You are not logged in.
Pages: 1
Hi all! I have pipewire, pipewire-pulse, and wireplumber all set up, and I am using discord (through the chromium browser) to test my audio. Fortunately, I am able to hear people in voice calls, but it seems like my microphone isn't exactly working. Chromium does in fact show that it recognized a microphone as I am able to mute and unmute myself within discord. The issue is that no one can hear me, and discord is showing a "cannot detect input form mic" warning. I have tried a few solutions such as installing sof-firmware and running commands I've seen while searching through past forum posts on this similar topic, but nothing has worked or made any impact. I'm not entirely sure which commands I should run to show the relevent information pertaining to this issue, so I'll just relay some outputs of command I've seen other forum users post.
I should also mention that I tried using discord through firefox and even discord installed from the arch repo, but the issue still stands.
Upon running
pactl list cardsI see
Card #47
Name: alsa_card.pci-0000_00_1f.3
Driver: alsa
Owner Module: n/a
Properties:
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.card.longname = "HDA Intel PCH at 0x6005238000 irq 156"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.path = "hw:0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.api = "alsa"
device.bus = "pci"
device.bus_path = "pci-0000:00:1f.3"
device.description = "Built-in Audio"
device.enum.api = "udev"
device.form_factor = "internal"
device.icon_name = "audio-card-analog-pci"
device.name = "alsa_card.pci-0000_00_1f.3"
device.nick = "HDA Intel PCH"
device.plugged.usec = "2126783"
device.product.id = "0xa0c8"
device.product.name = "Tiger Lake-LP Smart Sound Technology Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
media.class = "Audio/Device"
spa.object.id = "2"
factory.id = "15"
client.id = "46"
object.id = "47"
object.serial = "47"
object.path = "alsa:acp:PCH"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0x6005238000 irq 156"
alsa.driver_name = "snd_hda_intel"
alsa.mixer_name = "Realtek ALC256"
alsa.components = "HDA:10ec0256,10431032,00100002 HDA:80862812,80860101,00100000"
alsa.id = "PCH"
device.string = "0"
Profiles:
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5965, available: no)
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5765, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: no)
output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 865, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 665, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
pro-audio: Pro Audio (sinks: 5, sources: 1, priority: 1, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, latency offset: 0 usec, availability group: Legacy 1, availability unknown)
Properties:
port.type = "mic"
port.availability-group = "Legacy 1"
device.icon_name = "audio-input-microphone"
card.profile.port = "0"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "headset"
port.availability-group = "Legacy 2"
device.icon_name = "audio-input-microphone"
card.profile.port = "1"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71+input:analog-stereo, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1+input:analog-stereo, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2+input:analog-stereo, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3+input:analog-stereo
analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability group: Legacy 3, availability unknown)
Properties:
port.type = "speaker"
port.availability-group = "Legacy 3"
device.icon_name = "audio-speakers"
card.profile.port = "2"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 2, not available)
Properties:
port.type = "headphones"
port.availability-group = "Legacy 2"
device.icon_name = "audio-headphones"
card.profile.port = "3"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 4, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 4"
device.icon_name = "video-display"
card.profile.port = "4"
Part of profile(s): output:hdmi-stereo, output:hdmi-stereo+input:analog-stereo, output:hdmi-surround, output:hdmi-surround+input:analog-stereo, output:hdmi-surround71, output:hdmi-surround71+input:analog-stereo
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 5, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 5"
device.icon_name = "video-display"
card.profile.port = "5"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-stereo-extra1+input:analog-stereo, output:hdmi-surround-extra1, output:hdmi-surround-extra1+input:analog-stereo, output:hdmi-surround71-extra1, output:hdmi-surround71-extra1+input:analog-stereo
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 6, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 6"
device.icon_name = "video-display"
card.profile.port = "6"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-stereo-extra2+input:analog-stereo, output:hdmi-surround-extra2, output:hdmi-surround-extra2+input:analog-stereo, output:hdmi-surround71-extra2, output:hdmi-surround71-extra2+input:analog-stereo
hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 7, not available)
Properties:
port.type = "hdmi"
port.availability-group = "Legacy 7"
device.icon_name = "video-display"
card.profile.port = "7"
Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-stereo-extra3+input:analog-stereo, output:hdmi-surround-extra3, output:hdmi-surround-extra3+input:analog-stereo, output:hdmi-surround71-extra3, output:hdmi-surround71-extra3+input:analog-stereoFurthermore, running
pactl list sourcesI see
Source #56
State: RUNNING
Name: alsa_output.pci-0000_00_1f.3.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1f.3.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.class = "generic"
alsa.components = "HDA:10ec0256,10431032,00100002 HDA:80862812,80860101,00100000"
alsa.device = "0"
alsa.driver_name = "snd_hda_intel"
alsa.id = "ALC256 Analog"
alsa.long_card_name = "HDA Intel PCH at 0x6005238000 irq 156"
alsa.mixer_name = "Realtek ALC256"
alsa.name = "ALC256 Analog"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HDA Intel PCH at 0x6005238000 irq 156"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.path = "front:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "7"
device.api = "alsa"
device.class = "monitor"
device.icon_name = "audio-card-analog"
device.id = "47"
device.profile.description = "Analog Stereo"
device.profile.name = "analog-stereo"
device.routes = "2"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Built-in Audio"
node.name = "alsa_output.pci-0000_00_1f.3.analog-stereo"
node.nick = "ALC256 Analog"
node.pause-on-idle = "false"
object.path = "alsa:acp:PCH:7:playback"
port.group = "playback"
priority.driver = "1009"
priority.session = "1009"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "46"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "56"
object.serial = "56"
node.max-latency = "16384/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "32"
api.alsa.headroom = "0"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:00:1f.3"
device.enum.api = "udev"
device.form_factor = "internal"
device.name = "alsa_card.pci-0000_00_1f.3"
device.nick = "HDA Intel PCH"
device.plugged.usec = "2126783"
device.product.id = "0xa0c8"
device.product.name = "Tiger Lake-LP Smart Sound Technology Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
spa.object.id = "2"
device.string = "0"
Ports:
analog-output-speaker: Speakers (type: Speaker, priority: 10000, availability group: Legacy 3, availability unknown)
analog-output-headphones: Headphones (type: Headphones, priority: 9900, availability group: Legacy 2, not available)
Active Port: analog-output-speaker
Formats:
pcm
Source #57
State: RUNNING
Name: alsa_input.pci-0000_00_1f.3.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 0 / 0% / -inf dB, front-right: 65536 / 100% / 0.00 dB
balance 1.00
Base Volume: 6554 / 10% / -60.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.class = "generic"
alsa.components = "HDA:10ec0256,10431032,00100002 HDA:80862812,80860101,00100000"
alsa.device = "0"
alsa.driver_name = "snd_hda_intel"
alsa.id = "ALC256 Analog"
alsa.long_card_name = "HDA Intel PCH at 0x6005238000 irq 156"
alsa.mixer_name = "Realtek ALC256"
alsa.name = "ALC256 Analog"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HDA Intel PCH at 0x6005238000 irq 156"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.path = "front:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "capture"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "0"
device.api = "alsa"
device.class = "sound"
device.icon_name = "audio-card-analog"
device.id = "47"
device.profile.description = "Analog Stereo"
device.profile.name = "analog-stereo"
device.routes = "2"
factory.name = "api.alsa.pcm.source"
media.class = "Audio/Source"
device.description = "Built-in Audio"
node.name = "alsa_input.pci-0000_00_1f.3.analog-stereo"
node.nick = "ALC256 Analog"
node.pause-on-idle = "false"
object.path = "alsa:acp:PCH:0:capture"
port.group = "capture"
priority.driver = "2009"
priority.session = "2009"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "46"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "57"
object.serial = "57"
node.max-latency = "16384/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "32"
api.alsa.headroom = "32"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:00:1f.3"
device.enum.api = "udev"
device.form_factor = "internal"
device.name = "alsa_card.pci-0000_00_1f.3"
device.nick = "HDA Intel PCH"
device.plugged.usec = "2126783"
device.product.id = "0xa0c8"
device.product.name = "Tiger Lake-LP Smart Sound Technology Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
spa.object.id = "2"
device.string = "0"
Ports:
analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, availability group: Legacy 1, availability unknown)
analog-input-headset-mic: Headset Microphone (type: Headset, priority: 8800, availability group: Legacy 2, not available)
Active Port: analog-input-internal-mic
Formats:
pcmLikewise, here is the output of
pactl list source-outputsSource Output #298
Driver: PipeWire
Owner Module: n/a
Client: 270
Source: 57
Sample Specification: s16le 2ch 48000Hz
Channel Map: front-left,front-right
Format: pcm, format.sample_format = "\"s16le\"" format.rate = "48000" format.channels = "2" format.channel_map = "\"front-left,front-right\""
Corked: no
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Chromium input"
application.process.id = "4433"
application.process.user = "mixces"
application.process.host = "archlinux"
application.process.binary = "chromium"
application.language = "en_US.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "be56a0b04e60e2b53f7b5a7b683865e7"
application.process.session_id = "1"
application.icon_name = "chromium-browser"
media.name = "RecordStream"
pulse.corked = "false"
node.rate = "1/48000"
node.latency = "480/48000"
stream.is-live = "true"
node.name = "Chromium input"
node.want-driver = "true"
node.autoconnect = "true"
media.class = "Stream/Input/Audio"
port.group = "stream.0"
adapt.follower.spa-node = ""
object.register = "false"
factory.id = "7"
clock.quantum-limit = "8192"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
client.id = "61"
object.id = "70"
object.serial = "298"
pulse.attr.maxlength = "4194304"
pulse.attr.fragsize = "1920"
node.driver-id = "57"
module-stream-restore.id = "source-output-by-application-name:Chromium input"Running
wpctl statusshows
PipeWire 'pipewire-0' [1.4.2, mixces@archlinux, cookie:2165534023]
└─ Clients:
32. WirePlumber [1.4.2, mixces@archlinux, pid:701]
33. pipewire [1.4.2, mixces@archlinux, pid:702]
46. WirePlumber [export] [1.4.2, mixces@archlinux, pid:701]
61. Chromium input [1.4.2, mixces@archlinux, pid:4433]
64. wpctl [1.4.2, mixces@archlinux, pid:4842]
76. Chromium [1.4.2, mixces@archlinux, pid:4433]
Audio
├─ Devices:
│ 47. Built-in Audio [alsa]
│
├─ Sinks:
│ * 56. Built-in Audio Analog Stereo [vol: 0.25]
│
├─ Sources:
│ * 57. Built-in Audio Analog Stereo [vol: 1.00]
│
├─ Filters:
│
└─ Streams:
68. Chromium
71. output_FR > ALC256 Analog:playback_FR [active]
73. output_FL > ALC256 Analog:playback_FL [active]
80. Chromium input
62. input_FL < ALC256 Analog:capture_FL [active]
63. monitor_FR
65. monitor_FL
66. input_FR < ALC256 Analog:capture_FR [active]
Video
├─ Devices:
│ 51. USB2.0 HD UVC WebCam [v4l2]
│ 52. USB2.0 HD UVC WebCam [v4l2]
│
├─ Sinks:
│
├─ Sources:
│ * 59. USB2.0 HD UVC WebCam (V4L2)
│
├─ Filters:
│
└─ Streams:
Settings
└─ Default Configured Devices:and finally,
running
wpctl inspect 57shows me
id 57, type PipeWire:Interface:Node
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.class = "generic"
alsa.components = "HDA:10ec0256,10431032,00100002 HDA:80862812,80860101,00100000"
alsa.device = "0"
alsa.driver_name = "snd_hda_intel"
alsa.id = "ALC256 Analog"
alsa.long_card_name = "HDA Intel PCH at 0x6005238000 irq 156"
alsa.mixer_name = "Realtek ALC256"
alsa.name = "ALC256 Analog"
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "HDA Intel PCH at 0x6005238000 irq 156"
api.alsa.card.name = "HDA Intel PCH"
api.alsa.headroom = "32"
api.alsa.path = "front:0"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "capture"
api.alsa.period-num = "32"
api.alsa.period-size = "1024"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "0"
* client.id = "46"
clock.quantum-limit = "8192"
device.api = "alsa"
device.class = "sound"
device.icon-name = "audio-card-analog"
* device.id = "47"
device.profile.description = "Analog Stereo"
device.profile.name = "analog-stereo"
device.routes = "2"
* factory.id = "19"
factory.name = "api.alsa.pcm.source"
library.name = "audioconvert/libspa-audioconvert"
* media.class = "Audio/Source"
* node.description = "Built-in Audio Analog Stereo"
node.driver = "true"
node.loop.name = "data-loop.0"
node.max-latency = "16384/48000"
* node.name = "alsa_input.pci-0000_00_1f.3.analog-stereo"
* node.nick = "ALC256 Analog"
node.pause-on-idle = "false"
* object.path = "alsa:acp:PCH:0:capture"
* object.serial = "57"
port.group = "capture"
* priority.driver = "2009"
* priority.session = "2009"Genuinely any advice or help or even a slight hint would be greatly appreciated!
Last edited by Mixces (2025-05-29 18:36:01)
Offline
Guys, I feel rather silly. I had the brilliant idea of searching a bit more through GitHub to see if anyone else happens to have a solution that they placed in their dotfiles or something like that, and lo and behold, I found one that actually worked. In case anyone with an ALC256 audio chip is reading this, what I did to fix my microphone was create a file called
alsa-base.confwithin
/etc/modprobe.d/then added this line:
options snd-hda-intel model=headset-modeNow, everything works! Woooooooo
Offline
Pages: 1