAR 0 [mem 0x80800000-0x80803fff 64bit]
[ 0.268971] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.269768] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.269837] pci 0000:03:00.0: [1987:5013] type 00 class 0x010802 PCIe Endpoint
[ 0.269861] pci 0000:03:00.0: BAR 0 [mem 0x80700000-0x80703fff 64bit]
[ 0.270145] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.271009] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.271080] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[ 0.271149] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.271217] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.271285] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.271353] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.271422] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.271491] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.277038] iommu: Default domain type: Translated
[ 0.277038] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.277104] SCSI subsystem initialized
[ 0.277109] libata version 3.00 loaded.
[ 0.277109] ACPI: bus type USB registered
[ 0.277109] usbcore: registered new interface driver usbfs
[ 0.277109] usbcore: registered new interface driver hub
[ 0.277109] usbcore: registered new device driver usb
[ 0.277109] EDAC MC: Ver: 3.0.0
[ 0.278082] efivars: Registered efivars operations
[ 0.278149] NetLabel: Initializing
[ 0.278150] NetLabel: domain hash size = 128
[ 0.278151] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.278159] NetLabel: unlabeled traffic allowed by default
[ 0.278162] mctp: management component transport protocol core
[ 0.278162] NET: Registered PF_MCTP protocol family
[ 0.278169] PCI: Using ACPI for IRQ routing
[ 0.278170] PCI: pci_cache_line_size set to 64 bytes
[ 0.278361] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
[ 0.278479] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.278479] e820: reserve RAM buffer [mem 0x69d66000-0x6bffffff]
[ 0.278479] e820: reserve RAM buffer [mem 0x6a01e018-0x6bffffff]
[ 0.278479] e820: reserve RAM buffer [mem 0x6d9a0000-0x6fffffff]
[ 0.278479] e820: reserve RAM buffer [mem 0x6d9eb000-0x6fffffff]
[ 0.278479] e820: reserve RAM buffer [mem 0x70573000-0x73ffffff]
[ 0.278479] e820: reserve RAM buffer [mem 0x73f00000-0x73ffffff]
[ 0.278479] e820: reserve RAM buffer [mem 0x47fc00000-0x47fffffff]
[ 0.278479] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.278479] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.278479] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.278479] vgaarb: loaded
[ 0.279044] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.279049] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[ 0.281054] clocksource: Switched to clocksource tsc-early
[ 0.281384] VFS: Disk quotas dquot_6.6.0
[ 0.281389] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.281426] pnp: PnP ACPI init
[ 0.281590] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.281592] system 00:00: [io 0x0a10-0x0a1f] has been reserved
[ 0.281593] system 00:00: [io 0x0a20-0x0a2f] has been reserved
[ 0.281594] system 00:00: [io 0x0a30-0x0a3f] has been reserved
[ 0.281696] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.281697] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.281776] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.282281] pnp 00:03: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[ 0.282297] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
[ 0.282298] system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved
[ 0.282299] system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved
[ 0.282300] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
[ 0.282301] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.282302] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.282303] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.282926] system 00:04: [io 0x1800-0x18fe] could not be reserved
[ 0.282927] system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.282928] system 00:04: [mem 0xfe04c000-0xfe04ffff] has been reserved
[ 0.282929] system 00:04: [mem 0xfe050000-0xfe0affff] has been reserved
[ 0.282930] system 00:04: [mem 0xfe0d0000-0xfe0fffff] has been reserved
[ 0.282931] system 00:04: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.282932] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.282933] system 00:04: [mem 0xfd000000-0xfd68ffff] has been reserved
[ 0.282934] system 00:04: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.282935] system 00:04: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.283163] system 00:05: [io 0x2000-0x20fe] has been reserved
[ 0.283442] pnp: PnP ACPI: found 7 devices
[ 0.288611] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.288647] NET: Registered PF_INET protocol family
[ 0.288758] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.297286] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.297309] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.297356] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.297516] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.297624] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.297684] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.297729] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.297782] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.297838] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.297842] NET: Registered PF_XDP protocol family
[ 0.297855] pci 0000:00:02.0: VF BAR 2 [mem 0x4020000000-0x40ffffffff 64bit pref]: assigned
[ 0.297860] pci 0000:00:02.0: VF BAR 0 [mem 0x4010000000-0x4016ffffff 64bit]: assigned
[ 0.297862] pci 0000:00:15.0: BAR 0 [mem 0x4017000000-0x4017000fff 64bit]: assigned
[ 0.297922] pci 0000:00:15.1: BAR 0 [mem 0x4017001000-0x4017001fff 64bit]: assigned
[ 0.297983] pci 0000:00:15.2: BAR 0 [mem 0x4017002000-0x4017002fff 64bit]: assigned
[ 0.298000] pci 0000:00:15.3: BAR 0 [mem 0x4017003000-0x4017003fff 64bit]: assigned
[ 0.298014] pci 0000:00:19.0: BAR 0 [mem 0x4017004000-0x4017004fff 64bit]: assigned
[ 0.298031] pci 0000:00:19.1: BAR 0 [mem 0x4017005000-0x4017005fff 64bit]: assigned
[ 0.298047] pci 0000:00:1e.0: BAR 0 [mem 0x4017006000-0x4017006fff 64bit]: assigned
[ 0.298064] pci 0000:00:1e.3: BAR 0 [mem 0x4017007000-0x4017007fff 64bit]: assigned
[ 0.298080] resource: avoiding allocation from e820 entry [mem 0x0009f000-0x000fffff]
[ 0.298081] resource: avoiding allocation from e820 entry [mem 0x0009f000-0x000fffff]
[ 0.298082] pci 0000:00:1f.5: BAR 0 [mem 0x80904000-0x80904fff]: assigned
[ 0.298093] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.298097] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x806fffff]
[ 0.298103] pci 0000:00:1c.7: PCI bridge to [bus 02]
[ 0.298107] pci 0000:00:1c.7: bridge window [mem 0x80800000-0x808fffff]
[ 0.298113] pci 0000:00:1d.0: PCI bridge to [bus 03]
[ 0.298117] pci 0000:00:1d.0: bridge window [mem 0x80700000-0x807fffff]
[ 0.298124] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.298125] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.298126] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.298126] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window]
[ 0.298127] pci_bus 0000:00: resource 8 [mem 0x80400000-0xbfffffff window]
[ 0.298128] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window]
[ 0.298129] pci_bus 0000:01: resource 1 [mem 0x80400000-0x806fffff]
[ 0.298130] pci_bus 0000:02: resource 1 [mem 0x80800000-0x808fffff]
[ 0.298130] pci_bus 0000:03: resource 1 [mem 0x80700000-0x807fffff]
[ 0.298741] PCI: CLS 64 bytes, default 64
[ 0.298779] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.298780] software IO TLB: mapped [mem 0x0000000062ecc000-0x0000000066ecc000] (64MB)
[ 0.298803] Trying to unpack rootfs image as initramfs...
[ 0.298804] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26bef67878b, max_idle_ns: 440795293631 ns
[ 0.298832] clocksource: Switched to clocksource tsc
[ 0.298854] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.315368] Initialise system trusted keyrings
[ 0.315376] Key type blacklist registered
[ 0.315422] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.315484] fuse: init (API version 7.41)
[ 0.315528] integrity: Platform Keyring initialized
[ 0.315530] integrity: Machine keyring initialized
[ 0.321460] Key type asymmetric registered
[ 0.321462] Asymmetric key parser 'x509' registered
[ 0.321475] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.321526] io scheduler mq-deadline registered
[ 0.321527] io scheduler kyber registered
[ 0.321532] io scheduler bfq registered
[ 0.324643] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.324924] pcieport 0000:00:1c.0: PME: Signaling with IRQ 120
[ 0.325021] pcieport 0000:00:1c.0: AER: enabled with IRQ 120
[ 0.325049] pcieport 0000:00:1c.0: DPC: enabled with IRQ 120
[ 0.325050] pcieport 0000:00:1c.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 0.325242] pcieport 0000:00:1c.7: PME: Signaling with IRQ 121
[ 0.325279] pcieport 0000:00:1c.7: AER: enabled with IRQ 121
[ 0.325310] pcieport 0000:00:1c.7: DPC: enabled with IRQ 121
[ 0.325311] pcieport 0000:00:1c.7: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 0.325494] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[ 0.325530] pcieport 0000:00:1d.0: AER: enabled with IRQ 122
[ 0.325556] pcieport 0000:00:1d.0: DPC: enabled with IRQ 122
[ 0.325556] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 0.325647] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.325729] Freeing initrd memory: 18304K
[ 0.325796] Monitor-Mwait will be used to enter C-1 state
[ 0.325799] Monitor-Mwait will be used to enter C-2 state
[ 0.325801] Monitor-Mwait will be used to enter C-3 state
[ 0.326153] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.326167] ACPI: button: Sleep Button [SLPB]
[ 0.326180] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.326188] ACPI: button: Power Button [PWRB]
[ 0.326199] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.327595] ACPI: button: Power Button [PWRF]
[ 0.329988] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.329989] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.330115] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.330489] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.330858] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.331669] Non-volatile memory driver v1.3
[ 0.331670] Linux agpgart interface v0.103
[ 0.372801] ahci 0000:00:17.0: version 3.0
[ 0.372983] ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 0.372984] ahci 0000:00:17.0: 3/3 ports implemented (port mask 0xd)
[ 0.372985] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds
[ 0.377055] scsi host0: ahci
[ 0.377307] scsi host1: ahci
[ 0.377526] scsi host2: ahci
[ 0.377668] scsi host3: ahci
[ 0.377686] ata1: SATA max UDMA/133 abar m2048@0x80902000 port 0x80902100 irq 123 lpm-pol 3
[ 0.377687] ata2: DUMMY
[ 0.377689] ata3: SATA max UDMA/133 abar m2048@0x80902000 port 0x80902200 irq 123 lpm-pol 3
[ 0.377690] ata4: SATA max UDMA/133 abar m2048@0x80902000 port 0x80902280 irq 123 lpm-pol 3
[ 0.377857] ACPI: bus type drm_connector registered
[ 0.378926] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.378929] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.380022] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[ 0.380302] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.380305] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.380306] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
[ 0.380335] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
[ 0.380336] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.380337] usb usb1: Product: xHCI Host Controller
[ 0.380338] usb usb1: Manufacturer: Linux 6.13.2-zen1-1-zen xhci-hcd
[ 0.380339] usb usb1: SerialNumber: 0000:00:14.0
[ 0.380342] ------------[ cut here ]------------
[ 0.380343] TLB flush not stride 200000 aligned. Start 7fffc0000000, end 7fffffe01000
[ 0.380346] WARNING: CPU: 10 PID: 136 at arch/x86/mm/tlb.c:1342 flush_tlb_mm_range+0x577/0x600
[ 0.380351] Modules linked in:
[ 0.380354] CPU: 10 UID: 0 PID: 136 Comm: modprobe Not tainted 6.13.2-zen1-1-zen #1 393e73ceb395152ed6f22a9b3e01961614175574
[ 0.380356] Hardware name: Micro Computer (HK) Tech Limited TH60/TH60, BIOS 0.05 11/08/2022
[ 0.380357] RIP: 0010:flush_tlb_mm_range+0x577/0x600
[ 0.380359] Code: 5f e9 8d d1 3f 00 e8 68 62 f5 ff e9 e9 fc ff ff 48 8b 0c 24 4c 89 e2 48 c7 c7 28 e3 c6 a9 c6 05 41 2a 31 02 01 e8 19 e9 01 00 <0f> 0b e9 36 fb ff ff fa 0f 1f 44 00 00 48 89 df e8 a4 f4 ff ff fb
[ 0.380360] RSP: 0000:ffffa790006bfa38 EFLAGS: 00010286
[ 0.380361] RAX: 0000000000000000 RBX: ffff98762fb35d40 RCX: 00000000ffffefff
[ 0.380362] RDX: 0000000000000000 RSI: 00000000ffffffea RDI: 00000000ffffefff
[ 0.380363] RBP: ffff9872c5e96300 R08: ffffffffaa4b5888 R09: 00000000ffffefff
[ 0.380364] R10: 0000000000000003 R11: 0000000000000002 R12: 00007fffc0000000
[ 0.380364] R13: 000000000000000a R14: 0000000000000015 R15: ffff98762fb00000
[ 0.380365] FS: 0000000000000000(0000) GS:ffff98762fb00000(0000) knlGS:0000000000000000
[ 0.380366] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.380367] CR2: 0000000000000000 CR3: 0000000101884002 CR4: 0000000000f70ef0
[ 0.380368] PKRU: 55555554
[ 0.380368] Call Trace:
[ 0.380369] <TASK>
[ 0.380370] ? flush_tlb_mm_range+0x577/0x600
[ 0.380372] ? __warn.cold+0x93/0xed
[ 0.380374] ? flush_tlb_mm_range+0x577/0x600
[ 0.380375] ? report_bug+0xe7/0x210
[ 0.380377] ? handle_bug+0x58/0x90
[ 0.380379] ? exc_invalid_op+0x19/0xc0
[ 0.380380] ? asm_exc_invalid_op+0x1a/0x20
[ 0.380382] ? flush_tlb_mm_range+0x577/0x600
[ 0.380383] ? flush_tlb_mm_range+0x577/0x600
[ 0.380384] tlb_flush_mmu+0x125/0x1a0
[ 0.380386] tlb_finish_mmu+0x41/0x80
[ 0.380388] relocate_vma_down+0x183/0x200
[ 0.380390] setup_arg_pages+0x201/0x390
[ 0.380393] load_elf_binary+0x3a5/0x17b0
[ 0.380395] ? __kernel_read+0x19a/0x300
[ 0.380397] ? load_misc_binary+0x265/0x380
[ 0.380398] bprm_execve+0x241/0x630
[ 0.380400] kernel_execve+0x17d/0x1e0
[ 0.380401] call_usermodehelper_exec_async+0xd0/0x190
[ 0.380403] ? __pfx_call_usermodehelper_exec_async+0x10/0x10
[ 0.380405] ret_from_fork+0x31/0x50
[ 0.380406] ? __pfx_call_usermodehelper_exec_async+0x10/0x10
[ 0.380407] ret_from_fork_asm+0x1a/0x30
[ 0.380410] </TASK>
[ 0.380410] ---[ end trace 0000000000000000 ]---
[ 0.380440] hub 1-0:1.0: USB hub found
[ 0.380463] hub 1-0:1.0: 16 ports detected
[ 0.381042] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.381045] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS07._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.381050] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.381052] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS07._UPC due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.381059] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.381061] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS07._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.381067] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.381069] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS08._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.381073] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.381075] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS08._UPC due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.381080] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.381082] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS08._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.381088] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.381090] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS09._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.381094] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.381096] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS09._UPC due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.381102] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.381104] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS09._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.381110] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.381112] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS10._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.381116] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.381117] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS10._UPC due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.381123] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.UBTC.RUCC], AE_NOT_FOUND (20240827/psargs-332)
[ 0.381125] ACPI Error: Aborting method \_SB.PC00.XHCI.RHUB.HS10._PLD due to previous error (AE_NOT_FOUND) (20240827/psparse-529)
[ 0.381824] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
[ 0.381825] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.381826] usb usb2: Product: xHCI Host Controller
[ 0.381827] usb usb2: Manufacturer: Linux 6.13.2-zen1-1-zen xhci-hcd
[ 0.381828] usb usb2: SerialNumber: 0000:00:14.0
[ 0.381881] hub 2-0:1.0: USB hub found
[ 0.381898] hub 2-0:1.0: 8 ports detected
[ 0.382195] usb: port power management may be unreliable
[ 0.382610] usbcore: registered new interface driver usbserial_generic
[ 0.382613] usbserial: USB Serial support registered for generic
[ 0.382666] rtc_cmos rtc_cmos: RTC can wake from S4
[ 0.383554] rtc_cmos rtc_cmos: registered as rtc0
[ 0.383741] rtc_cmos rtc_cmos: setting system clock to 2025-02-20T00:07:34 UTC (1740010054)
[ 0.383768] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[ 0.385591] intel_pstate: Intel P-state driver initializing
[ 0.386208] intel_pstate: HWP enabled
[ 0.386492] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
[ 0.386494] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[ 0.387609] fbcon: Deferring console take-over
[ 0.387611] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.387643] hid: raw HID events driver (C) Jiri Kosina
[ 0.387683] drop_monitor: Initializing network drop monitor service
[ 0.387750] NET: Registered PF_INET6 protocol family
[ 0.390672] Segment Routing with IPv6
[ 0.390674] RPL Segment Routing with IPv6
[ 0.390678] In-situ OAM (IOAM) with IPv6
[ 0.390693] NET: Registered PF_PACKET protocol family
[ 0.391451] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.391555] microcode: Current revision: 0x0000003c
[ 0.391675] resctrl: L2 allocation detected
[ 0.391689] IPI shorthand broadcast: enabled
[ 0.392715] sched_clock: Marking stable (388000995, 4575384)->(400812913, -8236534)
[ 0.392804] registered taskstats version 1
[ 0.393020] Loading compiled-in X.509 certificates
[ 0.395801] Loaded X.509 cert 'Build time autogenerated kernel key: 8aa57182dc49d2dadaa3271663beca9f442cc943'
[ 0.396741] Demotion targets for Node 0: null
[ 0.396845] Key type .fscrypt registered
[ 0.396846] Key type fscrypt-provisioning registered
[ 0.397663] PM: Magic number: 13:538:102
[ 0.399726] RAS: Correctable Errors collector initialized.
[ 0.406714] clk: Disabling unused clocks
[ 0.406716] PM: genpd: Disabling unused power domains
[ 0.616711] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 0.687117] ata1: SATA link down (SStatus 4 SControl 300)
[ 0.687284] ata4: SATA link down (SStatus 4 SControl 300)
[ 0.687366] ata3: SATA link down (SStatus 4 SControl 300)
[ 0.707077] Freeing unused decrypted memory: 2028K
[ 0.707718] Freeing unused kernel image (initmem) memory: 4432K
[ 0.707736] Write protecting the kernel read-only data: 34816k
[ 0.708054] Freeing unused kernel image (rodata/data gap) memory: 124K
[ 0.714465] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.714468] rodata_test: all tests were successful
[ 0.714471] Run /init as init process
[ 0.714471] with arguments:
[ 0.714472] /init
[ 0.714473] with environment:
[ 0.714473] HOME=/
[ 0.714474] TERM=linux
[ 0.714474] BOOT_IMAGE=/boot/vmlinuz-linux-zen
[ 0.742744] usb 1-2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
[ 0.742747] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.742748] usb 1-2: Product: USB Receiver
[ 0.742749] usb 1-2: Manufacturer: Logitech
[ 0.750239] usbcore: registered new interface driver usbhid
[ 0.750242] usbhid: USB HID core driver
[ 0.752440] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C534.0001/input/input3
[ 0.809993] nvme nvme0: pci function 0000:03:00.0
[ 0.854784] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
[ 0.854926] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input4
[ 0.855023] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input5
[ 0.855617] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 0.862851] nvme nvme0: allocated 128 MiB host memory buffer (32 segments).
[ 0.866621] nvme nvme0: 8/0/0 default/read/poll queues
[ 0.871813] nvme0n1: p1 p2 p3 p4 p5 p6
[ 0.905756] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/input/input6
[ 0.906046] hid-generic 0003:046D:C534.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
[ 1.156530] i915 0000:00:02.0: [drm] Found tigerlake (device ID 9a68) display version 12.00 stepping D0
[ 1.168811] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0
[ 1.189941] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.189993] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 1.190481] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.191206] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
[ 1.193667] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
[ 1.217567] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1
[ 1.219072] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.219816] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 1.272840] logitech-djreceiver 0003:046D:C534.0002: hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1
[ 1.286394] fbcon: i915drmfb (fb0) is primary device
[ 1.286396] fbcon: Deferring console take-over
[ 1.286397] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 1.324470] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1
[ 1.324786] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input10
[ 1.326457] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2
[ 1.438700] hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-2/input1:1
[ 1.438870] input: Logitech Wireless Mouse PID:4058 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/0003:046D:4058.0004/input/input15
[ 1.438908] input: Logitech Wireless Mouse PID:4058 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/0003:046D:4058.0004/input/input16
[ 1.438930] hid-generic 0003:046D:4058.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4058] on usb-0000:00:14.0-2/input1:2
[ 1.541344] usb 1-4: New USB device found, idVendor=046d, idProduct=08e5, bcdDevice= 0.21
[ 1.541349] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[ 1.541351] usb 1-4: Product: HD Pro Webcam C920
[ 1.541353] usb 1-4: SerialNumber: 3E990F4F
[ 1.654679] usb 1-6: new full-speed USB device number 4 using xhci_hcd
[ 1.801762] usb 1-6: New USB device found, idVendor=3151, idProduct=3000, bcdDevice= 0.02
[ 1.801767] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.801769] usb 1-6: Product: Wireless Device
[ 1.801771] usb 1-6: Manufacturer: YICHIP
[ 1.810553] input: YICHIP Wireless Device as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:3151:3000.0005/input/input20
[ 1.900980] hid-generic 0003:3151:3000.0005: input,hidraw4: USB HID v2.00 Keyboard [YICHIP Wireless Device] on usb-0000:00:14.0-6/input0
[ 1.920485] input: YICHIP Wireless Device Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:3151:3000.0006/input/input21
[ 1.920607] input: YICHIP Wireless Device System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:3151:3000.0006/input/input22
[ 1.971922] input: YICHIP Wireless Device Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:3151:3000.0006/input/input23
[ 1.972027] hid-generic 0003:3151:3000.0006: input,hiddev97,hidraw5: USB HID v2.00 Mouse [YICHIP Wireless Device] on usb-0000:00:14.0-6/input1
[ 2.083676] usb 1-14: new full-speed USB device number 5 using xhci_hcd
[ 2.208997] usb 1-14: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00
[ 2.209002] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.282684] input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input26
[ 2.314752] logitech-hidpp-device 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-2/input1:1
[ 2.352646] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0002/0003:046D:4058.0004/input/input27
[ 2.352707] logitech-hidpp-device 0003:046D:4058.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-2/input1:2
[ 3.702611] logitech-hidpp-device 0003:046D:4058.0004: HID++ 4.5 device connected.
[ 4.692529] fbcon: Taking over console
[ 4.709112] Console: switching to colour frame buffer device 240x67
[ 4.785610] EXT4-fs (nvme0n1p6): mounted filesystem 4b253574-fa0d-4251-bc28-9c45d6d514ec r/w with ordered data mode. Quota mode: none.
[ 4.871091] systemd[1]: systemd 257.3-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[ 4.871095] systemd[1]: Detected architecture x86-64.
[ 4.873145] systemd[1]: Hostname set to <dingus>.
[ 4.961198] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[ 5.152126] systemd[1]: Queued start job for default target Graphical Interface.
[ 5.180536] systemd[1]: Created slice Slice /system/dirmngr.
[ 5.180772] systemd[1]: Created slice Slice /system/getty.
[ 5.180997] systemd[1]: Created slice Slice /system/gpg-agent.
[ 5.181213] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ 5.181417] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ 5.181618] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ 5.181813] systemd[1]: Created slice Slice /system/keyboxd.
[ 5.182009] systemd[1]: Created slice Slice /system/modprobe.
[ 5.182168] systemd[1]: Created slice User and Session Slice.
[ 5.182198] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.182290] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.182301] systemd[1]: Expecting device /dev/nvme0n1p4...
[ 5.182304] systemd[1]: Expecting device /dev/nvme0n1p5...
[ 5.182314] systemd[1]: Reached target Login Prompts.
[ 5.182322] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 5.182334] systemd[1]: Reached target Preparation for Network.
[ 5.182341] systemd[1]: Reached target Remote File Systems.
[ 5.182346] systemd[1]: Reached target Slice Units.
[ 5.182362] systemd[1]: Reached target Local Verity Protected Volumes.
[ 5.182414] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.184633] systemd[1]: Listening on Process Core Dump Socket.
[ 5.185063] systemd[1]: Listening on Credential Encryption/Decryption.
[ 5.185111] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.185146] systemd[1]: Listening on Journal Sockets.
[ 5.185169] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 5.185178] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 5.185208] systemd[1]: Listening on udev Control Socket.
[ 5.185234] systemd[1]: Listening on udev Kernel Socket.
[ 5.185260] systemd[1]: Listening on User Database Manager Socket.
[ 5.185884] systemd[1]: Mounting Huge Pages File System...
[ 5.186308] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.186679] systemd[1]: Mounting Kernel Debug File System...
[ 5.187038] systemd[1]: Mounting Kernel Trace File System...
[ 5.187505] systemd[1]: Starting Create List of Static Device Nodes...
[ 5.187919] systemd[1]: Starting Load Kernel Module configfs...
[ 5.188482] systemd[1]: Starting Load Kernel Module dm_mod...
[ 5.189049] systemd[1]: Starting Load Kernel Module drm...
[ 5.189446] systemd[1]: Starting Load Kernel Module fuse...
[ 5.189984] systemd[1]: Starting Load Kernel Module loop...
[ 5.190043] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 5.190070] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 5.191089] systemd[1]: Starting Journal Service...
[ 5.192082] systemd[1]: Starting Load Kernel Modules...
[ 5.192096] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 5.192689] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.192722] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 5.193298] systemd[1]: Starting Load udev Rules from Credentials...
[ 5.193870] systemd[1]: Starting Coldplug All udev Devices...
[ 5.194446] systemd[1]: Starting Virtual Console Setup...
[ 5.195740] systemd[1]: Mounted Huge Pages File System.
[ 5.195795] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.195832] systemd[1]: Mounted Kernel Debug File System.
[ 5.195883] systemd[1]: Mounted Kernel Trace File System.
[ 5.196042] systemd[1]: Finished Create List of Static Device Nodes.
[ 5.196419] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 5.196500] systemd[1]: Finished Load Kernel Module configfs.
[ 5.196620] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 5.196692] systemd[1]: Finished Load Kernel Module drm.
[ 5.196822] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 5.196889] systemd[1]: Finished Load Kernel Module fuse.
[ 5.197368] systemd[1]: Mounting FUSE Control File System...
[ 5.197798] systemd[1]: Mounting Kernel Configuration File System...
[ 5.197870] loop: module loaded
[ 5.198431] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[ 5.198879] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 5.199007] systemd[1]: Finished Load Kernel Module loop.
[ 5.200104] device-mapper: uevent: version 1.0.3
[ 5.200155] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 5.200483] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 5.200584] systemd[1]: Finished Load Kernel Module dm_mod.
[ 5.200698] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[ 5.201369] systemd[1]: Finished Load udev Rules from Credentials.
[ 5.201649] systemd[1]: Mounted FUSE Control File System.
[ 5.201699] systemd[1]: Mounted Kernel Configuration File System.
[ 5.204563] systemd-journald[342]: Collecting audit messages is disabled.
[ 5.209213] i2c_dev: i2c /dev entries driver
[ 5.211856] EXT4-fs (nvme0n1p6): re-mounted 4b253574-fa0d-4251-bc28-9c45d6d514ec r/w. Quota mode: none.
[ 5.212488] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 5.213729] mc: Linux media interface: v0.10
[ 5.214095] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[ 5.214683] systemd[1]: Starting Load/Save OS Random Seed...
[ 5.214696] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 5.215510] systemd[1]: Starting User Database Manager...
[ 5.215808] systemd[1]: Finished Virtual Console Setup.
[ 5.222880] videodev: Linux video capture interface: v2.00
[ 5.229715] systemd[1]: Started Journal Service.
[ 5.240428] systemd-journald[342]: Received client request to flush runtime journal.
[ 5.379190] intel_pmc_core INT33A1:00: initialized
[ 5.381586] pps_core: LinuxPPS API ver. 1 registered
[ 5.381588] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 5.397986] input: PC Speaker as /devices/platform/pcspkr/input/input28
[ 5.398655] PTP clock support registered
[ 5.400487] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 5.400914] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 5.400947] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 5.403780] i2c i2c-11: Successfully instantiated SPD at 0x50
[ 5.404404] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcdfff], which spans more than pnp 00:03 [mem 0xfedc0000-0xfedc7fff]
[ 5.404408] caller uncore_get_box_mmio_addr+0xe9/0x150 [intel_uncore] mapping multiple BARs
[ 5.404458] i2c i2c-11: Successfully instantiated SPD at 0x52
[ 5.407816] Intel(R) 2.5G Ethernet Linux Driver
[ 5.407818] Copyright(c) 2018 Intel Corporation.
[ 5.407986] igc 0000:01:00.0: PTM enabled, 4ns granularity
[ 5.409588] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[ 5.409911] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 5.421678] iTCO_vendor_support: vendor-support=0
[ 5.422715] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 5.422717] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.422718] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.422719] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 5.423229] ee1004 11-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 5.424940] ee1004 11-0052: 512 byte EE1004-compliant SPD EEPROM, read-only
[ 5.425183] Creating 1 MTD partitions on "0000:00:1f.5":
[ 5.425186] 0x000000000000-0x000002000000 : "BIOS"
[ 5.425490] intel_rapl_common: Found RAPL domain package
[ 5.425492] intel_rapl_common: Found RAPL domain core
[ 5.425493] intel_rapl_common: Found RAPL domain uncore
[ 5.425688] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
[ 5.426034] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 5.426733] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[ 5.428498] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
[ 5.436116] cryptd: max_cpu_qlen set to 1000
[ 5.436467] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[ 5.436548] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.442633] intel-lpss 0000:00:15.2: enabling device (0004 -> 0006)
[ 5.442906] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 5.454484] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.454885] igc 0000:01:00.0 (unnamed net_device) (uninitialized): PHC added
[ 5.456517] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.456618] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 5.457084] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 5.457087] cfg80211: failed to load regulatory.db
[ 5.457360] AES CTR mode by8 optimization enabled
[ 5.457730] intel-lpss 0000:00:15.3: enabling device (0004 -> 0006)
[ 5.457923] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 5.458944] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 5.459134] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 5.459845] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 5.469399] Intel(R) Wireless WiFi driver for Linux
[ 5.469441] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 5.470564] iwlwifi 0000:02:00.0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000
[ 5.470570] iwlwifi 0000:02:00.0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000
[ 5.470572] iwlwifi 0000:02:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz
[ 5.473608] intel-lpss 0000:00:19.0: enabling device (0004 -> 0006)
[ 5.473966] idma64 idma64.4: Found Intel integrated DMA 64-bit
[ 5.474921] iwlwifi 0000:02:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.42
[ 5.475117] iwlwifi 0000:02:00.0: loaded firmware version 89.1a492d28.0 ty-a0-gf-a0-89.ucode op_mode iwlmvm
[ 5.479788] igc 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
[ 5.479792] igc 0000:01:00.0 eth0: MAC: 58:47:ca:70:fa:ca
[ 5.482156] igc 0000:01:00.0 enp1s0: renamed from eth0
[ 5.483302] Adding 4194300k swap on /dev/nvme0n1p5. Priority:-2 extents:1 across:4194300k SS
[ 5.489753] intel-lpss 0000:00:19.1: enabling device (0004 -> 0006)
[ 5.489975] idma64 idma64.5: Found Intel integrated DMA 64-bit
[ 5.491507] snd_hda_codec_conexant hdaudioC1D0: CX20632: BIOS auto-probing.
[ 5.492256] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20632: line_outs=2 (0x19/0x1c/0x0/0x0/0x0) type:hp
[ 5.492258] snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.492260] snd_hda_codec_conexant hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.492261] snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
[ 5.492261] snd_hda_codec_conexant hdaudioC1D0: inputs:
[ 5.492262] snd_hda_codec_conexant hdaudioC1D0: Rear Mic=0x1b
[ 5.492263] snd_hda_codec_conexant hdaudioC1D0: Front Mic=0x1a
[ 5.505603] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[ 5.506009] idma64 idma64.6: Found Intel integrated DMA 64-bit
[ 5.517589] intel-lpss 0000:00:1e.3: enabling device (0004 -> 0006)
[ 5.518048] idma64 idma64.7: Found Intel integrated DMA 64-bit
[ 5.546583] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input29
[ 5.546620] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input30
[ 5.546641] input: HDA Intel PCH Front Headphone Front as /devices/pci0000:00/0000:00:1f.3/sound/card1/input31
[ 5.546660] input: HDA Intel PCH Headphone Surround as /devices/pci0000:00/0000:00:1f.3/sound/card1/input32
[ 5.546679] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input33
[ 5.546697] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input34
[ 5.546714] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input35
[ 5.546730] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input36
[ 5.557935] dw-apb-uart.6: ttyS4 at MMIO 0x4017006000 (irq = 16, base_baud = 6250000) is a 16550A
[ 5.575627] intel_tcc_cooling: TCC Offset locked
[ 5.729527] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[ 5.729547] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[ 5.729559] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90
[ 5.729571] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[ 5.730634] iwlwifi 0000:02:00.0: loaded PNVM version 581d4936
[ 5.745774] iwlwifi 0000:02:00.0: Detected RF GF, rfid=0x10d000
[ 5.815058] iwlwifi 0000:02:00.0: base HW address: 74:3a:f4:d3:8f:1a
[ 5.843159] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 6.227373] FAT-fs (nvme0n1p4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6.460156] mousedev: PS/2 mouse device common for all mice
[ 6.477306] Bluetooth: Core ver 2.22
[ 6.477320] NET: Registered PF_BLUETOOTH protocol family
[ 6.477321] Bluetooth: HCI device and connection manager initialized
[ 6.477324] Bluetooth: HCI socket layer initialized
[ 6.477325] Bluetooth: L2CAP socket layer initialized
[ 6.477327] Bluetooth: SCO socket layer initialized
[ 6.492902] usb 1-4: Found UVC 1.00 device HD Pro Webcam C920 (046d:08e5)
[ 6.494563] usbcore: registered new interface driver uvcvideo
[ 6.606251] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[ 6.606268] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[ 6.606281] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90
[ 6.606295] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[ 6.646144] usbcore: registered new interface driver btusb
[ 6.648511] Bluetooth: hci0: Device revision is 0
[ 6.648517] Bluetooth: hci0: Secure boot is enabled
[ 6.648519] Bluetooth: hci0: OTP lock is enabled
[ 6.648520] Bluetooth: hci0: API lock is enabled
[ 6.648521] Bluetooth: hci0: Debug lock is disabled
[ 6.648522] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 6.648524] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38
[ 6.648623] Bluetooth: hci0: DSM reset method type: 0x00
[ 6.655606] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi
[ 6.655632] Bluetooth: hci0: Boot Address: 0x100800
[ 6.655634] Bluetooth: hci0: Firmware Version: 200-48.24
[ 6.693385] iwlwifi 0000:02:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1
[ 6.699964] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.699966] Bluetooth: BNEP filters: protocol multicast
[ 6.699968] Bluetooth: BNEP socket layer initialized
[ 6.750992] usbcore: registered new interface driver snd-usb-audio
[ 6.881950] iwlwifi 0000:02:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20
[ 6.881962] iwlwifi 0000:02:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[ 6.881975] iwlwifi 0000:02:00.0: WFPM_AUTH_KEY_0: 0x90
[ 6.881987] iwlwifi 0000:02:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0
[ 7.177608] tun: Universal TUN/TAP device driver, 1.6
[ 7.966248] Bluetooth: hci0: Waiting for firmware download to complete
[ 7.966447] Bluetooth: hci0: Firmware loaded in 1280113 usecs
[ 7.966473] Bluetooth: hci0: Waiting for device to boot
[ 7.991494] Bluetooth: hci0: Device booted in 24445 usecs
[ 7.993827] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0041-0041.ddc
[ 7.995538] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 7.998506] Bluetooth: hci0: Firmware timestamp 2024.48 buildtype 1 build 81864
[ 7.998518] Bluetooth: hci0: Firmware SHA1: 0xc115e35a
[ 8.002544] Bluetooth: hci0: Fseq status: Success (0x00)
[ 8.002554] Bluetooth: hci0: Fseq executed: 00.00.02.41
[ 8.002560] Bluetooth: hci0: Fseq BT Top: 00.00.02.41
[ 8.078575] Bluetooth: MGMT ver 1.23
[ 8.081969] NET: Registered PF_ALG protocol family
[ 10.211158] wlp2s0: authenticate with 70:4f:b8:8c:fa:61 (local address=74:3a:f4:d3:8f:1a)
[ 10.212125] wlp2s0: send auth to 70:4f:b8:8c:fa:61 (try 1/3)
[ 10.245198] wlp2s0: authenticated
[ 10.245606] wlp2s0: associate with 70:4f:b8:8c:fa:61 (try 1/3)
[ 10.260646] wlp2s0: RX AssocResp from 70:4f:b8:8c:fa:61 (capab=0x431 status=0 aid=4)
[ 10.268584] wlp2s0: associated
[ 13.909335] Initializing XFRM netlink socket
[ 13.923560] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 76.543144] nvme nvme0: using unchecked data buffer
[ 77.137801] usb 1-4: reset high-speed USB device number 3 using xhci_hcd
[ 78.169273] Bluetooth: RFCOMM TTY layer initialized
[ 78.169279] Bluetooth: RFCOMM socket layer initialized
[ 78.169280] Bluetooth: RFCOMM ver 1.11
[ 78.824887] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 102.152612] input: Nothing Ear (a) (AVRCP) as /devices/virtual/input/input37
[ 317.600660] usb 1-5: new high-speed USB device number 6 using xhci_hcd
[ 317.727889] usb 1-5: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice=14.05
[ 317.727894] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 317.727899] usb 1-5: Product: iPhone
[ 317.727901] usb 1-5: Manufacturer: Apple Inc.
[ 317.727902] usb 1-5: SerialNumber: 00008110001A70A422F2801E
[ 318.337463] usbcore: registered new device driver apple-mfi-fastcharge
[ 318.360683] ipheth 1-5:4.2: ipheth_enable_ncm: usb_control_msg: 0
[ 318.360824] ipheth 1-5:4.2: Apple iPhone USB Ethernet device attached
[ 318.360848] usbcore: registered new interface driver ipheth
[ 318.367884] usbcore: registered new interface driver cdc_ether
[ 318.370394] usbcore: registered new interface driver cdc_ncm
[ 318.371585] ipheth 1-5:4.2 enp0s20f0u5c4i2: renamed from eth0
[ 353.269365] apple-mfi-fastcharge 1-5: USB disconnect, device number 6
[ 353.286663] ipheth 1-5:4.2: Apple iPhone USB Ethernet now disconnected
[ 362.699640] usb 1-6: USB disconnect, device number 4
[ 368.151600] usb 1-5: new full-speed USB device number 7 using xhci_hcd
[ 368.301828] usb 1-5: New USB device found, idVendor=3151, idProduct=3000, bcdDevice= 0.02
[ 368.301837] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 368.301839] usb 1-5: Product: Wireless Device
[ 368.301842] usb 1-5: Manufacturer: YICHIP
[ 368.310804] input: YICHIP Wireless Device as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:3151:3000.0007/input/input38
[ 368.418922] hid-generic 0003:3151:3000.0007: input,hidraw4: USB HID v2.00 Keyboard [YICHIP Wireless Device] on usb-0000:00:14.0-5/input0
[ 368.436971] input: YICHIP Wireless Device Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:3151:3000.0008/input/input39
[ 368.437152] input: YICHIP Wireless Device System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:3151:3000.0008/input/input40
[ 368.487908] input: YICHIP Wireless Device Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:3151:3000.0008/input/input41
[ 368.488084] hid-generic 0003:3151:3000.0008: input,hiddev97,hidraw5: USB HID v2.00 Mouse [YICHIP Wireless Device] on usb-0000:00:14.0-5/input1
[ 383.650713] usb 1-6: new high-speed USB device number 8 using xhci_hcd
[ 383.876165] usb 1-6: New USB device found, idVendor=05ac, idProduct=12a8, bcdDevice=14.05
[ 383.876173] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 383.876175] usb 1-6: Product: iPhone
[ 383.876177] usb 1-6: Manufacturer: Apple Inc.
[ 383.876179] usb 1-6: SerialNumber: 00008110001A70A422F2801E
[ 383.977467] ipheth 1-6:4.2: ipheth_enable_ncm: usb_control_msg: 0
[ 383.977642] ipheth 1-6:4.2: Apple iPhone USB Ethernet device attached
[ 383.979898] ipheth 1-6:4.2 enp0s20f0u6c4i2: renamed from eth0

supermx811 · 2025-02-20 00:19:49

i use an iphone 13 if that matters

supermx811 · 2025-02-20 03:07:15

putting my user into the video group with usermod removes it from sudoers

impossibleveins23 · 2025-02-20 11:27:21

Please use styling for logs and such.

So you were not in the video group (and therefore don't have access to /dev/video*.
* Regarding adding a user to a group.
* How to review your webcams.
* Do you have v4l2loopback-dc-dkms module installed and loaded (dkms status)?

supermx811 · 2025-02-21 22:37:52

v4l2-ctl --list-devices:

HD Pro Webcam C920 (usb-0000:00:14.0-4):
        /dev/video0
        /dev/video1
        /dev/media0

dkms status:

v4l2loopback-dc/2.1.3, 6.13.3-arch1-1, x86_64: installed

impossibleveins23 · 2025-02-22 09:48:40

Is new device is created when you connect the phone?

Execute and pass output here:
* groups
* udevadm monitor and connect the phone.

supermx811 · 2025-02-22 21:13:55

groups:

sudo usermod -a -G video max

no output

udevadm monitor:

KERNEL[5733.576343] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5 (usb)
KERNEL[5733.580208] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0 (usb)
KERNEL[5733.580234] bind     /devices/pci0000:00/0000:00:14.0/usb1/1-5 (usb)
KERNEL[5733.580271] remove   /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0 (usb)
UDEV  [5734.143015] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5 (usb)
KERNEL[5734.148433] add      /bus/usb/drivers/apple-mfi-fastcharge (drivers)
KERNEL[5734.148471] unbind   /devices/pci0000:00/0000:00:14.0/usb1/1-5 (usb)
UDEV  [5734.149220] add      /bus/usb/drivers/apple-mfi-fastcharge (drivers)
KERNEL[5734.152977] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0 (usb)
KERNEL[5734.152998] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/power_supply/apple_mfi_fastcharge/wakeup44 (wakeup)
KERNEL[5734.153035] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/power_supply/apple_mfi_fastcharge/hwmon5 (hwmon)
KERNEL[5734.153049] bind     /devices/pci0000:00/0000:00:14.0/usb1/1-5 (usb)
KERNEL[5734.153056] add      /module/apple_mfi_fastcharge (module)
UDEV  [5734.153382] add      /module/apple_mfi_fastcharge (module)
UDEV  [5734.153429] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0 (usb)
UDEV  [5734.160646] bind     /devices/pci0000:00/0000:00:14.0/usb1/1-5 (usb)
UDEV  [5734.161235] remove   /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0 (usb)
UDEV  [5734.162209] unbind   /devices/pci0000:00/0000:00:14.0/usb1/1-5 (usb)
UDEV  [5734.162867] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0 (usb)
UDEV  [5734.162886] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/power_supply/apple_mfi_fastcharge/wakeup44 (wakeup)
UDEV  [5734.163491] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/power_supply/apple_mfi_fastcharge/hwmon5 (hwmon)
KERNEL[5734.164129] change   /devices/pci0000:00/0000:00:14.0/usb1/1-5/power_supply/apple_mfi_fastcharge (power_supply)
KERNEL[5734.164693] remove   /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0 (usb)
UDEV  [5734.166460] bind     /devices/pci0000:00/0000:00:14.0/usb1/1-5 (usb)
UDEV  [5734.166936] remove   /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0 (usb)
KERNEL[5734.168196] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.0 (usb)
KERNEL[5734.168455] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.1 (usb)
KERNEL[5734.168796] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.2 (usb)
UDEV  [5734.169569] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.1 (usb)
UDEV  [5734.169598] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.0 (usb)
KERNEL[5734.175174] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.2/net/eth0 (net)
KERNEL[5734.175198] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.2/net/eth0/queues/rx-0 (queues)
KERNEL[5734.175208] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.2/net/eth0/queues/tx-0 (queues)
KERNEL[5734.175285] bind     /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.2 (usb)
KERNEL[5734.175404] add      /bus/usb/drivers/ipheth (drivers)
KERNEL[5734.175415] add      /module/ipheth (module)
UDEV  [5734.175812] add      /module/ipheth (module)
UDEV  [5734.175830] add      /bus/usb/drivers/ipheth (drivers)
KERNEL[5734.178183] add      /module/mii (module)
UDEV  [5734.178468] add      /module/mii (module)
KERNEL[5734.181030] add      /module/usbnet (module)
UDEV  [5734.181378] add      /module/usbnet (module)
KERNEL[5734.183408] add      /bus/usb/drivers/cdc_ether (drivers)
KERNEL[5734.183439] add      /module/cdc_ether (module)
UDEV  [5734.183889] add      /bus/usb/drivers/cdc_ether (drivers)
UDEV  [5734.183904] add      /module/cdc_ether (module)
KERNEL[5734.186595] add      /bus/usb/drivers/cdc_ncm (drivers)
KERNEL[5734.186618] add      /module/cdc_ncm (module)
UDEV  [5734.186736] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.2 (usb)
UDEV  [5734.186904] add      /module/cdc_ncm (module)
UDEV  [5734.187008] add      /bus/usb/drivers/cdc_ncm (drivers)
KERNEL[5734.188063] move     /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.2/net/enp0s20f0u5c4i2 (net)
UDEV  [5734.191745] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.2/net/enp0s20f0u5c4i2 (net)
UDEV  [5734.192345] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.2/net/eth0/queues/tx-0 (queues)
UDEV  [5734.192363] add      /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.2/net/eth0/queues/rx-0 (queues)
UDEV  [5734.193126] bind     /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.2 (usb)
UDEV  [5734.194982] move     /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:4.2/net/enp0s20f0u5c4i2 (net)
UDEV  [5735.753794] change   /devices/pci0000:00/0000:00:14.0/usb1/1-5/power_supply/apple_mfi_fastcharge (power_supply)

impossibleveins23 · 2025-02-27 17:49:09

* Is the module loaded (lsmod | grep v4l)?
* According to this, device should be at: /sys/devices/virtual/video4linux.

If you see devices in the dir above, check their permissions and see if you can direct the Droidcam client to this device.

Arch Linux

#1 2025-02-19 04:27:48

droidcam will not function

#2 2025-02-19 18:16:50

Re: droidcam will not function

#3 2025-02-20 00:19:14

Re: droidcam will not function

#4 2025-02-20 00:19:49

Re: droidcam will not function

#5 2025-02-20 03:07:15

Re: droidcam will not function

#6 2025-02-20 11:27:21

Re: droidcam will not function

#7 2025-02-21 22:37:52

Re: droidcam will not function

#8 2025-02-22 09:48:40

Re: droidcam will not function

#9 2025-02-22 21:13:55

Re: droidcam will not function

#10 2025-02-27 17:49:09

Re: droidcam will not function

Board footer