pipewire does not work on i3.

gltkyn · 2025-05-04 16:10:29

[SOLVED] have a problem any help is appreciated. While i had gnome desktop enviroment i got my jack broken in pc sound port which i couldn't remove. Switched back to i3 now i can't route sound to speakers. At first my system taken my headphones as the main output and speakers was now visible. Still i have no sound after speakers was recognized.

Last edited by gltkyn (2025-05-07 01:41:45)

V1del · 2025-05-04 16:17:39

Your desktop environment is largely irrelevant to whether your sound daemon works or not.

What's much more important is that you start it properly so you get an user session. Assuming you're using .xinitrc/startx make sure you've read: https://wiki.archlinux.org/title/Xinit#xinitrc and retain the appropriate if conditional block that loads the /etc/X11/xinit/xinitrc.d/50-systemd-user.sh script, so you get a proper user session and the correct mechanisms can trigger to load your stuff. And then check proper routings in pavucontrol or qpwgraph or so.

If that doesn't resolve your question what output do you get from

sudo fuser -v /dev/snd/*
systemctl --user status pipewire{,-pulse} wireplumber
aplay -lL
pactl list cards
pactl list sinks

post that wrapped in [code][/code] tags.

Last edited by V1del (2025-05-04 16:19:43)

gltkyn · 2025-05-07 01:43:13

Thank you for the well documented answer. Will check out throughoutly. I have removed the broken thing and now its functioning. I will write n case same thing happens to someone else .but can't switch to speakers when jack is plugged in. I have tried it with a broken earphone cable and same thing happens. no audio from speakers while jack is in. I guess it's about system being installed with a connected earphone. I will mark it solved.

For the curious minds:

[gltkyn@archofgltkyn ~]$ sudo fuser -v /dev/snd/*
                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  gltkyn      666 F.... pipewire
                     gltkyn      667 F.... wireplumber
/dev/snd/pcmC0D0p:   gltkyn      666 F...m pipewire
/dev/snd/seq:        gltkyn      666 F.... pipewire

[gltkyn@archofgltkyn ~]$ systemctl --user status pipewire{,-pulse} wireplumber
● pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/
pipewire.service; enabled; preset: enabled)
     Active: active (running) since Tue 2025-05-06 21:28:54 -03; 1h 6min ago
 Invocation: 4a5778e8c3da412ba3fd35502dfb65e6
TriggeredBy: ● pipewire.socket
   Main PID: 666 (pipewire)
      Tasks: 3 (limit: 9012)
     Memory: 9M (peak: 21.2M, swap: 1.9M, swap peak: 2.9M)
        CPU: 8.790s
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
             └─666 /usr/bin/pipewire

May 06 21:28:54 archofgltkyn systemd[654]: Started PipeWire Multimedia Service.

● pipewire-pulse.service - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd
/user/pipewire-pulse.service; enabled; preset: enabled)
     Active: active (running) since Tue 2025-05-06 21:28:54 -03; 1h 6min ago
 Invocation: 48ce678fea0a488f838595cb5557c6c3
TriggeredBy: ● pipewire-pulse.socket
   Main PID: 669 (pipewire-pulse)
      Tasks: 3 (limit: 9012)
     Memory: 9.5M (peak: 45.4M, swap: 696K, swap peak: 8.3M)
        CPU: 14.932s
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire-pulse.service
             └─669 /usr/bin/pipewire-pulse

May 06 21:28:54 archofgltkyn systemd[654]: Started PipeWire PulseAudio.
May 06 22:09:15 archofgltkyn pipewire-pulse[669]: mod.protocol-pulse:
 client 0x5fd41b6de270 [Web]: stream 0x5fd419b901a0 OVERFLOW channel:4
May 06 22:09:15 archofgltkyn pipewire-pulse[669]: mod.protocol-pulse:
 client 0x5fd41b6de270 [Web]: stream 0x5fd419b901a0 OVERFLOW channel:4
May 06 22:09:15 archofgltkyn pipewire-pulse[669]: mod.protocol-pulse:
 client 0x5fd41b6de270 [Web]: stream 0x5fd419b901a0 OVERFLOW channel:4
May 06 22:09:15 archofgltkyn pipewire-pulse[669]: mod.protocol-pulse:
 client 0x5fd41b6de270 [Web]: stream 0x5fd419b901a0 OVERFLOW channel:4
May 06 22:09:15 archofgltkyn pipewire-pulse[669]: mod.protocol-pulse:
 client 0x5fd41b6de270 [Web]: stream 0x5fd419b901a0 OVERFLOW channel:4
May 06 22:09:15 archofgltkyn pipewire-pulse[669]: mod.protocol-pulse:
 client 0x5fd41b6de270 [Web]: stream 0x5fd419b901a0 OVERFLOW channel:4

● wireplumber.service - Multimedia Service Session Manager
     Loaded: loaded (/usr/lib/systemd/us
er/wireplumber.service; enabled; preset: enabled)
     Active: active (running) since Tue 2025-05-06 21:28:54 -03; 1h 6min ago
 Invocation: fd8b1ab2c99d4f4d8168f5d9cac3fca5
   Main PID: 667 (wireplumber)
      Tasks: 6 (limit: 9012)
     Memory: 25.3M (peak: 25.8M)
        CPU: 3.627s
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/wireplumber.service
             └─667 /usr/bin/wireplumber

May 06 21:28:54 archofgltkyn systemd[654]: Started Multimedia Service Session Manager.
May 06 21:28:54 archofgltkyn wireplumber[667]: wp-internal-comp-loader: Loading p
rofile 'main'
May 06 21:28:54 archofgltkyn wireplumber[667]: default: Failed to get
 percentage from UPower: org.freedesktop.DBus.Error.NameHasNoOwner
May 06 21:28:54 archofgltkyn wireplumber[667]: spa.bluez5: BlueZ syst
em service is not available
May 06 21:28:54 archofgltkyn wireplumber[667]: wp-device: SPA handle 'api.libcame
ra.enum.manager' could not be loaded; is it installed?
May 06 21:28:54 archofgltkyn wireplumber[667]: s-monitors-libcamera: PipeWire's l
ibcamera SPA plugin is missing or broken. Some camera types may not be supported.

[gltkyn@archofgltkyn ~]$ aplay -lL
null
    Discard all samples (playback) or generate zero samples (capture)
pipewire
    PipeWire Sound Server
default
    Default ALSA Output (currently PipeWire Media Server)
sysdefault:CARD=sofhdadsp
    sof-hda-dsp, 
    Default Audio Device
**** List of PLAYBACK Hardware Devices ****
card 0: sofhdadsp [sof-hda-dsp], device 0: HDA Analog (*) []
  Subdevices: 0/1
  Subdevice #0: subdevice #0
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI1 (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: sofhdadsp [sof-hda-dsp], device 4: HDMI2 (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: sofhdadsp [sof-hda-dsp], device 5: HDMI3 (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: sofhdadsp [sof-hda-dsp], device 31: HDA Analog Deep Buffer (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

[gltkyn@archofgltkyn ~]$ pactl list cards
Card #47
	Name: alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.card.longname = "HUAWEI-RLEF_XX-M1010-RLEF_XX_PCB"
		api.alsa.card.name = "sof-hda-dsp"
		api.alsa.path = "hw:0"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		device.description = "Alder Lake PCH-P High Definition Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic"
		device.nick = "sof-hda-dsp"
		device.plugged.usec = "3345635"
		device.product.id = "0x51c8"
		device.product.name = "Alder Lake PCH-P High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		media.class = "Audio/Device"
		spa.object.id = "2"
		factory.id = "15"
		client.id = "46"
		object.id = "47"
		object.serial = "47"
		object.path = "alsa:acp:sofhdadsp"
		alsa.card = "0"
		alsa.card_name = "sof-hda-dsp"
		alsa.long_card_name = "HUAWEI-RLEF_XX-M1010-RLEF_XX_PCB"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		alsa.mixer_name = "Conexant CX8070"
		alsa.components = "HDA:8086281c,80860101,00100000 HDA:14f11f86,19e5327d,00100100 cfg-dmics:4"
		alsa.id = "sofhdadsp"
		device.string = "0"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		HiFi (HDMI1, HDMI2, HDMI3, Headphones, Mic1, Mic2): Play HiFi quality Music (HDMI1, HDMI2, HDMI3, Headphones, Mic1, Mic2) (sinks: 4, sources: 2, priority: 10300, available: yes)
		HiFi (HDMI1, HDMI2, HDMI3, Mic1, Mic2, Speaker): Play HiFi quality Music (HDMI1, HDMI2, HDMI3, Mic1, Mic2, Speaker) (sinks: 4, sources: 2, priority: 10200, available: yes)
		pro-audio: Pro Audio (sinks: 5, sources: 3, priority: 1, available: yes)
	Active Profile: HiFi (HDMI1, HDMI2, HDMI3, Headphones, Mic1, Mic2)
	Ports:
		[Out] HDMI3: HDMI / DisplayPort 3 Output (type: HDMI, priority: 700, latency offset: 0 usec, availability group: HDMI/DP,pcm=5, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "HDMI/DP,pcm=5"
				device.icon_name = "video-display"
				card.profile.port = "0"
			Part of profile(s): HiFi (HDMI1, HDMI2, HDMI3, Mic1, Mic2, Speaker), HiFi (HDMI1, HDMI2, HDMI3, Headphones, Mic1, Mic2)
		[Out] HDMI2: HDMI / DisplayPort 2 Output (type: HDMI, priority: 600, latency offset: 0 usec, availability group: HDMI/DP,pcm=4, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "HDMI/DP,pcm=4"
				device.icon_name = "video-display"
				card.profile.port = "1"
			Part of profile(s): HiFi (HDMI1, HDMI2, HDMI3, Mic1, Mic2, Speaker), HiFi (HDMI1, HDMI2, HDMI3, Headphones, Mic1, Mic2)
		[Out] HDMI1: HDMI / DisplayPort 1 Output (type: HDMI, priority: 500, latency offset: 0 usec, availability group: HDMI/DP,pcm=3, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "HDMI/DP,pcm=3"
				device.icon_name = "video-display"
				card.profile.port = "2"
			Part of profile(s): HiFi (HDMI1, HDMI2, HDMI3, Mic1, Mic2, Speaker), HiFi (HDMI1, HDMI2, HDMI3, Headphones, Mic1, Mic2)
		[Out] Speaker: Speaker (type: Speaker, priority: 100, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "speaker"
				device.icon_name = "audio-speakers"
				card.profile.port = "3"
			Part of profile(s): HiFi (HDMI1, HDMI2, HDMI3, Mic1, Mic2, Speaker)
		[In] Mic2: Stereo Microphone (type: Mic, priority: 200, latency offset: 0 usec, availability group: Mic, not available)
			Properties:
				port.type = "mic"
				port.availability-group = "Mic"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "4"
			Part of profile(s): HiFi (HDMI1, HDMI2, HDMI3, Mic1, Mic2, Speaker), HiFi (HDMI1, HDMI2, HDMI3, Headphones, Mic1, Mic2)
		[In] Mic1: Digital Microphone (type: Mic, priority: 100, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "mic"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "5"
			Part of profile(s): HiFi (HDMI1, HDMI2, HDMI3, Mic1, Mic2, Speaker), HiFi (HDMI1, HDMI2, HDMI3, Headphones, Mic1, Mic2)
		[Out] Headphones: Headphones (type: Headphones, priority: 200, latency offset: 0 usec, availability group: Headphone, available)
			Properties:
				port.type = "headphones"
				port.availability-group = "Headphone"
				device.icon_name = "audio-headphones"
				card.profile.port = "6"
			Part of profile(s): HiFi (HDMI1, HDMI2, HDMI3, Headphones, Mic1, Mic2)

[gltkyn@archofgltkyn ~]$ pactl list sinks
Sink #1406
	State: SUSPENDED
	Name: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI3__sink
	Description: Alder Lake PCH-P High Definition Audio Controller HDMI / DisplayPort 3 Output
	Driver: PipeWire
	Sample Specification: s24-32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI3__sink.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "0"
		alsa.card_name = "sof-hda-dsp"
		alsa.class = "generic"
		alsa.components = "HDA:8086281c,80860101,00100000 HDA:14f11f86,19e5327d,00100100 cfg-dmics:4"
		alsa.device = "5"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		alsa.id = "HDMI3 (*)"
		alsa.long_card_name = "HUAWEI-RLEF_XX-M1010-RLEF_XX_PCB"
		alsa.mixer_device = "_ucm0001.hw:sofhdadsp"
		alsa.mixer_name = "Conexant CX8070"
		alsa.name = ""
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HUAWEI-RLEF_XX-M1010-RLEF_XX_PCB"
		api.alsa.card.name = "sof-hda-dsp"
		api.alsa.open.ucm = "true"
		api.alsa.path = "hw:sofhdadsp,5"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "0"
		device.api = "alsa"
		device.class = "sound"
		device.icon_name = "video-display"
		device.id = "47"
		device.profile.description = "HDMI / DisplayPort 3 Output"
		device.profile.name = "HiFi: HDMI3: sink"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Alder Lake PCH-P High Definition Audio Controller"
		node.name = "alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI3__sink"
		node.nick = "HDMI / DisplayPort 3 Output"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:sofhdadsp:0:playback"
		port.group = "playback"
		priority.driver = "664"
		priority.session = "664"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "65"
		object.serial = "1406"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		device.enum.api = "udev"
		device.name = "alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic"
		device.nick = "sof-hda-dsp"
		device.plugged.usec = "3345635"
		device.product.id = "0x51c8"
		device.product.name = "Alder Lake PCH-P High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		spa.object.id = "2"
		device.string = "0"
	Ports:
		[Out] HDMI3: HDMI / DisplayPort 3 Output (type: HDMI, priority: 700, availability group: HDMI/DP,pcm=5, not available)
	Active Port: [Out] HDMI3
	Formats:
		pcm

Sink #1407
	State: SUSPENDED
	Name: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI2__sink
	Description: Alder Lake PCH-P High Definition Audio Controller HDMI / DisplayPort 2 Output
	Driver: PipeWire
	Sample Specification: s24-32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI2__sink.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "0"
		alsa.card_name = "sof-hda-dsp"
		alsa.class = "generic"
		alsa.components = "HDA:8086281c,80860101,00100000 HDA:14f11f86,19e5327d,00100100 cfg-dmics:4"
		alsa.device = "4"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		alsa.id = "HDMI2 (*)"
		alsa.long_card_name = "HUAWEI-RLEF_XX-M1010-RLEF_XX_PCB"
		alsa.mixer_device = "_ucm0001.hw:sofhdadsp"
		alsa.mixer_name = "Conexant CX8070"
		alsa.name = ""
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HUAWEI-RLEF_XX-M1010-RLEF_XX_PCB"
		api.alsa.card.name = "sof-hda-dsp"
		api.alsa.open.ucm = "true"
		api.alsa.path = "hw:sofhdadsp,4"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "1"
		device.api = "alsa"
		device.class = "sound"
		device.icon_name = "video-display"
		device.id = "47"
		device.profile.description = "HDMI / DisplayPort 2 Output"
		device.profile.name = "HiFi: HDMI2: sink"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Alder Lake PCH-P High Definition Audio Controller"
		node.name = "alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI2__sink"
		node.nick = "HDMI / DisplayPort 2 Output"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:sofhdadsp:1:playback"
		port.group = "playback"
		priority.driver = "680"
		priority.session = "680"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "42"
		object.serial = "1407"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		device.enum.api = "udev"
		device.name = "alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic"
		device.nick = "sof-hda-dsp"
		device.plugged.usec = "3345635"
		device.product.id = "0x51c8"
		device.product.name = "Alder Lake PCH-P High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		spa.object.id = "2"
		device.string = "0"
	Ports:
		[Out] HDMI2: HDMI / DisplayPort 2 Output (type: HDMI, priority: 600, availability group: HDMI/DP,pcm=4, not available)
	Active Port: [Out] HDMI2
	Formats:
		pcm

Sink #1408
	State: SUSPENDED
	Name: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI1__sink
	Description: Alder Lake PCH-P High Definition Audio Controller HDMI / DisplayPort 1 Output
	Driver: PipeWire
	Sample Specification: s24-32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI1__sink.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "0"
		alsa.card_name = "sof-hda-dsp"
		alsa.class = "generic"
		alsa.components = "HDA:8086281c,80860101,00100000 HDA:14f11f86,19e5327d,00100100 cfg-dmics:4"
		alsa.device = "3"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		alsa.id = "HDMI1 (*)"
		alsa.long_card_name = "HUAWEI-RLEF_XX-M1010-RLEF_XX_PCB"
		alsa.mixer_device = "_ucm0001.hw:sofhdadsp"
		alsa.mixer_name = "Conexant CX8070"
		alsa.name = ""
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HUAWEI-RLEF_XX-M1010-RLEF_XX_PCB"
		api.alsa.card.name = "sof-hda-dsp"
		api.alsa.open.ucm = "true"
		api.alsa.path = "hw:sofhdadsp,3"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "2"
		device.api = "alsa"
		device.class = "sound"
		device.icon_name = "video-display"
		device.id = "47"
		device.profile.description = "HDMI / DisplayPort 1 Output"
		device.profile.name = "HiFi: HDMI1: sink"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Alder Lake PCH-P High Definition Audio Controller"
		node.name = "alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__HDMI1__sink"
		node.nick = "HDMI / DisplayPort 1 Output"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:sofhdadsp:2:playback"
		port.group = "playback"
		priority.driver = "696"
		priority.session = "696"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "87"
		object.serial = "1408"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		device.enum.api = "udev"
		device.name = "alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic"
		device.nick = "sof-hda-dsp"
		device.plugged.usec = "3345635"
		device.product.id = "0x51c8"
		device.product.name = "Alder Lake PCH-P High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		spa.object.id = "2"
		device.string = "0"
	Ports:
		[Out] HDMI1: HDMI / DisplayPort 1 Output (type: HDMI, priority: 500, availability group: HDMI/DP,pcm=3, not available)
	Active Port: [Out] HDMI1
	Formats:
		pcm

Sink #1409
	State: RUNNING
	Name: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__Headphones__sink
	Description: Alder Lake PCH-P High Definition Audio Controller Headphones
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 34078 /  52% / -17.04 dB,   front-right: 34078 /  52% / -17.04 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__Headphones__sink.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "0"
		alsa.card_name = "sof-hda-dsp"
		alsa.class = "generic"
		alsa.components = "HDA:8086281c,80860101,00100000 HDA:14f11f86,19e5327d,00100100 cfg-dmics:4"
		alsa.device = "0"
		alsa.driver_name = "snd_soc_skl_hda_dsp"
		alsa.id = "HDA Analog (*)"
		alsa.long_card_name = "HUAWEI-RLEF_XX-M1010-RLEF_XX_PCB"
		alsa.mixer_device = "_ucm0001.hw:sofhdadsp"
		alsa.mixer_name = "Conexant CX8070"
		alsa.name = ""
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HUAWEI-RLEF_XX-M1010-RLEF_XX_PCB"
		api.alsa.card.name = "sof-hda-dsp"
		api.alsa.open.ucm = "true"
		api.alsa.path = "hw:sofhdadsp"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "6"
		device.api = "alsa"
		device.class = "sound"
		device.icon_name = "audio-headphones"
		device.id = "47"
		device.profile.description = "Headphones"
		device.profile.name = "HiFi: Headphones: sink"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Alder Lake PCH-P High Definition Audio Controller"
		node.name = "alsa_output.pci-0000_00_1f.3-platform-skl_hda_dsp_generic.HiFi__Headphones__sink"
		node.nick = "Headphones"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:sofhdadsp:6:playback"
		port.group = "playback"
		priority.driver = "1000"
		priority.session = "1000"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "58"
		object.serial = "1409"
		node.max-latency = "4096/48000"
		api.alsa.period-size = "1024"
		api.alsa.period-num = "8"
		api.alsa.headroom = "0"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:00:1f.3-platform-skl_hda_dsp_generic"
		device.enum.api = "udev"
		device.name = "alsa_card.pci-0000_00_1f.3-platform-skl_hda_dsp_generic"
		device.nick = "sof-hda-dsp"
		device.plugged.usec = "3345635"
		device.product.id = "0x51c8"
		device.product.name = "Alder Lake PCH-P High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0"
		device.vendor.id = "0x8086"
		device.vendor.name = "Intel Corporation"
		spa.object.id = "2"
		device.string = "0"
	Ports:
		[Out] Headphones: Headphones (type: Headphones, priority: 200, availability group: Headphone, available)
	Active Port: [Out] Headphones
	Formats:
		pcm

Arch Linux

#1 2025-05-04 16:10:29

pipewire does not work on i3.

#2 2025-05-04 16:17:39

Re: pipewire does not work on i3.

#3 2025-05-07 01:43:13

Re: pipewire does not work on i3.

Board footer