Arch Linux

Lupus1024

Member

Registered: 2025-07-08

Posts: 2

Cant get audio through pipewire

So I use my monitor audio because my motherboard jack stopped working a while ago and its always worked on windows, but i switched to Linux and now it doesn't work, after trying a few fixes nothing has worked, audio is present and recognized it just wont go to my headphones, Any ideas on how to fix this?

V1del

Forum Moderator

Registered: 2012-10-16

Posts: 25,153

Re: Cant get audio through pipewire

Post the outputs of

aplay -lL
sudo fuser -v /dev/snd/*
systemctl --user status pipewire{,-pulse} wireplumber pulseaudio
amixer -c0 #Or whatever index corresponds to your integrated card from aplay -l
pactl list cards
pactl list sinks

in  [code][/code] tags

euromatlox

Member

Registered: 2017-02-10

Posts: 149

Re: Cant get audio through pipewire

Have you read (and tried) ALSA section (alsa-utils) ?

Last edited by euromatlox (2025-07-08 13:42:13)

Lupus1024

Member

Registered: 2025-07-08

Posts: 2

Re: Cant get audio through pipewire

[[lupus@archlinux ~]$ aplay -IL
bash: aplay: command not found
[lupus@archlinux ~]$ sudo fuser -v /dev/snd/*
[sudo] password for lupus:
                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  lupus      1231 F.... wireplumber
/dev/snd/controlC1:  lupus      1231 F.... wireplumber
/dev/snd/controlC2:  lupus      1231 F.... wireplumber
/dev/snd/seq:        lupus      1230 F.... pipewire
[lupus@archlinux ~]$ systemctl --user status pipewire{,-pulse} wireplumber pulseaudio
Unit pulseaudio.service could not be found.
● pipewire.service - PipeWire Multimedia Service
     Loaded: loaded (/usr/lib/systemd/user/pipewire.service; disabled; preset: enabled)
     Active: active (running) since Tue 2025-07-08 23:28:53 UTC; 3min 9s ago
Invocation: 2a2a7695d9da4340ba082381798c9093
TriggeredBy: ● pipewire.socket
   Main PID: 1230 (pipewire)
      Tasks: 3 (limit: 18917)
     Memory: 6.3M (peak: 8.1M)
        CPU: 57ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire.service
             └─1230 /usr/bin/pipewire

Jul 08 23:28:53 archlinux systemd[1219]: Started PipeWire Multimedia Service.

● pipewire-pulse.service - PipeWire PulseAudio
     Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; enabled; preset: enabled)
     Active: active (running) since Tue 2025-07-08 23:28:53 UTC; 3min 9s ago
Invocation: 174b195892174b249d04f302c4565ed4
TriggeredBy: ● pipewire-pulse.socket
   Main PID: 1233 (pipewire-pulse)
      Tasks: 3 (limit: 18917)
     Memory: 8.1M (peak: 9M)
        CPU: 26ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/pipewire-pulse.service
             └─1233 /usr/bin/pipewire-pulse

Jul 08 23:28:53 archlinux systemd[1219]: Started PipeWire PulseAudio.

● wireplumber.service - Multimedia Service Session Manager
     Loaded: loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset: enabled)
     Active: active (running) since Tue 2025-07-08 23:28:53 UTC; 3min 9s ago
Invocation: de960bd0787c425a8824bcba64702f2e
   Main PID: 1231 (wireplumber)
      Tasks: 6 (limit: 18917)
     Memory: 6.4M (peak: 8.3M)
        CPU: 181ms
     CGroup: /user.slice/user-1000.slice/user@1000.service/session.slice/wireplumber.service
             └─1231 /usr/bin/wireplumber

Jul 08 23:28:53 archlinux systemd[1219]: Started Multimedia Service Session Manager.
Jul 08 23:28:53 archlinux wireplumber[1231]: wp-device: SPA handle 'api.libcamera.enum.manager' could not be loaded; is it installed?
Jul 08 23:28:53 archlinux wireplumber[1231]: s-monitors-libcamera: PipeWire's libcamera SPA plugin is missing or broken. Some camera types may not be supported.
Jul 08 23:28:54 archlinux wireplumber[1231]: spa.bluez5: BlueZ system service is not available
[lupus@archlinux ~]$ pactl list cards
Card #50
    Name: alsa_card.usb-0c76_USB_PnP_Audio_Device-00
    Driver: alsa
    Owner Module: n/a
    Properties:
        api.acp.auto-port = "false"
        api.acp.auto-profile = "false"
        api.alsa.card = "0"
        api.alsa.card.longname = "USB PnP Audio Device at usb-0000:02:00.0-5, full speed"
        api.alsa.card.name = "USB PnP Audio Device"
        api.alsa.path = "hw:0"
        api.alsa.split-enable = "true"
        api.alsa.use-acp = "true"
        api.dbus.ReserveDevice1 = "Audio0"
        api.dbus.ReserveDevice1.Priority = "-20"
        device.api = "alsa"
        device.bus = "usb"
        device.bus-id = "usb-0c76_USB_PnP_Audio_Device-00"
        device.bus_path = "pci-0000:02:00.0-usb-0:5:1.0"
        device.description = "USB PnP Audio Device"
        device.enum.api = "udev"
        device.icon_name = "audio-card-analog-usb"
        device.name = "alsa_card.usb-0c76_USB_PnP_Audio_Device-00"
        device.nick = "USB PnP Audio Device"
        device.plugged.usec = "5870406"
        device.product.id = "0x161e"
        device.product.name = "USB PnP Audio Device"
        device.serial = "0c76_USB_PnP_Audio_Device"
        device.subsystem = "sound"
        sysfs.path = "/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.0/sound/card0"
        device.vendor.id = "0x0c76"
        device.vendor.name = "JMTek, LLC."
        media.class = "Audio/Device"
        spa.object.id = "2"
        factory.id = "15"
        client.id = "46"
        object.id = "50"
        object.serial = "50"
        object.path = "alsa:acp:Device"
        alsa.card = "0"
        alsa.card_name = "USB PnP Audio Device"
        alsa.long_card_name = "USB PnP Audio Device at usb-0000:02:00.0-5, full speed"
        alsa.driver_name = "snd_usb_audio"
        alsa.mixer_name = "USB Mixer"
        alsa.components = "USB0c76:161e"
        alsa.id = "Device"
        device.string = "0"
    Profiles:
        off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        pro-audio: Pro Audio (sinks: 0, sources: 1, priority: 1, available: yes)
        input:mono-fallback: Mono Input (sinks: 0, sources: 1, priority: 1, available: yes)
    Active Profile: input:mono-fallback
    Ports:
        analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
            Properties:
                port.type = "mic"
                device.icon_name = "audio-input-microphone"
                card.profile.port = "0"
            Part of profile(s): input:mono-fallback

Card #51
    Name: alsa_card.pci-0000_2d_00.4
    Driver: alsa
    Owner Module: n/a
    Properties:
        api.acp.auto-port = "false"
        api.acp.auto-profile = "false"
        api.alsa.card = "2"
        api.alsa.card.longname = "HD-Audio Generic at 0xfc400000 irq 62"
        api.alsa.card.name = "HD-Audio Generic"
        api.alsa.path = "hw:2"
        api.alsa.split-enable = "true"
        api.alsa.use-acp = "true"
        api.dbus.ReserveDevice1 = "Audio2"
        api.dbus.ReserveDevice1.Priority = "-20"
        device.api = "alsa"
        device.bus = "pci"
        device.bus_path = "pci-0000:2d:00.4"
        device.description = "Starship/Matisse HD Audio Controller"
        device.enum.api = "udev"
        device.icon_name = "audio-card-analog-pci"
        device.name = "alsa_card.pci-0000_2d_00.4"
        device.nick = "HD-Audio Generic"
        device.plugged.usec = "5881318"
        device.product.id = "0x1487"
        device.product.name = "Starship/Matisse HD Audio Controller"
        device.subsystem = "sound"
        sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:2d:00.4/sound/card2"
        device.vendor.id = "0x1022"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
        media.class = "Audio/Device"
        spa.object.id = "6"
        factory.id = "15"
        client.id = "46"
        object.id = "51"
        object.serial = "51"
        object.path = "alsa:acp:Generic"
        alsa.card = "2"
        alsa.card_name = "HD-Audio Generic"
        alsa.long_card_name = "HD-Audio Generic at 0xfc400000 irq 62"
        alsa.driver_name = "snd_hda_intel"
        alsa.mixer_name = "Realtek ALC897"
        alsa.components = "HDA:10ec0897,14627c91,00100402"
        alsa.id = "Generic"
        device.string = "2"
    Profiles:
        off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: no)
        output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: no)
        output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
        output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
        output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
        output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
        output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1365, available: no)
        output:analog-surround-21: Analog Surround 2.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
        output:analog-surround-41: Analog Surround 4.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
        output:analog-surround-51: Analog Surround 5.1 Output (sinks: 1, sources: 0, priority: 1300, available: no)
        output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
        output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 1265, available: no)
        output:analog-surround-40: Analog Surround 4.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
        output:analog-surround-50: Analog Surround 5.0 Output (sinks: 1, sources: 0, priority: 1200, available: no)
        input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: no)
        pro-audio: Pro Audio (sinks: 2, sources: 2, priority: 1, available: yes)
    Active Profile: output:iec958-stereo
    Ports:
        analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, not available)
            Properties:
                port.type = "mic"
                port.availability-group = "Legacy 1"
                device.icon_name = "audio-input-microphone"
                card.profile.port = "0"
            Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
        analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, not available)
            Properties:
                port.type = "mic"
                port.availability-group = "Legacy 2"
                device.icon_name = "audio-input-microphone"
                card.profile.port = "1"
            Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
        analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
            Properties:
                port.type = "line"
                port.availability-group = "Legacy 3"
                card.profile.port = "2"
            Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
        analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, not available)
            Properties:
                port.type = "line"
                port.availability-group = "Legacy 4"
                card.profile.port = "3"
            Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
        analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, not available)
            Properties:
                port.type = "headphones"
                port.availability-group = "Legacy 5"
                device.icon_name = "audio-headphones"
                card.profile.port = "4"
            Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
        iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
            Properties:
                port.type = "spdif"
                card.profile.port = "5"
            Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo

Card #52
    Name: alsa_card.pci-0000_2b_00.1
    Driver: alsa
    Owner Module: n/a
    Properties:
        api.acp.auto-port = "false"
        api.acp.auto-profile = "false"
        api.alsa.card = "1"
        api.alsa.card.longname = "HDA NVidia at 0xfc080000 irq 60"
        api.alsa.card.name = "HDA NVidia"
        api.alsa.path = "hw:1"
        api.alsa.split-enable = "true"
        api.alsa.use-acp = "true"
        api.dbus.ReserveDevice1 = "Audio1"
        api.dbus.ReserveDevice1.Priority = "-20"
        device.api = "alsa"
        device.bus = "pci"
        device.bus_path = "pci-0000:2b:00.1"
        device.description = "GA104 High Definition Audio Controller"
        device.enum.api = "udev"
        device.icon_name = "audio-card-analog-pci"
        device.name = "alsa_card.pci-0000_2b_00.1"
        device.nick = "HDA NVidia"
        device.plugged.usec = "5838328"
        device.product.id = "0x228b"
        device.product.name = "GA104 High Definition Audio Controller"
        device.subsystem = "sound"
        sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:2b:00.1/sound/card1"
        device.vendor.id = "0x10de"
        device.vendor.name = "NVIDIA Corporation"
        media.class = "Audio/Device"
        spa.object.id = "4"
        factory.id = "15"
        client.id = "46"
        object.id = "52"
        object.serial = "52"
        object.path = "alsa:acp:NVidia"
        alsa.card = "1"
        alsa.card_name = "HDA NVidia"
        alsa.long_card_name = "HDA NVidia at 0xfc080000 irq 60"
        alsa.driver_name = "snd_hda_intel"
        alsa.mixer_name = "Nvidia GPU 9e HDMI/DP"
        alsa.components = "HDA:10de009e,104387d8,00100100"
        alsa.id = "NVidia"
        device.string = "1"
    Profiles:
        off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
        output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: yes)
        output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: yes)
        output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
        output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
        output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
        output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
        output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
        output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
        pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
    Active Profile: output:hdmi-stereo
    Ports:
        hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, available)
            Properties:
                port.type = "hdmi"
                port.availability-group = "Legacy 1"
                device.icon_name = "video-display"
                card.profile.port = "0"
                device.product.name = "DELL AW2523HF"
                iec958.codecs.detected = "[\"PCM\"]"
            Part of profile(s): output:hdmi-stereo
        hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, available)
            Properties:
                port.type = "hdmi"
                port.availability-group = "Legacy 2"
                device.icon_name = "video-display"
                card.profile.port = "1"
                device.product.name = "DELL AW2518HF"
                iec958.codecs.detected = "[\"PCM\"]"
            Part of profile(s): output:hdmi-stereo-extra1
        hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
            Properties:
                port.type = "hdmi"
                port.availability-group = "Legacy 3"
                device.icon_name = "video-display"
                card.profile.port = "2"
            Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
        hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
            Properties:
                port.type = "hdmi"
                port.availability-group = "Legacy 4"
                device.icon_name = "video-display"
                card.profile.port = "3"
            Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
[lupus@archlinux ~]$ pactl list sinks
Sink #57
    State: SUSPENDED
    Name: alsa_output.pci-0000_2d_00.4.iec958-stereo
    Description: Starship/Matisse HD Audio Controller Digital Stereo (IEC958)
    Driver: PipeWire
    Sample Specification: s32le 2ch 48000Hz
    Channel Map: front-left,front-right
    Owner Module: 4294967295
    Mute: no
    Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_2d_00.4.iec958-stereo.monitor
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY SET_FORMATS
    Properties:
        alsa.card = "2"
        alsa.card_name = "HD-Audio Generic"
        alsa.class = "generic"
        alsa.components = "HDA:10ec0897,14627c91,00100402"
        alsa.device = "1"
        alsa.driver_name = "snd_hda_intel"
        alsa.id = "ALC897 Digital"
        alsa.long_card_name = "HD-Audio Generic at 0xfc400000 irq 62"
        alsa.mixer_name = "Realtek ALC897"
        alsa.name = "ALC897 Digital"
        alsa.resolution_bits = "16"
        alsa.subclass = "generic-mix"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.sync.id = "00000000:00000000:00000000:00000000"
        api.alsa.card.longname = "HD-Audio Generic at 0xfc400000 irq 62"
        api.alsa.card.name = "HD-Audio Generic"
        api.alsa.path = "iec958:2"
        api.alsa.pcm.card = "2"
        api.alsa.pcm.stream = "playback"
        audio.channels = "2"
        audio.position = "FL,FR"
        card.profile.device = "11"
        device.api = "alsa"
        device.class = "sound"
        device.icon_name = "audio-card-analog"
        device.id = "51"
        device.profile.description = "Digital Stereo (IEC958)"
        device.profile.name = "iec958-stereo"
        device.routes = "1"
        factory.name = "api.alsa.pcm.sink"
        media.class = "Audio/Sink"
        device.description = "Starship/Matisse HD Audio Controller"
        node.name = "alsa_output.pci-0000_2d_00.4.iec958-stereo"
        node.nick = "ALC897 Digital"
        node.pause-on-idle = "false"
        object.path = "alsa:acp:Generic:11:playback"
        port.group = "playback"
        priority.driver = "736"
        priority.session = "736"
        factory.id = "19"
        clock.quantum-limit = "8192"
        client.id = "46"
        node.driver = "true"
        node.loop.name = "data-loop.0"
        library.name = "audioconvert/libspa-audioconvert"
        object.id = "57"
        object.serial = "57"
        api.acp.auto-port = "false"
        api.acp.auto-profile = "false"
        api.alsa.card = "2"
        api.alsa.split-enable = "true"
        api.alsa.use-acp = "true"
        api.dbus.ReserveDevice1 = "Audio2"
        api.dbus.ReserveDevice1.Priority = "-20"
        device.bus = "pci"
        device.bus_path = "pci-0000:2d:00.4"
        device.enum.api = "udev"
        device.name = "alsa_card.pci-0000_2d_00.4"
        device.nick = "HD-Audio Generic"
        device.plugged.usec = "5881318"
        device.product.id = "0x1487"
        device.product.name = "Starship/Matisse HD Audio Controller"
        device.subsystem = "sound"
        sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:2d:00.4/sound/card2"
        device.vendor.id = "0x1022"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
        spa.object.id = "6"
        device.string = "2"
    Ports:
        iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, availability unknown)
    Active Port: iec958-stereo-output
    Formats:
        pcm

Sink #73
    State: SUSPENDED
    Name: alsa_output.pci-0000_2b_00.1.hdmi-stereo
    Description: GA104 High Definition Audio Controller Digital Stereo (HDMI)
    Driver: PipeWire
    Sample Specification: s32le 2ch 48000Hz
    Channel Map: front-left,front-right
    Owner Module: 4294967295
    Mute: no
    Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_2b_00.1.hdmi-stereo.monitor
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
    Properties:
        alsa.card = "1"
        alsa.card_name = "HDA NVidia"
        alsa.class = "generic"
        alsa.components = "HDA:10de009e,104387d8,00100100"
        alsa.device = "3"
        alsa.driver_name = "snd_hda_intel"
        alsa.id = "HDMI 0"
        alsa.long_card_name = "HDA NVidia at 0xfc080000 irq 60"
        alsa.mixer_name = "Nvidia GPU 9e HDMI/DP"
        alsa.name = "DELL AW2523HF"
        alsa.resolution_bits = "16"
        alsa.subclass = "generic-mix"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.sync.id = "00000000:00000000:00000000:00000000"
        api.alsa.card.longname = "HDA NVidia at 0xfc080000 irq 60"
        api.alsa.card.name = "HDA NVidia"
        api.alsa.path = "hdmi:1"
        api.alsa.pcm.card = "1"
        api.alsa.pcm.stream = "playback"
        audio.channels = "2"
        audio.position = "FL,FR"
        card.profile.device = "4"
        device.api = "alsa"
        device.class = "sound"
        device.icon_name = "audio-card-analog"
        device.id = "52"
        device.profile.description = "Digital Stereo (HDMI)"
        device.profile.name = "hdmi-stereo"
        device.routes = "1"
        factory.name = "api.alsa.pcm.sink"
        iec958.codecs = "[\"PCM\"]"
        media.class = "Audio/Sink"
        device.description = "GA104 High Definition Audio Controller"
        node.name = "alsa_output.pci-0000_2b_00.1.hdmi-stereo"
        node.nick = "DELL AW2523HF"
        node.pause-on-idle = "false"
        object.path = "alsa:acp:NVidia:4:playback"
        port.group = "playback"
        priority.driver = "696"
        priority.session = "696"
        factory.id = "19"
        clock.quantum-limit = "8192"
        client.id = "46"
        node.driver = "true"
        node.loop.name = "data-loop.0"
        library.name = "audioconvert/libspa-audioconvert"
        object.id = "33"
        object.serial = "73"
        api.acp.auto-port = "false"
        api.acp.auto-profile = "false"
        api.alsa.card = "1"
        api.alsa.split-enable = "true"
        api.alsa.use-acp = "true"
        api.dbus.ReserveDevice1 = "Audio1"
        api.dbus.ReserveDevice1.Priority = "-20"
        device.bus = "pci"
        device.bus_path = "pci-0000:2b:00.1"
        device.enum.api = "udev"
        device.name = "alsa_card.pci-0000_2b_00.1"
        device.nick = "HDA NVidia"
        device.plugged.usec = "5838328"
        device.product.id = "0x228b"
        device.product.name = "GA104 High Definition Audio Controller"
        device.subsystem = "sound"
        sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:2b:00.1/sound/card1"
        device.vendor.id = "0x10de"
        device.vendor.name = "NVIDIA Corporation"
        spa.object.id = "4"
        device.string = "1"
    Ports:
        hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
    Active Port: hdmi-output-0
    Formats:
        pcm]

i think i did the code tags rigfht but im sorry if i didnt

euromatlox

Member

Registered: 2017-02-10

Posts: 149

Re: Cant get audio through pipewire

Usually I have solved my audio problems like this:
- run commandline app alsamixer and set enough volume.
- select correct audio port from pavucontrol (icon on screen top right) and set enough volume
(sometimes audio port has somehow been replaced magically)

The code tags should be used so, that you write (code)copypaste(/code). (Replace correct brackets).

Here is copy pasted row1
Here is copy pasted row2

Last edited by euromatlox (2025-07-10 21:15:58)