Arch Linux

krychle

Member

Registered: 2006-11-22

Posts: 7

TVcard issue - no sound, LifeView FlyDVB Trio

i have problems with this tvcard, i tried analogTV with tvtime and FMradio with gnomeradio, and it seems the card is working, in tvtime i get video, gnomeradio tune some station, but i don't have sound.

i tried things from these wiki pages:
http://linuxtv.org/v4lwiki/index.php/Saa7134-alsa
http://gentoo-wiki.com/HARDWARE_saa7134

i think the problem can be in driver autodetection (looks all is ok) or in alsa

edit: i turn on all module debug options:

modprobe saa7134 card=84 tuner=54 alsa=1 video-debug=1 audio-debug=1 vbi-debug=1 ts-debug=1 core-debug=1 irq-debug=1 i2c-debug=1

dmesg:

saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:02:09.0, rev: 208, irq: 20, latency: 64, mmio: 0xff5ff800
saa7133[0]: subsystem: 5168:0319, board: LifeView FlyDVB Trio [card=84,insmod option]
saa7133[0]: board init: gpio is 211400
tuner 2-004b: chip found @ 0x96 (saa7133[0])
tuner 2-004b: setting tuner address to 61
tuner 2-004b: type set to tda8290+75a
tuner 2-004b: setting tuner address to 61
tuner 2-004b: type set to tda8290+75a
saa7133[0]: i2c eeprom 00: 68 51 19 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 00 60 0a ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 f9 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 00 10 c0 96 12 08 00 c2 96 c6 1c 16 3a 15 ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:02:09.0, rev: 208, irq: 20, latency: 64, mmio: 0xff5ff800
saa7133[0]: subsystem: 5168:0319, board: LifeView FlyDVB Trio [card=84,insmod option]
saa7133[0]: board init: gpio is 211400
saa7133[0]/core: hwinit1
saa7133[0]: i2c xfer: < f5 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < 8f ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < 84 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < 86 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < 94 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
tuner 2-004b: chip found @ 0x96 (saa7133[0])
tuner i2c attach [addr=0x4b,client=(tuner unset)]
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: < c1 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: <c3>
saa7133[0]: i2c xfer: < c5 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < c7 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: <96>
tuner 2-004b: setting tuner address to 61
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <c3>
tuner 2-004b: type set to tda8290+75a
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: < c1 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: <c3>
saa7133[0]: i2c xfer: < c5 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < c7 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: <96>
tuner 2-004b: setting tuner address to 61
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <c3>
tuner 2-004b: type set to tda8290+75a
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: < c0 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < c2 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < c4 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < c6 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < c8 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < ca ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < cc ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < ce ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < d0 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < d2 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < d4 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < d6 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < d8 ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < da ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < dc ERROR: NO_DEVICE
saa7133[0]: i2c xfer: < de ERROR: NO_DEVICE
saa7133[0]: i2c xfer: <a0>
saa7133[0]: i2c xfer: <a1>
saa7133[0]: i2c eeprom 00: 68 51 19 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 00 60 0a ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 f9 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 00 10 c0 96 12 08 00 c2 96 c6 1c 16 3a 15 ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c xfer: <12>
saa7133[0]/core: hwinit2
saa7133[0]/video: set tv norm = PAL
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]/video: video input = 0 [Television]
saa7133[0]/video: set tv norm = PAL
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <c2>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <97>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: i2c xfer: <96>
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
saa7133[0]/video: DCSDT: pll: not locked, sync: no, norm: (no signal)
saa7133[0]/audio: tvaudio thread scan start [1]
saa7133[0]/audio: scanning: B/G D/K I
saa7133[0]/audio: tvaudio thread status: 0x100002 [D/K (in progress)]
saa7133[0]/audio: detailed status: ############# init done 

i have newest kernel, from this package >>> kernel26 2.6.19.2-1

... sorry for my english, i hope you understand ...[/code]

there are NO_DEVICE errors, but i look on card and there are two 8275a chips, then i think card=84 and tuner=54 is ok, now i really don't know what to do :evil: