You are not logged in.
Pages: 1
Hello!
I have a problem while sound recording... I tried a lot of programs to record sound, etc. audacity, ardour and a few for windows through wine...
And all of them have 1 problem: When I record something, I hear what I recorded, but with beeeeeeeeep in background....
Someone with any idea?
Thx.
Offline
Could you post the output of
lspci
?
Offline
so this is the log of lspci...if you mean this.
00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80)
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
02:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
[root@localhost puma]# lspci -v
00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01)
Subsystem: ATI Technologies Inc Unknown device 5a31
Flags: bus master, 66MHz, medium devsel, latency 64
Memory at <ignored> (64-bit, non-prefetchable)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fe100000-fe1fffff
Prefetchable memory behind bridge: bdf00000-ddefffff
Capabilities: [b0] Subsystem: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 1397
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 1397
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 1397
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
Subsystem: ASUSTeK Computer Inc. Unknown device 1397
Flags: 66MHz, medium devsel
I/O ports at 0b00 [size=16]
Memory at fed00000 (32-bit, non-prefetchable) [size=1K]
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Unknown device 1397
Flags: bus master, 66MHz, medium devsel, latency 0
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at ff00 [size=16]
Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device 1393
Flags: bus master, slow devsel, latency 64, IRQ 5
Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: fe200000-feafffff
Prefetchable memory behind bridge: ddf00000-dfefffff
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M] (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device 1392
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
Memory at c0000000 (32-bit, prefetchable) [size=256M]
I/O ports at 9800 [size=256]
Memory at fe1f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fe1c0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: ASUSTeK Computer Inc. Unknown device 1045
Flags: bus master, medium devsel, latency 64, IRQ 4
I/O ports at b800 [size=256]
Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
Subsystem: ASUSTeK Computer Inc. Unknown device 1397
Flags: bus master, medium devsel, latency 168, IRQ 5
Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 40000000-41fff000 (prefetchable)
Memory window 1: 42000000-43fff000
I/O window 0: 0000a000-0000a0ff
I/O window 1: 0000a400-0000a4ff
16-bit legacy interface ports at 0001
02:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
Subsystem: ASUSTeK Computer Inc. Unknown device 1397
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at feaff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)
Subsystem: ASUSTeK Computer Inc. Unknown device 1397
Flags: medium devsel, IRQ 5
Memory at feaff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. A6U notebook embedded card
Flags: bus master, fast devsel, latency 64, IRQ 5
Memory at feafc000 (32-bit, non-prefetchable) [size=8K]Offline
This card uses the hda-intel alsa driver, and I think it uses the Realtek ALC861 codec. You can check this by looking at the Chip: line in alsamixer.
One thing you can try is to use some different model parameters when loading the snd-hda-intel module:
(From Documentation/sound/alsa/ALSA-Configuration.txt in the kernel source.)
ALC861/660
3stack 3-jack
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack with SPDIF I/O
3stack-660 3-jack (for ALC660)
uniwill-m31 Uniwill M31 laptop
auto auto-config reading BIOS (default)
First remove the module. You might have to exit kde or whatever you use and do this from the console, since the sound modules often are in use by sound servers etc.
rmmod snd-hda-intel
and reload it with eg.
modprobe snd-hda-intel model=3stack
or any of the other.
Another parameter that often is useful for hda-intel chips, when they make clicking or sparking sound when playing, is position_fix. I don't really think it will help for your problem, but it's worth a try:
modprobe snd-hda-intel position_fix=1 ( 2 or 3)
If nothing of this works, you can try it again with the latest alsa drivers:
http://www.alsa-project.org/alsa/ftp/dr … c2.tar.bz2
If you have the kernel source installed (in arch that is standard), it's easy to install this:
./configure --with-cards=hda-intel
make
make install (as root)
reboot (or unload all sound modules and reload snd-hda-intel).
Offline
Pages: 1