You are not logged in.
- Topics: Active | Unanswered
#1 2025-05-07 22:37:10
- alba4k
- Member
- From: Switzerland
- Registered: 2021-12-05
- Posts: 92
- Website
[SOLVED] Microphone listed but not working
I recently reinstalled archlinux on my XPS 9320 (the microphone was working before) and now the microphone isn't recording anything anymore.
I can see it in pavucontrol just like I coulf before, and the speakers work just fine.
Disabling and re-enabling it in the bios does not change anything.
Other microphones, like the ones from my wireless earbuds, work.
Also, the microphone mute light on the function bar is always on (it worked and synced correctly on the old installation, but also sometimes got stick there)
I am using pipewire and have installed linux-firmware and sof-firmware
Last edited by alba4k (2025-06-03 18:07:50)
Offline
#2 2025-05-31 20:19:38
- alba4k
- Member
- From: Switzerland
- Registered: 2021-12-05
- Posts: 92
- Website
Re: [SOLVED] Microphone listed but not working
Offline
#3 2025-06-02 14:41:08
- busload4415
- Member
- Registered: 2025-06-02
- Posts: 1
Re: [SOLVED] Microphone listed but not working
The same is happening on my XPS + a USB microphone.
USB Microphone is detected. The bar in pavucontrol is moving when I speak in the USB microphone, but the sound is not properly routed to the browser app.
Wireless headphones microphone works.
Everything worked before the kernel 6.14.9-arch1-1 update.
Last edited by busload4415 (2025-06-02 14:41:56)
Offline
#4 2025-06-02 15:26:41
- alba4k
- Member
- From: Switzerland
- Registered: 2021-12-05
- Posts: 92
- Website
Re: [SOLVED] Microphone listed but not working
Not the same issue at all. I don't even see the bar moving in pavucontrol
Offline
#5 2025-06-03 14:08:57
- V1del
- Forum Moderator
- Registered: 2012-10-16
- Posts: 24,449
Re: [SOLVED] Microphone listed but not working
If the bar is not moving there, are you routing your inputs properly? During an attempt at recording (which tool are you using to test this?) what output does
arecord -l
sudo fuser -v /dev/snd/*
pactl list sources
pactl list source-outputsgive you?
Offline
#6 2025-06-03 18:06:11
- alba4k
- Member
- From: Switzerland
- Registered: 2021-12-05
- Posts: 92
- Website
Re: [SOLVED] Microphone listed but not working
Recording with discord or the bar in pavucontrol gives nothing. I just see a miniscule dot randomly moving in pavucontrol. even a whatsapp audio message is just silent
$ arecord -l**** List of CAPTURE Hardware Devices ****
card 0: sofsoundwire [sof-soundwire], device 4: Microphone (*) []
Subdevices: 0/1
Subdevice #0: subdevice #0# fuser -v /dev/snd/* UTENTE PID ACCESSO COMANDO
/dev/snd/controlC0: alba4k 1629 F.... pipewire
alba4k 1630 F.... wireplumber
/dev/snd/pcmC0D2p: alba4k 1629 F...m pipewire
/dev/snd/pcmC0D4c: alba4k 1629 F...m pipewire
/dev/snd/pcmC0D5p: alba4k 1629 F...m pipewire
/dev/snd/pcmC0D6p: alba4k 1629 F...m pipewire
/dev/snd/pcmC0D7p: alba4k 1629 F...m pipewire
/dev/snd/seq: alba4k 1629 F.... pipewire$ pactl list sourcesSource #61
State: IDLE
Name: alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__HDMI3__sink.monitor
Description: Monitor of Alder Lake PCH-P High Definition Audio Controller HDMI / DisplayPort 3 Output
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__HDMI3__sink
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "sof-soundwire"
alsa.class = "generic"
alsa.components = "HDA:8086281c,80860101,00100000 cfg-amp:2 spk:rt1316 mic:rt715-sdca"
alsa.device = "7"
alsa.driver_name = "snd_soc_sof_sdw"
alsa.id = "HDMI 3 (*)"
alsa.long_card_name = "DellInc.-XPS9320--0V0059"
alsa.mixer_device = "_ucm0001.hw:sofsoundwire"
alsa.mixer_name = "Intel Alderlake-P HDMI"
alsa.name = ""
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "DellInc.-XPS9320--0V0059"
api.alsa.card.name = "sof-soundwire"
api.alsa.open.ucm = "true"
api.alsa.path = "hw:sofsoundwire,7"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "0"
device.api = "alsa"
device.class = "monitor"
device.icon_name = "video-display"
device.id = "51"
device.profile.description = "HDMI / DisplayPort 3 Output"
device.profile.name = "HiFi: HDMI3: sink"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Alder Lake PCH-P High Definition Audio Controller"
node.name = "alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__HDMI3__sink"
node.nick = "HDMI / DisplayPort 3 Output"
node.pause-on-idle = "false"
object.path = "alsa:acp:sofsoundwire:0:playback"
port.group = "playback"
priority.driver = "632"
priority.session = "632"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "47"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "59"
object.serial = "61"
node.max-latency = "4096/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "8"
api.alsa.headroom = "0"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:00:1f.3-platform-sof_sdw"
device.enum.api = "udev"
device.name = "alsa_card.pci-0000_00_1f.3-platform-sof_sdw"
device.nick = "sof-soundwire"
device.plugged.usec = "4731703"
device.product.id = "0x51c8"
device.product.name = "Alder Lake PCH-P High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
spa.object.id = "2"
device.string = "0"
Ports:
[Out] HDMI3: HDMI / DisplayPort 3 Output (type: HDMI, priority: 700, availability group: HDMI/DP,pcm=7, not available)
Active Port: [Out] HDMI3
Formats:
pcm
Source #62
State: IDLE
Name: alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__HDMI2__sink.monitor
Description: Monitor of Alder Lake PCH-P High Definition Audio Controller HDMI / DisplayPort 2 Output
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__HDMI2__sink
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "sof-soundwire"
alsa.class = "generic"
alsa.components = "HDA:8086281c,80860101,00100000 cfg-amp:2 spk:rt1316 mic:rt715-sdca"
alsa.device = "6"
alsa.driver_name = "snd_soc_sof_sdw"
alsa.id = "HDMI 2 (*)"
alsa.long_card_name = "DellInc.-XPS9320--0V0059"
alsa.mixer_device = "_ucm0001.hw:sofsoundwire"
alsa.mixer_name = "Intel Alderlake-P HDMI"
alsa.name = ""
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "DellInc.-XPS9320--0V0059"
api.alsa.card.name = "sof-soundwire"
api.alsa.open.ucm = "true"
api.alsa.path = "hw:sofsoundwire,6"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "1"
device.api = "alsa"
device.class = "monitor"
device.icon_name = "video-display"
device.id = "51"
device.profile.description = "HDMI / DisplayPort 2 Output"
device.profile.name = "HiFi: HDMI2: sink"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Alder Lake PCH-P High Definition Audio Controller"
node.name = "alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__HDMI2__sink"
node.nick = "HDMI / DisplayPort 2 Output"
node.pause-on-idle = "false"
object.path = "alsa:acp:sofsoundwire:1:playback"
port.group = "playback"
priority.driver = "648"
priority.session = "648"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "47"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "60"
object.serial = "62"
node.max-latency = "4096/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "8"
api.alsa.headroom = "0"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:00:1f.3-platform-sof_sdw"
device.enum.api = "udev"
device.name = "alsa_card.pci-0000_00_1f.3-platform-sof_sdw"
device.nick = "sof-soundwire"
device.plugged.usec = "4731703"
device.product.id = "0x51c8"
device.product.name = "Alder Lake PCH-P High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
spa.object.id = "2"
device.string = "0"
Ports:
[Out] HDMI2: HDMI / DisplayPort 2 Output (type: HDMI, priority: 600, availability group: HDMI/DP,pcm=6, not available)
Active Port: [Out] HDMI2
Formats:
pcm
Source #63
State: IDLE
Name: alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__HDMI1__sink.monitor
Description: Monitor of Alder Lake PCH-P High Definition Audio Controller HDMI / DisplayPort 1 Output
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__HDMI1__sink
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "sof-soundwire"
alsa.class = "generic"
alsa.components = "HDA:8086281c,80860101,00100000 cfg-amp:2 spk:rt1316 mic:rt715-sdca"
alsa.device = "5"
alsa.driver_name = "snd_soc_sof_sdw"
alsa.id = "HDMI 1 (*)"
alsa.long_card_name = "DellInc.-XPS9320--0V0059"
alsa.mixer_device = "_ucm0001.hw:sofsoundwire"
alsa.mixer_name = "Intel Alderlake-P HDMI"
alsa.name = ""
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "DellInc.-XPS9320--0V0059"
api.alsa.card.name = "sof-soundwire"
api.alsa.open.ucm = "true"
api.alsa.path = "hw:sofsoundwire,5"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "2"
device.api = "alsa"
device.class = "monitor"
device.icon_name = "video-display"
device.id = "51"
device.profile.description = "HDMI / DisplayPort 1 Output"
device.profile.name = "HiFi: HDMI1: sink"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Alder Lake PCH-P High Definition Audio Controller"
node.name = "alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__HDMI1__sink"
node.nick = "HDMI / DisplayPort 1 Output"
node.pause-on-idle = "false"
object.path = "alsa:acp:sofsoundwire:2:playback"
port.group = "playback"
priority.driver = "664"
priority.session = "664"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "47"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "61"
object.serial = "63"
node.max-latency = "4096/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "8"
api.alsa.headroom = "0"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:00:1f.3-platform-sof_sdw"
device.enum.api = "udev"
device.name = "alsa_card.pci-0000_00_1f.3-platform-sof_sdw"
device.nick = "sof-soundwire"
device.plugged.usec = "4731703"
device.product.id = "0x51c8"
device.product.name = "Alder Lake PCH-P High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
spa.object.id = "2"
device.string = "0"
Ports:
[Out] HDMI1: HDMI / DisplayPort 1 Output (type: HDMI, priority: 500, availability group: HDMI/DP,pcm=5, not available)
Active Port: [Out] HDMI1
Formats:
pcm
Source #64
State: IDLE
Name: alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__Speaker__sink.monitor
Description: Monitor of Alder Lake PCH-P High Definition Audio Controller Speaker
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__Speaker__sink
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "sof-soundwire"
alsa.class = "generic"
alsa.components = "HDA:8086281c,80860101,00100000 cfg-amp:2 spk:rt1316 mic:rt715-sdca"
alsa.device = "2"
alsa.driver_name = "snd_soc_sof_sdw"
alsa.id = "Speaker (*)"
alsa.long_card_name = "DellInc.-XPS9320--0V0059"
alsa.mixer_device = "_ucm0001.hw:sofsoundwire"
alsa.mixer_name = "Intel Alderlake-P HDMI"
alsa.name = ""
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "DellInc.-XPS9320--0V0059"
api.alsa.card.name = "sof-soundwire"
api.alsa.open.ucm = "true"
api.alsa.path = "hw:sofsoundwire,2"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "playback"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "3"
device.api = "alsa"
device.class = "monitor"
device.icon_name = "audio-speakers"
device.id = "51"
device.profile.description = "Speaker"
device.profile.name = "HiFi: Speaker: sink"
device.routes = "1"
factory.name = "api.alsa.pcm.sink"
media.class = "Audio/Sink"
device.description = "Alder Lake PCH-P High Definition Audio Controller"
node.name = "alsa_output.pci-0000_00_1f.3-platform-sof_sdw.HiFi__Speaker__sink"
node.nick = "Speaker"
node.pause-on-idle = "false"
object.path = "alsa:acp:sofsoundwire:3:playback"
port.group = "playback"
priority.driver = "712"
priority.session = "712"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "47"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "62"
object.serial = "64"
node.max-latency = "4096/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "8"
api.alsa.headroom = "0"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:00:1f.3-platform-sof_sdw"
device.enum.api = "udev"
device.name = "alsa_card.pci-0000_00_1f.3-platform-sof_sdw"
device.nick = "sof-soundwire"
device.plugged.usec = "4731703"
device.product.id = "0x51c8"
device.product.name = "Alder Lake PCH-P High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
spa.object.id = "2"
device.string = "0"
Ports:
[Out] Speaker: Speaker (type: Speaker, priority: 100, availability unknown)
Active Port: [Out] Speaker
Formats:
pcm
Source #65
State: RUNNING
Name: alsa_input.pci-0000_00_1f.3-platform-sof_sdw.HiFi__Mic__source
Description: Alder Lake PCH-P High Definition Audio Controller SoundWire microphones
Driver: PipeWire
Sample Specification: s32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 99957 / 153% / 11.00 dB, front-right: 99957 / 153% / 11.00 dB
balance 0.00
Base Volume: 20724 / 32% / -30.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.card = "0"
alsa.card_name = "sof-soundwire"
alsa.class = "generic"
alsa.components = "HDA:8086281c,80860101,00100000 cfg-amp:2 spk:rt1316 mic:rt715-sdca"
alsa.device = "4"
alsa.driver_name = "snd_soc_sof_sdw"
alsa.id = "Microphone (*)"
alsa.long_card_name = "DellInc.-XPS9320--0V0059"
alsa.mixer_device = "_ucm0001.hw:sofsoundwire"
alsa.mixer_name = "Intel Alderlake-P HDMI"
alsa.name = ""
alsa.resolution_bits = "16"
alsa.subclass = "generic-mix"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.sync.id = "00000000:00000000:00000000:00000000"
api.alsa.card.longname = "DellInc.-XPS9320--0V0059"
api.alsa.card.name = "sof-soundwire"
api.alsa.open.ucm = "true"
api.alsa.path = "hw:sofsoundwire,4"
api.alsa.pcm.card = "0"
api.alsa.pcm.stream = "capture"
audio.channels = "2"
audio.position = "FL,FR"
card.profile.device = "4"
device.api = "alsa"
device.class = "sound"
device.icon_name = "audio-input-microphone"
device.id = "51"
device.profile.description = "SoundWire microphones"
device.profile.name = "HiFi: Mic: source"
device.routes = "1"
factory.name = "api.alsa.pcm.source"
media.class = "Audio/Source"
device.description = "Alder Lake PCH-P High Definition Audio Controller"
node.name = "alsa_input.pci-0000_00_1f.3-platform-sof_sdw.HiFi__Mic__source"
node.nick = "SoundWire microphones"
node.pause-on-idle = "false"
object.path = "alsa:acp:sofsoundwire:4:capture"
port.group = "capture"
priority.driver = "1680"
priority.session = "1680"
factory.id = "19"
clock.quantum-limit = "8192"
client.id = "47"
node.driver = "true"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
object.id = "63"
object.serial = "65"
node.max-latency = "4096/48000"
api.alsa.period-size = "1024"
api.alsa.period-num = "8"
api.alsa.headroom = "32"
api.acp.auto-port = "false"
api.acp.auto-profile = "false"
api.alsa.card = "0"
api.alsa.split-enable = "true"
api.alsa.use-acp = "true"
api.dbus.ReserveDevice1 = "Audio0"
api.dbus.ReserveDevice1.Priority = "-20"
device.bus = "pci"
device.bus_path = "pci-0000:00:1f.3-platform-sof_sdw"
device.enum.api = "udev"
device.name = "alsa_card.pci-0000_00_1f.3-platform-sof_sdw"
device.nick = "sof-soundwire"
device.plugged.usec = "4731703"
device.product.id = "0x51c8"
device.product.name = "Alder Lake PCH-P High Definition Audio Controller"
device.subsystem = "sound"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sof_sdw/sound/card0"
device.vendor.id = "0x8086"
device.vendor.name = "Intel Corporation"
spa.object.id = "2"
device.string = "0"
Ports:
[In] Mic: SoundWire microphones (type: Mic, priority: 100, availability unknown)
Active Port: [In] Mic
Formats:
pcm$ pactl list source-outputsSource Output #586
Driver: PipeWire
Owner Module: n/a
Client: 585
Source: 61
Sample Specification: float32le 1ch 144Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "144" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Regolazione del volume PulseAudio"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "6.1"
application.process.id = "158224"
application.process.user = "alba4k"
application.process.host = "dell-xps"
application.process.binary = "pavucontrol"
application.language = "it_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "3fbdcc9466da44238e9eed04a4ecaf73"
application.process.session_id = "3"
media.name = "Rilevato picco"
pulse.corked = "false"
node.rate = "1/144"
node.latency = "1/144"
stream.monitor = "true"
target.object = "61"
stream.is-live = "true"
node.name = "Regolazione del volume PulseAudio"
node.want-driver = "true"
node.autoconnect = "true"
node.dont-reconnect = "true"
media.class = "Stream/Input/Audio"
resample.peaks = "true"
channelmix.normalize = "true"
port.ignore-latency = "true"
port.group = "stream.0"
adapt.follower.spa-node = ""
object.register = "false"
factory.id = "7"
clock.quantum-limit = "8192"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
client.id = "84"
object.id = "91"
object.serial = "586"
node.driver-id = "59"
pulse.attr.maxlength = "4194304"
pulse.attr.fragsize = "4"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #587
Driver: PipeWire
Owner Module: n/a
Client: 585
Source: 62
Sample Specification: float32le 1ch 144Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "144" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Regolazione del volume PulseAudio"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "6.1"
application.process.id = "158224"
application.process.user = "alba4k"
application.process.host = "dell-xps"
application.process.binary = "pavucontrol"
application.language = "it_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "3fbdcc9466da44238e9eed04a4ecaf73"
application.process.session_id = "3"
media.name = "Rilevato picco"
pulse.corked = "false"
node.rate = "1/144"
node.latency = "1/144"
stream.monitor = "true"
target.object = "62"
stream.is-live = "true"
node.name = "Regolazione del volume PulseAudio"
node.want-driver = "true"
node.autoconnect = "true"
node.dont-reconnect = "true"
media.class = "Stream/Input/Audio"
resample.peaks = "true"
channelmix.normalize = "true"
port.ignore-latency = "true"
port.group = "stream.0"
adapt.follower.spa-node = ""
object.register = "false"
factory.id = "7"
clock.quantum-limit = "8192"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
client.id = "84"
object.id = "90"
object.serial = "587"
node.driver-id = "60"
pulse.attr.maxlength = "4194304"
pulse.attr.fragsize = "4"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #588
Driver: PipeWire
Owner Module: n/a
Client: 585
Source: 63
Sample Specification: float32le 1ch 144Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "144" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Regolazione del volume PulseAudio"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "6.1"
application.process.id = "158224"
application.process.user = "alba4k"
application.process.host = "dell-xps"
application.process.binary = "pavucontrol"
application.language = "it_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "3fbdcc9466da44238e9eed04a4ecaf73"
application.process.session_id = "3"
media.name = "Rilevato picco"
pulse.corked = "false"
node.rate = "1/144"
node.latency = "1/144"
stream.monitor = "true"
target.object = "63"
stream.is-live = "true"
node.name = "Regolazione del volume PulseAudio"
node.want-driver = "true"
node.autoconnect = "true"
node.dont-reconnect = "true"
media.class = "Stream/Input/Audio"
resample.peaks = "true"
channelmix.normalize = "true"
port.ignore-latency = "true"
port.group = "stream.0"
adapt.follower.spa-node = ""
object.register = "false"
factory.id = "7"
clock.quantum-limit = "8192"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
client.id = "84"
object.id = "50"
object.serial = "588"
node.driver-id = "61"
pulse.attr.maxlength = "4194304"
pulse.attr.fragsize = "4"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #589
Driver: PipeWire
Owner Module: n/a
Client: 585
Source: 64
Sample Specification: float32le 1ch 144Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "144" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Regolazione del volume PulseAudio"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "6.1"
application.process.id = "158224"
application.process.user = "alba4k"
application.process.host = "dell-xps"
application.process.binary = "pavucontrol"
application.language = "it_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "3fbdcc9466da44238e9eed04a4ecaf73"
application.process.session_id = "3"
media.name = "Rilevato picco"
pulse.corked = "false"
node.rate = "1/144"
node.latency = "1/144"
stream.monitor = "true"
target.object = "64"
stream.is-live = "true"
node.name = "Regolazione del volume PulseAudio"
node.want-driver = "true"
node.autoconnect = "true"
node.dont-reconnect = "true"
media.class = "Stream/Input/Audio"
resample.peaks = "true"
channelmix.normalize = "true"
port.ignore-latency = "true"
port.group = "stream.0"
adapt.follower.spa-node = ""
object.register = "false"
factory.id = "7"
clock.quantum-limit = "8192"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
client.id = "84"
object.id = "39"
object.serial = "589"
node.driver-id = "62"
pulse.attr.maxlength = "4194304"
pulse.attr.fragsize = "4"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #590
Driver: PipeWire
Owner Module: n/a
Client: 585
Source: 65
Sample Specification: float32le 1ch 144Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "144" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Regolazione del volume PulseAudio"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "6.1"
application.process.id = "158224"
application.process.user = "alba4k"
application.process.host = "dell-xps"
application.process.binary = "pavucontrol"
application.language = "it_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "3fbdcc9466da44238e9eed04a4ecaf73"
application.process.session_id = "3"
media.name = "Rilevato picco"
pulse.corked = "false"
node.rate = "1/144"
node.latency = "1/144"
stream.monitor = "true"
target.object = "65"
stream.is-live = "true"
node.name = "Regolazione del volume PulseAudio"
node.want-driver = "true"
node.autoconnect = "true"
node.dont-reconnect = "true"
media.class = "Stream/Input/Audio"
resample.peaks = "true"
channelmix.normalize = "true"
port.ignore-latency = "true"
port.group = "stream.0"
adapt.follower.spa-node = ""
object.register = "false"
factory.id = "7"
clock.quantum-limit = "8192"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
client.id = "84"
object.id = "87"
object.serial = "590"
node.driver-id = "63"
pulse.attr.maxlength = "4194304"
pulse.attr.fragsize = "4"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
Source Output #693
Driver: PipeWire
Owner Module: n/a
Client: 585
Source: 4294967295
Sample Specification: float32le 1ch 144Hz
Channel Map: mono
Format: pcm, format.sample_format = "\"float32le\"" format.rate = "144" format.channels = "1" format.channel_map = "\"mono\""
Corked: no
Mute: no
Volume: mono: 0 / 0% / -inf dB
balance 0.00
Buffer Latency: 0 usec
Source Latency: 0 usec
Resample method: PipeWire
Properties:
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "Regolazione del volume PulseAudio"
application.id = "org.PulseAudio.pavucontrol"
application.icon_name = "audio-card"
application.version = "6.1"
application.process.id = "158224"
application.process.user = "alba4k"
application.process.host = "dell-xps"
application.process.binary = "pavucontrol"
application.language = "it_CH.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "3fbdcc9466da44238e9eed04a4ecaf73"
application.process.session_id = "3"
media.name = "Rilevato picco"
pulse.corked = "false"
node.rate = "1/144"
node.latency = "1/144"
stream.monitor = "true"
target.object = "686"
stream.is-live = "true"
node.name = "Regolazione del volume PulseAudio"
node.want-driver = "true"
node.autoconnect = "true"
node.dont-reconnect = "true"
media.class = "Stream/Input/Audio"
resample.peaks = "true"
channelmix.normalize = "true"
port.ignore-latency = "true"
port.group = "stream.0"
adapt.follower.spa-node = ""
object.register = "false"
factory.id = "7"
clock.quantum-limit = "8192"
node.loop.name = "data-loop.0"
library.name = "audioconvert/libspa-audioconvert"
client.id = "84"
object.id = "130"
object.serial = "693"
module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"Here u go, hope this helps
Offline
#7 2025-06-03 18:07:37
- alba4k
- Member
- From: Switzerland
- Registered: 2021-12-05
- Posts: 92
- Website
Re: [SOLVED] Microphone listed but not working
Just fixed with
# alsactl init && alsactl storeThanks for helping in another post and sorry for this timewaste 
)
Btw apparently I need to have alsa-utils installed for the mic light to sync correctly - the mic works even without now, but the light just stays on permanently if I uninstall it, weird
Last edited by alba4k (2025-06-03 18:13:54)
Offline