Arch Linux

phoenix324

Member

Registered: 2023-08-23

Posts: 106

(Input/output error) No valid Btrfs found on /dev/nvme0n1p3

Suddenly got 'Input/output error' in terminal in running system and opened programs started closing themselves. Did  REISUB and tried booting but didn't work.

Currently in Fedora live system and these are the following logs --

Edit - The below error no longer valid as thry dont appear when using archiso. I used fedora iso for GUI. I  on Archlinux

liveuser@localhost-live:~$ lsblk
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
loop0         7:0    0   2.4G  1 loop /run/rootfsbase
sda           8:0    0 931.5G  0 disk 
└─sda1        8:1    0 931.5G  0 part 
sdb           8:16   1  57.3G  0 disk 
├─sdb1        8:17   1  57.3G  0 part 
└─sdb2        8:18   1    32M  0 part 
zram0       251:0    0     8G  0 disk [SWAP]
nvme0n1     259:0    0     0B  0 disk 
├─nvme0n1p1 259:1    0   1.5G  0 part 
├─nvme0n1p2 259:2    0    12G  0 part 
├─nvme0n1p3 259:3    0 451.4G  0 part 
└─nvme0n1p4 259:4    0    12G  0 part 

liveuser@localhost-live:~$ sudo btrfs check /dev/nvme0n1p3
Opening filesystem to check...
No valid Btrfs found on /dev/nvme0n1p3
ERROR: cannot open file system

liveuser@localhost-live:~$ sudo nvme list
Node                  Generic               SN                   Model                                    Namespace  Usage                      Format           FW Rev  
--------------------- --------------------- -------------------- ---------------------------------------- ---------- -------------------------- ---------------- --------

liveuser@localhost-live:~$ sudo file -s /dev/nvme0n1p1
/dev/nvme0n1p1: ERROR: cannot read `/dev/nvme0n1p1' (Input/output error)
liveuser@localhost-live:~$ sudo file -s /dev/nvme0n1p2
/dev/nvme0n1p2: ERROR: cannot read `/dev/nvme0n1p2' (Input/output error)
liveuser@localhost-live:~$ sudo file -s /dev/nvme0n1p3
/dev/nvme0n1p3: ERROR: cannot read `/dev/nvme0n1p3' (Input/output error)
liveuser@localhost-live:~$ sudo file -s /dev/nvme0n1p4
/dev/nvme0n1p4: ERROR: cannot read `/dev/nvme0n1p4' (Input/output error)

liveuser@localhost-live:~$ sudo dmesg | grep -i nvme
[    5.386700] nvme nvme0: pci function 0000:02:00.0
[    5.390953] nvme nvme0: missing or invalid SUBNQN field.
[    5.391103] nvme nvme0: D3 entry latency set to 10 seconds
[    5.392877] nvme nvme0: 8/0/0 default/read/poll queues
[    5.394483]  nvme0n1: p1 p2 p3 p4
[   71.300847] nvme nvme0: I/O tag 576 (5240) opcode 0x2 (I/O Cmd) QID 1 timeout, aborting req_op:READ(0) size:131072
[   71.300883] nvme nvme0: I/O tag 577 (6241) opcode 0x2 (I/O Cmd) QID 1 timeout, aborting req_op:READ(0) size:131072
[   71.300902] nvme nvme0: I/O tag 578 (1242) opcode 0x2 (I/O Cmd) QID 1 timeout, aborting req_op:READ(0) size:131072
[   71.300918] nvme nvme0: I/O tag 579 (1243) opcode 0x2 (I/O Cmd) QID 1 timeout, aborting req_op:READ(0) size:131072
[  101.508832] nvme nvme0: I/O tag 576 (5240) opcode 0x2 (I/O Cmd) QID 1 timeout, reset controller
[  194.988851] nvme nvme0: Device not ready; aborting reset, CSTS=0x1
[  194.999466] nvme0n1: I/O Cmd(0x2) @ LBA 1000215040, 8 blocks, I/O Error (sct 0x3 / sc 0x71) 
[  194.999486] I/O error, dev nvme0n1, sector 1000215040 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[  194.999568] nvme nvme0: Abort status: 0x371
[  194.999577] nvme nvme0: Abort status: 0x371
[  194.999583] nvme nvme0: Abort status: 0x371
[  194.999588] nvme nvme0: Abort status: 0x371
[  225.006854] nvme nvme0: Device not ready; aborting reset, CSTS=0x1
[  225.007185] nvme nvme0: Disabling device after reset failure: -19
[  225.016983] Buffer I/O error on dev nvme0n1, logical block 125026880, async page read
[  225.026483] Buffer I/O error on dev nvme0n1p4, logical block 3145712, async page read
[  225.026511] Buffer I/O error on dev nvme0n1p3, logical block 118341872, async page read
[  225.026962] Buffer I/O error on dev nvme0n1p2, logical block 3145712, async page read
[  225.026988] Buffer I/O error on dev nvme0n1p1, logical block 393200, async page read
[  226.117247] nvme nvme0: using unchecked data buffer
[  226.121578] nvme nvme0: Identify namespace failed (-5)
[  424.083719] Buffer I/O error on dev nvme0n1p3, logical block 16, async page read
[  424.084019] Buffer I/O error on dev nvme0n1p3, logical block 16, async page read
[  440.005764] Buffer I/O error on dev nvme0n1p3, logical block 16, async page read
[  440.005986] Buffer I/O error on dev nvme0n1p3, logical block 16, async page read
[  869.353923] Buffer I/O error on dev nvme0n1p3, logical block 118341872, async page read
[  878.081707] Buffer I/O error on dev nvme0n1p3, logical block 0, async page read
[  891.243062] Buffer I/O error on dev nvme0n1p1, logical block 0, async page read
[  892.947122] Buffer I/O error on dev nvme0n1p2, logical block 0, async page read
[  895.416075] Buffer I/O error on dev nvme0n1p3, logical block 0, async page read
[  896.770930] Buffer I/O error on dev nvme0n1p4, logical block 0, async page read

Last edited by phoenix324 (2025-05-24 09:17:27)

gromit

Administrator

From: Germany

Registered: 2024-02-10

Posts: 1,523

Website

Re: (Input/output error) No valid Btrfs found on /dev/nvme0n1p3

Did you already check the smart health of that device? Also is it an Arch Linux installation or how come that you're posting here?

phoenix324

Member

Registered: 2023-08-23

Posts: 106

Re: (Input/output error) No valid Btrfs found on /dev/nvme0n1p3

I booted latest archiso, and all the weird error from above is no longer happening.

But i am still confuse and will wait for reply on how should i proceed -

root@archiso #file -s /dev/nume0n1p1

/dev/nume0n1p1: DOS/MBR boot sector, code offset 0x58+2, OEM-ID "mkfs.fat", sectors/cluster ........

root@archiso # sudo btrfs check /dev/nume0n1p3

Opening filesystem to check...

Checking filesystem on /dev/nume0n1p3

UUID: ff5d4ba3-25ce-46cd-9bab-dc98091801b1

[1/8] checking log skipped (none written)

[2/8] checking root items

[3/8] checking extents

[4/8] checking free space tree

[5/8] checking fs roots

6/8] checking only csums items (without verifying data)

[ [7/8] checking root refs

[8/8] checking quota groups skipped (not enabled on this FS)

found 324876607488 bytes used, no error found

total csun bytes: 284415620

total tree bytes: 3600302080

total fs tree bytes: 3032760320

total extent tree bytes: 209584128

btree space waste bytes: 667120509

file data blocks allocated: 353323298816

referenced 383413792768

The above ouput was extracted through google lens. Let me know if there's better way.

For now i will chroot and try the maintainance guide from archwiki

Last edited by phoenix324 (2025-05-24 09:15:09)

phoenix324

Member

Registered: 2023-08-23

Posts: 106

Re: (Input/output error) No valid Btrfs found on /dev/nvme0n1p3

Did you already check the smart health of that device? Also is it an Arch Linux installation or how come that you're posting here?

Sorry for confusing you. I wanted something graphical for troubleshooting. I am on arch.

I will try checking the smart health.

Can you tell me a way to extract the output of commands while in archiso, so that i can paste them here if needed.

phoenix324

Member

Registered: 2023-08-23

Posts: 106

Re: (Input/output error) No valid Btrfs found on /dev/nvme0n1p3

root@archiso # smartctl -H/dev/nume0

smartctl 7.4 2023-08-01 5530 [x86_64-linux-6.14.4-arch1-21 (local build)

Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

Seems good, what should i do more to ensure nothing is wrong.

Why did the error happened in first place.

Should i try chroot ? But i dont remeber the options which i was mounting my btrfs partition. Any problem if miss some options ?

phoenix324

Member

Registered: 2023-08-23

Posts: 106

Re: (Input/output error) No valid Btrfs found on /dev/nvme0n1p3

Currently writing this message from my Arch system, everythings working. But then what was happening for last 3 hours. I can provide journal logs ? which flags would useful ? `journalctl --boot -1 --reverse` --priority <which-one?>`

phoenix324

Member

Registered: 2023-08-23

Posts: 106

Re: (Input/output error) No valid Btrfs found on /dev/nvme0n1p3

[phoenix@ArchLinux ~]$ journalctl --boot -1 --reverse   --priority emerg
-- No entries --
[phoenix@ArchLinux ~]$ journalctl --boot -1 --reverse   --priority alert
-- No entries --
[phoenix@ArchLinux ~]$ journalctl --boot -1 --reverse   --priority crit
May 23 20:35:29 ArchLinux smartd[693]: Device: /dev/sda [SAT], 24 Offline uncorrectable sectors
May 23 20:35:29 ArchLinux smartd[693]: Device: /dev/sda [SAT], 24 Currently unreadable (pending) sectors
May 23 11:21:11 ArchLinux smartd[693]: Device: /dev/sda [SAT], 24 Offline uncorrectable sectors
May 23 11:21:11 ArchLinux smartd[693]: Device: /dev/sda [SAT], 24 Currently unreadable (pending) sectors
[phoenix@ArchLinux ~]$ journalctl --boot -1 --reverse   --priority debug  | rg nvme
May 24 11:18:55 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:18:55 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:18:20 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:18:20 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:17:46 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:17:46 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:17:10 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:17:10 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:16:37 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:16:37 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:16:03 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:16:03 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:15:28 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:15:28 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:14:53 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:14:53 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:14:19 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:14:19 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:13:44 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:13:44 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:13:10 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:13:10 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:12:35 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:12:35 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:12:00 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:12:00 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:11:25 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:11:25 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:10:51 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:10:51 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:10:16 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:10:16 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:09:42 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:09:42 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:09:07 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:09:07 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:08:32 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:08:32 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:07:57 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:07:57 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:07:23 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:07:23 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:06:48 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:06:48 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:06:13 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:06:13 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:05:34 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:05:34 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:05:02 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:05:02 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:04:27 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:04:27 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:03:53 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:03:53 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:03:19 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:03:19 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:02:44 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:02:44 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:02:09 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:02:09 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:01:35 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:01:35 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:01:00 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:01:00 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 11:00:25 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 11:00:25 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:59:51 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:59:51 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:59:16 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:59:16 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:58:41 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:58:41 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:58:07 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:58:07 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:57:32 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:57:32 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:56:57 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:56:57 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:56:23 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:56:23 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:55:48 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:55:48 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:55:13 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:55:13 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:54:39 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:54:39 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:54:04 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:54:04 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:53:29 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:53:29 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:52:55 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:52:55 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:52:21 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:52:21 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:51:46 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:51:46 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:51:11 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:51:11 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:50:37 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:50:37 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:50:02 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:50:02 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:49:27 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:49:27 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:48:53 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:48:53 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:48:18 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:48:18 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:47:43 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:47:43 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:47:09 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:47:09 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:46:34 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:46:34 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:45:59 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:45:59 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:45:25 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:45:25 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:44:50 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:44:50 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:44:15 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:44:15 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:43:41 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:43:41 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:43:04 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:43:04 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:42:31 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:42:31 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:41:57 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:41:57 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:41:23 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:41:23 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:40:48 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:40:48 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 10:40:13 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 10:40:13 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 24 09:36:10 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 24 09:36:10 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 23 20:13:04 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 23 20:13:04 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 23 19:18:06 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 23 19:18:06 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 23 18:54:45 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 23 18:54:45 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 23 13:34:06 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 23 13:34:06 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 23 12:25:37 ArchLinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 23 12:25:37 ArchLinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 23 11:21:10 ArchLinux smartd[693]: Device: /dev/nvme0, is SMART capable. Adding to "monitor" list.
May 23 11:21:10 ArchLinux kernel: nvme nvme0: using unchecked data buffer
May 23 11:21:10 ArchLinux smartd[693]: Device: /dev/nvme0, KINGSTON OM8PCP3512F-AI1, S/N:50026B7683ECE53F, FW:ECFK52.8, 512 GB
May 23 11:21:10 ArchLinux smartd[693]: Device: /dev/nvme0, opened
May 23 11:21:09 ArchLinux systemd-fsck[466]: /dev/nvme0n1p1: 391 files, 51180/392444 clusters
May 23 11:21:09 ArchLinux kernel: Adding 12582908k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:12582908k SS
May 23 11:21:08 ArchLinux kernel: BTRFS info (device nvme0n1p3 state M): use zstd compression, level 3
May 23 11:21:07 archlinux kernel: BTRFS info (device nvme0n1p3): using free-space-tree
May 23 11:21:07 archlinux kernel: BTRFS info (device nvme0n1p3): using crc32c (crc32c-x86) checksum algorithm
May 23 11:21:07 archlinux kernel: BTRFS info (device nvme0n1p3): first mount of filesystem ff5d4ba3-25ce-46cd-9bab-dc98091801b1
May 23 11:21:07 archlinux kernel: BTRFS: device fsid ff5d4ba3-25ce-46cd-9bab-dc98091801b1 devid 1 transid 657594 /dev/nvme0n1p3 (259:3) scanned by mount (232)
May 23 11:21:07 archlinux kernel:  nvme0n1: p1 p2 p3 p4
May 23 11:21:07 archlinux kernel: nvme nvme0: 8/0/0 default/read/poll queues
May 23 11:21:07 archlinux kernel: nvme nvme0: D3 entry latency set to 10 seconds
May 23 11:21:07 archlinux kernel: nvme nvme0: missing or invalid SUBNQN field.
May 23 11:21:07 archlinux kernel: nvme nvme0: pci function 0000:02:00.0

phoenix324

Member

Registered: 2023-08-23

Posts: 106

Re: (Input/output error) No valid Btrfs found on /dev/nvme0n1p3

weird now booting to fedor live iso also works perfectly.