You are not logged in.

Pages: 1

#1 2025-05-23 10:51:36

jogeso2305
Member
Registered: 2025-05-23
Posts: 5

No sound input from Fifine USB microphone in Telegram and PulseAudio

I'm using a Fifine USB microphone on Linux (PipeWire with PulseAudio compatibility). The mic is detected and works with arecord -D hw:0,0, and I can hear the recorded audio.

However:

    In pavucontrol, the mic appears but shows no input level.

    In parecord, the recording creates a file, but it contains no sound.

    Telegram Desktop sees the mic, but doesn't record any audio.

I've tried restarting PipeWire, checking profiles in pavucontrol, and verifying with arecord, which works. But PulseAudio-based apps don't receive audio input from the mic.

Any ideas?

Offline

#2 2025-05-23 14:06:32

WorMzy
Administrator
From: Scotland
Registered: 2010-06-16
Posts: 12,822
Website

Re: No sound input from Fifine USB microphone in Telegram and PulseAudio

Mod note: moving to NC

Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD

Making lemonade from lemons since 2015.

Offline

#3 2025-05-23 14:56:26

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,479

Re: No sound input from Fifine USB microphone in Telegram and PulseAudio

What are your outputs wrapped in  [code][/code] tags for 

pactl list cards
pactl list sources
pactl list source-outputs
arecord -lL

Offline

#4 2025-05-23 15:23:20

jogeso2305
Member
Registered: 2025-05-23
Posts: 5

Re: No sound input from Fifine USB microphone in Telegram and PulseAudio

Output:


[heso@heso-x79g ~]$ pactl list cards
Card #0
        Name: alsa_card.pci-0000_03_00.1
        Driver: module-alsa-card.c
        Owner Module: 6
        Properties:
                alsa.card = "1"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xfb080000 irq 44"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:03:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "10f0"
                device.product.name = "GP104 High Definition Audio Controller"
                device.string = "1"
                device.description = "GP104 High Definition Audio Controller"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profiles:
                output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: off
        Ports:
                hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
                hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
                hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
                hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3

Card #1
        Name: alsa_card.pci-0000_00_1b.0
        Driver: module-alsa-card.c
        Owner Module: 7
        Properties:
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xfb200000 irq 45"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1d20"
                device.product.name = "C600/X79 series chipset High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "0"
                device.description = "Built-in Audio"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profiles:
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 32833, available: yes)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 39268, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 39333, available: yes)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: output:analog-stereo+input:analog-stereo
        Ports:
                analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, not available)
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, not available)
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, available)
                        Properties:
                                device.icon_name = "audio-headphones"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo

Card #2
        Name: alsa_card.usb-3142_Fifine_Microphone-00
        Driver: module-alsa-card.c
        Owner Module: 8
        Properties:
                alsa.card = "2"
                alsa.card_name = "Fifine Microphone"
                alsa.long_card_name = "Fifine Microphone at usb-0000:00:1d.0-1.4, full speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:00:1d.0-usb-0:1.4:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/sound/card2"
                udev.id = "usb-3142_Fifine_Microphone-00"
                device.bus = "usb"
                device.vendor.id = "3142"
                device.vendor.name = "3142"
                device.product.id = "5060"
                device.product.name = "Fifine Microphone"
                device.serial = "3142_Fifine_Microphone"
                device.form_factor = "microphone"
                device.string = "2"
                device.description = "Fifine Microphone"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-input-microphone-usb"
        Profiles:
                input:mono-fallback: Mono Input (sinks: 0, sources: 1, priority: 1, available: yes)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: input:mono-fallback
        Ports:
                analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:mono-fallback
[heso@heso-x79g ~]$ pactl list sources
Source #0
        State: SUSPENDED
        Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
        Description: Monitor of Built-in Audio Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 7
        Mute: no
        Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        Base Volume: 65536 / 100% / 0,00 dB
        Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
        Latency: 0 usec, configured 0 usec
        Flags: DECIBEL_VOLUME LATENCY 
        Properties:
                device.description = "Monitor of Built-in Audio Analog Stereo"
                device.class = "monitor"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xfb200000 irq 45"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1d20"
                device.product.name = "C600/X79 series chipset High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "0"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Formats:
                pcm

Source #1
        State: SUSPENDED
        Name: alsa_input.pci-0000_00_1b.0.analog-stereo
        Description: Built-in Audio Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 7
        Mute: no
        Volume: front-left: 65537 / 100% / 0,00 dB,   front-right: 65537 / 100% / 0,00 dB
                balance 0,00
        Base Volume: 5841 /   9% / -63,00 dB
        Monitor of Sink: n/a
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC662 rev1 Analog"
                alsa.id = "ALC662 rev1 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xfb200000 irq 45"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1d20"
                device.product.name = "C600/X79 series chipset High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "front:0"
                device.buffering.buffer_size = "352800"
                device.buffering.fragment_size = "176400"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Built-in Audio Analog Stereo"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, available)
                analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, not available)
                analog-input-linein: Line In (type: Line, priority: 8100, not available)
        Active Port: analog-input-front-mic
        Formats:
                pcm

Source #2
        State: SUSPENDED
        Name: alsa_input.usb-3142_Fifine_Microphone-00.mono-fallback
        Description: Fifine Microphone Mono
        Driver: module-alsa-card.c
        Sample Specification: s16le 1ch 44100Hz
        Channel Map: mono
        Owner Module: 8
        Mute: no
        Volume: mono: 65536 / 100% / 0,00 dB
                balance 0,00
        Base Volume: 19944 /  30% / -31,00 dB
        Monitor of Sink: n/a
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "USB Audio"
                alsa.id = "USB Audio"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "2"
                alsa.card_name = "Fifine Microphone"
                alsa.long_card_name = "Fifine Microphone at usb-0000:00:1d.0-1.4, full speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:00:1d.0-usb-0:1.4:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/sound/card2"
                udev.id = "usb-3142_Fifine_Microphone-00"
                device.bus = "usb"
                device.vendor.id = "3142"
                device.vendor.name = "3142"
                device.product.id = "5060"
                device.product.name = "Fifine Microphone"
                device.serial = "3142_Fifine_Microphone"
                device.form_factor = "microphone"
                device.string = "hw:2"
                device.buffering.buffer_size = "176400"
                device.buffering.fragment_size = "88200"
                device.access_mode = "mmap+timer"
                device.profile.name = "mono-fallback"
                device.profile.description = "Mono"
                device.description = "Fifine Microphone Mono"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-input-microphone-usb"
        Ports:
                analog-input-mic: Microphone (type: Mic, priority: 8700, availability unknown)
        Active Port: analog-input-mic
        Formats:
                pcm
[heso@heso-x79g ~]$ pactl list source-outputs
[heso@heso-x79g ~]$ arecord -lL
null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pipewire
    PipeWire Sound Server
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PipeWire Media Server)
sysdefault:CARD=PCH
    HDA Intel PCH, ALC662 rev1 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC662 rev1 Analog
    Front output / input
usbstream:CARD=PCH
    HDA Intel PCH
    USB Stream Output
usbstream:CARD=NVidia
    HDA NVidia
    USB Stream Output
sysdefault:CARD=Microphone
    Fifine Microphone, USB Audio
    Default Audio Device
front:CARD=Microphone,DEV=0
    Fifine Microphone, USB Audio
    Front output / input
usbstream:CARD=Microphone
    Fifine Microphone
    USB Stream Output
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 2: ALC662 rev1 Alt Analog [ALC662 rev1 Alt Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: Microphone [Fifine Microphone], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
[heso@heso-x79g ~]$

Offline

#5 2025-05-23 21:08:12

jogeso2305
Member
Registered: 2025-05-23
Posts: 5

Re: No sound input from Fifine USB microphone in Telegram and PulseAudio

Thanks to everyone who tried to help.

Somehow, YouTube video playback suddenly stopped working. While searching for a solution, I stumbled upon this thread: https://bbs.archlinux.org/viewtopic.php?id=276918 , and found that running

pacman -Syu pipewire-media-session

did the trick.

Not only did YouTube start working again, but I also started hearing sound from my device — the volume meter began responding too.

Last edited by jogeso2305 (2025-05-23 21:08:55)

Offline

#6 2025-06-15 11:53:38

jogeso2305
Member
Registered: 2025-05-23
Posts: 5

Re: No sound input from Fifine USB microphone in Telegram and PulseAudio

Hi everyone again,
For some reason, the sound stopped working.

I was cleaning my room and unplugged the USB microphone.
After I plugged it back in, the sound stopped working.

Please help.

[heso@heso-x79g ~]$ pactl list cards
pactl list sources
pactl list source-outputs
arecord -lL
Card #0
        Name: alsa_card.pci-0000_03_00.1
        Driver: module-alsa-card.c
        Owner Module: 6
        Properties:
                alsa.card = "1"
                alsa.card_name = "HDA NVidia"
                alsa.long_card_name = "HDA NVidia at 0xfb080000 irq 44"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:03:00.1"
                sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1"
                device.bus = "pci"
                device.vendor.id = "10de"
                device.vendor.name = "NVIDIA Corporation"
                device.product.id = "10f0"
                device.product.name = "GP104 High Definition Audio Controller"
                device.string = "1"
                device.description = "GP104 High Definition Audio Controller"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profiles:
                output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: no)
                output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (sinks: 1, sources: 0, priority: 800, available: no)
                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
                output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: off
        Ports:
                hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
                hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
                hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
                hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "video-display"
                        Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3

Card #1
        Name: alsa_card.pci-0000_00_1b.0
        Driver: module-alsa-card.c
        Owner Module: 7
        Properties:
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xfb200000 irq 45"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1d20"
                device.product.name = "C600/X79 series chipset High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "0"
                device.description = "Built-in Audio"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Profiles:
                input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 32833, available: yes)
                output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 39268, available: yes)
                output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 39333, available: yes)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: output:analog-stereo+input:analog-stereo
        Ports:
                analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, not available)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, not available)
                        Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, not available)
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
                analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, available)
                        Properties:
                                device.icon_name = "audio-headphones"
                        Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo

Card #2
        Name: alsa_card.usb-3142_Fifine_Microphone-00
        Driver: module-alsa-card.c
        Owner Module: 8
        Properties:
                alsa.card = "2"
                alsa.card_name = "Fifine Microphone"
                alsa.long_card_name = "Fifine Microphone at usb-0000:00:1d.0-1.2, full speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/sound/card2"
                udev.id = "usb-3142_Fifine_Microphone-00"
                device.bus = "usb"
                device.vendor.id = "3142"
                device.vendor.name = "3142"
                device.product.id = "5060"
                device.product.name = "Fifine Microphone"
                device.serial = "3142_Fifine_Microphone"
                device.form_factor = "microphone"
                device.string = "2"
                device.description = "Fifine Microphone"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-input-microphone-usb"
        Profiles:
                input:mono-fallback: Mono Input (sinks: 0, sources: 1, priority: 1, available: yes)
                off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: input:mono-fallback
        Ports:
                analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
                        Properties:
                                device.icon_name = "audio-input-microphone"
                        Part of profile(s): input:mono-fallback
Source #0
        State: IDLE
        Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor
        Description: Monitor of Built-in Audio Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 48000Hz
        Channel Map: front-left,front-right
        Owner Module: 7
        Mute: no
        Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        Base Volume: 65536 / 100% / 0,00 dB
        Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo
        Latency: 0 usec, configured 1837500 usec
        Flags: DECIBEL_VOLUME LATENCY 
        Properties:
                device.description = "Monitor of Built-in Audio Analog Stereo"
                device.class = "monitor"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xfb200000 irq 45"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1d20"
                device.product.name = "C600/X79 series chipset High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "0"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Formats:
                pcm

Source #1
        State: SUSPENDED
        Name: alsa_input.pci-0000_00_1b.0.analog-stereo
        Description: Built-in Audio Analog Stereo
        Driver: module-alsa-card.c
        Sample Specification: s16le 2ch 44100Hz
        Channel Map: front-left,front-right
        Owner Module: 7
        Mute: no
        Volume: front-left: 44650 /  68% / -10,00 dB,   front-right: 44650 /  68% / -10,00 dB
                balance 0,00
        Base Volume: 5841 /   9% / -63,00 dB
        Monitor of Sink: n/a
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "ALC662 rev1 Analog"
                alsa.id = "ALC662 rev1 Analog"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "0"
                alsa.card_name = "HDA Intel PCH"
                alsa.long_card_name = "HDA Intel PCH at 0xfb200000 irq 45"
                alsa.driver_name = "snd_hda_intel"
                device.bus_path = "pci-0000:00:1b.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                device.bus = "pci"
                device.vendor.id = "8086"
                device.vendor.name = "Intel Corporation"
                device.product.id = "1d20"
                device.product.name = "C600/X79 series chipset High Definition Audio Controller"
                device.form_factor = "internal"
                device.string = "front:0"
                device.buffering.buffer_size = "352800"
                device.buffering.fragment_size = "176400"
                device.access_mode = "mmap+timer"
                device.profile.name = "analog-stereo"
                device.profile.description = "Analog Stereo"
                device.description = "Built-in Audio Analog Stereo"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-pci"
        Ports:
                analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, available)
                analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, not available)
                analog-input-linein: Line In (type: Line, priority: 8100, not available)
        Active Port: analog-input-front-mic
        Formats:
                pcm

Source #2
        State: SUSPENDED
        Name: alsa_input.usb-3142_Fifine_Microphone-00.mono-fallback
        Description: Fifine Microphone Mono
        Driver: module-alsa-card.c
        Sample Specification: s16le 1ch 44100Hz
        Channel Map: mono
        Owner Module: 8
        Mute: no
        Volume: mono: 65360 / 100% / -0,07 dB
                balance 0,00
        Base Volume: 19944 /  30% / -31,00 dB
        Monitor of Sink: n/a
        Latency: 0 usec, configured 0 usec
        Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
        Properties:
                alsa.resolution_bits = "16"
                device.api = "alsa"
                device.class = "sound"
                alsa.class = "generic"
                alsa.subclass = "generic-mix"
                alsa.name = "USB Audio"
                alsa.id = "USB Audio"
                alsa.subdevice = "0"
                alsa.subdevice_name = "subdevice #0"
                alsa.device = "0"
                alsa.card = "2"
                alsa.card_name = "Fifine Microphone"
                alsa.long_card_name = "Fifine Microphone at usb-0000:00:1d.0-1.2, full speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/sound/card2"
                udev.id = "usb-3142_Fifine_Microphone-00"
                device.bus = "usb"
                device.vendor.id = "3142"
                device.vendor.name = "3142"
                device.product.id = "5060"
                device.product.name = "Fifine Microphone"
                device.serial = "3142_Fifine_Microphone"
                device.form_factor = "microphone"
                device.string = "hw:2"
                device.buffering.buffer_size = "176400"
                device.buffering.fragment_size = "88200"
                device.access_mode = "mmap+timer"
                device.profile.name = "mono-fallback"
                device.profile.description = "Mono"
                device.description = "Fifine Microphone Mono"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-input-microphone-usb"
        Ports:
                analog-input-mic: Microphone (type: Mic, priority: 8700, availability unknown)
        Active Port: analog-input-mic
        Formats:
                pcm
null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pipewire
    PipeWire Sound Server
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
    HDA Intel PCH, ALC662 rev1 Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC662 rev1 Analog
    Front output / input
usbstream:CARD=PCH
    HDA Intel PCH
    USB Stream Output
usbstream:CARD=NVidia
    HDA NVidia
    USB Stream Output
sysdefault:CARD=Microphone
    Fifine Microphone, USB Audio
    Default Audio Device
front:CARD=Microphone,DEV=0
    Fifine Microphone, USB Audio
    Front output / input
usbstream:CARD=Microphone
    Fifine Microphone
    USB Stream Output
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 2: ALC662 rev1 Alt Analog [ALC662 rev1 Alt Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: Microphone [Fifine Microphone], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
[heso@heso-x79g ~]$

Offline

#7 Today 13:27:25

jogeso2305
Member
Registered: 2025-05-23
Posts: 5

Re: No sound input from Fifine USB microphone in Telegram and PulseAudio

Hi.

Any ideas?

Offline

#8 Today 17:08:16

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,479

Re: No sound input from Fifine USB microphone in Telegram and PulseAudio

Repost these while actively trying to record something, detection wise things look fine. FWIW these outputs suggest you are not actually running on pipewire but plain pulseaudio. If you actually want to use pipewire for everything I suggest you install wireplumber in lieu of pipewire-media-session and pipewire-pulse instead of pulseaudio.

Offline

Pages: 1

Board footer

Powered by FluxBB