You are not logged in.

Pages: 1

#1 2025-05-20 06:02:22

Daitama
Member
Registered: 2016-12-06
Posts: 3

[SOLVED] No Sound From Games On Valve Index(ALSA,Pipewire,Wireplumber)

Hello, I'm struggling to figure out why I'm not able to get any sound from my Valve Index when playing VR games. I'm not sure if it's relevant, but most of the profiles in pavucontrol show (unplugged) (unavailable) next to their name, and no matter which one I pick, I don't get any sound from the headset. I was able to get some sound by using aplay -L to get the PCM device name and then running speaker-test -Dhdmi:CARD=HDMI,DEV=2 -fdat -c2. I was able to hear static alternating between the speakers, so the hardware seems to be working, but I'm having a difficult time figuring out where the disconnect is. If it helps, I've included the output of aplay -L and lspci -k below. Any suggestions or advice are greatly appreciated.

aplay -L

null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pipewire
    PipeWire Sound Server
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PipeWire Media Server)
hdmi:CARD=HDMI,DEV=0
    HDA ATI HDMI, ASUS XG438
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
    HDA ATI HDMI, HDMI 1
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
    HDA ATI HDMI, Index HMD
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
    HDA ATI HDMI, HP E24mv G4
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
    HDA ATI HDMI, HDMI 4
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=5
    HDA ATI HDMI, HDMI 5
    HDMI Audio Output
usbstream:CARD=HDMI
    HDA ATI HDMI
    USB Stream Output
sysdefault:CARD=Controller
    DualSense Wireless Controller, USB Audio
    Default Audio Device
front:CARD=Controller,DEV=0
    DualSense Wireless Controller, USB Audio
    Front output / input
surround21:CARD=Controller,DEV=0
    DualSense Wireless Controller, USB Audio
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Controller,DEV=0
    DualSense Wireless Controller, USB Audio
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Controller,DEV=0
    DualSense Wireless Controller, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Controller,DEV=0
    DualSense Wireless Controller, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Controller,DEV=0
    DualSense Wireless Controller, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Controller,DEV=0
    DualSense Wireless Controller, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Controller,DEV=0
    DualSense Wireless Controller, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=Controller
    DualSense Wireless Controller
    USB Stream Output
sysdefault:CARD=Generic
    HD-Audio Generic, ALC1220 Analog
    Default Audio Device
front:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    Front output / input
surround21:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Digital
    IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=Generic
    HD-Audio Generic
    USB Stream Output
sysdefault:CARD=Wireless
    Arctis Pro Wireless, USB Audio
    Default Audio Device
front:CARD=Wireless,DEV=0
    Arctis Pro Wireless, USB Audio
    Front output / input
surround21:CARD=Wireless,DEV=0
    Arctis Pro Wireless, USB Audio
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Wireless,DEV=0
    Arctis Pro Wireless, USB Audio
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Wireless,DEV=0
    Arctis Pro Wireless, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Wireless,DEV=0
    Arctis Pro Wireless, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Wireless,DEV=0
    Arctis Pro Wireless, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Wireless,DEV=0
    Arctis Pro Wireless, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Wireless,DEV=0
    Arctis Pro Wireless, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
iec958:CARD=Wireless,DEV=1
    Arctis Pro Wireless, USB Audio #1
    IEC958 (S/PDIF) Digital Audio Output
usbstream:CARD=Wireless
    Arctis Pro Wireless
    USB Stream Output
usbstream:CARD=Mic
    Valve VR Radio & HMD Mic
    USB Stream Output

lspci -k

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Root Complex
	Subsystem: ASUSTeK Computer Inc. Device 8808
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Starship/Matisse IOMMU
	Subsystem: ASUSTeK Computer Inc. Device 8808
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
	DeviceName:  Onboard IGD
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
00:03.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
00:03.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:05.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:07.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:07.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B]
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B]
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 61)
	Subsystem: ASUSTeK Computer Inc. Device 87c0
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
	Subsystem: ASUSTeK Computer Inc. Device 87c0
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 3
	Kernel driver in use: k10temp
	Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse/Vermeer Data Fabric: Device 18h; Function 7
01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983
	Subsystem: Samsung Electronics Co Ltd SSD 970 EVO/PRO
	Kernel driver in use: nvme
	Kernel modules: nvme
02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse Switch Upstream
	Kernel driver in use: pcieport
03:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
03:03.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
03:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
03:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
03:08.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
03:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
03:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: pcieport
04:00.0 Non-Volatile memory controller: Phison Electronics Corporation E18 PCIe4 NVMe Controller (rev 01)
	Subsystem: Phison Electronics Corporation E18 PCIe4 NVMe Controller
	Kernel driver in use: nvme
	Kernel modules: nvme
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)
	Subsystem: ASUSTeK Computer Inc. Device 87d7
	Kernel driver in use: r8169
	Kernel modules: r8169
06:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)
	Subsystem: ASUSTeK Computer Inc. Device 85f0
	Kernel driver in use: igb
	Kernel modules: igb
07:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a)
	Subsystem: Intel Corporation Wi-Fi 6 AX200NGW
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi
08:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP
	Subsystem: ASUSTeK Computer Inc. Device 8808
08:00.1 USB controller: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: xhci_hcd
08:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller
	Subsystem: Advanced Micro Devices, Inc. [AMD] Device 148c
	Kernel driver in use: xhci_hcd
09:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51)
	Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
	Kernel driver in use: ahci
0a:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51)
	Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
	Kernel driver in use: ahci
0b:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Upstream Port of PCI Express Switch (rev c0)
	Kernel driver in use: pcieport
0c:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch
	Kernel driver in use: pcieport
0d:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] (rev c0)
	Subsystem: XFX Limited Speedster MERC 319 AMD Radeon RX 6900 XT Black
	Kernel driver in use: amdgpu
	Kernel modules: amdgpu
0d:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
0d:00.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 73a6
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 73a6
	Kernel driver in use: xhci_hcd
0d:00.3 Serial bus controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 USB
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0408
	Kernel driver in use: i2c-designware-pci
0e:00.0 Non-Volatile memory controller: Sandisk Corp SN8000S NVMe SSD (rev 01)
	Subsystem: Sandisk Corp SN8000S NVMe SSD
	Kernel driver in use: nvme
	Kernel modules: nvme
0f:00.0 Non-Volatile memory controller: Sandisk Corp SN8000S NVMe SSD (rev 01)
	Subsystem: Sandisk Corp SN8000S NVMe SSD
	Kernel driver in use: nvme
	Kernel modules: nvme
10:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Function
	Subsystem: ASUSTeK Computer Inc. Device 8808
11:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP
	Subsystem: ASUSTeK Computer Inc. Device 8808
11:00.1 Encryption controller: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Cryptographic Coprocessor PSPCPP
	Subsystem: ASUSTeK Computer Inc. Device 8808
	Kernel driver in use: ccp
	Kernel modules: ccp
11:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller
	Subsystem: ASUSTeK Computer Inc. Device 87c0
	Kernel driver in use: xhci_hcd
11:00.4 Audio device: Advanced Micro Devices, Inc. [AMD] Starship/Matisse HD Audio Controller
	Subsystem: ASUSTeK Computer Inc. Device 87c4
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

Last edited by Daitama (2025-05-21 05:46:06)

Offline

#2 2025-05-20 07:53:04

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,443

Re: [SOLVED] No Sound From Games On Valve Index(ALSA,Pipewire,Wireplumber)

What do you get from 

pactl list cards
pactl list sinks

Offline

#3 2025-05-20 14:19:17

Daitama
Member
Registered: 2016-12-06
Posts: 3

Re: [SOLVED] No Sound From Games On Valve Index(ALSA,Pipewire,Wireplumber)

V1del wrote:

What do you get from 

pactl list cards
pactl list sinks

pactl list cards

Card #52
	Name: alsa_card.usb-Sony_Interactive_Entertainment_DualSense_Wireless_Controller-00
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "2"
		api.alsa.card.longname = "Sony Interactive Entertainment DualSense Wireless Controller at usb-0000:08:00."
		api.alsa.card.name = "DualSense Wireless Controller"
		api.alsa.path = "hw:2"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "usb"
		device.bus-id = "usb-Sony_Interactive_Entertainment_DualSense_Wireless_Controller-00"
		device.bus_path = "pci-0000:08:00.3-usb-0:1:1.0"
		device.description = "DualSense wireless controller (PS5)"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-usb"
		device.name = "alsa_card.usb-Sony_Interactive_Entertainment_DualSense_Wireless_Controller-00"
		device.nick = "DualSense Wireless Controller"
		device.plugged.usec = "6945373"
		device.product.id = "0x0ce6"
		device.product.name = "DualSense wireless controller (PS5)"
		device.serial = "Sony_Interactive_Entertainment_DualSense_Wireless_Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:08:00.3/usb3/3-1/3-1:1.0/sound/card2"
		device.vendor.id = "0x054c"
		device.vendor.name = "Sony Corp."
		media.class = "Audio/Device"
		spa.object.id = "6"
		factory.id = "15"
		client.id = "50"
		object.id = "52"
		object.serial = "52"
		object.path = "alsa:acp:Controller"
		alsa.card = "2"
		alsa.card_name = "DualSense Wireless Controller"
		alsa.long_card_name = "Sony Interactive Entertainment DualSense Wireless Controller at usb-0000:08:00."
		alsa.driver_name = "snd_usb_audio"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB054c:0ce6"
		alsa.id = "Controller"
		device.string = "2"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: yes)
		output:analog-surround-40+input:iec958-stereo: Analog Surround 4.0 Output + Digital Stereo (IEC958) Input (sinks: 1, sources: 1, priority: 1255, available: yes)
		output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: yes)
		input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
		input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
		pro-audio: Pro Audio (sinks: 1, sources: 1, priority: 1, available: yes)
	Active Profile: off
	Ports:
		analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "headset"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo, output:analog-surround-40+input:analog-stereo
		iec958-stereo-input: Digital Input (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "spdif"
				card.profile.port = "1"
			Part of profile(s): input:iec958-stereo, output:analog-surround-40+input:iec958-stereo
		analog-output: Analog Output (type: Analog, priority: 9900, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "analog"
				card.profile.port = "2"
			Part of profile(s): output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-40+input:iec958-stereo

Card #53
	Name: alsa_card.usb-SteelSeries_Arctis_Pro_Wireless-00
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "4"
		api.alsa.card.longname = "SteelSeries Arctis Pro Wireless at usb-0000:08:00.3-2.2.1.3, full speed"
		api.alsa.card.name = "Arctis Pro Wireless"
		api.alsa.path = "hw:4"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio4"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "usb"
		device.bus-id = "usb-SteelSeries_Arctis_Pro_Wireless-00"
		device.bus_path = "pci-0000:08:00.3-usb-0:2.2.1.3:1.0"
		device.description = "Arctis Pro Wireless"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-usb"
		device.name = "alsa_card.usb-SteelSeries_Arctis_Pro_Wireless-00"
		device.nick = "Arctis Pro Wireless"
		device.plugged.usec = "7492743"
		device.product.id = "0x1294"
		device.product.name = "Arctis Pro Wireless"
		device.profile-set = "usb-gaming-headset.conf"
		device.serial = "SteelSeries_Arctis_Pro_Wireless"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:08:00.3/usb3/3-2/3-2.2/3-2.2.1/3-2.2.1.3/3-2.2.1.3:1.0/sound/card4"
		device.vendor.id = "0x1038"
		device.vendor.name = "SteelSeries ApS"
		media.class = "Audio/Device"
		spa.object.id = "10"
		factory.id = "15"
		client.id = "50"
		object.id = "53"
		object.serial = "53"
		object.path = "alsa:acp:Wireless"
		alsa.card = "4"
		alsa.card_name = "Arctis Pro Wireless"
		alsa.long_card_name = "SteelSeries Arctis Pro Wireless at usb-0000:08:00.3-2.2.1.3, full speed"
		alsa.driver_name = "snd_usb_audio"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB1038:1294"
		alsa.id = "Wireless"
		device.string = "4"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:mono-chat+output:stereo-game+input:mono-chat: Chat Output + Game Output + Chat Input (sinks: 2, sources: 1, priority: 5100, available: yes)
		output:stereo-game: Game Output (sinks: 1, sources: 0, priority: 5000, available: yes)
		output:stereo-game+input:mono-chat: Game Output + Chat Input (sinks: 1, sources: 1, priority: 5000, available: yes)
		pro-audio: Pro Audio (sinks: 2, sources: 1, priority: 1, available: yes)
		input:mono-chat: Chat Input (sinks: 0, sources: 1, priority: 1, available: yes)
		output:mono-chat: Chat Output (sinks: 1, sources: 0, priority: 1, available: yes)
		output:mono-chat+input:mono-chat: Chat Output + Chat Input (sinks: 1, sources: 1, priority: 1, available: yes)
	Active Profile: output:mono-chat+output:stereo-game+input:mono-chat
	Ports:
		usb-gaming-headset-output-mono: Headphones Mono Output (type: Headphones, priority: 0, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "headphones"
				card.profile.port = "0"
			Part of profile(s): output:mono-chat+output:stereo-game+input:mono-chat, output:mono-chat, output:mono-chat+input:mono-chat
		usb-gaming-headset-output-stereo: Headphones (type: Headphones, priority: 0, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "headphones"
				card.profile.port = "1"
			Part of profile(s): output:mono-chat+output:stereo-game+input:mono-chat, output:stereo-game, output:stereo-game+input:mono-chat
		usb-gaming-headset-input: Headset Microphone (type: Headset, priority: 0, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "headset"
				card.profile.port = "2"
			Part of profile(s): output:mono-chat+output:stereo-game+input:mono-chat, input:mono-chat, output:mono-chat+input:mono-chat, output:stereo-game+input:mono-chat

Card #54
	Name: alsa_card.pci-0000_0d_00.1
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.card.longname = "HDA ATI HDMI at 0xfc824000 irq 225"
		api.alsa.card.name = "HDA ATI HDMI"
		api.alsa.path = "hw:0"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:0d:00.1"
		device.description = "Navi 21/23 HDMI/DP Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_0d_00.1"
		device.nick = "HDA ATI HDMI"
		device.plugged.usec = "6841220"
		device.product.id = "0xab28"
		device.product.name = "Navi 21/23 HDMI/DP Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:0b:00.0/0000:0c:00.0/0000:0d:00.1/sound/card0"
		device.vendor.id = "0x1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		media.class = "Audio/Device"
		spa.object.id = "2"
		factory.id = "15"
		client.id = "50"
		object.id = "54"
		object.serial = "54"
		object.path = "alsa:acp:HDMI"
		alsa.card = "0"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xfc824000 irq 225"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "ATI R6xx HDMI"
		alsa.components = "HDA:1002aa01,00aa0100,00100800"
		alsa.id = "HDMI"
		device.string = "0"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: yes)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: yes)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra5: Digital Stereo (HDMI 6) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra5: Digital Surround 5.1 (HDMI 6) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra5: Digital Surround 7.1 (HDMI 6) Output (sinks: 1, sources: 0, priority: 600, available: no)
		pro-audio: Pro Audio (sinks: 6, sources: 0, priority: 1, available: yes)
	Active Profile: off
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 1"
				device.icon_name = "video-display"
				card.profile.port = "0"
				device.product.name = "ASUS XG438"
				iec958.codecs.detected = "[\"PCM\"]"
			Part of profile(s): output:hdmi-stereo
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 2"
				device.icon_name = "video-display"
				card.profile.port = "1"
			Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 3"
				device.icon_name = "video-display"
				card.profile.port = "2"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 4"
				device.icon_name = "video-display"
				card.profile.port = "3"
				device.product.name = "HP E24mv G4"
				iec958.codecs.detected = "[\"PCM\"]"
			Part of profile(s): output:hdmi-stereo-extra3
		hdmi-output-4: HDMI / DisplayPort 5 (type: HDMI, priority: 5500, latency offset: 0 usec, availability group: Legacy 5, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 5"
				device.icon_name = "video-display"
				card.profile.port = "4"
			Part of profile(s): output:hdmi-stereo-extra4, output:hdmi-surround-extra4, output:hdmi-surround71-extra4
		hdmi-output-5: HDMI / DisplayPort 6 (type: HDMI, priority: 5400, latency offset: 0 usec, availability group: Legacy 6, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 6"
				device.icon_name = "video-display"
				card.profile.port = "5"
			Part of profile(s): output:hdmi-stereo-extra5, output:hdmi-surround-extra5, output:hdmi-surround71-extra5

Card #55
	Name: alsa_card.usb-Valve_Corporation_Valve_VR_Radio___HMD_Mic_0A6E27D1CF-LYM-01
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "3"
		api.alsa.card.longname = "Valve Corporation Valve VR Radio & HMD Mic at usb-0000:11:00.3-3.3.3, full spee"
		api.alsa.card.name = "Valve VR Radio & HMD Mic"
		api.alsa.path = "hw:3"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio3"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "usb"
		device.bus-id = "usb-Valve_Corporation_Valve_VR_Radio___HMD_Mic_0A6E27D1CF-LYM-01"
		device.bus_path = "pci-0000:11:00.3-usb-0:3.3.3:1.1"
		device.description = "Valve VR Radio & HMD Mic"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-usb"
		device.name = "alsa_card.usb-Valve_Corporation_Valve_VR_Radio___HMD_Mic_0A6E27D1CF-LYM-01"
		device.nick = "Valve VR Radio & HMD Mic"
		device.plugged.usec = "7007782"
		device.product.id = "0x2102"
		device.product.name = "Valve VR Radio & HMD Mic"
		device.serial = "Valve_Corporation_Valve_VR_Radio___HMD_Mic_0A6E27D1CF-LYM"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:11:00.3/usb7/7-3/7-3.3/7-3.3.3/7-3.3.3:1.1/sound/card3"
		device.vendor.id = "0x28de"
		device.vendor.name = "Valve Software"
		media.class = "Audio/Device"
		spa.object.id = "8"
		factory.id = "15"
		client.id = "50"
		object.id = "55"
		object.serial = "55"
		object.path = "alsa:acp:Mic"
		alsa.card = "3"
		alsa.card_name = "Valve VR Radio & HMD Mic"
		alsa.long_card_name = "Valve Corporation Valve VR Radio & HMD Mic at usb-0000:11:00.3-3.3.3, full spee"
		alsa.driver_name = "snd_usb_audio"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB28de:2102"
		alsa.id = "Mic"
		device.string = "3"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		pro-audio: Pro Audio (sinks: 0, sources: 1, priority: 1, available: yes)
		input:mono-fallback: Mono Input (sinks: 0, sources: 1, priority: 1, available: yes)
	Active Profile: pro-audio
	Ports:
		analog-input: Analog Input (type: Analog, priority: 10000, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "analog"
				card.profile.port = "0"
			Part of profile(s): input:mono-fallback

Card #56
	Name: alsa_card.pci-0000_11_00.4
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "1"
		api.alsa.card.longname = "HD-Audio Generic at 0xfcc00000 irq 226"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:1"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:11:00.4"
		device.description = "Starship/Matisse HD Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_11_00.4"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "6862577"
		device.product.id = "0x1487"
		device.product.name = "Starship/Matisse HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:11:00.4/sound/card1"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		media.class = "Audio/Device"
		spa.object.id = "4"
		factory.id = "15"
		client.id = "50"
		object.id = "56"
		object.serial = "56"
		object.path = "alsa:acp:Generic"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfcc00000 irq 226"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Realtek ALC1220"
		alsa.components = "HDA:10ec1220,104387c4,00100101"
		alsa.id = "Generic"
		device.string = "1"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no)
		output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: no)
		output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
		output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
		output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
		output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
		output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
		output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
		output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
		output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
		output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
		output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
		output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
		output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
		output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: no)
		output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
		input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
		pro-audio: Pro Audio (sinks: 2, sources: 2, priority: 1, available: yes)
	Active Profile: output:iec958-stereo+input:analog-stereo
	Ports:
		analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, not available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 1"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 2"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "1"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "line"
				port.availability-group = "Legacy 3"
				card.profile.port = "2"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, not available)
			Properties:
				port.type = "line"
				port.availability-group = "Legacy 4"
				card.profile.port = "3"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, not available)
			Properties:
				port.type = "headphones"
				port.availability-group = "Legacy 5"
				device.icon_name = "audio-headphones"
				card.profile.port = "4"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "spdif"
				card.profile.port = "5"
			Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo

pactl list sinks

Sink #63
	State: SUSPENDED
	Name: alsa_output.usb-SteelSeries_Arctis_Pro_Wireless-00.mono-chat
	Description: Arctis Pro Wireless Chat
	Driver: PipeWire
	Sample Specification: s16le 1ch 48000Hz
	Channel Map: mono
	Owner Module: 4294967295
	Mute: no
	Volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.usb-SteelSeries_Arctis_Pro_Wireless-00.mono-chat.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "4"
		alsa.card_name = "Arctis Pro Wireless"
		alsa.class = "generic"
		alsa.components = "USB1038:1294"
		alsa.device = "0"
		alsa.driver_name = "snd_usb_audio"
		alsa.id = "USB Audio"
		alsa.long_card_name = "SteelSeries Arctis Pro Wireless at usb-0000:08:00.3-2.2.1.3, full speed"
		alsa.mixer_name = "USB Mixer"
		alsa.name = "USB Audio"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "SteelSeries Arctis Pro Wireless at usb-0000:08:00.3-2.2.1.3, full speed"
		api.alsa.card.name = "Arctis Pro Wireless"
		api.alsa.path = "hw:4,0,0"
		api.alsa.pcm.card = "4"
		api.alsa.pcm.stream = "playback"
		audio.channels = "1"
		audio.position = "MONO"
		card.profile.device = "0"
		device.api = "alsa"
		device.class = "sound"
		device.icon_name = "audio-card-analog"
		device.id = "53"
		device.intended_roles = "phone"
		device.profile.description = "Chat"
		device.profile.name = "mono-chat"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Arctis Pro Wireless"
		node.name = "alsa_output.usb-SteelSeries_Arctis_Pro_Wireless-00.mono-chat"
		node.nick = "Arctis Pro Wireless"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Wireless:0:playback"
		port.group = "playback"
		priority.driver = "1000"
		priority.session = "1000"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "50"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "63"
		object.serial = "63"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "4"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio4"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "usb"
		device.bus-id = "usb-SteelSeries_Arctis_Pro_Wireless-00"
		device.bus_path = "pci-0000:08:00.3-usb-0:2.2.1.3:1.0"
		device.enum.api = "udev"
		device.name = "alsa_card.usb-SteelSeries_Arctis_Pro_Wireless-00"
		device.nick = "Arctis Pro Wireless"
		device.plugged.usec = "7492743"
		device.product.id = "0x1294"
		device.product.name = "Arctis Pro Wireless"
		device.profile-set = "usb-gaming-headset.conf"
		device.serial = "SteelSeries_Arctis_Pro_Wireless"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:08:00.3/usb3/3-2/3-2.2/3-2.2.1/3-2.2.1.3/3-2.2.1.3:1.0/sound/card4"
		device.vendor.id = "0x1038"
		device.vendor.name = "SteelSeries ApS"
		spa.object.id = "10"
		device.string = "4"
	Ports:
		usb-gaming-headset-output-mono: Headphones Mono Output (type: Headphones, priority: 0, availability unknown)
	Active Port: usb-gaming-headset-output-mono
	Formats:
		pcm

Sink #64
	State: SUSPENDED
	Name: alsa_output.usb-SteelSeries_Arctis_Pro_Wireless-00.stereo-game
	Description: Arctis Pro Wireless Game
	Driver: PipeWire
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.usb-SteelSeries_Arctis_Pro_Wireless-00.stereo-game.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "4"
		alsa.card_name = "Arctis Pro Wireless"
		alsa.class = "generic"
		alsa.components = "USB1038:1294"
		alsa.device = "1"
		alsa.driver_name = "snd_usb_audio"
		alsa.id = "USB Audio"
		alsa.long_card_name = "SteelSeries Arctis Pro Wireless at usb-0000:08:00.3-2.2.1.3, full speed"
		alsa.mixer_name = "USB Mixer"
		alsa.name = "USB Audio #1"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "SteelSeries Arctis Pro Wireless at usb-0000:08:00.3-2.2.1.3, full speed"
		api.alsa.card.name = "Arctis Pro Wireless"
		api.alsa.path = "hw:4,1,0"
		api.alsa.pcm.card = "4"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "1"
		device.api = "alsa"
		device.class = "sound"
		device.icon_name = "audio-card-analog"
		device.id = "53"
		device.profile.description = "Game"
		device.profile.name = "stereo-game"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Arctis Pro Wireless"
		node.name = "alsa_output.usb-SteelSeries_Arctis_Pro_Wireless-00.stereo-game"
		node.nick = "USB Audio #1"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Wireless:1:playback"
		port.group = "playback"
		priority.driver = "728"
		priority.session = "728"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "50"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "64"
		object.serial = "64"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "4"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio4"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "usb"
		device.bus-id = "usb-SteelSeries_Arctis_Pro_Wireless-00"
		device.bus_path = "pci-0000:08:00.3-usb-0:2.2.1.3:1.0"
		device.enum.api = "udev"
		device.name = "alsa_card.usb-SteelSeries_Arctis_Pro_Wireless-00"
		device.nick = "Arctis Pro Wireless"
		device.plugged.usec = "7492743"
		device.product.id = "0x1294"
		device.product.name = "Arctis Pro Wireless"
		device.profile-set = "usb-gaming-headset.conf"
		device.serial = "SteelSeries_Arctis_Pro_Wireless"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:08:00.3/usb3/3-2/3-2.2/3-2.2.1/3-2.2.1.3/3-2.2.1.3:1.0/sound/card4"
		device.vendor.id = "0x1038"
		device.vendor.name = "SteelSeries ApS"
		spa.object.id = "10"
		device.string = "4"
	Ports:
		usb-gaming-headset-output-stereo: Headphones (type: Headphones, priority: 0, availability unknown)
	Active Port: usb-gaming-headset-output-stereo
	Formats:
		pcm

Sink #70
	State: SUSPENDED
	Name: alsa_output.pci-0000_11_00.4.iec958-stereo
	Description: Starship/Matisse HD Audio Controller Digital Stereo (IEC958)
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65864 / 101% / 0.13 dB,   front-right: 65864 / 101% / 0.13 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor Source: alsa_output.pci-0000_11_00.4.iec958-stereo.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY SET_FORMATS 
	Properties:
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.components = "HDA:10ec1220,104387c4,00100101"
		alsa.device = "1"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "ALC1220 Digital"
		alsa.long_card_name = "HD-Audio Generic at 0xfcc00000 irq 226"
		alsa.mixer_name = "Realtek ALC1220"
		alsa.name = "ALC1220 Digital"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HD-Audio Generic at 0xfcc00000 irq 226"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "iec958:1"
		api.alsa.pcm.card = "1"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "11"
		device.api = "alsa"
		device.class = "sound"
		device.icon_name = "audio-card-analog"
		device.id = "56"
		device.profile.description = "Digital Stereo (IEC958)"
		device.profile.name = "iec958-stereo"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Starship/Matisse HD Audio Controller"
		node.name = "alsa_output.pci-0000_11_00.4.iec958-stereo"
		node.nick = "ALC1220 Digital"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Generic:11:playback"
		port.group = "playback"
		priority.driver = "736"
		priority.session = "736"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "50"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "47"
		object.serial = "70"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "1"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:11:00.4"
		device.enum.api = "udev"
		device.name = "alsa_card.pci-0000_11_00.4"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "6862577"
		device.product.id = "0x1487"
		device.product.name = "Starship/Matisse HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:11:00.4/sound/card1"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		spa.object.id = "4"
		device.string = "1"
	Ports:
		iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, availability unknown)
	Active Port: iec958-stereo-output
	Formats:
		pcm

Offline

#4 2025-05-20 14:46:27

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,443

Re: [SOLVED] No Sound From Games On Valve Index(ALSA,Pipewire,Wireplumber)

Logically speaking if we map from the normal HDMI PCIs it "should" be device 2 so 

pactl set-card-profile alsa_card.pci-0000_0d_00.1 output:hdmi-stereo-extra2

if the sink you get from that doesn't work try extra3, or alternatively the corresponding matching digital ones. Maybe throw in aplay -l so we see the actual cards that should be exposed

Last edited by V1del (2025-05-20 15:10:13)

Offline

#5 2025-05-21 05:42:51

Daitama
Member
Registered: 2016-12-06
Posts: 3

Re: [SOLVED] No Sound From Games On Valve Index(ALSA,Pipewire,Wireplumber)

V1del wrote:

Logically speaking if we map from the normal HDMI PCIs it "should" be device 2

Well, that's embarrassing. You're absolutely right. I'm not sure how I got it in my head that the card I needed to be working with was alsa_card.pci-0000_11_00.4 - "Starship/Matisse HD Audio Controller", but apparently that wasn't it. I had only been trying and failing to find a profile that worked with that card. After trying profiles on the correct card, alsa_card.pci-0000_0d_00.1 - "Navi 21/23 HDMI/DP Audio Controller", I finally found one that routed audio through my Index speakers. Thank you so much for your help. I'm sorry that it ended up being something kind of silly.

Offline

Pages: 1

Board footer

Powered by FluxBB