You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2025-03-17 20:37:52
- LightningStab
- Member
- Registered: 2025-02-08
- Posts: 13
Pipewire not detecting speaker
hi, I've been using pipewire and it works fine for in detecting my monitors and headphones but it doesn't detect my speaker, I've plugged them in at different ports but it cant seem to tell if its plugged in. Ive been using pavucontrol.
Offline
#2 2025-03-18 15:29:34
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 24,301
Re: Pipewire not detecting speaker
not much actable info here, what outputs do you get from
aplay -l
amixer -c0 #or whatever index your speakers are on in aplay -l
pactl list cards
pactl list sinkspost that in [code][/code] tags
Offline
#3 2025-03-18 21:09:25
- fywrite
- Member
- Registered: 2025-03-17
- Posts: 2
Re: Pipewire not detecting speaker
Check
$ wpctl statuswhich sinks are with asteriks (default selected).
$ wpctl inspect IDbe sure its the right output for the plugged port. If not
$ wpctl set-default ID $ pactl listfind your card and especially check the active profile and profiles to make sure which output or input they are support.
$ wpctl set-profile ID INDEXto select profile for your card. after select you can observe
$ wpctl status sinks are updated and inspect the ids.
to make it permanent
$ cat .config/wireplumber/wireplumber.conf.d/90-alsa.conf
monitor.alsa.rules = [
{
matches = [
{
# This matches the value of the 'device.name' property of the device.
device.name = "alsa_card.pci-0000_00_1b.0"
}
]
actions = {
update-props = {
# Apply all the desired device settings here.
device.profile = "output:analog-stereo"
}
}
}
]dont forget to restart the audio (pipewire, wireplumber, pipewire-pulse) services or systemctl reboot.
Offline
#4 2025-03-20 03:18:59
- LightningStab
- Member
- Registered: 2025-02-08
- Posts: 13
Re: Pipewire not detecting speaker
V1del wrote:
not much actable info here, what outputs do you get from
aplay -l amixer -c0 #or whatever index your speakers are on in aplay -l pactl list cards pactl list sinkspost that in [code][/code] tags
sorry i dont really know what im doing, my output is
Card #48
Name: alsa_card.pci-0000_01_00.1
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.card.longname = "HDA NVidia at 0x91080000 irq 17"
api.alsa.card.name = "HDA NVidia"
api.alsa.path = "hw:1"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
api.dbus.ReserveDevice1.Priority = "-20"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:01:00.1"
device.description = "GA102 High Definition Audio Controller"
device.enum.api = "udev"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_01_00.1"
device.nick = "HDA NVidia"
device.plugged.usec = "6928066"
device.product.id = "0x1aef"
device.product.name = "GA102 High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.vendor.id = "0x10de"
device.vendor.name = "NVIDIA Corporation"
media.class = "Audio/Device"
spa.object.id = "4"
factory.id = "15"
client.id = "47"
object.id = "48"
object.serial = "48"
object.path = "alsa:acp:NVidia"
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0x91080000 irq 17"
alsa.driver_name = "snd_hda_intel"
alsa.mixer_name = "Nvidia GPU 9a HDMI/DP"
alsa.components = "HDA:10de009a,1458403f,00100100"
alsa.id = "NVidia"
device.string = "1"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: yes)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: yes)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
Active Profile: output:hdmi-stereo
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 1"
device.icon_name = "video-display"
card.profile.port = "0"
device.product.name = "VG248"
iec958.codecs.detected = "[\"PCM\"]"
Part of profile(s): output:hdmi-stereo
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 2"
device.icon_name = "video-display"
card.profile.port = "1"
device.product.name = "VG279QR"
iec958.codecs.detected = "[\"PCM\"]"
Part of profile(s): output:hdmi-stereo-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 3"
device.icon_name = "video-display"
card.profile.port = "2"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 4"
device.icon_name = "video-display"
card.profile.port = "3"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
Card #49
Name: alsa_card.pci-0000_00_1f.3
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.card.longname = "HDA Intel PCH at 0x4012110000 irq 163"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.path = "hw:0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:00:1f.3"
device.description = "Built-in Audio"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_1f.3"
device.nick = "HDA Intel PCH"
device.plugged.usec = "6957207"
device.product.id = "0x06c8"
device.product.name = "Comet Lake PCH cAVS"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
media.class = "Audio/Device"
spa.object.id = "2"
factory.id = "15"
client.id = "47"
object.id = "49"
object.serial = "49"
object.path = "alsa:acp:PCH"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0x4012110000 irq 163"
alsa.driver_name = "snd_hda_intel"
alsa.mixer_name = "Realtek ALCS1200A"
alsa.components = "HDA:10ec0b00,10438797,00100001"
alsa.id = "PCH"
device.string = "0"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: yes)
output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: yes)
output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: yes)
output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: yes)
output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: yes)
output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: yes)
output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: yes)
output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: yes)
output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: no)
output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
pro-audio: Pro Audio (sinks: 2, sources: 2, priority: 1, available: yes)
Active Profile: output:analog-stereo
Ports:
analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 1"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "mic"
port.availability-group = "Legacy 2"
device.icon_name = "audio-input-microphone"
card.profile.port = "1"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
Properties:
port.type = "line"
port.availability-group = "Legacy 3"
card.profile.port = "2"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, available)
Properties:
port.type = "line"
port.availability-group = "Legacy 4"
card.profile.port = "3"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, available)
Properties:
port.type = "headphones"
port.availability-group = "Legacy 5"
device.icon_name = "audio-headphones"
card.profile.port = "4"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
Properties:
port.type = "spdif"
card.profile.port = "5"
Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereoand
Sink #1015
State: SUSPENDED
Name: alsa_output.pci-0000_00_1f.3.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 96808 / 148% / 10.17 dB, front-right: 96808 / 148% / 10.17 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.class = "generic"
alsa.components = "HDA:10ec0b00,10438797,00100001"
alsa.device = "0"
alsa.driver_name = "snd_hda_intel"
alsa.id = "ALCS1200A Analog"
alsa.long_card_name = "HDA Intel PCH at 0x4012110000 irq 163"
alsa.mixer_name = "Realtek ALCS1200A"
alsa.name = "ALCS1200A Analog"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HDA Intel PCH at 0x4012110000 irq 163"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.path = "front:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "5"
device.api = "alsa"
device.class = "sound"
device.icon_name = "audio-card-analog"
device.id = "49"
device.profile.description = "Analog Stereo"
device.profile.name = "analog-stereo"
device.routes = "2"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Built-in Audio"
node.name = "alsa_output.pci-0000_00_1f.3.analog-stereo"
node.nick = "ALCS1200A Analog"
node.pause-on-idle = "false"
object.path = "alsa:acp:PCH:5:playback"
port.group = "playback"
priority.driver = "1009"
priority.session = "1009"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "47"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "128"
object.serial = "1015"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:00:1f.3"
device.enum.api = "udev"
device.form_factor = "internal"
device.name = "alsa_card.pci-0000_00_1f.3"
device.nick = "HDA Intel PCH"
device.plugged.usec = "6957207"
device.product.id = "0x06c8"
device.product.name = "Comet Lake PCH cAVS"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
spa.object.id = "2"
device.string = "0"
Ports:
analog-output-lineout: Line Out (type: Line, priority: 9000, availability group: Legacy 4, available)
analog-output-headphones: Headphones (type: Headphones, priority: 9900, availability group: Legacy 5, available)
Active Port: analog-output-headphones
Formats:
pcm
Sink #4201
State: RUNNING
Name: alsa_output.pci-0000_01_00.1.hdmi-stereo
Description: GA102 High Definition Audio Controller Digital Stereo (HDMI)
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.card = "1"
alsa.card_name = "HDA NVidia"
alsa.class = "generic"
alsa.components = "HDA:10de009a,1458403f,00100100"
alsa.device = "3"
alsa.driver_name = "snd_hda_intel"
alsa.id = "HDMI 0"
alsa.long_card_name = "HDA NVidia at 0x91080000 irq 17"
alsa.mixer_name = "Nvidia GPU 9a HDMI/DP"
alsa.name = "VG248"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HDA NVidia at 0x91080000 irq 17"
api.alsa.card.name = "HDA NVidia"
api.alsa.path = "hdmi:1"
api.alsa.pcm.card = "1"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "4"
device.api = "alsa"
device.class = "sound"
device.icon_name = "audio-card-analog"
device.id = "48"
device.profile.description = "Digital Stereo (HDMI)"
device.profile.name = "hdmi-stereo"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
iec958.codecs = "[\"PCM\"]"
media.class = "Audio/Sink"
device.description = "GA102 High Definition Audio Controller"
node.name = "alsa_output.pci-0000_01_00.1.hdmi-stereo"
node.nick = "VG248"
node.pause-on-idle = "false"
object.path = "alsa:acp:NVidia:4:playback"
port.group = "playback"
priority.driver = "696"
priority.session = "696"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "47"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "109"
object.serial = "4201"
node.max-latency = "16384/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "32"
api.alsa.headroom = "0"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "1"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio1"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:01:00.1"
device.enum.api = "udev"
device.name = "alsa_card.pci-0000_01_00.1"
device.nick = "HDA NVidia"
device.plugged.usec = "6928066"
device.product.id = "0x1aef"
device.product.name = "GA102 High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
device.vendor.id = "0x10de"
device.vendor.name = "NVIDIA Corporation"
spa.object.id = "4"
device.string = "1"
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
Active Port: hdmi-output-0
Formats:
pcm
Offline
#5 2025-03-20 17:40:32
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 24,301
Re: Pipewire not detecting speaker
Card is there and detected, volume overdriven to a potentially dangerous level, when actually trying to play back something what do you get from
sudo fuser -v /dev/snd/*
pactl list sink-inputsOffline
#6 2025-03-21 22:13:42
- LightningStab
- Member
- Registered: 2025-02-08
- Posts: 13
Re: Pipewire not detecting speaker
the speaker has a knob on it that i use for control, i have played with random bars and may have left some at max
/dev/snd/controlC0: User 810 F.... wireplumber
/dev/snd/controlC1: User 809 F.... pipewire
User 810 F.... wireplumber
/dev/snd/pcmC1D3p: User 809 F...m pipewire
/dev/snd/seq: User 809 F.... pipewireSink Input #5083
Driver: PipeWire
Owner Module: n/a
Client: 5082
Sink: 5257
Sample Specification: float32le 2ch 48000Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Sink Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Blender"
application.process.id = "298151"
application.process.user = "Reagan"
application.process.host = "archbox"
application.process.binary = "blender"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id = "803ba6bf040b4e53955f5b7bd7464e64"
application.process.session_id = "2"
media.name = "Playback"
pulse.corked = "false"
node.rate = "1/48000"
node.latency = "512/48000"
stream.is-live = "true"
node.name = "Blender"
node.want-driver = "true"
node.autoconnect = "true"
media.class = "Stream/Output/Audio"
port.group = "stream.0"
adapt.follower.spa-node = ""
object.register = "false"
factory.id = "7"
clock.quantum-limit = "8192"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
client.id = "44"
object.id = "112"
object.serial = "5083"
pulse.attr.minreq = "4096"
pulse.attr.maxlength = "4194304"
pulse.attr.tlength = "12288"
pulse.attr.prebuf = "8200"
node.driver-id = "136"
module-stream-restore.id = "sink-input-by-application-name:Blender"
Sink Input #5271
Driver: PipeWire
Owner Module: n/a
Client: 3413
Sink: 5257
Sample Specification: float32le 2ch 48000Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Sink Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Firefox"
application.process.id = "172006"
application.process.user = "Reagan"
application.process.host = "archbox"
application.process.binary = "firefox"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "803ba6bf040b4e53955f5b7bd7464e64"
application.process.session_id = "2"
media.name = "(6) Grok / X"
pulse.corked = "false"
node.rate = "1/48000"
node.latency = "900/48000"
stream.is-live = "true"
node.name = "Firefox"
node.want-driver = "true"
node.autoconnect = "true"
media.class = "Stream/Output/Audio"
port.group = "stream.0"
adapt.follower.spa-node = ""
object.register = "false"
factory.id = "7"
clock.quantum-limit = "8192"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
client.id = "75"
object.id = "91"
object.serial = "5271"
pulse.attr.maxlength = "4194304"
pulse.attr.tlength = "12000"
pulse.attr.prebuf = "9608"
pulse.attr.minreq = "2400"
node.driver-id = "136"
module-stream-restore.id = "sink-input-by-application-name:Firefox"
Sink Input #5290
Driver: PipeWire
Owner Module: n/a
Client: 3413
Sink: 5257
Sample Specification: float32le 2ch 48000Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Sink Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Firefox"
application.process.id = "172006"
application.process.user = "Reagan"
application.process.host = "archbox"
application.process.binary = "firefox"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "803ba6bf040b4e53955f5b7bd7464e64"
application.process.session_id = "2"
media.name = "(32) All The Reasons Why Abolishing The DOE Is A Great Move By Trump | Ep. 1560 - YouTube"
pulse.corked = "false"
node.rate = "1/48000"
node.latency = "3600/48000"
stream.is-live = "true"
node.name = "Firefox"
node.want-driver = "true"
node.autoconnect = "true"
media.class = "Stream/Output/Audio"
port.group = "stream.0"
adapt.follower.spa-node = ""
object.register = "false"
factory.id = "7"
clock.quantum-limit = "8192"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
client.id = "75"
object.id = "117"
object.serial = "5290"
pulse.attr.maxlength = "4194304"
pulse.attr.tlength = "48000"
pulse.attr.prebuf = "38408"
pulse.attr.minreq = "9600"
node.driver-id = "136"
module-stream-restore.id = "sink-input-by-application-name:Firefox"Offline
#7 2025-03-21 23:12:04
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 24,301
Re: Pipewire not detecting speaker
You're playing to the HDMI device.
pactl set-default-sink alsa_output.pci-0000_00_1f.3.analog-stereo
#Should move things already, if it doesn't try a
pactl move-sink-input 5083 alsa_output.pci-0000_00_1f.3.analog-stereo #The index will change depending on when you start playback, recheck with pactl list-sink-inputsgenerally such a constellation should be visible in pavucontrol as well.
Offline
#8 2025-03-22 12:58:28
- LightningStab
- Member
- Registered: 2025-02-08
- Posts: 13
Re: Pipewire not detecting speaker
when i did your first command a pop came from the speaker but nothing was playing through the speaker, after your second command nothing changed but now for some reason when i input just says "no valid command specified."
i dont know if this helps but here are some pictures https://postimg.cc/gallery/6Bxxc4Y
Offline
Pages: 1