Since a recent update, my external luks hdd unmount after boot

pepper · 2025-07-09 21:27:39

My external disks are correctly decrypted and mounted after boot, but a couple of them unmount approximately 2-3 minutes later. The disks are healthy (S.M.A.R.T. tests pass and they work on other operating systems), so the issue seems to occur only after booting on this machine.
I use xfce, xorg and 6.12.36-1-lts kernel, the following setup is my setup, which has worked for years.. until the last update:

cat /etc/mkinitcpio.conf

# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES=(piix ide_disk reiserfs)
MODULES=()

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image.  This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=()

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way.  This is useful for config files.
FILES=()

# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
##   This setup specifies all modules in the MODULES setting above.
##   No raid, lvm2, or encrypted root is needed.
#    HOOKS=(base)
#
##   This setup will autodetect all modules for your system and should
##   work as a sane default
#    HOOKS=(base udev autodetect block filesystems)
#
##   This setup will generate a 'full' image which supports most systems.
##   No autodetection is done.
#    HOOKS=(base udev block filesystems)
#
##   This setup assembles a pata mdadm array with an encrypted root FS.
##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
#    HOOKS=(base udev block mdadm encrypt filesystems)
#
##   This setup loads an lvm2 volume group on a usb device.
#    HOOKS=(base udev block lvm2 filesystems)
#
##   NOTE: If you have /usr on a separate partition, you MUST include the
#    usr, fsck and shutdown hooks.
HOOKS=(base udev autodetect keyboard keymap modconf block encrypt lvm2 filesystems fsck)

# COMPRESSION
# Use this to compress the initramfs image. By default, zstd compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="zstd"
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"

# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=()

Errors after boot: sudo journalctl -b -p err

lug 09 23:08:27 mulo kernel: x86/cpu: SGX disabled or unsupported by BIOS.
lug 09 23:08:27 mulo kernel: scsi 2:0:0:1: Failed to get diagnostic page 0x1
lug 09 23:08:27 mulo kernel: scsi 2:0:0:1: Failed to bind enclosure -19
lug 09 23:08:38 mulo systemd[1]: Failed to start Refresh Pacman mirrorlist with Reflector..
lug 09 23:09:06 mulo kernel: Buffer I/O error on dev dm-4, logical block 30965760, lost sync page write
lug 09 23:09:06 mulo kernel: JBD2: I/O error when updating journal superblock for dm-4-8.
lug 09 23:09:06 mulo kernel: Aborting journal on device dm-4-8.
lug 09 23:09:06 mulo kernel: Buffer I/O error on dev dm-4, logical block 30965760, lost sync page write
lug 09 23:09:06 mulo kernel: JBD2: I/O error when updating journal superblock for dm-4-8.
lug 09 23:09:06 mulo kernel: EXT4-fs error (device dm-4): ext4_put_super:1318: comm umount: Couldn't clean up the journal
lug 09 23:09:06 mulo kernel: Buffer I/O error on dev dm-4, logical block 0, lost sync page write
lug 09 23:09:06 mulo kernel: EXT4-fs (dm-4): I/O error while writing superblock
lug 09 23:09:06 mulo kernel: EXT4-fs (dm-4): Remounting filesystem read-only
lug 09 23:09:06 mulo kernel: Buffer I/O error on dev dm-4, logical block 0, lost sync page write
lug 09 23:09:06 mulo kernel: EXT4-fs (dm-4): I/O error while writing superblock
lug 09 23:09:06 mulo systemd-cryptsetup[1760]: device-mapper: remove ioctl on luks-00d46560-89a9-4027-93d5-71fa2c8e247e  failed: Device or resource busy
lug 09 23:09:57 mulo systemd[1]: Timed out waiting for device /dev/disk/by-uuid/6401ad98-a5cf-4ccd-bc97-90d098f9368f.
lug 09 23:09:57 mulo systemd[1]: Timed out waiting for device /dev/disk/by-uuid/a7818834-7865-407a-b44f-53fcb81be83d.
lug 09 23:10:43 mulo systemd-cryptsetup[2012]: device-mapper: remove ioctl on luks-daa95dca-bdba-4e23-ac42-5e9cc33053bc  failed: Device or resource busy
lug 09 23:10:43 mulo kernel: Buffer I/O error on dev dm-3, logical block 0, lost sync page write
lug 09 23:10:43 mulo kernel: EXT4-fs (dm-3): I/O error while writing superblock

Disks: lsblk -o NAME,SIZE,FSTYPE,UUID,MOUNTPOINT
sdb1 and sdc1 are the unmounted disks

NAME                                            SIZE FSTYPE      UUID                                   MOUNTPOINT
sda                                           232,9G                                                    
├─sda1                                          488M vfat        BD2A-C15F                              /boot
└─sda2                                        232,4G crypto_LUKS 0f527340-6ad3-4f76-a081-a398e7c937f1   
  └─encrypted_lvm                             232,4G LVM2_member MagB7d-58iZ-lkDB-S7M8-GS1G-T8t2-8a8mHD 
    └─volgroup_0-lv_root                      232,4G ext4        16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12   /
sdb                                           238,5G                                                    
└─sdb1                                        238,5G crypto_LUKS 00d46560-89a9-4027-93d5-71fa2c8e247e   
sdc                                           931,5G                                                    
└─sdc1                                        931,5G crypto_LUKS daa95dca-bdba-4e23-ac42-5e9cc33053bc   
sdd                                           931,5G                                                    
└─sdd1                                        931,5G crypto_LUKS c561c919-b617-492a-830c-74ababade132   
  └─luks-c561c919-b617-492a-830c-74ababade132 931,5G ext4        e10ab897-b1af-45c8-bb93-9a85d0561900   /media/main/temp 1TB
sde                                             3,6T                                                    
└─sde1                                          3,6T crypto_LUKS dad2d9f0-d032-4959-a92a-b15945b9867b   
  └─luks-dad2d9f0-d032-4959-a92a-b15945b9867b   3,6T ext4        d405b74f-f22e-4973-86de-a17460f2b1af   /media/main/HD

Mounting: cat /etc/fstab

# Static information about the filesystems.
# See fstab(5) for details.

# <file system> <dir> <type> <options> <dump> <pass>
# /dev/mapper/volgroup_0-lv_root
UUID=16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12	/         	ext4      	rw,relatime	0 1

# /dev/sda1
UUID=BD2A-C15F      	/boot     	vfat      	rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro	0 2

UUID=e10ab897-b1af-45c8-bb93-9a85d0561900 /media/main/temp\0401TB auto defaults,nosuid,nodev,nofail,x-gvfs-show 0 0
UUID=245c388e-dec5-4ba7-adf9-c4da95835a16 /media/main/musica1TB auto defaults,nosuid,nodev,nofail,x-gvfs-show 0 0
UUID=d405b74f-f22e-4973-86de-a17460f2b1af /media/main/HD auto defaults,nosuid,nodev,nofail,x-gvfs-show 0 0
UUID=a7818834-7865-407a-b44f-53fcb81be83d /media/main/BackupMulo auto defaults,nosuid,nodev,nofail,x-gvfs-show 0 0
UUID=9f40d3cb-e5ce-4877-bf27-e57d966cd4a4 /media/main/Backups auto defaults,nosuid,nodev,nofail,x-gvfs-show 0 0

Luks: cat /etc/crypttab

luks-dad2d9f0-d032-4959-a92a-b15945b9867b UUID=dad2d9f0-d032-4959-a92a-b15945b9867b /etc/luks-keys/luks-dad2d9f0-d032-4959-a92a-b15945b9867b nofail,x-udisks-auth
luks-daa95dca-bdba-4e23-ac42-5e9cc33053bc UUID=daa95dca-bdba-4e23-ac42-5e9cc33053bc /etc/luks-keys/luks-daa95dca-bdba-4e23-ac42-5e9cc33053bc nofail,x-udisks-auth
luks-c561c919-b617-492a-830c-74ababade132 UUID=c561c919-b617-492a-830c-74ababade132 /etc/luks-keys/luks-c561c919-b617-492a-830c-74ababade132 nofail,x-udisks-auth
luks-6401ad98-a5cf-4ccd-bc97-90d098f9368f UUID=6401ad98-a5cf-4ccd-bc97-90d098f9368f /etc/luks-keys/luks-6401ad98-a5cf-4ccd-bc97-90d098f9368f nofail,x-udisks-auth
luks-00d46560-89a9-4027-93d5-71fa2c8e247e UUID=00d46560-89a9-4027-93d5-71fa2c8e247e /etc/luks-keys/luks-00d46560-89a9-4027-93d5-71fa2c8e247e nofail,x-udisks-auth

I waited 10 minutes after boot, I manually mounted them, they worked for some minutes, then the problem comes back and disk are auto-unmounted

Last edited by pepper (2025-07-09 21:56:05)

-thc · 2025-07-10 06:19:24

Path 1; Analyze your journal

sudo journalctl -b -1 -p err
sudo journalctl -b -2 -p err
sudo journalctl -b -3 -p err
sudo journalctl -b -4 -p err
...

and correlate this with the update history

cat /var/log/pacman.log | grep upgraded

to pinpoint a possible upgrade issue (kernel, lvm).

Path 2: The common cause for the failure could be a faulty USB bus. Do both failing devices share an USB bus? What happens if you only activate one of them and not the other?

Last edited by -thc (2025-07-10 06:21:29)

pepper · 2025-07-10 06:57:18

Part1:
I can't find where is the source problem or correlate with updates.. maybe this:

EXT4-fs error (device dm-4): ext4_put_super:1318: comm umount: Couldn't clean up the journal

or this.. (I don't know these issues):

JBD2: I/O error when updating journal superblock for dm-4-8.

Part2:
It's not an hardware problem because if I downgrade the os with timeshift, the problems fully disappear. Maybe it's related with new kernel version?

cat /var/log/pacman.log | grep upgraded

[2025-07-09T22:25:30+0200] [ALPM] upgraded linux-firmware-whence (20241210.b00a7f7e-1 -> 20250627-1)
[2025-07-09T22:25:32+0200] [ALPM] upgraded linux-api-headers (6.10-1 -> 6.15-1)
[2025-07-09T22:25:32+0200] [ALPM] upgraded tzdata (2024b-2 -> 2025b-1)
[2025-07-09T22:25:32+0200] [ALPM] upgraded iana-etc (20241206-1 -> 20250612-1)
[2025-07-09T22:25:32+0200] [ALPM] upgraded filesystem (2024.11.21-1 -> 2025.05.03-1)
[2025-07-09T22:25:32+0200] [ALPM] upgraded glibc (2.40+r16+gaa533d58ff-2 -> 2.41+r48+g5cb575ca9a3d-1)
[2025-07-09T22:25:36+0200] [ALPM] upgraded gcc-libs (14.2.1+r134+gab884fffe3fc-1 -> 15.1.1+r7+gf36ec88aa85a-1)
[2025-07-09T22:25:36+0200] [ALPM] upgraded gtest (1.15.2-1 -> 1.17.0-1)
[2025-07-09T22:25:36+0200] [ALPM] upgraded abseil-cpp (20240722.0-1 -> 20250512.1-1)
[2025-07-09T22:25:36+0200] [ALPM] upgraded adwaita-cursors (47.0-1 -> 48.1-1)
[2025-07-09T22:25:36+0200] [ALPM] upgraded adwaita-icon-theme (47.0-1 -> 48.1-1)
[2025-07-09T22:25:37+0200] [ALPM] upgraded alsa-ucm-conf (1.2.13-2 -> 1.2.14-2)
[2025-07-09T22:25:37+0200] [ALPM] upgraded alsa-lib (1.2.13-1 -> 1.2.14-1)
[2025-07-09T22:25:37+0200] [ALPM] upgraded libupnp (1.14.20-1 -> 1.14.24-1)
[2025-07-09T22:25:37+0200] [ALPM] upgraded ncurses (6.5-3 -> 6.5-4)
[2025-07-09T22:25:37+0200] [ALPM] upgraded readline (8.2.013-1 -> 8.2.013-2)
[2025-07-09T22:25:38+0200] [ALPM] upgraded bash (5.2.037-1 -> 5.2.037-5)
[2025-07-09T22:25:38+0200] [ALPM] upgraded expat (2.6.4-1 -> 2.7.1-1)
[2025-07-09T22:25:38+0200] [ALPM] upgraded brotli (1.1.0-2 -> 1.1.0-3)
[2025-07-09T22:25:38+0200] [ALPM] upgraded libpng (1.6.44-1 -> 1.6.50-1)
[2025-07-09T22:25:38+0200] [ALPM] upgraded libffi (3.4.6-1 -> 3.5.1-1)
[2025-07-09T22:25:38+0200] [ALPM] upgraded libsysprof-capture (47.2-1 -> 48.0-5)
[2025-07-09T22:25:38+0200] [ALPM] upgraded pcre2 (10.44-1 -> 10.45-1)
[2025-07-09T22:25:38+0200] [ALPM] upgraded sqlite (3.47.2-1 -> 3.50.2-1)
[2025-07-09T22:25:38+0200] [ALPM] upgraded util-linux-libs (2.40.2-1 -> 2.41.1-1)
[2025-07-09T22:25:38+0200] [ALPM] upgraded glib2 (2.82.4-1 -> 2.84.3-1)
[2025-07-09T22:25:38+0200] [ALPM] upgraded harfbuzz (10.1.0-1 -> 11.2.1-1)
[2025-07-09T22:25:38+0200] [ALPM] upgraded freetype2 (2.13.3-1 -> 2.13.3-3)
[2025-07-09T22:25:39+0200] [ALPM] upgraded fontconfig (2:2.15.0-2 -> 2:2.17.1-1)
[2025-07-09T22:25:45+0200] [ALPM] upgraded xcb-proto (1.17.0-2 -> 1.17.0-3)
[2025-07-09T22:25:45+0200] [ALPM] upgraded libx11 (1.8.10-1 -> 1.8.12-1)
[2025-07-09T22:25:45+0200] [ALPM] upgraded pixman (0.44.2-1 -> 0.46.2-1)
[2025-07-09T22:25:45+0200] [ALPM] upgraded cairo (1.18.2-2 -> 1.18.4-1)
[2025-07-09T22:25:45+0200] [ALPM] upgraded e2fsprogs (1.47.1-4 -> 1.47.2-2)
[2025-07-09T22:25:46+0200] [ALPM] upgraded openssl (3.4.0-1 -> 3.5.1-1)
[2025-07-09T22:25:46+0200] [ALPM] upgraded gdbm (1.24-1 -> 1.25-1)
[2025-07-09T22:25:46+0200] [ALPM] upgraded libldap (2.6.9-1 -> 2.6.10-1)
[2025-07-09T22:25:46+0200] [ALPM] upgraded krb5 (1.21.3-1 -> 1.21.3-2)
[2025-07-09T22:25:46+0200] [ALPM] upgraded libcap-ng (0.8.5-2 -> 0.8.5-3)
[2025-07-09T22:25:46+0200] [ALPM] upgraded audit (4.0.2-2 -> 4.0.5-1)
[2025-07-09T22:25:46+0200] [ALPM] upgraded libxcrypt (4.4.36-2 -> 4.4.38-1)
[2025-07-09T22:25:46+0200] [ALPM] upgraded libtirpc (1.3.6-1 -> 1.3.6-2)
[2025-07-09T22:25:46+0200] [ALPM] upgraded libgpg-error (1.51-1 -> 1.55-1)
[2025-07-09T22:25:46+0200] [ALPM] upgraded libgcrypt (1.11.0-2 -> 1.11.1-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded xz (5.6.3-1 -> 5.8.1-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded zstd (1.5.6-1 -> 1.5.7-2)
[2025-07-09T22:25:47+0200] [ALPM] upgraded systemd-libs (257-1 -> 257.7-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded pam (1.7.0-1 -> 1.7.1-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded libcap (2.71-1 -> 2.76-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded libnghttp2 (1.64.0-1 -> 1.66.0-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded libnghttp3 (1.6.0-1 -> 1.10.1-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded libssh2 (1.11.0-1 -> 1.11.1-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded coreutils (9.5-2 -> 9.7-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded findutils (4.10.0-2 -> 4.10.0-3)
[2025-07-09T22:25:47+0200] [ALPM] upgraded libtasn1 (4.19.0-2 -> 4.20.0-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded ca-certificates-mozilla (3.107-1 -> 3.113.1-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded libunistring (1.2-1 -> 1.3-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded curl (8.11.1-3 -> 8.14.1-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded json-c (0.18-1 -> 0.18-2)
[2025-07-09T22:25:47+0200] [ALPM] upgraded libelf (0.192-2 -> 0.193-2)
[2025-07-09T22:25:47+0200] [ALPM] upgraded libunwind (1.8.1-3 -> 1.8.2-1)
[2025-07-09T22:25:47+0200] [ALPM] upgraded gstreamer (1.24.10-1 -> 1.26.3-2)
[2025-07-09T22:25:48+0200] [ALPM] upgraded iso-codes (4.17.0-1 -> 4.18.0-1)
[2025-07-09T22:25:48+0200] [ALPM] upgraded libdrm (2.4.124-1 -> 2.4.125-1)
[2025-07-09T22:25:48+0200] [ALPM] upgraded libedit (20240517_3.1-1 -> 20250104_3.1-1)
[2025-07-09T22:25:48+0200] [ALPM] upgraded icu (75.1-1 -> 76.1-1)
[2025-07-09T22:25:48+0200] [ALPM] upgraded libxml2 (2.13.5-1 -> 2.14.4-2)
[2025-07-09T22:25:49+0200] [ALPM] upgraded llvm-libs (18.1.8-4 -> 20.1.7-1)
[2025-07-09T22:25:49+0200] [ALPM] upgraded lm_sensors (1:3.6.0.r41.g31d1f125-3 -> 1:3.6.2-1)
[2025-07-09T22:25:49+0200] [ALPM] upgraded spirv-tools (2024.4.rc1-1 -> 1:1.4.313.0-1)
[2025-07-09T22:25:49+0200] [ALPM] upgraded wayland (1.23.1-1 -> 1.23.1-2)
[2025-07-09T22:25:49+0200] [ALPM] upgraded mesa (1:24.3.1-3 -> 1:25.1.5-1)
[2025-07-09T22:25:49+0200] [ALPM] upgraded libglvnd (1.7.0-1 -> 1.7.0-3)
[2025-07-09T22:25:49+0200] [ALPM] upgraded libgudev (238-1 -> 238-3)
[2025-07-09T22:25:49+0200] [ALPM] upgraded libjpeg-turbo (3.0.4-1 -> 3.1.1-1)
[2025-07-09T22:25:49+0200] [ALPM] upgraded orc (0.4.40-1 -> 0.4.41-1)
[2025-07-09T22:25:49+0200] [ALPM] upgraded gst-plugins-base-libs (1.24.10-1 -> 1.26.3-2)
[2025-07-09T22:25:49+0200] [ALPM] upgraded nettle (3.10-1 -> 3.10.2-1)
[2025-07-09T22:25:49+0200] [ALPM] upgraded gnutls (3.8.8-1 -> 3.8.9-1)
[2025-07-09T22:25:49+0200] [ALPM] upgraded gsettings-system-schemas (47.1-1 -> 48.0-1)
[2025-07-09T22:25:49+0200] [ALPM] upgraded libproxy (0.5.9-1 -> 0.5.10-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded glib-networking (1:2.80.0-3 -> 1:2.80.1-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded libsoup3 (3.6.1-1 -> 3.6.5-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded gssdp (1.6.3-2 -> 1.6.4-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded gupnp (1:1.6.7-1 -> 1:1.6.9-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded gupnp-igd (1.6.0-1 -> 1.6.0-2)
[2025-07-09T22:25:50+0200] [ALPM] upgraded libnice (0.1.22-1 -> 0.1.22-2)
[2025-07-09T22:25:50+0200] [ALPM] upgraded libusb (1.0.27-1 -> 1.0.29-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded xkeyboard-config (2.43-1 -> 2.45-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded libxkbcommon (1.7.0-2 -> 1.10.0-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded libxkbcommon-x11 (1.7.0-2 -> 1.10.0-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded vulkan-icd-loader (1.4.303-1 -> 1.4.313.0-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded gst-plugins-bad-libs (1.24.10-1 -> 1.26.3-2)
[2025-07-09T22:25:50+0200] [ALPM] upgraded dbus (1.14.10-2 -> 1.16.2-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded gsettings-desktop-schemas (47.1-1 -> 48.0-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded at-spi2-core (2.54.0-2 -> 2.56.3-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded fribidi (1.0.16-1 -> 1.0.16-2)
[2025-07-09T22:25:50+0200] [ALPM] upgraded libcloudproviders (0.3.6-1 -> 0.3.6-2)
[2025-07-09T22:25:50+0200] [ALPM] upgraded lcms2 (2.16-1 -> 2.17-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded libcolord (1.4.7-2 -> 1.4.8-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded avahi (1:0.8+r194+g3f79789-2 -> 1:0.8+r194+g3f79789-3)
[2025-07-09T22:25:50+0200] [ALPM] upgraded libcups (2:2.4.11-1 -> 2:2.4.12-2)
[2025-07-09T22:25:50+0200] [ALPM] upgraded dav1d (1.5.0-1 -> 1.5.1-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded libxft (2.3.8-2 -> 2.3.9-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded pango (1:1.54.0-1 -> 1:1.56.4-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded shared-mime-info (2.4-1 -> 2.4-2)
[2025-07-09T22:25:50+0200] [ALPM] upgraded librsvg (2:2.59.2-1 -> 2:2.60.0-2)
[2025-07-09T22:25:50+0200] [ALPM] upgraded libstemmer (2.2.0-2 -> 3.0.1-1)
[2025-07-09T22:25:50+0200] [ALPM] upgraded tinysparql (3.8.2-2 -> 3.9.2-2)
[2025-07-09T22:25:50+0200] [ALPM] upgraded gtk-update-icon-cache (1:4.16.7-1 -> 1:4.18.6-1)
[2025-07-09T22:25:51+0200] [ALPM] upgraded gtk3 (1:3.24.43-4 -> 1:3.24.49-2)
[2025-07-09T22:25:51+0200] [ALPM] upgraded libnotify (0.8.3-1 -> 0.8.6-1)
[2025-07-09T22:25:51+0200] [ALPM] upgraded libsm (1.2.5-1 -> 1.2.6-1)
[2025-07-09T22:25:51+0200] [ALPM] upgraded hidapi (0.14.0-3 -> 0.15.0-1)
[2025-07-09T22:25:51+0200] [ALPM] upgraded libsecret (0.21.4-1 -> 0.21.7-1)
[2025-07-09T22:25:51+0200] [ALPM] upgraded wxwidgets-common (3.2.6-1 -> 3.2.8.1-2)
[2025-07-09T22:25:51+0200] [ALPM] upgraded wxwidgets-gtk3 (3.2.6-1 -> 3.2.8.1-2)
[2025-07-09T22:25:51+0200] [ALPM] upgraded geoip-database (20241116-1 -> 20250129-1)
[2025-07-09T22:25:52+0200] [ALPM] upgraded amule (1:2.3.3-9 -> 1:2.3.3-10)
[2025-07-09T22:25:52+0200] [ALPM] upgraded aom (3.11.0-1 -> 3.12.1-1)
[2025-07-09T22:25:52+0200] [ALPM] upgraded mpdecimal (4.0.0-2 -> 4.0.1-1)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python (3.12.7-1 -> 3.13.5-1)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python-certifi (2024.08.30-1 -> 2025.06.15-1)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python-click (8.1.7-3 -> 8.1.8-1)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python-markdown (3.7-1 -> 3.8.2-1)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python-charset-normalizer (3.4.0-1 -> 3.4.2-1)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python-idna (3.10-1 -> 3.10-2)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python-urllib3 (1.26.20-3 -> 2.5.0-1)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python-requests (2.32.3-1 -> 2.32.4-1)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python-pycparser (2.22-2 -> 2.22-3)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python-cffi (1.17.1-1 -> 1.17.1-2)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python-cryptography (43.0.3-1 -> 45.0.5-1)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python-oauthlib (3.2.2-3 -> 3.2.2-4)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python-requests-oauthlib (1.3.1-4 -> 1.3.1-5)
[2025-07-09T22:25:53+0200] [ALPM] upgraded python-yaml (6.0.2-1 -> 6.0.2-2)
[2025-07-09T22:25:53+0200] [ALPM] upgraded apprise (1.9.0-1 -> 1.9.3-1)
[2025-07-09T22:25:53+0200] [ALPM] upgraded libxmlb (0.3.21-1 -> 0.3.22-1)
[2025-07-09T22:25:53+0200] [ALPM] upgraded appstream (1.0.4-1 -> 1.0.5-2)
[2025-07-09T22:25:54+0200] [ALPM] upgraded mpfr (4.2.1-4 -> 4.2.2-1)
[2025-07-09T22:25:54+0200] [ALPM] upgraded gawk (5.3.1-1 -> 5.3.2-1)
[2025-07-09T22:25:54+0200] [ALPM] upgraded gettext (0.22.5-2 -> 0.25.1-1)
[2025-07-09T22:25:54+0200] [ALPM] upgraded libksba (1.6.7-1 -> 1.6.7-2)
[2025-07-09T22:25:54+0200] [ALPM] upgraded gnupg (2.4.7-1 -> 2.4.8-1)
[2025-07-09T22:25:54+0200] [ALPM] upgraded gpgme (1.24.1-1 -> 2.0.0-1)
[2025-07-09T22:25:54+0200] [ALPM] upgraded grep (3.11-1 -> 3.12-2)
[2025-07-09T22:25:54+0200] [ALPM] upgraded libarchive (3.7.7-1 -> 3.8.1-1)
[2025-07-09T22:25:54+0200] [ALPM] upgraded pacman-mirrorlist (20240717-1 -> 20250702-2)
[2025-07-09T22:25:54+0200] [ALPM] upgraded device-mapper (2.03.29-1 -> 2.03.33-1)
[2025-07-09T22:25:54+0200] [ALPM] upgraded cryptsetup (2.7.5-1 -> 2.8.0-1)
[2025-07-09T22:25:54+0200] [ALPM] upgraded dbus-broker (36-4 -> 37-2)
[2025-07-09T22:25:54+0200] [ALPM] upgraded dbus-broker-units (36-4 -> 37-2)
[2025-07-09T22:25:55+0200] [ALPM] upgraded gzip (1.13-4 -> 1.14-2)
[2025-07-09T22:25:55+0200] [ALPM] upgraded kbd (2.7.1-1 -> 2.8.0-1)
[2025-07-09T22:25:55+0200] [ALPM] upgraded kmod (33-3 -> 34.2-1)
[2025-07-09T22:25:55+0200] [ALPM] upgraded hwdata (0.390-1 -> 0.397-1)
[2025-07-09T22:25:55+0200] [ALPM] upgraded libseccomp (2.5.5-3 -> 2.5.6-1)
[2025-07-09T22:25:55+0200] [ALPM] upgraded file (5.46-2 -> 5.46-4)
[2025-07-09T22:25:55+0200] [ALPM] upgraded shadow (4.16.0-1 -> 4.18.0-1)
[2025-07-09T22:25:55+0200] [ALPM] upgraded util-linux (2.40.2-1 -> 2.41.1-1)
[2025-07-09T22:25:55+0200] [ALPM] upgraded systemd (257-1 -> 257.7-1)
[2025-07-09T22:25:58+0200] [ALPM] upgraded pacman (7.0.0.r6.gc685ae6-1 -> 7.0.0.r6.gc685ae6-6)
[2025-07-09T22:25:58+0200] [ALPM] upgraded archlinux-keyring (20241203-1 -> 20250707-1)
[2025-07-09T22:26:03+0200] [ALPM] upgraded c-ares (1.34.3-1 -> 1.34.5-1)
[2025-07-09T22:26:03+0200] [ALPM] upgraded aria2 (1.37.0-1 -> 1.37.0-2)
[2025-07-09T22:26:03+0200] [ALPM] upgraded nss (3.107-1 -> 3.113.1-1)
[2025-07-09T22:26:04+0200] [ALPM] upgraded poppler (24.11.0-2 -> 25.06.0-1)
[2025-07-09T22:26:04+0200] [ALPM] upgraded poppler-glib (24.11.0-2 -> 25.06.0-1)
[2025-07-09T22:26:04+0200] [ALPM] upgraded enchant (2.8.2-1 -> 2.8.10-1)
[2025-07-09T22:26:04+0200] [ALPM] upgraded harfbuzz-icu (10.1.0-1 -> 11.2.1-1)
[2025-07-09T22:26:04+0200] [ALPM] upgraded giflib (5.2.2-1 -> 5.2.2-2)
[2025-07-09T22:26:04+0200] [ALPM] upgraded libwebp (1.4.0-3 -> 1.5.0-1)
[2025-07-09T22:26:04+0200] [ALPM] upgraded svt-av1 (2.2.1-1 -> 3.0.2-1)
[2025-07-09T22:26:04+0200] [ALPM] upgraded libavif (1.1.1-2 -> 1.3.0-1)
[2025-07-09T22:26:04+0200] [ALPM] upgraded libjxl (0.11.1-1 -> 0.11.1-4)
[2025-07-09T22:26:04+0200] [ALPM] upgraded libevdev (1.13.3-1 -> 1.13.4-1)
[2025-07-09T22:26:04+0200] [ALPM] upgraded libmanette (0.2.9-2 -> 0.2.12-1)
[2025-07-09T22:26:04+0200] [ALPM] upgraded libxslt (1.1.42-1 -> 1.1.43-2)
[2025-07-09T22:26:04+0200] [ALPM] upgraded woff2 (1.0.2-5 -> 1.0.2-6)
[2025-07-09T22:26:04+0200] [ALPM] upgraded perl (5.40.0-1 -> 5.40.2-1)
[2025-07-09T22:26:05+0200] [ALPM] upgraded libsynctex (2024.2-5 -> 2025.2-1)
[2025-07-09T22:26:05+0200] [ALPM] upgraded libidn (1.42-1 -> 1.43-1)
[2025-07-09T22:26:05+0200] [ALPM] upgraded libpaper (2.2.5-1 -> 2.2.6-1)
[2025-07-09T22:26:05+0200] [ALPM] upgraded ghostscript (10.04.0-1 -> 10.05.1-2)
[2025-07-09T22:26:06+0200] [ALPM] upgraded atril (1.28.0-3 -> 1.28.1-3)
[2025-07-09T22:26:06+0200] [ALPM] upgraded automake (1.17-1 -> 1.18-1)
[2025-07-09T22:26:06+0200] [ALPM] upgraded bash-completion (2.15.0-1 -> 2.16.0-1)
[2025-07-09T22:26:06+0200] [ALPM] upgraded libgit2 (1:1.8.4-1 -> 1:1.9.1-1)
[2025-07-09T22:26:06+0200] [ALPM] upgraded oniguruma (6.9.9-1 -> 6.9.10-1)
[2025-07-09T22:26:06+0200] [ALPM] upgraded bat (0.24.0-2 -> 0.25.0-4)
[2025-07-09T22:26:06+0200] [ALPM] upgraded bc (1.07.1-5 -> 1.08.2-1)
[2025-07-09T22:26:06+0200] [ALPM] upgraded jansson (2.14-4 -> 2.14.1-1)
[2025-07-09T22:26:06+0200] [ALPM] upgraded binutils (2.43+r4+g7999dae6961-1 -> 2.44+r94+gfe459e33c676-1)
[2025-07-09T22:26:06+0200] [ALPM] upgraded libgirepository (1.82.0-1 -> 1.84.0-2)
[2025-07-09T22:26:06+0200] [ALPM] upgraded gobject-introspection-runtime (1.82.0-1 -> 1.84.0-2)
[2025-07-09T22:26:06+0200] [ALPM] upgraded python-gobject (3.50.0-1 -> 3.52.3-3)
[2025-07-09T22:26:06+0200] [ALPM] upgraded python-psutil (6.1.0-1 -> 7.0.0-1)
[2025-07-09T22:26:07+0200] [ALPM] upgraded bleachbit (4.6.2-1 -> 5.0.0-1)
[2025-07-09T22:26:07+0200] [ALPM] upgraded bluez (5.79-1 -> 5.83-1)
[2025-07-09T22:26:07+0200] [ALPM] upgraded bluez-libs (5.79-1 -> 5.83-1)
[2025-07-09T22:26:07+0200] [ALPM] upgraded bluez-utils (5.79-1 -> 5.83-1)
[2025-07-09T22:26:07+0200] [ALPM] upgraded boost-libs (1.86.0-3 -> 1.88.0-3)
[2025-07-09T22:26:07+0200] [ALPM] upgraded botan (3.6.1-1 -> 3.8.1-1)
[2025-07-09T22:26:07+0200] [ALPM] upgraded btrfs-progs (6.12-1 -> 6.15-1)
[2025-07-09T22:26:07+0200] [ALPM] upgraded optipng (0.7.8-1 -> 7.9.1-1)
[2025-07-09T22:26:07+0200] [ALPM] upgraded lua (5.4.7-1 -> 5.4.8-2)
[2025-07-09T22:26:07+0200] [ALPM] upgraded podofo (0.10.3-1 -> 0.10.4-2)
[2025-07-09T22:26:07+0200] [ALPM] upgraded python-apsw (3.46.1.0-1 -> 3.49.2.0-1)
[2025-07-09T22:26:07+0200] [ALPM] upgraded python-soupsieve (2.6-1 -> 2.6-2)
[2025-07-09T22:26:07+0200] [ALPM] upgraded python-typing_extensions (4.12.2-1 -> 4.14.1-1)
[2025-07-09T22:26:07+0200] [ALPM] upgraded python-beautifulsoup4 (4.12.3-2 -> 4.13.3-1)
[2025-07-09T22:26:07+0200] [ALPM] upgraded python-css-parser (1.0.10-2 -> 1.0.10-3)
[2025-07-09T22:26:07+0200] [ALPM] upgraded python-cssselect (1.2.0-6 -> 1.2.0-8)
[2025-07-09T22:26:07+0200] [ALPM] upgraded python-six (1.16.0-9 -> 1.17.0-1)
[2025-07-09T22:26:07+0200] [ALPM] upgraded python-dateutil (2.9.0-5 -> 2.9.0-6)
[2025-07-09T22:26:07+0200] [ALPM] upgraded python-dnspython (1:2.6.1-1 -> 1:2.7.0-1)
[2025-07-09T22:26:07+0200] [ALPM] upgraded python-faust-cchardet (2.1.19-2 -> 2.1.19-3)
[2025-07-09T22:26:07+0200] [ALPM] upgraded python-sgmllib3k (1.0.0-6 -> 1.0.0-7)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-feedparser (6.0.11-2 -> 6.0.11-3)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-html2text (2024.2.26-1 -> 2025.4.15-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-chardet (5.2.0-2 -> 5.2.0-6)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-lxml (5.3.0-1 -> 6.0.0-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-html5-parser (0.4.12-2 -> 0.4.12-4)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-jeepney (0.8.0-3 -> 0.9.0-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-lxml-html-clean (0.2.0-1 -> 0.2.0-2)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-webencodings (0.5.1-11 -> 0.5.1-12)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-html5lib (1.1-14 -> 1.1-15)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-mechanize (1:0.4.10-1 -> 1:0.4.10-2)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-msgpack (1.0.5-2 -> 1.0.5-3)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-netifaces (0.11.0-5 -> 0.11.0-7)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-pdftotext (2.2.2-6 -> 2.2.2-9)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-packaging (24.2-1 -> 25.0-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded libimagequant (4.3.3-1 -> 4.3.4-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-pillow (11.0.0-1 -> 11.3.0-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-brotli (1.1.0-2 -> 1.1.0-3)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-brotlicffi (1.1.0.0-2 -> 1.1.0.0-3)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-multivolumefile (0.2.3-7 -> 0.2.3-9)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-pybcj (1.0.2-2 -> 1.0.6-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-pycryptodomex (3.21.0-1 -> 3.23.0-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-pyppmd (1.1.0-2 -> 1.2.0-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-pyzstd (0.16.2-1 -> 0.17.0-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-texttable (1.7.0-2 -> 1.7.0-3)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-inflate64 (1.0.0-2 -> 1.0.3-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-py7zr (0.22.0-1 -> 1.0.0-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-pychm (0.8.6-8 -> 0.8.6-9)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-pycryptodome (3.21.0-1 -> 3.23.0-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-pygments (2.18.0-1 -> 2.19.2-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-wrapt (1.16.0-3 -> 1.16.0-4)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-deprecated (1.2.15-1 -> 1.2.18-1)
[2025-07-09T22:26:08+0200] [ALPM] upgraded python-jaconv (0.3.4-1 -> 0.4.0-1)
[2025-07-09T22:26:09+0200] [ALPM] upgraded python-pykakasi (2.3.0-1 -> 2.3.0-2)
[2025-07-09T22:26:09+0200] [ALPM] upgraded python-pyqt6-sip (13.9.1-1 -> 13.10.2-1)
[2025-07-09T22:26:09+0200] [ALPM] upgraded double-conversion (3.3.0-2 -> 3.3.1-1)
[2025-07-09T22:26:09+0200] [ALPM] upgraded libwacom (2.14.0-1 -> 2.16.1-1)
[2025-07-09T22:26:09+0200] [ALPM] upgraded libinput (1.27.0-1 -> 1.28.1-1)
[2025-07-09T22:26:09+0200] [ALPM] upgraded qt6-translations (6.8.1-1 -> 6.9.1-1)
[2025-07-09T22:26:10+0200] [ALPM] upgraded qt6-base (6.8.1-1 -> 6.9.1-3)
[2025-07-09T22:26:10+0200] [ALPM] upgraded python-pyqt6 (6.8.0-1 -> 6.9.1-1)
[2025-07-09T22:26:10+0200] [ALPM] upgraded glslang (15.0.0-2 -> 1:1.4.313.0-1)
[2025-07-09T22:26:10+0200] [ALPM] upgraded libbluray (1.3.4-2 -> 1.3.4-3)
[2025-07-09T22:26:10+0200] [ALPM] upgraded flac (1.4.3-2 -> 1.5.0-1)
[2025-07-09T22:26:10+0200] [ALPM] upgraded libvorbis (1.3.7-3 -> 1.3.7-4)
[2025-07-09T22:26:10+0200] [ALPM] upgraded mpg123 (1.32.9-1 -> 1.33.0-1)
[2025-07-09T22:26:10+0200] [ALPM] upgraded libsndfile (1.2.2-2 -> 1.2.2-3)
[2025-07-09T22:26:10+0200] [ALPM] upgraded libopenmpt (0.7.11-1 -> 0.8.1-1)
[2025-07-09T22:26:10+0200] [ALPM] upgraded shaderc (2024.3-2 -> 2025.2-2)
[2025-07-09T22:26:10+0200] [ALPM] upgraded xxhash (0.8.2-1 -> 0.8.3-1)
[2025-07-09T22:26:10+0200] [ALPM] upgraded libplacebo (7.349.0-3 -> 7.351.0-1)
[2025-07-09T22:26:10+0200] [ALPM] upgraded libssh (0.11.1-1 -> 0.11.2-1)
[2025-07-09T22:26:10+0200] [ALPM] upgraded libtheora (1.1.1-6 -> 1.2.0-1)
[2025-07-09T22:26:10+0200] [ALPM] upgraded libvpx (1.14.1-1 -> 1.15.0-1)
[2025-07-09T22:26:10+0200] [ALPM] upgraded ocl-icd (2.3.2-2 -> 2.3.3-1)
[2025-07-09T22:26:10+0200] [ALPM] upgraded libvpl (2.14.0-1 -> 2.15.0-1)
[2025-07-09T22:26:11+0200] [ALPM] upgraded snappy (1.2.1-2 -> 1.2.2-2)
[2025-07-09T22:26:11+0200] [ALPM] upgraded libbpf (1.5.0-1 -> 1.5.1-1)
[2025-07-09T22:26:11+0200] [ALPM] upgraded v4l-utils (1.28.1-1 -> 1.30.1-1)
[2025-07-09T22:26:11+0200] [ALPM] upgraded vapoursynth (R70-1 -> R70-2)
[2025-07-09T22:26:11+0200] [ALPM] upgraded x265 (4.0-1 -> 4.1-1)
[2025-07-09T22:26:11+0200] [ALPM] upgraded ffmpeg (2:7.1-4 -> 2:7.1.1-4)
[2025-07-09T22:26:12+0200] [ALPM] upgraded qt6-declarative (6.8.1-1 -> 6.9.1-1)
[2025-07-09T22:26:12+0200] [ALPM] upgraded qt6-positioning (6.8.1-1 -> 6.9.1-1)
[2025-07-09T22:26:12+0200] [ALPM] upgraded qt6-webchannel (6.8.1-1 -> 6.9.1-1)
[2025-07-09T22:26:12+0200] [ALPM] upgraded re2 (1:20240702-2 -> 1:20240702-5)
[2025-07-09T22:26:13+0200] [ALPM] upgraded noto-fonts (1:2024.12.01-1 -> 1:2025.07.01-1)
[2025-07-09T22:26:13+0200] [ALPM] upgraded ttf-roboto (2.138-5 -> 3.011-1)
[2025-07-09T22:26:14+0200] [ALPM] upgraded qt6-webengine (6.8.1-1 -> 6.9.1-1)
[2025-07-09T22:26:14+0200] [ALPM] upgraded python-pyqt6-webengine (6.8.0-1 -> 6.9.0-1)
[2025-07-09T22:26:14+0200] [ALPM] upgraded python-regex (2024.11.6-1 -> 2024.11.6-2)
[2025-07-09T22:26:14+0200] [ALPM] upgraded libunrar (1:7.1.2-1 -> 1:7.1.8-1)
[2025-07-09T22:26:14+0200] [ALPM] upgraded python-unrardll (0.1.7-2 -> 0.1.7-4)
[2025-07-09T22:26:14+0200] [ALPM] upgraded python-xxhash (3.4.1-3 -> 3.5.0-1)
[2025-07-09T22:26:14+0200] [ALPM] upgraded python-ifaddr (0.2.0-5 -> 0.2.0-6)
[2025-07-09T22:26:14+0200] [ALPM] upgraded python-zeroconf (0.132.2-2 -> 0.147.0-2)
[2025-07-09T22:26:14+0200] [ALPM] upgraded python-zstandard (0.22.0-2 -> 0.23.0-2)
[2025-07-09T22:26:14+0200] [ALPM] upgraded freeglut (3.6.0-1 -> 3.6.0-2)
[2025-07-09T22:26:14+0200] [ALPM] upgraded jasper (4.2.4-2 -> 4.2.5-1)
[2025-07-09T22:26:14+0200] [ALPM] upgraded qt6-imageformats (6.8.1-1 -> 6.9.1-1)
[2025-07-09T22:26:14+0200] [ALPM] upgraded qt6-multimedia-ffmpeg (6.8.1-2 -> 6.9.1-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded qt6-multimedia (6.8.1-2 -> 6.9.1-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded qt6-speech (6.8.1-1 -> 6.9.1-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded qt6-svg (6.8.1-1 -> 6.9.1-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded libblockdev (3.2.1-2 -> 3.3.1-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded volume_key (0.3.12-9 -> 0.3.12-11)
[2025-07-09T22:26:15+0200] [ALPM] upgraded libblockdev-crypto (3.2.1-2 -> 3.3.1-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded libbytesize (2.8-3 -> 2.11-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded libblockdev-fs (3.2.1-2 -> 3.3.1-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded mdadm (4.3-2 -> 4.4-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded libblockdev-mdraid (3.2.1-2 -> 3.3.1-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded libblockdev-loop (3.2.1-2 -> 3.3.1-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded libnvme (1.11.1-1 -> 1.13-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded libblockdev-nvme (3.2.1-2 -> 3.3.1-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded libblockdev-part (3.2.1-2 -> 3.3.1-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded libblockdev-swap (3.2.1-2 -> 3.3.1-1)
[2025-07-09T22:26:15+0200] [ALPM] upgraded polkit (125-1 -> 126-2)
[2025-07-09T22:26:15+0200] [ALPM] upgraded udisks2 (2.10.1-5 -> 2.10.1-6)
[2025-07-09T22:26:17+0200] [ALPM] upgraded calibre (7.22.0-1 -> 8.5.0-1)
[2025-07-09T22:26:17+0200] [ALPM] upgraded clucene (2.3.3.4-15 -> 2.3.3.4-16)
[2025-07-09T22:26:17+0200] [ALPM] upgraded libuv (1.49.2-1 -> 1.51.0-1)
[2025-07-09T22:26:18+0200] [ALPM] upgraded cmake (4.0.1-2 -> 4.0.3-1)
[2025-07-09T22:26:18+0200] [ALPM] upgraded libgusb (0.4.9-1 -> 0.4.9-2)
[2025-07-09T22:26:18+0200] [ALPM] upgraded colord (1.4.7-2 -> 1.4.8-1)
[2025-07-09T22:26:18+0200] [ALPM] upgraded cracklib (2.10.2-1 -> 2.10.3-1)
[2025-07-09T22:26:18+0200] [ALPM] upgraded dbus-glib (0.112-4 -> 0.114-1)
[2025-07-09T22:26:18+0200] [ALPM] upgraded diffutils (3.10-1 -> 3.12-2)
[2025-07-09T22:26:19+0200] [ALPM] upgraded elementary-icon-theme (8.0.0-1 -> 8.1.0-1)
[2025-07-09T22:26:19+0200] [ALPM] upgraded fuse-common (3.16.2-1 -> 3.17.1-1)
[2025-07-09T22:26:19+0200] [ALPM] upgraded fuse3 (3.16.2-1 -> 3.17.1-1)
[2025-07-09T22:26:19+0200] [ALPM] upgraded exfat-utils (1.4.0-3 -> 1.4.0-4)
[2025-07-09T22:26:19+0200] [ALPM] upgraded libxfce4util (4.18.2-3 -> 4.20.1-1)
[2025-07-09T22:26:19+0200] [ALPM] upgraded xfconf (4.18.3-3 -> 4.20.0-2)
[2025-07-09T22:26:19+0200] [ALPM] upgraded libxfce4ui (4.18.6-3 -> 4.20.1-2)
[2025-07-09T22:26:19+0200] [ALPM] upgraded exo (4.18.0-4 -> 4.20.0-2)
[2025-07-09T22:26:19+0200] [ALPM] upgraded eza (0.20.13-1 -> 0.22.0-1)
[2025-07-09T22:26:19+0200] [ALPM] upgraded fakeroot (1.36-1 -> 1.37.1.2-1)
[2025-07-09T22:26:20+0200] [ALPM] upgraded fcgi (2.4.2-3 -> 2.4.6-1)
[2025-07-09T22:26:20+0200] [ALPM] upgraded libmfx (23.2.2-3 -> 23.2.2-4)
[2025-07-09T22:26:20+0200] [ALPM] upgraded ffmpeg4.4 (4.4.5-1 -> 4.4.6-1)
[2025-07-09T22:26:20+0200] [ALPM] upgraded gtk4 (1:4.16.7-1 -> 1:4.18.6-1)
[2025-07-09T22:26:20+0200] [ALPM] upgraded libadwaita (1:1.6.2-1 -> 1:1.7.5-1)
[2025-07-09T22:26:20+0200] [ALPM] upgraded libnautilus-extension (47.1-1 -> 48.3-1)
[2025-07-09T22:26:20+0200] [ALPM] upgraded file-roller (44.4-1 -> 44.5-1)
[2025-07-09T22:26:20+0200] [ALPM] upgraded libfilezilla (1:0.49.0-1 -> 1:0.50.0-1)
[2025-07-09T22:26:21+0200] [ALPM] upgraded filezilla (3.68.1-1 -> 3.69.1-1)
[2025-07-09T22:26:21+0200] [ALPM] upgraded qt5-translations (5.15.16-3 -> 5.15.17-1)
[2025-07-09T22:26:22+0200] [ALPM] upgraded qt5-base (5.15.16+kde+r130-3 -> 5.15.17+kde+r123-1)
[2025-07-09T22:26:22+0200] [ALPM] upgraded qt5-svg (5.15.16+kde+r5-3 -> 5.15.17+kde+r5-1)
[2025-07-09T22:26:22+0200] [ALPM] upgraded qt5-x11extras (5.15.16-3 -> 5.15.17-1)
[2025-07-09T22:26:22+0200] [ALPM] upgraded qt5-declarative (5.15.16+kde+r22-3 -> 5.15.17+kde+r21-1)
[2025-07-09T22:26:22+0200] [ALPM] upgraded qt5-wayland (5.15.16+kde+r59-3 -> 5.15.17+kde+r57-1)
[2025-07-09T22:26:22+0200] [ALPM] upgraded flameshot (12.1.0-5 -> 12.1.0-6)
[2025-07-09T22:26:22+0200] [ALPM] upgraded fltk (1.3.9-1 -> 1.3.11-1)
[2025-07-09T22:26:22+0200] [ALPM] upgraded fmt (11.0.2-1 -> 11.2.0-1)
[2025-07-09T22:26:22+0200] [ALPM] upgraded fzf (0.56.3-1 -> 0.62.0-1)
[2025-07-09T22:26:23+0200] [ALPM] upgraded garcon (4.18.2-3 -> 4.20.0-2)
[2025-07-09T22:26:25+0200] [ALPM] upgraded gcc (14.2.1+r134+gab884fffe3fc-1 -> 15.1.1+r7+gf36ec88aa85a-1)
[2025-07-09T22:26:25+0200] [ALPM] upgraded openssh (9.9p1-2 -> 10.0p1-3)
[2025-07-09T22:26:25+0200] [ALPM] upgraded gcr-4 (4.3.0-1 -> 4.4.0.1-1)
[2025-07-09T22:26:25+0200] [ALPM] upgraded perl-error (0.17029-7 -> 0.17030-1)
[2025-07-09T22:26:25+0200] [ALPM] upgraded git (2.47.1-1 -> 2.50.1-1)
[2025-07-09T22:26:26+0200] [ALPM] upgraded glibmm (2.66.7-1 -> 2.66.8-1)
[2025-07-09T22:26:26+0200] [ALPM] upgraded glibmm-2.68 (2.82.0-1 -> 2.84.0-1)
[2025-07-09T22:26:26+0200] [ALPM] upgraded libpwquality (1.4.5-5 -> 1.4.5-6)
[2025-07-09T22:26:26+0200] [ALPM] upgraded libtool (2.5.4+r1+gbaa1fe41-1 -> 2.5.4+r23+g5b582aed-1)
[2025-07-09T22:26:26+0200] [ALPM] upgraded tdb (1.4.12-1 -> 1.4.13-1)
[2025-07-09T22:26:26+0200] [ALPM] upgraded gnome-disk-utility (46.1-1 -> 46.1-2)
[2025-07-09T22:26:26+0200] [ALPM] upgraded gnustep-base (1.30.0-1 -> 1.31.1-1)
[2025-07-09T22:26:26+0200] [ALPM] upgraded gtkmm3 (3.24.9-1 -> 3.24.10-1)
[2025-07-09T22:26:26+0200] [ALPM] upgraded gparted (1.6.0-2 -> 1.7.0-1)
[2025-07-09T22:26:26+0200] [ALPM] upgraded gsfonts (20200910-4 -> 20200910-5)
[2025-07-09T22:26:26+0200] [ALPM] upgraded libde265 (1.0.15-3 -> 1.0.16-1)
[2025-07-09T22:26:26+0200] [ALPM] upgraded libheif (1.19.5-1 -> 1.20.1-1)
[2025-07-09T22:26:26+0200] [ALPM] upgraded netpbm (10.86.43-1 -> 10.86.47-1)
[2025-07-09T22:26:27+0200] [ALPM] upgraded graphviz (12.1.2-1 -> 13.0.1-1)
[2025-07-09T22:26:27+0200] [ALPM] upgraded grub (2:2.12-3 -> 2:2.12.r292.g73d1c959-1)
[2025-07-09T22:26:28+0200] [ALPM] upgraded gtk-layer-shell (0.9.0-1 -> 0.9.2-1)
[2025-07-09T22:26:28+0200] [ALPM] upgraded pangomm-2.48 (2.54.0-1 -> 2.56.1-1)
[2025-07-09T22:26:28+0200] [ALPM] upgraded gtkmm-4.0 (4.16.0-1 -> 4.18.0-2)
[2025-07-09T22:26:28+0200] [ALPM] upgraded gtksourceview4 (4.8.4-1 -> 4.8.4-2)
[2025-07-09T22:26:28+0200] [ALPM] upgraded libcdio (2.1.0-4 -> 2.2.0-1)
[2025-07-09T22:26:28+0200] [ALPM] upgraded procps-ng (4.0.4-3 -> 4.0.5-3)
[2025-07-09T22:26:28+0200] [ALPM] upgraded gvfs (1.56.1-1 -> 1.57.2-4)
[2025-07-09T22:26:28+0200] [ALPM] upgraded highlight (4.14-1 -> 4.16-1)
[2025-07-09T22:26:28+0200] [ALPM] upgraded htop (3.3.0-3 -> 3.4.1-1)
[2025-07-09T22:26:28+0200] [ALPM] upgraded hwloc (2.11.2-1 -> 2.12.1-1)
[2025-07-09T22:26:29+0200] [ALPM] upgraded intel-ucode (20241112-1 -> 20250512-1)
[2025-07-09T22:26:29+0200] [ALPM] upgraded libnftnl (1.2.8-1 -> 1.2.9-1)
[2025-07-09T22:26:29+0200] [ALPM] upgraded libpcap (1.10.5-2 -> 1.10.5-3)
[2025-07-09T22:26:29+0200] [ALPM] upgraded iptables (1:1.8.10-2 -> 1:1.8.11-2)
[2025-07-09T22:26:29+0200] [ALPM] upgraded iproute2 (6.12.0-1 -> 6.15.0-1)
[2025-07-09T22:26:29+0200] [ALPM] upgraded iputils (20240905-1 -> 20250605-1)
[2025-07-09T22:26:29+0200] [ALPM] upgraded java-environment-common (3-5 -> 3-6)
[2025-07-09T22:26:29+0200] [ALPM] upgraded java-runtime-common (3-5 -> 3-6)
[2025-07-09T22:26:32+0200] [ALPM] upgraded jdk-openjdk (23.0.1.u0-1 -> 24.0.1.u9-1)
[2025-07-09T22:26:33+0200] [ALPM] upgraded jq (1.7.1-2 -> 1.8.1-1)
[2025-07-09T22:26:33+0200] [ALPM] upgraded pcsclite (2.3.0-1 -> 2.3.3-1)
[2025-07-09T22:26:33+0200] [ALPM] upgraded qrencode (4.1.1-3 -> 4.1.1-4)
[2025-07-09T22:26:33+0200] [ALPM] upgraded keepassxc (2.7.9-4 -> 2.7.10-2)
[2025-07-09T22:26:33+0200] [ALPM] upgraded libabw (0.1.3-4 -> 0.1.3-5)
[2025-07-09T22:26:33+0200] [ALPM] upgraded libcdr (0.1.8-1 -> 0.1.8-2)
[2025-07-09T22:26:33+0200] [ALPM] upgraded libcmis (0.6.2-2 -> 0.6.2-5)
[2025-07-09T22:26:33+0200] [ALPM] upgraded libdecor (0.2.2-1 -> 0.2.3-1)
[2025-07-09T22:26:33+0200] [ALPM] upgraded libdeflate (1.22-1 -> 1.23-1)
[2025-07-09T22:26:33+0200] [ALPM] upgraded liblangtag (0.6.7-1 -> 0.6.7-2)
[2025-07-09T22:26:34+0200] [ALPM] upgraded libe-book (0.1.3-16 -> 0.1.3-18)
[2025-07-09T22:26:34+0200] [ALPM] upgraded libei (1.3.0-1 -> 1.4.1-1)
[2025-07-09T22:26:34+0200] [ALPM] upgraded libetonyek (0.1.12-1 -> 0.1.12-3)
[2025-07-09T22:26:34+0200] [ALPM] upgraded libexif (0.6.24-3 -> 0.6.25-1)
[2025-07-09T22:26:35+0200] [ALPM] upgraded libfabric (1.22.0-2 -> 2.2.0-1)
[2025-07-09T22:26:35+0200] [ALPM] upgraded libgee (0.20.6-2 -> 0.20.8-1)
[2025-07-09T22:26:35+0200] [ALPM] upgraded libplist (2.6.0-1 -> 2.7.0-1)
[2025-07-09T22:26:35+0200] [ALPM] upgraded libimobiledevice-glue (1.3.1-1 -> 1.3.2-1)
[2025-07-09T22:26:35+0200] [ALPM] upgraded libusbmuxd (2.1.0-1 -> 2.1.1-1)
[2025-07-09T22:26:35+0200] [ALPM] upgraded libimobiledevice (1.3.0-14 -> 1.3.0-16)
[2025-07-09T22:26:35+0200] [ALPM] upgraded libixion (0.19.0-3 -> 0.20.0-2)
[2025-07-09T22:26:35+0200] [ALPM] upgraded tinyxml2 (10.0.0-1 -> 11.0.0-1)
[2025-07-09T22:26:35+0200] [ALPM] upgraded libmediainfo (24.12-1 -> 25.04-2)
[2025-07-09T22:26:35+0200] [ALPM] upgraded libmm-glib (1.22.0-1 -> 1.24.0-2)
[2025-07-09T22:26:36+0200] [ALPM] upgraded libmspub (0.1.4-16 -> 0.1.4-17)
[2025-07-09T22:26:36+0200] [ALPM] upgraded libnewt (0.52.24-2 -> 0.52.25-1)
[2025-07-09T22:26:36+0200] [ALPM] upgraded libngtcp2 (1.10.0-1 -> 1.13.0-1)
[2025-07-09T22:26:36+0200] [ALPM] upgraded libnm (1.50.0-1 -> 1.52.0-1)
[2025-07-09T22:26:36+0200] [ALPM] upgraded libodfgen (0.1.8-3 -> 0.1.8-4)
[2025-07-09T22:26:36+0200] [ALPM] upgraded liborcus (0.19.2-3 -> 0.20.1-1)
[2025-07-09T22:26:36+0200] [ALPM] upgraded libpipewire (1:1.2.7-1 -> 1:1.4.6-1)
[2025-07-09T22:26:36+0200] [ALPM] upgraded libqxp (0.0.2-12 -> 0.0.2-13)
[2025-07-09T22:26:36+0200] [ALPM] upgraded libwps (0.4.14-2 -> 0.4.14-3)
[2025-07-09T22:26:36+0200] [ALPM] upgraded neon (0.34.0-1 -> 0.34.2-1)
[2025-07-09T22:26:36+0200] [ALPM] upgraded libvisio (0.1.8-1 -> 0.1.8-3)
[2025-07-09T22:26:36+0200] [ALPM] upgraded libzmf (0.0.2-16 -> 0.0.2-17)
[2025-07-09T22:26:36+0200] [ALPM] upgraded xmlsec (1.3.6-1 -> 1.3.7-2)
[2025-07-09T22:26:36+0200] [ALPM] upgraded libstaroffice (0.0.7-3 -> 0.0.7-4)
[2025-07-09T22:26:36+0200] [ALPM] upgraded zxing-cpp (2.2.1-1 -> 2.3.0-5)
[2025-07-09T22:26:36+0200] [ALPM] upgraded raptor (2.0.16-5 -> 2.0.16-7)
[2025-07-09T22:26:40+0200] [ALPM] upgraded libreoffice-fresh (24.8.3-1 -> 25.2.4-2)
[2025-07-09T22:26:40+0200] [ALPM] upgraded libsixel (1.10.3-7 -> 1.10.5-1)
[2025-07-09T22:26:41+0200] [ALPM] upgraded libsoup (2.74.3-1 -> 2.74.3-3)
[2025-07-09T22:26:41+0200] [ALPM] upgraded libtorrent (0.14.0-1 -> 0.15.5-1)
[2025-07-09T22:26:41+0200] [ALPM] upgraded libtorrent-rasterbar (1:2.0.10-3 -> 1:2.0.11-4)
[2025-07-09T22:26:41+0200] [ALPM] upgraded liburcu (0.15.0-1 -> 0.15.3-1)
[2025-07-09T22:26:41+0200] [ALPM] upgraded libwnck3 (43.1-1 -> 43.2-1)
[2025-07-09T22:26:41+0200] [ALPM] upgraded libxklavier (5.4-5 -> 5.4-6)
[2025-07-09T22:26:41+0200] [ALPM] upgraded libzip (1.11.2-1 -> 1.11.4-1)
[2025-07-09T22:26:41+0200] [ALPM] upgraded lighttpd (1.4.76-1 -> 1.4.79-2)
[2025-07-09T22:26:45+0200] [ALPM] upgraded linux (6.12.4.arch1-1 -> 6.15.5.arch1-1)
[2025-07-09T22:26:45+0200] [ALPM] upgraded pahole (1:1.27-2 -> 1:1.30-2)
[2025-07-09T22:26:52+0200] [ALPM] upgraded linux-headers (6.12.4.arch1-1 -> 6.15.5.arch1-1)
[2025-07-09T22:26:54+0200] [ALPM] upgraded linux-lts (6.6.65-1 -> 6.12.36-1)
[2025-07-09T22:26:59+0200] [ALPM] upgraded linux-lts-headers (6.6.65-1 -> 6.12.36-1)
[2025-07-09T22:27:01+0200] [ALPM] upgraded luajit (2.1.1731601260-1 -> 2.1.1748459687-1)
[2025-07-09T22:27:01+0200] [ALPM] upgraded thin-provisioning-tools (1.1.0-1 -> 1.2.0-1)
[2025-07-09T22:27:02+0200] [ALPM] upgraded lvm2 (2.03.29-1 -> 2.03.33-1)
[2025-07-09T22:27:02+0200] [ALPM] upgraded m4 (1.4.19-3 -> 1.4.20-1)
[2025-07-09T22:27:02+0200] [ALPM] upgraded man-db (2.13.0-1 -> 2.13.1-1)
[2025-07-09T22:27:03+0200] [ALPM] upgraded man-pages (6.9.1-1 -> 6.14-1)
[2025-07-09T22:27:03+0200] [ALPM] upgraded mediainfo (24.12-1 -> 25.04-1)
[2025-07-09T22:27:03+0200] [ALPM] upgraded miniupnpc (2.2.8-1 -> 2.3.3-1)
[2025-07-09T22:27:03+0200] [ALPM] upgraded pugixml (1.14-1 -> 1.15-2)
[2025-07-09T22:27:03+0200] [ALPM] upgraded mkvtoolnix-cli (88.0-1 -> 91.0-2)
[2025-07-09T22:27:03+0200] [ALPM] upgraded mkvtoolnix-gui (88.0-1 -> 91.0-2)
[2025-07-09T22:27:03+0200] [ALPM] upgraded mobile-broadband-provider-info (20240407-1 -> 20250613-1)
[2025-07-09T22:27:03+0200] [ALPM] upgraded mousepad (0.6.3-2 -> 0.6.5-1)
[2025-07-09T22:27:03+0200] [ALPM] upgraded mujs (1.3.5-1 -> 1.3.7-1)
[2025-07-09T22:27:03+0200] [ALPM] upgraded openal (1.24.1-1 -> 1.24.3-1)
[2025-07-09T22:27:03+0200] [ALPM] upgraded mpv (1:0.39.0-4 -> 1:0.40.0-3)
[2025-07-09T22:27:03+0200] [ALPM] upgraded mtools (1:4.0.46-1 -> 1:4.0.49-1)
[2025-07-09T22:27:03+0200] [ALPM] upgraded nano (8.2-1 -> 8.5-1)
[2025-07-09T22:27:03+0200] [ALPM] upgraded ncdu (2.7-1 -> 2.8.2-3)
[2025-07-09T22:27:03+0200] [ALPM] upgraded wpa_supplicant (2:2.11-2 -> 2:2.11-3)
[2025-07-09T22:27:04+0200] [ALPM] upgraded networkmanager (1.50.0-1 -> 1.52.0-1)
[2025-07-09T22:27:04+0200] [ALPM] upgraded nodejs (23.4.0-1 -> 24.3.0-1)
[2025-07-09T22:27:07+0200] [ALPM] upgraded noto-fonts-cjk (20230817-2 -> 20240730-1)
[2025-07-09T22:27:07+0200] [ALPM] upgraded noto-fonts-emoji (1:2.047-1 -> 1:2.048-1)
[2025-07-09T22:27:07+0200] [ALPM] upgraded ntfs-3g (2022.10.3-1 -> 2022.10.3-2)
[2025-07-09T22:27:07+0200] [ALPM] upgraded openpmix (5.0.4-1 -> 5.0.8-1)
[2025-07-09T22:27:07+0200] [ALPM] upgraded openucx (1.17.0-3 -> 1.18.1-3)
[2025-07-09T22:27:08+0200] [ALPM] upgraded prrte (3.0.7-1 -> 3.0.11-1)
[2025-07-09T22:27:08+0200] [ALPM] upgraded openmpi (5.0.5-2 -> 5.0.8-1)
[2025-07-09T22:27:08+0200] [ALPM] upgraded os-prober (1.81-2 -> 1.83-1)
[2025-07-09T22:27:08+0200] [ALPM] upgraded pacman-contrib (1.10.6-2 -> 1.12.0-1)
[2025-07-09T22:27:08+0200] [ALPM] upgraded pacutils (0.14.0-3 -> 0.15.0-1)
[2025-07-09T22:27:22+0200] [ALPM] upgraded papirus-icon-theme (20240501-1 -> 20250501-1)
[2025-07-09T22:27:22+0200] [ALPM] upgraded par2cmdline (0.8.1-3 -> 1.0.0-1)
[2025-07-09T22:27:22+0200] [ALPM] upgraded parallel (20241122-1 -> 20250622-1)
[2025-07-09T22:27:22+0200] [ALPM] upgraded patch (2.7.6-10 -> 2.8-1)
[2025-07-09T22:27:22+0200] [ALPM] upgraded pciutils (3.13.0-2 -> 3.14.0-1)
[2025-07-09T22:27:24+0200] [ALPM] upgraded php (8.3.15-1 -> 8.4.10-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded php-cgi (8.3.15-1 -> 8.4.10-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded pipewire (1:1.2.7-1 -> 1:1.4.6-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded pkgconf (2.3.0-1 -> 2.5.1-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-attrs (23.2.0-3 -> 25.3.0-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-autocommand (2.2.2-6 -> 2.2.2-7)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-more-itertools (10.3.0-1 -> 10.7.0-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-jaraco.functools (4.0.2-1 -> 4.1.0-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-jaraco.context (5.3.0-1 -> 6.0.1-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-jaraco.text (4.0.0-1 -> 4.0.0-2)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-jaraco.collections (5.0.1-1 -> 5.1.0-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-platformdirs (4.3.6-1 -> 4.3.6-2)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-wheel (0.45.0-1 -> 0.45.1-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-setuptools (1:75.2.0-2 -> 1:80.9.0-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-babelfish (0.6.1-1 -> 0.6.1-2)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-blinker (1.8.2-1 -> 1.8.2-2)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-cachelib (0.13.0-1 -> 0.13.0-3)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-cheetah3 (3.3.3-2 -> 3.4.0-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-cheroot (10.0.1-3 -> 10.0.1-5)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-tempora (5.7.0-1 -> 5.8.1-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-portend (3.2.0-2 -> 3.2.1-1)
[2025-07-09T22:27:25+0200] [ALPM] upgraded python-zc.lockfile (3.0.post1-3 -> 3.0.post1-5)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-cherrypy (18.10.0-1 -> 18.10.0-2)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-colorama (0.4.6-3 -> 0.4.6-5)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-configobj (5.0.9-1 -> 5.0.9-5)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-dbus (1.3.2-4 -> 1.4.0-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-filelock (3.16.1-1 -> 3.18.0-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-itsdangerous (2.1.2-4 -> 2.2.0-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-markupsafe (2.1.5-2 -> 3.0.2-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-jinja (1:3.1.4-1 -> 1:3.1.6-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-werkzeug (3.0.4-1 -> 3.1.3-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-flask (2.3.3-2 -> 3.1.1-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-gpgme (1.24.1-1 -> 2.0.0-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-rebulk (3.2.0-3 -> 3.2.0-4)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-guessit (3.8.0-3 -> 3.8.0-4)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-zipp (3.21.0-1 -> 3.21.0-2)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-importlib-metadata (7.2.1-1 -> 8.7.0-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-typeguard (4.3.0-1 -> 4.4.4-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-inflect (7.4.0-1 -> 7.5.0-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-jaraco.classes (3.4.0-1 -> 3.4.0-2)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-secretstorage (3.3.3-5 -> 3.3.3-6)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-keyring (25.5.0-1 -> 25.6.0-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-notify2 (0.3.1-10 -> 0.3.1-11)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-pip (24.3.1-1 -> 25.1.1-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-puremagic (1.28-1 -> 2.0.0b4-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-pyfiglet (1.0.2-2 -> 1.0.3-1)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-pymediainfo (6.1.0-3 -> 6.1.0-4)
[2025-07-09T22:27:26+0200] [ALPM] upgraded python-pyqt5-sip (12.16.1-1 -> 12.17.0-1)
[2025-07-09T22:27:27+0200] [ALPM] upgraded python-pyqt5 (5.15.11-1 -> 5.15.11-2)
[2025-07-09T22:27:27+0200] [ALPM] upgraded python-pysocks (1.7.1-9 -> 1.7.1-10)
[2025-07-09T22:27:27+0200] [ALPM] upgraded python-pytz (2024.2-1 -> 2025.2-1)
[2025-07-09T22:27:27+0200] [ALPM] upgraded python-rarfile (4.2-2 -> 4.2-3)
[2025-07-09T22:27:27+0200] [ALPM] upgraded python-send2trash (1.8.3-1 -> 1.8.3-2)
[2025-07-09T22:27:27+0200] [ALPM] upgraded python-tqdm (4.67.1-1 -> 4.67.1-2)
[2025-07-09T22:27:27+0200] [ALPM] upgraded qbittorrent (5.0.3-1 -> 5.1.2-1)
[2025-07-09T22:27:27+0200] [ALPM] upgraded qt6-tools (6.8.1-1 -> 6.9.1-2)
[2025-07-09T22:27:28+0200] [ALPM] upgraded rclone (1.68.2-1 -> 1.70.3-1)
[2025-07-09T22:27:28+0200] [ALPM] upgraded reflector (2023-2 -> 2023-3)
[2025-07-09T22:27:28+0200] [ALPM] upgraded tumbler (4.18.2-3 -> 4.20.0-3)
[2025-07-09T22:27:28+0200] [ALPM] upgraded ristretto (0.13.2-3 -> 0.13.4-1)
[2025-07-09T22:27:28+0200] [ALPM] upgraded rsync (3.3.0-2 -> 3.4.1-2)
[2025-07-09T22:27:28+0200] [ALPM] upgraded rtorrent (0.10.0-1 -> 0.15.5-1)
[2025-07-09T22:27:28+0200] [ALPM] upgraded run-parts (5.17-1 -> 5.23.1-1)
[2025-07-09T22:27:28+0200] [ALPM] upgraded sox (14.4.2+r184+gf3094754-1 -> 14.4.2+r184+gf3094754-7)
[2025-07-09T22:27:28+0200] [ALPM] upgraded sshfs (3.7.3-2 -> 3.7.3-3)
[2025-07-09T22:27:29+0200] [ALPM] upgraded sudo (1.9.16.p2-1 -> 1.9.17.p1-1)
[2025-07-09T22:27:29+0200] [ALPM] upgraded syncthing (1.28.1-1 -> 1.30.0-1)
[2025-07-09T22:27:29+0200] [ALPM] upgraded systemd-sysvcompat (257-1 -> 257.7-1)
[2025-07-09T22:27:29+0200] [ALPM] upgraded taglib (2.0.2-1 -> 2.1.1-1)
[2025-07-09T22:27:30+0200] [ALPM] upgraded texinfo (7.1.1-1 -> 7.2-1)
[2025-07-09T22:27:30+0200] [ALPM] upgraded thunar (4.18.11-3 -> 4.20.3-1)
[2025-07-09T22:27:30+0200] [ALPM] upgraded thunar-archive-plugin (0.5.2-3 -> 0.6.0-1)
[2025-07-09T22:27:30+0200] [ALPM] upgraded thunar-media-tags-plugin (0.4.0-4 -> 0.6.0-1)
[2025-07-09T22:27:30+0200] [ALPM] upgraded thunar-volman (4.18.0-4 -> 4.20.0-2)
[2025-07-09T22:27:30+0200] [ALPM] upgraded xorg-xauth (1.1.3-1 -> 1.1.4-1)
[2025-07-09T22:27:30+0200] [ALPM] upgraded xorg-xinit (1.4.2-2 -> 1.4.4-1)
[2025-07-09T22:27:31+0200] [ALPM] upgraded tigervnc (1.14.1-1 -> 1.15.0-1)
[2025-07-09T22:27:31+0200] [ALPM] upgraded vte-common (0.78.2-1 -> 0.80.3-1)
[2025-07-09T22:27:31+0200] [ALPM] upgraded vte3 (0.78.2-1 -> 0.80.3-1)
[2025-07-09T22:27:31+0200] [ALPM] upgraded xapp (2.8.7-1 -> 2.8.9-1)
[2025-07-09T22:27:31+0200] [ALPM] upgraded which (2.21-6 -> 2.23-1)
[2025-07-09T22:27:31+0200] [ALPM] upgraded timeshift (24.06.5-1 -> 24.06.6-1)
[2025-07-09T22:27:31+0200] [ALPM] upgraded tor (0.4.8.13-1 -> 0.4.8.17-1)
[2025-07-09T22:27:31+0200] [ALPM] upgraded torbrowser-launcher (0.3.7-2 -> 0.3.7-3)
[2025-07-09T22:27:31+0200] [ALPM] upgraded transmission-cli (4.0.6-2 -> 4.0.6-10)
[2025-07-09T22:27:31+0200] [ALPM] upgraded transmission-gtk (4.0.6-2 -> 4.0.6-10)
[2025-07-09T22:27:33+0200] [ALPM] upgraded ttc-iosevka (32.2.1-1 -> 33.2.6-1)
[2025-07-09T22:27:33+0200] [ALPM] upgraded wavpack (5.7.0-1 -> 5.8.1-1)
[2025-07-09T22:27:33+0200] [ALPM] upgraded unarchiver (1.10.8-3 -> 1.10.8-5)
[2025-07-09T22:27:33+0200] [ALPM] upgraded unrar (1:7.1.2-1 -> 1:7.1.8-1)
[2025-07-09T22:27:33+0200] [ALPM] upgraded unzip (6.0-21 -> 6.0-22)
[2025-07-09T22:27:33+0200] [ALPM] upgraded upower (1.90.6-1 -> 1.90.9-1)
[2025-07-09T22:27:37+0200] [ALPM] upgraded vim-runtime (9.1.1165-1 -> 9.1.1497-1)
[2025-07-09T22:27:37+0200] [ALPM] upgraded vim (9.1.1165-1 -> 9.1.1497-1)
[2025-07-09T22:27:38+0200] [ALPM] upgraded vulkan-headers (1:1.4.303-1 -> 1:1.4.313.0-1)
[2025-07-09T22:27:38+0200] [ALPM] upgraded webkit2gtk (2.46.5-1 -> 2.48.3-1)
[2025-07-09T22:27:38+0200] [ALPM] upgraded webrtc-audio-processing-1 (1.3-3 -> 1.3-5)
[2025-07-09T22:27:38+0200] [ALPM] upgraded wget (1.25.0-1 -> 1.25.0-2)
[2025-07-09T22:27:41+0200] [ALPM] upgraded xdg-desktop-portal (1.18.4-2 -> 1.20.3-1)
[2025-07-09T22:27:41+0200] [ALPM] upgraded xf86-video-intel (1:2.99.917+923+gb74b67f0-2 -> 1:2.99.917+939+g4a64400e-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-appfinder (4.18.1-4 -> 4.20.0-2)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-panel (4.18.6-3 -> 4.20.4-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-battery-plugin (1.1.5-4 -> 1.2.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-clipman-plugin (1.6.6-3 -> 1.7.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-cpufreq-plugin (1.2.8-4 -> 1.3.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-cpugraph-plugin (1.2.10-3 -> 1.3.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-diskperf-plugin (2.7.0-4 -> 2.8.0-2)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-eyes-plugin (4.6.0-4 -> 4.7.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-fsguard-plugin (1.1.3-4 -> 1.2.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-genmon-plugin (4.2.0-4 -> 4.3.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-mailwatch-plugin (1.3.1-4 -> 1.4.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-mount-plugin (1.1.6-4 -> 1.2.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-mpc-plugin (0.5.3-4 -> 0.6.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-netload-plugin (1.4.1-4 -> 1.5.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-notes-plugin (1.11.0-3 -> 1.12.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-notifyd (0.9.6-3 -> 0.9.7-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-power-manager (4.18.4-3 -> 4.20.0-3)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-pulseaudio-plugin (0.4.8-3 -> 0.5.1-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-sensors-plugin (1.4.4-4 -> 1.5.0-2)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-session (4.18.4-3 -> 4.20.2-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-settings (4.18.6-4 -> 4.20.1-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-smartbookmark-plugin (0.5.2-4 -> 0.6.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-systemload-plugin (1.3.2-4 -> 1.4.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-taskmanager (1.5.7-3 -> 1.6.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-terminal (1.1.3-3 -> 1.1.5-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-time-out-plugin (1.1.3-4 -> 1.2.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-timer-plugin (1.7.2-4 -> 1.8.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-verve-plugin (2.0.3-4 -> 2.1.0-1)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-wavelan-plugin (0.6.3-4 -> 0.7.0-2)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-weather-plugin (0.11.3-1 -> 0.12.0-2)
[2025-07-09T22:27:42+0200] [ALPM] upgraded xfce4-whiskermenu-plugin (2.8.3-2 -> 2.10.0-1)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xfce4-xkb-plugin (0.8.3-4 -> 0.9.0-1)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xfdesktop (4.18.1-4 -> 4.20.1-1)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xfsprogs (6.12.0-1 -> 6.15.0-1)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xfwm4 (4.18.0-4 -> 4.20.0-2)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xorg-server-common (21.1.15-1 -> 21.1.18-2)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xorg-server (21.1.15-1 -> 21.1.18-2)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xorg-server-devel (21.1.15-1 -> 21.1.18-2)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xorg-server-xephyr (21.1.15-1 -> 21.1.18-2)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xorg-server-xnest (21.1.15-1 -> 21.1.18-2)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xorg-server-xvfb (21.1.15-1 -> 21.1.18-2)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xorg-sessreg (1.1.3-2 -> 1.1.4-1)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xorg-smproxy (1.0.7-2 -> 1.0.8-1)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xorg-xcursorgen (1.0.8-2 -> 1.0.9-1)
[2025-07-09T22:27:43+0200] [ALPM] upgraded xorg-xhost (1.0.9-2 -> 1.0.10-1)
[2025-07-09T22:27:44+0200] [ALPM] upgraded xorg-xwayland (24.1.4-1 -> 24.1.8-1)
[2025-07-09T22:27:44+0200] [ALPM] upgraded yt-dlp (2024.12.13-1 -> 2025.06.30-1)
[2025-07-09T22:27:44+0200] [ALPM] upgraded zenity (4.0.3-1 -> 4.1.90-1)
[2025-07-09T22:35:49+0200] [ALPM] upgraded python-sabctools (8.2.5-1 -> 8.2.5-2)
[2025-07-09T22:35:49+0200] [ALPM] upgraded makemkv (1.17.8-1 -> 1.18.1-1)
[2025-07-09T22:35:49+0200] [ALPM] upgraded megatools (1.11.1+20241028-1 -> 1.11.5-1)
[2025-07-09T22:35:50+0200] [ALPM] upgraded webcord-bin (4.10.2-1 -> 4.11.0-2)
[2025-07-09T22:35:50+0200] [ALPM] upgraded python-async-timeout (4.0.3-5 -> 5.0.1-1)
[2025-07-09T22:35:50+0200] [ALPM] upgraded python-sabyenc3 (5.4.4-2 -> 5.4.4-3)
[2025-07-09T22:35:51+0200] [ALPM] upgraded rutorrent (5.1.4-1 -> 5.2.10-1)
[2025-07-09T22:35:52+0200] [ALPM] upgraded downgrade (11.4.2-1 -> 11.5.2-1)
[2025-07-09T22:36:05+0200] [ALPM] upgraded mullvad-vpn-bin (2025.6-1 -> 2025.7-1)
[2025-07-09T22:36:07+0200] [ALPM] upgraded mullvad-vpn-bin-debug (2025.6-1 -> 2025.7-1)
[2025-07-09T22:36:09+0200] [ALPM] upgraded 64gram-desktop-bin (1:1.1.52-1 -> 1:1.1.58-1)
[2025-07-09T22:36:09+0200] [ALPM] upgraded backintime-cli (1.5.3-2 -> 1.5.5-1)
[2025-07-09T22:36:09+0200] [ALPM] upgraded yay-bin (12.4.2-1 -> 12.5.0-1)
[2025-07-09T22:36:09+0200] [ALPM] upgraded sabnzbd (4.4.1-1 -> 4.5.1-1)
[2025-07-09T22:36:13+0200] [ALPM] upgraded brave-bin (1:1.73.104-1 -> 1:1.80.120-1)
[2025-07-09T22:36:13+0200] [ALPM] upgraded backintime (1.5.3-2 -> 1.5.5-1)
[2025-07-09T22:36:13+0200] [ALPM] upgraded html2md (1.1.0-1 -> 1.6.0-2)

journalctl -b -0 -p err

lug 09 23:08:27 mulo kernel: x86/cpu: SGX disabled or unsupported by BIOS.
lug 09 23:08:27 mulo kernel: scsi 2:0:0:1: Failed to get diagnostic page 0x1
lug 09 23:08:27 mulo kernel: scsi 2:0:0:1: Failed to bind enclosure -19
lug 09 23:08:38 mulo systemd[1]: Failed to start Refresh Pacman mirrorlist with Reflector..
lug 09 23:09:06 mulo kernel: Buffer I/O error on dev dm-4, logical block 30965760, lost sync page write
lug 09 23:09:06 mulo kernel: JBD2: I/O error when updating journal superblock for dm-4-8.
lug 09 23:09:06 mulo kernel: Aborting journal on device dm-4-8.
lug 09 23:09:06 mulo kernel: Buffer I/O error on dev dm-4, logical block 30965760, lost sync page write
lug 09 23:09:06 mulo kernel: JBD2: I/O error when updating journal superblock for dm-4-8.
lug 09 23:09:06 mulo kernel: EXT4-fs error (device dm-4): ext4_put_super:1318: comm umount: Couldn't clean up the journal
lug 09 23:09:06 mulo kernel: Buffer I/O error on dev dm-4, logical block 0, lost sync page write
lug 09 23:09:06 mulo kernel: EXT4-fs (dm-4): I/O error while writing superblock
lug 09 23:09:06 mulo kernel: EXT4-fs (dm-4): Remounting filesystem read-only
lug 09 23:09:06 mulo kernel: Buffer I/O error on dev dm-4, logical block 0, lost sync page write
lug 09 23:09:06 mulo kernel: EXT4-fs (dm-4): I/O error while writing superblock
lug 09 23:09:06 mulo systemd-cryptsetup[1760]: device-mapper: remove ioctl on luks-00d46560-89a9-4027-93d5-71fa2c8e247e  failed: Device or resource busy
lug 09 23:09:57 mulo systemd[1]: Timed out waiting for device /dev/disk/by-uuid/6401ad98-a5cf-4ccd-bc97-90d098f9368f.
lug 09 23:09:57 mulo systemd[1]: Timed out waiting for device /dev/disk/by-uuid/a7818834-7865-407a-b44f-53fcb81be83d.
lug 09 23:10:43 mulo systemd-cryptsetup[2012]: device-mapper: remove ioctl on luks-daa95dca-bdba-4e23-ac42-5e9cc33053bc  failed: Device or resource busy
lug 09 23:10:43 mulo kernel: Buffer I/O error on dev dm-3, logical block 0, lost sync page write
lug 09 23:10:43 mulo kernel: EXT4-fs (dm-3): I/O error while writing superblock
lug 09 23:52:05 mulo kernel: I/O error, dev sdc, sector 973636064 op 0x1:(WRITE) flags 0x9800 phys_seg 4 prio class 2
lug 09 23:52:05 mulo kernel: Aborting journal on device dm-3-8.
lug 09 23:52:05 mulo kernel: I/O error, dev sdc, sector 973346816 op 0x1:(WRITE) flags 0x9800 phys_seg 1 prio class 2
lug 09 23:52:05 mulo kernel: I/O error, dev sdc, sector 973346816 op 0x1:(WRITE) flags 0x9800 phys_seg 1 prio class 2
lug 09 23:52:05 mulo kernel: Buffer I/O error on dev dm-3, logical block 121667584, lost sync page write
lug 09 23:52:05 mulo kernel: JBD2: I/O error when updating journal superblock for dm-3-8.
lug 09 23:52:05 mulo kernel: Buffer I/O error on dev dm-3, logical block 244189856, async page read
lug 09 23:52:05 mulo systemd-cryptsetup[4510]: Device luks-daa95dca-bdba-4e23-ac42-5e9cc33053bc is still in use.
lug 09 23:52:05 mulo systemd-cryptsetup[4510]: Failed to deactivate 'luks-daa95dca-bdba-4e23-ac42-5e9cc33053bc': Device or resource busy
lug 09 23:52:13 mulo kernel: Buffer I/O error on dev dm-3, logical block 32505888, lost async page write
lug 09 23:52:13 mulo kernel: Buffer I/O error on dev dm-3, logical block 154140704, lost async page write
lug 09 23:52:13 mulo kernel: Buffer I/O error on dev dm-3, logical block 154140705, lost async page write
lug 09 23:52:13 mulo kernel: Buffer I/O error on dev dm-3, logical block 154140706, lost async page write
lug 09 23:52:13 mulo kernel: Buffer I/O error on dev dm-3, logical block 154140707, lost async page write
lug 09 23:52:13 mulo kernel: Buffer I/O error on dev dm-3, logical block 154140708, lost async page write
lug 09 23:53:55 mulo kernel: Buffer I/O error on dev dm-3, logical block 0, lost sync page write
lug 09 23:53:55 mulo kernel: EXT4-fs (dm-3): I/O error while writing superblock
lug 10 00:02:36 mulo kernel: usb 2-1: cmd cmplt err -2
lug 10 01:22:06 mulo systemd-cryptsetup[7094]: Device luks-00d46560-89a9-4027-93d5-71fa2c8e247e is still in use.
lug 10 01:22:06 mulo systemd-cryptsetup[7094]: Failed to deactivate 'luks-00d46560-89a9-4027-93d5-71fa2c8e247e': Device or resource busy
lug 10 01:22:08 mulo kernel: Buffer I/O error on dev dm-4, logical block 30965760, lost sync page write
lug 10 01:22:08 mulo kernel: JBD2: I/O error when updating journal superblock for dm-4-8.
lug 10 01:22:08 mulo kernel: Aborting journal on device dm-4-8.
lug 10 01:22:08 mulo kernel: Buffer I/O error on dev dm-4, logical block 30965760, lost sync page write
lug 10 01:22:08 mulo kernel: JBD2: I/O error when updating journal superblock for dm-4-8.
lug 10 01:22:08 mulo kernel: EXT4-fs error (device dm-4): ext4_put_super:1318: comm umount: Couldn't clean up the journal
lug 10 01:22:08 mulo kernel: Buffer I/O error on dev dm-4, logical block 0, lost sync page write
lug 10 01:22:08 mulo kernel: EXT4-fs (dm-4): I/O error while writing superblock
lug 10 01:22:08 mulo kernel: EXT4-fs (dm-4): Remounting filesystem read-only
lug 10 01:22:08 mulo kernel: Buffer I/O error on dev dm-4, logical block 0, lost sync page write
lug 10 01:22:08 mulo kernel: EXT4-fs (dm-4): I/O error while writing superblock
lug 10 01:22:08 mulo kernel: Buffer I/O error on dev dm-4, logical block 0, async page read

Last edited by pepper (2025-07-10 07:03:23)

-thc · 2025-07-10 08:18:32

O.K. - but you installed 694 updates! Check your total

pacman -Q | wc -l

This looks like several months (more than a year?) of missed updates.
There's a good reason for the recommended update frequency from the Arch team (once a week).

Now you have so many possible causes at hand that a correlation with an single update is a needle in a haystack.
And rolling back a specific package may be a PITA.

pepper · 2025-07-10 10:25:18

pacman -Q | wc -l
2318

last update was in 2025-05-30 and now in 2025-07-05, around 1 month

It seems the uas driver is the problem? This log is about:
1) I manually mounted the disk because after reboot it was unmounted
2) I successfully read/write to the disk (using file manager), then after 2-3min the disk unmounts:

journalctl -k -b | grep -iE 'sd[b-c]|dm-[34]'

lug 10 13:54:00 mulo kernel: sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 10 13:54:00 mulo kernel: sd 4:0:0:0: [sdc] 4096-byte physical blocks
lug 10 13:54:00 mulo kernel: sd 4:0:0:0: [sdc] Write Protect is off
lug 10 13:54:00 mulo kernel: sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
lug 10 13:54:00 mulo kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 10 13:54:00 mulo kernel: sd 3:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
lug 10 13:54:00 mulo kernel: sd 3:0:0:0: [sdb] 4096-byte physical blocks
lug 10 13:54:00 mulo kernel: sd 3:0:0:0: [sdb] Write Protect is off
lug 10 13:54:00 mulo kernel: sd 3:0:0:0: [sdb] Mode Sense: 53 00 00 08
lug 10 13:54:00 mulo kernel: sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 10 13:54:00 mulo kernel: sd 4:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes
lug 10 13:54:00 mulo kernel: sd 4:0:0:0: [sdc] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
lug 10 13:54:00 mulo kernel: sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
lug 10 13:54:00 mulo kernel: sd 3:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
lug 10 13:54:00 mulo kernel:  sdb: sdb1
lug 10 13:54:00 mulo kernel: sd 3:0:0:0: [sdb] Attached SCSI disk
lug 10 13:54:00 mulo kernel:  sdc: sdc1
lug 10 13:54:00 mulo kernel: sd 4:0:0:0: [sdc] Attached SCSI disk
lug 10 13:54:14 mulo kernel: EXT4-fs (dm-4): mounted filesystem e10ab897-b1af-45c8-bb93-9a85d0561900 r/w with ordered data mode. Quota mode: none.
lug 10 13:54:16 mulo kernel: EXT4-fs (dm-3): recovery complete
lug 10 13:54:16 mulo kernel: EXT4-fs (dm-3): mounted filesystem 245c388e-dec5-4ba7-adf9-c4da95835a16 r/w with ordered data mode. Quota mode: none.
lug 10 14:01:00 mulo kernel: sd 3:0:0:0: [sdb] tag#11 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN 
lug 10 14:01:00 mulo kernel: sd 3:0:0:0: [sdb] tag#11 CDB: Read(10) 28 00 18 40 dd 08 00 00 08 00
lug 10 14:01:00 mulo kernel: sd 3:0:0:0: [sdb] tag#10 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 
lug 10 14:01:00 mulo kernel: sd 3:0:0:0: [sdb] tag#10 CDB: Read(10) 28 00 18 40 dd 10 00 00 f8 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#29 uas_eh_abort_handler 0 uas-tag 25 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#29 CDB: Write(10) 2a 00 0e d4 39 28 00 00 38 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#28 uas_eh_abort_handler 0 uas-tag 26 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#28 CDB: Write(10) 2a 00 0e d4 39 60 00 00 30 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 24 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 0e d4 38 f8 00 00 30 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 23 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 0e d4 38 c0 00 00 38 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 22 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#25 CDB: Write(10) 2a 00 0e d4 38 90 00 00 30 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#24 uas_eh_abort_handler 0 uas-tag 21 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#24 CDB: Write(10) 2a 00 0e d4 38 60 00 00 30 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#23 uas_eh_abort_handler 0 uas-tag 20 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#23 CDB: Write(10) 2a 00 0e d4 38 30 00 00 30 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#22 uas_eh_abort_handler 0 uas-tag 19 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#22 CDB: Write(10) 2a 00 0e d4 37 f8 00 00 38 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#21 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#21 CDB: Write(10) 2a 00 0e d4 37 c8 00 00 30 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#20 uas_eh_abort_handler 0 uas-tag 17 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#20 CDB: Write(10) 2a 00 0e d4 37 a0 00 00 28 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#19 uas_eh_abort_handler 0 uas-tag 16 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#19 CDB: Write(10) 2a 00 0e d4 37 80 00 00 20 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#18 uas_eh_abort_handler 0 uas-tag 15 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#18 CDB: Write(10) 2a 00 0e d4 37 68 00 00 18 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#17 uas_eh_abort_handler 0 uas-tag 14 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#17 CDB: Write(10) 2a 00 0e d4 37 48 00 00 20 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#16 uas_eh_abort_handler 0 uas-tag 13 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#16 CDB: Write(10) 2a 00 0e d4 37 30 00 00 18 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#15 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#15 CDB: Write(10) 2a 00 0e d4 37 18 00 00 18 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#14 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#14 CDB: Write(10) 2a 00 0e d4 37 00 00 00 18 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#13 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#13 CDB: Write(10) 2a 00 0e d4 36 e8 00 00 18 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#12 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#12 CDB: Write(10) 2a 00 0e d4 36 c8 00 00 20 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#9 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#9 CDB: Write(10) 2a 00 0e d4 36 a0 00 00 28 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#8 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#8 CDB: Write(10) 2a 00 0e d4 36 60 00 00 40 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#7 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#7 CDB: Write(10) 2a 00 0e d4 32 00 00 03 f0 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#6 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#6 CDB: Write(10) 2a 00 0e d4 2e 00 00 04 00 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#5 CDB: Write(10) 2a 00 0e d4 36 18 00 00 48 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#4 CDB: Write(10) 2a 00 0e d4 35 f0 00 00 28 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#3 uas_eh_abort_handler 0 uas-tag 27 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#3 CDB: Write(10) 2a 00 0e d4 39 90 00 00 28 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#2 uas_eh_abort_handler 0 uas-tag 30 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#2 CDB: Write(10) 2a 00 0e d4 3a 10 00 00 40 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#1 uas_eh_abort_handler 0 uas-tag 29 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#1 CDB: Write(10) 2a 00 0e d4 39 e0 00 00 30 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#0 uas_eh_abort_handler 0 uas-tag 28 inflight: CMD OUT 
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#0 CDB: Write(10) 2a 00 0e d4 39 b8 00 00 28 00
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#10 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=32s
lug 10 14:01:01 mulo kernel: sd 3:0:0:0: [sdb] tag#10 CDB: Read(10) 28 00 18 40 dd 10 00 00 f8 00
lug 10 14:01:01 mulo kernel: I/O error, dev sdb, sector 406904080 op 0x0:(READ) flags 0x80700 phys_seg 31 prio class 0

Last edited by pepper (2025-07-10 12:12:20)

seth · 2025-07-10 14:27:32

https://bbs.archlinux.org/viewtopic.php … 1#p2247961 but you'll have to adjust the USB ID, in doubt post the entire journal (as you already figured - filtering for random stuff if you don't yet know what you're looking for ain't a good strategy )

pepper · 2025-07-10 15:56:47

I rebooted, waited 2-3 minutes, /dev/sde1 unmounted and this is the log since boot

journalctl -k -b

lug 10 17:51:52 mulo kernel: Linux version 6.12.36-1-lts (linux-lts@archlinux) (gcc (GCC) 15.1.1 20250425, GNU ld (GNU Binutils) 2.44.0) #1 SMP PREEMPT_DYNAMIC Sun, 06 Jul 2025 12:59:22 +0000
lug 10 17:51:52 mulo kernel: Command line: BOOT_IMAGE=/vmlinuz-linux-lts root=/dev/mapper/volgroup_0-lv_root rw cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm root=/dev/volgroup_0/lv_root loglevel=3 quiet
lug 10 17:51:52 mulo kernel: BIOS-provided physical RAM map:
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x0000000000040000-0x0000000000058fff] usable
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x0000000000059000-0x0000000000059fff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x000000000005a000-0x000000000009dfff] usable
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x0000000012151000-0x00000000773d8fff] usable
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x00000000773d9000-0x0000000079c9dfff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x0000000079c9e000-0x0000000079cc1fff] ACPI data
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x0000000079cc2000-0x0000000079d21fff] ACPI NVS
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x0000000079d22000-0x000000007a0b6fff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x000000007a0b7000-0x000000007a170fff] type 20
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x000000007a171000-0x000000007a564fff] usable
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x000000007a565000-0x000000007a610fff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x000000007a611000-0x000000007abfffff] usable
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x000000007ac00000-0x000000007fffffff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
lug 10 17:51:52 mulo kernel: BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
lug 10 17:51:52 mulo kernel: NX (Execute Disable) protection: active
lug 10 17:51:52 mulo kernel: APIC: Static calls initialized
lug 10 17:51:52 mulo kernel: efi: EFI v2.7 by American Megatrends
lug 10 17:51:52 mulo kernel: efi: ACPI 2.0=0x79cae000 ACPI=0x79cae000 SMBIOS=0x79f6f000 SMBIOS 3.0=0x79f6e000 MEMATTR=0x72de1018 ESRT=0x79f4af18 
lug 10 17:51:52 mulo kernel: efi: Remove mem50: MMIO range=[0xd0000000-0xd0ffffff] (16MB) from e820 map
lug 10 17:51:52 mulo kernel: e820: remove [mem 0xd0000000-0xd0ffffff] reserved
lug 10 17:51:52 mulo kernel: efi: Not removing mem51: MMIO range=[0xd3709000-0xd3709fff] (4KB) from e820 map
lug 10 17:51:52 mulo kernel: efi: Remove mem52: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
lug 10 17:51:52 mulo kernel: e820: remove [mem 0xe0000000-0xefffffff] reserved
lug 10 17:51:52 mulo kernel: efi: Not removing mem53: MMIO range=[0xfe042000-0xfe042fff] (4KB) from e820 map
lug 10 17:51:52 mulo kernel: efi: Not removing mem54: MMIO range=[0xfe043000-0xfe043fff] (4KB) from e820 map
lug 10 17:51:52 mulo kernel: efi: Not removing mem55: MMIO range=[0xfe044000-0xfe044fff] (4KB) from e820 map
lug 10 17:51:52 mulo kernel: efi: Not removing mem56: MMIO range=[0xfe900000-0xfe902fff] (12KB) from e820 map
lug 10 17:51:52 mulo kernel: efi: Not removing mem57: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
lug 10 17:51:52 mulo kernel: efi: Not removing mem58: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map
lug 10 17:51:52 mulo kernel: efi: Not removing mem59: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
lug 10 17:51:52 mulo kernel: efi: Remove mem60: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
lug 10 17:51:52 mulo kernel: e820: remove [mem 0xff000000-0xffffffff] reserved
lug 10 17:51:52 mulo kernel: SMBIOS 3.2.0 present.
lug 10 17:51:52 mulo kernel: DMI: Intel(R) Client Systems NUC7PJYHN/NUC7JYB, BIOS JYGLKCPX.86A.0065.2021.0722.1137 07/22/2021
lug 10 17:51:52 mulo kernel: DMI: Memory slots populated: 2/2
lug 10 17:51:52 mulo kernel: tsc: Detected 1996.800 MHz processor
lug 10 17:51:52 mulo kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
lug 10 17:51:52 mulo kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
lug 10 17:51:52 mulo kernel: last_pfn = 0x280000 max_arch_pfn = 0x400000000
lug 10 17:51:52 mulo kernel: MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs
lug 10 17:51:52 mulo kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
lug 10 17:51:52 mulo kernel: last_pfn = 0x7ac00 max_arch_pfn = 0x400000000
lug 10 17:51:52 mulo kernel: esrt: Reserving ESRT space from 0x0000000079f4af18 to 0x0000000079f4af50.
lug 10 17:51:52 mulo kernel: Using GB pages for direct mapping
lug 10 17:51:52 mulo kernel: Secure boot disabled
lug 10 17:51:52 mulo kernel: RAMDISK: [mem 0x34209000-0x360fbfff]
lug 10 17:51:52 mulo kernel: ACPI: Early table checksum verification disabled
lug 10 17:51:52 mulo kernel: ACPI: RSDP 0x0000000079CAE000 000024 (v02 INTEL )
lug 10 17:51:52 mulo kernel: ACPI: XSDT 0x0000000079CAE0B0 0000D4 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 10 17:51:52 mulo kernel: ACPI: FACP 0x0000000079CBB630 000114 (v06 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 10 17:51:52 mulo kernel: ACPI: DSDT 0x0000000079CAE230 00D3FB (v02 INTEL  NUC7CJYB 01072009 INTL 20160930)
lug 10 17:51:52 mulo kernel: ACPI: FACS 0x0000000079D21080 000040
lug 10 17:51:52 mulo kernel: ACPI: FPDT 0x0000000079CBB750 000044 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 10 17:51:52 mulo kernel: ACPI: FIDT 0x0000000079CBB7A0 00009C (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 10 17:51:52 mulo kernel: ACPI: MCFG 0x0000000079CBB840 00003C (v01 INTEL  NUC7CJYB 01072009 MSFT 00000097)
lug 10 17:51:52 mulo kernel: ACPI: DBG2 0x0000000079CBB880 000072 (v00 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 17:51:52 mulo kernel: ACPI: DBGP 0x0000000079CBB900 000034 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 17:51:52 mulo kernel: ACPI: HPET 0x0000000079CBB940 000038 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 17:51:52 mulo kernel: ACPI: LPIT 0x0000000079CBB980 00005C (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 17:51:52 mulo kernel: ACPI: APIC 0x0000000079CBB9E0 000084 (v04 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 17:51:52 mulo kernel: ACPI: NPKT 0x0000000079CBBA70 000065 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 17:51:52 mulo kernel: ACPI: SSDT 0x0000000079CBBAE0 0010B3 (v02 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 17:51:52 mulo kernel: ACPI: SSDT 0x0000000079CBCBA0 0009FF (v01 INTEL  NUC7CJYB 00001000 INTL 20160930)
lug 10 17:51:52 mulo kernel: ACPI: SSDT 0x0000000079CBD5A0 0000B1 (v01 INTEL  NUC7CJYB 00001000 INTL 20160930)
lug 10 17:51:52 mulo kernel: ACPI: SSDT 0x0000000079CBD660 000661 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 10 17:51:52 mulo kernel: ACPI: SSDT 0x0000000079CBDCD0 000775 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 10 17:51:52 mulo kernel: ACPI: SSDT 0x0000000079CBE450 00035F (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 10 17:51:52 mulo kernel: ACPI: SSDT 0x0000000079CBE7B0 0001E6 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 10 17:51:52 mulo kernel: ACPI: SSDT 0x0000000079CBE9A0 00286F (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 10 17:51:52 mulo kernel: ACPI: BGRT 0x0000000079CC1210 000038 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 10 17:51:52 mulo kernel: ACPI: DMAR 0x0000000079CC1250 0000A8 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 17:51:52 mulo kernel: ACPI: WDAT 0x0000000079CC1300 000104 (v01 INTEL  NUC7CJYB 00000000      00000000)
lug 10 17:51:52 mulo kernel: ACPI: WSMT 0x0000000079CC1410 000028 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 10 17:51:52 mulo kernel: ACPI: Reserving FACP table memory at [mem 0x79cbb630-0x79cbb743]
lug 10 17:51:52 mulo kernel: ACPI: Reserving DSDT table memory at [mem 0x79cae230-0x79cbb62a]
lug 10 17:51:52 mulo kernel: ACPI: Reserving FACS table memory at [mem 0x79d21080-0x79d210bf]
lug 10 17:51:52 mulo kernel: ACPI: Reserving FPDT table memory at [mem 0x79cbb750-0x79cbb793]
lug 10 17:51:52 mulo kernel: ACPI: Reserving FIDT table memory at [mem 0x79cbb7a0-0x79cbb83b]
lug 10 17:51:52 mulo kernel: ACPI: Reserving MCFG table memory at [mem 0x79cbb840-0x79cbb87b]
lug 10 17:51:52 mulo kernel: ACPI: Reserving DBG2 table memory at [mem 0x79cbb880-0x79cbb8f1]
lug 10 17:51:52 mulo kernel: ACPI: Reserving DBGP table memory at [mem 0x79cbb900-0x79cbb933]
lug 10 17:51:52 mulo kernel: ACPI: Reserving HPET table memory at [mem 0x79cbb940-0x79cbb977]
lug 10 17:51:52 mulo kernel: ACPI: Reserving LPIT table memory at [mem 0x79cbb980-0x79cbb9db]
lug 10 17:51:52 mulo kernel: ACPI: Reserving APIC table memory at [mem 0x79cbb9e0-0x79cbba63]
lug 10 17:51:52 mulo kernel: ACPI: Reserving NPKT table memory at [mem 0x79cbba70-0x79cbbad4]
lug 10 17:51:52 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbbae0-0x79cbcb92]
lug 10 17:51:52 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbcba0-0x79cbd59e]
lug 10 17:51:52 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbd5a0-0x79cbd650]
lug 10 17:51:52 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbd660-0x79cbdcc0]
lug 10 17:51:52 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbdcd0-0x79cbe444]
lug 10 17:51:52 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe450-0x79cbe7ae]
lug 10 17:51:52 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe7b0-0x79cbe995]
lug 10 17:51:52 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe9a0-0x79cc120e]
lug 10 17:51:52 mulo kernel: ACPI: Reserving BGRT table memory at [mem 0x79cc1210-0x79cc1247]
lug 10 17:51:52 mulo kernel: ACPI: Reserving DMAR table memory at [mem 0x79cc1250-0x79cc12f7]
lug 10 17:51:52 mulo kernel: ACPI: Reserving WDAT table memory at [mem 0x79cc1300-0x79cc1403]
lug 10 17:51:52 mulo kernel: ACPI: Reserving WSMT table memory at [mem 0x79cc1410-0x79cc1437]
lug 10 17:51:52 mulo kernel: No NUMA configuration found
lug 10 17:51:52 mulo kernel: Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
lug 10 17:51:52 mulo kernel: NODE_DATA(0) allocated [mem 0x27ffd22c0-0x27fffcfff]
lug 10 17:51:52 mulo kernel: Zone ranges:
lug 10 17:51:52 mulo kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
lug 10 17:51:52 mulo kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
lug 10 17:51:52 mulo kernel:   Normal   [mem 0x0000000100000000-0x000000027fffffff]
lug 10 17:51:52 mulo kernel:   Device   empty
lug 10 17:51:52 mulo kernel: Movable zone start for each node
lug 10 17:51:52 mulo kernel: Early memory node ranges
lug 10 17:51:52 mulo kernel:   node   0: [mem 0x0000000000001000-0x000000000003efff]
lug 10 17:51:52 mulo kernel:   node   0: [mem 0x0000000000040000-0x0000000000058fff]
lug 10 17:51:52 mulo kernel:   node   0: [mem 0x000000000005a000-0x000000000009dfff]
lug 10 17:51:52 mulo kernel:   node   0: [mem 0x0000000000100000-0x000000000fffffff]
lug 10 17:51:52 mulo kernel:   node   0: [mem 0x0000000012151000-0x00000000773d8fff]
lug 10 17:51:52 mulo kernel:   node   0: [mem 0x000000007a171000-0x000000007a564fff]
lug 10 17:51:52 mulo kernel:   node   0: [mem 0x000000007a611000-0x000000007abfffff]
lug 10 17:51:52 mulo kernel:   node   0: [mem 0x0000000100000000-0x000000027fffffff]
lug 10 17:51:52 mulo kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
lug 10 17:51:52 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 10 17:51:52 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 10 17:51:52 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 10 17:51:52 mulo kernel: On node 0, zone DMA: 98 pages in unavailable ranges
lug 10 17:51:52 mulo kernel: On node 0, zone DMA32: 8529 pages in unavailable ranges
lug 10 17:51:52 mulo kernel: On node 0, zone DMA32: 11672 pages in unavailable ranges
lug 10 17:51:52 mulo kernel: On node 0, zone DMA32: 172 pages in unavailable ranges
lug 10 17:51:52 mulo kernel: On node 0, zone Normal: 21504 pages in unavailable ranges
lug 10 17:51:52 mulo kernel: Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
lug 10 17:51:52 mulo kernel: ACPI: PM-Timer IO Port: 0x408
lug 10 17:51:52 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
lug 10 17:51:52 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
lug 10 17:51:52 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
lug 10 17:51:52 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
lug 10 17:51:52 mulo kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
lug 10 17:51:52 mulo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
lug 10 17:51:52 mulo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
lug 10 17:51:52 mulo kernel: ACPI: Using ACPI (MADT) for SMP configuration information
lug 10 17:51:52 mulo kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
lug 10 17:51:52 mulo kernel: e820: update [mem 0x73d75000-0x73e0efff] usable ==> reserved
lug 10 17:51:52 mulo kernel: TSC deadline timer available
lug 10 17:51:52 mulo kernel: CPU topo: Max. logical packages:   1
lug 10 17:51:52 mulo kernel: CPU topo: Max. logical dies:       1
lug 10 17:51:52 mulo kernel: CPU topo: Max. dies per package:   1
lug 10 17:51:52 mulo kernel: CPU topo: Max. threads per core:   1
lug 10 17:51:52 mulo kernel: CPU topo: Num. cores per package:     4
lug 10 17:51:52 mulo kernel: CPU topo: Num. threads per package:   4
lug 10 17:51:52 mulo kernel: CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
lug 10 17:51:52 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
lug 10 17:51:52 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
lug 10 17:51:52 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x00059000-0x00059fff]
lug 10 17:51:52 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
lug 10 17:51:52 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x10000000-0x12150fff]
lug 10 17:51:52 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x73d75000-0x73e0efff]
lug 10 17:51:52 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x773d9000-0x7a170fff]
lug 10 17:51:52 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x7a565000-0x7a610fff]
lug 10 17:51:52 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0xffffffff]
lug 10 17:51:52 mulo kernel: [mem 0x80000000-0xd3708fff] available for PCI devices
lug 10 17:51:52 mulo kernel: Booting paravirtualized kernel on bare hardware
lug 10 17:51:52 mulo kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
lug 10 17:51:52 mulo kernel: setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
lug 10 17:51:52 mulo kernel: percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u524288
lug 10 17:51:52 mulo kernel: pcpu-alloc: s237568 r8192 d28672 u524288 alloc=1*2097152
lug 10 17:51:52 mulo kernel: pcpu-alloc: [0] 0 1 2 3 
lug 10 17:51:52 mulo kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=/dev/mapper/volgroup_0-lv_root rw cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm root=/dev/volgroup_0/lv_root loglevel=3 quiet
lug 10 17:51:52 mulo kernel: Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux-lts cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm", will be passed to user space.
lug 10 17:51:52 mulo kernel: random: crng init done
lug 10 17:51:52 mulo kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
lug 10 17:51:52 mulo kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
lug 10 17:51:52 mulo kernel: Fallback order for Node 0: 0 
lug 10 17:51:52 mulo kernel: Built 1 zonelists, mobility grouping on.  Total pages: 2055174
lug 10 17:51:52 mulo kernel: Policy zone: Normal
lug 10 17:51:52 mulo kernel: mem auto-init: stack:all(zero), heap alloc:on, heap free:off
lug 10 17:51:52 mulo kernel: software IO TLB: area num 4.
lug 10 17:51:52 mulo kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
lug 10 17:51:52 mulo kernel: ftrace: allocating 51450 entries in 201 pages
lug 10 17:51:52 mulo kernel: ftrace: allocated 201 pages with 4 groups
lug 10 17:51:52 mulo kernel: Dynamic Preempt: voluntary
lug 10 17:51:52 mulo kernel: rcu: Preemptible hierarchical RCU implementation.
lug 10 17:51:52 mulo kernel: rcu:         RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
lug 10 17:51:52 mulo kernel: rcu:         RCU priority boosting: priority 1 delay 500 ms.
lug 10 17:51:52 mulo kernel:         Trampoline variant of Tasks RCU enabled.
lug 10 17:51:52 mulo kernel:         Rude variant of Tasks RCU enabled.
lug 10 17:51:52 mulo kernel:         Tracing variant of Tasks RCU enabled.
lug 10 17:51:52 mulo kernel: rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
lug 10 17:51:52 mulo kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
lug 10 17:51:52 mulo kernel: RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 10 17:51:52 mulo kernel: RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 10 17:51:52 mulo kernel: RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 10 17:51:52 mulo kernel: NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
lug 10 17:51:52 mulo kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention.
lug 10 17:51:52 mulo kernel: kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
lug 10 17:51:52 mulo kernel: Console: colour dummy device 80x25
lug 10 17:51:52 mulo kernel: printk: legacy console [tty0] enabled
lug 10 17:51:52 mulo kernel: ACPI: Core revision 20240827
lug 10 17:51:52 mulo kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
lug 10 17:51:52 mulo kernel: APIC: Switch to symmetric I/O mode setup
lug 10 17:51:52 mulo kernel: DMAR: Host address width 39
lug 10 17:51:52 mulo kernel: DMAR: DRHD base: 0x000000fed64000 flags: 0x0
lug 10 17:51:52 mulo kernel: DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
lug 10 17:51:52 mulo kernel: DMAR: DRHD base: 0x000000fed65000 flags: 0x1
lug 10 17:51:52 mulo kernel: DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
lug 10 17:51:52 mulo kernel: DMAR: RMRR base: 0x00000079c3c000 end: 0x00000079c5bfff
lug 10 17:51:52 mulo kernel: DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
lug 10 17:51:52 mulo kernel: DMAR-IR: IOAPIC id 1 under DRHD base  0xfed65000 IOMMU 1
lug 10 17:51:52 mulo kernel: DMAR-IR: HPET id 0 under DRHD base 0xfed65000
lug 10 17:51:52 mulo kernel: DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
lug 10 17:51:52 mulo kernel: DMAR-IR: Enabled IRQ remapping in x2apic mode
lug 10 17:51:52 mulo kernel: x2apic enabled
lug 10 17:51:52 mulo kernel: APIC: Switched APIC routing to: cluster x2apic
lug 10 17:51:52 mulo kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
lug 10 17:51:52 mulo kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
lug 10 17:51:52 mulo kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3995.00 BogoMIPS (lpj=6656000)
lug 10 17:51:52 mulo kernel: x86/cpu: SGX disabled or unsupported by BIOS.
lug 10 17:51:52 mulo kernel: CPU0: Thermal monitoring enabled (TM1)
lug 10 17:51:52 mulo kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated
lug 10 17:51:52 mulo kernel: Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
lug 10 17:51:52 mulo kernel: Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
lug 10 17:51:52 mulo kernel: process: using mwait in idle threads
lug 10 17:51:52 mulo kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
lug 10 17:51:52 mulo kernel: Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit
lug 10 17:51:52 mulo kernel: Spectre V2 : Mitigation: Enhanced / Automatic IBRS
lug 10 17:51:52 mulo kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
lug 10 17:51:52 mulo kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
lug 10 17:51:52 mulo kernel: Register File Data Sampling: Mitigation: Clear Register File
lug 10 17:51:52 mulo kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
lug 10 17:51:52 mulo kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
lug 10 17:51:52 mulo kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
lug 10 17:51:52 mulo kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
lug 10 17:51:52 mulo kernel: x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
lug 10 17:51:52 mulo kernel: x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
lug 10 17:51:52 mulo kernel: x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
lug 10 17:51:52 mulo kernel: Freeing SMP alternatives memory: 40K
lug 10 17:51:52 mulo kernel: pid_max: default: 32768 minimum: 301
lug 10 17:51:52 mulo kernel: LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
lug 10 17:51:52 mulo kernel: landlock: Up and running.
lug 10 17:51:52 mulo kernel: Yama: becoming mindful.
lug 10 17:51:52 mulo kernel: LSM support for eBPF active
lug 10 17:51:52 mulo kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
lug 10 17:51:52 mulo kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
lug 10 17:51:52 mulo kernel: smpboot: CPU0: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz (family: 0x6, model: 0x7a, stepping: 0x8)
lug 10 17:51:52 mulo kernel: Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
lug 10 17:51:52 mulo kernel: ... version:                4
lug 10 17:51:52 mulo kernel: ... bit width:              48
lug 10 17:51:52 mulo kernel: ... generic registers:      4
lug 10 17:51:52 mulo kernel: ... value mask:             0000ffffffffffff
lug 10 17:51:52 mulo kernel: ... max period:             00007fffffffffff
lug 10 17:51:52 mulo kernel: ... fixed-purpose events:   3
lug 10 17:51:52 mulo kernel: ... event mask:             000000070000000f
lug 10 17:51:52 mulo kernel: signal: max sigframe size: 2032
lug 10 17:51:52 mulo kernel: Estimated ratio of average max frequency by base frequency (times 1024): 1638
lug 10 17:51:52 mulo kernel: rcu: Hierarchical SRCU implementation.
lug 10 17:51:52 mulo kernel: rcu:         Max phase no-delay instances is 1000.
lug 10 17:51:52 mulo kernel: Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
lug 10 17:51:52 mulo kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
lug 10 17:51:52 mulo kernel: smp: Bringing up secondary CPUs ...
lug 10 17:51:52 mulo kernel: smpboot: x86: Booting SMP configuration:
lug 10 17:51:52 mulo kernel: .... node  #0, CPUs:      #1 #2 #3
lug 10 17:51:52 mulo kernel: smp: Brought up 1 node, 4 CPUs
lug 10 17:51:52 mulo kernel: smpboot: Total of 4 processors activated (15980.00 BogoMIPS)
lug 10 17:51:52 mulo kernel: Memory: 7910980K/8220696K available (18432K kernel code, 2673K rwdata, 14352K rodata, 4288K init, 4272K bss, 297504K reserved, 0K cma-reserved)
lug 10 17:51:52 mulo kernel: devtmpfs: initialized
lug 10 17:51:52 mulo kernel: x86/mm: Memory block size: 128MB
lug 10 17:51:52 mulo kernel: ACPI: PM: Registering ACPI NVS region [mem 0x79cc2000-0x79d21fff] (393216 bytes)
lug 10 17:51:52 mulo kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
lug 10 17:51:52 mulo kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
lug 10 17:51:52 mulo kernel: pinctrl core: initialized pinctrl subsystem
lug 10 17:51:52 mulo kernel: PM: RTC time: 15:49:05, date: 2025-07-10
lug 10 17:51:52 mulo kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
lug 10 17:51:52 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
lug 10 17:51:52 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
lug 10 17:51:52 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
lug 10 17:51:52 mulo kernel: audit: initializing netlink subsys (disabled)
lug 10 17:51:52 mulo kernel: audit: type=2000 audit(1752162545.083:1): state=initialized audit_enabled=0 res=1
lug 10 17:51:52 mulo kernel: thermal_sys: Registered thermal governor 'fair_share'
lug 10 17:51:52 mulo kernel: thermal_sys: Registered thermal governor 'bang_bang'
lug 10 17:51:52 mulo kernel: thermal_sys: Registered thermal governor 'step_wise'
lug 10 17:51:52 mulo kernel: thermal_sys: Registered thermal governor 'user_space'
lug 10 17:51:52 mulo kernel: thermal_sys: Registered thermal governor 'power_allocator'
lug 10 17:51:52 mulo kernel: cpuidle: using governor ladder
lug 10 17:51:52 mulo kernel: cpuidle: using governor menu
lug 10 17:51:52 mulo kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
lug 10 17:51:52 mulo kernel: PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
lug 10 17:51:52 mulo kernel: PCI: Using configuration type 1 for base access
lug 10 17:51:52 mulo kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
lug 10 17:51:52 mulo kernel: HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
lug 10 17:51:52 mulo kernel: HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
lug 10 17:51:52 mulo kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
lug 10 17:51:52 mulo kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
lug 10 17:51:52 mulo kernel: ACPI: Added _OSI(Module Device)
lug 10 17:51:52 mulo kernel: ACPI: Added _OSI(Processor Device)
lug 10 17:51:52 mulo kernel: ACPI: Added _OSI(Processor Aggregator Device)
lug 10 17:51:52 mulo kernel: ACPI: 9 ACPI AML tables successfully acquired and loaded
lug 10 17:51:52 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 10 17:51:52 mulo kernel: ACPI: SSDT 0xFFFF8CCEC1568400 000190 (v02 PmRef  Cpu0Cst  00003001 INTL 20160930)
lug 10 17:51:52 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 10 17:51:52 mulo kernel: ACPI: SSDT 0xFFFF8CCEC1569400 0001E6 (v02 PmRef  ApIst    00003000 INTL 20160930)
lug 10 17:51:52 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 10 17:51:52 mulo kernel: ACPI: SSDT 0xFFFF8CCEC0E76900 0000C9 (v02 PmRef  ApCst    00003000 INTL 20160930)
lug 10 17:51:52 mulo kernel: ACPI: EC: EC started
lug 10 17:51:52 mulo kernel: ACPI: EC: interrupt blocked
lug 10 17:51:52 mulo kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
lug 10 17:51:52 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC used to handle transactions
lug 10 17:51:52 mulo kernel: ACPI: Interpreter enabled
lug 10 17:51:52 mulo kernel: ACPI: PM: (supports S0 S3 S4 S5)
lug 10 17:51:52 mulo kernel: ACPI: Using IOAPIC for interrupt routing
lug 10 17:51:52 mulo kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
lug 10 17:51:52 mulo kernel: PCI: Using E820 reservations for host bridge windows
lug 10 17:51:52 mulo kernel: ACPI: Enabled 1 GPEs in block 00 to 7F
lug 10 17:51:52 mulo kernel: ACPI: \_SB_.PCI0.RP01.PXSX.DRST: New power resource
lug 10 17:51:52 mulo kernel: ACPI: \_SB_.PCI0.RP02.PXSX.DRST: New power resource
lug 10 17:51:52 mulo kernel: ACPI: \_SB_.PCI0.RP03.PXSX.DRST: New power resource
lug 10 17:51:52 mulo kernel: ACPI: \_SB_.PCI0.RP04.PXSX.DRST: New power resource
lug 10 17:51:52 mulo kernel: ACPI: \_SB_.PCI0.RP05.PXSX.DRST: New power resource
lug 10 17:51:52 mulo kernel: ACPI: \_SB_.PCI0.RP06.PXSX.DRST: New power resource
lug 10 17:51:52 mulo kernel: ACPI: \_SB_.PCI0.CNVW.WRST: New power resource
lug 10 17:51:52 mulo kernel: ACPI: \_TZ_.FN00: New power resource
lug 10 17:51:52 mulo kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
lug 10 17:51:52 mulo kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
lug 10 17:51:52 mulo kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
lug 10 17:51:52 mulo kernel: PCI host bridge to bus 0000:00
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [mem 0x7c000001-0xcfffffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
lug 10 17:51:52 mulo kernel: pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000 conventional PCI endpoint
lug 10 17:51:52 mulo kernel: pci 0000:00:02.0: [8086:3184] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
lug 10 17:51:52 mulo kernel: pci 0000:00:02.0: BAR 0 [mem 0xa0000000-0xa0ffffff 64bit]
lug 10 17:51:52 mulo kernel: pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref]
lug 10 17:51:52 mulo kernel: pci 0000:00:02.0: BAR 4 [io  0xf000-0xf03f]
lug 10 17:51:52 mulo kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
lug 10 17:51:52 mulo kernel: pci 0000:00:0c.0: [8086:31dc] type 00 class 0x028000 PCIe Root Complex Integrated Endpoint
lug 10 17:51:52 mulo kernel: pci 0000:00:0c.0: BAR 0 [mem 0xa1314000-0xa1317fff 64bit]
lug 10 17:51:52 mulo kernel: pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
lug 10 17:51:52 mulo kernel: pci 0000:00:0e.0: [8086:3198] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
lug 10 17:51:52 mulo kernel: pci 0000:00:0e.0: BAR 0 [mem 0xa1310000-0xa1313fff 64bit]
lug 10 17:51:52 mulo kernel: pci 0000:00:0e.0: BAR 4 [mem 0xa1000000-0xa10fffff 64bit]
lug 10 17:51:52 mulo kernel: pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
lug 10 17:51:52 mulo kernel: pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000 conventional PCI endpoint
lug 10 17:51:52 mulo kernel: pci 0000:00:0f.0: BAR 0 [mem 0xa131f000-0xa131ffff 64bit]
lug 10 17:51:52 mulo kernel: pci 0000:00:0f.0: PME# supported from D3hot
lug 10 17:51:52 mulo kernel: pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601 conventional PCI endpoint
lug 10 17:51:52 mulo kernel: pci 0000:00:12.0: BAR 0 [mem 0xa1318000-0xa1319fff]
lug 10 17:51:52 mulo kernel: pci 0000:00:12.0: BAR 1 [mem 0xa131e000-0xa131e0ff]
lug 10 17:51:52 mulo kernel: pci 0000:00:12.0: BAR 2 [io  0xf090-0xf097]
lug 10 17:51:52 mulo kernel: pci 0000:00:12.0: BAR 3 [io  0xf080-0xf083]
lug 10 17:51:52 mulo kernel: pci 0000:00:12.0: BAR 4 [io  0xf060-0xf07f]
lug 10 17:51:52 mulo kernel: pci 0000:00:12.0: BAR 5 [mem 0xa131d000-0xa131d7ff]
lug 10 17:51:52 mulo kernel: pci 0000:00:12.0: PME# supported from D3hot
lug 10 17:51:52 mulo kernel: pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400 PCIe Root Port
lug 10 17:51:52 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 10 17:51:52 mulo kernel: pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
lug 10 17:51:52 mulo kernel: pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
lug 10 17:51:52 mulo kernel: pci 0000:00:13.2: [8086:31da] type 01 class 0x060400 PCIe Root Port
lug 10 17:51:52 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 10 17:51:52 mulo kernel: pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
lug 10 17:51:52 mulo kernel: pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
lug 10 17:51:52 mulo kernel: pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
lug 10 17:51:52 mulo kernel: pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330 conventional PCI endpoint
lug 10 17:51:52 mulo kernel: pci 0000:00:15.0: BAR 0 [mem 0xa1300000-0xa130ffff 64bit]
lug 10 17:51:52 mulo kernel: pci 0000:00:15.0: PME# supported from D3hot D3cold
lug 10 17:51:52 mulo kernel: pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501 conventional PCI endpoint
lug 10 17:51:52 mulo kernel: pci 0000:00:1c.0: BAR 0 [mem 0xa131c000-0xa131cfff 64bit]
lug 10 17:51:52 mulo kernel: pci 0000:00:1c.0: BAR 2 [mem 0xa131b000-0xa131bfff 64bit]
lug 10 17:51:52 mulo kernel: pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100 conventional PCI endpoint
lug 10 17:51:52 mulo kernel: pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500 conventional PCI endpoint
lug 10 17:51:52 mulo kernel: pci 0000:00:1f.1: BAR 0 [mem 0xa131a000-0xa131a0ff 64bit]
lug 10 17:51:52 mulo kernel: pci 0000:00:1f.1: BAR 4 [io  0xf040-0xf05f]
lug 10 17:51:52 mulo kernel: pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000 PCIe Endpoint
lug 10 17:51:52 mulo kernel: pci 0000:01:00.0: BAR 0 [mem 0xa1200000-0xa1200fff]
lug 10 17:51:52 mulo kernel: pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
lug 10 17:51:52 mulo kernel: pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
lug 10 17:51:52 mulo kernel: pci 0000:01:00.0: supports D1 D2
lug 10 17:51:52 mulo kernel: pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
lug 10 17:51:52 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 10 17:51:52 mulo kernel: pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
lug 10 17:51:52 mulo kernel: pci 0000:02:00.0: BAR 0 [io  0xe000-0xe0ff]
lug 10 17:51:52 mulo kernel: pci 0000:02:00.0: BAR 2 [mem 0xa1104000-0xa1104fff 64bit]
lug 10 17:51:52 mulo kernel: pci 0000:02:00.0: BAR 4 [mem 0xa1100000-0xa1103fff 64bit]
lug 10 17:51:52 mulo kernel: pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
lug 10 17:51:52 mulo kernel: pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128)
lug 10 17:51:52 mulo kernel: pci 0000:02:00.0: supports D1 D2
lug 10 17:51:52 mulo kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
lug 10 17:51:52 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 10 17:51:52 mulo kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 3
lug 10 17:51:52 mulo kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 4
lug 10 17:51:52 mulo kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 5
lug 10 17:51:52 mulo kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 6
lug 10 17:51:52 mulo kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 7
lug 10 17:51:52 mulo kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 9
lug 10 17:51:52 mulo kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 10
lug 10 17:51:52 mulo kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 11
lug 10 17:51:52 mulo kernel: ACPI: EC: interrupt unblocked
lug 10 17:51:52 mulo kernel: ACPI: EC: event unblocked
lug 10 17:51:52 mulo kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
lug 10 17:51:52 mulo kernel: ACPI: EC: GPE=0x22
lug 10 17:51:52 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC initialization complete
lug 10 17:51:52 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: EC: Used to handle transactions and events
lug 10 17:51:52 mulo kernel: iommu: Default domain type: Translated
lug 10 17:51:52 mulo kernel: iommu: DMA domain TLB invalidation policy: lazy mode
lug 10 17:51:52 mulo kernel: SCSI subsystem initialized
lug 10 17:51:52 mulo kernel: libata version 3.00 loaded.
lug 10 17:51:52 mulo kernel: ACPI: bus type USB registered
lug 10 17:51:52 mulo kernel: usbcore: registered new interface driver usbfs
lug 10 17:51:52 mulo kernel: usbcore: registered new interface driver hub
lug 10 17:51:52 mulo kernel: usbcore: registered new device driver usb
lug 10 17:51:52 mulo kernel: EDAC MC: Ver: 3.0.0
lug 10 17:51:52 mulo kernel: efivars: Registered efivars operations
lug 10 17:51:52 mulo kernel: NetLabel: Initializing
lug 10 17:51:52 mulo kernel: NetLabel:  domain hash size = 128
lug 10 17:51:52 mulo kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
lug 10 17:51:52 mulo kernel: NetLabel:  unlabeled traffic allowed by default
lug 10 17:51:52 mulo kernel: mctp: management component transport protocol core
lug 10 17:51:52 mulo kernel: NET: Registered PF_MCTP protocol family
lug 10 17:51:52 mulo kernel: PCI: Using ACPI for IRQ routing
lug 10 17:51:52 mulo kernel: PCI: pci_cache_line_size set to 64 bytes
lug 10 17:51:52 mulo kernel: resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00
lug 10 17:51:52 mulo kernel: e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
lug 10 17:51:52 mulo kernel: e820: reserve RAM buffer [mem 0x00059000-0x0005ffff]
lug 10 17:51:52 mulo kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
lug 10 17:51:52 mulo kernel: e820: reserve RAM buffer [mem 0x73d75000-0x73ffffff]
lug 10 17:51:52 mulo kernel: e820: reserve RAM buffer [mem 0x773d9000-0x77ffffff]
lug 10 17:51:52 mulo kernel: e820: reserve RAM buffer [mem 0x7a565000-0x7bffffff]
lug 10 17:51:52 mulo kernel: e820: reserve RAM buffer [mem 0x7ac00000-0x7bffffff]
lug 10 17:51:52 mulo kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device
lug 10 17:51:52 mulo kernel: pci 0000:00:02.0: vgaarb: bridge control possible
lug 10 17:51:52 mulo kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
lug 10 17:51:52 mulo kernel: vgaarb: loaded
lug 10 17:51:52 mulo kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
lug 10 17:51:52 mulo kernel: hpet0: 8 comparators, 64-bit 19.200000 MHz counter
lug 10 17:51:52 mulo kernel: clocksource: Switched to clocksource tsc-early
lug 10 17:51:52 mulo kernel: VFS: Disk quotas dquot_6.6.0
lug 10 17:51:52 mulo kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
lug 10 17:51:52 mulo kernel: pnp: PnP ACPI init
lug 10 17:51:52 mulo kernel: system 00:00: [io  0x0a00-0x0a1f] has been reserved
lug 10 17:51:52 mulo kernel: system 00:00: [io  0x0a20-0x0a2f] has been reserved
lug 10 17:51:52 mulo kernel: system 00:00: [io  0x0a30-0x0a3f] has been reserved
lug 10 17:51:52 mulo kernel: system 00:00: [io  0x0a40-0x0a4f] has been reserved
lug 10 17:51:52 mulo kernel: system 00:00: [io  0x0a50-0x0a5f] has been reserved
lug 10 17:51:52 mulo kernel: system 00:00: [io  0x0a60-0x0a6f] has been reserved
lug 10 17:51:52 mulo kernel: system 00:01: [io  0x0680-0x069f] has been reserved
lug 10 17:51:52 mulo kernel: system 00:01: [io  0x0400-0x047f] could not be reserved
lug 10 17:51:52 mulo kernel: system 00:01: [io  0x0500-0x05fe] has been reserved
lug 10 17:51:52 mulo kernel: system 00:01: [io  0x0600-0x061f] has been reserved
lug 10 17:51:52 mulo kernel: system 00:01: [io  0x164e-0x164f] has been reserved
lug 10 17:51:52 mulo kernel: system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
lug 10 17:51:52 mulo kernel: system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
lug 10 17:51:52 mulo kernel: system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
lug 10 17:51:52 mulo kernel: system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
lug 10 17:51:52 mulo kernel: system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
lug 10 17:51:52 mulo kernel: system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
lug 10 17:51:52 mulo kernel: system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
lug 10 17:51:52 mulo kernel: system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
lug 10 17:51:52 mulo kernel: system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
lug 10 17:51:52 mulo kernel: pnp: PnP ACPI: found 4 devices
lug 10 17:51:52 mulo kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
lug 10 17:51:52 mulo kernel: NET: Registered PF_INET protocol family
lug 10 17:51:52 mulo kernel: IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
lug 10 17:51:52 mulo kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
lug 10 17:51:52 mulo kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
lug 10 17:51:52 mulo kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
lug 10 17:51:52 mulo kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
lug 10 17:51:52 mulo kernel: TCP: Hash tables configured (established 65536 bind 65536)
lug 10 17:51:52 mulo kernel: MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
lug 10 17:51:52 mulo kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
lug 10 17:51:52 mulo kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
lug 10 17:51:52 mulo kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
lug 10 17:51:52 mulo kernel: NET: Registered PF_XDP protocol family
lug 10 17:51:52 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 10 17:51:52 mulo kernel: pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
lug 10 17:51:52 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 10 17:51:52 mulo kernel: pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
lug 10 17:51:52 mulo kernel: pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 9 [mem 0x7c000001-0xcfffffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 10 [mem 0xe0000000-0xefffffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 11 [mem 0xfea00000-0xfeafffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 12 [mem 0xfed00000-0xfed003ff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 13 [mem 0xfed01000-0xfed01fff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 14 [mem 0xfed03000-0xfed03fff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 15 [mem 0xfed06000-0xfed06fff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 16 [mem 0xfed08000-0xfed09fff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 17 [mem 0xfed80000-0xfedbffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 18 [mem 0xfed1c000-0xfed1cfff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:00: resource 19 [mem 0xfee00000-0xfeefffff window]
lug 10 17:51:52 mulo kernel: pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff]
lug 10 17:51:52 mulo kernel: pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
lug 10 17:51:52 mulo kernel: pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa11fffff]
lug 10 17:51:52 mulo kernel: PCI: CLS 64 bytes, default 64
lug 10 17:51:52 mulo kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
lug 10 17:51:52 mulo kernel: software IO TLB: mapped [mem 0x000000006ede1000-0x0000000072de1000] (64MB)
lug 10 17:51:52 mulo kernel: Trying to unpack rootfs image as initramfs...
lug 10 17:51:52 mulo kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
lug 10 17:51:52 mulo kernel: clocksource: Switched to clocksource tsc
lug 10 17:51:52 mulo kernel: Initialise system trusted keyrings
lug 10 17:51:52 mulo kernel: Key type blacklist registered
lug 10 17:51:52 mulo kernel: workingset: timestamp_bits=36 max_order=21 bucket_order=0
lug 10 17:51:52 mulo kernel: fuse: init (API version 7.41)
lug 10 17:51:52 mulo kernel: integrity: Platform Keyring initialized
lug 10 17:51:52 mulo kernel: integrity: Machine keyring initialized
lug 10 17:51:52 mulo kernel: Key type asymmetric registered
lug 10 17:51:52 mulo kernel: Asymmetric key parser 'x509' registered
lug 10 17:51:52 mulo kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
lug 10 17:51:52 mulo kernel: io scheduler mq-deadline registered
lug 10 17:51:52 mulo kernel: io scheduler kyber registered
lug 10 17:51:52 mulo kernel: io scheduler bfq registered
lug 10 17:51:52 mulo kernel: ledtrig-cpu: registered to indicate activity on CPUs
lug 10 17:51:52 mulo kernel: pcieport 0000:00:13.0: PME: Signaling with IRQ 120
lug 10 17:51:52 mulo kernel: pcieport 0000:00:13.2: PME: Signaling with IRQ 121
lug 10 17:51:52 mulo kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lug 10 17:51:52 mulo kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
lug 10 17:51:52 mulo kernel: ACPI: button: Power Button [PWRB]
lug 10 17:51:52 mulo kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
lug 10 17:51:52 mulo kernel: ACPI: button: Sleep Button [SLPB]
lug 10 17:51:52 mulo kernel: thermal LNXTHERM:00: registered as thermal_zone0
lug 10 17:51:52 mulo kernel: ACPI: thermal: Thermal Zone [TZ01] (53 C)
lug 10 17:51:52 mulo kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
lug 10 17:51:52 mulo kernel: Non-volatile memory driver v1.3
lug 10 17:51:52 mulo kernel: Linux agpgart interface v0.103
lug 10 17:51:52 mulo kernel: ACPI: bus type drm_connector registered
lug 10 17:51:52 mulo kernel: ahci 0000:00:12.0: version 3.0
lug 10 17:51:52 mulo kernel: ahci 0000:00:12.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
lug 10 17:51:52 mulo kernel: ahci 0000:00:12.0: 2/2 ports implemented (port mask 0x3)
lug 10 17:51:52 mulo kernel: ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst 
lug 10 17:51:52 mulo kernel: scsi host0: ahci
lug 10 17:51:52 mulo kernel: scsi host1: ahci
lug 10 17:51:52 mulo kernel: ata1: SATA max UDMA/133 abar m2048@0xa131d000 port 0xa131d100 irq 122 lpm-pol 3
lug 10 17:51:52 mulo kernel: ata2: SATA max UDMA/133 abar m2048@0xa131d000 port 0xa131d180 irq 122 lpm-pol 3
lug 10 17:51:52 mulo kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
lug 10 17:51:52 mulo kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
lug 10 17:51:52 mulo kernel: xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
lug 10 17:51:52 mulo kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
lug 10 17:51:52 mulo kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
lug 10 17:51:52 mulo kernel: xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
lug 10 17:51:52 mulo kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
lug 10 17:51:52 mulo kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
lug 10 17:51:52 mulo kernel: usb usb1: Product: xHCI Host Controller
lug 10 17:51:52 mulo kernel: usb usb1: Manufacturer: Linux 6.12.36-1-lts xhci-hcd
lug 10 17:51:52 mulo kernel: usb usb1: SerialNumber: 0000:00:15.0
lug 10 17:51:52 mulo kernel: hub 1-0:1.0: USB hub found
lug 10 17:51:52 mulo kernel: hub 1-0:1.0: 9 ports detected
lug 10 17:51:52 mulo kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
lug 10 17:51:52 mulo kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
lug 10 17:51:52 mulo kernel: usb usb2: Product: xHCI Host Controller
lug 10 17:51:52 mulo kernel: usb usb2: Manufacturer: Linux 6.12.36-1-lts xhci-hcd
lug 10 17:51:52 mulo kernel: usb usb2: SerialNumber: 0000:00:15.0
lug 10 17:51:52 mulo kernel: hub 2-0:1.0: USB hub found
lug 10 17:51:52 mulo kernel: hub 2-0:1.0: 7 ports detected
lug 10 17:51:52 mulo kernel: usbcore: registered new interface driver usbserial_generic
lug 10 17:51:52 mulo kernel: usbserial: USB Serial support registered for generic
lug 10 17:51:52 mulo kernel: rtc_cmos 00:03: RTC can wake from S4
lug 10 17:51:52 mulo kernel: rtc_cmos 00:03: registered as rtc0
lug 10 17:51:52 mulo kernel: rtc_cmos 00:03: setting system clock to 2025-07-10T15:49:05 UTC (1752162545)
lug 10 17:51:52 mulo kernel: rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
lug 10 17:51:52 mulo kernel: intel_pstate: Intel P-state driver initializing
lug 10 17:51:52 mulo kernel: simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
lug 10 17:51:52 mulo kernel: [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
lug 10 17:51:52 mulo kernel: fbcon: Deferring console take-over
lug 10 17:51:52 mulo kernel: simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
lug 10 17:51:52 mulo kernel: hid: raw HID events driver (C) Jiri Kosina
lug 10 17:51:52 mulo kernel: drop_monitor: Initializing network drop monitor service
lug 10 17:51:52 mulo kernel: NET: Registered PF_INET6 protocol family
lug 10 17:51:52 mulo kernel: Freeing initrd memory: 31692K
lug 10 17:51:52 mulo kernel: Segment Routing with IPv6
lug 10 17:51:52 mulo kernel: RPL Segment Routing with IPv6
lug 10 17:51:52 mulo kernel: In-situ OAM (IOAM) with IPv6
lug 10 17:51:52 mulo kernel: NET: Registered PF_PACKET protocol family
lug 10 17:51:52 mulo kernel: microcode: Current revision: 0x00000026
lug 10 17:51:52 mulo kernel: microcode: Updated early from: 0x0000001a
lug 10 17:51:52 mulo kernel: resctrl: L2 allocation detected
lug 10 17:51:52 mulo kernel: IPI shorthand broadcast: enabled
lug 10 17:51:52 mulo kernel: sched_clock: Marking stable (533335968, 4044976)->(539765042, -2384098)
lug 10 17:51:52 mulo kernel: registered taskstats version 1
lug 10 17:51:52 mulo kernel: Loading compiled-in X.509 certificates
lug 10 17:51:52 mulo kernel: Loaded X.509 cert 'Build time autogenerated kernel key: eee451ffdd9026577431c4c9a3bfa8216a157637'
lug 10 17:51:52 mulo kernel: zswap: loaded using pool zstd/zsmalloc
lug 10 17:51:52 mulo kernel: Demotion targets for Node 0: null
lug 10 17:51:52 mulo kernel: Key type .fscrypt registered
lug 10 17:51:52 mulo kernel: Key type fscrypt-provisioning registered
lug 10 17:51:52 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 10 17:51:52 mulo kernel: integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
lug 10 17:51:52 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 10 17:51:52 mulo kernel: integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
lug 10 17:51:52 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 10 17:51:52 mulo kernel: integrity: Loaded X.509 cert 'CISD FW Update - Certificate: 068268b4a41c93854262d49b4f788f13'
lug 10 17:51:52 mulo kernel: PM:   Magic number: 1:137:841
lug 10 17:51:52 mulo kernel: RAS: Correctable Errors collector initialized.
lug 10 17:51:52 mulo kernel: clk: Disabling unused clocks
lug 10 17:51:52 mulo kernel: PM: genpd: Disabling unused power domains
lug 10 17:51:52 mulo kernel: usb 1-2: new high-speed USB device number 2 using xhci_hcd
lug 10 17:51:52 mulo kernel: ata2: SATA link down (SStatus 4 SControl 300)
lug 10 17:51:52 mulo kernel: usb 1-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 0.03
lug 10 17:51:52 mulo kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 10 17:51:52 mulo kernel: usb 1-2: Product: USB2.1 Hub
lug 10 17:51:52 mulo kernel: usb 1-2: Manufacturer: Generic
lug 10 17:51:52 mulo kernel: hub 1-2:1.0: USB hub found
lug 10 17:51:52 mulo kernel: hub 1-2:1.0: 4 ports detected
lug 10 17:51:52 mulo kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
lug 10 17:51:52 mulo kernel: ata1.00: Model 'Samsung SSD 860 EVO 250GB', rev 'RVT01B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
lug 10 17:51:52 mulo kernel: ata1.00: supports DRM functions and may not be fully accessible
lug 10 17:51:52 mulo kernel: ata1.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
lug 10 17:51:52 mulo kernel: ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
lug 10 17:51:52 mulo kernel: ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
lug 10 17:51:52 mulo kernel: ata1.00: supports DRM functions and may not be fully accessible
lug 10 17:51:52 mulo kernel: ata1.00: configured for UDMA/133
lug 10 17:51:52 mulo kernel: ahci 0000:00:12.0: port does not support device sleep
lug 10 17:51:52 mulo kernel: scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
lug 10 17:51:52 mulo kernel: ata1.00: Enabling discard_zeroes_data
lug 10 17:51:52 mulo kernel: sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
lug 10 17:51:52 mulo kernel: sd 0:0:0:0: [sda] Write Protect is off
lug 10 17:51:52 mulo kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
lug 10 17:51:52 mulo kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 10 17:51:52 mulo kernel: sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
lug 10 17:51:52 mulo kernel: ata1.00: Enabling discard_zeroes_data
lug 10 17:51:52 mulo kernel: usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
lug 10 17:51:52 mulo kernel: usb 2-1: New USB device found, idVendor=152d, idProduct=0576, bcdDevice=41.01
lug 10 17:51:52 mulo kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
lug 10 17:51:52 mulo kernel: usb 2-1: Product: ANKEJE USB3.0
lug 10 17:51:52 mulo kernel: usb 2-1: Manufacturer: ANKEJE USB3.0
lug 10 17:51:52 mulo kernel: usb 2-1: SerialNumber: DD56419883014
lug 10 17:51:52 mulo kernel:  sda: sda1 sda2
lug 10 17:51:52 mulo kernel: sd 0:0:0:0: [sda] supports TCG Opal
lug 10 17:51:52 mulo kernel: sd 0:0:0:0: [sda] Attached SCSI disk
lug 10 17:51:52 mulo kernel: Freeing unused decrypted memory: 2028K
lug 10 17:51:52 mulo kernel: Freeing unused kernel image (initmem) memory: 4288K
lug 10 17:51:52 mulo kernel: Write protecting the kernel read-only data: 34816k
lug 10 17:51:52 mulo kernel: Freeing unused kernel image (rodata/data gap) memory: 2032K
lug 10 17:51:52 mulo kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
lug 10 17:51:52 mulo kernel: rodata_test: all tests were successful
lug 10 17:51:52 mulo kernel: Run /init as init process
lug 10 17:51:52 mulo kernel:   with arguments:
lug 10 17:51:52 mulo kernel:     /init
lug 10 17:51:52 mulo kernel:   with environment:
lug 10 17:51:52 mulo kernel:     HOME=/
lug 10 17:51:52 mulo kernel:     TERM=linux
lug 10 17:51:52 mulo kernel:     BOOT_IMAGE=/vmlinuz-linux-lts
lug 10 17:51:52 mulo kernel:     cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm
lug 10 17:51:52 mulo kernel: usb 1-9: new full-speed USB device number 3 using xhci_hcd
lug 10 17:51:52 mulo kernel: usb 1-9: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
lug 10 17:51:52 mulo kernel: usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
lug 10 17:51:52 mulo kernel: rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
lug 10 17:51:52 mulo kernel: cryptd: max_cpu_qlen set to 1000
lug 10 17:51:52 mulo kernel: sdhci: Secure Digital Host Controller Interface driver
lug 10 17:51:52 mulo kernel: sdhci: Copyright(c) Pierre Ossman
lug 10 17:51:52 mulo kernel: sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 6)
lug 10 17:51:52 mulo kernel: mmc0: CQHCI version 5.10
lug 10 17:51:52 mulo kernel: mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
lug 10 17:51:52 mulo kernel: usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
lug 10 17:51:52 mulo kernel: usb 2-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 0.03
lug 10 17:51:52 mulo kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 10 17:51:52 mulo kernel: usb 2-2: Product: USB3.2 Hub
lug 10 17:51:52 mulo kernel: usb 2-2: Manufacturer: Generic
lug 10 17:51:52 mulo kernel: hub 2-2:1.0: USB hub found
lug 10 17:51:52 mulo kernel: hub 2-2:1.0: 4 ports detected
lug 10 17:51:52 mulo kernel: usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
lug 10 17:51:52 mulo kernel: mmc0: Failed to initialize a non-removable card
lug 10 17:51:52 mulo kernel: usb 1-2.1: New USB device found, idVendor=1997, idProduct=2433, bcdDevice=20.12
lug 10 17:51:52 mulo kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 10 17:51:52 mulo kernel: usb 1-2.1: Product: Mini Keyboard
lug 10 17:51:52 mulo kernel: usb 1-2.1: Manufacturer:  
lug 10 17:51:52 mulo kernel: usbcore: registered new interface driver usbhid
lug 10 17:51:52 mulo kernel: usbhid: USB HID core driver
lug 10 17:51:52 mulo kernel: input:   Mini Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:1997:2433.0001/input/input2
lug 10 17:51:52 mulo kernel: usb 2-3: new SuperSpeed USB device number 4 using xhci_hcd
lug 10 17:51:52 mulo kernel: usb 2-3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 10 17:51:52 mulo kernel: usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 10 17:51:52 mulo kernel: usb 2-3: Product: Ugreen Storage Device
lug 10 17:51:52 mulo kernel: usb 2-3: Manufacturer: Ugreen
lug 10 17:51:52 mulo kernel: usb 2-3: SerialNumber: 022004019C85
lug 10 17:51:52 mulo kernel: hid-generic 0003:1997:2433.0001: input,hidraw0: USB HID v1.01 Keyboard [  Mini Keyboard] on usb-0000:00:15.0-2.1/input0
lug 10 17:51:52 mulo kernel: input:   Mini Keyboard Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input3
lug 10 17:51:52 mulo kernel: input:   Mini Keyboard System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input4
lug 10 17:51:52 mulo kernel: usb 2-2.2: new SuperSpeed USB device number 5 using xhci_hcd
lug 10 17:51:52 mulo kernel: input:   Mini Keyboard Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input5
lug 10 17:51:52 mulo kernel: hid-generic 0003:1997:2433.0002: input,hidraw1: USB HID v1.01 Mouse [  Mini Keyboard] on usb-0000:00:15.0-2.1/input1
lug 10 17:51:52 mulo kernel: usb 2-2.2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 10 17:51:52 mulo kernel: usb 2-2.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 10 17:51:52 mulo kernel: usb 2-2.2: Product: ASM105x
lug 10 17:51:52 mulo kernel: usb 2-2.2: Manufacturer: ASMT
lug 10 17:51:52 mulo kernel: usb 2-2.2: SerialNumber: 12345679818C
lug 10 17:51:52 mulo kernel: usb 2-4: new SuperSpeed USB device number 6 using xhci_hcd
lug 10 17:51:52 mulo kernel: usb 2-4: New USB device found, idVendor=1058, idProduct=1230, bcdDevice=10.50
lug 10 17:51:52 mulo kernel: usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 10 17:51:52 mulo kernel: usb 2-4: Product: My Book 1230
lug 10 17:51:52 mulo kernel: usb 2-4: Manufacturer: Western Digital
lug 10 17:51:52 mulo kernel: usb 2-4: SerialNumber: 574343344530393137333939
lug 10 17:51:52 mulo kernel: usb 2-1: UAS is ignored for this device, using usb-storage instead
lug 10 17:51:52 mulo kernel: usb-storage 2-1:1.0: USB Mass Storage device detected
lug 10 17:51:52 mulo kernel: usb-storage 2-1:1.0: Quirks match for vid 152d pid 0576: 800000
lug 10 17:51:52 mulo kernel: scsi host2: usb-storage 2-1:1.0
lug 10 17:51:52 mulo kernel: usb 2-3: UAS is ignored for this device, using usb-storage instead
lug 10 17:51:52 mulo kernel: usb-storage 2-3:1.0: USB Mass Storage device detected
lug 10 17:51:52 mulo kernel: usb-storage 2-3:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 10 17:51:52 mulo kernel: scsi host3: usb-storage 2-3:1.0
lug 10 17:51:52 mulo kernel: usb 2-2.2: UAS is ignored for this device, using usb-storage instead
lug 10 17:51:52 mulo kernel: usb-storage 2-2.2:1.0: USB Mass Storage device detected
lug 10 17:51:52 mulo kernel: usb-storage 2-2.2:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 10 17:51:52 mulo kernel: scsi host4: usb-storage 2-2.2:1.0
lug 10 17:51:52 mulo kernel: usb-storage 2-4:1.0: USB Mass Storage device detected
lug 10 17:51:52 mulo kernel: usb-storage 2-4:1.0: Quirks match for vid 1058 pid 1230: 800000
lug 10 17:51:52 mulo kernel: scsi host5: usb-storage 2-4:1.0
lug 10 17:51:52 mulo kernel: usbcore: registered new interface driver usb-storage
lug 10 17:51:52 mulo kernel: usbcore: registered new interface driver uas
lug 10 17:51:52 mulo kernel: device-mapper: uevent: version 1.0.3
lug 10 17:51:52 mulo kernel: device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
lug 10 17:51:52 mulo kernel: Key type encrypted registered
lug 10 17:51:52 mulo kernel: fbcon: Taking over console
lug 10 17:51:52 mulo kernel: Console: switching to colour frame buffer device 128x48
lug 10 17:51:52 mulo kernel: scsi 3:0:0:0: Direct-Access     TOSHIBA  MQ01ABD100       0    PQ: 0 ANSI: 6
lug 10 17:51:52 mulo kernel: scsi 5:0:0:0: Direct-Access     WD       My Book 1230     1050 PQ: 0 ANSI: 6
lug 10 17:51:52 mulo kernel: scsi 4:0:0:0: Direct-Access     ASMT     ASM105x          0    PQ: 0 ANSI: 6
lug 10 17:51:52 mulo kernel: scsi 2:0:0:0: Direct-Access     ANKEJE   USB3.0           4101 PQ: 0 ANSI: 6
lug 10 17:51:52 mulo kernel: scsi 5:0:0:1: Enclosure         WD       SES Device       1050 PQ: 0 ANSI: 6
lug 10 17:51:52 mulo kernel: sd 5:0:0:0: [sdb] 976746240 4096-byte logical blocks: (4.00 TB/3.64 TiB)
lug 10 17:51:52 mulo kernel: sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 10 17:51:52 mulo kernel: sd 4:0:0:0: [sdd] 4096-byte physical blocks
lug 10 17:51:52 mulo kernel: sd 5:0:0:0: [sdb] Write Protect is off
lug 10 17:51:52 mulo kernel: sd 5:0:0:0: [sdb] Mode Sense: 53 00 10 08
lug 10 17:51:52 mulo kernel: sd 4:0:0:0: [sdd] Write Protect is off
lug 10 17:51:52 mulo kernel: sd 4:0:0:0: [sdd] Mode Sense: 43 00 00 00
lug 10 17:51:53 mulo kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 10 17:51:53 mulo kernel: sd 3:0:0:0: [sdc] 4096-byte physical blocks
lug 10 17:51:53 mulo kernel: sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 10 17:51:53 mulo kernel: sd 2:0:0:0: [sde] 500118192 512-byte logical blocks: (256 GB/238 GiB)
lug 10 17:51:53 mulo kernel: sd 3:0:0:0: [sdc] Write Protect is off
lug 10 17:51:53 mulo kernel: sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00
lug 10 17:51:53 mulo kernel: sd 5:0:0:0: [sdb] No Caching mode page found
lug 10 17:51:53 mulo kernel: sd 5:0:0:0: [sdb] Assuming drive cache: write through
lug 10 17:51:53 mulo kernel: sd 2:0:0:0: [sde] Write Protect is off
lug 10 17:51:53 mulo kernel: sd 2:0:0:0: [sde] Mode Sense: 47 00 00 08
lug 10 17:51:53 mulo kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 10 17:51:53 mulo kernel: sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 10 17:51:53 mulo kernel:  sdd: sdd1
lug 10 17:51:53 mulo kernel: sd 4:0:0:0: [sdd] Attached SCSI disk
lug 10 17:51:53 mulo kernel:  sde: sde1
lug 10 17:51:53 mulo kernel: sd 2:0:0:0: [sde] Attached SCSI disk
lug 10 17:51:53 mulo kernel:  sdb: sdb1
lug 10 17:51:53 mulo kernel: sd 5:0:0:0: [sdb] Attached SCSI disk
lug 10 17:51:53 mulo kernel:  sdc: sdc1
lug 10 17:51:53 mulo kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
lug 10 17:51:53 mulo kernel: scsi 5:0:0:1: Failed to get diagnostic page 0x1
lug 10 17:51:53 mulo kernel: scsi 5:0:0:1: Failed to bind enclosure -19
lug 10 17:51:53 mulo kernel: ses 5:0:0:1: Attached Enclosure device
lug 10 17:51:53 mulo kernel: EXT4-fs (dm-1): mounted filesystem 16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12 r/w with ordered data mode. Quota mode: none.
lug 10 17:51:53 mulo systemd[1]: systemd 257.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
lug 10 17:51:53 mulo systemd[1]: Detected architecture x86-64.
lug 10 17:51:53 mulo systemd[1]: Hostname set to <mulo>.
lug 10 17:51:53 mulo systemd[1]: bpf-restrict-fs: LSM BPF program attached
lug 10 17:51:53 mulo systemd[1]: Queued start job for default target Graphical Interface.
lug 10 17:51:53 mulo systemd[1]: Created slice Slice /system/dirmngr.
lug 10 17:51:53 mulo systemd[1]: Created slice Slice /system/getty.
lug 10 17:51:53 mulo systemd[1]: Created slice Slice /system/gpg-agent.
lug 10 17:51:53 mulo systemd[1]: Created slice Slice /system/gpg-agent-browser.
lug 10 17:51:53 mulo systemd[1]: Created slice Slice /system/gpg-agent-extra.
lug 10 17:51:53 mulo systemd[1]: Created slice Slice /system/gpg-agent-ssh.
lug 10 17:51:53 mulo systemd[1]: Created slice Slice /system/keyboxd.
lug 10 17:51:53 mulo systemd[1]: Created slice Slice /system/modprobe.
lug 10 17:51:53 mulo systemd[1]: Created slice Encrypted Volume Units Service Slice.
lug 10 17:51:53 mulo systemd[1]: Created slice Slice /system/systemd-fsck.
lug 10 17:51:53 mulo systemd[1]: Created slice Slice /system/vncserver.
lug 10 17:51:53 mulo systemd[1]: Created slice User and Session Slice.
lug 10 17:51:53 mulo systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
lug 10 17:51:53 mulo systemd[1]: Started Forward Password Requests to Wall Directory Watch.
lug 10 17:51:53 mulo systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
lug 10 17:51:53 mulo systemd[1]: Expecting device /dev/disk/by-uuid/00d46560-89a9-4027-93d5-71fa2c8e247e...
lug 10 17:51:53 mulo systemd[1]: Expecting device /dev/disk/by-uuid/245c388e-dec5-4ba7-adf9-c4da95835a16...
lug 10 17:51:53 mulo systemd[1]: Expecting device /dev/disk/by-uuid/6401ad98-a5cf-4ccd-bc97-90d098f9368f...
lug 10 17:51:53 mulo systemd[1]: Expecting device /dev/disk/by-uuid/9f40d3cb-e5ce-4877-bf27-e57d966cd4a4...
lug 10 17:51:53 mulo systemd[1]: Expecting device /dev/disk/by-uuid/BD2A-C15F...
lug 10 17:51:53 mulo systemd[1]: Expecting device /dev/disk/by-uuid/a7818834-7865-407a-b44f-53fcb81be83d...
lug 10 17:51:53 mulo systemd[1]: Expecting device /dev/disk/by-uuid/c561c919-b617-492a-830c-74ababade132...
lug 10 17:51:53 mulo systemd[1]: Expecting device /dev/disk/by-uuid/d405b74f-f22e-4973-86de-a17460f2b1af...
lug 10 17:51:53 mulo systemd[1]: Expecting device /dev/disk/by-uuid/daa95dca-bdba-4e23-ac42-5e9cc33053bc...
lug 10 17:51:53 mulo systemd[1]: Expecting device /dev/disk/by-uuid/dad2d9f0-d032-4959-a92a-b15945b9867b...
lug 10 17:51:53 mulo systemd[1]: Expecting device /dev/disk/by-uuid/e10ab897-b1af-45c8-bb93-9a85d0561900...
lug 10 17:51:53 mulo systemd[1]: Reached target Local Encrypted Volumes.
lug 10 17:51:53 mulo systemd[1]: Reached target Login Prompts.
lug 10 17:51:53 mulo systemd[1]: Reached target Local Integrity Protected Volumes.
lug 10 17:51:53 mulo systemd[1]: Reached target Path Units.
lug 10 17:51:53 mulo systemd[1]: Reached target Remote File Systems.
lug 10 17:51:53 mulo systemd[1]: Reached target Slice Units.
lug 10 17:51:53 mulo systemd[1]: Reached target Swaps.
lug 10 17:51:53 mulo systemd[1]: Reached target Local Verity Protected Volumes.
lug 10 17:51:53 mulo systemd[1]: Listening on Device-mapper event daemon FIFOs.
lug 10 17:51:53 mulo systemd[1]: Listening on LVM2 poll daemon socket.
lug 10 17:51:53 mulo systemd[1]: Listening on Process Core Dump Socket.
lug 10 17:51:53 mulo systemd[1]: Listening on Credential Encryption/Decryption.
lug 10 17:51:53 mulo systemd[1]: Listening on Journal Socket (/dev/log).
lug 10 17:51:53 mulo systemd[1]: Listening on Journal Sockets.
lug 10 17:51:53 mulo systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 10 17:51:53 mulo systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 10 17:51:53 mulo systemd[1]: Listening on udev Control Socket.
lug 10 17:51:53 mulo systemd[1]: Listening on udev Kernel Socket.
lug 10 17:51:53 mulo systemd[1]: Mounting Huge Pages File System...
lug 10 17:51:53 mulo systemd[1]: Mounting POSIX Message Queue File System...
lug 10 17:51:53 mulo systemd[1]: Mounting Kernel Debug File System...
lug 10 17:51:53 mulo systemd[1]: Mounting Kernel Trace File System...
lug 10 17:51:53 mulo systemd[1]: Mounting Temporary Directory /tmp...
lug 10 17:51:53 mulo systemd[1]: Starting Create List of Static Device Nodes...
lug 10 17:51:53 mulo systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
lug 10 17:51:53 mulo systemd[1]: Starting Load Kernel Module configfs...
lug 10 17:51:53 mulo systemd[1]: Starting Load Kernel Module dm_mod...
lug 10 17:51:53 mulo systemd[1]: Starting Load Kernel Module drm...
lug 10 17:51:53 mulo systemd[1]: Starting Load Kernel Module fuse...
lug 10 17:51:53 mulo systemd[1]: Starting Load Kernel Module loop...
lug 10 17:51:53 mulo systemd[1]: Starting Mullvad early boot network blocker...
lug 10 17:51:53 mulo systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
lug 10 17:51:53 mulo systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
lug 10 17:51:53 mulo systemd[1]: Starting Journal Service...
lug 10 17:51:53 mulo systemd[1]: Starting Load Kernel Modules...
lug 10 17:51:53 mulo systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 10 17:51:53 mulo systemd[1]: Starting Remount Root and Kernel File Systems...
lug 10 17:51:53 mulo systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 10 17:51:53 mulo systemd[1]: Starting Load udev Rules from Credentials...
lug 10 17:51:53 mulo kernel: loop: module loaded
lug 10 17:51:53 mulo systemd[1]: Starting Coldplug All udev Devices...
lug 10 17:51:53 mulo systemd[1]: Mounted Huge Pages File System.
lug 10 17:51:53 mulo systemd[1]: Mounted POSIX Message Queue File System.
lug 10 17:51:53 mulo systemd[1]: Mounted Kernel Debug File System.
lug 10 17:51:53 mulo systemd[1]: Mounted Kernel Trace File System.
lug 10 17:51:53 mulo systemd[1]: Mounted Temporary Directory /tmp.
lug 10 17:51:53 mulo systemd[1]: Finished Create List of Static Device Nodes.
lug 10 17:51:53 mulo systemd[1]: modprobe@configfs.service: Deactivated successfully.
lug 10 17:51:53 mulo systemd[1]: Finished Load Kernel Module configfs.
lug 10 17:51:53 mulo systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
lug 10 17:51:53 mulo systemd[1]: Finished Load Kernel Module dm_mod.
lug 10 17:51:53 mulo systemd[1]: modprobe@drm.service: Deactivated successfully.
lug 10 17:51:53 mulo systemd[1]: Finished Load Kernel Module drm.
lug 10 17:51:53 mulo systemd[1]: modprobe@fuse.service: Deactivated successfully.
lug 10 17:51:53 mulo systemd[1]: Finished Load Kernel Module fuse.
lug 10 17:51:53 mulo systemd[1]: modprobe@loop.service: Deactivated successfully.
lug 10 17:51:53 mulo systemd[1]: Finished Load Kernel Module loop.
lug 10 17:51:53 mulo systemd[1]: Finished Load Kernel Modules.
lug 10 17:51:53 mulo systemd[1]: Mounting FUSE Control File System...
lug 10 17:51:53 mulo systemd[1]: Mounting Kernel Configuration File System...
lug 10 17:51:53 mulo systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
lug 10 17:51:53 mulo systemd[1]: Starting Apply Kernel Variables...
lug 10 17:51:53 mulo systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
lug 10 17:51:53 mulo systemd[1]: Finished Load udev Rules from Credentials.
lug 10 17:51:53 mulo kernel: EXT4-fs (dm-1): re-mounted 16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12.
lug 10 17:51:53 mulo systemd[1]: Finished Remount Root and Kernel File Systems.
lug 10 17:51:53 mulo systemd-journald[388]: Collecting audit messages is disabled.
lug 10 17:51:53 mulo systemd[1]: Mounted FUSE Control File System.
lug 10 17:51:53 mulo systemd[1]: Mounted Kernel Configuration File System.
lug 10 17:51:53 mulo systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
lug 10 17:51:53 mulo systemd[1]: Starting Load/Save OS Random Seed...
lug 10 17:51:53 mulo systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 10 17:51:53 mulo systemd[1]: Finished Apply Kernel Variables.
lug 10 17:51:53 mulo systemd[1]: Finished Load/Save OS Random Seed.
lug 10 17:51:53 mulo systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
lug 10 17:51:53 mulo systemd[1]: Create System Users was skipped because no trigger condition checks were met.
lug 10 17:51:53 mulo systemd[1]: Starting Network Name Resolution...
lug 10 17:51:53 mulo systemd[1]: Starting Network Time Synchronization...
lug 10 17:51:53 mulo systemd[1]: Starting Create Static Device Nodes in /dev...
lug 10 17:51:53 mulo systemd[1]: Started Journal Service.
lug 10 17:51:53 mulo systemd-journald[388]: Received client request to flush runtime journal.
lug 10 17:51:53 mulo systemd-journald[388]: File /var/log/journal/e591095cf0554dfca6c4c75cb8dbfcd0/system.journal corrupted or uncleanly shut down, renaming and replacing.
lug 10 17:51:53 mulo kernel: mousedev: PS/2 mouse device common for all mice
lug 10 17:51:53 mulo kernel: lpc_ich 0000:00:1f.0: No MFD cells added
lug 10 17:51:53 mulo kernel: i801_smbus 0000:00:1f.1: SPD Write Disable is set
lug 10 17:51:53 mulo kernel: i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
lug 10 17:51:53 mulo kernel: i2c i2c-0: Successfully instantiated SPD at 0x50
lug 10 17:51:53 mulo kernel: input: PC Speaker as /devices/platform/pcspkr/input/input6
lug 10 17:51:53 mulo kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
lug 10 17:51:53 mulo kernel: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
lug 10 17:51:53 mulo kernel: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
lug 10 17:51:53 mulo kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
lug 10 17:51:53 mulo kernel: cfg80211: failed to load regulatory.db
lug 10 17:51:53 mulo kernel: Bluetooth: Core ver 2.22
lug 10 17:51:53 mulo kernel: NET: Registered PF_BLUETOOTH protocol family
lug 10 17:51:53 mulo kernel: Bluetooth: HCI device and connection manager initialized
lug 10 17:51:53 mulo kernel: Bluetooth: HCI socket layer initialized
lug 10 17:51:53 mulo kernel: Bluetooth: L2CAP socket layer initialized
lug 10 17:51:53 mulo kernel: Bluetooth: SCO socket layer initialized
lug 10 17:51:53 mulo kernel: r8169 0000:02:00.0 eth0: RTL8168h/8111h, 1c:69:7a:af:b4:46, XID 541, IRQ 130
lug 10 17:51:53 mulo kernel: r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
lug 10 17:51:53 mulo kernel: RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
lug 10 17:51:53 mulo kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
lug 10 17:51:53 mulo kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
lug 10 17:51:53 mulo kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
lug 10 17:51:53 mulo kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
lug 10 17:51:53 mulo kernel: ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
lug 10 17:51:53 mulo kernel: r8169 0000:02:00.0 eno1: renamed from eth0
lug 10 17:51:53 mulo kernel: Intel(R) Wireless WiFi driver for Linux
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: enabling device (0000 -> 0002)
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: Detected crf-id 0x2816, cnv-id 0x1000100 wfpm id 0x80000000
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: PCI dev 31dc/02a4, rev=0x312, rfid=0x108110
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: Detected Intel(R) Wireless-AC 9462
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 0
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 1
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 2
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 3
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 4
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 6
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 8
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 9
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 10
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 11
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 15
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 16
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 18
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 19
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 20
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 21
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 28
lug 10 17:51:53 mulo kernel: iwlwifi 0000:00:0c.0: loaded firmware version 46.7e3e4b69.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
lug 10 17:51:53 mulo kernel: pps_core: LinuxPPS API ver. 1 registered
lug 10 17:51:53 mulo kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
lug 10 17:51:53 mulo kernel: PTP clock support registered
lug 10 17:51:54 mulo kernel: usbcore: registered new interface driver btusb
lug 10 17:51:54 mulo kernel: Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
lug 10 17:51:54 mulo kernel: Bluetooth: hci0: Device revision is 2
lug 10 17:51:54 mulo kernel: Bluetooth: hci0: Secure boot is enabled
lug 10 17:51:54 mulo kernel: Bluetooth: hci0: OTP lock is enabled
lug 10 17:51:54 mulo kernel: Bluetooth: hci0: API lock is enabled
lug 10 17:51:54 mulo kernel: Bluetooth: hci0: Debug lock is disabled
lug 10 17:51:54 mulo kernel: Bluetooth: hci0: Minimum firmware build 1 week 10 2014
lug 10 17:51:54 mulo kernel: Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
lug 10 17:51:54 mulo kernel: Bluetooth: hci0: Boot Address: 0x40800
lug 10 17:51:54 mulo kernel: Bluetooth: hci0: Firmware Version: 201-12.24
lug 10 17:51:54 mulo kernel: i915 0000:00:02.0: [drm] Unknown revision 0x06
lug 10 17:51:54 mulo kernel: i915 0000:00:02.0: [drm] Found GEMINILAKE (device ID 3184) display version 10.00 stepping **
lug 10 17:51:54 mulo kernel: i915 0000:00:02.0: [drm] Unknown revid 0x06
lug 10 17:51:54 mulo kernel: Console: switching to colour dummy device 80x25
lug 10 17:51:55 mulo kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
lug 10 17:51:55 mulo kernel: i915 0000:00:02.0: [drm] couldn't get memory information
lug 10 17:51:55 mulo kernel: i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
lug 10 17:51:55 mulo kernel: i915 0000:00:02.0: [drm] Applying Increase DDI Disabled quirk
lug 10 17:51:55 mulo kernel: i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
lug 10 17:51:55 mulo kernel: mei_hdcp 0000:00:0f.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
lug 10 17:51:55 mulo kernel: iwlwifi 0000:00:0c.0: base HW address: 6c:94:66:56:44:a1, OTP minor version: 0x4
lug 10 17:51:55 mulo kernel: [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1
lug 10 17:51:55 mulo kernel: ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
lug 10 17:51:55 mulo kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
lug 10 17:51:55 mulo kernel: snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
lug 10 17:51:55 mulo kernel: i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
lug 10 17:51:55 mulo kernel: intel_telemetry_core Init
lug 10 17:51:55 mulo kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
lug 10 17:51:55 mulo kernel: iwlwifi 0000:00:0c.0 wlo2: renamed from wlan0
lug 10 17:51:55 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
lug 10 17:51:55 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
lug 10 17:51:55 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
lug 10 17:51:55 mulo kernel: Invalid pltconfig, ensure IPC1 device is enabled in BIOS
lug 10 17:51:55 mulo kernel: i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
lug 10 17:51:55 mulo kernel: intel_rapl_common: Found RAPL domain package
lug 10 17:51:55 mulo kernel: intel_rapl_common: Found RAPL domain core
lug 10 17:51:55 mulo kernel: intel_rapl_common: Found RAPL domain uncore
lug 10 17:51:55 mulo kernel: intel_rapl_common: Found RAPL domain dram
lug 10 17:51:55 mulo kernel: EXT4-fs (dm-2): warning: mounting fs with errors, running e2fsck is recommended
lug 10 17:51:55 mulo kernel: EXT4-fs (dm-2): recovery complete
lug 10 17:51:55 mulo kernel: EXT4-fs (dm-2): mounted filesystem d405b74f-f22e-4973-86de-a17460f2b1af r/w with ordered data mode. Quota mode: none.
lug 10 17:51:55 mulo kernel: Bluetooth: hci0: Waiting for firmware download to complete
lug 10 17:51:55 mulo kernel: Bluetooth: hci0: Firmware loaded in 1368096 usecs
lug 10 17:51:55 mulo kernel: Bluetooth: hci0: Waiting for device to boot
lug 10 17:51:55 mulo kernel: Bluetooth: hci0: Device booted in 13674 usecs
lug 10 17:51:55 mulo kernel: Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
lug 10 17:51:55 mulo kernel: Bluetooth: hci0: Applying Intel DDC parameters completed
lug 10 17:51:55 mulo kernel: Bluetooth: hci0: Firmware revision 0.1 build 201 week 12 2024
lug 10 17:51:55 mulo kernel: Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
lug 10 17:51:56 mulo kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
lug 10 17:51:56 mulo kernel: Bluetooth: BNEP filters: protocol multicast
lug 10 17:51:56 mulo kernel: Bluetooth: BNEP socket layer initialized
lug 10 17:51:56 mulo kernel: Bluetooth: MGMT ver 1.23
lug 10 17:51:56 mulo kernel: NET: Registered PF_ALG protocol family
lug 10 17:51:56 mulo kernel: Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
lug 10 17:51:56 mulo kernel: EXT4-fs (dm-3): recovery complete
lug 10 17:51:56 mulo kernel: EXT4-fs (dm-3): mounted filesystem 245c388e-dec5-4ba7-adf9-c4da95835a16 r/w with ordered data mode. Quota mode: none.
lug 10 17:51:56 mulo kernel: r8169 0000:02:00.0 eno1: Link is Down
lug 10 17:51:56 mulo kernel: EXT4-fs (dm-4): recovery complete
lug 10 17:51:56 mulo kernel: EXT4-fs (dm-4): mounted filesystem 9f40d3cb-e5ce-4877-bf27-e57d966cd4a4 r/w with ordered data mode. Quota mode: none.
lug 10 17:51:56 mulo kernel: iwlwifi 0000:00:0c.0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
lug 10 17:51:56 mulo kernel: iwlwifi 0000:00:0c.0: Registered PHC clock: iwlwifi-PTP, with index: 0
lug 10 17:51:57 mulo kernel: iwlwifi 0000:00:0c.0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
lug 10 17:51:57 mulo kernel: EXT4-fs (dm-5): recovery complete
lug 10 17:51:57 mulo kernel: EXT4-fs (dm-5): mounted filesystem e10ab897-b1af-45c8-bb93-9a85d0561900 r/w with ordered data mode. Quota mode: none.
lug 10 17:51:57 mulo systemd-journald[388]: File /var/log/journal/e591095cf0554dfca6c4c75cb8dbfcd0/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
lug 10 17:51:59 mulo kernel: Bluetooth: RFCOMM TTY layer initialized
lug 10 17:51:59 mulo kernel: Bluetooth: RFCOMM socket layer initialized
lug 10 17:51:59 mulo kernel: Bluetooth: RFCOMM ver 1.11
lug 10 17:51:59 mulo kernel: r8169 0000:02:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
lug 10 17:52:01 mulo kernel: wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
lug 10 17:52:01 mulo kernel: wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
lug 10 17:53:04 mulo kernel: warning: `qbittorrent' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
lug 10 17:53:12 mulo kernel: usb 2-1: USB disconnect, device number 2
lug 10 17:53:12 mulo kernel: sd 2:0:0:0: [sde] Synchronizing SCSI cache
lug 10 17:53:12 mulo kernel: sd 2:0:0:0: [sde] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
lug 10 17:53:12 mulo kernel: EXT4-fs (dm-4): unmounting filesystem 9f40d3cb-e5ce-4877-bf27-e57d966cd4a4.
lug 10 17:53:12 mulo kernel: Buffer I/O error on dev dm-4, logical block 0, lost sync page write
lug 10 17:53:12 mulo kernel: EXT4-fs (dm-4): I/O error while writing superblock
lug 10 17:53:12 mulo kernel: usb 2-1: new SuperSpeed USB device number 7 using xhci_hcd
lug 10 17:53:12 mulo kernel: usb 2-1: New USB device found, idVendor=152d, idProduct=0576, bcdDevice=41.01
lug 10 17:53:12 mulo kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
lug 10 17:53:12 mulo kernel: usb 2-1: Product: ANKEJE USB3.0
lug 10 17:53:12 mulo kernel: usb 2-1: Manufacturer: ANKEJE USB3.0
lug 10 17:53:12 mulo kernel: usb 2-1: SerialNumber: DD56419883014
lug 10 17:53:12 mulo kernel: usb 2-1: UAS is ignored for this device, using usb-storage instead
lug 10 17:53:12 mulo kernel: usb-storage 2-1:1.0: USB Mass Storage device detected
lug 10 17:53:12 mulo kernel: usb-storage 2-1:1.0: Quirks match for vid 152d pid 0576: 800000
lug 10 17:53:12 mulo kernel: scsi host2: usb-storage 2-1:1.0
lug 10 17:53:13 mulo kernel: scsi 2:0:0:0: Direct-Access     ANKEJE   USB3.0           4101 PQ: 0 ANSI: 6
lug 10 17:53:13 mulo kernel: sd 2:0:0:0: [sde] 500118192 512-byte logical blocks: (256 GB/238 GiB)
lug 10 17:53:13 mulo kernel: sd 2:0:0:0: [sde] Write Protect is off
lug 10 17:53:13 mulo kernel: sd 2:0:0:0: [sde] Mode Sense: 47 00 00 08
lug 10 17:53:13 mulo kernel: sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 10 17:53:14 mulo kernel:  sde: sde1
lug 10 17:53:14 mulo kernel: sd 2:0:0:0: [sde] Attached SCSI disk

then I created a file

sudo vim /etc/modprobe.d/usb-storage-quirks.conf

with inside all external disks

options usb-storage quirks=174c:55aa:u,1058:1230:u,152d:0576:u,0bda:0411:u

lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:5411 Realtek Semiconductor Corp. RTS5411 Hub
Bus 001 Device 003: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP)
Bus 001 Device 004: ID 1997:2433 Shenzhen Riitek Technology Co., Ltd wireless mini keyboard with touchpad
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 0bda:0411 Realtek Semiconductor Corp. Hub
Bus 002 Device 004: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Bus 002 Device 005: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Bus 002 Device 006: ID 1058:1230 Western Digital Technologies, Inc. My Book (WDBFJK)
Bus 002 Device 007: ID 152d:0576 JMicron Technology Corp. / JMicron USA Technology Corp. Gen1 SATA 6Gb/s Bridge

then mkinitcpio -P and rebooted, I checked that all disks are loaded with usb_storage

lsusb -t

➜  Scrivania lsusb -t

/:  Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/9p, 480M
    |__ Port 002: Dev 002, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 001: Dev 004, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 001: Dev 004, If 1, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 009: Dev 003, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 009: Dev 003, If 1, Class=Wireless, Driver=btusb, 12M
/:  Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/7p, 5000M
    |__ Port 001: Dev 002, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
    |__ Port 002: Dev 003, If 0, Class=Hub, Driver=hub/4p, 5000M
        |__ Port 002: Dev 005, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
    |__ Port 003: Dev 007, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
    |__ Port 004: Dev 008, If 0, Class=Mass Storage, Driver=usb-storage, 5000M

they are
- Port 001: Dev 002
- Port 002: Dev 005
- Port 003: Dev 007
- Port 004: Dev 008
they are all loaded with usb-storage but the problem is still present

Log: journalctl -k -b

lug 10 18:35:32 mulo kernel: Linux version 6.12.36-1-lts (linux-lts@archlinux) (gcc (GCC) 15.1.1 20250425, GNU ld (GNU Binutils) 2.44.0) #1 SMP PREEMPT_DYNAMIC Sun, 06 Jul 2025 12:59:22 +0000
lug 10 18:35:32 mulo kernel: Command line: BOOT_IMAGE=/vmlinuz-linux-lts root=/dev/mapper/volgroup_0-lv_root rw cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm root=/dev/volgroup_0/lv_root loglevel=3 quiet
lug 10 18:35:32 mulo kernel: BIOS-provided physical RAM map:
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x0000000000040000-0x0000000000058fff] usable
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x0000000000059000-0x0000000000059fff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x000000000005a000-0x000000000009dfff] usable
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x0000000012151000-0x00000000773d8fff] usable
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x00000000773d9000-0x0000000079c9dfff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x0000000079c9e000-0x0000000079cc1fff] ACPI data
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x0000000079cc2000-0x0000000079d21fff] ACPI NVS
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x0000000079d22000-0x000000007a0b6fff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x000000007a0b7000-0x000000007a170fff] type 20
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x000000007a171000-0x000000007a564fff] usable
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x000000007a565000-0x000000007a610fff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x000000007a611000-0x000000007abfffff] usable
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x000000007ac00000-0x000000007fffffff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
lug 10 18:35:32 mulo kernel: BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
lug 10 18:35:32 mulo kernel: NX (Execute Disable) protection: active
lug 10 18:35:32 mulo kernel: APIC: Static calls initialized
lug 10 18:35:32 mulo kernel: efi: EFI v2.7 by American Megatrends
lug 10 18:35:32 mulo kernel: efi: ACPI 2.0=0x79cae000 ACPI=0x79cae000 SMBIOS=0x79f6f000 SMBIOS 3.0=0x79f6e000 MEMATTR=0x72de3018 ESRT=0x79f4af18 
lug 10 18:35:32 mulo kernel: efi: Remove mem50: MMIO range=[0xd0000000-0xd0ffffff] (16MB) from e820 map
lug 10 18:35:32 mulo kernel: e820: remove [mem 0xd0000000-0xd0ffffff] reserved
lug 10 18:35:32 mulo kernel: efi: Not removing mem51: MMIO range=[0xd3709000-0xd3709fff] (4KB) from e820 map
lug 10 18:35:32 mulo kernel: efi: Remove mem52: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
lug 10 18:35:32 mulo kernel: e820: remove [mem 0xe0000000-0xefffffff] reserved
lug 10 18:35:32 mulo kernel: efi: Not removing mem53: MMIO range=[0xfe042000-0xfe042fff] (4KB) from e820 map
lug 10 18:35:32 mulo kernel: efi: Not removing mem54: MMIO range=[0xfe043000-0xfe043fff] (4KB) from e820 map
lug 10 18:35:32 mulo kernel: efi: Not removing mem55: MMIO range=[0xfe044000-0xfe044fff] (4KB) from e820 map
lug 10 18:35:32 mulo kernel: efi: Not removing mem56: MMIO range=[0xfe900000-0xfe902fff] (12KB) from e820 map
lug 10 18:35:32 mulo kernel: efi: Not removing mem57: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
lug 10 18:35:32 mulo kernel: efi: Not removing mem58: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map
lug 10 18:35:32 mulo kernel: efi: Not removing mem59: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
lug 10 18:35:32 mulo kernel: efi: Remove mem60: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
lug 10 18:35:32 mulo kernel: e820: remove [mem 0xff000000-0xffffffff] reserved
lug 10 18:35:32 mulo kernel: SMBIOS 3.2.0 present.
lug 10 18:35:32 mulo kernel: DMI: Intel(R) Client Systems NUC7PJYHN/NUC7JYB, BIOS JYGLKCPX.86A.0065.2021.0722.1137 07/22/2021
lug 10 18:35:32 mulo kernel: DMI: Memory slots populated: 2/2
lug 10 18:35:32 mulo kernel: tsc: Detected 1996.800 MHz processor
lug 10 18:35:32 mulo kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
lug 10 18:35:32 mulo kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
lug 10 18:35:32 mulo kernel: last_pfn = 0x280000 max_arch_pfn = 0x400000000
lug 10 18:35:32 mulo kernel: MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs
lug 10 18:35:32 mulo kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
lug 10 18:35:32 mulo kernel: last_pfn = 0x7ac00 max_arch_pfn = 0x400000000
lug 10 18:35:32 mulo kernel: esrt: Reserving ESRT space from 0x0000000079f4af18 to 0x0000000079f4af50.
lug 10 18:35:32 mulo kernel: Using GB pages for direct mapping
lug 10 18:35:32 mulo kernel: Secure boot disabled
lug 10 18:35:32 mulo kernel: RAMDISK: [mem 0x34209000-0x360fbfff]
lug 10 18:35:32 mulo kernel: ACPI: Early table checksum verification disabled
lug 10 18:35:32 mulo kernel: ACPI: RSDP 0x0000000079CAE000 000024 (v02 INTEL )
lug 10 18:35:32 mulo kernel: ACPI: XSDT 0x0000000079CAE0B0 0000D4 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 10 18:35:32 mulo kernel: ACPI: FACP 0x0000000079CBB630 000114 (v06 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 10 18:35:32 mulo kernel: ACPI: DSDT 0x0000000079CAE230 00D3FB (v02 INTEL  NUC7CJYB 01072009 INTL 20160930)
lug 10 18:35:32 mulo kernel: ACPI: FACS 0x0000000079D21080 000040
lug 10 18:35:32 mulo kernel: ACPI: FPDT 0x0000000079CBB750 000044 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 10 18:35:32 mulo kernel: ACPI: FIDT 0x0000000079CBB7A0 00009C (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 10 18:35:32 mulo kernel: ACPI: MCFG 0x0000000079CBB840 00003C (v01 INTEL  NUC7CJYB 01072009 MSFT 00000097)
lug 10 18:35:32 mulo kernel: ACPI: DBG2 0x0000000079CBB880 000072 (v00 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 18:35:32 mulo kernel: ACPI: DBGP 0x0000000079CBB900 000034 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 18:35:32 mulo kernel: ACPI: HPET 0x0000000079CBB940 000038 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 18:35:32 mulo kernel: ACPI: LPIT 0x0000000079CBB980 00005C (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 18:35:32 mulo kernel: ACPI: APIC 0x0000000079CBB9E0 000084 (v04 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 18:35:32 mulo kernel: ACPI: NPKT 0x0000000079CBBA70 000065 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 18:35:32 mulo kernel: ACPI: SSDT 0x0000000079CBBAE0 0010B3 (v02 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 18:35:32 mulo kernel: ACPI: SSDT 0x0000000079CBCBA0 0009FF (v01 INTEL  NUC7CJYB 00001000 INTL 20160930)
lug 10 18:35:32 mulo kernel: ACPI: SSDT 0x0000000079CBD5A0 0000B1 (v01 INTEL  NUC7CJYB 00001000 INTL 20160930)
lug 10 18:35:32 mulo kernel: ACPI: SSDT 0x0000000079CBD660 000661 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 10 18:35:32 mulo kernel: ACPI: SSDT 0x0000000079CBDCD0 000775 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 10 18:35:32 mulo kernel: ACPI: SSDT 0x0000000079CBE450 00035F (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 10 18:35:32 mulo kernel: ACPI: SSDT 0x0000000079CBE7B0 0001E6 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 10 18:35:32 mulo kernel: ACPI: SSDT 0x0000000079CBE9A0 00286F (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 10 18:35:32 mulo kernel: ACPI: BGRT 0x0000000079CC1210 000038 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 10 18:35:32 mulo kernel: ACPI: DMAR 0x0000000079CC1250 0000A8 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 10 18:35:32 mulo kernel: ACPI: WDAT 0x0000000079CC1300 000104 (v01 INTEL  NUC7CJYB 00000000      00000000)
lug 10 18:35:32 mulo kernel: ACPI: WSMT 0x0000000079CC1410 000028 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 10 18:35:32 mulo kernel: ACPI: Reserving FACP table memory at [mem 0x79cbb630-0x79cbb743]
lug 10 18:35:32 mulo kernel: ACPI: Reserving DSDT table memory at [mem 0x79cae230-0x79cbb62a]
lug 10 18:35:32 mulo kernel: ACPI: Reserving FACS table memory at [mem 0x79d21080-0x79d210bf]
lug 10 18:35:32 mulo kernel: ACPI: Reserving FPDT table memory at [mem 0x79cbb750-0x79cbb793]
lug 10 18:35:32 mulo kernel: ACPI: Reserving FIDT table memory at [mem 0x79cbb7a0-0x79cbb83b]
lug 10 18:35:32 mulo kernel: ACPI: Reserving MCFG table memory at [mem 0x79cbb840-0x79cbb87b]
lug 10 18:35:32 mulo kernel: ACPI: Reserving DBG2 table memory at [mem 0x79cbb880-0x79cbb8f1]
lug 10 18:35:32 mulo kernel: ACPI: Reserving DBGP table memory at [mem 0x79cbb900-0x79cbb933]
lug 10 18:35:32 mulo kernel: ACPI: Reserving HPET table memory at [mem 0x79cbb940-0x79cbb977]
lug 10 18:35:32 mulo kernel: ACPI: Reserving LPIT table memory at [mem 0x79cbb980-0x79cbb9db]
lug 10 18:35:32 mulo kernel: ACPI: Reserving APIC table memory at [mem 0x79cbb9e0-0x79cbba63]
lug 10 18:35:32 mulo kernel: ACPI: Reserving NPKT table memory at [mem 0x79cbba70-0x79cbbad4]
lug 10 18:35:32 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbbae0-0x79cbcb92]
lug 10 18:35:32 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbcba0-0x79cbd59e]
lug 10 18:35:32 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbd5a0-0x79cbd650]
lug 10 18:35:32 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbd660-0x79cbdcc0]
lug 10 18:35:32 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbdcd0-0x79cbe444]
lug 10 18:35:32 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe450-0x79cbe7ae]
lug 10 18:35:32 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe7b0-0x79cbe995]
lug 10 18:35:32 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe9a0-0x79cc120e]
lug 10 18:35:32 mulo kernel: ACPI: Reserving BGRT table memory at [mem 0x79cc1210-0x79cc1247]
lug 10 18:35:32 mulo kernel: ACPI: Reserving DMAR table memory at [mem 0x79cc1250-0x79cc12f7]
lug 10 18:35:32 mulo kernel: ACPI: Reserving WDAT table memory at [mem 0x79cc1300-0x79cc1403]
lug 10 18:35:32 mulo kernel: ACPI: Reserving WSMT table memory at [mem 0x79cc1410-0x79cc1437]
lug 10 18:35:32 mulo kernel: No NUMA configuration found
lug 10 18:35:32 mulo kernel: Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
lug 10 18:35:32 mulo kernel: NODE_DATA(0) allocated [mem 0x27ffd22c0-0x27fffcfff]
lug 10 18:35:32 mulo kernel: Zone ranges:
lug 10 18:35:32 mulo kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
lug 10 18:35:32 mulo kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
lug 10 18:35:32 mulo kernel:   Normal   [mem 0x0000000100000000-0x000000027fffffff]
lug 10 18:35:32 mulo kernel:   Device   empty
lug 10 18:35:32 mulo kernel: Movable zone start for each node
lug 10 18:35:32 mulo kernel: Early memory node ranges
lug 10 18:35:32 mulo kernel:   node   0: [mem 0x0000000000001000-0x000000000003efff]
lug 10 18:35:32 mulo kernel:   node   0: [mem 0x0000000000040000-0x0000000000058fff]
lug 10 18:35:32 mulo kernel:   node   0: [mem 0x000000000005a000-0x000000000009dfff]
lug 10 18:35:32 mulo kernel:   node   0: [mem 0x0000000000100000-0x000000000fffffff]
lug 10 18:35:32 mulo kernel:   node   0: [mem 0x0000000012151000-0x00000000773d8fff]
lug 10 18:35:32 mulo kernel:   node   0: [mem 0x000000007a171000-0x000000007a564fff]
lug 10 18:35:32 mulo kernel:   node   0: [mem 0x000000007a611000-0x000000007abfffff]
lug 10 18:35:32 mulo kernel:   node   0: [mem 0x0000000100000000-0x000000027fffffff]
lug 10 18:35:32 mulo kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
lug 10 18:35:32 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 10 18:35:32 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 10 18:35:32 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 10 18:35:32 mulo kernel: On node 0, zone DMA: 98 pages in unavailable ranges
lug 10 18:35:32 mulo kernel: On node 0, zone DMA32: 8529 pages in unavailable ranges
lug 10 18:35:32 mulo kernel: On node 0, zone DMA32: 11672 pages in unavailable ranges
lug 10 18:35:32 mulo kernel: On node 0, zone DMA32: 172 pages in unavailable ranges
lug 10 18:35:32 mulo kernel: On node 0, zone Normal: 21504 pages in unavailable ranges
lug 10 18:35:32 mulo kernel: Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
lug 10 18:35:32 mulo kernel: ACPI: PM-Timer IO Port: 0x408
lug 10 18:35:32 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
lug 10 18:35:32 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
lug 10 18:35:32 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
lug 10 18:35:32 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
lug 10 18:35:32 mulo kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
lug 10 18:35:32 mulo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
lug 10 18:35:32 mulo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
lug 10 18:35:32 mulo kernel: ACPI: Using ACPI (MADT) for SMP configuration information
lug 10 18:35:32 mulo kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
lug 10 18:35:32 mulo kernel: e820: update [mem 0x73d75000-0x73e0efff] usable ==> reserved
lug 10 18:35:32 mulo kernel: TSC deadline timer available
lug 10 18:35:32 mulo kernel: CPU topo: Max. logical packages:   1
lug 10 18:35:32 mulo kernel: CPU topo: Max. logical dies:       1
lug 10 18:35:32 mulo kernel: CPU topo: Max. dies per package:   1
lug 10 18:35:32 mulo kernel: CPU topo: Max. threads per core:   1
lug 10 18:35:32 mulo kernel: CPU topo: Num. cores per package:     4
lug 10 18:35:32 mulo kernel: CPU topo: Num. threads per package:   4
lug 10 18:35:32 mulo kernel: CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
lug 10 18:35:32 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
lug 10 18:35:32 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
lug 10 18:35:32 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x00059000-0x00059fff]
lug 10 18:35:32 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
lug 10 18:35:32 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x10000000-0x12150fff]
lug 10 18:35:32 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x73d75000-0x73e0efff]
lug 10 18:35:32 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x773d9000-0x7a170fff]
lug 10 18:35:32 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x7a565000-0x7a610fff]
lug 10 18:35:32 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0xffffffff]
lug 10 18:35:32 mulo kernel: [mem 0x80000000-0xd3708fff] available for PCI devices
lug 10 18:35:32 mulo kernel: Booting paravirtualized kernel on bare hardware
lug 10 18:35:32 mulo kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
lug 10 18:35:32 mulo kernel: setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
lug 10 18:35:32 mulo kernel: percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u524288
lug 10 18:35:32 mulo kernel: pcpu-alloc: s237568 r8192 d28672 u524288 alloc=1*2097152
lug 10 18:35:32 mulo kernel: pcpu-alloc: [0] 0 1 2 3 
lug 10 18:35:32 mulo kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=/dev/mapper/volgroup_0-lv_root rw cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm root=/dev/volgroup_0/lv_root loglevel=3 quiet
lug 10 18:35:32 mulo kernel: Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux-lts cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm", will be passed to user space.
lug 10 18:35:32 mulo kernel: random: crng init done
lug 10 18:35:32 mulo kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
lug 10 18:35:32 mulo kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
lug 10 18:35:32 mulo kernel: Fallback order for Node 0: 0 
lug 10 18:35:32 mulo kernel: Built 1 zonelists, mobility grouping on.  Total pages: 2055174
lug 10 18:35:32 mulo kernel: Policy zone: Normal
lug 10 18:35:32 mulo kernel: mem auto-init: stack:all(zero), heap alloc:on, heap free:off
lug 10 18:35:32 mulo kernel: software IO TLB: area num 4.
lug 10 18:35:32 mulo kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
lug 10 18:35:32 mulo kernel: ftrace: allocating 51450 entries in 201 pages
lug 10 18:35:32 mulo kernel: ftrace: allocated 201 pages with 4 groups
lug 10 18:35:32 mulo kernel: Dynamic Preempt: voluntary
lug 10 18:35:32 mulo kernel: rcu: Preemptible hierarchical RCU implementation.
lug 10 18:35:32 mulo kernel: rcu:         RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
lug 10 18:35:32 mulo kernel: rcu:         RCU priority boosting: priority 1 delay 500 ms.
lug 10 18:35:32 mulo kernel:         Trampoline variant of Tasks RCU enabled.
lug 10 18:35:32 mulo kernel:         Rude variant of Tasks RCU enabled.
lug 10 18:35:32 mulo kernel:         Tracing variant of Tasks RCU enabled.
lug 10 18:35:32 mulo kernel: rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
lug 10 18:35:32 mulo kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
lug 10 18:35:32 mulo kernel: RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 10 18:35:32 mulo kernel: RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 10 18:35:32 mulo kernel: RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 10 18:35:32 mulo kernel: NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
lug 10 18:35:32 mulo kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention.
lug 10 18:35:32 mulo kernel: kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
lug 10 18:35:32 mulo kernel: Console: colour dummy device 80x25
lug 10 18:35:32 mulo kernel: printk: legacy console [tty0] enabled
lug 10 18:35:32 mulo kernel: ACPI: Core revision 20240827
lug 10 18:35:32 mulo kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
lug 10 18:35:32 mulo kernel: APIC: Switch to symmetric I/O mode setup
lug 10 18:35:32 mulo kernel: DMAR: Host address width 39
lug 10 18:35:32 mulo kernel: DMAR: DRHD base: 0x000000fed64000 flags: 0x0
lug 10 18:35:32 mulo kernel: DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
lug 10 18:35:32 mulo kernel: DMAR: DRHD base: 0x000000fed65000 flags: 0x1
lug 10 18:35:32 mulo kernel: DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
lug 10 18:35:32 mulo kernel: DMAR: RMRR base: 0x00000079c3c000 end: 0x00000079c5bfff
lug 10 18:35:32 mulo kernel: DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
lug 10 18:35:32 mulo kernel: DMAR-IR: IOAPIC id 1 under DRHD base  0xfed65000 IOMMU 1
lug 10 18:35:32 mulo kernel: DMAR-IR: HPET id 0 under DRHD base 0xfed65000
lug 10 18:35:32 mulo kernel: DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
lug 10 18:35:32 mulo kernel: DMAR-IR: Enabled IRQ remapping in x2apic mode
lug 10 18:35:32 mulo kernel: x2apic enabled
lug 10 18:35:32 mulo kernel: APIC: Switched APIC routing to: cluster x2apic
lug 10 18:35:32 mulo kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
lug 10 18:35:32 mulo kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
lug 10 18:35:32 mulo kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3995.00 BogoMIPS (lpj=6656000)
lug 10 18:35:32 mulo kernel: x86/cpu: SGX disabled or unsupported by BIOS.
lug 10 18:35:32 mulo kernel: CPU0: Thermal monitoring enabled (TM1)
lug 10 18:35:32 mulo kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated
lug 10 18:35:32 mulo kernel: Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
lug 10 18:35:32 mulo kernel: Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
lug 10 18:35:32 mulo kernel: process: using mwait in idle threads
lug 10 18:35:32 mulo kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
lug 10 18:35:32 mulo kernel: Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit
lug 10 18:35:32 mulo kernel: Spectre V2 : Mitigation: Enhanced / Automatic IBRS
lug 10 18:35:32 mulo kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
lug 10 18:35:32 mulo kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
lug 10 18:35:32 mulo kernel: Register File Data Sampling: Mitigation: Clear Register File
lug 10 18:35:32 mulo kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
lug 10 18:35:32 mulo kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
lug 10 18:35:32 mulo kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
lug 10 18:35:32 mulo kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
lug 10 18:35:32 mulo kernel: x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
lug 10 18:35:32 mulo kernel: x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
lug 10 18:35:32 mulo kernel: x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
lug 10 18:35:32 mulo kernel: Freeing SMP alternatives memory: 40K
lug 10 18:35:32 mulo kernel: pid_max: default: 32768 minimum: 301
lug 10 18:35:32 mulo kernel: LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
lug 10 18:35:32 mulo kernel: landlock: Up and running.
lug 10 18:35:32 mulo kernel: Yama: becoming mindful.
lug 10 18:35:32 mulo kernel: LSM support for eBPF active
lug 10 18:35:32 mulo kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
lug 10 18:35:32 mulo kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
lug 10 18:35:32 mulo kernel: smpboot: CPU0: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz (family: 0x6, model: 0x7a, stepping: 0x8)
lug 10 18:35:32 mulo kernel: Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
lug 10 18:35:32 mulo kernel: ... version:                4
lug 10 18:35:32 mulo kernel: ... bit width:              48
lug 10 18:35:32 mulo kernel: ... generic registers:      4
lug 10 18:35:32 mulo kernel: ... value mask:             0000ffffffffffff
lug 10 18:35:32 mulo kernel: ... max period:             00007fffffffffff
lug 10 18:35:32 mulo kernel: ... fixed-purpose events:   3
lug 10 18:35:32 mulo kernel: ... event mask:             000000070000000f
lug 10 18:35:32 mulo kernel: signal: max sigframe size: 2032
lug 10 18:35:32 mulo kernel: Estimated ratio of average max frequency by base frequency (times 1024): 1638
lug 10 18:35:32 mulo kernel: rcu: Hierarchical SRCU implementation.
lug 10 18:35:32 mulo kernel: rcu:         Max phase no-delay instances is 1000.
lug 10 18:35:32 mulo kernel: Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
lug 10 18:35:32 mulo kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
lug 10 18:35:32 mulo kernel: smp: Bringing up secondary CPUs ...
lug 10 18:35:32 mulo kernel: smpboot: x86: Booting SMP configuration:
lug 10 18:35:32 mulo kernel: .... node  #0, CPUs:      #1 #2 #3
lug 10 18:35:32 mulo kernel: smp: Brought up 1 node, 4 CPUs
lug 10 18:35:32 mulo kernel: smpboot: Total of 4 processors activated (15980.00 BogoMIPS)
lug 10 18:35:32 mulo kernel: Memory: 7910980K/8220696K available (18432K kernel code, 2673K rwdata, 14352K rodata, 4288K init, 4272K bss, 297504K reserved, 0K cma-reserved)
lug 10 18:35:32 mulo kernel: devtmpfs: initialized
lug 10 18:35:32 mulo kernel: x86/mm: Memory block size: 128MB
lug 10 18:35:32 mulo kernel: ACPI: PM: Registering ACPI NVS region [mem 0x79cc2000-0x79d21fff] (393216 bytes)
lug 10 18:35:32 mulo kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
lug 10 18:35:32 mulo kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
lug 10 18:35:32 mulo kernel: pinctrl core: initialized pinctrl subsystem
lug 10 18:35:32 mulo kernel: PM: RTC time: 16:33:33, date: 2025-07-10
lug 10 18:35:32 mulo kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
lug 10 18:35:32 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
lug 10 18:35:32 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
lug 10 18:35:32 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
lug 10 18:35:32 mulo kernel: audit: initializing netlink subsys (disabled)
lug 10 18:35:32 mulo kernel: audit: type=2000 audit(1752165212.083:1): state=initialized audit_enabled=0 res=1
lug 10 18:35:32 mulo kernel: thermal_sys: Registered thermal governor 'fair_share'
lug 10 18:35:32 mulo kernel: thermal_sys: Registered thermal governor 'bang_bang'
lug 10 18:35:32 mulo kernel: thermal_sys: Registered thermal governor 'step_wise'
lug 10 18:35:32 mulo kernel: thermal_sys: Registered thermal governor 'user_space'
lug 10 18:35:32 mulo kernel: thermal_sys: Registered thermal governor 'power_allocator'
lug 10 18:35:32 mulo kernel: cpuidle: using governor ladder
lug 10 18:35:32 mulo kernel: cpuidle: using governor menu
lug 10 18:35:32 mulo kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
lug 10 18:35:32 mulo kernel: PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
lug 10 18:35:32 mulo kernel: PCI: Using configuration type 1 for base access
lug 10 18:35:32 mulo kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
lug 10 18:35:32 mulo kernel: HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
lug 10 18:35:32 mulo kernel: HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
lug 10 18:35:32 mulo kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
lug 10 18:35:32 mulo kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
lug 10 18:35:32 mulo kernel: ACPI: Added _OSI(Module Device)
lug 10 18:35:32 mulo kernel: ACPI: Added _OSI(Processor Device)
lug 10 18:35:32 mulo kernel: ACPI: Added _OSI(Processor Aggregator Device)
lug 10 18:35:32 mulo kernel: ACPI: 9 ACPI AML tables successfully acquired and loaded
lug 10 18:35:32 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 10 18:35:32 mulo kernel: ACPI: SSDT 0xFFFF8A1801524400 000190 (v02 PmRef  Cpu0Cst  00003001 INTL 20160930)
lug 10 18:35:32 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 10 18:35:32 mulo kernel: ACPI: SSDT 0xFFFF8A1801525E00 0001E6 (v02 PmRef  ApIst    00003000 INTL 20160930)
lug 10 18:35:32 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 10 18:35:32 mulo kernel: ACPI: SSDT 0xFFFF8A1800DC0800 0000C9 (v02 PmRef  ApCst    00003000 INTL 20160930)
lug 10 18:35:32 mulo kernel: ACPI: EC: EC started
lug 10 18:35:32 mulo kernel: ACPI: EC: interrupt blocked
lug 10 18:35:32 mulo kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
lug 10 18:35:32 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC used to handle transactions
lug 10 18:35:32 mulo kernel: ACPI: Interpreter enabled
lug 10 18:35:32 mulo kernel: ACPI: PM: (supports S0 S3 S4 S5)
lug 10 18:35:32 mulo kernel: ACPI: Using IOAPIC for interrupt routing
lug 10 18:35:32 mulo kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
lug 10 18:35:32 mulo kernel: PCI: Using E820 reservations for host bridge windows
lug 10 18:35:32 mulo kernel: ACPI: Enabled 1 GPEs in block 00 to 7F
lug 10 18:35:32 mulo kernel: ACPI: \_SB_.PCI0.RP01.PXSX.DRST: New power resource
lug 10 18:35:32 mulo kernel: ACPI: \_SB_.PCI0.RP02.PXSX.DRST: New power resource
lug 10 18:35:32 mulo kernel: ACPI: \_SB_.PCI0.RP03.PXSX.DRST: New power resource
lug 10 18:35:32 mulo kernel: ACPI: \_SB_.PCI0.RP04.PXSX.DRST: New power resource
lug 10 18:35:32 mulo kernel: ACPI: \_SB_.PCI0.RP05.PXSX.DRST: New power resource
lug 10 18:35:32 mulo kernel: ACPI: \_SB_.PCI0.RP06.PXSX.DRST: New power resource
lug 10 18:35:32 mulo kernel: ACPI: \_SB_.PCI0.CNVW.WRST: New power resource
lug 10 18:35:32 mulo kernel: ACPI: \_TZ_.FN00: New power resource
lug 10 18:35:32 mulo kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
lug 10 18:35:32 mulo kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
lug 10 18:35:32 mulo kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
lug 10 18:35:32 mulo kernel: PCI host bridge to bus 0000:00
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [mem 0x7c000001-0xcfffffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
lug 10 18:35:32 mulo kernel: pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000 conventional PCI endpoint
lug 10 18:35:32 mulo kernel: pci 0000:00:02.0: [8086:3184] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
lug 10 18:35:32 mulo kernel: pci 0000:00:02.0: BAR 0 [mem 0xa0000000-0xa0ffffff 64bit]
lug 10 18:35:32 mulo kernel: pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref]
lug 10 18:35:32 mulo kernel: pci 0000:00:02.0: BAR 4 [io  0xf000-0xf03f]
lug 10 18:35:32 mulo kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
lug 10 18:35:32 mulo kernel: pci 0000:00:0c.0: [8086:31dc] type 00 class 0x028000 PCIe Root Complex Integrated Endpoint
lug 10 18:35:32 mulo kernel: pci 0000:00:0c.0: BAR 0 [mem 0xa1314000-0xa1317fff 64bit]
lug 10 18:35:32 mulo kernel: pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
lug 10 18:35:32 mulo kernel: pci 0000:00:0e.0: [8086:3198] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
lug 10 18:35:32 mulo kernel: pci 0000:00:0e.0: BAR 0 [mem 0xa1310000-0xa1313fff 64bit]
lug 10 18:35:32 mulo kernel: pci 0000:00:0e.0: BAR 4 [mem 0xa1000000-0xa10fffff 64bit]
lug 10 18:35:32 mulo kernel: pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
lug 10 18:35:32 mulo kernel: pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000 conventional PCI endpoint
lug 10 18:35:32 mulo kernel: pci 0000:00:0f.0: BAR 0 [mem 0xa131f000-0xa131ffff 64bit]
lug 10 18:35:32 mulo kernel: pci 0000:00:0f.0: PME# supported from D3hot
lug 10 18:35:32 mulo kernel: pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601 conventional PCI endpoint
lug 10 18:35:32 mulo kernel: pci 0000:00:12.0: BAR 0 [mem 0xa1318000-0xa1319fff]
lug 10 18:35:32 mulo kernel: pci 0000:00:12.0: BAR 1 [mem 0xa131e000-0xa131e0ff]
lug 10 18:35:32 mulo kernel: pci 0000:00:12.0: BAR 2 [io  0xf090-0xf097]
lug 10 18:35:32 mulo kernel: pci 0000:00:12.0: BAR 3 [io  0xf080-0xf083]
lug 10 18:35:32 mulo kernel: pci 0000:00:12.0: BAR 4 [io  0xf060-0xf07f]
lug 10 18:35:32 mulo kernel: pci 0000:00:12.0: BAR 5 [mem 0xa131d000-0xa131d7ff]
lug 10 18:35:32 mulo kernel: pci 0000:00:12.0: PME# supported from D3hot
lug 10 18:35:32 mulo kernel: pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400 PCIe Root Port
lug 10 18:35:32 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 10 18:35:32 mulo kernel: pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
lug 10 18:35:32 mulo kernel: pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
lug 10 18:35:32 mulo kernel: pci 0000:00:13.2: [8086:31da] type 01 class 0x060400 PCIe Root Port
lug 10 18:35:32 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 10 18:35:32 mulo kernel: pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
lug 10 18:35:32 mulo kernel: pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
lug 10 18:35:32 mulo kernel: pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
lug 10 18:35:32 mulo kernel: pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330 conventional PCI endpoint
lug 10 18:35:32 mulo kernel: pci 0000:00:15.0: BAR 0 [mem 0xa1300000-0xa130ffff 64bit]
lug 10 18:35:32 mulo kernel: pci 0000:00:15.0: PME# supported from D3hot D3cold
lug 10 18:35:32 mulo kernel: pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501 conventional PCI endpoint
lug 10 18:35:32 mulo kernel: pci 0000:00:1c.0: BAR 0 [mem 0xa131c000-0xa131cfff 64bit]
lug 10 18:35:32 mulo kernel: pci 0000:00:1c.0: BAR 2 [mem 0xa131b000-0xa131bfff 64bit]
lug 10 18:35:32 mulo kernel: pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100 conventional PCI endpoint
lug 10 18:35:32 mulo kernel: pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500 conventional PCI endpoint
lug 10 18:35:32 mulo kernel: pci 0000:00:1f.1: BAR 0 [mem 0xa131a000-0xa131a0ff 64bit]
lug 10 18:35:32 mulo kernel: pci 0000:00:1f.1: BAR 4 [io  0xf040-0xf05f]
lug 10 18:35:32 mulo kernel: pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000 PCIe Endpoint
lug 10 18:35:32 mulo kernel: pci 0000:01:00.0: BAR 0 [mem 0xa1200000-0xa1200fff]
lug 10 18:35:32 mulo kernel: pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
lug 10 18:35:32 mulo kernel: pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
lug 10 18:35:32 mulo kernel: pci 0000:01:00.0: supports D1 D2
lug 10 18:35:32 mulo kernel: pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
lug 10 18:35:32 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 10 18:35:32 mulo kernel: pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
lug 10 18:35:32 mulo kernel: pci 0000:02:00.0: BAR 0 [io  0xe000-0xe0ff]
lug 10 18:35:32 mulo kernel: pci 0000:02:00.0: BAR 2 [mem 0xa1104000-0xa1104fff 64bit]
lug 10 18:35:32 mulo kernel: pci 0000:02:00.0: BAR 4 [mem 0xa1100000-0xa1103fff 64bit]
lug 10 18:35:32 mulo kernel: pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
lug 10 18:35:32 mulo kernel: pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128)
lug 10 18:35:32 mulo kernel: pci 0000:02:00.0: supports D1 D2
lug 10 18:35:32 mulo kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
lug 10 18:35:32 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 10 18:35:32 mulo kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 3
lug 10 18:35:32 mulo kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 4
lug 10 18:35:32 mulo kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 5
lug 10 18:35:32 mulo kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 6
lug 10 18:35:32 mulo kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 7
lug 10 18:35:32 mulo kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 9
lug 10 18:35:32 mulo kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 10
lug 10 18:35:32 mulo kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 11
lug 10 18:35:32 mulo kernel: ACPI: EC: interrupt unblocked
lug 10 18:35:32 mulo kernel: ACPI: EC: event unblocked
lug 10 18:35:32 mulo kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
lug 10 18:35:32 mulo kernel: ACPI: EC: GPE=0x22
lug 10 18:35:32 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC initialization complete
lug 10 18:35:32 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: EC: Used to handle transactions and events
lug 10 18:35:32 mulo kernel: iommu: Default domain type: Translated
lug 10 18:35:32 mulo kernel: iommu: DMA domain TLB invalidation policy: lazy mode
lug 10 18:35:32 mulo kernel: SCSI subsystem initialized
lug 10 18:35:32 mulo kernel: libata version 3.00 loaded.
lug 10 18:35:32 mulo kernel: ACPI: bus type USB registered
lug 10 18:35:32 mulo kernel: usbcore: registered new interface driver usbfs
lug 10 18:35:32 mulo kernel: usbcore: registered new interface driver hub
lug 10 18:35:32 mulo kernel: usbcore: registered new device driver usb
lug 10 18:35:32 mulo kernel: EDAC MC: Ver: 3.0.0
lug 10 18:35:32 mulo kernel: efivars: Registered efivars operations
lug 10 18:35:32 mulo kernel: NetLabel: Initializing
lug 10 18:35:32 mulo kernel: NetLabel:  domain hash size = 128
lug 10 18:35:32 mulo kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
lug 10 18:35:32 mulo kernel: NetLabel:  unlabeled traffic allowed by default
lug 10 18:35:32 mulo kernel: mctp: management component transport protocol core
lug 10 18:35:32 mulo kernel: NET: Registered PF_MCTP protocol family
lug 10 18:35:32 mulo kernel: PCI: Using ACPI for IRQ routing
lug 10 18:35:32 mulo kernel: PCI: pci_cache_line_size set to 64 bytes
lug 10 18:35:32 mulo kernel: resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00
lug 10 18:35:32 mulo kernel: e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
lug 10 18:35:32 mulo kernel: e820: reserve RAM buffer [mem 0x00059000-0x0005ffff]
lug 10 18:35:32 mulo kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
lug 10 18:35:32 mulo kernel: e820: reserve RAM buffer [mem 0x73d75000-0x73ffffff]
lug 10 18:35:32 mulo kernel: e820: reserve RAM buffer [mem 0x773d9000-0x77ffffff]
lug 10 18:35:32 mulo kernel: e820: reserve RAM buffer [mem 0x7a565000-0x7bffffff]
lug 10 18:35:32 mulo kernel: e820: reserve RAM buffer [mem 0x7ac00000-0x7bffffff]
lug 10 18:35:32 mulo kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device
lug 10 18:35:32 mulo kernel: pci 0000:00:02.0: vgaarb: bridge control possible
lug 10 18:35:32 mulo kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
lug 10 18:35:32 mulo kernel: vgaarb: loaded
lug 10 18:35:32 mulo kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
lug 10 18:35:32 mulo kernel: hpet0: 8 comparators, 64-bit 19.200000 MHz counter
lug 10 18:35:32 mulo kernel: clocksource: Switched to clocksource tsc-early
lug 10 18:35:32 mulo kernel: VFS: Disk quotas dquot_6.6.0
lug 10 18:35:32 mulo kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
lug 10 18:35:32 mulo kernel: pnp: PnP ACPI init
lug 10 18:35:32 mulo kernel: system 00:00: [io  0x0a00-0x0a1f] has been reserved
lug 10 18:35:32 mulo kernel: system 00:00: [io  0x0a20-0x0a2f] has been reserved
lug 10 18:35:32 mulo kernel: system 00:00: [io  0x0a30-0x0a3f] has been reserved
lug 10 18:35:32 mulo kernel: system 00:00: [io  0x0a40-0x0a4f] has been reserved
lug 10 18:35:32 mulo kernel: system 00:00: [io  0x0a50-0x0a5f] has been reserved
lug 10 18:35:32 mulo kernel: system 00:00: [io  0x0a60-0x0a6f] has been reserved
lug 10 18:35:32 mulo kernel: system 00:01: [io  0x0680-0x069f] has been reserved
lug 10 18:35:32 mulo kernel: system 00:01: [io  0x0400-0x047f] could not be reserved
lug 10 18:35:32 mulo kernel: system 00:01: [io  0x0500-0x05fe] has been reserved
lug 10 18:35:32 mulo kernel: system 00:01: [io  0x0600-0x061f] has been reserved
lug 10 18:35:32 mulo kernel: system 00:01: [io  0x164e-0x164f] has been reserved
lug 10 18:35:32 mulo kernel: system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
lug 10 18:35:32 mulo kernel: system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
lug 10 18:35:32 mulo kernel: system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
lug 10 18:35:32 mulo kernel: system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
lug 10 18:35:32 mulo kernel: system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
lug 10 18:35:32 mulo kernel: system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
lug 10 18:35:32 mulo kernel: system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
lug 10 18:35:32 mulo kernel: system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
lug 10 18:35:32 mulo kernel: system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
lug 10 18:35:32 mulo kernel: pnp: PnP ACPI: found 4 devices
lug 10 18:35:32 mulo kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
lug 10 18:35:32 mulo kernel: NET: Registered PF_INET protocol family
lug 10 18:35:32 mulo kernel: IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
lug 10 18:35:32 mulo kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
lug 10 18:35:32 mulo kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
lug 10 18:35:32 mulo kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
lug 10 18:35:32 mulo kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
lug 10 18:35:32 mulo kernel: TCP: Hash tables configured (established 65536 bind 65536)
lug 10 18:35:32 mulo kernel: MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
lug 10 18:35:32 mulo kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
lug 10 18:35:32 mulo kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
lug 10 18:35:32 mulo kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
lug 10 18:35:32 mulo kernel: NET: Registered PF_XDP protocol family
lug 10 18:35:32 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 10 18:35:32 mulo kernel: pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
lug 10 18:35:32 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 10 18:35:32 mulo kernel: pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
lug 10 18:35:32 mulo kernel: pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 9 [mem 0x7c000001-0xcfffffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 10 [mem 0xe0000000-0xefffffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 11 [mem 0xfea00000-0xfeafffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 12 [mem 0xfed00000-0xfed003ff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 13 [mem 0xfed01000-0xfed01fff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 14 [mem 0xfed03000-0xfed03fff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 15 [mem 0xfed06000-0xfed06fff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 16 [mem 0xfed08000-0xfed09fff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 17 [mem 0xfed80000-0xfedbffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 18 [mem 0xfed1c000-0xfed1cfff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:00: resource 19 [mem 0xfee00000-0xfeefffff window]
lug 10 18:35:32 mulo kernel: pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff]
lug 10 18:35:32 mulo kernel: pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
lug 10 18:35:32 mulo kernel: pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa11fffff]
lug 10 18:35:32 mulo kernel: PCI: CLS 64 bytes, default 64
lug 10 18:35:32 mulo kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
lug 10 18:35:32 mulo kernel: software IO TLB: mapped [mem 0x000000006ede3000-0x0000000072de3000] (64MB)
lug 10 18:35:32 mulo kernel: Trying to unpack rootfs image as initramfs...
lug 10 18:35:32 mulo kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
lug 10 18:35:32 mulo kernel: clocksource: Switched to clocksource tsc
lug 10 18:35:32 mulo kernel: Initialise system trusted keyrings
lug 10 18:35:32 mulo kernel: Key type blacklist registered
lug 10 18:35:32 mulo kernel: workingset: timestamp_bits=36 max_order=21 bucket_order=0
lug 10 18:35:32 mulo kernel: fuse: init (API version 7.41)
lug 10 18:35:32 mulo kernel: integrity: Platform Keyring initialized
lug 10 18:35:32 mulo kernel: integrity: Machine keyring initialized
lug 10 18:35:32 mulo kernel: Key type asymmetric registered
lug 10 18:35:32 mulo kernel: Asymmetric key parser 'x509' registered
lug 10 18:35:32 mulo kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
lug 10 18:35:32 mulo kernel: io scheduler mq-deadline registered
lug 10 18:35:32 mulo kernel: io scheduler kyber registered
lug 10 18:35:32 mulo kernel: io scheduler bfq registered
lug 10 18:35:32 mulo kernel: ledtrig-cpu: registered to indicate activity on CPUs
lug 10 18:35:32 mulo kernel: pcieport 0000:00:13.0: PME: Signaling with IRQ 120
lug 10 18:35:32 mulo kernel: pcieport 0000:00:13.2: PME: Signaling with IRQ 121
lug 10 18:35:32 mulo kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lug 10 18:35:32 mulo kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
lug 10 18:35:32 mulo kernel: ACPI: button: Power Button [PWRB]
lug 10 18:35:32 mulo kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
lug 10 18:35:32 mulo kernel: ACPI: button: Sleep Button [SLPB]
lug 10 18:35:32 mulo kernel: thermal LNXTHERM:00: registered as thermal_zone0
lug 10 18:35:32 mulo kernel: ACPI: thermal: Thermal Zone [TZ01] (50 C)
lug 10 18:35:32 mulo kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
lug 10 18:35:32 mulo kernel: Non-volatile memory driver v1.3
lug 10 18:35:32 mulo kernel: Linux agpgart interface v0.103
lug 10 18:35:32 mulo kernel: ACPI: bus type drm_connector registered
lug 10 18:35:32 mulo kernel: ahci 0000:00:12.0: version 3.0
lug 10 18:35:32 mulo kernel: ahci 0000:00:12.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
lug 10 18:35:32 mulo kernel: ahci 0000:00:12.0: 2/2 ports implemented (port mask 0x3)
lug 10 18:35:32 mulo kernel: ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst 
lug 10 18:35:32 mulo kernel: scsi host0: ahci
lug 10 18:35:32 mulo kernel: scsi host1: ahci
lug 10 18:35:32 mulo kernel: ata1: SATA max UDMA/133 abar m2048@0xa131d000 port 0xa131d100 irq 122 lpm-pol 3
lug 10 18:35:32 mulo kernel: ata2: SATA max UDMA/133 abar m2048@0xa131d000 port 0xa131d180 irq 122 lpm-pol 3
lug 10 18:35:32 mulo kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
lug 10 18:35:32 mulo kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
lug 10 18:35:32 mulo kernel: xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
lug 10 18:35:32 mulo kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
lug 10 18:35:32 mulo kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
lug 10 18:35:32 mulo kernel: xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
lug 10 18:35:32 mulo kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
lug 10 18:35:32 mulo kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
lug 10 18:35:32 mulo kernel: usb usb1: Product: xHCI Host Controller
lug 10 18:35:32 mulo kernel: usb usb1: Manufacturer: Linux 6.12.36-1-lts xhci-hcd
lug 10 18:35:32 mulo kernel: usb usb1: SerialNumber: 0000:00:15.0
lug 10 18:35:32 mulo kernel: hub 1-0:1.0: USB hub found
lug 10 18:35:32 mulo kernel: hub 1-0:1.0: 9 ports detected
lug 10 18:35:32 mulo kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
lug 10 18:35:32 mulo kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
lug 10 18:35:32 mulo kernel: usb usb2: Product: xHCI Host Controller
lug 10 18:35:32 mulo kernel: usb usb2: Manufacturer: Linux 6.12.36-1-lts xhci-hcd
lug 10 18:35:32 mulo kernel: usb usb2: SerialNumber: 0000:00:15.0
lug 10 18:35:32 mulo kernel: hub 2-0:1.0: USB hub found
lug 10 18:35:32 mulo kernel: hub 2-0:1.0: 7 ports detected
lug 10 18:35:32 mulo kernel: usbcore: registered new interface driver usbserial_generic
lug 10 18:35:32 mulo kernel: usbserial: USB Serial support registered for generic
lug 10 18:35:32 mulo kernel: rtc_cmos 00:03: RTC can wake from S4
lug 10 18:35:32 mulo kernel: rtc_cmos 00:03: registered as rtc0
lug 10 18:35:32 mulo kernel: rtc_cmos 00:03: setting system clock to 2025-07-10T16:33:33 UTC (1752165213)
lug 10 18:35:32 mulo kernel: rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
lug 10 18:35:32 mulo kernel: intel_pstate: Intel P-state driver initializing
lug 10 18:35:32 mulo kernel: simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
lug 10 18:35:32 mulo kernel: [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
lug 10 18:35:32 mulo kernel: fbcon: Deferring console take-over
lug 10 18:35:32 mulo kernel: simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
lug 10 18:35:32 mulo kernel: hid: raw HID events driver (C) Jiri Kosina
lug 10 18:35:32 mulo kernel: drop_monitor: Initializing network drop monitor service
lug 10 18:35:32 mulo kernel: NET: Registered PF_INET6 protocol family
lug 10 18:35:32 mulo kernel: Freeing initrd memory: 31692K
lug 10 18:35:32 mulo kernel: Segment Routing with IPv6
lug 10 18:35:32 mulo kernel: RPL Segment Routing with IPv6
lug 10 18:35:32 mulo kernel: In-situ OAM (IOAM) with IPv6
lug 10 18:35:32 mulo kernel: NET: Registered PF_PACKET protocol family
lug 10 18:35:32 mulo kernel: microcode: Current revision: 0x00000026
lug 10 18:35:32 mulo kernel: microcode: Updated early from: 0x0000001a
lug 10 18:35:32 mulo kernel: resctrl: L2 allocation detected
lug 10 18:35:32 mulo kernel: IPI shorthand broadcast: enabled
lug 10 18:35:32 mulo kernel: sched_clock: Marking stable (533336552, 4043932)->(539786151, -2405667)
lug 10 18:35:32 mulo kernel: registered taskstats version 1
lug 10 18:35:32 mulo kernel: Loading compiled-in X.509 certificates
lug 10 18:35:32 mulo kernel: Loaded X.509 cert 'Build time autogenerated kernel key: eee451ffdd9026577431c4c9a3bfa8216a157637'
lug 10 18:35:32 mulo kernel: zswap: loaded using pool zstd/zsmalloc
lug 10 18:35:32 mulo kernel: Demotion targets for Node 0: null
lug 10 18:35:32 mulo kernel: Key type .fscrypt registered
lug 10 18:35:32 mulo kernel: Key type fscrypt-provisioning registered
lug 10 18:35:32 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 10 18:35:32 mulo kernel: integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
lug 10 18:35:32 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 10 18:35:32 mulo kernel: integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
lug 10 18:35:32 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 10 18:35:32 mulo kernel: integrity: Loaded X.509 cert 'CISD FW Update - Certificate: 068268b4a41c93854262d49b4f788f13'
lug 10 18:35:32 mulo kernel: PM:   Magic number: 1:484:590
lug 10 18:35:32 mulo kernel: RAS: Correctable Errors collector initialized.
lug 10 18:35:32 mulo kernel: clk: Disabling unused clocks
lug 10 18:35:32 mulo kernel: PM: genpd: Disabling unused power domains
lug 10 18:35:32 mulo kernel: usb 1-2: new high-speed USB device number 2 using xhci_hcd
lug 10 18:35:32 mulo kernel: ata2: SATA link down (SStatus 4 SControl 300)
lug 10 18:35:32 mulo kernel: usb 1-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 0.03
lug 10 18:35:32 mulo kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 10 18:35:32 mulo kernel: usb 1-2: Product: USB2.1 Hub
lug 10 18:35:32 mulo kernel: usb 1-2: Manufacturer: Generic
lug 10 18:35:32 mulo kernel: hub 1-2:1.0: USB hub found
lug 10 18:35:32 mulo kernel: hub 1-2:1.0: 4 ports detected
lug 10 18:35:32 mulo kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
lug 10 18:35:32 mulo kernel: ata1.00: Model 'Samsung SSD 860 EVO 250GB', rev 'RVT01B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
lug 10 18:35:32 mulo kernel: ata1.00: supports DRM functions and may not be fully accessible
lug 10 18:35:32 mulo kernel: ata1.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
lug 10 18:35:32 mulo kernel: ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
lug 10 18:35:32 mulo kernel: ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
lug 10 18:35:32 mulo kernel: ata1.00: supports DRM functions and may not be fully accessible
lug 10 18:35:32 mulo kernel: ata1.00: configured for UDMA/133
lug 10 18:35:32 mulo kernel: ahci 0000:00:12.0: port does not support device sleep
lug 10 18:35:32 mulo kernel: scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
lug 10 18:35:32 mulo kernel: ata1.00: Enabling discard_zeroes_data
lug 10 18:35:32 mulo kernel: sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
lug 10 18:35:32 mulo kernel: sd 0:0:0:0: [sda] Write Protect is off
lug 10 18:35:32 mulo kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
lug 10 18:35:32 mulo kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 10 18:35:32 mulo kernel: sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
lug 10 18:35:32 mulo kernel: ata1.00: Enabling discard_zeroes_data
lug 10 18:35:32 mulo kernel: usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
lug 10 18:35:32 mulo kernel: usb 2-1: New USB device found, idVendor=152d, idProduct=0576, bcdDevice=41.01
lug 10 18:35:32 mulo kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
lug 10 18:35:32 mulo kernel: usb 2-1: Product: ANKEJE USB3.0
lug 10 18:35:32 mulo kernel: usb 2-1: Manufacturer: ANKEJE USB3.0
lug 10 18:35:32 mulo kernel: usb 2-1: SerialNumber: DD56419883014
lug 10 18:35:32 mulo kernel:  sda: sda1 sda2
lug 10 18:35:32 mulo kernel: sd 0:0:0:0: [sda] supports TCG Opal
lug 10 18:35:32 mulo kernel: sd 0:0:0:0: [sda] Attached SCSI disk
lug 10 18:35:32 mulo kernel: Freeing unused decrypted memory: 2028K
lug 10 18:35:32 mulo kernel: Freeing unused kernel image (initmem) memory: 4288K
lug 10 18:35:32 mulo kernel: Write protecting the kernel read-only data: 34816k
lug 10 18:35:32 mulo kernel: Freeing unused kernel image (rodata/data gap) memory: 2032K
lug 10 18:35:32 mulo kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
lug 10 18:35:32 mulo kernel: rodata_test: all tests were successful
lug 10 18:35:32 mulo kernel: Run /init as init process
lug 10 18:35:32 mulo kernel:   with arguments:
lug 10 18:35:32 mulo kernel:     /init
lug 10 18:35:32 mulo kernel:   with environment:
lug 10 18:35:32 mulo kernel:     HOME=/
lug 10 18:35:32 mulo kernel:     TERM=linux
lug 10 18:35:32 mulo kernel:     BOOT_IMAGE=/vmlinuz-linux-lts
lug 10 18:35:32 mulo kernel:     cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm
lug 10 18:35:32 mulo kernel: usb 1-9: new full-speed USB device number 3 using xhci_hcd
lug 10 18:35:32 mulo kernel: usb 1-9: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
lug 10 18:35:32 mulo kernel: usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
lug 10 18:35:32 mulo kernel: rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
lug 10 18:35:32 mulo kernel: cryptd: max_cpu_qlen set to 1000
lug 10 18:35:32 mulo kernel: sdhci: Secure Digital Host Controller Interface driver
lug 10 18:35:32 mulo kernel: sdhci: Copyright(c) Pierre Ossman
lug 10 18:35:32 mulo kernel: sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 6)
lug 10 18:35:32 mulo kernel: mmc0: CQHCI version 5.10
lug 10 18:35:32 mulo kernel: mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
lug 10 18:35:32 mulo kernel: usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
lug 10 18:35:32 mulo kernel: usb 2-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 0.03
lug 10 18:35:32 mulo kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 10 18:35:32 mulo kernel: usb 2-2: Product: USB3.2 Hub
lug 10 18:35:32 mulo kernel: usb 2-2: Manufacturer: Generic
lug 10 18:35:32 mulo kernel: hub 2-2:1.0: USB hub found
lug 10 18:35:32 mulo kernel: hub 2-2:1.0: 4 ports detected
lug 10 18:35:32 mulo kernel: usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
lug 10 18:35:32 mulo kernel: mmc0: Failed to initialize a non-removable card
lug 10 18:35:32 mulo kernel: usb 1-2.1: New USB device found, idVendor=1997, idProduct=2433, bcdDevice=20.12
lug 10 18:35:32 mulo kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 10 18:35:32 mulo kernel: usb 1-2.1: Product: Mini Keyboard
lug 10 18:35:32 mulo kernel: usb 1-2.1: Manufacturer:  
lug 10 18:35:32 mulo kernel: usbcore: registered new interface driver usbhid
lug 10 18:35:32 mulo kernel: usbhid: USB HID core driver
lug 10 18:35:32 mulo kernel: input:   Mini Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:1997:2433.0001/input/input2
lug 10 18:35:32 mulo kernel: usb 2-3: new SuperSpeed USB device number 4 using xhci_hcd
lug 10 18:35:32 mulo kernel: usb 2-3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 10 18:35:32 mulo kernel: usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 10 18:35:32 mulo kernel: usb 2-3: Product: Ugreen Storage Device
lug 10 18:35:32 mulo kernel: usb 2-3: Manufacturer: Ugreen
lug 10 18:35:32 mulo kernel: usb 2-3: SerialNumber: 022004019C85
lug 10 18:35:32 mulo kernel: hid-generic 0003:1997:2433.0001: input,hidraw0: USB HID v1.01 Keyboard [  Mini Keyboard] on usb-0000:00:15.0-2.1/input0
lug 10 18:35:32 mulo kernel: input:   Mini Keyboard Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input3
lug 10 18:35:32 mulo kernel: input:   Mini Keyboard System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input4
lug 10 18:35:32 mulo kernel: usb 2-2.2: new SuperSpeed USB device number 5 using xhci_hcd
lug 10 18:35:32 mulo kernel: usb 2-2.2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 10 18:35:32 mulo kernel: usb 2-2.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 10 18:35:32 mulo kernel: usb 2-2.2: Product: ASM105x
lug 10 18:35:32 mulo kernel: usb 2-2.2: Manufacturer: ASMT
lug 10 18:35:32 mulo kernel: usb 2-2.2: SerialNumber: 12345679818C
lug 10 18:35:32 mulo kernel: input:   Mini Keyboard Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input5
lug 10 18:35:32 mulo kernel: hid-generic 0003:1997:2433.0002: input,hidraw1: USB HID v1.01 Mouse [  Mini Keyboard] on usb-0000:00:15.0-2.1/input1
lug 10 18:35:32 mulo kernel: usb 2-4: new SuperSpeed USB device number 6 using xhci_hcd
lug 10 18:35:32 mulo kernel: usb 2-4: New USB device found, idVendor=1058, idProduct=1230, bcdDevice=10.50
lug 10 18:35:32 mulo kernel: usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 10 18:35:32 mulo kernel: usb 2-4: Product: My Book 1230
lug 10 18:35:32 mulo kernel: usb 2-4: Manufacturer: Western Digital
lug 10 18:35:32 mulo kernel: usb 2-4: SerialNumber: 574343344530393137333939
lug 10 18:35:32 mulo kernel: usb 2-1: UAS is ignored for this device, using usb-storage instead
lug 10 18:35:32 mulo kernel: usb-storage 2-1:1.0: USB Mass Storage device detected
lug 10 18:35:32 mulo kernel: usb-storage 2-1:1.0: Quirks match for vid 152d pid 0576: 800000
lug 10 18:35:32 mulo kernel: scsi host2: usb-storage 2-1:1.0
lug 10 18:35:32 mulo kernel: usb 2-3: UAS is ignored for this device, using usb-storage instead
lug 10 18:35:32 mulo kernel: usb-storage 2-3:1.0: USB Mass Storage device detected
lug 10 18:35:32 mulo kernel: usb-storage 2-3:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 10 18:35:32 mulo kernel: scsi host3: usb-storage 2-3:1.0
lug 10 18:35:32 mulo kernel: usb 2-2.2: UAS is ignored for this device, using usb-storage instead
lug 10 18:35:32 mulo kernel: usb-storage 2-2.2:1.0: USB Mass Storage device detected
lug 10 18:35:32 mulo kernel: usb-storage 2-2.2:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 10 18:35:32 mulo kernel: scsi host4: usb-storage 2-2.2:1.0
lug 10 18:35:32 mulo kernel: usb-storage 2-4:1.0: USB Mass Storage device detected
lug 10 18:35:32 mulo kernel: usb-storage 2-4:1.0: Quirks match for vid 1058 pid 1230: 800000
lug 10 18:35:32 mulo kernel: scsi host5: usb-storage 2-4:1.0
lug 10 18:35:32 mulo kernel: usbcore: registered new interface driver usb-storage
lug 10 18:35:32 mulo kernel: usbcore: registered new interface driver uas
lug 10 18:35:32 mulo kernel: device-mapper: uevent: version 1.0.3
lug 10 18:35:32 mulo kernel: device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
lug 10 18:35:32 mulo kernel: Key type encrypted registered
lug 10 18:35:32 mulo kernel: fbcon: Taking over console
lug 10 18:35:32 mulo kernel: Console: switching to colour frame buffer device 128x48
lug 10 18:35:32 mulo kernel: scsi 3:0:0:0: Direct-Access     TOSHIBA  MQ01ABD100       0    PQ: 0 ANSI: 6
lug 10 18:35:32 mulo kernel: scsi 2:0:0:0: Direct-Access     ANKEJE   USB3.0           4101 PQ: 0 ANSI: 6
lug 10 18:35:32 mulo kernel: scsi 4:0:0:0: Direct-Access     ASMT     ASM105x          0    PQ: 0 ANSI: 6
lug 10 18:35:32 mulo kernel: scsi 5:0:0:0: Direct-Access     WD       My Book 1230     1050 PQ: 0 ANSI: 6
lug 10 18:35:32 mulo kernel: scsi 5:0:0:1: Enclosure         WD       SES Device       1050 PQ: 0 ANSI: 6
lug 10 18:35:32 mulo kernel: sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 10 18:35:32 mulo kernel: sd 4:0:0:0: [sdb] 4096-byte physical blocks
lug 10 18:35:32 mulo kernel: sd 4:0:0:0: [sdb] Write Protect is off
lug 10 18:35:32 mulo kernel: sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
lug 10 18:35:32 mulo kernel: sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 10 18:35:32 mulo kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 10 18:35:32 mulo kernel: sd 3:0:0:0: [sdc] 4096-byte physical blocks
lug 10 18:35:32 mulo kernel: sd 3:0:0:0: [sdc] Write Protect is off
lug 10 18:35:32 mulo kernel: sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00
lug 10 18:35:32 mulo kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 10 18:35:32 mulo kernel: sd 5:0:0:0: [sdd] 976746240 4096-byte logical blocks: (4.00 TB/3.64 TiB)
lug 10 18:35:32 mulo kernel: sd 2:0:0:0: [sde] 500118192 512-byte logical blocks: (256 GB/238 GiB)
lug 10 18:35:32 mulo kernel: sd 5:0:0:0: [sdd] Write Protect is off
lug 10 18:35:32 mulo kernel: sd 5:0:0:0: [sdd] Mode Sense: 53 00 10 08
lug 10 18:35:32 mulo kernel: sd 2:0:0:0: [sde] Write Protect is off
lug 10 18:35:32 mulo kernel: sd 2:0:0:0: [sde] Mode Sense: 47 00 00 08
lug 10 18:35:32 mulo kernel: sd 5:0:0:0: [sdd] No Caching mode page found
lug 10 18:35:32 mulo kernel: sd 5:0:0:0: [sdd] Assuming drive cache: write through
lug 10 18:35:32 mulo kernel: sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 10 18:35:32 mulo kernel:  sdb: sdb1
lug 10 18:35:32 mulo kernel:  sdd: sdd1
lug 10 18:35:32 mulo kernel: sd 5:0:0:0: [sdd] Attached SCSI disk
lug 10 18:35:32 mulo kernel: sd 4:0:0:0: [sdb] Attached SCSI disk
lug 10 18:35:32 mulo kernel:  sde: sde1
lug 10 18:35:32 mulo kernel: sd 2:0:0:0: [sde] Attached SCSI disk
lug 10 18:35:32 mulo kernel:  sdc: sdc1
lug 10 18:35:32 mulo kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
lug 10 18:35:32 mulo kernel: scsi 5:0:0:1: Failed to get diagnostic page 0x1
lug 10 18:35:32 mulo kernel: scsi 5:0:0:1: Failed to bind enclosure -19
lug 10 18:35:32 mulo kernel: ses 5:0:0:1: Attached Enclosure device
lug 10 18:35:32 mulo kernel: EXT4-fs (dm-1): mounted filesystem 16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12 r/w with ordered data mode. Quota mode: none.
lug 10 18:35:32 mulo systemd[1]: systemd 257.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
lug 10 18:35:32 mulo systemd[1]: Detected architecture x86-64.
lug 10 18:35:32 mulo systemd[1]: Hostname set to <mulo>.
lug 10 18:35:32 mulo systemd[1]: bpf-restrict-fs: LSM BPF program attached
lug 10 18:35:32 mulo systemd[1]: Queued start job for default target Graphical Interface.
lug 10 18:35:32 mulo systemd[1]: Created slice Slice /system/dirmngr.
lug 10 18:35:32 mulo systemd[1]: Created slice Slice /system/getty.
lug 10 18:35:32 mulo systemd[1]: Created slice Slice /system/gpg-agent.
lug 10 18:35:32 mulo systemd[1]: Created slice Slice /system/gpg-agent-browser.
lug 10 18:35:32 mulo systemd[1]: Created slice Slice /system/gpg-agent-extra.
lug 10 18:35:32 mulo systemd[1]: Created slice Slice /system/gpg-agent-ssh.
lug 10 18:35:32 mulo systemd[1]: Created slice Slice /system/keyboxd.
lug 10 18:35:32 mulo systemd[1]: Created slice Slice /system/modprobe.
lug 10 18:35:32 mulo systemd[1]: Created slice Encrypted Volume Units Service Slice.
lug 10 18:35:32 mulo systemd[1]: Created slice Slice /system/systemd-fsck.
lug 10 18:35:32 mulo systemd[1]: Created slice Slice /system/vncserver.
lug 10 18:35:32 mulo systemd[1]: Created slice User and Session Slice.
lug 10 18:35:32 mulo systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
lug 10 18:35:32 mulo systemd[1]: Started Forward Password Requests to Wall Directory Watch.
lug 10 18:35:32 mulo systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
lug 10 18:35:32 mulo systemd[1]: Expecting device /dev/disk/by-uuid/00d46560-89a9-4027-93d5-71fa2c8e247e...
lug 10 18:35:32 mulo systemd[1]: Expecting device /dev/disk/by-uuid/245c388e-dec5-4ba7-adf9-c4da95835a16...
lug 10 18:35:32 mulo systemd[1]: Expecting device /dev/disk/by-uuid/6401ad98-a5cf-4ccd-bc97-90d098f9368f...
lug 10 18:35:32 mulo systemd[1]: Expecting device /dev/disk/by-uuid/9f40d3cb-e5ce-4877-bf27-e57d966cd4a4...
lug 10 18:35:32 mulo systemd[1]: Expecting device /dev/disk/by-uuid/BD2A-C15F...
lug 10 18:35:32 mulo systemd[1]: Expecting device /dev/disk/by-uuid/a7818834-7865-407a-b44f-53fcb81be83d...
lug 10 18:35:32 mulo systemd[1]: Expecting device /dev/disk/by-uuid/c561c919-b617-492a-830c-74ababade132...
lug 10 18:35:32 mulo systemd[1]: Expecting device /dev/disk/by-uuid/d405b74f-f22e-4973-86de-a17460f2b1af...
lug 10 18:35:32 mulo systemd[1]: Expecting device /dev/disk/by-uuid/daa95dca-bdba-4e23-ac42-5e9cc33053bc...
lug 10 18:35:32 mulo systemd[1]: Expecting device /dev/disk/by-uuid/dad2d9f0-d032-4959-a92a-b15945b9867b...
lug 10 18:35:32 mulo systemd[1]: Expecting device /dev/disk/by-uuid/e10ab897-b1af-45c8-bb93-9a85d0561900...
lug 10 18:35:32 mulo systemd[1]: Reached target Local Encrypted Volumes.
lug 10 18:35:32 mulo systemd[1]: Reached target Login Prompts.
lug 10 18:35:32 mulo systemd[1]: Reached target Local Integrity Protected Volumes.
lug 10 18:35:32 mulo systemd[1]: Reached target Path Units.
lug 10 18:35:32 mulo systemd[1]: Reached target Remote File Systems.
lug 10 18:35:32 mulo systemd[1]: Reached target Slice Units.
lug 10 18:35:32 mulo systemd[1]: Reached target Swaps.
lug 10 18:35:32 mulo systemd[1]: Reached target Local Verity Protected Volumes.
lug 10 18:35:32 mulo systemd[1]: Listening on Device-mapper event daemon FIFOs.
lug 10 18:35:32 mulo systemd[1]: Listening on LVM2 poll daemon socket.
lug 10 18:35:32 mulo systemd[1]: Listening on Process Core Dump Socket.
lug 10 18:35:32 mulo systemd[1]: Listening on Credential Encryption/Decryption.
lug 10 18:35:32 mulo systemd[1]: Listening on Journal Socket (/dev/log).
lug 10 18:35:32 mulo systemd[1]: Listening on Journal Sockets.
lug 10 18:35:32 mulo systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 10 18:35:32 mulo systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 10 18:35:32 mulo systemd[1]: Listening on udev Control Socket.
lug 10 18:35:32 mulo systemd[1]: Listening on udev Kernel Socket.
lug 10 18:35:32 mulo systemd[1]: Mounting Huge Pages File System...
lug 10 18:35:32 mulo systemd[1]: Mounting POSIX Message Queue File System...
lug 10 18:35:32 mulo systemd[1]: Mounting Kernel Debug File System...
lug 10 18:35:32 mulo systemd[1]: Mounting Kernel Trace File System...
lug 10 18:35:32 mulo systemd[1]: Mounting Temporary Directory /tmp...
lug 10 18:35:32 mulo systemd[1]: Starting Create List of Static Device Nodes...
lug 10 18:35:32 mulo systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
lug 10 18:35:32 mulo systemd[1]: Starting Load Kernel Module configfs...
lug 10 18:35:32 mulo systemd[1]: Starting Load Kernel Module dm_mod...
lug 10 18:35:32 mulo systemd[1]: Starting Load Kernel Module drm...
lug 10 18:35:32 mulo systemd[1]: Starting Load Kernel Module fuse...
lug 10 18:35:32 mulo systemd[1]: Starting Load Kernel Module loop...
lug 10 18:35:32 mulo systemd[1]: Starting Mullvad early boot network blocker...
lug 10 18:35:32 mulo systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
lug 10 18:35:32 mulo systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
lug 10 18:35:32 mulo systemd[1]: Starting Journal Service...
lug 10 18:35:32 mulo systemd[1]: Starting Load Kernel Modules...
lug 10 18:35:32 mulo systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 10 18:35:32 mulo systemd[1]: Starting Remount Root and Kernel File Systems...
lug 10 18:35:32 mulo systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 10 18:35:32 mulo systemd[1]: Starting Load udev Rules from Credentials...
lug 10 18:35:32 mulo systemd[1]: Starting Coldplug All udev Devices...
lug 10 18:35:32 mulo kernel: loop: module loaded
lug 10 18:35:32 mulo systemd[1]: Mounted Huge Pages File System.
lug 10 18:35:32 mulo systemd[1]: Mounted POSIX Message Queue File System.
lug 10 18:35:32 mulo systemd[1]: Mounted Kernel Debug File System.
lug 10 18:35:32 mulo systemd[1]: Mounted Kernel Trace File System.
lug 10 18:35:32 mulo systemd[1]: Mounted Temporary Directory /tmp.
lug 10 18:35:32 mulo systemd[1]: Finished Create List of Static Device Nodes.
lug 10 18:35:32 mulo systemd[1]: modprobe@configfs.service: Deactivated successfully.
lug 10 18:35:32 mulo systemd[1]: Finished Load Kernel Module configfs.
lug 10 18:35:32 mulo systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
lug 10 18:35:32 mulo systemd[1]: Finished Load Kernel Module dm_mod.
lug 10 18:35:32 mulo systemd[1]: modprobe@drm.service: Deactivated successfully.
lug 10 18:35:32 mulo systemd[1]: Finished Load Kernel Module drm.
lug 10 18:35:32 mulo systemd[1]: modprobe@fuse.service: Deactivated successfully.
lug 10 18:35:32 mulo systemd[1]: Finished Load Kernel Module fuse.
lug 10 18:35:32 mulo systemd[1]: modprobe@loop.service: Deactivated successfully.
lug 10 18:35:32 mulo systemd[1]: Finished Load Kernel Module loop.
lug 10 18:35:32 mulo systemd[1]: Finished Load Kernel Modules.
lug 10 18:35:32 mulo systemd[1]: Mounting FUSE Control File System...
lug 10 18:35:32 mulo systemd[1]: Mounting Kernel Configuration File System...
lug 10 18:35:32 mulo systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
lug 10 18:35:32 mulo systemd[1]: Starting Apply Kernel Variables...
lug 10 18:35:32 mulo systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
lug 10 18:35:32 mulo systemd-journald[389]: Collecting audit messages is disabled.
lug 10 18:35:32 mulo kernel: EXT4-fs (dm-1): re-mounted 16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12.
lug 10 18:35:32 mulo systemd[1]: Finished Load udev Rules from Credentials.
lug 10 18:35:32 mulo systemd[1]: Finished Remount Root and Kernel File Systems.
lug 10 18:35:32 mulo systemd[1]: Mounted Kernel Configuration File System.
lug 10 18:35:32 mulo systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
lug 10 18:35:32 mulo systemd[1]: Starting Load/Save OS Random Seed...
lug 10 18:35:32 mulo systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 10 18:35:32 mulo systemd[1]: Mounted FUSE Control File System.
lug 10 18:35:32 mulo systemd[1]: Finished Apply Kernel Variables.
lug 10 18:35:32 mulo systemd[1]: Finished Load/Save OS Random Seed.
lug 10 18:35:32 mulo systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
lug 10 18:35:32 mulo systemd[1]: Create System Users was skipped because no trigger condition checks were met.
lug 10 18:35:32 mulo systemd[1]: Starting Network Name Resolution...
lug 10 18:35:32 mulo systemd[1]: Starting Network Time Synchronization...
lug 10 18:35:32 mulo systemd[1]: Starting Create Static Device Nodes in /dev...
lug 10 18:35:32 mulo systemd[1]: Started Journal Service.
lug 10 18:35:32 mulo systemd-journald[389]: Received client request to flush runtime journal.
lug 10 18:35:32 mulo kernel: mousedev: PS/2 mouse device common for all mice
lug 10 18:35:32 mulo kernel: lpc_ich 0000:00:1f.0: No MFD cells added
lug 10 18:35:32 mulo kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
lug 10 18:35:32 mulo kernel: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
lug 10 18:35:32 mulo kernel: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
lug 10 18:35:32 mulo kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
lug 10 18:35:32 mulo kernel: cfg80211: failed to load regulatory.db
lug 10 18:35:32 mulo kernel: i801_smbus 0000:00:1f.1: SPD Write Disable is set
lug 10 18:35:32 mulo kernel: i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
lug 10 18:35:32 mulo kernel: i2c i2c-0: Successfully instantiated SPD at 0x50
lug 10 18:35:32 mulo kernel: RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
lug 10 18:35:32 mulo kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
lug 10 18:35:32 mulo kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
lug 10 18:35:32 mulo kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
lug 10 18:35:32 mulo kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
lug 10 18:35:32 mulo kernel: Intel(R) Wireless WiFi driver for Linux
lug 10 18:35:32 mulo kernel: iwlwifi 0000:00:0c.0: enabling device (0000 -> 0002)
lug 10 18:35:32 mulo kernel: Bluetooth: Core ver 2.22
lug 10 18:35:32 mulo kernel: NET: Registered PF_BLUETOOTH protocol family
lug 10 18:35:32 mulo kernel: Bluetooth: HCI device and connection manager initialized
lug 10 18:35:32 mulo kernel: Bluetooth: HCI socket layer initialized
lug 10 18:35:32 mulo kernel: Bluetooth: L2CAP socket layer initialized
lug 10 18:35:32 mulo kernel: Bluetooth: SCO socket layer initialized
lug 10 18:35:32 mulo kernel: iwlwifi 0000:00:0c.0: Detected crf-id 0x2816, cnv-id 0x1000100 wfpm id 0x80000000
lug 10 18:35:32 mulo kernel: iwlwifi 0000:00:0c.0: PCI dev 31dc/02a4, rev=0x312, rfid=0x108110
lug 10 18:35:32 mulo kernel: iwlwifi 0000:00:0c.0: Detected Intel(R) Wireless-AC 9462
lug 10 18:35:32 mulo kernel: input: PC Speaker as /devices/platform/pcspkr/input/input6
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 0
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 1
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 2
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 3
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 4
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 6
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 8
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 9
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 10
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 11
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 15
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 16
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 18
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 19
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 20
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 21
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 28
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: loaded firmware version 46.7e3e4b69.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
lug 10 18:35:33 mulo kernel: r8169 0000:02:00.0 eth0: RTL8168h/8111h, 1c:69:7a:af:b4:46, XID 541, IRQ 131
lug 10 18:35:33 mulo kernel: r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
lug 10 18:35:33 mulo kernel: pps_core: LinuxPPS API ver. 1 registered
lug 10 18:35:33 mulo kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
lug 10 18:35:33 mulo kernel: PTP clock support registered
lug 10 18:35:33 mulo kernel: r8169 0000:02:00.0 eno1: renamed from eth0
lug 10 18:35:33 mulo kernel: ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
lug 10 18:35:33 mulo kernel: iwlwifi 0000:00:0c.0: base HW address: 6c:94:66:56:44:a1, OTP minor version: 0x4
lug 10 18:35:34 mulo kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
lug 10 18:35:34 mulo kernel: usbcore: registered new interface driver btusb
lug 10 18:35:34 mulo kernel: Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
lug 10 18:35:34 mulo kernel: Bluetooth: hci0: Device revision is 2
lug 10 18:35:34 mulo kernel: Bluetooth: hci0: Secure boot is enabled
lug 10 18:35:34 mulo kernel: Bluetooth: hci0: OTP lock is enabled
lug 10 18:35:34 mulo kernel: Bluetooth: hci0: API lock is enabled
lug 10 18:35:34 mulo kernel: Bluetooth: hci0: Debug lock is disabled
lug 10 18:35:34 mulo kernel: Bluetooth: hci0: Minimum firmware build 1 week 10 2014
lug 10 18:35:34 mulo kernel: i915 0000:00:02.0: [drm] Unknown revision 0x06
lug 10 18:35:34 mulo kernel: i915 0000:00:02.0: [drm] Found GEMINILAKE (device ID 3184) display version 10.00 stepping **
lug 10 18:35:34 mulo kernel: i915 0000:00:02.0: [drm] Unknown revid 0x06
lug 10 18:35:34 mulo kernel: Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
lug 10 18:35:34 mulo kernel: Bluetooth: hci0: Boot Address: 0x40800
lug 10 18:35:34 mulo kernel: Bluetooth: hci0: Firmware Version: 201-12.24
lug 10 18:35:34 mulo kernel: Console: switching to colour dummy device 80x25
lug 10 18:35:34 mulo kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
lug 10 18:35:34 mulo kernel: i915 0000:00:02.0: [drm] couldn't get memory information
lug 10 18:35:34 mulo kernel: iwlwifi 0000:00:0c.0 wlo2: renamed from wlan0
lug 10 18:35:34 mulo kernel: i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
lug 10 18:35:34 mulo kernel: i915 0000:00:02.0: [drm] Applying Increase DDI Disabled quirk
lug 10 18:35:34 mulo kernel: i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
lug 10 18:35:34 mulo kernel: mei_hdcp 0000:00:0f.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
lug 10 18:35:34 mulo kernel: [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1
lug 10 18:35:34 mulo kernel: ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
lug 10 18:35:34 mulo kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
lug 10 18:35:34 mulo kernel: i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
lug 10 18:35:34 mulo kernel: intel_telemetry_core Init
lug 10 18:35:34 mulo kernel: snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
lug 10 18:35:34 mulo kernel: Invalid pltconfig, ensure IPC1 device is enabled in BIOS
lug 10 18:35:34 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
lug 10 18:35:34 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
lug 10 18:35:34 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
lug 10 18:35:34 mulo kernel: intel_rapl_common: Found RAPL domain package
lug 10 18:35:34 mulo kernel: intel_rapl_common: Found RAPL domain core
lug 10 18:35:34 mulo kernel: intel_rapl_common: Found RAPL domain uncore
lug 10 18:35:34 mulo kernel: intel_rapl_common: Found RAPL domain dram
lug 10 18:35:35 mulo kernel: EXT4-fs (dm-2): mounted filesystem 245c388e-dec5-4ba7-adf9-c4da95835a16 r/w with ordered data mode. Quota mode: none.
lug 10 18:35:35 mulo kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
lug 10 18:35:35 mulo kernel: Bluetooth: BNEP filters: protocol multicast
lug 10 18:35:35 mulo kernel: Bluetooth: BNEP socket layer initialized
lug 10 18:35:35 mulo kernel: Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
lug 10 18:35:35 mulo kernel: Bluetooth: hci0: Waiting for firmware download to complete
lug 10 18:35:35 mulo kernel: Bluetooth: hci0: Firmware loaded in 1410716 usecs
lug 10 18:35:35 mulo kernel: Bluetooth: hci0: Waiting for device to boot
lug 10 18:35:35 mulo kernel: Bluetooth: hci0: Device booted in 13299 usecs
lug 10 18:35:35 mulo kernel: Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
lug 10 18:35:35 mulo kernel: Bluetooth: hci0: Applying Intel DDC parameters completed
lug 10 18:35:35 mulo kernel: Bluetooth: hci0: Firmware revision 0.1 build 201 week 12 2024
lug 10 18:35:35 mulo kernel: Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
lug 10 18:35:35 mulo kernel: Bluetooth: MGMT ver 1.23
lug 10 18:35:35 mulo kernel: NET: Registered PF_ALG protocol family
lug 10 18:35:35 mulo kernel: r8169 0000:02:00.0 eno1: Link is Down
lug 10 18:35:35 mulo kernel: EXT4-fs (dm-3): warning: mounting fs with errors, running e2fsck is recommended
lug 10 18:35:35 mulo kernel: EXT4-fs (dm-3): mounted filesystem d405b74f-f22e-4973-86de-a17460f2b1af r/w with ordered data mode. Quota mode: none.
lug 10 18:35:35 mulo kernel: iwlwifi 0000:00:0c.0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
lug 10 18:35:35 mulo kernel: iwlwifi 0000:00:0c.0: Registered PHC clock: iwlwifi-PTP, with index: 0
lug 10 18:35:36 mulo kernel: EXT4-fs (dm-4): recovery complete
lug 10 18:35:36 mulo kernel: EXT4-fs (dm-4): mounted filesystem 9f40d3cb-e5ce-4877-bf27-e57d966cd4a4 r/w with ordered data mode. Quota mode: none.
lug 10 18:35:36 mulo kernel: iwlwifi 0000:00:0c.0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
lug 10 18:35:36 mulo kernel: EXT4-fs (dm-5): mounted filesystem e10ab897-b1af-45c8-bb93-9a85d0561900 r/w with ordered data mode. Quota mode: none.
lug 10 18:35:38 mulo kernel: Bluetooth: RFCOMM TTY layer initialized
lug 10 18:35:38 mulo kernel: Bluetooth: RFCOMM socket layer initialized
lug 10 18:35:38 mulo kernel: Bluetooth: RFCOMM ver 1.11
lug 10 18:35:38 mulo kernel: r8169 0000:02:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
lug 10 18:35:40 mulo kernel: wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
lug 10 18:35:40 mulo kernel: wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
lug 10 18:35:46 mulo kernel: usb 2-3: USB disconnect, device number 4
lug 10 18:35:46 mulo kernel: sd 3:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
lug 10 18:35:46 mulo kernel: sd 3:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 6c 00 18 08 00 00 78 00
lug 10 18:35:46 mulo kernel: I/O error, dev sdc, sector 1811945480 op 0x0:(READ) flags 0x83700 phys_seg 15 prio class 0
lug 10 18:35:46 mulo kernel: sd 3:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
lug 10 18:35:46 mulo kernel: sd 3:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 6c 40 18 00 00 00 80 00
lug 10 18:35:46 mulo kernel: I/O error, dev sdc, sector 1816139776 op 0x0:(READ) flags 0x83700 phys_seg 16 prio class 0
lug 10 18:35:46 mulo kernel: device offline error, dev sdc, sector 1820334080 op 0x0:(READ) flags 0x83700 phys_seg 16 prio class 0
lug 10 18:35:46 mulo kernel: device offline error, dev sdc, sector 1824528384 op 0x0:(READ) flags 0x83700 phys_seg 16 prio class 0
lug 10 18:35:46 mulo kernel: device offline error, dev sdc, sector 1828722688 op 0x0:(READ) flags 0x83700 phys_seg 16 prio class 0
lug 10 18:35:46 mulo kernel: device offline error, dev sdc, sector 1832916992 op 0x0:(READ) flags 0x83700 phys_seg 16 prio class 0
lug 10 18:35:46 mulo kernel: device offline error, dev sdc, sector 1837111296 op 0x0:(READ) flags 0x83700 phys_seg 16 prio class 0
lug 10 18:35:46 mulo kernel: device offline error, dev sdc, sector 1841305600 op 0x0:(READ) flags 0x83700 phys_seg 16 prio class 0
lug 10 18:35:46 mulo kernel: device offline error, dev sdc, sector 1841305720 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
lug 10 18:35:46 mulo kernel: EXT4-fs error (device dm-2): ext4_wait_block_bitmap:582: comm ext4lazyinit: Cannot read block bitmap - block_group = 7039, block_bitmap = 230162447
lug 10 18:35:46 mulo kernel: Buffer I/O error on dev dm-2, logical block 121667584, lost sync page write
lug 10 18:35:46 mulo kernel: JBD2: I/O error when updating journal superblock for dm-2-8.
lug 10 18:35:46 mulo kernel: Aborting journal on device dm-2-8.
lug 10 18:35:46 mulo kernel: Buffer I/O error on dev dm-2, logical block 121667584, lost sync page write
lug 10 18:35:46 mulo kernel: JBD2: I/O error when updating journal superblock for dm-2-8.
lug 10 18:35:46 mulo kernel: EXT4-fs (dm-2): unmounting filesystem 245c388e-dec5-4ba7-adf9-c4da95835a16.
lug 10 18:35:46 mulo kernel: sd 3:0:0:0: [sdc] Synchronizing SCSI cache
lug 10 18:35:46 mulo kernel: sd 3:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
lug 10 18:35:46 mulo kernel: Buffer I/O error on dev dm-2, logical block 0, lost sync page write
lug 10 18:35:46 mulo kernel: EXT4-fs (dm-2): I/O error while writing superblock
lug 10 18:35:46 mulo kernel: usb 2-3: new SuperSpeed USB device number 7 using xhci_hcd
lug 10 18:35:46 mulo kernel: usb 2-3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 10 18:35:46 mulo kernel: usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 10 18:35:46 mulo kernel: usb 2-3: Product: Ugreen Storage Device
lug 10 18:35:46 mulo kernel: usb 2-3: Manufacturer: Ugreen
lug 10 18:35:46 mulo kernel: usb 2-3: SerialNumber: 022004019C85
lug 10 18:35:46 mulo kernel: usb 2-3: UAS is ignored for this device, using usb-storage instead
lug 10 18:35:46 mulo kernel: usb-storage 2-3:1.0: USB Mass Storage device detected
lug 10 18:35:46 mulo kernel: usb-storage 2-3:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 10 18:35:46 mulo kernel: scsi host3: usb-storage 2-3:1.0
lug 10 18:35:47 mulo kernel: scsi 3:0:0:0: Direct-Access     TOSHIBA  MQ01ABD100       0    PQ: 0 ANSI: 6
lug 10 18:35:47 mulo kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 10 18:35:47 mulo kernel: sd 3:0:0:0: [sdc] 4096-byte physical blocks
lug 10 18:35:47 mulo kernel: sd 3:0:0:0: [sdc] Write Protect is off
lug 10 18:35:47 mulo kernel: sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00
lug 10 18:35:47 mulo kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 10 18:35:47 mulo kernel:  sdc: sdc1
lug 10 18:35:47 mulo kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
lug 10 18:36:03 mulo kernel: usb 2-4: USB disconnect, device number 6
lug 10 18:36:03 mulo kernel: sd 5:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
lug 10 18:36:03 mulo kernel: sd 5:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 22 88 03 00 00 00 05 00
lug 10 18:36:03 mulo kernel: I/O error, dev sdd, sector 4634712064 op 0x0:(READ) flags 0x83700 phys_seg 5 prio class 0
lug 10 18:36:03 mulo kernel: device offline error, dev sdd, sector 4634712112 op 0x0:(READ) flags 0x83700 phys_seg 2 prio class 0
lug 10 18:36:03 mulo kernel: device offline error, dev sdd, sector 4634712136 op 0x0:(READ) flags 0x83700 phys_seg 1 prio class 0
lug 10 18:36:03 mulo kernel: device offline error, dev sdd, sector 4634712152 op 0x0:(READ) flags 0x83700 phys_seg 5 prio class 0
lug 10 18:36:03 mulo kernel: device offline error, dev sdd, sector 4638906368 op 0x0:(READ) flags 0x83700 phys_seg 5 prio class 0
lug 10 18:36:03 mulo kernel: device offline error, dev sdd, sector 4638906480 op 0x0:(READ) flags 0x83700 phys_seg 2 prio class 0
lug 10 18:36:03 mulo kernel: device offline error, dev sdd, sector 4643100672 op 0x0:(READ) flags 0x83700 phys_seg 6 prio class 0
lug 10 18:36:03 mulo kernel: device offline error, dev sdd, sector 4643100728 op 0x0:(READ) flags 0x83700 phys_seg 1 prio class 0
lug 10 18:36:03 mulo kernel: device offline error, dev sdd, sector 4643100744 op 0x0:(READ) flags 0x83700 phys_seg 1 prio class 0
lug 10 18:36:03 mulo kernel: device offline error, dev sdd, sector 4643100760 op 0x0:(READ) flags 0x83700 phys_seg 1 prio class 0
lug 10 18:36:03 mulo kernel: EXT4-fs error (device dm-3): ext4_wait_block_bitmap:582: comm ext4lazyinit: Cannot read block bitmap - block_group = 17791, block_bitmap = 582483983
lug 10 18:36:03 mulo kernel: EXT4-fs error (device dm-3): ext4_wait_block_bitmap:582: comm ext4lazyinit: Cannot read block bitmap - block_group = 17919, block_bitmap = 586678287
lug 10 18:36:03 mulo kernel: EXT4-fs error (device dm-3): ext4_wait_block_bitmap:582: comm ext4lazyinit: Cannot read block bitmap - block_group = 18047, block_bitmap = 590872591
lug 10 18:36:03 mulo kernel: EXT4-fs error (device dm-3): ext4_wait_block_bitmap:582: comm ext4lazyinit: Cannot read block bitmap - block_group = 18175, block_bitmap = 595066895
lug 10 18:36:03 mulo kernel: EXT4-fs error (device dm-3): ext4_wait_block_bitmap:582: comm ext4lazyinit: Cannot read block bitmap - block_group = 18303, block_bitmap = 599261199
lug 10 18:36:03 mulo kernel: EXT4-fs error (device dm-3): ext4_wait_block_bitmap:582: comm ext4lazyinit: Cannot read block bitmap - block_group = 18416, block_bitmap = 603455488
lug 10 18:36:03 mulo kernel: EXT4-fs error (device dm-3): ext4_wait_block_bitmap:582: comm ext4lazyinit: Cannot read block bitmap - block_group = 18559, block_bitmap = 607649807
lug 10 18:36:03 mulo kernel: EXT4-fs error (device dm-3): ext4_wait_block_bitmap:582: comm ext4lazyinit: Cannot read block bitmap - block_group = 18687, block_bitmap = 611844111
lug 10 18:36:03 mulo kernel: EXT4-fs error (device dm-3): ext4_wait_block_bitmap:582: comm ext4lazyinit: Cannot read block bitmap - block_group = 18815, block_bitmap = 616038415
lug 10 18:36:03 mulo kernel: EXT4-fs error (device dm-3): ext4_wait_block_bitmap:582: comm ext4lazyinit: Cannot read block bitmap - block_group = 18939, block_bitmap = 620232715
lug 10 18:36:03 mulo kernel: Aborting journal on device dm-3-8.
lug 10 18:36:03 mulo kernel: Buffer I/O error on dev dm-3, logical block 488144896, lost sync page write
lug 10 18:36:03 mulo kernel: JBD2: I/O error when updating journal superblock for dm-3-8.
lug 10 18:36:03 mulo kernel: EXT4-fs (dm-3): unmounting filesystem d405b74f-f22e-4973-86de-a17460f2b1af.
lug 10 18:36:03 mulo kernel: Buffer I/O error on dev dm-3, logical block 0, lost sync page write
lug 10 18:36:03 mulo kernel: EXT4-fs (dm-3): I/O error while writing superblock
lug 10 18:36:03 mulo kernel: usb 2-4: new SuperSpeed USB device number 8 using xhci_hcd
lug 10 18:36:03 mulo kernel: usb 2-4: New USB device found, idVendor=1058, idProduct=1230, bcdDevice=10.50
lug 10 18:36:03 mulo kernel: usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 10 18:36:03 mulo kernel: usb 2-4: Product: My Book 1230
lug 10 18:36:03 mulo kernel: usb 2-4: Manufacturer: Western Digital
lug 10 18:36:03 mulo kernel: usb 2-4: SerialNumber: 574343344530393137333939
lug 10 18:36:03 mulo kernel: usb-storage 2-4:1.0: USB Mass Storage device detected
lug 10 18:36:03 mulo kernel: usb-storage 2-4:1.0: Quirks match for vid 1058 pid 1230: 800000
lug 10 18:36:03 mulo kernel: scsi host6: usb-storage 2-4:1.0
lug 10 18:36:04 mulo kernel: scsi 6:0:0:0: Direct-Access     WD       My Book 1230     1050 PQ: 0 ANSI: 6
lug 10 18:36:04 mulo kernel: scsi 6:0:0:1: Enclosure         WD       SES Device       1050 PQ: 0 ANSI: 6
lug 10 18:36:04 mulo kernel: ses 6:0:0:1: Attached Enclosure device
lug 10 18:36:04 mulo kernel: sd 6:0:0:0: [sdf] 976746240 4096-byte logical blocks: (4.00 TB/3.64 TiB)
lug 10 18:36:04 mulo kernel: sd 6:0:0:0: [sdf] Write Protect is off
lug 10 18:36:04 mulo kernel: sd 6:0:0:0: [sdf] Mode Sense: 53 00 10 08
lug 10 18:36:04 mulo kernel: ses 6:0:0:1: Failed to get diagnostic page 0x1
lug 10 18:36:04 mulo kernel: ses 6:0:0:1: Failed to bind enclosure -19
lug 10 18:36:04 mulo kernel: sd 6:0:0:0: [sdf] No Caching mode page found
lug 10 18:36:04 mulo kernel: sd 6:0:0:0: [sdf] Assuming drive cache: write through
lug 10 18:36:04 mulo kernel:  sdf: sdf1
lug 10 18:36:04 mulo kernel: sd 6:0:0:0: [sdf] Attached SCSI disk
lug 10 18:36:41 mulo kernel: WARNING! power/level is deprecated; use power/control instead
lug 10 18:36:49 mulo kernel: block sdb: the capability attribute has been deprecated.

Last edited by pepper (2025-07-10 16:43:26)

seth · 2025-07-10 22:41:42

lug 10 17:53:12 mulo kernel: usb 2-1: USB disconnect, device number 2
lug 10 17:53:12 mulo kernel: sd 2:0:0:0: [sde] Synchronizing SCSI cache
lug 10 17:53:12 mulo kernel: sd 2:0:0:0: [sde] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
lug 10 17:53:12 mulo kernel: EXT4-fs (dm-4): unmounting filesystem 9f40d3cb-e5ce-4877-bf27-e57d966cd4a4.
lug 10 17:53:12 mulo kernel: Buffer I/O error on dev dm-4, logical block 0, lost sync page write
lug 10 17:53:12 mulo kernel: EXT4-fs (dm-4): I/O error while writing superblock

https://wiki.archlinux.org/title/Power_ … utosuspend

pepper · 2025-07-11 07:27:20

I blacklisted all hdd for autosuspend and rebooted:
/etc/udev/rules.d/50-usb_power_save.rules

# blacklist for usb autosuspend
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="174c", ATTR{idProduct}=="55aa", GOTO="power_usb_rules_end"
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="1058", ATTR{idProduct}=="1230", GOTO="power_usb_rules_end"
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="152d", ATTR{idProduct}=="0576", GOTO="power_usb_rules_end"
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="0bda", ATTR{idProduct}=="0411", GOTO="power_usb_rules_end"
ACTION=="add", SUBSYSTEM=="usb", TEST=="power/control", ATTR{power/control}="auto"
LABEL="power_usb_rules_end"

Devices unmount again after 2-3min after boot
journalctl -k -b

lug 11 09:12:29 mulo kernel: Linux version 6.12.36-1-lts (linux-lts@archlinux) (gcc (GCC) 15.1.1 20250425, GNU ld (GNU Binutils) 2.44.0) #1 SMP PREEMPT_DYNAMIC Sun, 06 Jul 2025 12:59:22 +0000
lug 11 09:12:29 mulo kernel: Command line: BOOT_IMAGE=/vmlinuz-linux-lts root=/dev/mapper/volgroup_0-lv_root rw cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm root=/dev/volgroup_0/lv_root loglevel=3 quiet
lug 11 09:12:29 mulo kernel: BIOS-provided physical RAM map:
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x0000000000040000-0x0000000000058fff] usable
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x0000000000059000-0x0000000000059fff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x000000000005a000-0x000000000009dfff] usable
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x0000000012151000-0x00000000773d8fff] usable
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x00000000773d9000-0x0000000079c9dfff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x0000000079c9e000-0x0000000079cc1fff] ACPI data
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x0000000079cc2000-0x0000000079d21fff] ACPI NVS
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x0000000079d22000-0x000000007a0b6fff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x000000007a0b7000-0x000000007a170fff] type 20
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x000000007a171000-0x000000007a564fff] usable
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x000000007a565000-0x000000007a610fff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x000000007a611000-0x000000007abfffff] usable
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x000000007ac00000-0x000000007fffffff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
lug 11 09:12:29 mulo kernel: BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
lug 11 09:12:29 mulo kernel: NX (Execute Disable) protection: active
lug 11 09:12:29 mulo kernel: APIC: Static calls initialized
lug 11 09:12:29 mulo kernel: efi: EFI v2.7 by American Megatrends
lug 11 09:12:29 mulo kernel: efi: ACPI 2.0=0x79cae000 ACPI=0x79cae000 SMBIOS=0x79f6f000 SMBIOS 3.0=0x79f6e000 MEMATTR=0x72de3018 ESRT=0x79f4af18 
lug 11 09:12:29 mulo kernel: efi: Remove mem50: MMIO range=[0xd0000000-0xd0ffffff] (16MB) from e820 map
lug 11 09:12:29 mulo kernel: e820: remove [mem 0xd0000000-0xd0ffffff] reserved
lug 11 09:12:29 mulo kernel: efi: Not removing mem51: MMIO range=[0xd3709000-0xd3709fff] (4KB) from e820 map
lug 11 09:12:29 mulo kernel: efi: Remove mem52: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
lug 11 09:12:29 mulo kernel: e820: remove [mem 0xe0000000-0xefffffff] reserved
lug 11 09:12:29 mulo kernel: efi: Not removing mem53: MMIO range=[0xfe042000-0xfe042fff] (4KB) from e820 map
lug 11 09:12:29 mulo kernel: efi: Not removing mem54: MMIO range=[0xfe043000-0xfe043fff] (4KB) from e820 map
lug 11 09:12:29 mulo kernel: efi: Not removing mem55: MMIO range=[0xfe044000-0xfe044fff] (4KB) from e820 map
lug 11 09:12:29 mulo kernel: efi: Not removing mem56: MMIO range=[0xfe900000-0xfe902fff] (12KB) from e820 map
lug 11 09:12:29 mulo kernel: efi: Not removing mem57: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
lug 11 09:12:29 mulo kernel: efi: Not removing mem58: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map
lug 11 09:12:29 mulo kernel: efi: Not removing mem59: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
lug 11 09:12:29 mulo kernel: efi: Remove mem60: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
lug 11 09:12:29 mulo kernel: e820: remove [mem 0xff000000-0xffffffff] reserved
lug 11 09:12:29 mulo kernel: SMBIOS 3.2.0 present.
lug 11 09:12:29 mulo kernel: DMI: Intel(R) Client Systems NUC7PJYHN/NUC7JYB, BIOS JYGLKCPX.86A.0065.2021.0722.1137 07/22/2021
lug 11 09:12:29 mulo kernel: DMI: Memory slots populated: 2/2
lug 11 09:12:29 mulo kernel: tsc: Detected 1996.800 MHz processor
lug 11 09:12:29 mulo kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
lug 11 09:12:29 mulo kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
lug 11 09:12:29 mulo kernel: last_pfn = 0x280000 max_arch_pfn = 0x400000000
lug 11 09:12:29 mulo kernel: MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs
lug 11 09:12:29 mulo kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
lug 11 09:12:29 mulo kernel: last_pfn = 0x7ac00 max_arch_pfn = 0x400000000
lug 11 09:12:29 mulo kernel: esrt: Reserving ESRT space from 0x0000000079f4af18 to 0x0000000079f4af50.
lug 11 09:12:29 mulo kernel: Using GB pages for direct mapping
lug 11 09:12:29 mulo kernel: Secure boot disabled
lug 11 09:12:29 mulo kernel: RAMDISK: [mem 0x34209000-0x360fbfff]
lug 11 09:12:29 mulo kernel: ACPI: Early table checksum verification disabled
lug 11 09:12:29 mulo kernel: ACPI: RSDP 0x0000000079CAE000 000024 (v02 INTEL )
lug 11 09:12:29 mulo kernel: ACPI: XSDT 0x0000000079CAE0B0 0000D4 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 09:12:29 mulo kernel: ACPI: FACP 0x0000000079CBB630 000114 (v06 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 09:12:29 mulo kernel: ACPI: DSDT 0x0000000079CAE230 00D3FB (v02 INTEL  NUC7CJYB 01072009 INTL 20160930)
lug 11 09:12:29 mulo kernel: ACPI: FACS 0x0000000079D21080 000040
lug 11 09:12:29 mulo kernel: ACPI: FPDT 0x0000000079CBB750 000044 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 09:12:29 mulo kernel: ACPI: FIDT 0x0000000079CBB7A0 00009C (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 09:12:29 mulo kernel: ACPI: MCFG 0x0000000079CBB840 00003C (v01 INTEL  NUC7CJYB 01072009 MSFT 00000097)
lug 11 09:12:29 mulo kernel: ACPI: DBG2 0x0000000079CBB880 000072 (v00 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 09:12:29 mulo kernel: ACPI: DBGP 0x0000000079CBB900 000034 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 09:12:29 mulo kernel: ACPI: HPET 0x0000000079CBB940 000038 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 09:12:29 mulo kernel: ACPI: LPIT 0x0000000079CBB980 00005C (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 09:12:29 mulo kernel: ACPI: APIC 0x0000000079CBB9E0 000084 (v04 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 09:12:29 mulo kernel: ACPI: NPKT 0x0000000079CBBA70 000065 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 09:12:29 mulo kernel: ACPI: SSDT 0x0000000079CBBAE0 0010B3 (v02 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 09:12:29 mulo kernel: ACPI: SSDT 0x0000000079CBCBA0 0009FF (v01 INTEL  NUC7CJYB 00001000 INTL 20160930)
lug 11 09:12:29 mulo kernel: ACPI: SSDT 0x0000000079CBD5A0 0000B1 (v01 INTEL  NUC7CJYB 00001000 INTL 20160930)
lug 11 09:12:29 mulo kernel: ACPI: SSDT 0x0000000079CBD660 000661 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 09:12:29 mulo kernel: ACPI: SSDT 0x0000000079CBDCD0 000775 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 09:12:29 mulo kernel: ACPI: SSDT 0x0000000079CBE450 00035F (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 09:12:29 mulo kernel: ACPI: SSDT 0x0000000079CBE7B0 0001E6 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 09:12:29 mulo kernel: ACPI: SSDT 0x0000000079CBE9A0 00286F (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 09:12:29 mulo kernel: ACPI: BGRT 0x0000000079CC1210 000038 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 09:12:29 mulo kernel: ACPI: DMAR 0x0000000079CC1250 0000A8 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 09:12:29 mulo kernel: ACPI: WDAT 0x0000000079CC1300 000104 (v01 INTEL  NUC7CJYB 00000000      00000000)
lug 11 09:12:29 mulo kernel: ACPI: WSMT 0x0000000079CC1410 000028 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 09:12:29 mulo kernel: ACPI: Reserving FACP table memory at [mem 0x79cbb630-0x79cbb743]
lug 11 09:12:29 mulo kernel: ACPI: Reserving DSDT table memory at [mem 0x79cae230-0x79cbb62a]
lug 11 09:12:29 mulo kernel: ACPI: Reserving FACS table memory at [mem 0x79d21080-0x79d210bf]
lug 11 09:12:29 mulo kernel: ACPI: Reserving FPDT table memory at [mem 0x79cbb750-0x79cbb793]
lug 11 09:12:29 mulo kernel: ACPI: Reserving FIDT table memory at [mem 0x79cbb7a0-0x79cbb83b]
lug 11 09:12:29 mulo kernel: ACPI: Reserving MCFG table memory at [mem 0x79cbb840-0x79cbb87b]
lug 11 09:12:29 mulo kernel: ACPI: Reserving DBG2 table memory at [mem 0x79cbb880-0x79cbb8f1]
lug 11 09:12:29 mulo kernel: ACPI: Reserving DBGP table memory at [mem 0x79cbb900-0x79cbb933]
lug 11 09:12:29 mulo kernel: ACPI: Reserving HPET table memory at [mem 0x79cbb940-0x79cbb977]
lug 11 09:12:29 mulo kernel: ACPI: Reserving LPIT table memory at [mem 0x79cbb980-0x79cbb9db]
lug 11 09:12:29 mulo kernel: ACPI: Reserving APIC table memory at [mem 0x79cbb9e0-0x79cbba63]
lug 11 09:12:29 mulo kernel: ACPI: Reserving NPKT table memory at [mem 0x79cbba70-0x79cbbad4]
lug 11 09:12:29 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbbae0-0x79cbcb92]
lug 11 09:12:29 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbcba0-0x79cbd59e]
lug 11 09:12:29 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbd5a0-0x79cbd650]
lug 11 09:12:29 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbd660-0x79cbdcc0]
lug 11 09:12:29 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbdcd0-0x79cbe444]
lug 11 09:12:29 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe450-0x79cbe7ae]
lug 11 09:12:29 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe7b0-0x79cbe995]
lug 11 09:12:29 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe9a0-0x79cc120e]
lug 11 09:12:29 mulo kernel: ACPI: Reserving BGRT table memory at [mem 0x79cc1210-0x79cc1247]
lug 11 09:12:29 mulo kernel: ACPI: Reserving DMAR table memory at [mem 0x79cc1250-0x79cc12f7]
lug 11 09:12:29 mulo kernel: ACPI: Reserving WDAT table memory at [mem 0x79cc1300-0x79cc1403]
lug 11 09:12:29 mulo kernel: ACPI: Reserving WSMT table memory at [mem 0x79cc1410-0x79cc1437]
lug 11 09:12:29 mulo kernel: No NUMA configuration found
lug 11 09:12:29 mulo kernel: Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
lug 11 09:12:29 mulo kernel: NODE_DATA(0) allocated [mem 0x27ffd52c0-0x27fffffff]
lug 11 09:12:29 mulo kernel: Zone ranges:
lug 11 09:12:29 mulo kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
lug 11 09:12:29 mulo kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
lug 11 09:12:29 mulo kernel:   Normal   [mem 0x0000000100000000-0x000000027fffffff]
lug 11 09:12:29 mulo kernel:   Device   empty
lug 11 09:12:29 mulo kernel: Movable zone start for each node
lug 11 09:12:29 mulo kernel: Early memory node ranges
lug 11 09:12:29 mulo kernel:   node   0: [mem 0x0000000000001000-0x000000000003efff]
lug 11 09:12:29 mulo kernel:   node   0: [mem 0x0000000000040000-0x0000000000058fff]
lug 11 09:12:29 mulo kernel:   node   0: [mem 0x000000000005a000-0x000000000009dfff]
lug 11 09:12:29 mulo kernel:   node   0: [mem 0x0000000000100000-0x000000000fffffff]
lug 11 09:12:29 mulo kernel:   node   0: [mem 0x0000000012151000-0x00000000773d8fff]
lug 11 09:12:29 mulo kernel:   node   0: [mem 0x000000007a171000-0x000000007a564fff]
lug 11 09:12:29 mulo kernel:   node   0: [mem 0x000000007a611000-0x000000007abfffff]
lug 11 09:12:29 mulo kernel:   node   0: [mem 0x0000000100000000-0x000000027fffffff]
lug 11 09:12:29 mulo kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
lug 11 09:12:29 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 11 09:12:29 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 11 09:12:29 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 11 09:12:29 mulo kernel: On node 0, zone DMA: 98 pages in unavailable ranges
lug 11 09:12:29 mulo kernel: On node 0, zone DMA32: 8529 pages in unavailable ranges
lug 11 09:12:29 mulo kernel: On node 0, zone DMA32: 11672 pages in unavailable ranges
lug 11 09:12:29 mulo kernel: On node 0, zone DMA32: 172 pages in unavailable ranges
lug 11 09:12:29 mulo kernel: On node 0, zone Normal: 21504 pages in unavailable ranges
lug 11 09:12:29 mulo kernel: Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
lug 11 09:12:29 mulo kernel: ACPI: PM-Timer IO Port: 0x408
lug 11 09:12:29 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
lug 11 09:12:29 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
lug 11 09:12:29 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
lug 11 09:12:29 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
lug 11 09:12:29 mulo kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
lug 11 09:12:29 mulo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
lug 11 09:12:29 mulo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
lug 11 09:12:29 mulo kernel: ACPI: Using ACPI (MADT) for SMP configuration information
lug 11 09:12:29 mulo kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
lug 11 09:12:29 mulo kernel: e820: update [mem 0x73d75000-0x73e0efff] usable ==> reserved
lug 11 09:12:29 mulo kernel: TSC deadline timer available
lug 11 09:12:29 mulo kernel: CPU topo: Max. logical packages:   1
lug 11 09:12:29 mulo kernel: CPU topo: Max. logical dies:       1
lug 11 09:12:29 mulo kernel: CPU topo: Max. dies per package:   1
lug 11 09:12:29 mulo kernel: CPU topo: Max. threads per core:   1
lug 11 09:12:29 mulo kernel: CPU topo: Num. cores per package:     4
lug 11 09:12:29 mulo kernel: CPU topo: Num. threads per package:   4
lug 11 09:12:29 mulo kernel: CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
lug 11 09:12:29 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
lug 11 09:12:29 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
lug 11 09:12:29 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x00059000-0x00059fff]
lug 11 09:12:29 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
lug 11 09:12:29 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x10000000-0x12150fff]
lug 11 09:12:29 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x73d75000-0x73e0efff]
lug 11 09:12:29 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x773d9000-0x7a170fff]
lug 11 09:12:29 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x7a565000-0x7a610fff]
lug 11 09:12:29 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0xffffffff]
lug 11 09:12:29 mulo kernel: [mem 0x80000000-0xd3708fff] available for PCI devices
lug 11 09:12:29 mulo kernel: Booting paravirtualized kernel on bare hardware
lug 11 09:12:29 mulo kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
lug 11 09:12:29 mulo kernel: setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
lug 11 09:12:29 mulo kernel: percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u524288
lug 11 09:12:29 mulo kernel: pcpu-alloc: s237568 r8192 d28672 u524288 alloc=1*2097152
lug 11 09:12:29 mulo kernel: pcpu-alloc: [0] 0 1 2 3 
lug 11 09:12:29 mulo kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=/dev/mapper/volgroup_0-lv_root rw cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm root=/dev/volgroup_0/lv_root loglevel=3 quiet
lug 11 09:12:29 mulo kernel: Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux-lts cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm", will be passed to user space.
lug 11 09:12:29 mulo kernel: random: crng init done
lug 11 09:12:29 mulo kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
lug 11 09:12:29 mulo kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
lug 11 09:12:29 mulo kernel: Fallback order for Node 0: 0 
lug 11 09:12:29 mulo kernel: Built 1 zonelists, mobility grouping on.  Total pages: 2055174
lug 11 09:12:29 mulo kernel: Policy zone: Normal
lug 11 09:12:29 mulo kernel: mem auto-init: stack:all(zero), heap alloc:on, heap free:off
lug 11 09:12:29 mulo kernel: software IO TLB: area num 4.
lug 11 09:12:29 mulo kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
lug 11 09:12:29 mulo kernel: ftrace: allocating 51450 entries in 201 pages
lug 11 09:12:29 mulo kernel: ftrace: allocated 201 pages with 4 groups
lug 11 09:12:29 mulo kernel: Dynamic Preempt: voluntary
lug 11 09:12:29 mulo kernel: rcu: Preemptible hierarchical RCU implementation.
lug 11 09:12:29 mulo kernel: rcu:         RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
lug 11 09:12:29 mulo kernel: rcu:         RCU priority boosting: priority 1 delay 500 ms.
lug 11 09:12:29 mulo kernel:         Trampoline variant of Tasks RCU enabled.
lug 11 09:12:29 mulo kernel:         Rude variant of Tasks RCU enabled.
lug 11 09:12:29 mulo kernel:         Tracing variant of Tasks RCU enabled.
lug 11 09:12:29 mulo kernel: rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
lug 11 09:12:29 mulo kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
lug 11 09:12:29 mulo kernel: RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 11 09:12:29 mulo kernel: RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 11 09:12:29 mulo kernel: RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 11 09:12:29 mulo kernel: NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
lug 11 09:12:29 mulo kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention.
lug 11 09:12:29 mulo kernel: kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
lug 11 09:12:29 mulo kernel: Console: colour dummy device 80x25
lug 11 09:12:29 mulo kernel: printk: legacy console [tty0] enabled
lug 11 09:12:29 mulo kernel: ACPI: Core revision 20240827
lug 11 09:12:29 mulo kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
lug 11 09:12:29 mulo kernel: APIC: Switch to symmetric I/O mode setup
lug 11 09:12:29 mulo kernel: DMAR: Host address width 39
lug 11 09:12:29 mulo kernel: DMAR: DRHD base: 0x000000fed64000 flags: 0x0
lug 11 09:12:29 mulo kernel: DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
lug 11 09:12:29 mulo kernel: DMAR: DRHD base: 0x000000fed65000 flags: 0x1
lug 11 09:12:29 mulo kernel: DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
lug 11 09:12:29 mulo kernel: DMAR: RMRR base: 0x00000079c3c000 end: 0x00000079c5bfff
lug 11 09:12:29 mulo kernel: DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
lug 11 09:12:29 mulo kernel: DMAR-IR: IOAPIC id 1 under DRHD base  0xfed65000 IOMMU 1
lug 11 09:12:29 mulo kernel: DMAR-IR: HPET id 0 under DRHD base 0xfed65000
lug 11 09:12:29 mulo kernel: DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
lug 11 09:12:29 mulo kernel: DMAR-IR: Enabled IRQ remapping in x2apic mode
lug 11 09:12:29 mulo kernel: x2apic enabled
lug 11 09:12:29 mulo kernel: APIC: Switched APIC routing to: cluster x2apic
lug 11 09:12:29 mulo kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
lug 11 09:12:29 mulo kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
lug 11 09:12:29 mulo kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3995.00 BogoMIPS (lpj=6656000)
lug 11 09:12:29 mulo kernel: x86/cpu: SGX disabled or unsupported by BIOS.
lug 11 09:12:29 mulo kernel: CPU0: Thermal monitoring enabled (TM1)
lug 11 09:12:29 mulo kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated
lug 11 09:12:29 mulo kernel: Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
lug 11 09:12:29 mulo kernel: Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
lug 11 09:12:29 mulo kernel: process: using mwait in idle threads
lug 11 09:12:29 mulo kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
lug 11 09:12:29 mulo kernel: Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit
lug 11 09:12:29 mulo kernel: Spectre V2 : Mitigation: Enhanced / Automatic IBRS
lug 11 09:12:29 mulo kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
lug 11 09:12:29 mulo kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
lug 11 09:12:29 mulo kernel: Register File Data Sampling: Mitigation: Clear Register File
lug 11 09:12:29 mulo kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
lug 11 09:12:29 mulo kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
lug 11 09:12:29 mulo kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
lug 11 09:12:29 mulo kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
lug 11 09:12:29 mulo kernel: x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
lug 11 09:12:29 mulo kernel: x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
lug 11 09:12:29 mulo kernel: x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
lug 11 09:12:29 mulo kernel: Freeing SMP alternatives memory: 40K
lug 11 09:12:29 mulo kernel: pid_max: default: 32768 minimum: 301
lug 11 09:12:29 mulo kernel: LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
lug 11 09:12:29 mulo kernel: landlock: Up and running.
lug 11 09:12:29 mulo kernel: Yama: becoming mindful.
lug 11 09:12:29 mulo kernel: LSM support for eBPF active
lug 11 09:12:29 mulo kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
lug 11 09:12:29 mulo kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
lug 11 09:12:29 mulo kernel: smpboot: CPU0: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz (family: 0x6, model: 0x7a, stepping: 0x8)
lug 11 09:12:29 mulo kernel: Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
lug 11 09:12:29 mulo kernel: ... version:                4
lug 11 09:12:29 mulo kernel: ... bit width:              48
lug 11 09:12:29 mulo kernel: ... generic registers:      4
lug 11 09:12:29 mulo kernel: ... value mask:             0000ffffffffffff
lug 11 09:12:29 mulo kernel: ... max period:             00007fffffffffff
lug 11 09:12:29 mulo kernel: ... fixed-purpose events:   3
lug 11 09:12:29 mulo kernel: ... event mask:             000000070000000f
lug 11 09:12:29 mulo kernel: signal: max sigframe size: 2032
lug 11 09:12:29 mulo kernel: Estimated ratio of average max frequency by base frequency (times 1024): 1638
lug 11 09:12:29 mulo kernel: rcu: Hierarchical SRCU implementation.
lug 11 09:12:29 mulo kernel: rcu:         Max phase no-delay instances is 1000.
lug 11 09:12:29 mulo kernel: Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
lug 11 09:12:29 mulo kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
lug 11 09:12:29 mulo kernel: smp: Bringing up secondary CPUs ...
lug 11 09:12:29 mulo kernel: smpboot: x86: Booting SMP configuration:
lug 11 09:12:29 mulo kernel: .... node  #0, CPUs:      #1 #2 #3
lug 11 09:12:29 mulo kernel: smp: Brought up 1 node, 4 CPUs
lug 11 09:12:29 mulo kernel: smpboot: Total of 4 processors activated (15980.00 BogoMIPS)
lug 11 09:12:29 mulo kernel: Memory: 7910736K/8220696K available (18432K kernel code, 2673K rwdata, 14352K rodata, 4288K init, 4272K bss, 297492K reserved, 0K cma-reserved)
lug 11 09:12:29 mulo kernel: devtmpfs: initialized
lug 11 09:12:29 mulo kernel: x86/mm: Memory block size: 128MB
lug 11 09:12:29 mulo kernel: ACPI: PM: Registering ACPI NVS region [mem 0x79cc2000-0x79d21fff] (393216 bytes)
lug 11 09:12:29 mulo kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
lug 11 09:12:29 mulo kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
lug 11 09:12:29 mulo kernel: pinctrl core: initialized pinctrl subsystem
lug 11 09:12:29 mulo kernel: PM: RTC time: 07:11:04, date: 2025-07-11
lug 11 09:12:29 mulo kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
lug 11 09:12:29 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
lug 11 09:12:29 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
lug 11 09:12:29 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
lug 11 09:12:29 mulo kernel: audit: initializing netlink subsys (disabled)
lug 11 09:12:29 mulo kernel: audit: type=2000 audit(1752217864.083:1): state=initialized audit_enabled=0 res=1
lug 11 09:12:29 mulo kernel: thermal_sys: Registered thermal governor 'fair_share'
lug 11 09:12:29 mulo kernel: thermal_sys: Registered thermal governor 'bang_bang'
lug 11 09:12:29 mulo kernel: thermal_sys: Registered thermal governor 'step_wise'
lug 11 09:12:29 mulo kernel: thermal_sys: Registered thermal governor 'user_space'
lug 11 09:12:29 mulo kernel: thermal_sys: Registered thermal governor 'power_allocator'
lug 11 09:12:29 mulo kernel: cpuidle: using governor ladder
lug 11 09:12:29 mulo kernel: cpuidle: using governor menu
lug 11 09:12:29 mulo kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
lug 11 09:12:29 mulo kernel: PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
lug 11 09:12:29 mulo kernel: PCI: Using configuration type 1 for base access
lug 11 09:12:29 mulo kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
lug 11 09:12:29 mulo kernel: HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
lug 11 09:12:29 mulo kernel: HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
lug 11 09:12:29 mulo kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
lug 11 09:12:29 mulo kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
lug 11 09:12:29 mulo kernel: ACPI: Added _OSI(Module Device)
lug 11 09:12:29 mulo kernel: ACPI: Added _OSI(Processor Device)
lug 11 09:12:29 mulo kernel: ACPI: Added _OSI(Processor Aggregator Device)
lug 11 09:12:29 mulo kernel: ACPI: 9 ACPI AML tables successfully acquired and loaded
lug 11 09:12:29 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 11 09:12:29 mulo kernel: ACPI: SSDT 0xFFFF8E7500F6E600 000190 (v02 PmRef  Cpu0Cst  00003001 INTL 20160930)
lug 11 09:12:29 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 11 09:12:29 mulo kernel: ACPI: SSDT 0xFFFF8E7500F6F200 0001E6 (v02 PmRef  ApIst    00003000 INTL 20160930)
lug 11 09:12:29 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 11 09:12:29 mulo kernel: ACPI: SSDT 0xFFFF8E7500E7EB00 0000C9 (v02 PmRef  ApCst    00003000 INTL 20160930)
lug 11 09:12:29 mulo kernel: ACPI: EC: EC started
lug 11 09:12:29 mulo kernel: ACPI: EC: interrupt blocked
lug 11 09:12:29 mulo kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
lug 11 09:12:29 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC used to handle transactions
lug 11 09:12:29 mulo kernel: ACPI: Interpreter enabled
lug 11 09:12:29 mulo kernel: ACPI: PM: (supports S0 S3 S4 S5)
lug 11 09:12:29 mulo kernel: ACPI: Using IOAPIC for interrupt routing
lug 11 09:12:29 mulo kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
lug 11 09:12:29 mulo kernel: PCI: Using E820 reservations for host bridge windows
lug 11 09:12:29 mulo kernel: ACPI: Enabled 1 GPEs in block 00 to 7F
lug 11 09:12:29 mulo kernel: ACPI: \_SB_.PCI0.RP01.PXSX.DRST: New power resource
lug 11 09:12:29 mulo kernel: ACPI: \_SB_.PCI0.RP02.PXSX.DRST: New power resource
lug 11 09:12:29 mulo kernel: ACPI: \_SB_.PCI0.RP03.PXSX.DRST: New power resource
lug 11 09:12:29 mulo kernel: ACPI: \_SB_.PCI0.RP04.PXSX.DRST: New power resource
lug 11 09:12:29 mulo kernel: ACPI: \_SB_.PCI0.RP05.PXSX.DRST: New power resource
lug 11 09:12:29 mulo kernel: ACPI: \_SB_.PCI0.RP06.PXSX.DRST: New power resource
lug 11 09:12:29 mulo kernel: ACPI: \_SB_.PCI0.CNVW.WRST: New power resource
lug 11 09:12:29 mulo kernel: ACPI: \_TZ_.FN00: New power resource
lug 11 09:12:29 mulo kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
lug 11 09:12:29 mulo kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
lug 11 09:12:29 mulo kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
lug 11 09:12:29 mulo kernel: PCI host bridge to bus 0000:00
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [mem 0x7c000001-0xcfffffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
lug 11 09:12:29 mulo kernel: pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000 conventional PCI endpoint
lug 11 09:12:29 mulo kernel: pci 0000:00:02.0: [8086:3184] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
lug 11 09:12:29 mulo kernel: pci 0000:00:02.0: BAR 0 [mem 0xa0000000-0xa0ffffff 64bit]
lug 11 09:12:29 mulo kernel: pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref]
lug 11 09:12:29 mulo kernel: pci 0000:00:02.0: BAR 4 [io  0xf000-0xf03f]
lug 11 09:12:29 mulo kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
lug 11 09:12:29 mulo kernel: pci 0000:00:0c.0: [8086:31dc] type 00 class 0x028000 PCIe Root Complex Integrated Endpoint
lug 11 09:12:29 mulo kernel: pci 0000:00:0c.0: BAR 0 [mem 0xa1314000-0xa1317fff 64bit]
lug 11 09:12:29 mulo kernel: pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
lug 11 09:12:29 mulo kernel: pci 0000:00:0e.0: [8086:3198] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
lug 11 09:12:29 mulo kernel: pci 0000:00:0e.0: BAR 0 [mem 0xa1310000-0xa1313fff 64bit]
lug 11 09:12:29 mulo kernel: pci 0000:00:0e.0: BAR 4 [mem 0xa1000000-0xa10fffff 64bit]
lug 11 09:12:29 mulo kernel: pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
lug 11 09:12:29 mulo kernel: pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000 conventional PCI endpoint
lug 11 09:12:29 mulo kernel: pci 0000:00:0f.0: BAR 0 [mem 0xa131f000-0xa131ffff 64bit]
lug 11 09:12:29 mulo kernel: pci 0000:00:0f.0: PME# supported from D3hot
lug 11 09:12:29 mulo kernel: pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601 conventional PCI endpoint
lug 11 09:12:29 mulo kernel: pci 0000:00:12.0: BAR 0 [mem 0xa1318000-0xa1319fff]
lug 11 09:12:29 mulo kernel: pci 0000:00:12.0: BAR 1 [mem 0xa131e000-0xa131e0ff]
lug 11 09:12:29 mulo kernel: pci 0000:00:12.0: BAR 2 [io  0xf090-0xf097]
lug 11 09:12:29 mulo kernel: pci 0000:00:12.0: BAR 3 [io  0xf080-0xf083]
lug 11 09:12:29 mulo kernel: pci 0000:00:12.0: BAR 4 [io  0xf060-0xf07f]
lug 11 09:12:29 mulo kernel: pci 0000:00:12.0: BAR 5 [mem 0xa131d000-0xa131d7ff]
lug 11 09:12:29 mulo kernel: pci 0000:00:12.0: PME# supported from D3hot
lug 11 09:12:29 mulo kernel: pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400 PCIe Root Port
lug 11 09:12:29 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 11 09:12:29 mulo kernel: pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
lug 11 09:12:29 mulo kernel: pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
lug 11 09:12:29 mulo kernel: pci 0000:00:13.2: [8086:31da] type 01 class 0x060400 PCIe Root Port
lug 11 09:12:29 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 11 09:12:29 mulo kernel: pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
lug 11 09:12:29 mulo kernel: pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
lug 11 09:12:29 mulo kernel: pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
lug 11 09:12:29 mulo kernel: pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330 conventional PCI endpoint
lug 11 09:12:29 mulo kernel: pci 0000:00:15.0: BAR 0 [mem 0xa1300000-0xa130ffff 64bit]
lug 11 09:12:29 mulo kernel: pci 0000:00:15.0: PME# supported from D3hot D3cold
lug 11 09:12:29 mulo kernel: pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501 conventional PCI endpoint
lug 11 09:12:29 mulo kernel: pci 0000:00:1c.0: BAR 0 [mem 0xa131c000-0xa131cfff 64bit]
lug 11 09:12:29 mulo kernel: pci 0000:00:1c.0: BAR 2 [mem 0xa131b000-0xa131bfff 64bit]
lug 11 09:12:29 mulo kernel: pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100 conventional PCI endpoint
lug 11 09:12:29 mulo kernel: pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500 conventional PCI endpoint
lug 11 09:12:29 mulo kernel: pci 0000:00:1f.1: BAR 0 [mem 0xa131a000-0xa131a0ff 64bit]
lug 11 09:12:29 mulo kernel: pci 0000:00:1f.1: BAR 4 [io  0xf040-0xf05f]
lug 11 09:12:29 mulo kernel: pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000 PCIe Endpoint
lug 11 09:12:29 mulo kernel: pci 0000:01:00.0: BAR 0 [mem 0xa1200000-0xa1200fff]
lug 11 09:12:29 mulo kernel: pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
lug 11 09:12:29 mulo kernel: pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
lug 11 09:12:29 mulo kernel: pci 0000:01:00.0: supports D1 D2
lug 11 09:12:29 mulo kernel: pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
lug 11 09:12:29 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 11 09:12:29 mulo kernel: pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
lug 11 09:12:29 mulo kernel: pci 0000:02:00.0: BAR 0 [io  0xe000-0xe0ff]
lug 11 09:12:29 mulo kernel: pci 0000:02:00.0: BAR 2 [mem 0xa1104000-0xa1104fff 64bit]
lug 11 09:12:29 mulo kernel: pci 0000:02:00.0: BAR 4 [mem 0xa1100000-0xa1103fff 64bit]
lug 11 09:12:29 mulo kernel: pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
lug 11 09:12:29 mulo kernel: pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128)
lug 11 09:12:29 mulo kernel: pci 0000:02:00.0: supports D1 D2
lug 11 09:12:29 mulo kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
lug 11 09:12:29 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 11 09:12:29 mulo kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 3
lug 11 09:12:29 mulo kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 4
lug 11 09:12:29 mulo kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 5
lug 11 09:12:29 mulo kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 6
lug 11 09:12:29 mulo kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 7
lug 11 09:12:29 mulo kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 9
lug 11 09:12:29 mulo kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 10
lug 11 09:12:29 mulo kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 11
lug 11 09:12:29 mulo kernel: ACPI: EC: interrupt unblocked
lug 11 09:12:29 mulo kernel: ACPI: EC: event unblocked
lug 11 09:12:29 mulo kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
lug 11 09:12:29 mulo kernel: ACPI: EC: GPE=0x22
lug 11 09:12:29 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC initialization complete
lug 11 09:12:29 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: EC: Used to handle transactions and events
lug 11 09:12:29 mulo kernel: iommu: Default domain type: Translated
lug 11 09:12:29 mulo kernel: iommu: DMA domain TLB invalidation policy: lazy mode
lug 11 09:12:29 mulo kernel: SCSI subsystem initialized
lug 11 09:12:29 mulo kernel: libata version 3.00 loaded.
lug 11 09:12:29 mulo kernel: ACPI: bus type USB registered
lug 11 09:12:29 mulo kernel: usbcore: registered new interface driver usbfs
lug 11 09:12:29 mulo kernel: usbcore: registered new interface driver hub
lug 11 09:12:29 mulo kernel: usbcore: registered new device driver usb
lug 11 09:12:29 mulo kernel: EDAC MC: Ver: 3.0.0
lug 11 09:12:29 mulo kernel: efivars: Registered efivars operations
lug 11 09:12:29 mulo kernel: NetLabel: Initializing
lug 11 09:12:29 mulo kernel: NetLabel:  domain hash size = 128
lug 11 09:12:29 mulo kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
lug 11 09:12:29 mulo kernel: NetLabel:  unlabeled traffic allowed by default
lug 11 09:12:29 mulo kernel: mctp: management component transport protocol core
lug 11 09:12:29 mulo kernel: NET: Registered PF_MCTP protocol family
lug 11 09:12:29 mulo kernel: PCI: Using ACPI for IRQ routing
lug 11 09:12:29 mulo kernel: PCI: pci_cache_line_size set to 64 bytes
lug 11 09:12:29 mulo kernel: resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00
lug 11 09:12:29 mulo kernel: e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
lug 11 09:12:29 mulo kernel: e820: reserve RAM buffer [mem 0x00059000-0x0005ffff]
lug 11 09:12:29 mulo kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
lug 11 09:12:29 mulo kernel: e820: reserve RAM buffer [mem 0x73d75000-0x73ffffff]
lug 11 09:12:29 mulo kernel: e820: reserve RAM buffer [mem 0x773d9000-0x77ffffff]
lug 11 09:12:29 mulo kernel: e820: reserve RAM buffer [mem 0x7a565000-0x7bffffff]
lug 11 09:12:29 mulo kernel: e820: reserve RAM buffer [mem 0x7ac00000-0x7bffffff]
lug 11 09:12:29 mulo kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device
lug 11 09:12:29 mulo kernel: pci 0000:00:02.0: vgaarb: bridge control possible
lug 11 09:12:29 mulo kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
lug 11 09:12:29 mulo kernel: vgaarb: loaded
lug 11 09:12:29 mulo kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
lug 11 09:12:29 mulo kernel: hpet0: 8 comparators, 64-bit 19.200000 MHz counter
lug 11 09:12:29 mulo kernel: clocksource: Switched to clocksource tsc-early
lug 11 09:12:29 mulo kernel: VFS: Disk quotas dquot_6.6.0
lug 11 09:12:29 mulo kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
lug 11 09:12:29 mulo kernel: pnp: PnP ACPI init
lug 11 09:12:29 mulo kernel: system 00:00: [io  0x0a00-0x0a1f] has been reserved
lug 11 09:12:29 mulo kernel: system 00:00: [io  0x0a20-0x0a2f] has been reserved
lug 11 09:12:29 mulo kernel: system 00:00: [io  0x0a30-0x0a3f] has been reserved
lug 11 09:12:29 mulo kernel: system 00:00: [io  0x0a40-0x0a4f] has been reserved
lug 11 09:12:29 mulo kernel: system 00:00: [io  0x0a50-0x0a5f] has been reserved
lug 11 09:12:29 mulo kernel: system 00:00: [io  0x0a60-0x0a6f] has been reserved
lug 11 09:12:29 mulo kernel: system 00:01: [io  0x0680-0x069f] has been reserved
lug 11 09:12:29 mulo kernel: system 00:01: [io  0x0400-0x047f] could not be reserved
lug 11 09:12:29 mulo kernel: system 00:01: [io  0x0500-0x05fe] has been reserved
lug 11 09:12:29 mulo kernel: system 00:01: [io  0x0600-0x061f] has been reserved
lug 11 09:12:29 mulo kernel: system 00:01: [io  0x164e-0x164f] has been reserved
lug 11 09:12:29 mulo kernel: system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
lug 11 09:12:29 mulo kernel: system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
lug 11 09:12:29 mulo kernel: system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
lug 11 09:12:29 mulo kernel: system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
lug 11 09:12:29 mulo kernel: system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
lug 11 09:12:29 mulo kernel: system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
lug 11 09:12:29 mulo kernel: system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
lug 11 09:12:29 mulo kernel: system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
lug 11 09:12:29 mulo kernel: system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
lug 11 09:12:29 mulo kernel: pnp: PnP ACPI: found 4 devices
lug 11 09:12:29 mulo kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
lug 11 09:12:29 mulo kernel: NET: Registered PF_INET protocol family
lug 11 09:12:29 mulo kernel: IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
lug 11 09:12:29 mulo kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
lug 11 09:12:29 mulo kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
lug 11 09:12:29 mulo kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
lug 11 09:12:29 mulo kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
lug 11 09:12:29 mulo kernel: TCP: Hash tables configured (established 65536 bind 65536)
lug 11 09:12:29 mulo kernel: MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
lug 11 09:12:29 mulo kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
lug 11 09:12:29 mulo kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
lug 11 09:12:29 mulo kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
lug 11 09:12:29 mulo kernel: NET: Registered PF_XDP protocol family
lug 11 09:12:29 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 11 09:12:29 mulo kernel: pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
lug 11 09:12:29 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 11 09:12:29 mulo kernel: pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
lug 11 09:12:29 mulo kernel: pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 9 [mem 0x7c000001-0xcfffffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 10 [mem 0xe0000000-0xefffffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 11 [mem 0xfea00000-0xfeafffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 12 [mem 0xfed00000-0xfed003ff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 13 [mem 0xfed01000-0xfed01fff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 14 [mem 0xfed03000-0xfed03fff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 15 [mem 0xfed06000-0xfed06fff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 16 [mem 0xfed08000-0xfed09fff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 17 [mem 0xfed80000-0xfedbffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 18 [mem 0xfed1c000-0xfed1cfff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:00: resource 19 [mem 0xfee00000-0xfeefffff window]
lug 11 09:12:29 mulo kernel: pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff]
lug 11 09:12:29 mulo kernel: pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
lug 11 09:12:29 mulo kernel: pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa11fffff]
lug 11 09:12:29 mulo kernel: PCI: CLS 64 bytes, default 64
lug 11 09:12:29 mulo kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
lug 11 09:12:29 mulo kernel: software IO TLB: mapped [mem 0x000000006ede3000-0x0000000072de3000] (64MB)
lug 11 09:12:29 mulo kernel: Trying to unpack rootfs image as initramfs...
lug 11 09:12:29 mulo kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
lug 11 09:12:29 mulo kernel: clocksource: Switched to clocksource tsc
lug 11 09:12:29 mulo kernel: Initialise system trusted keyrings
lug 11 09:12:29 mulo kernel: Key type blacklist registered
lug 11 09:12:29 mulo kernel: workingset: timestamp_bits=36 max_order=21 bucket_order=0
lug 11 09:12:29 mulo kernel: fuse: init (API version 7.41)
lug 11 09:12:29 mulo kernel: integrity: Platform Keyring initialized
lug 11 09:12:29 mulo kernel: integrity: Machine keyring initialized
lug 11 09:12:29 mulo kernel: Key type asymmetric registered
lug 11 09:12:29 mulo kernel: Asymmetric key parser 'x509' registered
lug 11 09:12:29 mulo kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
lug 11 09:12:29 mulo kernel: io scheduler mq-deadline registered
lug 11 09:12:29 mulo kernel: io scheduler kyber registered
lug 11 09:12:29 mulo kernel: io scheduler bfq registered
lug 11 09:12:29 mulo kernel: ledtrig-cpu: registered to indicate activity on CPUs
lug 11 09:12:29 mulo kernel: pcieport 0000:00:13.0: PME: Signaling with IRQ 120
lug 11 09:12:29 mulo kernel: pcieport 0000:00:13.2: PME: Signaling with IRQ 121
lug 11 09:12:29 mulo kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lug 11 09:12:29 mulo kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
lug 11 09:12:29 mulo kernel: ACPI: button: Power Button [PWRB]
lug 11 09:12:29 mulo kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
lug 11 09:12:29 mulo kernel: ACPI: button: Sleep Button [SLPB]
lug 11 09:12:29 mulo kernel: thermal LNXTHERM:00: registered as thermal_zone0
lug 11 09:12:29 mulo kernel: ACPI: thermal: Thermal Zone [TZ01] (46 C)
lug 11 09:12:29 mulo kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
lug 11 09:12:29 mulo kernel: Non-volatile memory driver v1.3
lug 11 09:12:29 mulo kernel: Linux agpgart interface v0.103
lug 11 09:12:29 mulo kernel: ACPI: bus type drm_connector registered
lug 11 09:12:29 mulo kernel: ahci 0000:00:12.0: version 3.0
lug 11 09:12:29 mulo kernel: ahci 0000:00:12.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
lug 11 09:12:29 mulo kernel: ahci 0000:00:12.0: 2/2 ports implemented (port mask 0x3)
lug 11 09:12:29 mulo kernel: ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst 
lug 11 09:12:29 mulo kernel: scsi host0: ahci
lug 11 09:12:29 mulo kernel: scsi host1: ahci
lug 11 09:12:29 mulo kernel: ata1: SATA max UDMA/133 abar m2048@0xa131d000 port 0xa131d100 irq 122 lpm-pol 3
lug 11 09:12:29 mulo kernel: ata2: SATA max UDMA/133 abar m2048@0xa131d000 port 0xa131d180 irq 122 lpm-pol 3
lug 11 09:12:29 mulo kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
lug 11 09:12:29 mulo kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
lug 11 09:12:29 mulo kernel: xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
lug 11 09:12:29 mulo kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
lug 11 09:12:29 mulo kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
lug 11 09:12:29 mulo kernel: xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
lug 11 09:12:29 mulo kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
lug 11 09:12:29 mulo kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
lug 11 09:12:29 mulo kernel: usb usb1: Product: xHCI Host Controller
lug 11 09:12:29 mulo kernel: usb usb1: Manufacturer: Linux 6.12.36-1-lts xhci-hcd
lug 11 09:12:29 mulo kernel: usb usb1: SerialNumber: 0000:00:15.0
lug 11 09:12:29 mulo kernel: hub 1-0:1.0: USB hub found
lug 11 09:12:29 mulo kernel: hub 1-0:1.0: 9 ports detected
lug 11 09:12:29 mulo kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
lug 11 09:12:29 mulo kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
lug 11 09:12:29 mulo kernel: usb usb2: Product: xHCI Host Controller
lug 11 09:12:29 mulo kernel: usb usb2: Manufacturer: Linux 6.12.36-1-lts xhci-hcd
lug 11 09:12:29 mulo kernel: usb usb2: SerialNumber: 0000:00:15.0
lug 11 09:12:29 mulo kernel: hub 2-0:1.0: USB hub found
lug 11 09:12:29 mulo kernel: hub 2-0:1.0: 7 ports detected
lug 11 09:12:29 mulo kernel: usbcore: registered new interface driver usbserial_generic
lug 11 09:12:29 mulo kernel: usbserial: USB Serial support registered for generic
lug 11 09:12:29 mulo kernel: rtc_cmos 00:03: RTC can wake from S4
lug 11 09:12:29 mulo kernel: rtc_cmos 00:03: registered as rtc0
lug 11 09:12:29 mulo kernel: rtc_cmos 00:03: setting system clock to 2025-07-11T07:11:04 UTC (1752217864)
lug 11 09:12:29 mulo kernel: rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
lug 11 09:12:29 mulo kernel: intel_pstate: Intel P-state driver initializing
lug 11 09:12:29 mulo kernel: simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
lug 11 09:12:29 mulo kernel: [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
lug 11 09:12:29 mulo kernel: fbcon: Deferring console take-over
lug 11 09:12:29 mulo kernel: simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
lug 11 09:12:29 mulo kernel: hid: raw HID events driver (C) Jiri Kosina
lug 11 09:12:29 mulo kernel: drop_monitor: Initializing network drop monitor service
lug 11 09:12:29 mulo kernel: NET: Registered PF_INET6 protocol family
lug 11 09:12:29 mulo kernel: Freeing initrd memory: 31692K
lug 11 09:12:29 mulo kernel: Segment Routing with IPv6
lug 11 09:12:29 mulo kernel: RPL Segment Routing with IPv6
lug 11 09:12:29 mulo kernel: In-situ OAM (IOAM) with IPv6
lug 11 09:12:29 mulo kernel: NET: Registered PF_PACKET protocol family
lug 11 09:12:29 mulo kernel: microcode: Current revision: 0x00000026
lug 11 09:12:29 mulo kernel: microcode: Updated early from: 0x0000001a
lug 11 09:12:29 mulo kernel: resctrl: L2 allocation detected
lug 11 09:12:29 mulo kernel: IPI shorthand broadcast: enabled
lug 11 09:12:29 mulo kernel: sched_clock: Marking stable (530972886, 4040292)->(537098408, -2085230)
lug 11 09:12:29 mulo kernel: registered taskstats version 1
lug 11 09:12:29 mulo kernel: Loading compiled-in X.509 certificates
lug 11 09:12:29 mulo kernel: Loaded X.509 cert 'Build time autogenerated kernel key: eee451ffdd9026577431c4c9a3bfa8216a157637'
lug 11 09:12:29 mulo kernel: zswap: loaded using pool zstd/zsmalloc
lug 11 09:12:29 mulo kernel: Demotion targets for Node 0: null
lug 11 09:12:29 mulo kernel: Key type .fscrypt registered
lug 11 09:12:29 mulo kernel: Key type fscrypt-provisioning registered
lug 11 09:12:29 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 11 09:12:29 mulo kernel: integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
lug 11 09:12:29 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 11 09:12:29 mulo kernel: integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
lug 11 09:12:29 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 11 09:12:29 mulo kernel: integrity: Loaded X.509 cert 'CISD FW Update - Certificate: 068268b4a41c93854262d49b4f788f13'
lug 11 09:12:29 mulo kernel: PM:   Magic number: 1:190:167
lug 11 09:12:29 mulo kernel: acpi device:30: hash matches
lug 11 09:12:29 mulo kernel: acpi PNP0000:00: hash matches
lug 11 09:12:29 mulo kernel: RAS: Correctable Errors collector initialized.
lug 11 09:12:29 mulo kernel: clk: Disabling unused clocks
lug 11 09:12:29 mulo kernel: PM: genpd: Disabling unused power domains
lug 11 09:12:29 mulo kernel: usb 1-2: new high-speed USB device number 2 using xhci_hcd
lug 11 09:12:29 mulo kernel: ata2: SATA link down (SStatus 4 SControl 300)
lug 11 09:12:29 mulo kernel: usb 1-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 0.03
lug 11 09:12:29 mulo kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 11 09:12:29 mulo kernel: usb 1-2: Product: USB2.1 Hub
lug 11 09:12:29 mulo kernel: usb 1-2: Manufacturer: Generic
lug 11 09:12:29 mulo kernel: hub 1-2:1.0: USB hub found
lug 11 09:12:29 mulo kernel: hub 1-2:1.0: 4 ports detected
lug 11 09:12:29 mulo kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
lug 11 09:12:29 mulo kernel: ata1.00: Model 'Samsung SSD 860 EVO 250GB', rev 'RVT01B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
lug 11 09:12:29 mulo kernel: ata1.00: supports DRM functions and may not be fully accessible
lug 11 09:12:29 mulo kernel: ata1.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
lug 11 09:12:29 mulo kernel: ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
lug 11 09:12:29 mulo kernel: ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
lug 11 09:12:29 mulo kernel: ata1.00: supports DRM functions and may not be fully accessible
lug 11 09:12:29 mulo kernel: ata1.00: configured for UDMA/133
lug 11 09:12:29 mulo kernel: ahci 0000:00:12.0: port does not support device sleep
lug 11 09:12:29 mulo kernel: scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
lug 11 09:12:29 mulo kernel: usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
lug 11 09:12:29 mulo kernel: ata1.00: Enabling discard_zeroes_data
lug 11 09:12:29 mulo kernel: sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
lug 11 09:12:29 mulo kernel: sd 0:0:0:0: [sda] Write Protect is off
lug 11 09:12:29 mulo kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
lug 11 09:12:29 mulo kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 09:12:29 mulo kernel: sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
lug 11 09:12:29 mulo kernel: ata1.00: Enabling discard_zeroes_data
lug 11 09:12:29 mulo kernel: usb 2-1: New USB device found, idVendor=152d, idProduct=0576, bcdDevice=41.01
lug 11 09:12:29 mulo kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
lug 11 09:12:29 mulo kernel: usb 2-1: Product: ANKEJE USB3.0
lug 11 09:12:29 mulo kernel: usb 2-1: Manufacturer: ANKEJE USB3.0
lug 11 09:12:29 mulo kernel: usb 2-1: SerialNumber: DD56419883014
lug 11 09:12:29 mulo kernel:  sda: sda1 sda2
lug 11 09:12:29 mulo kernel: sd 0:0:0:0: [sda] supports TCG Opal
lug 11 09:12:29 mulo kernel: sd 0:0:0:0: [sda] Attached SCSI disk
lug 11 09:12:29 mulo kernel: Freeing unused decrypted memory: 2028K
lug 11 09:12:29 mulo kernel: Freeing unused kernel image (initmem) memory: 4288K
lug 11 09:12:29 mulo kernel: Write protecting the kernel read-only data: 34816k
lug 11 09:12:29 mulo kernel: Freeing unused kernel image (rodata/data gap) memory: 2032K
lug 11 09:12:29 mulo kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
lug 11 09:12:29 mulo kernel: rodata_test: all tests were successful
lug 11 09:12:29 mulo kernel: Run /init as init process
lug 11 09:12:29 mulo kernel:   with arguments:
lug 11 09:12:29 mulo kernel:     /init
lug 11 09:12:29 mulo kernel:   with environment:
lug 11 09:12:29 mulo kernel:     HOME=/
lug 11 09:12:29 mulo kernel:     TERM=linux
lug 11 09:12:29 mulo kernel:     BOOT_IMAGE=/vmlinuz-linux-lts
lug 11 09:12:29 mulo kernel:     cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm
lug 11 09:12:29 mulo kernel: usb 1-9: new full-speed USB device number 3 using xhci_hcd
lug 11 09:12:29 mulo kernel: usb 1-9: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
lug 11 09:12:29 mulo kernel: usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
lug 11 09:12:29 mulo kernel: rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
lug 11 09:12:29 mulo kernel: cryptd: max_cpu_qlen set to 1000
lug 11 09:12:29 mulo kernel: sdhci: Secure Digital Host Controller Interface driver
lug 11 09:12:29 mulo kernel: sdhci: Copyright(c) Pierre Ossman
lug 11 09:12:29 mulo kernel: sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 6)
lug 11 09:12:29 mulo kernel: mmc0: CQHCI version 5.10
lug 11 09:12:29 mulo kernel: mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
lug 11 09:12:29 mulo kernel: usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
lug 11 09:12:29 mulo kernel: usb 2-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 0.03
lug 11 09:12:29 mulo kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 11 09:12:29 mulo kernel: usb 2-2: Product: USB3.2 Hub
lug 11 09:12:29 mulo kernel: usb 2-2: Manufacturer: Generic
lug 11 09:12:29 mulo kernel: hub 2-2:1.0: USB hub found
lug 11 09:12:29 mulo kernel: hub 2-2:1.0: 4 ports detected
lug 11 09:12:29 mulo kernel: usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
lug 11 09:12:29 mulo kernel: mmc0: Failed to initialize a non-removable card
lug 11 09:12:29 mulo kernel: usb 1-2.1: New USB device found, idVendor=1997, idProduct=2433, bcdDevice=20.12
lug 11 09:12:29 mulo kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 11 09:12:29 mulo kernel: usb 1-2.1: Product: Mini Keyboard
lug 11 09:12:29 mulo kernel: usb 1-2.1: Manufacturer:  
lug 11 09:12:29 mulo kernel: usbcore: registered new interface driver usbhid
lug 11 09:12:29 mulo kernel: usbhid: USB HID core driver
lug 11 09:12:29 mulo kernel: input:   Mini Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:1997:2433.0001/input/input2
lug 11 09:12:29 mulo kernel: usb 2-3: new SuperSpeed USB device number 4 using xhci_hcd
lug 11 09:12:29 mulo kernel: usb 2-3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 11 09:12:29 mulo kernel: usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 09:12:29 mulo kernel: usb 2-3: Product: Ugreen Storage Device
lug 11 09:12:29 mulo kernel: usb 2-3: Manufacturer: Ugreen
lug 11 09:12:29 mulo kernel: usb 2-3: SerialNumber: 022004019C85
lug 11 09:12:29 mulo kernel: hid-generic 0003:1997:2433.0001: input,hidraw0: USB HID v1.01 Keyboard [  Mini Keyboard] on usb-0000:00:15.0-2.1/input0
lug 11 09:12:29 mulo kernel: input:   Mini Keyboard Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input3
lug 11 09:12:29 mulo kernel: input:   Mini Keyboard System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input4
lug 11 09:12:29 mulo kernel: usb 2-2.2: new SuperSpeed USB device number 5 using xhci_hcd
lug 11 09:12:29 mulo kernel: input:   Mini Keyboard Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input5
lug 11 09:12:29 mulo kernel: hid-generic 0003:1997:2433.0002: input,hidraw1: USB HID v1.01 Mouse [  Mini Keyboard] on usb-0000:00:15.0-2.1/input1
lug 11 09:12:29 mulo kernel: usb 2-2.2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 11 09:12:29 mulo kernel: usb 2-2.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 09:12:29 mulo kernel: usb 2-2.2: Product: ASM105x
lug 11 09:12:29 mulo kernel: usb 2-2.2: Manufacturer: ASMT
lug 11 09:12:29 mulo kernel: usb 2-2.2: SerialNumber: 12345679818C
lug 11 09:12:29 mulo kernel: usb 2-4: new SuperSpeed USB device number 6 using xhci_hcd
lug 11 09:12:29 mulo kernel: usb 2-4: New USB device found, idVendor=1058, idProduct=1230, bcdDevice=10.50
lug 11 09:12:29 mulo kernel: usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 09:12:29 mulo kernel: usb 2-4: Product: My Book 1230
lug 11 09:12:29 mulo kernel: usb 2-4: Manufacturer: Western Digital
lug 11 09:12:29 mulo kernel: usb 2-4: SerialNumber: 574343344530393137333939
lug 11 09:12:29 mulo kernel: usb 2-1: UAS is ignored for this device, using usb-storage instead
lug 11 09:12:29 mulo kernel: usb-storage 2-1:1.0: USB Mass Storage device detected
lug 11 09:12:29 mulo kernel: usb-storage 2-1:1.0: Quirks match for vid 152d pid 0576: 800000
lug 11 09:12:29 mulo kernel: scsi host2: usb-storage 2-1:1.0
lug 11 09:12:29 mulo kernel: usb 2-3: UAS is ignored for this device, using usb-storage instead
lug 11 09:12:29 mulo kernel: usb-storage 2-3:1.0: USB Mass Storage device detected
lug 11 09:12:29 mulo kernel: usb-storage 2-3:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 11 09:12:29 mulo kernel: scsi host3: usb-storage 2-3:1.0
lug 11 09:12:29 mulo kernel: usb 2-2.2: UAS is ignored for this device, using usb-storage instead
lug 11 09:12:29 mulo kernel: usb-storage 2-2.2:1.0: USB Mass Storage device detected
lug 11 09:12:29 mulo kernel: usb-storage 2-2.2:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 11 09:12:29 mulo kernel: scsi host4: usb-storage 2-2.2:1.0
lug 11 09:12:29 mulo kernel: usb-storage 2-4:1.0: USB Mass Storage device detected
lug 11 09:12:29 mulo kernel: usb-storage 2-4:1.0: Quirks match for vid 1058 pid 1230: 800000
lug 11 09:12:29 mulo kernel: scsi host5: usb-storage 2-4:1.0
lug 11 09:12:29 mulo kernel: usbcore: registered new interface driver usb-storage
lug 11 09:12:29 mulo kernel: usbcore: registered new interface driver uas
lug 11 09:12:29 mulo kernel: device-mapper: uevent: version 1.0.3
lug 11 09:12:29 mulo kernel: device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
lug 11 09:12:29 mulo kernel: Key type encrypted registered
lug 11 09:12:29 mulo kernel: fbcon: Taking over console
lug 11 09:12:29 mulo kernel: Console: switching to colour frame buffer device 128x48
lug 11 09:12:29 mulo kernel: scsi 5:0:0:0: Direct-Access     WD       My Book 1230     1050 PQ: 0 ANSI: 6
lug 11 09:12:29 mulo kernel: scsi 4:0:0:0: Direct-Access     ASMT     ASM105x          0    PQ: 0 ANSI: 6
lug 11 09:12:29 mulo kernel: scsi 3:0:0:0: Direct-Access     TOSHIBA  MQ01ABD100       0    PQ: 0 ANSI: 6
lug 11 09:12:29 mulo kernel: scsi 2:0:0:0: Direct-Access     ANKEJE   USB3.0           4101 PQ: 0 ANSI: 6
lug 11 09:12:29 mulo kernel: scsi 5:0:0:1: Enclosure         WD       SES Device       1050 PQ: 0 ANSI: 6
lug 11 09:12:29 mulo kernel: sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 11 09:12:29 mulo kernel: sd 4:0:0:0: [sdc] 4096-byte physical blocks
lug 11 09:12:29 mulo kernel: sd 4:0:0:0: [sdc] Write Protect is off
lug 11 09:12:29 mulo kernel: sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
lug 11 09:12:29 mulo kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 09:12:29 mulo kernel: sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 11 09:12:29 mulo kernel: sd 3:0:0:0: [sdd] 4096-byte physical blocks
lug 11 09:12:29 mulo kernel: sd 5:0:0:0: [sdb] 976746240 4096-byte logical blocks: (4.00 TB/3.64 TiB)
lug 11 09:12:29 mulo kernel: sd 3:0:0:0: [sdd] Write Protect is off
lug 11 09:12:29 mulo kernel: sd 3:0:0:0: [sdd] Mode Sense: 43 00 00 00
lug 11 09:12:29 mulo kernel: sd 5:0:0:0: [sdb] Write Protect is off
lug 11 09:12:29 mulo kernel: sd 5:0:0:0: [sdb] Mode Sense: 53 00 10 08
lug 11 09:12:29 mulo kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 09:12:29 mulo kernel: sd 5:0:0:0: [sdb] No Caching mode page found
lug 11 09:12:29 mulo kernel: sd 5:0:0:0: [sdb] Assuming drive cache: write through
lug 11 09:12:29 mulo kernel: sd 2:0:0:0: [sde] 500118192 512-byte logical blocks: (256 GB/238 GiB)
lug 11 09:12:29 mulo kernel: sd 2:0:0:0: [sde] Write Protect is off
lug 11 09:12:29 mulo kernel: sd 2:0:0:0: [sde] Mode Sense: 47 00 00 08
lug 11 09:12:29 mulo kernel: sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 09:12:29 mulo kernel:  sdc: sdc1
lug 11 09:12:29 mulo kernel: sd 4:0:0:0: [sdc] Attached SCSI disk
lug 11 09:12:29 mulo kernel:  sdb: sdb1
lug 11 09:12:29 mulo kernel: sd 5:0:0:0: [sdb] Attached SCSI disk
lug 11 09:12:29 mulo kernel:  sde: sde1
lug 11 09:12:29 mulo kernel: sd 2:0:0:0: [sde] Attached SCSI disk
lug 11 09:12:29 mulo kernel:  sdd: sdd1
lug 11 09:12:29 mulo kernel: sd 3:0:0:0: [sdd] Attached SCSI disk
lug 11 09:12:29 mulo kernel: scsi 5:0:0:1: Failed to get diagnostic page 0x1
lug 11 09:12:29 mulo kernel: scsi 5:0:0:1: Failed to bind enclosure -19
lug 11 09:12:29 mulo kernel: ses 5:0:0:1: Attached Enclosure device
lug 11 09:12:29 mulo kernel: EXT4-fs (dm-1): mounted filesystem 16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12 r/w with ordered data mode. Quota mode: none.
lug 11 09:12:29 mulo systemd[1]: systemd 257.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
lug 11 09:12:29 mulo systemd[1]: Detected architecture x86-64.
lug 11 09:12:29 mulo systemd[1]: Hostname set to <mulo>.
lug 11 09:12:29 mulo systemd[1]: bpf-restrict-fs: LSM BPF program attached
lug 11 09:12:29 mulo systemd[1]: Queued start job for default target Graphical Interface.
lug 11 09:12:29 mulo systemd[1]: Created slice Slice /system/dirmngr.
lug 11 09:12:29 mulo systemd[1]: Created slice Slice /system/getty.
lug 11 09:12:29 mulo systemd[1]: Created slice Slice /system/gpg-agent.
lug 11 09:12:29 mulo systemd[1]: Created slice Slice /system/gpg-agent-browser.
lug 11 09:12:29 mulo systemd[1]: Created slice Slice /system/gpg-agent-extra.
lug 11 09:12:29 mulo systemd[1]: Created slice Slice /system/gpg-agent-ssh.
lug 11 09:12:29 mulo systemd[1]: Created slice Slice /system/keyboxd.
lug 11 09:12:29 mulo systemd[1]: Created slice Slice /system/modprobe.
lug 11 09:12:29 mulo systemd[1]: Created slice Encrypted Volume Units Service Slice.
lug 11 09:12:29 mulo systemd[1]: Created slice Slice /system/systemd-fsck.
lug 11 09:12:29 mulo systemd[1]: Created slice Slice /system/vncserver.
lug 11 09:12:29 mulo systemd[1]: Created slice User and Session Slice.
lug 11 09:12:29 mulo systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
lug 11 09:12:29 mulo systemd[1]: Started Forward Password Requests to Wall Directory Watch.
lug 11 09:12:29 mulo systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
lug 11 09:12:29 mulo systemd[1]: Expecting device /dev/disk/by-uuid/00d46560-89a9-4027-93d5-71fa2c8e247e...
lug 11 09:12:29 mulo systemd[1]: Expecting device /dev/disk/by-uuid/245c388e-dec5-4ba7-adf9-c4da95835a16...
lug 11 09:12:29 mulo systemd[1]: Expecting device /dev/disk/by-uuid/6401ad98-a5cf-4ccd-bc97-90d098f9368f...
lug 11 09:12:29 mulo systemd[1]: Expecting device /dev/disk/by-uuid/9f40d3cb-e5ce-4877-bf27-e57d966cd4a4...
lug 11 09:12:29 mulo systemd[1]: Expecting device /dev/disk/by-uuid/BD2A-C15F...
lug 11 09:12:29 mulo systemd[1]: Expecting device /dev/disk/by-uuid/a7818834-7865-407a-b44f-53fcb81be83d...
lug 11 09:12:29 mulo systemd[1]: Expecting device /dev/disk/by-uuid/c561c919-b617-492a-830c-74ababade132...
lug 11 09:12:29 mulo systemd[1]: Expecting device /dev/disk/by-uuid/d405b74f-f22e-4973-86de-a17460f2b1af...
lug 11 09:12:29 mulo systemd[1]: Expecting device /dev/disk/by-uuid/daa95dca-bdba-4e23-ac42-5e9cc33053bc...
lug 11 09:12:29 mulo systemd[1]: Expecting device /dev/disk/by-uuid/dad2d9f0-d032-4959-a92a-b15945b9867b...
lug 11 09:12:29 mulo systemd[1]: Expecting device /dev/disk/by-uuid/e10ab897-b1af-45c8-bb93-9a85d0561900...
lug 11 09:12:29 mulo systemd[1]: Reached target Local Encrypted Volumes.
lug 11 09:12:29 mulo systemd[1]: Reached target Login Prompts.
lug 11 09:12:29 mulo systemd[1]: Reached target Local Integrity Protected Volumes.
lug 11 09:12:29 mulo systemd[1]: Reached target Path Units.
lug 11 09:12:29 mulo systemd[1]: Reached target Remote File Systems.
lug 11 09:12:29 mulo systemd[1]: Reached target Slice Units.
lug 11 09:12:29 mulo systemd[1]: Reached target Swaps.
lug 11 09:12:29 mulo systemd[1]: Reached target Local Verity Protected Volumes.
lug 11 09:12:29 mulo systemd[1]: Listening on Device-mapper event daemon FIFOs.
lug 11 09:12:29 mulo systemd[1]: Listening on LVM2 poll daemon socket.
lug 11 09:12:29 mulo systemd[1]: Listening on Process Core Dump Socket.
lug 11 09:12:29 mulo systemd[1]: Listening on Credential Encryption/Decryption.
lug 11 09:12:29 mulo systemd[1]: Listening on Journal Socket (/dev/log).
lug 11 09:12:29 mulo systemd[1]: Listening on Journal Sockets.
lug 11 09:12:29 mulo systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 09:12:29 mulo systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 09:12:29 mulo systemd[1]: Listening on udev Control Socket.
lug 11 09:12:29 mulo systemd[1]: Listening on udev Kernel Socket.
lug 11 09:12:29 mulo systemd[1]: Mounting Huge Pages File System...
lug 11 09:12:29 mulo systemd[1]: Mounting POSIX Message Queue File System...
lug 11 09:12:29 mulo systemd[1]: Mounting Kernel Debug File System...
lug 11 09:12:29 mulo systemd[1]: Mounting Kernel Trace File System...
lug 11 09:12:29 mulo systemd[1]: Mounting Temporary Directory /tmp...
lug 11 09:12:29 mulo systemd[1]: Starting Create List of Static Device Nodes...
lug 11 09:12:29 mulo systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
lug 11 09:12:29 mulo systemd[1]: Starting Load Kernel Module configfs...
lug 11 09:12:29 mulo systemd[1]: Starting Load Kernel Module dm_mod...
lug 11 09:12:29 mulo systemd[1]: Starting Load Kernel Module drm...
lug 11 09:12:29 mulo systemd[1]: Starting Load Kernel Module fuse...
lug 11 09:12:29 mulo systemd[1]: Starting Load Kernel Module loop...
lug 11 09:12:29 mulo systemd[1]: Starting Mullvad early boot network blocker...
lug 11 09:12:29 mulo systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
lug 11 09:12:29 mulo systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
lug 11 09:12:29 mulo systemd[1]: Starting Journal Service...
lug 11 09:12:29 mulo systemd[1]: Starting Load Kernel Modules...
lug 11 09:12:29 mulo systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 09:12:29 mulo systemd[1]: Starting Remount Root and Kernel File Systems...
lug 11 09:12:29 mulo systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 09:12:29 mulo systemd[1]: Starting Load udev Rules from Credentials...
lug 11 09:12:29 mulo systemd[1]: Starting Coldplug All udev Devices...
lug 11 09:12:29 mulo systemd[1]: Mounted Huge Pages File System.
lug 11 09:12:29 mulo systemd[1]: Mounted POSIX Message Queue File System.
lug 11 09:12:29 mulo systemd[1]: Mounted Kernel Debug File System.
lug 11 09:12:29 mulo systemd[1]: Mounted Kernel Trace File System.
lug 11 09:12:29 mulo systemd[1]: Mounted Temporary Directory /tmp.
lug 11 09:12:29 mulo systemd[1]: Finished Create List of Static Device Nodes.
lug 11 09:12:29 mulo kernel: loop: module loaded
lug 11 09:12:29 mulo systemd[1]: modprobe@configfs.service: Deactivated successfully.
lug 11 09:12:29 mulo systemd[1]: Finished Load Kernel Module configfs.
lug 11 09:12:29 mulo systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
lug 11 09:12:29 mulo systemd[1]: Finished Load Kernel Module dm_mod.
lug 11 09:12:29 mulo systemd[1]: modprobe@drm.service: Deactivated successfully.
lug 11 09:12:29 mulo systemd[1]: Finished Load Kernel Module drm.
lug 11 09:12:29 mulo systemd[1]: modprobe@fuse.service: Deactivated successfully.
lug 11 09:12:29 mulo systemd[1]: Finished Load Kernel Module fuse.
lug 11 09:12:29 mulo systemd[1]: modprobe@loop.service: Deactivated successfully.
lug 11 09:12:29 mulo systemd[1]: Finished Load Kernel Module loop.
lug 11 09:12:29 mulo systemd[1]: Mounting FUSE Control File System...
lug 11 09:12:29 mulo systemd[1]: Mounting Kernel Configuration File System...
lug 11 09:12:29 mulo systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
lug 11 09:12:29 mulo systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
lug 11 09:12:29 mulo systemd[1]: Finished Load Kernel Modules.
lug 11 09:12:29 mulo systemd[1]: Starting Apply Kernel Variables...
lug 11 09:12:29 mulo systemd[1]: Mounted FUSE Control File System.
lug 11 09:12:29 mulo systemd[1]: Mounted Kernel Configuration File System.
lug 11 09:12:29 mulo kernel: EXT4-fs (dm-1): re-mounted 16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12.
lug 11 09:12:29 mulo systemd[1]: Finished Remount Root and Kernel File Systems.
lug 11 09:12:29 mulo systemd[1]: Finished Load udev Rules from Credentials.
lug 11 09:12:29 mulo systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
lug 11 09:12:29 mulo systemd[1]: Starting Load/Save OS Random Seed...
lug 11 09:12:29 mulo systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 09:12:29 mulo systemd-journald[389]: Collecting audit messages is disabled.
lug 11 09:12:29 mulo systemd[1]: Finished Apply Kernel Variables.
lug 11 09:12:29 mulo systemd[1]: Finished Load/Save OS Random Seed.
lug 11 09:12:29 mulo systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
lug 11 09:12:29 mulo systemd[1]: Create System Users was skipped because no trigger condition checks were met.
lug 11 09:12:29 mulo systemd[1]: Starting Network Name Resolution...
lug 11 09:12:29 mulo systemd[1]: Starting Network Time Synchronization...
lug 11 09:12:29 mulo systemd[1]: Starting Create Static Device Nodes in /dev...
lug 11 09:12:29 mulo systemd[1]: Started Journal Service.
lug 11 09:12:29 mulo systemd-journald[389]: Received client request to flush runtime journal.
lug 11 09:12:29 mulo kernel: mousedev: PS/2 mouse device common for all mice
lug 11 09:12:30 mulo kernel: lpc_ich 0000:00:1f.0: No MFD cells added
lug 11 09:12:30 mulo kernel: Bluetooth: Core ver 2.22
lug 11 09:12:30 mulo kernel: NET: Registered PF_BLUETOOTH protocol family
lug 11 09:12:30 mulo kernel: Bluetooth: HCI device and connection manager initialized
lug 11 09:12:30 mulo kernel: Bluetooth: HCI socket layer initialized
lug 11 09:12:30 mulo kernel: Bluetooth: L2CAP socket layer initialized
lug 11 09:12:30 mulo kernel: Bluetooth: SCO socket layer initialized
lug 11 09:12:30 mulo kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
lug 11 09:12:30 mulo kernel: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
lug 11 09:12:30 mulo kernel: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
lug 11 09:12:30 mulo kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
lug 11 09:12:30 mulo kernel: cfg80211: failed to load regulatory.db
lug 11 09:12:30 mulo kernel: input: PC Speaker as /devices/platform/pcspkr/input/input6
lug 11 09:12:30 mulo kernel: i801_smbus 0000:00:1f.1: SPD Write Disable is set
lug 11 09:12:30 mulo kernel: i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
lug 11 09:12:30 mulo kernel: Intel(R) Wireless WiFi driver for Linux
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: enabling device (0000 -> 0002)
lug 11 09:12:30 mulo kernel: i2c i2c-0: Successfully instantiated SPD at 0x50
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: Detected crf-id 0x2816, cnv-id 0x1000100 wfpm id 0x80000000
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: PCI dev 31dc/02a4, rev=0x312, rfid=0x108110
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: Detected Intel(R) Wireless-AC 9462
lug 11 09:12:30 mulo kernel: RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
lug 11 09:12:30 mulo kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
lug 11 09:12:30 mulo kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
lug 11 09:12:30 mulo kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
lug 11 09:12:30 mulo kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 0
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 1
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 2
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 3
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 4
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 6
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 8
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 9
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 10
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 11
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 15
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 16
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 18
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 19
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 20
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 21
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 28
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: loaded firmware version 46.7e3e4b69.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
lug 11 09:12:30 mulo kernel: pps_core: LinuxPPS API ver. 1 registered
lug 11 09:12:30 mulo kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
lug 11 09:12:30 mulo kernel: r8169 0000:02:00.0 eth0: RTL8168h/8111h, 1c:69:7a:af:b4:46, XID 541, IRQ 131
lug 11 09:12:30 mulo kernel: r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
lug 11 09:12:30 mulo kernel: PTP clock support registered
lug 11 09:12:30 mulo kernel: r8169 0000:02:00.0 eno1: renamed from eth0
lug 11 09:12:30 mulo kernel: ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0: base HW address: 6c:94:66:56:44:a1, OTP minor version: 0x4
lug 11 09:12:30 mulo kernel: usbcore: registered new interface driver btusb
lug 11 09:12:30 mulo kernel: Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
lug 11 09:12:30 mulo kernel: Bluetooth: hci0: Device revision is 2
lug 11 09:12:30 mulo kernel: Bluetooth: hci0: Secure boot is enabled
lug 11 09:12:30 mulo kernel: Bluetooth: hci0: OTP lock is enabled
lug 11 09:12:30 mulo kernel: Bluetooth: hci0: API lock is enabled
lug 11 09:12:30 mulo kernel: Bluetooth: hci0: Debug lock is disabled
lug 11 09:12:30 mulo kernel: Bluetooth: hci0: Minimum firmware build 1 week 10 2014
lug 11 09:12:30 mulo kernel: Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
lug 11 09:12:30 mulo kernel: Bluetooth: hci0: Boot Address: 0x40800
lug 11 09:12:30 mulo kernel: Bluetooth: hci0: Firmware Version: 201-12.24
lug 11 09:12:30 mulo kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
lug 11 09:12:30 mulo kernel: iwlwifi 0000:00:0c.0 wlo2: renamed from wlan0
lug 11 09:12:31 mulo kernel: intel_telemetry_core Init
lug 11 09:12:31 mulo kernel: i915 0000:00:02.0: [drm] Unknown revision 0x06
lug 11 09:12:31 mulo kernel: i915 0000:00:02.0: [drm] Found GEMINILAKE (device ID 3184) display version 10.00 stepping **
lug 11 09:12:31 mulo kernel: i915 0000:00:02.0: [drm] Unknown revid 0x06
lug 11 09:12:31 mulo kernel: Invalid pltconfig, ensure IPC1 device is enabled in BIOS
lug 11 09:12:31 mulo kernel: Console: switching to colour dummy device 80x25
lug 11 09:12:31 mulo kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
lug 11 09:12:31 mulo kernel: i915 0000:00:02.0: [drm] couldn't get memory information
lug 11 09:12:31 mulo kernel: i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
lug 11 09:12:31 mulo kernel: i915 0000:00:02.0: [drm] Applying Increase DDI Disabled quirk
lug 11 09:12:31 mulo kernel: i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
lug 11 09:12:31 mulo kernel: mei_hdcp 0000:00:0f.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
lug 11 09:12:31 mulo kernel: [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1
lug 11 09:12:31 mulo kernel: ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
lug 11 09:12:31 mulo kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
lug 11 09:12:31 mulo kernel: intel_rapl_common: Found RAPL domain package
lug 11 09:12:31 mulo kernel: intel_rapl_common: Found RAPL domain core
lug 11 09:12:31 mulo kernel: intel_rapl_common: Found RAPL domain uncore
lug 11 09:12:31 mulo kernel: intel_rapl_common: Found RAPL domain dram
lug 11 09:12:31 mulo kernel: i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
lug 11 09:12:31 mulo kernel: snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
lug 11 09:12:31 mulo kernel: i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
lug 11 09:12:31 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
lug 11 09:12:31 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
lug 11 09:12:31 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
lug 11 09:12:32 mulo kernel: Bluetooth: hci0: Waiting for firmware download to complete
lug 11 09:12:32 mulo kernel: Bluetooth: hci0: Firmware loaded in 1455856 usecs
lug 11 09:12:32 mulo kernel: Bluetooth: hci0: Waiting for device to boot
lug 11 09:12:32 mulo kernel: Bluetooth: hci0: Device booted in 13639 usecs
lug 11 09:12:32 mulo kernel: Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
lug 11 09:12:32 mulo kernel: Bluetooth: hci0: Applying Intel DDC parameters completed
lug 11 09:12:32 mulo kernel: Bluetooth: hci0: Firmware revision 0.1 build 201 week 12 2024
lug 11 09:12:32 mulo kernel: Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
lug 11 09:12:32 mulo kernel: EXT4-fs (dm-2): recovery complete
lug 11 09:12:32 mulo kernel: EXT4-fs (dm-2): mounted filesystem 245c388e-dec5-4ba7-adf9-c4da95835a16 r/w with ordered data mode. Quota mode: none.
lug 11 09:12:32 mulo kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
lug 11 09:12:32 mulo kernel: Bluetooth: BNEP filters: protocol multicast
lug 11 09:12:32 mulo kernel: Bluetooth: BNEP socket layer initialized
lug 11 09:12:32 mulo kernel: Bluetooth: MGMT ver 1.23
lug 11 09:12:32 mulo kernel: NET: Registered PF_ALG protocol family
lug 11 09:12:33 mulo kernel: Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
lug 11 09:12:33 mulo kernel: EXT4-fs (dm-3): warning: mounting fs with errors, running e2fsck is recommended
lug 11 09:12:33 mulo kernel: EXT4-fs (dm-3): mounted filesystem d405b74f-f22e-4973-86de-a17460f2b1af r/w with ordered data mode. Quota mode: none.
lug 11 09:12:33 mulo kernel: r8169 0000:02:00.0 eno1: Link is Down
lug 11 09:12:33 mulo kernel: iwlwifi 0000:00:0c.0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
lug 11 09:12:33 mulo kernel: iwlwifi 0000:00:0c.0: Registered PHC clock: iwlwifi-PTP, with index: 0
lug 11 09:12:33 mulo kernel: EXT4-fs (dm-4): recovery complete
lug 11 09:12:33 mulo kernel: EXT4-fs (dm-4): mounted filesystem 9f40d3cb-e5ce-4877-bf27-e57d966cd4a4 r/w with ordered data mode. Quota mode: none.
lug 11 09:12:33 mulo kernel: iwlwifi 0000:00:0c.0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
lug 11 09:12:34 mulo kernel: EXT4-fs (dm-5): mounted filesystem e10ab897-b1af-45c8-bb93-9a85d0561900 r/w with ordered data mode. Quota mode: none.
lug 11 09:12:35 mulo kernel: r8169 0000:02:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
lug 11 09:12:36 mulo kernel: Bluetooth: RFCOMM TTY layer initialized
lug 11 09:12:36 mulo kernel: Bluetooth: RFCOMM socket layer initialized
lug 11 09:12:36 mulo kernel: Bluetooth: RFCOMM ver 1.11
lug 11 09:12:37 mulo kernel: wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
lug 11 09:12:37 mulo kernel: wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
lug 11 09:13:04 mulo kernel: warning: `qbittorrent' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
lug 11 09:17:39 mulo kernel: EXT4-fs (dm-3): error count since last fsck: 3
lug 11 09:17:39 mulo kernel: EXT4-fs (dm-3): initial error at time 1564406226: ext4_journal_check_start:56
lug 11 09:17:39 mulo kernel: EXT4-fs (dm-3): last error at time 1736005403: __ext4_find_entry:1683: inode 36454401
lug 11 09:21:34 mulo kernel: usb 2-3: USB disconnect, device number 4
lug 11 09:21:34 mulo kernel: sd 3:0:0:0: [sdd] Synchronizing SCSI cache
lug 11 09:21:34 mulo kernel: sd 3:0:0:0: [sdd] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
lug 11 09:21:34 mulo kernel: EXT4-fs (dm-2): unmounting filesystem 245c388e-dec5-4ba7-adf9-c4da95835a16.
lug 11 09:21:34 mulo kernel: Buffer I/O error on dev dm-2, logical block 121667584, lost sync page write
lug 11 09:21:34 mulo kernel: JBD2: I/O error when updating journal superblock for dm-2-8.
lug 11 09:21:34 mulo kernel: Aborting journal on device dm-2-8.
lug 11 09:21:34 mulo kernel: Buffer I/O error on dev dm-2, logical block 121667584, lost sync page write
lug 11 09:21:34 mulo kernel: JBD2: I/O error when updating journal superblock for dm-2-8.
lug 11 09:21:34 mulo kernel: EXT4-fs error (device dm-2): ext4_put_super:1318: comm umount: Couldn't clean up the journal
lug 11 09:21:34 mulo kernel: Buffer I/O error on dev dm-2, logical block 0, lost sync page write
lug 11 09:21:34 mulo kernel: EXT4-fs (dm-2): I/O error while writing superblock
lug 11 09:21:34 mulo kernel: EXT4-fs (dm-2): Remounting filesystem read-only
lug 11 09:21:34 mulo kernel: Buffer I/O error on dev dm-2, logical block 0, lost sync page write
lug 11 09:21:34 mulo kernel: EXT4-fs (dm-2): I/O error while writing superblock
lug 11 09:21:34 mulo kernel: usb 2-3: new SuperSpeed USB device number 7 using xhci_hcd
lug 11 09:21:35 mulo kernel: usb 2-3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 11 09:21:35 mulo kernel: usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 09:21:35 mulo kernel: usb 2-3: Product: Ugreen Storage Device
lug 11 09:21:35 mulo kernel: usb 2-3: Manufacturer: Ugreen
lug 11 09:21:35 mulo kernel: usb 2-3: SerialNumber: 022004019C85
lug 11 09:21:35 mulo kernel: usb 2-3: UAS is ignored for this device, using usb-storage instead
lug 11 09:21:35 mulo kernel: usb-storage 2-3:1.0: USB Mass Storage device detected
lug 11 09:21:35 mulo kernel: usb-storage 2-3:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 11 09:21:35 mulo kernel: scsi host6: usb-storage 2-3:1.0
lug 11 09:21:36 mulo kernel: scsi 6:0:0:0: Direct-Access     TOSHIBA  MQ01ABD100       0    PQ: 0 ANSI: 6
lug 11 09:21:38 mulo kernel: sd 6:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 11 09:21:38 mulo kernel: sd 6:0:0:0: [sdd] 4096-byte physical blocks
lug 11 09:21:38 mulo kernel: sd 6:0:0:0: [sdd] Write Protect is off
lug 11 09:21:38 mulo kernel: sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00
lug 11 09:21:38 mulo kernel: sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 09:21:38 mulo kernel:  sdd: sdd1
lug 11 09:21:38 mulo kernel: sd 6:0:0:0: [sdd] Attached SCSI disk

I also thied this configuration:

ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="174c", ATTR{idProduct}=="55aa", ATTR{power/autosuspend}="-1"
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="1058", ATTR{idProduct}=="1230", ATTR{power/autosuspend}="-1"
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="152d", ATTR{idProduct}=="0576", ATTR{power/autosuspend}="-1"
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="0bda", ATTR{idProduct}=="0411", ATTR{power/autosuspend}="-1"
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="1d6b", ATTR{idProduct}=="0002", ATTR{power/autosuspend}="-1"
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="1d6b", ATTR{idProduct}=="0003", ATTR{power/autosuspend}="-1"

problem not solved, and it seems usb hub is still managed with autosuspend:

Device Path		Vendor:Product	Power		Description
1-2		0bda:5411	auto		Bus 001 Device 002: ID 0bda:5411 Realtek Semiconductor Corp. RTS5411 Hub
1-2.1		1997:2433	on		Bus 001 Device 004: ID 1997:2433 Shenzhen Riitek Technology Co., Ltd wireless mini keyboard with touchpad
1-9		8087:0aaa	auto		Bus 001 Device 003: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP)
2-1		152d:0576	on		Bus 002 Device 002: ID 152d:0576 JMicron Technology Corp. / JMicron USA Technology Corp. Gen1 SATA 6Gb/s Bridge
2-2		0bda:0411	auto		Bus 002 Device 003: ID 0bda:0411 Realtek Semiconductor Corp. Hub
2-2.2		174c:55aa	on		Bus 002 Device 004: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
2-3		174c:55aa	on		Bus 002 Device 004: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
2-4		1058:1230	on		Bus 002 Device 006: ID 1058:1230 Western Digital Technologies, Inc. My Book (WDBFJK)
usb1		1d6b:0002	auto		Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
usb2		1d6b:0003	auto		Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

I also tried to not use the usb hub and they disconnect (it's not an hardware problem)

Last edited by pepper (2025-07-11 08:23:35)

seth · 2025-07-11 08:23:06

"usbcore.autosuspend=-1", https://wiki.archlinux.org/title/Kernel_parameters
Do you use any power management daemon (TLP, laptop-mode-tools, etc. - though none shows up in your journal)?

What if you keep the disk busy?

while true; do sudo file -s /dev/sdd; sleep 5; done

might do for a test…

pepper · 2025-07-11 09:19:32

I disabled autosuspend via grub, I rebooted and the problem is showing again when I start writing in a disk, but it seems delayed from first minutes of boot.. it seems I need to write in the disk to trigger the problem, I'm not sure
cat /proc/cmdline

BOOT_IMAGE=/vmlinuz-linux-lts root=/dev/mapper/volgroup_0-lv_root rw cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm root=/dev/volgroup_0/lv_root loglevel=3 quiet usbcore.autosuspend=-1

Devices status:

Device Path		Vendor:Product	Power		Description
1-2		0bda:5411	auto		Bus 001 Device 002: ID 0bda:5411 Realtek Semiconductor Corp. RTS5411 Hub
1-2.1		1997:2433	on		Bus 001 Device 004: ID 1997:2433 Shenzhen Riitek Technology Co., Ltd wireless mini keyboard with touchpad
1-9		8087:0aaa	auto		Bus 001 Device 003: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP)
2-1		152d:0576	on		Bus 002 Device 002: ID 152d:0576 JMicron Technology Corp. / JMicron USA Technology Corp. Gen1 SATA 6Gb/s Bridge
2-2		0bda:0411	on		Bus 002 Device 003: ID 0bda:0411 Realtek Semiconductor Corp. Hub
2-2.2		174c:55aa	on		Bus 002 Device 004: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
2-3		174c:55aa	on		Bus 002 Device 004: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
2-4		1058:1230	on		Bus 002 Device 006: ID 1058:1230 Western Digital Technologies, Inc. My Book (WDBFJK)
usb1		1d6b:0002	auto		Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
usb2		1d6b:0003	auto		Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

journalctl -k -b

lug 11 10:47:12 mulo kernel: Linux version 6.12.36-1-lts (linux-lts@archlinux) (gcc (GCC) 15.1.1 20250425, GNU ld (GNU Binutils) 2.44.0) #1 SMP PREEMPT_DYNAMIC Sun, 06 Jul 2025 12:59:22 +0000
lug 11 10:47:12 mulo kernel: Command line: BOOT_IMAGE=/vmlinuz-linux-lts root=/dev/mapper/volgroup_0-lv_root rw cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm root=/dev/volgroup_0/lv_root loglevel=3 quiet usbcore.autosuspend=-1
lug 11 10:47:12 mulo kernel: BIOS-provided physical RAM map:
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x0000000000040000-0x0000000000058fff] usable
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x0000000000059000-0x0000000000059fff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x000000000005a000-0x000000000009dfff] usable
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x0000000012151000-0x00000000773d8fff] usable
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x00000000773d9000-0x0000000079c9dfff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x0000000079c9e000-0x0000000079cc1fff] ACPI data
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x0000000079cc2000-0x0000000079d21fff] ACPI NVS
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x0000000079d22000-0x000000007a0b6fff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x000000007a0b7000-0x000000007a170fff] type 20
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x000000007a171000-0x000000007a564fff] usable
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x000000007a565000-0x000000007a610fff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x000000007a611000-0x000000007abfffff] usable
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x000000007ac00000-0x000000007fffffff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
lug 11 10:47:12 mulo kernel: BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
lug 11 10:47:12 mulo kernel: NX (Execute Disable) protection: active
lug 11 10:47:12 mulo kernel: APIC: Static calls initialized
lug 11 10:47:12 mulo kernel: efi: EFI v2.7 by American Megatrends
lug 11 10:47:12 mulo kernel: efi: ACPI 2.0=0x79cae000 ACPI=0x79cae000 SMBIOS=0x79f6f000 SMBIOS 3.0=0x79f6e000 MEMATTR=0x72de3018 ESRT=0x79f4af18 
lug 11 10:47:12 mulo kernel: efi: Remove mem50: MMIO range=[0xd0000000-0xd0ffffff] (16MB) from e820 map
lug 11 10:47:12 mulo kernel: e820: remove [mem 0xd0000000-0xd0ffffff] reserved
lug 11 10:47:12 mulo kernel: efi: Not removing mem51: MMIO range=[0xd3709000-0xd3709fff] (4KB) from e820 map
lug 11 10:47:12 mulo kernel: efi: Remove mem52: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
lug 11 10:47:12 mulo kernel: e820: remove [mem 0xe0000000-0xefffffff] reserved
lug 11 10:47:12 mulo kernel: efi: Not removing mem53: MMIO range=[0xfe042000-0xfe042fff] (4KB) from e820 map
lug 11 10:47:12 mulo kernel: efi: Not removing mem54: MMIO range=[0xfe043000-0xfe043fff] (4KB) from e820 map
lug 11 10:47:12 mulo kernel: efi: Not removing mem55: MMIO range=[0xfe044000-0xfe044fff] (4KB) from e820 map
lug 11 10:47:12 mulo kernel: efi: Not removing mem56: MMIO range=[0xfe900000-0xfe902fff] (12KB) from e820 map
lug 11 10:47:12 mulo kernel: efi: Not removing mem57: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
lug 11 10:47:12 mulo kernel: efi: Not removing mem58: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map
lug 11 10:47:12 mulo kernel: efi: Not removing mem59: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
lug 11 10:47:12 mulo kernel: efi: Remove mem60: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
lug 11 10:47:12 mulo kernel: e820: remove [mem 0xff000000-0xffffffff] reserved
lug 11 10:47:12 mulo kernel: SMBIOS 3.2.0 present.
lug 11 10:47:12 mulo kernel: DMI: Intel(R) Client Systems NUC7PJYHN/NUC7JYB, BIOS JYGLKCPX.86A.0065.2021.0722.1137 07/22/2021
lug 11 10:47:12 mulo kernel: DMI: Memory slots populated: 2/2
lug 11 10:47:12 mulo kernel: tsc: Detected 1996.800 MHz processor
lug 11 10:47:12 mulo kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
lug 11 10:47:12 mulo kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
lug 11 10:47:12 mulo kernel: last_pfn = 0x280000 max_arch_pfn = 0x400000000
lug 11 10:47:12 mulo kernel: MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs
lug 11 10:47:12 mulo kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
lug 11 10:47:12 mulo kernel: last_pfn = 0x7ac00 max_arch_pfn = 0x400000000
lug 11 10:47:12 mulo kernel: esrt: Reserving ESRT space from 0x0000000079f4af18 to 0x0000000079f4af50.
lug 11 10:47:12 mulo kernel: Using GB pages for direct mapping
lug 11 10:47:12 mulo kernel: Secure boot disabled
lug 11 10:47:12 mulo kernel: RAMDISK: [mem 0x34209000-0x360fbfff]
lug 11 10:47:12 mulo kernel: ACPI: Early table checksum verification disabled
lug 11 10:47:12 mulo kernel: ACPI: RSDP 0x0000000079CAE000 000024 (v02 INTEL )
lug 11 10:47:12 mulo kernel: ACPI: XSDT 0x0000000079CAE0B0 0000D4 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 10:47:12 mulo kernel: ACPI: FACP 0x0000000079CBB630 000114 (v06 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 10:47:12 mulo kernel: ACPI: DSDT 0x0000000079CAE230 00D3FB (v02 INTEL  NUC7CJYB 01072009 INTL 20160930)
lug 11 10:47:12 mulo kernel: ACPI: FACS 0x0000000079D21080 000040
lug 11 10:47:12 mulo kernel: ACPI: FPDT 0x0000000079CBB750 000044 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 10:47:12 mulo kernel: ACPI: FIDT 0x0000000079CBB7A0 00009C (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 10:47:12 mulo kernel: ACPI: MCFG 0x0000000079CBB840 00003C (v01 INTEL  NUC7CJYB 01072009 MSFT 00000097)
lug 11 10:47:12 mulo kernel: ACPI: DBG2 0x0000000079CBB880 000072 (v00 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 10:47:12 mulo kernel: ACPI: DBGP 0x0000000079CBB900 000034 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 10:47:12 mulo kernel: ACPI: HPET 0x0000000079CBB940 000038 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 10:47:12 mulo kernel: ACPI: LPIT 0x0000000079CBB980 00005C (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 10:47:12 mulo kernel: ACPI: APIC 0x0000000079CBB9E0 000084 (v04 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 10:47:12 mulo kernel: ACPI: NPKT 0x0000000079CBBA70 000065 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 10:47:12 mulo kernel: ACPI: SSDT 0x0000000079CBBAE0 0010B3 (v02 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 10:47:12 mulo kernel: ACPI: SSDT 0x0000000079CBCBA0 0009FF (v01 INTEL  NUC7CJYB 00001000 INTL 20160930)
lug 11 10:47:12 mulo kernel: ACPI: SSDT 0x0000000079CBD5A0 0000B1 (v01 INTEL  NUC7CJYB 00001000 INTL 20160930)
lug 11 10:47:12 mulo kernel: ACPI: SSDT 0x0000000079CBD660 000661 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 10:47:12 mulo kernel: ACPI: SSDT 0x0000000079CBDCD0 000775 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 10:47:12 mulo kernel: ACPI: SSDT 0x0000000079CBE450 00035F (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 10:47:12 mulo kernel: ACPI: SSDT 0x0000000079CBE7B0 0001E6 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 10:47:12 mulo kernel: ACPI: SSDT 0x0000000079CBE9A0 00286F (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 10:47:12 mulo kernel: ACPI: BGRT 0x0000000079CC1210 000038 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 10:47:12 mulo kernel: ACPI: DMAR 0x0000000079CC1250 0000A8 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 10:47:12 mulo kernel: ACPI: WDAT 0x0000000079CC1300 000104 (v01 INTEL  NUC7CJYB 00000000      00000000)
lug 11 10:47:12 mulo kernel: ACPI: WSMT 0x0000000079CC1410 000028 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 10:47:12 mulo kernel: ACPI: Reserving FACP table memory at [mem 0x79cbb630-0x79cbb743]
lug 11 10:47:12 mulo kernel: ACPI: Reserving DSDT table memory at [mem 0x79cae230-0x79cbb62a]
lug 11 10:47:12 mulo kernel: ACPI: Reserving FACS table memory at [mem 0x79d21080-0x79d210bf]
lug 11 10:47:12 mulo kernel: ACPI: Reserving FPDT table memory at [mem 0x79cbb750-0x79cbb793]
lug 11 10:47:12 mulo kernel: ACPI: Reserving FIDT table memory at [mem 0x79cbb7a0-0x79cbb83b]
lug 11 10:47:12 mulo kernel: ACPI: Reserving MCFG table memory at [mem 0x79cbb840-0x79cbb87b]
lug 11 10:47:12 mulo kernel: ACPI: Reserving DBG2 table memory at [mem 0x79cbb880-0x79cbb8f1]
lug 11 10:47:12 mulo kernel: ACPI: Reserving DBGP table memory at [mem 0x79cbb900-0x79cbb933]
lug 11 10:47:12 mulo kernel: ACPI: Reserving HPET table memory at [mem 0x79cbb940-0x79cbb977]
lug 11 10:47:12 mulo kernel: ACPI: Reserving LPIT table memory at [mem 0x79cbb980-0x79cbb9db]
lug 11 10:47:12 mulo kernel: ACPI: Reserving APIC table memory at [mem 0x79cbb9e0-0x79cbba63]
lug 11 10:47:12 mulo kernel: ACPI: Reserving NPKT table memory at [mem 0x79cbba70-0x79cbbad4]
lug 11 10:47:12 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbbae0-0x79cbcb92]
lug 11 10:47:12 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbcba0-0x79cbd59e]
lug 11 10:47:12 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbd5a0-0x79cbd650]
lug 11 10:47:12 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbd660-0x79cbdcc0]
lug 11 10:47:12 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbdcd0-0x79cbe444]
lug 11 10:47:12 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe450-0x79cbe7ae]
lug 11 10:47:12 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe7b0-0x79cbe995]
lug 11 10:47:12 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe9a0-0x79cc120e]
lug 11 10:47:12 mulo kernel: ACPI: Reserving BGRT table memory at [mem 0x79cc1210-0x79cc1247]
lug 11 10:47:12 mulo kernel: ACPI: Reserving DMAR table memory at [mem 0x79cc1250-0x79cc12f7]
lug 11 10:47:12 mulo kernel: ACPI: Reserving WDAT table memory at [mem 0x79cc1300-0x79cc1403]
lug 11 10:47:12 mulo kernel: ACPI: Reserving WSMT table memory at [mem 0x79cc1410-0x79cc1437]
lug 11 10:47:12 mulo kernel: No NUMA configuration found
lug 11 10:47:12 mulo kernel: Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
lug 11 10:47:12 mulo kernel: NODE_DATA(0) allocated [mem 0x27ffd52c0-0x27fffffff]
lug 11 10:47:12 mulo kernel: Zone ranges:
lug 11 10:47:12 mulo kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
lug 11 10:47:12 mulo kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
lug 11 10:47:12 mulo kernel:   Normal   [mem 0x0000000100000000-0x000000027fffffff]
lug 11 10:47:12 mulo kernel:   Device   empty
lug 11 10:47:12 mulo kernel: Movable zone start for each node
lug 11 10:47:12 mulo kernel: Early memory node ranges
lug 11 10:47:12 mulo kernel:   node   0: [mem 0x0000000000001000-0x000000000003efff]
lug 11 10:47:12 mulo kernel:   node   0: [mem 0x0000000000040000-0x0000000000058fff]
lug 11 10:47:12 mulo kernel:   node   0: [mem 0x000000000005a000-0x000000000009dfff]
lug 11 10:47:12 mulo kernel:   node   0: [mem 0x0000000000100000-0x000000000fffffff]
lug 11 10:47:12 mulo kernel:   node   0: [mem 0x0000000012151000-0x00000000773d8fff]
lug 11 10:47:12 mulo kernel:   node   0: [mem 0x000000007a171000-0x000000007a564fff]
lug 11 10:47:12 mulo kernel:   node   0: [mem 0x000000007a611000-0x000000007abfffff]
lug 11 10:47:12 mulo kernel:   node   0: [mem 0x0000000100000000-0x000000027fffffff]
lug 11 10:47:12 mulo kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
lug 11 10:47:12 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 11 10:47:12 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 11 10:47:12 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 11 10:47:12 mulo kernel: On node 0, zone DMA: 98 pages in unavailable ranges
lug 11 10:47:12 mulo kernel: On node 0, zone DMA32: 8529 pages in unavailable ranges
lug 11 10:47:12 mulo kernel: On node 0, zone DMA32: 11672 pages in unavailable ranges
lug 11 10:47:12 mulo kernel: On node 0, zone DMA32: 172 pages in unavailable ranges
lug 11 10:47:12 mulo kernel: On node 0, zone Normal: 21504 pages in unavailable ranges
lug 11 10:47:12 mulo kernel: Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
lug 11 10:47:12 mulo kernel: ACPI: PM-Timer IO Port: 0x408
lug 11 10:47:12 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
lug 11 10:47:12 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
lug 11 10:47:12 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
lug 11 10:47:12 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
lug 11 10:47:12 mulo kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
lug 11 10:47:12 mulo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
lug 11 10:47:12 mulo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
lug 11 10:47:12 mulo kernel: ACPI: Using ACPI (MADT) for SMP configuration information
lug 11 10:47:12 mulo kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
lug 11 10:47:12 mulo kernel: e820: update [mem 0x73d75000-0x73e0efff] usable ==> reserved
lug 11 10:47:12 mulo kernel: TSC deadline timer available
lug 11 10:47:12 mulo kernel: CPU topo: Max. logical packages:   1
lug 11 10:47:12 mulo kernel: CPU topo: Max. logical dies:       1
lug 11 10:47:12 mulo kernel: CPU topo: Max. dies per package:   1
lug 11 10:47:12 mulo kernel: CPU topo: Max. threads per core:   1
lug 11 10:47:12 mulo kernel: CPU topo: Num. cores per package:     4
lug 11 10:47:12 mulo kernel: CPU topo: Num. threads per package:   4
lug 11 10:47:12 mulo kernel: CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
lug 11 10:47:12 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
lug 11 10:47:12 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
lug 11 10:47:12 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x00059000-0x00059fff]
lug 11 10:47:12 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
lug 11 10:47:12 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x10000000-0x12150fff]
lug 11 10:47:12 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x73d75000-0x73e0efff]
lug 11 10:47:12 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x773d9000-0x7a170fff]
lug 11 10:47:12 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x7a565000-0x7a610fff]
lug 11 10:47:12 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0xffffffff]
lug 11 10:47:12 mulo kernel: [mem 0x80000000-0xd3708fff] available for PCI devices
lug 11 10:47:12 mulo kernel: Booting paravirtualized kernel on bare hardware
lug 11 10:47:12 mulo kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
lug 11 10:47:12 mulo kernel: setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
lug 11 10:47:12 mulo kernel: percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u524288
lug 11 10:47:12 mulo kernel: pcpu-alloc: s237568 r8192 d28672 u524288 alloc=1*2097152
lug 11 10:47:12 mulo kernel: pcpu-alloc: [0] 0 1 2 3 
lug 11 10:47:12 mulo kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=/dev/mapper/volgroup_0-lv_root rw cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm root=/dev/volgroup_0/lv_root loglevel=3 quiet usbcore.autosuspend=-1
lug 11 10:47:12 mulo kernel: Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux-lts cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm", will be passed to user space.
lug 11 10:47:12 mulo kernel: random: crng init done
lug 11 10:47:12 mulo kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
lug 11 10:47:12 mulo kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
lug 11 10:47:12 mulo kernel: Fallback order for Node 0: 0 
lug 11 10:47:12 mulo kernel: Built 1 zonelists, mobility grouping on.  Total pages: 2055174
lug 11 10:47:12 mulo kernel: Policy zone: Normal
lug 11 10:47:12 mulo kernel: mem auto-init: stack:all(zero), heap alloc:on, heap free:off
lug 11 10:47:12 mulo kernel: software IO TLB: area num 4.
lug 11 10:47:12 mulo kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
lug 11 10:47:12 mulo kernel: ftrace: allocating 51450 entries in 201 pages
lug 11 10:47:12 mulo kernel: ftrace: allocated 201 pages with 4 groups
lug 11 10:47:12 mulo kernel: Dynamic Preempt: voluntary
lug 11 10:47:12 mulo kernel: rcu: Preemptible hierarchical RCU implementation.
lug 11 10:47:12 mulo kernel: rcu:         RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
lug 11 10:47:12 mulo kernel: rcu:         RCU priority boosting: priority 1 delay 500 ms.
lug 11 10:47:12 mulo kernel:         Trampoline variant of Tasks RCU enabled.
lug 11 10:47:12 mulo kernel:         Rude variant of Tasks RCU enabled.
lug 11 10:47:12 mulo kernel:         Tracing variant of Tasks RCU enabled.
lug 11 10:47:12 mulo kernel: rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
lug 11 10:47:12 mulo kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
lug 11 10:47:12 mulo kernel: RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 11 10:47:12 mulo kernel: RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 11 10:47:12 mulo kernel: RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 11 10:47:12 mulo kernel: NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
lug 11 10:47:12 mulo kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention.
lug 11 10:47:12 mulo kernel: kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
lug 11 10:47:12 mulo kernel: Console: colour dummy device 80x25
lug 11 10:47:12 mulo kernel: printk: legacy console [tty0] enabled
lug 11 10:47:12 mulo kernel: ACPI: Core revision 20240827
lug 11 10:47:12 mulo kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
lug 11 10:47:12 mulo kernel: APIC: Switch to symmetric I/O mode setup
lug 11 10:47:12 mulo kernel: DMAR: Host address width 39
lug 11 10:47:12 mulo kernel: DMAR: DRHD base: 0x000000fed64000 flags: 0x0
lug 11 10:47:12 mulo kernel: DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
lug 11 10:47:12 mulo kernel: DMAR: DRHD base: 0x000000fed65000 flags: 0x1
lug 11 10:47:12 mulo kernel: DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
lug 11 10:47:12 mulo kernel: DMAR: RMRR base: 0x00000079c3c000 end: 0x00000079c5bfff
lug 11 10:47:12 mulo kernel: DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
lug 11 10:47:12 mulo kernel: DMAR-IR: IOAPIC id 1 under DRHD base  0xfed65000 IOMMU 1
lug 11 10:47:12 mulo kernel: DMAR-IR: HPET id 0 under DRHD base 0xfed65000
lug 11 10:47:12 mulo kernel: DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
lug 11 10:47:12 mulo kernel: DMAR-IR: Enabled IRQ remapping in x2apic mode
lug 11 10:47:12 mulo kernel: x2apic enabled
lug 11 10:47:12 mulo kernel: APIC: Switched APIC routing to: cluster x2apic
lug 11 10:47:12 mulo kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
lug 11 10:47:12 mulo kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
lug 11 10:47:12 mulo kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3995.00 BogoMIPS (lpj=6656000)
lug 11 10:47:12 mulo kernel: x86/cpu: SGX disabled or unsupported by BIOS.
lug 11 10:47:12 mulo kernel: CPU0: Thermal monitoring enabled (TM1)
lug 11 10:47:12 mulo kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated
lug 11 10:47:12 mulo kernel: Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
lug 11 10:47:12 mulo kernel: Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
lug 11 10:47:12 mulo kernel: process: using mwait in idle threads
lug 11 10:47:12 mulo kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
lug 11 10:47:12 mulo kernel: Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit
lug 11 10:47:12 mulo kernel: Spectre V2 : Mitigation: Enhanced / Automatic IBRS
lug 11 10:47:12 mulo kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
lug 11 10:47:12 mulo kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
lug 11 10:47:12 mulo kernel: Register File Data Sampling: Mitigation: Clear Register File
lug 11 10:47:12 mulo kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
lug 11 10:47:12 mulo kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
lug 11 10:47:12 mulo kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
lug 11 10:47:12 mulo kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
lug 11 10:47:12 mulo kernel: x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
lug 11 10:47:12 mulo kernel: x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
lug 11 10:47:12 mulo kernel: x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
lug 11 10:47:12 mulo kernel: Freeing SMP alternatives memory: 40K
lug 11 10:47:12 mulo kernel: pid_max: default: 32768 minimum: 301
lug 11 10:47:12 mulo kernel: LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
lug 11 10:47:12 mulo kernel: landlock: Up and running.
lug 11 10:47:12 mulo kernel: Yama: becoming mindful.
lug 11 10:47:12 mulo kernel: LSM support for eBPF active
lug 11 10:47:12 mulo kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
lug 11 10:47:12 mulo kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
lug 11 10:47:12 mulo kernel: smpboot: CPU0: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz (family: 0x6, model: 0x7a, stepping: 0x8)
lug 11 10:47:12 mulo kernel: Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
lug 11 10:47:12 mulo kernel: ... version:                4
lug 11 10:47:12 mulo kernel: ... bit width:              48
lug 11 10:47:12 mulo kernel: ... generic registers:      4
lug 11 10:47:12 mulo kernel: ... value mask:             0000ffffffffffff
lug 11 10:47:12 mulo kernel: ... max period:             00007fffffffffff
lug 11 10:47:12 mulo kernel: ... fixed-purpose events:   3
lug 11 10:47:12 mulo kernel: ... event mask:             000000070000000f
lug 11 10:47:12 mulo kernel: signal: max sigframe size: 2032
lug 11 10:47:12 mulo kernel: Estimated ratio of average max frequency by base frequency (times 1024): 1638
lug 11 10:47:12 mulo kernel: rcu: Hierarchical SRCU implementation.
lug 11 10:47:12 mulo kernel: rcu:         Max phase no-delay instances is 1000.
lug 11 10:47:12 mulo kernel: Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
lug 11 10:47:12 mulo kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
lug 11 10:47:12 mulo kernel: smp: Bringing up secondary CPUs ...
lug 11 10:47:12 mulo kernel: smpboot: x86: Booting SMP configuration:
lug 11 10:47:12 mulo kernel: .... node  #0, CPUs:      #1 #2 #3
lug 11 10:47:12 mulo kernel: smp: Brought up 1 node, 4 CPUs
lug 11 10:47:12 mulo kernel: smpboot: Total of 4 processors activated (15980.00 BogoMIPS)
lug 11 10:47:12 mulo kernel: Memory: 7910736K/8220696K available (18432K kernel code, 2673K rwdata, 14352K rodata, 4288K init, 4272K bss, 297496K reserved, 0K cma-reserved)
lug 11 10:47:12 mulo kernel: devtmpfs: initialized
lug 11 10:47:12 mulo kernel: x86/mm: Memory block size: 128MB
lug 11 10:47:12 mulo kernel: ACPI: PM: Registering ACPI NVS region [mem 0x79cc2000-0x79d21fff] (393216 bytes)
lug 11 10:47:12 mulo kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
lug 11 10:47:12 mulo kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
lug 11 10:47:12 mulo kernel: pinctrl core: initialized pinctrl subsystem
lug 11 10:47:12 mulo kernel: PM: RTC time: 08:46:29, date: 2025-07-11
lug 11 10:47:12 mulo kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
lug 11 10:47:12 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
lug 11 10:47:12 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
lug 11 10:47:12 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
lug 11 10:47:12 mulo kernel: audit: initializing netlink subsys (disabled)
lug 11 10:47:12 mulo kernel: audit: type=2000 audit(1752223589.083:1): state=initialized audit_enabled=0 res=1
lug 11 10:47:12 mulo kernel: thermal_sys: Registered thermal governor 'fair_share'
lug 11 10:47:12 mulo kernel: thermal_sys: Registered thermal governor 'bang_bang'
lug 11 10:47:12 mulo kernel: thermal_sys: Registered thermal governor 'step_wise'
lug 11 10:47:12 mulo kernel: thermal_sys: Registered thermal governor 'user_space'
lug 11 10:47:12 mulo kernel: thermal_sys: Registered thermal governor 'power_allocator'
lug 11 10:47:12 mulo kernel: cpuidle: using governor ladder
lug 11 10:47:12 mulo kernel: cpuidle: using governor menu
lug 11 10:47:12 mulo kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
lug 11 10:47:12 mulo kernel: PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
lug 11 10:47:12 mulo kernel: PCI: Using configuration type 1 for base access
lug 11 10:47:12 mulo kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
lug 11 10:47:12 mulo kernel: HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
lug 11 10:47:12 mulo kernel: HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
lug 11 10:47:12 mulo kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
lug 11 10:47:12 mulo kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
lug 11 10:47:12 mulo kernel: ACPI: Added _OSI(Module Device)
lug 11 10:47:12 mulo kernel: ACPI: Added _OSI(Processor Device)
lug 11 10:47:12 mulo kernel: ACPI: Added _OSI(Processor Aggregator Device)
lug 11 10:47:12 mulo kernel: ACPI: 9 ACPI AML tables successfully acquired and loaded
lug 11 10:47:12 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 11 10:47:12 mulo kernel: ACPI: SSDT 0xFFFF8C03011F7000 000190 (v02 PmRef  Cpu0Cst  00003001 INTL 20160930)
lug 11 10:47:12 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 11 10:47:12 mulo kernel: ACPI: SSDT 0xFFFF8C03011F7C00 0001E6 (v02 PmRef  ApIst    00003000 INTL 20160930)
lug 11 10:47:12 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 11 10:47:12 mulo kernel: ACPI: SSDT 0xFFFF8C0300EF4700 0000C9 (v02 PmRef  ApCst    00003000 INTL 20160930)
lug 11 10:47:12 mulo kernel: ACPI: EC: EC started
lug 11 10:47:12 mulo kernel: ACPI: EC: interrupt blocked
lug 11 10:47:12 mulo kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
lug 11 10:47:12 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC used to handle transactions
lug 11 10:47:12 mulo kernel: ACPI: Interpreter enabled
lug 11 10:47:12 mulo kernel: ACPI: PM: (supports S0 S3 S4 S5)
lug 11 10:47:12 mulo kernel: ACPI: Using IOAPIC for interrupt routing
lug 11 10:47:12 mulo kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
lug 11 10:47:12 mulo kernel: PCI: Using E820 reservations for host bridge windows
lug 11 10:47:12 mulo kernel: ACPI: Enabled 1 GPEs in block 00 to 7F
lug 11 10:47:12 mulo kernel: ACPI: \_SB_.PCI0.RP01.PXSX.DRST: New power resource
lug 11 10:47:12 mulo kernel: ACPI: \_SB_.PCI0.RP02.PXSX.DRST: New power resource
lug 11 10:47:12 mulo kernel: ACPI: \_SB_.PCI0.RP03.PXSX.DRST: New power resource
lug 11 10:47:12 mulo kernel: ACPI: \_SB_.PCI0.RP04.PXSX.DRST: New power resource
lug 11 10:47:12 mulo kernel: ACPI: \_SB_.PCI0.RP05.PXSX.DRST: New power resource
lug 11 10:47:12 mulo kernel: ACPI: \_SB_.PCI0.RP06.PXSX.DRST: New power resource
lug 11 10:47:12 mulo kernel: ACPI: \_SB_.PCI0.CNVW.WRST: New power resource
lug 11 10:47:12 mulo kernel: ACPI: \_TZ_.FN00: New power resource
lug 11 10:47:12 mulo kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
lug 11 10:47:12 mulo kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
lug 11 10:47:12 mulo kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
lug 11 10:47:12 mulo kernel: PCI host bridge to bus 0000:00
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [mem 0x7c000001-0xcfffffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
lug 11 10:47:12 mulo kernel: pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000 conventional PCI endpoint
lug 11 10:47:12 mulo kernel: pci 0000:00:02.0: [8086:3184] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
lug 11 10:47:12 mulo kernel: pci 0000:00:02.0: BAR 0 [mem 0xa0000000-0xa0ffffff 64bit]
lug 11 10:47:12 mulo kernel: pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref]
lug 11 10:47:12 mulo kernel: pci 0000:00:02.0: BAR 4 [io  0xf000-0xf03f]
lug 11 10:47:12 mulo kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
lug 11 10:47:12 mulo kernel: pci 0000:00:0c.0: [8086:31dc] type 00 class 0x028000 PCIe Root Complex Integrated Endpoint
lug 11 10:47:12 mulo kernel: pci 0000:00:0c.0: BAR 0 [mem 0xa1314000-0xa1317fff 64bit]
lug 11 10:47:12 mulo kernel: pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
lug 11 10:47:12 mulo kernel: pci 0000:00:0e.0: [8086:3198] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
lug 11 10:47:12 mulo kernel: pci 0000:00:0e.0: BAR 0 [mem 0xa1310000-0xa1313fff 64bit]
lug 11 10:47:12 mulo kernel: pci 0000:00:0e.0: BAR 4 [mem 0xa1000000-0xa10fffff 64bit]
lug 11 10:47:12 mulo kernel: pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
lug 11 10:47:12 mulo kernel: pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000 conventional PCI endpoint
lug 11 10:47:12 mulo kernel: pci 0000:00:0f.0: BAR 0 [mem 0xa131f000-0xa131ffff 64bit]
lug 11 10:47:12 mulo kernel: pci 0000:00:0f.0: PME# supported from D3hot
lug 11 10:47:12 mulo kernel: pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601 conventional PCI endpoint
lug 11 10:47:12 mulo kernel: pci 0000:00:12.0: BAR 0 [mem 0xa1318000-0xa1319fff]
lug 11 10:47:12 mulo kernel: pci 0000:00:12.0: BAR 1 [mem 0xa131e000-0xa131e0ff]
lug 11 10:47:12 mulo kernel: pci 0000:00:12.0: BAR 2 [io  0xf090-0xf097]
lug 11 10:47:12 mulo kernel: pci 0000:00:12.0: BAR 3 [io  0xf080-0xf083]
lug 11 10:47:12 mulo kernel: pci 0000:00:12.0: BAR 4 [io  0xf060-0xf07f]
lug 11 10:47:12 mulo kernel: pci 0000:00:12.0: BAR 5 [mem 0xa131d000-0xa131d7ff]
lug 11 10:47:12 mulo kernel: pci 0000:00:12.0: PME# supported from D3hot
lug 11 10:47:12 mulo kernel: pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400 PCIe Root Port
lug 11 10:47:12 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 11 10:47:12 mulo kernel: pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
lug 11 10:47:12 mulo kernel: pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
lug 11 10:47:12 mulo kernel: pci 0000:00:13.2: [8086:31da] type 01 class 0x060400 PCIe Root Port
lug 11 10:47:12 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 11 10:47:12 mulo kernel: pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
lug 11 10:47:12 mulo kernel: pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
lug 11 10:47:12 mulo kernel: pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
lug 11 10:47:12 mulo kernel: pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330 conventional PCI endpoint
lug 11 10:47:12 mulo kernel: pci 0000:00:15.0: BAR 0 [mem 0xa1300000-0xa130ffff 64bit]
lug 11 10:47:12 mulo kernel: pci 0000:00:15.0: PME# supported from D3hot D3cold
lug 11 10:47:12 mulo kernel: pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501 conventional PCI endpoint
lug 11 10:47:12 mulo kernel: pci 0000:00:1c.0: BAR 0 [mem 0xa131c000-0xa131cfff 64bit]
lug 11 10:47:12 mulo kernel: pci 0000:00:1c.0: BAR 2 [mem 0xa131b000-0xa131bfff 64bit]
lug 11 10:47:12 mulo kernel: pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100 conventional PCI endpoint
lug 11 10:47:12 mulo kernel: pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500 conventional PCI endpoint
lug 11 10:47:12 mulo kernel: pci 0000:00:1f.1: BAR 0 [mem 0xa131a000-0xa131a0ff 64bit]
lug 11 10:47:12 mulo kernel: pci 0000:00:1f.1: BAR 4 [io  0xf040-0xf05f]
lug 11 10:47:12 mulo kernel: pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000 PCIe Endpoint
lug 11 10:47:12 mulo kernel: pci 0000:01:00.0: BAR 0 [mem 0xa1200000-0xa1200fff]
lug 11 10:47:12 mulo kernel: pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
lug 11 10:47:12 mulo kernel: pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
lug 11 10:47:12 mulo kernel: pci 0000:01:00.0: supports D1 D2
lug 11 10:47:12 mulo kernel: pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
lug 11 10:47:12 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 11 10:47:12 mulo kernel: pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
lug 11 10:47:12 mulo kernel: pci 0000:02:00.0: BAR 0 [io  0xe000-0xe0ff]
lug 11 10:47:12 mulo kernel: pci 0000:02:00.0: BAR 2 [mem 0xa1104000-0xa1104fff 64bit]
lug 11 10:47:12 mulo kernel: pci 0000:02:00.0: BAR 4 [mem 0xa1100000-0xa1103fff 64bit]
lug 11 10:47:12 mulo kernel: pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
lug 11 10:47:12 mulo kernel: pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128)
lug 11 10:47:12 mulo kernel: pci 0000:02:00.0: supports D1 D2
lug 11 10:47:12 mulo kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
lug 11 10:47:12 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 11 10:47:12 mulo kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 3
lug 11 10:47:12 mulo kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 4
lug 11 10:47:12 mulo kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 5
lug 11 10:47:12 mulo kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 6
lug 11 10:47:12 mulo kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 7
lug 11 10:47:12 mulo kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 9
lug 11 10:47:12 mulo kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 10
lug 11 10:47:12 mulo kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 11
lug 11 10:47:12 mulo kernel: ACPI: EC: interrupt unblocked
lug 11 10:47:12 mulo kernel: ACPI: EC: event unblocked
lug 11 10:47:12 mulo kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
lug 11 10:47:12 mulo kernel: ACPI: EC: GPE=0x22
lug 11 10:47:12 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC initialization complete
lug 11 10:47:12 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: EC: Used to handle transactions and events
lug 11 10:47:12 mulo kernel: iommu: Default domain type: Translated
lug 11 10:47:12 mulo kernel: iommu: DMA domain TLB invalidation policy: lazy mode
lug 11 10:47:12 mulo kernel: SCSI subsystem initialized
lug 11 10:47:12 mulo kernel: libata version 3.00 loaded.
lug 11 10:47:12 mulo kernel: ACPI: bus type USB registered
lug 11 10:47:12 mulo kernel: usbcore: registered new interface driver usbfs
lug 11 10:47:12 mulo kernel: usbcore: registered new interface driver hub
lug 11 10:47:12 mulo kernel: usbcore: registered new device driver usb
lug 11 10:47:12 mulo kernel: EDAC MC: Ver: 3.0.0
lug 11 10:47:12 mulo kernel: efivars: Registered efivars operations
lug 11 10:47:12 mulo kernel: NetLabel: Initializing
lug 11 10:47:12 mulo kernel: NetLabel:  domain hash size = 128
lug 11 10:47:12 mulo kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
lug 11 10:47:12 mulo kernel: NetLabel:  unlabeled traffic allowed by default
lug 11 10:47:12 mulo kernel: mctp: management component transport protocol core
lug 11 10:47:12 mulo kernel: NET: Registered PF_MCTP protocol family
lug 11 10:47:12 mulo kernel: PCI: Using ACPI for IRQ routing
lug 11 10:47:12 mulo kernel: PCI: pci_cache_line_size set to 64 bytes
lug 11 10:47:12 mulo kernel: resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00
lug 11 10:47:12 mulo kernel: e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
lug 11 10:47:12 mulo kernel: e820: reserve RAM buffer [mem 0x00059000-0x0005ffff]
lug 11 10:47:12 mulo kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
lug 11 10:47:12 mulo kernel: e820: reserve RAM buffer [mem 0x73d75000-0x73ffffff]
lug 11 10:47:12 mulo kernel: e820: reserve RAM buffer [mem 0x773d9000-0x77ffffff]
lug 11 10:47:12 mulo kernel: e820: reserve RAM buffer [mem 0x7a565000-0x7bffffff]
lug 11 10:47:12 mulo kernel: e820: reserve RAM buffer [mem 0x7ac00000-0x7bffffff]
lug 11 10:47:12 mulo kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device
lug 11 10:47:12 mulo kernel: pci 0000:00:02.0: vgaarb: bridge control possible
lug 11 10:47:12 mulo kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
lug 11 10:47:12 mulo kernel: vgaarb: loaded
lug 11 10:47:12 mulo kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
lug 11 10:47:12 mulo kernel: hpet0: 8 comparators, 64-bit 19.200000 MHz counter
lug 11 10:47:12 mulo kernel: clocksource: Switched to clocksource tsc-early
lug 11 10:47:12 mulo kernel: VFS: Disk quotas dquot_6.6.0
lug 11 10:47:12 mulo kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
lug 11 10:47:12 mulo kernel: pnp: PnP ACPI init
lug 11 10:47:12 mulo kernel: system 00:00: [io  0x0a00-0x0a1f] has been reserved
lug 11 10:47:12 mulo kernel: system 00:00: [io  0x0a20-0x0a2f] has been reserved
lug 11 10:47:12 mulo kernel: system 00:00: [io  0x0a30-0x0a3f] has been reserved
lug 11 10:47:12 mulo kernel: system 00:00: [io  0x0a40-0x0a4f] has been reserved
lug 11 10:47:12 mulo kernel: system 00:00: [io  0x0a50-0x0a5f] has been reserved
lug 11 10:47:12 mulo kernel: system 00:00: [io  0x0a60-0x0a6f] has been reserved
lug 11 10:47:12 mulo kernel: system 00:01: [io  0x0680-0x069f] has been reserved
lug 11 10:47:12 mulo kernel: system 00:01: [io  0x0400-0x047f] could not be reserved
lug 11 10:47:12 mulo kernel: system 00:01: [io  0x0500-0x05fe] has been reserved
lug 11 10:47:12 mulo kernel: system 00:01: [io  0x0600-0x061f] has been reserved
lug 11 10:47:12 mulo kernel: system 00:01: [io  0x164e-0x164f] has been reserved
lug 11 10:47:12 mulo kernel: system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
lug 11 10:47:12 mulo kernel: system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
lug 11 10:47:12 mulo kernel: system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
lug 11 10:47:12 mulo kernel: system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
lug 11 10:47:12 mulo kernel: system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
lug 11 10:47:12 mulo kernel: system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
lug 11 10:47:12 mulo kernel: system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
lug 11 10:47:12 mulo kernel: system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
lug 11 10:47:12 mulo kernel: system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
lug 11 10:47:12 mulo kernel: pnp: PnP ACPI: found 4 devices
lug 11 10:47:12 mulo kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
lug 11 10:47:12 mulo kernel: NET: Registered PF_INET protocol family
lug 11 10:47:12 mulo kernel: IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
lug 11 10:47:12 mulo kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
lug 11 10:47:12 mulo kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
lug 11 10:47:12 mulo kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
lug 11 10:47:12 mulo kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
lug 11 10:47:12 mulo kernel: TCP: Hash tables configured (established 65536 bind 65536)
lug 11 10:47:12 mulo kernel: MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
lug 11 10:47:12 mulo kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
lug 11 10:47:12 mulo kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
lug 11 10:47:12 mulo kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
lug 11 10:47:12 mulo kernel: NET: Registered PF_XDP protocol family
lug 11 10:47:12 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 11 10:47:12 mulo kernel: pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
lug 11 10:47:12 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 11 10:47:12 mulo kernel: pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
lug 11 10:47:12 mulo kernel: pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 9 [mem 0x7c000001-0xcfffffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 10 [mem 0xe0000000-0xefffffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 11 [mem 0xfea00000-0xfeafffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 12 [mem 0xfed00000-0xfed003ff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 13 [mem 0xfed01000-0xfed01fff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 14 [mem 0xfed03000-0xfed03fff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 15 [mem 0xfed06000-0xfed06fff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 16 [mem 0xfed08000-0xfed09fff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 17 [mem 0xfed80000-0xfedbffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 18 [mem 0xfed1c000-0xfed1cfff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:00: resource 19 [mem 0xfee00000-0xfeefffff window]
lug 11 10:47:12 mulo kernel: pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff]
lug 11 10:47:12 mulo kernel: pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
lug 11 10:47:12 mulo kernel: pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa11fffff]
lug 11 10:47:12 mulo kernel: PCI: CLS 64 bytes, default 64
lug 11 10:47:12 mulo kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
lug 11 10:47:12 mulo kernel: software IO TLB: mapped [mem 0x000000006ede3000-0x0000000072de3000] (64MB)
lug 11 10:47:12 mulo kernel: Trying to unpack rootfs image as initramfs...
lug 11 10:47:12 mulo kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
lug 11 10:47:12 mulo kernel: clocksource: Switched to clocksource tsc
lug 11 10:47:12 mulo kernel: Initialise system trusted keyrings
lug 11 10:47:12 mulo kernel: Key type blacklist registered
lug 11 10:47:12 mulo kernel: workingset: timestamp_bits=36 max_order=21 bucket_order=0
lug 11 10:47:12 mulo kernel: fuse: init (API version 7.41)
lug 11 10:47:12 mulo kernel: integrity: Platform Keyring initialized
lug 11 10:47:12 mulo kernel: integrity: Machine keyring initialized
lug 11 10:47:12 mulo kernel: Key type asymmetric registered
lug 11 10:47:12 mulo kernel: Asymmetric key parser 'x509' registered
lug 11 10:47:12 mulo kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
lug 11 10:47:12 mulo kernel: io scheduler mq-deadline registered
lug 11 10:47:12 mulo kernel: io scheduler kyber registered
lug 11 10:47:12 mulo kernel: io scheduler bfq registered
lug 11 10:47:12 mulo kernel: ledtrig-cpu: registered to indicate activity on CPUs
lug 11 10:47:12 mulo kernel: pcieport 0000:00:13.0: PME: Signaling with IRQ 120
lug 11 10:47:12 mulo kernel: pcieport 0000:00:13.2: PME: Signaling with IRQ 121
lug 11 10:47:12 mulo kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lug 11 10:47:12 mulo kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
lug 11 10:47:12 mulo kernel: ACPI: button: Power Button [PWRB]
lug 11 10:47:12 mulo kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
lug 11 10:47:12 mulo kernel: ACPI: button: Sleep Button [SLPB]
lug 11 10:47:12 mulo kernel: thermal LNXTHERM:00: registered as thermal_zone0
lug 11 10:47:12 mulo kernel: ACPI: thermal: Thermal Zone [TZ01] (49 C)
lug 11 10:47:12 mulo kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
lug 11 10:47:12 mulo kernel: Non-volatile memory driver v1.3
lug 11 10:47:12 mulo kernel: Linux agpgart interface v0.103
lug 11 10:47:12 mulo kernel: ACPI: bus type drm_connector registered
lug 11 10:47:12 mulo kernel: ahci 0000:00:12.0: version 3.0
lug 11 10:47:12 mulo kernel: ahci 0000:00:12.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
lug 11 10:47:12 mulo kernel: ahci 0000:00:12.0: 2/2 ports implemented (port mask 0x3)
lug 11 10:47:12 mulo kernel: ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst 
lug 11 10:47:12 mulo kernel: scsi host0: ahci
lug 11 10:47:12 mulo kernel: scsi host1: ahci
lug 11 10:47:12 mulo kernel: ata1: SATA max UDMA/133 abar m2048@0xa131d000 port 0xa131d100 irq 122 lpm-pol 3
lug 11 10:47:12 mulo kernel: ata2: SATA max UDMA/133 abar m2048@0xa131d000 port 0xa131d180 irq 122 lpm-pol 3
lug 11 10:47:12 mulo kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
lug 11 10:47:12 mulo kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
lug 11 10:47:12 mulo kernel: xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
lug 11 10:47:12 mulo kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
lug 11 10:47:12 mulo kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
lug 11 10:47:12 mulo kernel: xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
lug 11 10:47:12 mulo kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
lug 11 10:47:12 mulo kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
lug 11 10:47:12 mulo kernel: usb usb1: Product: xHCI Host Controller
lug 11 10:47:12 mulo kernel: usb usb1: Manufacturer: Linux 6.12.36-1-lts xhci-hcd
lug 11 10:47:12 mulo kernel: usb usb1: SerialNumber: 0000:00:15.0
lug 11 10:47:12 mulo kernel: hub 1-0:1.0: USB hub found
lug 11 10:47:12 mulo kernel: hub 1-0:1.0: 9 ports detected
lug 11 10:47:12 mulo kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
lug 11 10:47:12 mulo kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
lug 11 10:47:12 mulo kernel: usb usb2: Product: xHCI Host Controller
lug 11 10:47:12 mulo kernel: usb usb2: Manufacturer: Linux 6.12.36-1-lts xhci-hcd
lug 11 10:47:12 mulo kernel: usb usb2: SerialNumber: 0000:00:15.0
lug 11 10:47:12 mulo kernel: hub 2-0:1.0: USB hub found
lug 11 10:47:12 mulo kernel: hub 2-0:1.0: 7 ports detected
lug 11 10:47:12 mulo kernel: usbcore: registered new interface driver usbserial_generic
lug 11 10:47:12 mulo kernel: usbserial: USB Serial support registered for generic
lug 11 10:47:12 mulo kernel: rtc_cmos 00:03: RTC can wake from S4
lug 11 10:47:12 mulo kernel: rtc_cmos 00:03: registered as rtc0
lug 11 10:47:12 mulo kernel: rtc_cmos 00:03: setting system clock to 2025-07-11T08:46:29 UTC (1752223589)
lug 11 10:47:12 mulo kernel: rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
lug 11 10:47:12 mulo kernel: intel_pstate: Intel P-state driver initializing
lug 11 10:47:12 mulo kernel: simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
lug 11 10:47:12 mulo kernel: [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
lug 11 10:47:12 mulo kernel: fbcon: Deferring console take-over
lug 11 10:47:12 mulo kernel: simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
lug 11 10:47:12 mulo kernel: hid: raw HID events driver (C) Jiri Kosina
lug 11 10:47:12 mulo kernel: drop_monitor: Initializing network drop monitor service
lug 11 10:47:12 mulo kernel: NET: Registered PF_INET6 protocol family
lug 11 10:47:12 mulo kernel: Freeing initrd memory: 31692K
lug 11 10:47:12 mulo kernel: Segment Routing with IPv6
lug 11 10:47:12 mulo kernel: RPL Segment Routing with IPv6
lug 11 10:47:12 mulo kernel: In-situ OAM (IOAM) with IPv6
lug 11 10:47:12 mulo kernel: NET: Registered PF_PACKET protocol family
lug 11 10:47:12 mulo kernel: microcode: Current revision: 0x00000026
lug 11 10:47:12 mulo kernel: microcode: Updated early from: 0x0000001a
lug 11 10:47:12 mulo kernel: resctrl: L2 allocation detected
lug 11 10:47:12 mulo kernel: IPI shorthand broadcast: enabled
lug 11 10:47:12 mulo kernel: sched_clock: Marking stable (533491340, 4032910)->(540264196, -2739946)
lug 11 10:47:12 mulo kernel: registered taskstats version 1
lug 11 10:47:12 mulo kernel: Loading compiled-in X.509 certificates
lug 11 10:47:12 mulo kernel: Loaded X.509 cert 'Build time autogenerated kernel key: eee451ffdd9026577431c4c9a3bfa8216a157637'
lug 11 10:47:12 mulo kernel: zswap: loaded using pool zstd/zsmalloc
lug 11 10:47:12 mulo kernel: Demotion targets for Node 0: null
lug 11 10:47:12 mulo kernel: Key type .fscrypt registered
lug 11 10:47:12 mulo kernel: Key type fscrypt-provisioning registered
lug 11 10:47:12 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 11 10:47:12 mulo kernel: integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
lug 11 10:47:12 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 11 10:47:12 mulo kernel: integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
lug 11 10:47:12 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 11 10:47:12 mulo kernel: integrity: Loaded X.509 cert 'CISD FW Update - Certificate: 068268b4a41c93854262d49b4f788f13'
lug 11 10:47:12 mulo kernel: PM:   Magic number: 1:914:775
lug 11 10:47:12 mulo kernel: misc fuse: hash matches
lug 11 10:47:12 mulo kernel: RAS: Correctable Errors collector initialized.
lug 11 10:47:12 mulo kernel: clk: Disabling unused clocks
lug 11 10:47:12 mulo kernel: PM: genpd: Disabling unused power domains
lug 11 10:47:12 mulo kernel: usb 1-2: new high-speed USB device number 2 using xhci_hcd
lug 11 10:47:12 mulo kernel: ata2: SATA link down (SStatus 4 SControl 300)
lug 11 10:47:12 mulo kernel: usb 1-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 0.03
lug 11 10:47:12 mulo kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 11 10:47:12 mulo kernel: usb 1-2: Product: USB2.1 Hub
lug 11 10:47:12 mulo kernel: usb 1-2: Manufacturer: Generic
lug 11 10:47:12 mulo kernel: hub 1-2:1.0: USB hub found
lug 11 10:47:12 mulo kernel: hub 1-2:1.0: 4 ports detected
lug 11 10:47:12 mulo kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
lug 11 10:47:12 mulo kernel: ata1.00: Model 'Samsung SSD 860 EVO 250GB', rev 'RVT01B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
lug 11 10:47:12 mulo kernel: ata1.00: supports DRM functions and may not be fully accessible
lug 11 10:47:12 mulo kernel: ata1.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
lug 11 10:47:12 mulo kernel: ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
lug 11 10:47:12 mulo kernel: ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
lug 11 10:47:12 mulo kernel: ata1.00: supports DRM functions and may not be fully accessible
lug 11 10:47:12 mulo kernel: ata1.00: configured for UDMA/133
lug 11 10:47:12 mulo kernel: ahci 0000:00:12.0: port does not support device sleep
lug 11 10:47:12 mulo kernel: scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
lug 11 10:47:12 mulo kernel: ata1.00: Enabling discard_zeroes_data
lug 11 10:47:12 mulo kernel: sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
lug 11 10:47:12 mulo kernel: sd 0:0:0:0: [sda] Write Protect is off
lug 11 10:47:12 mulo kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
lug 11 10:47:12 mulo kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 10:47:12 mulo kernel: sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
lug 11 10:47:12 mulo kernel: ata1.00: Enabling discard_zeroes_data
lug 11 10:47:12 mulo kernel: usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
lug 11 10:47:12 mulo kernel:  sda: sda1 sda2
lug 11 10:47:12 mulo kernel: sd 0:0:0:0: [sda] supports TCG Opal
lug 11 10:47:12 mulo kernel: sd 0:0:0:0: [sda] Attached SCSI disk
lug 11 10:47:12 mulo kernel: Freeing unused decrypted memory: 2028K
lug 11 10:47:12 mulo kernel: Freeing unused kernel image (initmem) memory: 4288K
lug 11 10:47:12 mulo kernel: Write protecting the kernel read-only data: 34816k
lug 11 10:47:12 mulo kernel: Freeing unused kernel image (rodata/data gap) memory: 2032K
lug 11 10:47:12 mulo kernel: usb 2-1: New USB device found, idVendor=152d, idProduct=0576, bcdDevice=41.01
lug 11 10:47:12 mulo kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
lug 11 10:47:12 mulo kernel: usb 2-1: Product: ANKEJE USB3.0
lug 11 10:47:12 mulo kernel: usb 2-1: Manufacturer: ANKEJE USB3.0
lug 11 10:47:12 mulo kernel: usb 2-1: SerialNumber: DD56419883014
lug 11 10:47:12 mulo kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
lug 11 10:47:12 mulo kernel: rodata_test: all tests were successful
lug 11 10:47:12 mulo kernel: Run /init as init process
lug 11 10:47:12 mulo kernel:   with arguments:
lug 11 10:47:12 mulo kernel:     /init
lug 11 10:47:12 mulo kernel:   with environment:
lug 11 10:47:12 mulo kernel:     HOME=/
lug 11 10:47:12 mulo kernel:     TERM=linux
lug 11 10:47:12 mulo kernel:     BOOT_IMAGE=/vmlinuz-linux-lts
lug 11 10:47:12 mulo kernel:     cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm
lug 11 10:47:12 mulo kernel: usb 1-9: new full-speed USB device number 3 using xhci_hcd
lug 11 10:47:12 mulo kernel: usb 1-9: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
lug 11 10:47:12 mulo kernel: usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
lug 11 10:47:12 mulo kernel: rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
lug 11 10:47:12 mulo kernel: cryptd: max_cpu_qlen set to 1000
lug 11 10:47:12 mulo kernel: sdhci: Secure Digital Host Controller Interface driver
lug 11 10:47:12 mulo kernel: sdhci: Copyright(c) Pierre Ossman
lug 11 10:47:12 mulo kernel: sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 6)
lug 11 10:47:12 mulo kernel: mmc0: CQHCI version 5.10
lug 11 10:47:12 mulo kernel: mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
lug 11 10:47:12 mulo kernel: usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
lug 11 10:47:12 mulo kernel: usb 2-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 0.03
lug 11 10:47:12 mulo kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 11 10:47:12 mulo kernel: usb 2-2: Product: USB3.2 Hub
lug 11 10:47:12 mulo kernel: usb 2-2: Manufacturer: Generic
lug 11 10:47:12 mulo kernel: hub 2-2:1.0: USB hub found
lug 11 10:47:12 mulo kernel: hub 2-2:1.0: 4 ports detected
lug 11 10:47:12 mulo kernel: usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
lug 11 10:47:12 mulo kernel: mmc0: Failed to initialize a non-removable card
lug 11 10:47:12 mulo kernel: usb 1-2.1: New USB device found, idVendor=1997, idProduct=2433, bcdDevice=20.12
lug 11 10:47:12 mulo kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 11 10:47:12 mulo kernel: usb 1-2.1: Product: Mini Keyboard
lug 11 10:47:12 mulo kernel: usb 1-2.1: Manufacturer:  
lug 11 10:47:12 mulo kernel: usbcore: registered new interface driver usbhid
lug 11 10:47:12 mulo kernel: usbhid: USB HID core driver
lug 11 10:47:12 mulo kernel: input:   Mini Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:1997:2433.0001/input/input2
lug 11 10:47:12 mulo kernel: usb 2-3: new SuperSpeed USB device number 4 using xhci_hcd
lug 11 10:47:12 mulo kernel: usb 2-3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 11 10:47:12 mulo kernel: usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 10:47:12 mulo kernel: usb 2-3: Product: Ugreen Storage Device
lug 11 10:47:12 mulo kernel: usb 2-3: Manufacturer: Ugreen
lug 11 10:47:12 mulo kernel: usb 2-3: SerialNumber: 022004019C85
lug 11 10:47:12 mulo kernel: hid-generic 0003:1997:2433.0001: input,hidraw0: USB HID v1.01 Keyboard [  Mini Keyboard] on usb-0000:00:15.0-2.1/input0
lug 11 10:47:12 mulo kernel: input:   Mini Keyboard Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input3
lug 11 10:47:12 mulo kernel: input:   Mini Keyboard System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input4
lug 11 10:47:12 mulo kernel: usb 2-2.2: new SuperSpeed USB device number 5 using xhci_hcd
lug 11 10:47:12 mulo kernel: input:   Mini Keyboard Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input5
lug 11 10:47:12 mulo kernel: hid-generic 0003:1997:2433.0002: input,hidraw1: USB HID v1.01 Mouse [  Mini Keyboard] on usb-0000:00:15.0-2.1/input1
lug 11 10:47:12 mulo kernel: usb 2-2.2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 11 10:47:12 mulo kernel: usb 2-2.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 10:47:12 mulo kernel: usb 2-2.2: Product: ASM105x
lug 11 10:47:12 mulo kernel: usb 2-2.2: Manufacturer: ASMT
lug 11 10:47:12 mulo kernel: usb 2-2.2: SerialNumber: 12345679818C
lug 11 10:47:12 mulo kernel: usb 2-4: new SuperSpeed USB device number 6 using xhci_hcd
lug 11 10:47:12 mulo kernel: usb 2-4: New USB device found, idVendor=1058, idProduct=1230, bcdDevice=10.50
lug 11 10:47:12 mulo kernel: usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 10:47:12 mulo kernel: usb 2-4: Product: My Book 1230
lug 11 10:47:12 mulo kernel: usb 2-4: Manufacturer: Western Digital
lug 11 10:47:12 mulo kernel: usb 2-4: SerialNumber: 574343344530393137333939
lug 11 10:47:12 mulo kernel: usb 2-1: UAS is ignored for this device, using usb-storage instead
lug 11 10:47:12 mulo kernel: usb-storage 2-1:1.0: USB Mass Storage device detected
lug 11 10:47:12 mulo kernel: usb-storage 2-1:1.0: Quirks match for vid 152d pid 0576: 800000
lug 11 10:47:12 mulo kernel: scsi host2: usb-storage 2-1:1.0
lug 11 10:47:12 mulo kernel: usb 2-3: UAS is ignored for this device, using usb-storage instead
lug 11 10:47:12 mulo kernel: usb-storage 2-3:1.0: USB Mass Storage device detected
lug 11 10:47:12 mulo kernel: usb-storage 2-3:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 11 10:47:12 mulo kernel: scsi host3: usb-storage 2-3:1.0
lug 11 10:47:12 mulo kernel: usb 2-2.2: UAS is ignored for this device, using usb-storage instead
lug 11 10:47:12 mulo kernel: usb-storage 2-2.2:1.0: USB Mass Storage device detected
lug 11 10:47:12 mulo kernel: usb-storage 2-2.2:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 11 10:47:12 mulo kernel: scsi host4: usb-storage 2-2.2:1.0
lug 11 10:47:12 mulo kernel: usb-storage 2-4:1.0: USB Mass Storage device detected
lug 11 10:47:12 mulo kernel: usb-storage 2-4:1.0: Quirks match for vid 1058 pid 1230: 800000
lug 11 10:47:12 mulo kernel: scsi host5: usb-storage 2-4:1.0
lug 11 10:47:12 mulo kernel: usbcore: registered new interface driver usb-storage
lug 11 10:47:12 mulo kernel: usbcore: registered new interface driver uas
lug 11 10:47:12 mulo kernel: device-mapper: uevent: version 1.0.3
lug 11 10:47:12 mulo kernel: device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
lug 11 10:47:12 mulo kernel: Key type encrypted registered
lug 11 10:47:12 mulo kernel: fbcon: Taking over console
lug 11 10:47:12 mulo kernel: Console: switching to colour frame buffer device 128x48
lug 11 10:47:12 mulo kernel: scsi 3:0:0:0: Direct-Access     TOSHIBA  MQ01ABD100       0    PQ: 0 ANSI: 6
lug 11 10:47:12 mulo kernel: scsi 4:0:0:0: Direct-Access     ASMT     ASM105x          0    PQ: 0 ANSI: 6
lug 11 10:47:12 mulo kernel: scsi 2:0:0:0: Direct-Access     ANKEJE   USB3.0           4101 PQ: 0 ANSI: 6
lug 11 10:47:12 mulo kernel: scsi 5:0:0:0: Direct-Access     WD       My Book 1230     1050 PQ: 0 ANSI: 6
lug 11 10:47:12 mulo kernel: scsi 5:0:0:1: Enclosure         WD       SES Device       1050 PQ: 0 ANSI: 6
lug 11 10:47:12 mulo kernel: sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 11 10:47:12 mulo kernel: sd 3:0:0:0: [sdb] 4096-byte physical blocks
lug 11 10:47:12 mulo kernel: sd 3:0:0:0: [sdb] Write Protect is off
lug 11 10:47:12 mulo kernel: sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
lug 11 10:47:12 mulo kernel: sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 10:47:12 mulo kernel: sd 5:0:0:0: [sdc] 976746240 4096-byte logical blocks: (4.00 TB/3.64 TiB)
lug 11 10:47:12 mulo kernel: sd 5:0:0:0: [sdc] Write Protect is off
lug 11 10:47:12 mulo kernel: sd 5:0:0:0: [sdc] Mode Sense: 53 00 10 08
lug 11 10:47:12 mulo kernel: sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 11 10:47:12 mulo kernel: sd 4:0:0:0: [sde] 4096-byte physical blocks
lug 11 10:47:12 mulo kernel: sd 5:0:0:0: [sdc] No Caching mode page found
lug 11 10:47:12 mulo kernel: sd 5:0:0:0: [sdc] Assuming drive cache: write through
lug 11 10:47:12 mulo kernel: sd 4:0:0:0: [sde] Write Protect is off
lug 11 10:47:12 mulo kernel: sd 4:0:0:0: [sde] Mode Sense: 43 00 00 00
lug 11 10:47:12 mulo kernel: sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 10:47:12 mulo kernel: sd 2:0:0:0: [sdd] 500118192 512-byte logical blocks: (256 GB/238 GiB)
lug 11 10:47:12 mulo kernel: sd 2:0:0:0: [sdd] Write Protect is off
lug 11 10:47:12 mulo kernel: sd 2:0:0:0: [sdd] Mode Sense: 47 00 00 08
lug 11 10:47:12 mulo kernel: sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 10:47:12 mulo kernel:  sde: sde1
lug 11 10:47:12 mulo kernel:  sdc: sdc1
lug 11 10:47:12 mulo kernel: sd 4:0:0:0: [sde] Attached SCSI disk
lug 11 10:47:12 mulo kernel: sd 5:0:0:0: [sdc] Attached SCSI disk
lug 11 10:47:12 mulo kernel:  sdd: sdd1
lug 11 10:47:12 mulo kernel: sd 2:0:0:0: [sdd] Attached SCSI disk
lug 11 10:47:12 mulo kernel:  sdb: sdb1
lug 11 10:47:12 mulo kernel: sd 3:0:0:0: [sdb] Attached SCSI disk
lug 11 10:47:12 mulo kernel: scsi 5:0:0:1: Failed to get diagnostic page 0x1
lug 11 10:47:12 mulo kernel: scsi 5:0:0:1: Failed to bind enclosure -19
lug 11 10:47:12 mulo kernel: ses 5:0:0:1: Attached Enclosure device
lug 11 10:47:12 mulo kernel: EXT4-fs (dm-1): mounted filesystem 16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12 r/w with ordered data mode. Quota mode: none.
lug 11 10:47:12 mulo systemd[1]: systemd 257.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
lug 11 10:47:12 mulo systemd[1]: Detected architecture x86-64.
lug 11 10:47:12 mulo systemd[1]: Hostname set to <mulo>.
lug 11 10:47:12 mulo systemd[1]: bpf-restrict-fs: LSM BPF program attached
lug 11 10:47:12 mulo systemd[1]: Queued start job for default target Graphical Interface.
lug 11 10:47:12 mulo systemd[1]: Created slice Slice /system/dirmngr.
lug 11 10:47:12 mulo systemd[1]: Created slice Slice /system/getty.
lug 11 10:47:12 mulo systemd[1]: Created slice Slice /system/gpg-agent.
lug 11 10:47:12 mulo systemd[1]: Created slice Slice /system/gpg-agent-browser.
lug 11 10:47:12 mulo systemd[1]: Created slice Slice /system/gpg-agent-extra.
lug 11 10:47:12 mulo systemd[1]: Created slice Slice /system/gpg-agent-ssh.
lug 11 10:47:12 mulo systemd[1]: Created slice Slice /system/keyboxd.
lug 11 10:47:12 mulo systemd[1]: Created slice Slice /system/modprobe.
lug 11 10:47:12 mulo systemd[1]: Created slice Encrypted Volume Units Service Slice.
lug 11 10:47:12 mulo systemd[1]: Created slice Slice /system/systemd-fsck.
lug 11 10:47:12 mulo systemd[1]: Created slice Slice /system/vncserver.
lug 11 10:47:12 mulo systemd[1]: Created slice User and Session Slice.
lug 11 10:47:12 mulo systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
lug 11 10:47:12 mulo systemd[1]: Started Forward Password Requests to Wall Directory Watch.
lug 11 10:47:12 mulo systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
lug 11 10:47:12 mulo systemd[1]: Expecting device /dev/disk/by-uuid/00d46560-89a9-4027-93d5-71fa2c8e247e...
lug 11 10:47:12 mulo systemd[1]: Expecting device /dev/disk/by-uuid/245c388e-dec5-4ba7-adf9-c4da95835a16...
lug 11 10:47:12 mulo systemd[1]: Expecting device /dev/disk/by-uuid/6401ad98-a5cf-4ccd-bc97-90d098f9368f...
lug 11 10:47:12 mulo systemd[1]: Expecting device /dev/disk/by-uuid/9f40d3cb-e5ce-4877-bf27-e57d966cd4a4...
lug 11 10:47:12 mulo systemd[1]: Expecting device /dev/disk/by-uuid/BD2A-C15F...
lug 11 10:47:12 mulo systemd[1]: Expecting device /dev/disk/by-uuid/c561c919-b617-492a-830c-74ababade132...
lug 11 10:47:12 mulo systemd[1]: Expecting device /dev/disk/by-uuid/d405b74f-f22e-4973-86de-a17460f2b1af...
lug 11 10:47:12 mulo systemd[1]: Expecting device /dev/disk/by-uuid/daa95dca-bdba-4e23-ac42-5e9cc33053bc...
lug 11 10:47:12 mulo systemd[1]: Expecting device /dev/disk/by-uuid/dad2d9f0-d032-4959-a92a-b15945b9867b...
lug 11 10:47:12 mulo systemd[1]: Expecting device /dev/disk/by-uuid/e10ab897-b1af-45c8-bb93-9a85d0561900...
lug 11 10:47:12 mulo systemd[1]: Reached target Local Encrypted Volumes.
lug 11 10:47:12 mulo systemd[1]: Reached target Login Prompts.
lug 11 10:47:12 mulo systemd[1]: Reached target Local Integrity Protected Volumes.
lug 11 10:47:12 mulo systemd[1]: Reached target Path Units.
lug 11 10:47:12 mulo systemd[1]: Reached target Remote File Systems.
lug 11 10:47:12 mulo systemd[1]: Reached target Slice Units.
lug 11 10:47:12 mulo systemd[1]: Reached target Swaps.
lug 11 10:47:12 mulo systemd[1]: Reached target Local Verity Protected Volumes.
lug 11 10:47:12 mulo systemd[1]: Listening on Device-mapper event daemon FIFOs.
lug 11 10:47:12 mulo systemd[1]: Listening on LVM2 poll daemon socket.
lug 11 10:47:12 mulo systemd[1]: Listening on Process Core Dump Socket.
lug 11 10:47:12 mulo systemd[1]: Listening on Credential Encryption/Decryption.
lug 11 10:47:12 mulo systemd[1]: Listening on Journal Socket (/dev/log).
lug 11 10:47:12 mulo systemd[1]: Listening on Journal Sockets.
lug 11 10:47:12 mulo systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 10:47:12 mulo systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 10:47:12 mulo systemd[1]: Listening on udev Control Socket.
lug 11 10:47:12 mulo systemd[1]: Listening on udev Kernel Socket.
lug 11 10:47:12 mulo systemd[1]: Mounting Huge Pages File System...
lug 11 10:47:12 mulo systemd[1]: Mounting POSIX Message Queue File System...
lug 11 10:47:12 mulo systemd[1]: Mounting Kernel Debug File System...
lug 11 10:47:12 mulo systemd[1]: Mounting Kernel Trace File System...
lug 11 10:47:12 mulo systemd[1]: Mounting Temporary Directory /tmp...
lug 11 10:47:12 mulo systemd[1]: Starting Create List of Static Device Nodes...
lug 11 10:47:12 mulo systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
lug 11 10:47:12 mulo systemd[1]: Starting Load Kernel Module configfs...
lug 11 10:47:12 mulo systemd[1]: Starting Load Kernel Module dm_mod...
lug 11 10:47:12 mulo systemd[1]: Starting Load Kernel Module drm...
lug 11 10:47:12 mulo systemd[1]: Starting Load Kernel Module fuse...
lug 11 10:47:12 mulo systemd[1]: Starting Load Kernel Module loop...
lug 11 10:47:12 mulo systemd[1]: Starting Mullvad early boot network blocker...
lug 11 10:47:12 mulo systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
lug 11 10:47:12 mulo systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
lug 11 10:47:12 mulo systemd[1]: Starting Journal Service...
lug 11 10:47:12 mulo systemd[1]: Starting Load Kernel Modules...
lug 11 10:47:12 mulo systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 10:47:12 mulo systemd[1]: Starting Remount Root and Kernel File Systems...
lug 11 10:47:12 mulo systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 10:47:12 mulo systemd[1]: Starting Load udev Rules from Credentials...
lug 11 10:47:12 mulo systemd[1]: Starting Coldplug All udev Devices...
lug 11 10:47:12 mulo kernel: loop: module loaded
lug 11 10:47:12 mulo systemd[1]: Mounted Huge Pages File System.
lug 11 10:47:12 mulo systemd[1]: Mounted POSIX Message Queue File System.
lug 11 10:47:12 mulo systemd[1]: Mounted Kernel Debug File System.
lug 11 10:47:12 mulo systemd[1]: Mounted Kernel Trace File System.
lug 11 10:47:12 mulo systemd[1]: Mounted Temporary Directory /tmp.
lug 11 10:47:12 mulo systemd[1]: Finished Create List of Static Device Nodes.
lug 11 10:47:12 mulo systemd[1]: modprobe@configfs.service: Deactivated successfully.
lug 11 10:47:12 mulo systemd[1]: Finished Load Kernel Module configfs.
lug 11 10:47:12 mulo systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
lug 11 10:47:12 mulo systemd[1]: Finished Load Kernel Module dm_mod.
lug 11 10:47:12 mulo systemd[1]: modprobe@drm.service: Deactivated successfully.
lug 11 10:47:12 mulo systemd[1]: Finished Load Kernel Module drm.
lug 11 10:47:12 mulo systemd[1]: modprobe@fuse.service: Deactivated successfully.
lug 11 10:47:12 mulo systemd[1]: Finished Load Kernel Module fuse.
lug 11 10:47:12 mulo systemd[1]: modprobe@loop.service: Deactivated successfully.
lug 11 10:47:12 mulo systemd[1]: Finished Load Kernel Module loop.
lug 11 10:47:12 mulo systemd[1]: Mounting FUSE Control File System...
lug 11 10:47:12 mulo systemd[1]: Mounting Kernel Configuration File System...
lug 11 10:47:12 mulo systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
lug 11 10:47:12 mulo kernel: EXT4-fs (dm-1): re-mounted 16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12.
lug 11 10:47:12 mulo systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
lug 11 10:47:12 mulo systemd[1]: Finished Load Kernel Modules.
lug 11 10:47:12 mulo systemd[1]: Finished Remount Root and Kernel File Systems.
lug 11 10:47:12 mulo systemd[1]: Finished Load udev Rules from Credentials.
lug 11 10:47:12 mulo systemd-journald[389]: Collecting audit messages is disabled.
lug 11 10:47:12 mulo systemd[1]: Mounted FUSE Control File System.
lug 11 10:47:12 mulo systemd[1]: Mounted Kernel Configuration File System.
lug 11 10:47:12 mulo systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
lug 11 10:47:12 mulo systemd[1]: Starting Load/Save OS Random Seed...
lug 11 10:47:12 mulo systemd[1]: Starting Apply Kernel Variables...
lug 11 10:47:12 mulo systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 10:47:12 mulo systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
lug 11 10:47:12 mulo systemd[1]: Create System Users was skipped because no trigger condition checks were met.
lug 11 10:47:12 mulo systemd[1]: Starting Network Time Synchronization...
lug 11 10:47:12 mulo systemd[1]: Starting Create Static Device Nodes in /dev...
lug 11 10:47:12 mulo systemd[1]: Finished Apply Kernel Variables.
lug 11 10:47:12 mulo systemd[1]: Finished Load/Save OS Random Seed.
lug 11 10:47:12 mulo systemd[1]: Starting Network Name Resolution...
lug 11 10:47:12 mulo systemd[1]: Started Journal Service.
lug 11 10:47:13 mulo systemd-journald[389]: Received client request to flush runtime journal.
lug 11 10:47:13 mulo kernel: mousedev: PS/2 mouse device common for all mice
lug 11 10:47:13 mulo kernel: lpc_ich 0000:00:1f.0: No MFD cells added
lug 11 10:47:13 mulo kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
lug 11 10:47:13 mulo kernel: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
lug 11 10:47:13 mulo kernel: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
lug 11 10:47:13 mulo kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
lug 11 10:47:13 mulo kernel: cfg80211: failed to load regulatory.db
lug 11 10:47:13 mulo kernel: input: PC Speaker as /devices/platform/pcspkr/input/input6
lug 11 10:47:13 mulo kernel: RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
lug 11 10:47:13 mulo kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
lug 11 10:47:13 mulo kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
lug 11 10:47:13 mulo kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
lug 11 10:47:13 mulo kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
lug 11 10:47:13 mulo kernel: Bluetooth: Core ver 2.22
lug 11 10:47:13 mulo kernel: NET: Registered PF_BLUETOOTH protocol family
lug 11 10:47:13 mulo kernel: Bluetooth: HCI device and connection manager initialized
lug 11 10:47:13 mulo kernel: Bluetooth: HCI socket layer initialized
lug 11 10:47:13 mulo kernel: Bluetooth: L2CAP socket layer initialized
lug 11 10:47:13 mulo kernel: Bluetooth: SCO socket layer initialized
lug 11 10:47:13 mulo kernel: i801_smbus 0000:00:1f.1: SPD Write Disable is set
lug 11 10:47:13 mulo kernel: i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
lug 11 10:47:13 mulo kernel: i2c i2c-0: Successfully instantiated SPD at 0x50
lug 11 10:47:13 mulo kernel: Intel(R) Wireless WiFi driver for Linux
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: enabling device (0000 -> 0002)
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: Detected crf-id 0x2816, cnv-id 0x1000100 wfpm id 0x80000000
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: PCI dev 31dc/02a4, rev=0x312, rfid=0x108110
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: Detected Intel(R) Wireless-AC 9462
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 0
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 1
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 2
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 3
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 4
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 6
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 8
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 9
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 10
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 11
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 15
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 16
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 18
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 19
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 20
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 21
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 28
lug 11 10:47:13 mulo kernel: iwlwifi 0000:00:0c.0: loaded firmware version 46.7e3e4b69.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
lug 11 10:47:13 mulo kernel: pps_core: LinuxPPS API ver. 1 registered
lug 11 10:47:13 mulo kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
lug 11 10:47:13 mulo kernel: PTP clock support registered
lug 11 10:47:13 mulo kernel: ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
lug 11 10:47:13 mulo kernel: usbcore: registered new interface driver btusb
lug 11 10:47:13 mulo kernel: Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
lug 11 10:47:13 mulo kernel: Bluetooth: hci0: Device revision is 2
lug 11 10:47:13 mulo kernel: Bluetooth: hci0: Secure boot is enabled
lug 11 10:47:13 mulo kernel: Bluetooth: hci0: OTP lock is enabled
lug 11 10:47:13 mulo kernel: Bluetooth: hci0: API lock is enabled
lug 11 10:47:13 mulo kernel: Bluetooth: hci0: Debug lock is disabled
lug 11 10:47:13 mulo kernel: Bluetooth: hci0: Minimum firmware build 1 week 10 2014
lug 11 10:47:13 mulo kernel: Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
lug 11 10:47:13 mulo kernel: Bluetooth: hci0: Boot Address: 0x40800
lug 11 10:47:13 mulo kernel: Bluetooth: hci0: Firmware Version: 201-12.24
lug 11 10:47:13 mulo kernel: r8169 0000:02:00.0 eth0: RTL8168h/8111h, 1c:69:7a:af:b4:46, XID 541, IRQ 131
lug 11 10:47:13 mulo kernel: r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
lug 11 10:47:13 mulo kernel: r8169 0000:02:00.0 eno1: renamed from eth0
lug 11 10:47:14 mulo kernel: i915 0000:00:02.0: [drm] Unknown revision 0x06
lug 11 10:47:14 mulo kernel: i915 0000:00:02.0: [drm] Found GEMINILAKE (device ID 3184) display version 10.00 stepping **
lug 11 10:47:14 mulo kernel: i915 0000:00:02.0: [drm] Unknown revid 0x06
lug 11 10:47:14 mulo kernel: Console: switching to colour dummy device 80x25
lug 11 10:47:14 mulo kernel: iwlwifi 0000:00:0c.0: base HW address: 6c:94:66:56:44:a1, OTP minor version: 0x4
lug 11 10:47:14 mulo kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
lug 11 10:47:14 mulo kernel: i915 0000:00:02.0: [drm] couldn't get memory information
lug 11 10:47:14 mulo kernel: i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
lug 11 10:47:14 mulo kernel: i915 0000:00:02.0: [drm] Applying Increase DDI Disabled quirk
lug 11 10:47:14 mulo kernel: i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
lug 11 10:47:14 mulo kernel: mei_hdcp 0000:00:0f.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
lug 11 10:47:14 mulo kernel: [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1
lug 11 10:47:14 mulo kernel: ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
lug 11 10:47:14 mulo kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
lug 11 10:47:14 mulo kernel: i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
lug 11 10:47:14 mulo kernel: snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
lug 11 10:47:14 mulo kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
lug 11 10:47:14 mulo kernel: iwlwifi 0000:00:0c.0 wlo2: renamed from wlan0
lug 11 10:47:14 mulo kernel: intel_telemetry_core Init
lug 11 10:47:15 mulo kernel: i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
lug 11 10:47:15 mulo kernel: Invalid pltconfig, ensure IPC1 device is enabled in BIOS
lug 11 10:47:15 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
lug 11 10:47:15 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
lug 11 10:47:15 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
lug 11 10:47:15 mulo kernel: intel_rapl_common: Found RAPL domain package
lug 11 10:47:15 mulo kernel: intel_rapl_common: Found RAPL domain core
lug 11 10:47:15 mulo kernel: intel_rapl_common: Found RAPL domain uncore
lug 11 10:47:15 mulo kernel: intel_rapl_common: Found RAPL domain dram
lug 11 10:47:15 mulo kernel: Bluetooth: hci0: Waiting for firmware download to complete
lug 11 10:47:15 mulo kernel: Bluetooth: hci0: Firmware loaded in 1500924 usecs
lug 11 10:47:15 mulo kernel: Bluetooth: hci0: Waiting for device to boot
lug 11 10:47:15 mulo kernel: Bluetooth: hci0: Device booted in 13670 usecs
lug 11 10:47:15 mulo kernel: Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
lug 11 10:47:15 mulo kernel: Bluetooth: hci0: Applying Intel DDC parameters completed
lug 11 10:47:15 mulo kernel: Bluetooth: hci0: Firmware revision 0.1 build 201 week 12 2024
lug 11 10:47:15 mulo kernel: Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
lug 11 10:47:15 mulo kernel: EXT4-fs (dm-2): recovery complete
lug 11 10:47:15 mulo kernel: EXT4-fs (dm-2): mounted filesystem 245c388e-dec5-4ba7-adf9-c4da95835a16 r/w with ordered data mode. Quota mode: none.
lug 11 10:47:16 mulo kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
lug 11 10:47:16 mulo kernel: Bluetooth: BNEP filters: protocol multicast
lug 11 10:47:16 mulo kernel: Bluetooth: BNEP socket layer initialized
lug 11 10:47:16 mulo kernel: Bluetooth: MGMT ver 1.23
lug 11 10:47:16 mulo kernel: NET: Registered PF_ALG protocol family
lug 11 10:47:16 mulo kernel: Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
lug 11 10:47:16 mulo kernel: r8169 0000:02:00.0 eno1: Link is Down
lug 11 10:47:16 mulo kernel: iwlwifi 0000:00:0c.0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
lug 11 10:47:16 mulo kernel: iwlwifi 0000:00:0c.0: Registered PHC clock: iwlwifi-PTP, with index: 0
lug 11 10:47:16 mulo kernel: EXT4-fs (dm-3): recovery complete
lug 11 10:47:16 mulo kernel: EXT4-fs (dm-3): mounted filesystem 9f40d3cb-e5ce-4877-bf27-e57d966cd4a4 r/w with ordered data mode. Quota mode: none.
lug 11 10:47:16 mulo kernel: iwlwifi 0000:00:0c.0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
lug 11 10:47:17 mulo kernel: EXT4-fs (dm-4): warning: mounting fs with errors, running e2fsck is recommended
lug 11 10:47:17 mulo kernel: EXT4-fs (dm-4): mounted filesystem d405b74f-f22e-4973-86de-a17460f2b1af r/w with ordered data mode. Quota mode: none.
lug 11 10:47:17 mulo kernel: EXT4-fs (dm-5): mounted filesystem e10ab897-b1af-45c8-bb93-9a85d0561900 r/w with ordered data mode. Quota mode: none.
lug 11 10:47:19 mulo kernel: r8169 0000:02:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
lug 11 10:47:19 mulo kernel: Bluetooth: RFCOMM TTY layer initialized
lug 11 10:47:19 mulo kernel: Bluetooth: RFCOMM socket layer initialized
lug 11 10:47:19 mulo kernel: Bluetooth: RFCOMM ver 1.11
lug 11 10:47:21 mulo kernel: wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
lug 11 10:47:21 mulo kernel: wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
lug 11 10:48:03 mulo kernel: warning: `qbittorrent' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
lug 11 10:52:23 mulo kernel: EXT4-fs (dm-4): error count since last fsck: 3
lug 11 10:52:23 mulo kernel: EXT4-fs (dm-4): initial error at time 1564406226: ext4_journal_check_start:56
lug 11 10:52:23 mulo kernel: EXT4-fs (dm-4): last error at time 1736005403: __ext4_find_entry:1683: inode 36454401
lug 11 11:15:54 mulo kernel: usb 2-3: USB disconnect, device number 4
lug 11 11:15:54 mulo kernel: sd 3:0:0:0: [sdb] Synchronizing SCSI cache
lug 11 11:15:54 mulo kernel: sd 3:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
lug 11 11:15:54 mulo kernel: usb 2-3: new SuperSpeed USB device number 7 using xhci_hcd
lug 11 11:15:54 mulo kernel: usb 2-3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 11 11:15:54 mulo kernel: usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 11:15:54 mulo kernel: usb 2-3: Product: Ugreen Storage Device
lug 11 11:15:54 mulo kernel: usb 2-3: Manufacturer: Ugreen
lug 11 11:15:54 mulo kernel: usb 2-3: SerialNumber: 022004019C85
lug 11 11:15:54 mulo kernel: usb 2-3: UAS is ignored for this device, using usb-storage instead
lug 11 11:15:54 mulo kernel: usb-storage 2-3:1.0: USB Mass Storage device detected
lug 11 11:15:54 mulo kernel: usb-storage 2-3:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 11 11:15:54 mulo kernel: scsi host6: usb-storage 2-3:1.0
lug 11 11:15:54 mulo kernel: usb 2-1: USB disconnect, device number 2
lug 11 11:15:54 mulo kernel: EXT4-fs (dm-3): unmounting filesystem 9f40d3cb-e5ce-4877-bf27-e57d966cd4a4.
lug 11 11:15:54 mulo kernel: sd 2:0:0:0: [sdd] Synchronizing SCSI cache
lug 11 11:15:54 mulo kernel: sd 2:0:0:0: [sdd] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
lug 11 11:15:54 mulo kernel: Buffer I/O error on dev dm-3, logical block 30965760, lost sync page write
lug 11 11:15:54 mulo kernel: JBD2: I/O error when updating journal superblock for dm-3-8.
lug 11 11:15:54 mulo kernel: Aborting journal on device dm-3-8.
lug 11 11:15:54 mulo kernel: Buffer I/O error on dev dm-3, logical block 30965760, lost sync page write
lug 11 11:15:54 mulo kernel: JBD2: I/O error when updating journal superblock for dm-3-8.
lug 11 11:15:54 mulo kernel: Buffer I/O error on dev dm-3, logical block 0, lost sync page write
lug 11 11:15:54 mulo kernel: EXT4-fs (dm-3): I/O error while writing superblock
lug 11 11:15:54 mulo kernel: usb 2-1: new SuperSpeed USB device number 8 using xhci_hcd
lug 11 11:15:54 mulo kernel: usb 2-1: New USB device found, idVendor=152d, idProduct=0576, bcdDevice=41.01
lug 11 11:15:54 mulo kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
lug 11 11:15:54 mulo kernel: usb 2-1: Product: ANKEJE USB3.0
lug 11 11:15:54 mulo kernel: usb 2-1: Manufacturer: ANKEJE USB3.0
lug 11 11:15:54 mulo kernel: usb 2-1: SerialNumber: DD56419883014
lug 11 11:15:54 mulo kernel: usb 2-1: UAS is ignored for this device, using usb-storage instead
lug 11 11:15:54 mulo kernel: usb-storage 2-1:1.0: USB Mass Storage device detected
lug 11 11:15:54 mulo kernel: usb-storage 2-1:1.0: Quirks match for vid 152d pid 0576: 800000
lug 11 11:15:54 mulo kernel: scsi host2: usb-storage 2-1:1.0
lug 11 11:15:55 mulo kernel: scsi 6:0:0:0: Direct-Access     TOSHIBA  MQ01ABD100       0    PQ: 0 ANSI: 6
lug 11 11:15:55 mulo kernel: sd 6:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 11 11:15:55 mulo kernel: sd 6:0:0:0: [sdd] 4096-byte physical blocks
lug 11 11:15:55 mulo kernel: sd 6:0:0:0: [sdd] Write Protect is off
lug 11 11:15:55 mulo kernel: sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00
lug 11 11:15:55 mulo kernel: sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 11:15:55 mulo kernel:  sdd: sdd1
lug 11 11:15:55 mulo kernel: sd 6:0:0:0: [sdd] Attached SCSI disk
lug 11 11:15:55 mulo kernel: scsi 2:0:0:0: Direct-Access     ANKEJE   USB3.0           4101 PQ: 0 ANSI: 6
lug 11 11:15:56 mulo kernel: sd 2:0:0:0: [sdf] 500118192 512-byte logical blocks: (256 GB/238 GiB)
lug 11 11:15:56 mulo kernel: sd 2:0:0:0: [sdf] Write Protect is off
lug 11 11:15:56 mulo kernel: sd 2:0:0:0: [sdf] Mode Sense: 47 00 00 08
lug 11 11:15:56 mulo kernel: sd 2:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 11:15:56 mulo kernel:  sdf: sdf1
lug 11 11:15:56 mulo kernel: sd 2:0:0:0: [sdf] Attached SCSI disk
lug 11 11:16:11 mulo kernel: EXT4-fs error (device dm-2): __ext4_find_entry:1639: inode #4194305: comm rtorrent main: reading directory lblock 0
lug 11 11:16:11 mulo kernel: EXT4-fs error (device dm-2): __ext4_find_entry:1639: inode #52822017: comm rtorrent main: reading directory lblock 0
lug 11 11:16:11 mulo kernel: EXT4-fs error (device dm-2): __ext4_find_entry:1639: inode #38330370: comm rtorrent main: reading directory lblock 0
lug 11 11:16:14 mulo kernel: EXT4-fs error (device dm-2): __ext4_find_entry:1639: inode #38802417: comm rtorrent main: reading directory lblock 0
lug 11 11:16:14 mulo kernel: EXT4-fs error (device dm-2): __ext4_find_entry:1639: inode #33423361: comm rtorrent main: reading directory lblock 0
lug 11 11:16:14 mulo kernel: EXT4-fs error (device dm-2): __ext4_find_entry:1639: inode #29753346: comm rtorrent main: reading directory lblock 0
lug 11 11:16:14 mulo kernel: EXT4-fs error (device dm-2): __ext4_find_entry:1639: inode #38802568: comm rtorrent main: reading directory lblock 0
lug 11 11:16:14 mulo kernel: EXT4-fs error (device dm-2): __ext4_find_entry:1639: inode #38797405: comm rtorrent main: reading directory lblock 0
lug 11 11:16:14 mulo kernel: EXT4-fs error (device dm-2): __ext4_find_entry:1639: inode #38799211: comm rtorrent main: reading directory lblock 0
lug 11 11:16:14 mulo kernel: EXT4-fs error (device dm-2): __ext4_find_entry:1639: inode #38799402: comm rtorrent main: reading directory lblock 0
lug 11 11:16:14 mulo kernel: EXT4-fs warning (device dm-2): dx_probe:823: inode #48627713: lblock 0: comm rtorrent main: error -5 reading directory block
lug 11 11:16:16 mulo kernel: Aborting journal on device dm-2-8.
lug 11 11:16:16 mulo kernel: Buffer I/O error on dev dm-2, logical block 121667584, lost sync page write
lug 11 11:16:16 mulo kernel: JBD2: I/O error when updating journal superblock for dm-2-8.

In a still mounted disk -> while true; do sudo file -s /dev/sde; sleep 5; done

/dev/sde: DOS/MBR boot sector MS-MBR Windows 7 english at offset 0x163 "Invalid partition table" at offset 0x17b "Error loading operating system" at offset 0x19a "Missing operating system", disk signature 0x92577749; partition 1 : ID=0x83, start-CHS (0x0,32,33), end-CHS (0x3ff,254,63), startsector 2048, 1953523120 sectors
/dev/sde: DOS/MBR boot sector MS-MBR Windows 7 english at offset 0x163 "Invalid partition table" at offset 0x17b "Error loading operating system" at offset 0x19a "Missing operating system", disk signature 0x92577749; partition 1 : ID=0x83, start-CHS (0x0,32,33), end-CHS (0x3ff,254,63), startsector 2048, 1953523120 sectors
/dev/sde: DOS/MBR boot sector MS-MBR Windows 7 english at offset 0x163 "Invalid partition table" at offset 0x17b "Error loading operating system" at offset 0x19a "Missing operating system", disk signature 0x92577749; partition 1 : ID=0x83, start-CHS (0x0,32,33), end-CHS (0x3ff,254,63), startsector 2048, 1953523120 sectors
/dev/sde: DOS/MBR boot sector MS-MBR Windows 7 english at offset 0x163 "Invalid partition table" at offset 0x17b "Error loading operating system" at offset 0x19a "Missing operating system", disk signature 0x92577749; partition 1 : ID=0x83, start-CHS (0x0,32,33), end-CHS (0x3ff,254,63), startsector 2048, 1953523120 sectors
/dev/sde: DOS/MBR boot sector MS-MBR Windows 7 english at offset 0x163 "Invalid partition table" at offset 0x17b "Error loading operating system" at offset 0x19a "Missing operating system", disk signature 0x92577749; partition 1 : ID=0x83, start-CHS (0x0,32,33), end-CHS (0x3ff,254,63), startsector 2048, 1953523120 sectors
/dev/sde: DOS/MBR boot sector MS-MBR Windows 7 english at offset 0x163 "Invalid partition table" at offset 0x17b "Error loading operating system" at offset 0x19a "Missing operating system", disk signature 0x92577749; partition 1 : ID=0x83, start-CHS (0x0,32,33), end-CHS (0x3ff,254,63), startsector 2048, 1953523120 sectors
/dev/sde: DOS/MBR boot sector MS-MBR Windows 7 english at offset 0x163 "Invalid partition table" at offset 0x17b "Error loading operating system" at offset 0x19a "Missing operating system", disk signature 0x92577749; partition 1 : ID=0x83, start-CHS (0x0,32,33), end-CHS (0x3ff,254,63), startsector 2048, 1953523120 sectors
/dev/sde: DOS/MBR boot sector MS-MBR Windows 7 english at offset 0x163 "Invalid partition table" at offset 0x17b "Error loading operating system" at offset 0x19a "Missing operating system", disk signature 0x92577749; partition 1 : ID=0x83, start-CHS (0x0,32,33), end-CHS (0x3ff,254,63), startsector 2048, 1953523120 sectors
/dev/sde: DOS/MBR boot sector MS-MBR Windows 7 english at offset 0x163 "Invalid partition table" at offset 0x17b "Error loading operating system" at offset 0x19a "Missing operating system", disk signature 0x92577749; partition 1 : ID=0x83, start-CHS (0x0,32,33), end-CHS (0x3ff,254,63), startsector 2048, 1953523120 sectors
/dev/sde: DOS/MBR boot sector MS-MBR Windows 7 english at offset 0x163 "Invalid partition table" at offset 0x17b "Error loading operating system" at offset 0x19a "Missing operating system", disk signature 0x92577749; partition 1 : ID=0x83, start-CHS (0x0,32,33), end-CHS (0x3ff,254,63), startsector 2048, 1953523120 sectors

In an umounted disk -> while true; do sudo file -s /dev/sdd; sleep 5; done

/dev/sdd: DOS/MBR boot sector; partition 1 : ID=0xee, start-CHS (0x0,0,1), end-CHS (0x3ff,254,63), startsector 1, 1953525167 sectors, extended partition table (last)
/dev/sdd: DOS/MBR boot sector; partition 1 : ID=0xee, start-CHS (0x0,0,1), end-CHS (0x3ff,254,63), startsector 1, 1953525167 sectors, extended partition table (last)
/dev/sdd: DOS/MBR boot sector; partition 1 : ID=0xee, start-CHS (0x0,0,1), end-CHS (0x3ff,254,63), startsector 1, 1953525167 sectors, extended partition table (last)
/dev/sdd: DOS/MBR boot sector; partition 1 : ID=0xee, start-CHS (0x0,0,1), end-CHS (0x3ff,254,63), startsector 1, 1953525167 sectors, extended partition table (last)
/dev/sdd: DOS/MBR boot sector; partition 1 : ID=0xee, start-CHS (0x0,0,1), end-CHS (0x3ff,254,63), startsector 1, 1953525167 sectors, extended partition table (last)
/dev/sdd: DOS/MBR boot sector; partition 1 : ID=0xee, start-CHS (0x0,0,1), end-CHS (0x3ff,254,63), startsector 1, 1953525167 sectors, extended partition table (last)
/dev/sdd: DOS/MBR boot sector; partition 1 : ID=0xee, start-CHS (0x0,0,1), end-CHS (0x3ff,254,63), startsector 1, 1953525167 sectors, extended partition table (last)
/dev/sdd: DOS/MBR boot sector; partition 1 : ID=0xee, start-CHS (0x0,0,1), end-CHS (0x3ff,254,63), startsector 1, 1953525167 sectors, extended partition table (last)

Last edited by pepper (2025-07-11 11:41:57)

pepper · 2025-07-11 16:35:02

I also tried to reboot the system with autosuspend disabled and kernel standard not-lts, same problem if someone have ideas.. I can't solve the issue in any way, everytime there is a different drive unmounted and after ~1h all 4 drives are unmounted

journalctl -k -b

lug 11 18:18:23 mulo kernel: Linux version 6.15.5-arch1-1 (linux@archlinux) (gcc (GCC) 15.1.1 20250425, GNU ld (GNU Binutils) 2.44.0) #1 SMP PREEMPT_DYNAMIC Sun, 06 Jul 2025 11:14:36 +0000
lug 11 18:18:23 mulo kernel: Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/volgroup_0-lv_root rw cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm root=/dev/volgroup_0/lv_root loglevel=3 quiet usbcore.autosuspend=-1
lug 11 18:18:23 mulo kernel: BIOS-provided physical RAM map:
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x0000000000040000-0x0000000000058fff] usable
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x0000000000059000-0x0000000000059fff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x000000000005a000-0x000000000009dfff] usable
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x0000000012151000-0x00000000773d8fff] usable
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x00000000773d9000-0x0000000079c9dfff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x0000000079c9e000-0x0000000079cc1fff] ACPI data
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x0000000079cc2000-0x0000000079d21fff] ACPI NVS
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x0000000079d22000-0x000000007a0b6fff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x000000007a0b7000-0x000000007a170fff] type 20
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x000000007a171000-0x000000007a564fff] usable
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x000000007a565000-0x000000007a610fff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x000000007a611000-0x000000007abfffff] usable
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x000000007ac00000-0x000000007fffffff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
lug 11 18:18:23 mulo kernel: BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
lug 11 18:18:23 mulo kernel: NX (Execute Disable) protection: active
lug 11 18:18:23 mulo kernel: APIC: Static calls initialized
lug 11 18:18:23 mulo kernel: efi: EFI v2.7 by American Megatrends
lug 11 18:18:23 mulo kernel: efi: ACPI 2.0=0x79cae000 ACPI=0x79cae000 SMBIOS=0x79f6f000 SMBIOS 3.0=0x79f6e000 MEMATTR=0x72de3018 ESRT=0x79f4af18 
lug 11 18:18:23 mulo kernel: efi: Remove mem50: MMIO range=[0xd0000000-0xd0ffffff] (16MB) from e820 map
lug 11 18:18:23 mulo kernel: e820: remove [mem 0xd0000000-0xd0ffffff] reserved
lug 11 18:18:23 mulo kernel: efi: Not removing mem51: MMIO range=[0xd3709000-0xd3709fff] (4KB) from e820 map
lug 11 18:18:23 mulo kernel: efi: Remove mem52: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
lug 11 18:18:23 mulo kernel: e820: remove [mem 0xe0000000-0xefffffff] reserved
lug 11 18:18:23 mulo kernel: efi: Not removing mem53: MMIO range=[0xfe042000-0xfe042fff] (4KB) from e820 map
lug 11 18:18:23 mulo kernel: efi: Not removing mem54: MMIO range=[0xfe043000-0xfe043fff] (4KB) from e820 map
lug 11 18:18:23 mulo kernel: efi: Not removing mem55: MMIO range=[0xfe044000-0xfe044fff] (4KB) from e820 map
lug 11 18:18:23 mulo kernel: efi: Not removing mem56: MMIO range=[0xfe900000-0xfe902fff] (12KB) from e820 map
lug 11 18:18:23 mulo kernel: efi: Not removing mem57: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
lug 11 18:18:23 mulo kernel: efi: Not removing mem58: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map
lug 11 18:18:23 mulo kernel: efi: Not removing mem59: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
lug 11 18:18:23 mulo kernel: efi: Remove mem60: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
lug 11 18:18:23 mulo kernel: e820: remove [mem 0xff000000-0xffffffff] reserved
lug 11 18:18:23 mulo kernel: SMBIOS 3.2.0 present.
lug 11 18:18:23 mulo kernel: DMI: Intel(R) Client Systems NUC7PJYHN/NUC7JYB, BIOS JYGLKCPX.86A.0065.2021.0722.1137 07/22/2021
lug 11 18:18:23 mulo kernel: DMI: Memory slots populated: 2/2
lug 11 18:18:23 mulo kernel: tsc: Detected 1996.800 MHz processor
lug 11 18:18:23 mulo kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
lug 11 18:18:23 mulo kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
lug 11 18:18:23 mulo kernel: last_pfn = 0x280000 max_arch_pfn = 0x400000000
lug 11 18:18:23 mulo kernel: MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs
lug 11 18:18:23 mulo kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
lug 11 18:18:23 mulo kernel: last_pfn = 0x7ac00 max_arch_pfn = 0x400000000
lug 11 18:18:23 mulo kernel: esrt: Reserving ESRT space from 0x0000000079f4af18 to 0x0000000079f4af50.
lug 11 18:18:23 mulo kernel: Using GB pages for direct mapping
lug 11 18:18:23 mulo kernel: Secure boot disabled
lug 11 18:18:23 mulo kernel: RAMDISK: [mem 0x34355000-0x361a1fff]
lug 11 18:18:23 mulo kernel: ACPI: Early table checksum verification disabled
lug 11 18:18:23 mulo kernel: ACPI: RSDP 0x0000000079CAE000 000024 (v02 INTEL )
lug 11 18:18:23 mulo kernel: ACPI: XSDT 0x0000000079CAE0B0 0000D4 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 18:18:23 mulo kernel: ACPI: FACP 0x0000000079CBB630 000114 (v06 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 18:18:23 mulo kernel: ACPI: DSDT 0x0000000079CAE230 00D3FB (v02 INTEL  NUC7CJYB 01072009 INTL 20160930)
lug 11 18:18:23 mulo kernel: ACPI: FACS 0x0000000079D21080 000040
lug 11 18:18:23 mulo kernel: ACPI: FPDT 0x0000000079CBB750 000044 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 18:18:23 mulo kernel: ACPI: FIDT 0x0000000079CBB7A0 00009C (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 18:18:23 mulo kernel: ACPI: MCFG 0x0000000079CBB840 00003C (v01 INTEL  NUC7CJYB 01072009 MSFT 00000097)
lug 11 18:18:23 mulo kernel: ACPI: DBG2 0x0000000079CBB880 000072 (v00 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 18:18:23 mulo kernel: ACPI: DBGP 0x0000000079CBB900 000034 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 18:18:23 mulo kernel: ACPI: HPET 0x0000000079CBB940 000038 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 18:18:23 mulo kernel: ACPI: LPIT 0x0000000079CBB980 00005C (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 18:18:23 mulo kernel: ACPI: APIC 0x0000000079CBB9E0 000084 (v04 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 18:18:23 mulo kernel: ACPI: NPKT 0x0000000079CBBA70 000065 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 18:18:23 mulo kernel: ACPI: SSDT 0x0000000079CBBAE0 0010B3 (v02 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 18:18:23 mulo kernel: ACPI: SSDT 0x0000000079CBCBA0 0009FF (v01 INTEL  NUC7CJYB 00001000 INTL 20160930)
lug 11 18:18:23 mulo kernel: ACPI: SSDT 0x0000000079CBD5A0 0000B1 (v01 INTEL  NUC7CJYB 00001000 INTL 20160930)
lug 11 18:18:23 mulo kernel: ACPI: SSDT 0x0000000079CBD660 000661 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 18:18:23 mulo kernel: ACPI: SSDT 0x0000000079CBDCD0 000775 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 18:18:23 mulo kernel: ACPI: SSDT 0x0000000079CBE450 00035F (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 18:18:23 mulo kernel: ACPI: SSDT 0x0000000079CBE7B0 0001E6 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 18:18:23 mulo kernel: ACPI: SSDT 0x0000000079CBE9A0 00286F (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 18:18:23 mulo kernel: ACPI: BGRT 0x0000000079CC1210 000038 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 18:18:23 mulo kernel: ACPI: DMAR 0x0000000079CC1250 0000A8 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 18:18:23 mulo kernel: ACPI: WDAT 0x0000000079CC1300 000104 (v01 INTEL  NUC7CJYB 00000000      00000000)
lug 11 18:18:23 mulo kernel: ACPI: WSMT 0x0000000079CC1410 000028 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 18:18:23 mulo kernel: ACPI: Reserving FACP table memory at [mem 0x79cbb630-0x79cbb743]
lug 11 18:18:23 mulo kernel: ACPI: Reserving DSDT table memory at [mem 0x79cae230-0x79cbb62a]
lug 11 18:18:23 mulo kernel: ACPI: Reserving FACS table memory at [mem 0x79d21080-0x79d210bf]
lug 11 18:18:23 mulo kernel: ACPI: Reserving FPDT table memory at [mem 0x79cbb750-0x79cbb793]
lug 11 18:18:23 mulo kernel: ACPI: Reserving FIDT table memory at [mem 0x79cbb7a0-0x79cbb83b]
lug 11 18:18:23 mulo kernel: ACPI: Reserving MCFG table memory at [mem 0x79cbb840-0x79cbb87b]
lug 11 18:18:23 mulo kernel: ACPI: Reserving DBG2 table memory at [mem 0x79cbb880-0x79cbb8f1]
lug 11 18:18:23 mulo kernel: ACPI: Reserving DBGP table memory at [mem 0x79cbb900-0x79cbb933]
lug 11 18:18:23 mulo kernel: ACPI: Reserving HPET table memory at [mem 0x79cbb940-0x79cbb977]
lug 11 18:18:23 mulo kernel: ACPI: Reserving LPIT table memory at [mem 0x79cbb980-0x79cbb9db]
lug 11 18:18:23 mulo kernel: ACPI: Reserving APIC table memory at [mem 0x79cbb9e0-0x79cbba63]
lug 11 18:18:23 mulo kernel: ACPI: Reserving NPKT table memory at [mem 0x79cbba70-0x79cbbad4]
lug 11 18:18:23 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbbae0-0x79cbcb92]
lug 11 18:18:23 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbcba0-0x79cbd59e]
lug 11 18:18:23 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbd5a0-0x79cbd650]
lug 11 18:18:23 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbd660-0x79cbdcc0]
lug 11 18:18:23 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbdcd0-0x79cbe444]
lug 11 18:18:23 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe450-0x79cbe7ae]
lug 11 18:18:23 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe7b0-0x79cbe995]
lug 11 18:18:23 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe9a0-0x79cc120e]
lug 11 18:18:23 mulo kernel: ACPI: Reserving BGRT table memory at [mem 0x79cc1210-0x79cc1247]
lug 11 18:18:23 mulo kernel: ACPI: Reserving DMAR table memory at [mem 0x79cc1250-0x79cc12f7]
lug 11 18:18:23 mulo kernel: ACPI: Reserving WDAT table memory at [mem 0x79cc1300-0x79cc1403]
lug 11 18:18:23 mulo kernel: ACPI: Reserving WSMT table memory at [mem 0x79cc1410-0x79cc1437]
lug 11 18:18:23 mulo kernel: No NUMA configuration found
lug 11 18:18:23 mulo kernel: Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
lug 11 18:18:23 mulo kernel: NODE_DATA(0) allocated [mem 0x27ffd5280-0x27fffffff]
lug 11 18:18:23 mulo kernel: Zone ranges:
lug 11 18:18:23 mulo kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
lug 11 18:18:23 mulo kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
lug 11 18:18:23 mulo kernel:   Normal   [mem 0x0000000100000000-0x000000027fffffff]
lug 11 18:18:23 mulo kernel:   Device   empty
lug 11 18:18:23 mulo kernel: Movable zone start for each node
lug 11 18:18:23 mulo kernel: Early memory node ranges
lug 11 18:18:23 mulo kernel:   node   0: [mem 0x0000000000001000-0x000000000003efff]
lug 11 18:18:23 mulo kernel:   node   0: [mem 0x0000000000040000-0x0000000000058fff]
lug 11 18:18:23 mulo kernel:   node   0: [mem 0x000000000005a000-0x000000000009dfff]
lug 11 18:18:23 mulo kernel:   node   0: [mem 0x0000000000100000-0x000000000fffffff]
lug 11 18:18:23 mulo kernel:   node   0: [mem 0x0000000012151000-0x00000000773d8fff]
lug 11 18:18:23 mulo kernel:   node   0: [mem 0x000000007a171000-0x000000007a564fff]
lug 11 18:18:23 mulo kernel:   node   0: [mem 0x000000007a611000-0x000000007abfffff]
lug 11 18:18:23 mulo kernel:   node   0: [mem 0x0000000100000000-0x000000027fffffff]
lug 11 18:18:23 mulo kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
lug 11 18:18:23 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 11 18:18:23 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 11 18:18:23 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 11 18:18:23 mulo kernel: On node 0, zone DMA: 98 pages in unavailable ranges
lug 11 18:18:23 mulo kernel: On node 0, zone DMA32: 8529 pages in unavailable ranges
lug 11 18:18:23 mulo kernel: On node 0, zone DMA32: 11672 pages in unavailable ranges
lug 11 18:18:23 mulo kernel: On node 0, zone DMA32: 172 pages in unavailable ranges
lug 11 18:18:23 mulo kernel: On node 0, zone Normal: 21504 pages in unavailable ranges
lug 11 18:18:23 mulo kernel: Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
lug 11 18:18:23 mulo kernel: ACPI: PM-Timer IO Port: 0x408
lug 11 18:18:23 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
lug 11 18:18:23 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
lug 11 18:18:23 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
lug 11 18:18:23 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
lug 11 18:18:23 mulo kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
lug 11 18:18:23 mulo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
lug 11 18:18:23 mulo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
lug 11 18:18:23 mulo kernel: ACPI: Using ACPI (MADT) for SMP configuration information
lug 11 18:18:23 mulo kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
lug 11 18:18:23 mulo kernel: e820: update [mem 0x73d75000-0x73e0efff] usable ==> reserved
lug 11 18:18:23 mulo kernel: TSC deadline timer available
lug 11 18:18:23 mulo kernel: CPU topo: Max. logical packages:   1
lug 11 18:18:23 mulo kernel: CPU topo: Max. logical dies:       1
lug 11 18:18:23 mulo kernel: CPU topo: Max. dies per package:   1
lug 11 18:18:23 mulo kernel: CPU topo: Max. threads per core:   1
lug 11 18:18:23 mulo kernel: CPU topo: Num. cores per package:     4
lug 11 18:18:23 mulo kernel: CPU topo: Num. threads per package:   4
lug 11 18:18:23 mulo kernel: CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
lug 11 18:18:23 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
lug 11 18:18:23 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
lug 11 18:18:23 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x00059000-0x00059fff]
lug 11 18:18:23 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
lug 11 18:18:23 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x10000000-0x12150fff]
lug 11 18:18:23 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x73d75000-0x73e0efff]
lug 11 18:18:23 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x773d9000-0x7a170fff]
lug 11 18:18:23 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x7a565000-0x7a610fff]
lug 11 18:18:23 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0xffffffff]
lug 11 18:18:23 mulo kernel: [mem 0x80000000-0xd3708fff] available for PCI devices
lug 11 18:18:23 mulo kernel: Booting paravirtualized kernel on bare hardware
lug 11 18:18:23 mulo kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
lug 11 18:18:23 mulo kernel: setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
lug 11 18:18:23 mulo kernel: percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u524288
lug 11 18:18:23 mulo kernel: pcpu-alloc: s217088 r8192 d28672 u524288 alloc=1*2097152
lug 11 18:18:23 mulo kernel: pcpu-alloc: [0] 0 1 2 3 
lug 11 18:18:23 mulo kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/volgroup_0-lv_root rw cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm root=/dev/volgroup_0/lv_root loglevel=3 quiet usbcore.autosuspend=-1
lug 11 18:18:23 mulo kernel: Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm", will be passed to user space.
lug 11 18:18:23 mulo kernel: random: crng init done
lug 11 18:18:23 mulo kernel: printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
lug 11 18:18:23 mulo kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
lug 11 18:18:23 mulo kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
lug 11 18:18:23 mulo kernel: software IO TLB: area num 4.
lug 11 18:18:23 mulo kernel: Fallback order for Node 0: 0 
lug 11 18:18:23 mulo kernel: Built 1 zonelists, mobility grouping on.  Total pages: 2055174
lug 11 18:18:23 mulo kernel: Policy zone: Normal
lug 11 18:18:23 mulo kernel: mem auto-init: stack:all(zero), heap alloc:on, heap free:off
lug 11 18:18:23 mulo kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
lug 11 18:18:23 mulo kernel: ftrace: allocating 55580 entries in 220 pages
lug 11 18:18:23 mulo kernel: ftrace: allocated 220 pages with 5 groups
lug 11 18:18:23 mulo kernel: Dynamic Preempt: full
lug 11 18:18:23 mulo kernel: rcu: Preemptible hierarchical RCU implementation.
lug 11 18:18:23 mulo kernel: rcu:         RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
lug 11 18:18:23 mulo kernel: rcu:         RCU priority boosting: priority 1 delay 500 ms.
lug 11 18:18:23 mulo kernel:         Trampoline variant of Tasks RCU enabled.
lug 11 18:18:23 mulo kernel:         Rude variant of Tasks RCU enabled.
lug 11 18:18:23 mulo kernel:         Tracing variant of Tasks RCU enabled.
lug 11 18:18:23 mulo kernel: rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
lug 11 18:18:23 mulo kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
lug 11 18:18:23 mulo kernel: RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 11 18:18:23 mulo kernel: RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 11 18:18:23 mulo kernel: RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 11 18:18:23 mulo kernel: NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
lug 11 18:18:23 mulo kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention.
lug 11 18:18:23 mulo kernel: kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
lug 11 18:18:23 mulo kernel: Console: colour dummy device 80x25
lug 11 18:18:23 mulo kernel: printk: legacy console [tty0] enabled
lug 11 18:18:23 mulo kernel: ACPI: Core revision 20240827
lug 11 18:18:23 mulo kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
lug 11 18:18:23 mulo kernel: APIC: Switch to symmetric I/O mode setup
lug 11 18:18:23 mulo kernel: DMAR: Host address width 39
lug 11 18:18:23 mulo kernel: DMAR: DRHD base: 0x000000fed64000 flags: 0x0
lug 11 18:18:23 mulo kernel: DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
lug 11 18:18:23 mulo kernel: DMAR: DRHD base: 0x000000fed65000 flags: 0x1
lug 11 18:18:23 mulo kernel: DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
lug 11 18:18:23 mulo kernel: DMAR: RMRR base: 0x00000079c3c000 end: 0x00000079c5bfff
lug 11 18:18:23 mulo kernel: DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
lug 11 18:18:23 mulo kernel: DMAR-IR: IOAPIC id 1 under DRHD base  0xfed65000 IOMMU 1
lug 11 18:18:23 mulo kernel: DMAR-IR: HPET id 0 under DRHD base 0xfed65000
lug 11 18:18:23 mulo kernel: DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
lug 11 18:18:23 mulo kernel: DMAR-IR: Enabled IRQ remapping in x2apic mode
lug 11 18:18:23 mulo kernel: x2apic enabled
lug 11 18:18:23 mulo kernel: APIC: Switched APIC routing to: cluster x2apic
lug 11 18:18:23 mulo kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
lug 11 18:18:23 mulo kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
lug 11 18:18:23 mulo kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.60 BogoMIPS (lpj=1996800)
lug 11 18:18:23 mulo kernel: x86/cpu: SGX disabled or unsupported by BIOS.
lug 11 18:18:23 mulo kernel: CPU0: Thermal monitoring enabled (TM1)
lug 11 18:18:23 mulo kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated
lug 11 18:18:23 mulo kernel: Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
lug 11 18:18:23 mulo kernel: Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
lug 11 18:18:23 mulo kernel: process: using mwait in idle threads
lug 11 18:18:23 mulo kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
lug 11 18:18:23 mulo kernel: Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit
lug 11 18:18:23 mulo kernel: Spectre V2 : Mitigation: Enhanced / Automatic IBRS
lug 11 18:18:23 mulo kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
lug 11 18:18:23 mulo kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
lug 11 18:18:23 mulo kernel: Register File Data Sampling: Mitigation: Clear Register File
lug 11 18:18:23 mulo kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
lug 11 18:18:23 mulo kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
lug 11 18:18:23 mulo kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
lug 11 18:18:23 mulo kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
lug 11 18:18:23 mulo kernel: x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
lug 11 18:18:23 mulo kernel: x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
lug 11 18:18:23 mulo kernel: x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
lug 11 18:18:23 mulo kernel: Freeing SMP alternatives memory: 52K
lug 11 18:18:23 mulo kernel: pid_max: default: 32768 minimum: 301
lug 11 18:18:23 mulo kernel: LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
lug 11 18:18:23 mulo kernel: landlock: Up and running.
lug 11 18:18:23 mulo kernel: Yama: becoming mindful.
lug 11 18:18:23 mulo kernel: LSM support for eBPF active
lug 11 18:18:23 mulo kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
lug 11 18:18:23 mulo kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
lug 11 18:18:23 mulo kernel: smpboot: CPU0: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz (family: 0x6, model: 0x7a, stepping: 0x8)
lug 11 18:18:23 mulo kernel: Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
lug 11 18:18:23 mulo kernel: ... version:                4
lug 11 18:18:23 mulo kernel: ... bit width:              48
lug 11 18:18:23 mulo kernel: ... generic registers:      4
lug 11 18:18:23 mulo kernel: ... value mask:             0000ffffffffffff
lug 11 18:18:23 mulo kernel: ... max period:             00007fffffffffff
lug 11 18:18:23 mulo kernel: ... fixed-purpose events:   3
lug 11 18:18:23 mulo kernel: ... event mask:             000000070000000f
lug 11 18:18:23 mulo kernel: signal: max sigframe size: 2032
lug 11 18:18:23 mulo kernel: Estimated ratio of average max frequency by base frequency (times 1024): 1638
lug 11 18:18:23 mulo kernel: rcu: Hierarchical SRCU implementation.
lug 11 18:18:23 mulo kernel: rcu:         Max phase no-delay instances is 400.
lug 11 18:18:23 mulo kernel: Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
lug 11 18:18:23 mulo kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
lug 11 18:18:23 mulo kernel: smp: Bringing up secondary CPUs ...
lug 11 18:18:23 mulo kernel: smpboot: x86: Booting SMP configuration:
lug 11 18:18:23 mulo kernel: .... node  #0, CPUs:      #1 #2 #3
lug 11 18:18:23 mulo kernel: smp: Brought up 1 node, 4 CPUs
lug 11 18:18:23 mulo kernel: smpboot: Total of 4 processors activated (15974.40 BogoMIPS)
lug 11 18:18:23 mulo kernel: Memory: 7905388K/8220696K available (19692K kernel code, 2940K rwdata, 16520K rodata, 4632K init, 5036K bss, 302888K reserved, 0K cma-reserved)
lug 11 18:18:23 mulo kernel: devtmpfs: initialized
lug 11 18:18:23 mulo kernel: x86/mm: Memory block size: 128MB
lug 11 18:18:23 mulo kernel: ACPI: PM: Registering ACPI NVS region [mem 0x79cc2000-0x79d21fff] (393216 bytes)
lug 11 18:18:23 mulo kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
lug 11 18:18:23 mulo kernel: posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
lug 11 18:18:23 mulo kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
lug 11 18:18:23 mulo kernel: pinctrl core: initialized pinctrl subsystem
lug 11 18:18:23 mulo kernel: PM: RTC time: 16:15:48, date: 2025-07-11
lug 11 18:18:23 mulo kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
lug 11 18:18:23 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
lug 11 18:18:23 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
lug 11 18:18:23 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
lug 11 18:18:23 mulo kernel: audit: initializing netlink subsys (disabled)
lug 11 18:18:23 mulo kernel: audit: type=2000 audit(1752250547.080:1): state=initialized audit_enabled=0 res=1
lug 11 18:18:23 mulo kernel: thermal_sys: Registered thermal governor 'fair_share'
lug 11 18:18:23 mulo kernel: thermal_sys: Registered thermal governor 'bang_bang'
lug 11 18:18:23 mulo kernel: thermal_sys: Registered thermal governor 'step_wise'
lug 11 18:18:23 mulo kernel: thermal_sys: Registered thermal governor 'user_space'
lug 11 18:18:23 mulo kernel: thermal_sys: Registered thermal governor 'power_allocator'
lug 11 18:18:23 mulo kernel: cpuidle: using governor ladder
lug 11 18:18:23 mulo kernel: cpuidle: using governor menu
lug 11 18:18:23 mulo kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
lug 11 18:18:23 mulo kernel: PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
lug 11 18:18:23 mulo kernel: PCI: Using configuration type 1 for base access
lug 11 18:18:23 mulo kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
lug 11 18:18:23 mulo kernel: HugeTLB: allocation took 0ms with hugepage_allocation_threads=1
lug 11 18:18:23 mulo kernel: HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
lug 11 18:18:23 mulo kernel: HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
lug 11 18:18:23 mulo kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
lug 11 18:18:23 mulo kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
lug 11 18:18:23 mulo kernel: raid6: skipped pq benchmark and selected sse2x4
lug 11 18:18:23 mulo kernel: raid6: using ssse3x2 recovery algorithm
lug 11 18:18:23 mulo kernel: ACPI: Added _OSI(Module Device)
lug 11 18:18:23 mulo kernel: ACPI: Added _OSI(Processor Device)
lug 11 18:18:23 mulo kernel: ACPI: Added _OSI(Processor Aggregator Device)
lug 11 18:18:23 mulo kernel: ACPI: 9 ACPI AML tables successfully acquired and loaded
lug 11 18:18:23 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 11 18:18:23 mulo kernel: ACPI: SSDT 0xFFFF89C1C1319E00 000190 (v02 PmRef  Cpu0Cst  00003001 INTL 20160930)
lug 11 18:18:23 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 11 18:18:23 mulo kernel: ACPI: SSDT 0xFFFF89C1C1318000 0001E6 (v02 PmRef  ApIst    00003000 INTL 20160930)
lug 11 18:18:23 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 11 18:18:23 mulo kernel: ACPI: SSDT 0xFFFF89C1C0E6F700 0000C9 (v02 PmRef  ApCst    00003000 INTL 20160930)
lug 11 18:18:23 mulo kernel: ACPI: EC: EC started
lug 11 18:18:23 mulo kernel: ACPI: EC: interrupt blocked
lug 11 18:18:23 mulo kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
lug 11 18:18:23 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC used to handle transactions
lug 11 18:18:23 mulo kernel: ACPI: Interpreter enabled
lug 11 18:18:23 mulo kernel: ACPI: PM: (supports S0 S3 S4 S5)
lug 11 18:18:23 mulo kernel: ACPI: Using IOAPIC for interrupt routing
lug 11 18:18:23 mulo kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
lug 11 18:18:23 mulo kernel: PCI: Using E820 reservations for host bridge windows
lug 11 18:18:23 mulo kernel: ACPI: Enabled 1 GPEs in block 00 to 7F
lug 11 18:18:23 mulo kernel: ACPI: \_SB_.PCI0.RP01.PXSX.DRST: New power resource
lug 11 18:18:23 mulo kernel: ACPI: \_SB_.PCI0.RP02.PXSX.DRST: New power resource
lug 11 18:18:23 mulo kernel: ACPI: \_SB_.PCI0.RP03.PXSX.DRST: New power resource
lug 11 18:18:23 mulo kernel: ACPI: \_SB_.PCI0.RP04.PXSX.DRST: New power resource
lug 11 18:18:23 mulo kernel: ACPI: \_SB_.PCI0.RP05.PXSX.DRST: New power resource
lug 11 18:18:23 mulo kernel: ACPI: \_SB_.PCI0.RP06.PXSX.DRST: New power resource
lug 11 18:18:23 mulo kernel: ACPI: \_SB_.PCI0.CNVW.WRST: New power resource
lug 11 18:18:23 mulo kernel: ACPI: \_TZ_.FN00: New power resource
lug 11 18:18:23 mulo kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
lug 11 18:18:23 mulo kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
lug 11 18:18:23 mulo kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
lug 11 18:18:23 mulo kernel: PCI host bridge to bus 0000:00
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [mem 0x7c000001-0xcfffffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
lug 11 18:18:23 mulo kernel: pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000 conventional PCI endpoint
lug 11 18:18:23 mulo kernel: pci 0000:00:02.0: [8086:3184] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
lug 11 18:18:23 mulo kernel: pci 0000:00:02.0: BAR 0 [mem 0xa0000000-0xa0ffffff 64bit]
lug 11 18:18:23 mulo kernel: pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref]
lug 11 18:18:23 mulo kernel: pci 0000:00:02.0: BAR 4 [io  0xf000-0xf03f]
lug 11 18:18:23 mulo kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
lug 11 18:18:23 mulo kernel: pci 0000:00:0c.0: [8086:31dc] type 00 class 0x028000 PCIe Root Complex Integrated Endpoint
lug 11 18:18:23 mulo kernel: pci 0000:00:0c.0: BAR 0 [mem 0xa1314000-0xa1317fff 64bit]
lug 11 18:18:23 mulo kernel: pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
lug 11 18:18:23 mulo kernel: pci 0000:00:0e.0: [8086:3198] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
lug 11 18:18:23 mulo kernel: pci 0000:00:0e.0: BAR 0 [mem 0xa1310000-0xa1313fff 64bit]
lug 11 18:18:23 mulo kernel: pci 0000:00:0e.0: BAR 4 [mem 0xa1000000-0xa10fffff 64bit]
lug 11 18:18:23 mulo kernel: pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
lug 11 18:18:23 mulo kernel: pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000 conventional PCI endpoint
lug 11 18:18:23 mulo kernel: pci 0000:00:0f.0: BAR 0 [mem 0xa131f000-0xa131ffff 64bit]
lug 11 18:18:23 mulo kernel: pci 0000:00:0f.0: PME# supported from D3hot
lug 11 18:18:23 mulo kernel: pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601 conventional PCI endpoint
lug 11 18:18:23 mulo kernel: pci 0000:00:12.0: BAR 0 [mem 0xa1318000-0xa1319fff]
lug 11 18:18:23 mulo kernel: pci 0000:00:12.0: BAR 1 [mem 0xa131e000-0xa131e0ff]
lug 11 18:18:23 mulo kernel: pci 0000:00:12.0: BAR 2 [io  0xf090-0xf097]
lug 11 18:18:23 mulo kernel: pci 0000:00:12.0: BAR 3 [io  0xf080-0xf083]
lug 11 18:18:23 mulo kernel: pci 0000:00:12.0: BAR 4 [io  0xf060-0xf07f]
lug 11 18:18:23 mulo kernel: pci 0000:00:12.0: BAR 5 [mem 0xa131d000-0xa131d7ff]
lug 11 18:18:23 mulo kernel: pci 0000:00:12.0: PME# supported from D3hot
lug 11 18:18:23 mulo kernel: pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400 PCIe Root Port
lug 11 18:18:23 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 11 18:18:23 mulo kernel: pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
lug 11 18:18:23 mulo kernel: pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
lug 11 18:18:23 mulo kernel: pci 0000:00:13.2: [8086:31da] type 01 class 0x060400 PCIe Root Port
lug 11 18:18:23 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 11 18:18:23 mulo kernel: pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
lug 11 18:18:23 mulo kernel: pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
lug 11 18:18:23 mulo kernel: pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
lug 11 18:18:23 mulo kernel: pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330 conventional PCI endpoint
lug 11 18:18:23 mulo kernel: pci 0000:00:15.0: BAR 0 [mem 0xa1300000-0xa130ffff 64bit]
lug 11 18:18:23 mulo kernel: pci 0000:00:15.0: PME# supported from D3hot D3cold
lug 11 18:18:23 mulo kernel: pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501 conventional PCI endpoint
lug 11 18:18:23 mulo kernel: pci 0000:00:1c.0: BAR 0 [mem 0xa131c000-0xa131cfff 64bit]
lug 11 18:18:23 mulo kernel: pci 0000:00:1c.0: BAR 2 [mem 0xa131b000-0xa131bfff 64bit]
lug 11 18:18:23 mulo kernel: pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100 conventional PCI endpoint
lug 11 18:18:23 mulo kernel: pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500 conventional PCI endpoint
lug 11 18:18:23 mulo kernel: pci 0000:00:1f.1: BAR 0 [mem 0xa131a000-0xa131a0ff 64bit]
lug 11 18:18:23 mulo kernel: pci 0000:00:1f.1: BAR 4 [io  0xf040-0xf05f]
lug 11 18:18:23 mulo kernel: pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000 PCIe Endpoint
lug 11 18:18:23 mulo kernel: pci 0000:01:00.0: BAR 0 [mem 0xa1200000-0xa1200fff]
lug 11 18:18:23 mulo kernel: pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
lug 11 18:18:23 mulo kernel: pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
lug 11 18:18:23 mulo kernel: pci 0000:01:00.0: supports D1 D2
lug 11 18:18:23 mulo kernel: pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
lug 11 18:18:23 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 11 18:18:23 mulo kernel: pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
lug 11 18:18:23 mulo kernel: pci 0000:02:00.0: BAR 0 [io  0xe000-0xe0ff]
lug 11 18:18:23 mulo kernel: pci 0000:02:00.0: BAR 2 [mem 0xa1104000-0xa1104fff 64bit]
lug 11 18:18:23 mulo kernel: pci 0000:02:00.0: BAR 4 [mem 0xa1100000-0xa1103fff 64bit]
lug 11 18:18:23 mulo kernel: pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
lug 11 18:18:23 mulo kernel: pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128)
lug 11 18:18:23 mulo kernel: pci 0000:02:00.0: supports D1 D2
lug 11 18:18:23 mulo kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
lug 11 18:18:23 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 11 18:18:23 mulo kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 3
lug 11 18:18:23 mulo kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 4
lug 11 18:18:23 mulo kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 5
lug 11 18:18:23 mulo kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 6
lug 11 18:18:23 mulo kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 7
lug 11 18:18:23 mulo kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 9
lug 11 18:18:23 mulo kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 10
lug 11 18:18:23 mulo kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 11
lug 11 18:18:23 mulo kernel: ACPI: EC: interrupt unblocked
lug 11 18:18:23 mulo kernel: ACPI: EC: event unblocked
lug 11 18:18:23 mulo kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
lug 11 18:18:23 mulo kernel: ACPI: EC: GPE=0x22
lug 11 18:18:23 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC initialization complete
lug 11 18:18:23 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: EC: Used to handle transactions and events
lug 11 18:18:23 mulo kernel: iommu: Default domain type: Translated
lug 11 18:18:23 mulo kernel: iommu: DMA domain TLB invalidation policy: lazy mode
lug 11 18:18:23 mulo kernel: SCSI subsystem initialized
lug 11 18:18:23 mulo kernel: libata version 3.00 loaded.
lug 11 18:18:23 mulo kernel: ACPI: bus type USB registered
lug 11 18:18:23 mulo kernel: usbcore: registered new interface driver usbfs
lug 11 18:18:23 mulo kernel: usbcore: registered new interface driver hub
lug 11 18:18:23 mulo kernel: usbcore: registered new device driver usb
lug 11 18:18:23 mulo kernel: EDAC MC: Ver: 3.0.0
lug 11 18:18:23 mulo kernel: efivars: Registered efivars operations
lug 11 18:18:23 mulo kernel: NetLabel: Initializing
lug 11 18:18:23 mulo kernel: NetLabel:  domain hash size = 128
lug 11 18:18:23 mulo kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
lug 11 18:18:23 mulo kernel: NetLabel:  unlabeled traffic allowed by default
lug 11 18:18:23 mulo kernel: mctp: management component transport protocol core
lug 11 18:18:23 mulo kernel: NET: Registered PF_MCTP protocol family
lug 11 18:18:23 mulo kernel: PCI: Using ACPI for IRQ routing
lug 11 18:18:23 mulo kernel: PCI: pci_cache_line_size set to 64 bytes
lug 11 18:18:23 mulo kernel: resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00
lug 11 18:18:23 mulo kernel: e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
lug 11 18:18:23 mulo kernel: e820: reserve RAM buffer [mem 0x00059000-0x0005ffff]
lug 11 18:18:23 mulo kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
lug 11 18:18:23 mulo kernel: e820: reserve RAM buffer [mem 0x73d75000-0x73ffffff]
lug 11 18:18:23 mulo kernel: e820: reserve RAM buffer [mem 0x773d9000-0x77ffffff]
lug 11 18:18:23 mulo kernel: e820: reserve RAM buffer [mem 0x7a565000-0x7bffffff]
lug 11 18:18:23 mulo kernel: e820: reserve RAM buffer [mem 0x7ac00000-0x7bffffff]
lug 11 18:18:23 mulo kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device
lug 11 18:18:23 mulo kernel: pci 0000:00:02.0: vgaarb: bridge control possible
lug 11 18:18:23 mulo kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
lug 11 18:18:23 mulo kernel: vgaarb: loaded
lug 11 18:18:23 mulo kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
lug 11 18:18:23 mulo kernel: hpet0: 8 comparators, 64-bit 19.200000 MHz counter
lug 11 18:18:23 mulo kernel: clocksource: Switched to clocksource tsc-early
lug 11 18:18:23 mulo kernel: VFS: Disk quotas dquot_6.6.0
lug 11 18:18:23 mulo kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
lug 11 18:18:23 mulo kernel: pnp: PnP ACPI init
lug 11 18:18:23 mulo kernel: system 00:00: [io  0x0a00-0x0a1f] has been reserved
lug 11 18:18:23 mulo kernel: system 00:00: [io  0x0a20-0x0a2f] has been reserved
lug 11 18:18:23 mulo kernel: system 00:00: [io  0x0a30-0x0a3f] has been reserved
lug 11 18:18:23 mulo kernel: system 00:00: [io  0x0a40-0x0a4f] has been reserved
lug 11 18:18:23 mulo kernel: system 00:00: [io  0x0a50-0x0a5f] has been reserved
lug 11 18:18:23 mulo kernel: system 00:00: [io  0x0a60-0x0a6f] has been reserved
lug 11 18:18:23 mulo kernel: system 00:01: [io  0x0680-0x069f] has been reserved
lug 11 18:18:23 mulo kernel: system 00:01: [io  0x0400-0x047f] could not be reserved
lug 11 18:18:23 mulo kernel: system 00:01: [io  0x0500-0x05fe] has been reserved
lug 11 18:18:23 mulo kernel: system 00:01: [io  0x0600-0x061f] has been reserved
lug 11 18:18:23 mulo kernel: system 00:01: [io  0x164e-0x164f] has been reserved
lug 11 18:18:23 mulo kernel: system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
lug 11 18:18:23 mulo kernel: system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
lug 11 18:18:23 mulo kernel: system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
lug 11 18:18:23 mulo kernel: system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
lug 11 18:18:23 mulo kernel: system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
lug 11 18:18:23 mulo kernel: system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
lug 11 18:18:23 mulo kernel: system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
lug 11 18:18:23 mulo kernel: system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
lug 11 18:18:23 mulo kernel: system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
lug 11 18:18:23 mulo kernel: pnp: PnP ACPI: found 4 devices
lug 11 18:18:23 mulo kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
lug 11 18:18:23 mulo kernel: NET: Registered PF_INET protocol family
lug 11 18:18:23 mulo kernel: IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
lug 11 18:18:23 mulo kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
lug 11 18:18:23 mulo kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
lug 11 18:18:23 mulo kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
lug 11 18:18:23 mulo kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
lug 11 18:18:23 mulo kernel: TCP: Hash tables configured (established 65536 bind 65536)
lug 11 18:18:23 mulo kernel: MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
lug 11 18:18:23 mulo kernel: UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
lug 11 18:18:23 mulo kernel: UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
lug 11 18:18:23 mulo kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
lug 11 18:18:23 mulo kernel: NET: Registered PF_XDP protocol family
lug 11 18:18:23 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 11 18:18:23 mulo kernel: pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
lug 11 18:18:23 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 11 18:18:23 mulo kernel: pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
lug 11 18:18:23 mulo kernel: pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 9 [mem 0x7c000001-0xcfffffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 10 [mem 0xe0000000-0xefffffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 11 [mem 0xfea00000-0xfeafffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 12 [mem 0xfed00000-0xfed003ff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 13 [mem 0xfed01000-0xfed01fff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 14 [mem 0xfed03000-0xfed03fff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 15 [mem 0xfed06000-0xfed06fff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 16 [mem 0xfed08000-0xfed09fff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 17 [mem 0xfed80000-0xfedbffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 18 [mem 0xfed1c000-0xfed1cfff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:00: resource 19 [mem 0xfee00000-0xfeefffff window]
lug 11 18:18:23 mulo kernel: pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff]
lug 11 18:18:23 mulo kernel: pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
lug 11 18:18:23 mulo kernel: pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa11fffff]
lug 11 18:18:23 mulo kernel: PCI: CLS 64 bytes, default 64
lug 11 18:18:23 mulo kernel: pci 0000:00:0d.0: [8086:3192] type 00 class 0x058000 conventional PCI endpoint
lug 11 18:18:23 mulo kernel: pci 0000:00:0d.0: BAR 0 [mem 0xd0000000-0xd0ffffff 64bit]
lug 11 18:18:23 mulo kernel: pci 0000:00:0d.2: [8086:3196] type 00 class 0x0c8000 conventional PCI endpoint
lug 11 18:18:23 mulo kernel: pci 0000:00:0d.2: BAR 0 [mem 0xfed01000-0xfed01fff]
lug 11 18:18:23 mulo kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
lug 11 18:18:23 mulo kernel: software IO TLB: mapped [mem 0x000000006ede3000-0x0000000072de3000] (64MB)
lug 11 18:18:23 mulo kernel: Trying to unpack rootfs image as initramfs...
lug 11 18:18:23 mulo kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
lug 11 18:18:23 mulo kernel: clocksource: Switched to clocksource tsc
lug 11 18:18:23 mulo kernel: Initialise system trusted keyrings
lug 11 18:18:23 mulo kernel: Key type blacklist registered
lug 11 18:18:23 mulo kernel: workingset: timestamp_bits=36 max_order=21 bucket_order=0
lug 11 18:18:23 mulo kernel: fuse: init (API version 7.43)
lug 11 18:18:23 mulo kernel: integrity: Platform Keyring initialized
lug 11 18:18:23 mulo kernel: integrity: Machine keyring initialized
lug 11 18:18:23 mulo kernel: xor: measuring software checksum speed
lug 11 18:18:23 mulo kernel:    prefetch64-sse  : 10684 MB/sec
lug 11 18:18:23 mulo kernel:    generic_sse     :  9160 MB/sec
lug 11 18:18:23 mulo kernel: xor: using function: prefetch64-sse (10684 MB/sec)
lug 11 18:18:23 mulo kernel: Key type asymmetric registered
lug 11 18:18:23 mulo kernel: Asymmetric key parser 'x509' registered
lug 11 18:18:23 mulo kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
lug 11 18:18:23 mulo kernel: io scheduler mq-deadline registered
lug 11 18:18:23 mulo kernel: io scheduler kyber registered
lug 11 18:18:23 mulo kernel: io scheduler bfq registered
lug 11 18:18:23 mulo kernel: ledtrig-cpu: registered to indicate activity on CPUs
lug 11 18:18:23 mulo kernel: pcieport 0000:00:13.0: PME: Signaling with IRQ 120
lug 11 18:18:23 mulo kernel: pcieport 0000:00:13.2: PME: Signaling with IRQ 121
lug 11 18:18:23 mulo kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
lug 11 18:18:23 mulo kernel: ACPI: button: Power Button [PWRB]
lug 11 18:18:23 mulo kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
lug 11 18:18:23 mulo kernel: ACPI: button: Sleep Button [SLPB]
lug 11 18:18:23 mulo kernel: thermal LNXTHERM:00: registered as thermal_zone0
lug 11 18:18:23 mulo kernel: ACPI: thermal: Thermal Zone [TZ01] (47 C)
lug 11 18:18:23 mulo kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
lug 11 18:18:23 mulo kernel: Non-volatile memory driver v1.3
lug 11 18:18:23 mulo kernel: Linux agpgart interface v0.103
lug 11 18:18:23 mulo kernel: ACPI: bus type drm_connector registered
lug 11 18:18:23 mulo kernel: ahci 0000:00:12.0: version 3.0
lug 11 18:18:23 mulo kernel: ahci 0000:00:12.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
lug 11 18:18:23 mulo kernel: ahci 0000:00:12.0: 2/2 ports implemented (port mask 0x3)
lug 11 18:18:23 mulo kernel: ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst 
lug 11 18:18:23 mulo kernel: scsi host0: ahci
lug 11 18:18:23 mulo kernel: scsi host1: ahci
lug 11 18:18:23 mulo kernel: ata1: SATA max UDMA/133 abar m2048@0xa131d000 port 0xa131d100 irq 122 lpm-pol 3
lug 11 18:18:23 mulo kernel: ata2: SATA max UDMA/133 abar m2048@0xa131d000 port 0xa131d180 irq 122 lpm-pol 3
lug 11 18:18:23 mulo kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
lug 11 18:18:23 mulo kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
lug 11 18:18:23 mulo kernel: xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
lug 11 18:18:23 mulo kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
lug 11 18:18:23 mulo kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
lug 11 18:18:23 mulo kernel: xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
lug 11 18:18:23 mulo kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.15
lug 11 18:18:23 mulo kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
lug 11 18:18:23 mulo kernel: usb usb1: Product: xHCI Host Controller
lug 11 18:18:23 mulo kernel: usb usb1: Manufacturer: Linux 6.15.5-arch1-1 xhci-hcd
lug 11 18:18:23 mulo kernel: usb usb1: SerialNumber: 0000:00:15.0
lug 11 18:18:23 mulo kernel: hub 1-0:1.0: USB hub found
lug 11 18:18:23 mulo kernel: hub 1-0:1.0: 9 ports detected
lug 11 18:18:23 mulo kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.15
lug 11 18:18:23 mulo kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
lug 11 18:18:23 mulo kernel: usb usb2: Product: xHCI Host Controller
lug 11 18:18:23 mulo kernel: usb usb2: Manufacturer: Linux 6.15.5-arch1-1 xhci-hcd
lug 11 18:18:23 mulo kernel: usb usb2: SerialNumber: 0000:00:15.0
lug 11 18:18:23 mulo kernel: hub 2-0:1.0: USB hub found
lug 11 18:18:23 mulo kernel: hub 2-0:1.0: 7 ports detected
lug 11 18:18:23 mulo kernel: usbcore: registered new interface driver usbserial_generic
lug 11 18:18:23 mulo kernel: usbserial: USB Serial support registered for generic
lug 11 18:18:23 mulo kernel: i8042: PNP: No PS/2 controller found.
lug 11 18:18:23 mulo kernel: i8042: Probing ports directly.
lug 11 18:18:23 mulo kernel: Freeing initrd memory: 31028K
lug 11 18:18:23 mulo kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
lug 11 18:18:23 mulo kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
lug 11 18:18:23 mulo kernel: rtc_cmos 00:03: RTC can wake from S4
lug 11 18:18:23 mulo kernel: rtc_cmos 00:03: registered as rtc0
lug 11 18:18:23 mulo kernel: rtc_cmos 00:03: setting system clock to 2025-07-11T16:15:48 UTC (1752250548)
lug 11 18:18:23 mulo kernel: rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
lug 11 18:18:23 mulo kernel: intel_pstate: Intel P-state driver initializing
lug 11 18:18:23 mulo kernel: simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
lug 11 18:18:23 mulo kernel: [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
lug 11 18:18:23 mulo kernel: fbcon: Deferring console take-over
lug 11 18:18:23 mulo kernel: simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
lug 11 18:18:23 mulo kernel: hid: raw HID events driver (C) Jiri Kosina
lug 11 18:18:23 mulo kernel: usbcore: registered new interface driver usbhid
lug 11 18:18:23 mulo kernel: usbhid: USB HID core driver
lug 11 18:18:23 mulo kernel: drop_monitor: Initializing network drop monitor service
lug 11 18:18:23 mulo kernel: NET: Registered PF_INET6 protocol family
lug 11 18:18:23 mulo kernel: Segment Routing with IPv6
lug 11 18:18:23 mulo kernel: RPL Segment Routing with IPv6
lug 11 18:18:23 mulo kernel: In-situ OAM (IOAM) with IPv6
lug 11 18:18:23 mulo kernel: NET: Registered PF_PACKET protocol family
lug 11 18:18:23 mulo kernel: microcode: Current revision: 0x00000026
lug 11 18:18:23 mulo kernel: microcode: Updated early from: 0x0000001a
lug 11 18:18:23 mulo kernel: resctrl: L2 allocation detected
lug 11 18:18:23 mulo kernel: IPI shorthand broadcast: enabled
lug 11 18:18:23 mulo kernel: sched_clock: Marking stable (585000870, 3696381)->(590431802, -1734551)
lug 11 18:18:23 mulo kernel: registered taskstats version 1
lug 11 18:18:23 mulo kernel: Loading compiled-in X.509 certificates
lug 11 18:18:23 mulo kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 90fa369bf4d442a6e0448ba5d711f991b34969ee'
lug 11 18:18:23 mulo kernel: zswap: loaded using pool zstd/zsmalloc
lug 11 18:18:23 mulo kernel: Demotion targets for Node 0: null
lug 11 18:18:23 mulo kernel: Key type .fscrypt registered
lug 11 18:18:23 mulo kernel: Key type fscrypt-provisioning registered
lug 11 18:18:23 mulo kernel: Btrfs loaded, zoned=yes, fsverity=yes
lug 11 18:18:23 mulo kernel: Key type big_key registered
lug 11 18:18:23 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 11 18:18:23 mulo kernel: integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
lug 11 18:18:23 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 11 18:18:23 mulo kernel: integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
lug 11 18:18:23 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 11 18:18:23 mulo kernel: integrity: Loaded X.509 cert 'CISD FW Update - Certificate: 068268b4a41c93854262d49b4f788f13'
lug 11 18:18:23 mulo kernel: input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
lug 11 18:18:23 mulo kernel: PM:   Magic number: 1:250:287
lug 11 18:18:23 mulo kernel: tty tty20: hash matches
lug 11 18:18:23 mulo kernel: RAS: Correctable Errors collector initialized.
lug 11 18:18:23 mulo kernel: clk: Disabling unused clocks
lug 11 18:18:23 mulo kernel: PM: genpd: Disabling unused power domains
lug 11 18:18:23 mulo kernel: usb 1-2: new high-speed USB device number 2 using xhci_hcd
lug 11 18:18:23 mulo kernel: ata2: SATA link down (SStatus 4 SControl 300)
lug 11 18:18:23 mulo kernel: usb 1-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 0.03
lug 11 18:18:23 mulo kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 11 18:18:23 mulo kernel: usb 1-2: Product: USB2.1 Hub
lug 11 18:18:23 mulo kernel: usb 1-2: Manufacturer: Generic
lug 11 18:18:23 mulo kernel: hub 1-2:1.0: USB hub found
lug 11 18:18:23 mulo kernel: hub 1-2:1.0: 4 ports detected
lug 11 18:18:23 mulo kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
lug 11 18:18:23 mulo kernel: ata1.00: Model 'Samsung SSD 860 EVO 250GB', rev 'RVT01B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
lug 11 18:18:23 mulo kernel: ata1.00: supports DRM functions and may not be fully accessible
lug 11 18:18:23 mulo kernel: ata1.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
lug 11 18:18:23 mulo kernel: ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
lug 11 18:18:23 mulo kernel: ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
lug 11 18:18:23 mulo kernel: ata1.00: supports DRM functions and may not be fully accessible
lug 11 18:18:23 mulo kernel: ata1.00: configured for UDMA/133
lug 11 18:18:23 mulo kernel: usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
lug 11 18:18:23 mulo kernel: ahci 0000:00:12.0: port does not support device sleep
lug 11 18:18:23 mulo kernel: scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
lug 11 18:18:23 mulo kernel: ata1.00: Enabling discard_zeroes_data
lug 11 18:18:23 mulo kernel: sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
lug 11 18:18:23 mulo kernel: sd 0:0:0:0: [sda] Write Protect is off
lug 11 18:18:23 mulo kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
lug 11 18:18:23 mulo kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 18:18:23 mulo kernel: sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
lug 11 18:18:23 mulo kernel: ata1.00: Enabling discard_zeroes_data
lug 11 18:18:23 mulo kernel: usb 2-1: New USB device found, idVendor=152d, idProduct=0576, bcdDevice=41.01
lug 11 18:18:23 mulo kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
lug 11 18:18:23 mulo kernel: usb 2-1: Product: ANKEJE USB3.0
lug 11 18:18:23 mulo kernel: usb 2-1: Manufacturer: ANKEJE USB3.0
lug 11 18:18:23 mulo kernel: usb 2-1: SerialNumber: DD56419883014
lug 11 18:18:23 mulo kernel:  sda: sda1 sda2
lug 11 18:18:23 mulo kernel: sd 0:0:0:0: [sda] supports TCG Opal
lug 11 18:18:23 mulo kernel: sd 0:0:0:0: [sda] Attached SCSI disk
lug 11 18:18:23 mulo kernel: Freeing unused decrypted memory: 2028K
lug 11 18:18:23 mulo kernel: Freeing unused kernel image (initmem) memory: 4632K
lug 11 18:18:23 mulo kernel: Write protecting the kernel read-only data: 38912k
lug 11 18:18:23 mulo kernel: Freeing unused kernel image (text/rodata gap) memory: 784K
lug 11 18:18:23 mulo kernel: Freeing unused kernel image (rodata/data gap) memory: 1912K
lug 11 18:18:23 mulo kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
lug 11 18:18:23 mulo kernel: rodata_test: all tests were successful
lug 11 18:18:23 mulo kernel: Run /init as init process
lug 11 18:18:23 mulo kernel:   with arguments:
lug 11 18:18:23 mulo kernel:     /init
lug 11 18:18:23 mulo kernel:   with environment:
lug 11 18:18:23 mulo kernel:     HOME=/
lug 11 18:18:23 mulo kernel:     TERM=linux
lug 11 18:18:23 mulo kernel:     BOOT_IMAGE=/vmlinuz-linux
lug 11 18:18:23 mulo kernel:     cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm
lug 11 18:18:23 mulo kernel: usb 1-9: new full-speed USB device number 3 using xhci_hcd
lug 11 18:18:23 mulo kernel: usb 1-9: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
lug 11 18:18:23 mulo kernel: usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
lug 11 18:18:23 mulo kernel: rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
lug 11 18:18:23 mulo kernel: cryptd: max_cpu_qlen set to 1000
lug 11 18:18:23 mulo kernel: sdhci: Secure Digital Host Controller Interface driver
lug 11 18:18:23 mulo kernel: sdhci: Copyright(c) Pierre Ossman
lug 11 18:18:23 mulo kernel: sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 6)
lug 11 18:18:23 mulo kernel: mmc0: CQHCI version 5.10
lug 11 18:18:23 mulo kernel: mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
lug 11 18:18:23 mulo kernel: usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
lug 11 18:18:23 mulo kernel: usb 2-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 0.03
lug 11 18:18:23 mulo kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 11 18:18:23 mulo kernel: usb 2-2: Product: USB3.2 Hub
lug 11 18:18:23 mulo kernel: usb 2-2: Manufacturer: Generic
lug 11 18:18:23 mulo kernel: hub 2-2:1.0: USB hub found
lug 11 18:18:23 mulo kernel: hub 2-2:1.0: 4 ports detected
lug 11 18:18:23 mulo kernel: usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
lug 11 18:18:23 mulo kernel: mmc0: Failed to initialize a non-removable card
lug 11 18:18:23 mulo kernel: usb 1-2.1: New USB device found, idVendor=1997, idProduct=2433, bcdDevice=20.12
lug 11 18:18:23 mulo kernel: usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 11 18:18:23 mulo kernel: usb 1-2.1: Product: Mini Keyboard
lug 11 18:18:23 mulo kernel: usb 1-2.1: Manufacturer:  
lug 11 18:18:23 mulo kernel: input:   Mini Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:1997:2433.0001/input/input4
lug 11 18:18:23 mulo kernel: hid-generic 0003:1997:2433.0001: input,hidraw0: USB HID v1.01 Keyboard [  Mini Keyboard] on usb-0000:00:15.0-2.1/input0
lug 11 18:18:23 mulo kernel: input:   Mini Keyboard Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input5
lug 11 18:18:23 mulo kernel: input:   Mini Keyboard System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input6
lug 11 18:18:23 mulo kernel: usb 2-3: new SuperSpeed USB device number 4 using xhci_hcd
lug 11 18:18:23 mulo kernel: usb 2-3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 11 18:18:23 mulo kernel: usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 18:18:23 mulo kernel: usb 2-3: Product: Ugreen Storage Device
lug 11 18:18:23 mulo kernel: usb 2-3: Manufacturer: Ugreen
lug 11 18:18:23 mulo kernel: usb 2-3: SerialNumber: 022004019C85
lug 11 18:18:23 mulo kernel: input:   Mini Keyboard Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:1997:2433.0002/input/input7
lug 11 18:18:23 mulo kernel: hid-generic 0003:1997:2433.0002: input,hidraw1: USB HID v1.01 Mouse [  Mini Keyboard] on usb-0000:00:15.0-2.1/input1
lug 11 18:18:23 mulo kernel: usb 2-2.2: new SuperSpeed USB device number 5 using xhci_hcd
lug 11 18:18:23 mulo kernel: usb 2-2.2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 11 18:18:23 mulo kernel: usb 2-2.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 18:18:23 mulo kernel: usb 2-2.2: Product: ASM105x
lug 11 18:18:23 mulo kernel: usb 2-2.2: Manufacturer: ASMT
lug 11 18:18:23 mulo kernel: usb 2-2.2: SerialNumber: 12345679818C
lug 11 18:18:23 mulo kernel: usb 2-4: new SuperSpeed USB device number 6 using xhci_hcd
lug 11 18:18:23 mulo kernel: usb 2-4: New USB device found, idVendor=1058, idProduct=1230, bcdDevice=10.50
lug 11 18:18:23 mulo kernel: usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 18:18:23 mulo kernel: usb 2-4: Product: My Book 1230
lug 11 18:18:23 mulo kernel: usb 2-4: Manufacturer: Western Digital
lug 11 18:18:23 mulo kernel: usb 2-4: SerialNumber: 574343344530393137333939
lug 11 18:18:23 mulo kernel: usb 2-1: UAS is ignored for this device, using usb-storage instead
lug 11 18:18:23 mulo kernel: usb-storage 2-1:1.0: USB Mass Storage device detected
lug 11 18:18:23 mulo kernel: usb-storage 2-1:1.0: Quirks match for vid 152d pid 0576: 800000
lug 11 18:18:23 mulo kernel: scsi host2: usb-storage 2-1:1.0
lug 11 18:18:23 mulo kernel: usb 2-3: UAS is ignored for this device, using usb-storage instead
lug 11 18:18:23 mulo kernel: usb-storage 2-3:1.0: USB Mass Storage device detected
lug 11 18:18:23 mulo kernel: usb-storage 2-3:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 11 18:18:23 mulo kernel: scsi host3: usb-storage 2-3:1.0
lug 11 18:18:23 mulo kernel: usb 2-2.2: UAS is ignored for this device, using usb-storage instead
lug 11 18:18:23 mulo kernel: usb-storage 2-2.2:1.0: USB Mass Storage device detected
lug 11 18:18:23 mulo kernel: usb-storage 2-2.2:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 11 18:18:23 mulo kernel: scsi host4: usb-storage 2-2.2:1.0
lug 11 18:18:23 mulo kernel: usb-storage 2-4:1.0: USB Mass Storage device detected
lug 11 18:18:23 mulo kernel: usb-storage 2-4:1.0: Quirks match for vid 1058 pid 1230: 800000
lug 11 18:18:23 mulo kernel: scsi host5: usb-storage 2-4:1.0
lug 11 18:18:23 mulo kernel: usbcore: registered new interface driver usb-storage
lug 11 18:18:23 mulo kernel: usbcore: registered new interface driver uas
lug 11 18:18:23 mulo kernel: device-mapper: uevent: version 1.0.3
lug 11 18:18:23 mulo kernel: device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
lug 11 18:18:23 mulo kernel: Key type encrypted registered
lug 11 18:18:23 mulo kernel: fbcon: Taking over console
lug 11 18:18:23 mulo kernel: Console: switching to colour frame buffer device 128x48
lug 11 18:18:23 mulo kernel: scsi 3:0:0:0: Direct-Access     TOSHIBA  MQ01ABD100       0    PQ: 0 ANSI: 6
lug 11 18:18:23 mulo kernel: scsi 5:0:0:0: Direct-Access     WD       My Book 1230     1050 PQ: 0 ANSI: 6
lug 11 18:18:23 mulo kernel: scsi 4:0:0:0: Direct-Access     ASMT     ASM105x          0    PQ: 0 ANSI: 6
lug 11 18:18:23 mulo kernel: scsi 2:0:0:0: Direct-Access     ANKEJE   USB3.0           4101 PQ: 0 ANSI: 6
lug 11 18:18:23 mulo kernel: scsi 5:0:0:1: Enclosure         WD       SES Device       1050 PQ: 0 ANSI: 6
lug 11 18:18:23 mulo kernel: sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 11 18:18:23 mulo kernel: sd 4:0:0:0: [sdc] 4096-byte physical blocks
lug 11 18:18:23 mulo kernel: sd 5:0:0:0: [sdb] 976746240 4096-byte logical blocks: (4.00 TB/3.64 TiB)
lug 11 18:18:23 mulo kernel: sd 4:0:0:0: [sdc] Write Protect is off
lug 11 18:18:23 mulo kernel: sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
lug 11 18:18:23 mulo kernel: sd 5:0:0:0: [sdb] Write Protect is off
lug 11 18:18:23 mulo kernel: sd 5:0:0:0: [sdb] Mode Sense: 53 00 10 08
lug 11 18:18:23 mulo kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 18:18:23 mulo kernel: sd 5:0:0:0: [sdb] No Caching mode page found
lug 11 18:18:23 mulo kernel: sd 5:0:0:0: [sdb] Assuming drive cache: write through
lug 11 18:18:23 mulo kernel: sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 11 18:18:23 mulo kernel: sd 3:0:0:0: [sdd] 4096-byte physical blocks
lug 11 18:18:23 mulo kernel: sd 3:0:0:0: [sdd] Write Protect is off
lug 11 18:18:23 mulo kernel: sd 3:0:0:0: [sdd] Mode Sense: 43 00 00 00
lug 11 18:18:23 mulo kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 18:18:23 mulo kernel: sd 2:0:0:0: [sde] 500118192 512-byte logical blocks: (256 GB/238 GiB)
lug 11 18:18:23 mulo kernel: sd 2:0:0:0: [sde] Write Protect is off
lug 11 18:18:23 mulo kernel: sd 2:0:0:0: [sde] Mode Sense: 47 00 00 08
lug 11 18:18:23 mulo kernel: sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 18:18:23 mulo kernel:  sdc: sdc1
lug 11 18:18:23 mulo kernel: sd 4:0:0:0: [sdc] Attached SCSI disk
lug 11 18:18:23 mulo kernel:  sdb: sdb1
lug 11 18:18:23 mulo kernel: sd 5:0:0:0: [sdb] Attached SCSI disk
lug 11 18:18:23 mulo kernel:  sde: sde1
lug 11 18:18:23 mulo kernel: sd 2:0:0:0: [sde] Attached SCSI disk
lug 11 18:18:23 mulo kernel:  sdd: sdd1
lug 11 18:18:23 mulo kernel: sd 3:0:0:0: [sdd] Attached SCSI disk
lug 11 18:18:23 mulo kernel: scsi 5:0:0:1: Failed to get diagnostic page 0x1
lug 11 18:18:23 mulo kernel: scsi 5:0:0:1: Failed to bind enclosure -19
lug 11 18:18:23 mulo kernel: ses 5:0:0:1: Attached Enclosure device
lug 11 18:18:23 mulo kernel: EXT4-fs (dm-1): mounted filesystem 16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12 r/w with ordered data mode. Quota mode: none.
lug 11 18:18:23 mulo systemd[1]: systemd 257.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
lug 11 18:18:23 mulo systemd[1]: Detected architecture x86-64.
lug 11 18:18:23 mulo systemd[1]: Hostname set to <mulo>.
lug 11 18:18:23 mulo systemd[1]: bpf-restrict-fs: LSM BPF program attached
lug 11 18:18:23 mulo systemd[1]: Queued start job for default target Graphical Interface.
lug 11 18:18:23 mulo systemd[1]: Created slice Slice /system/dirmngr.
lug 11 18:18:23 mulo systemd[1]: Created slice Slice /system/getty.
lug 11 18:18:23 mulo systemd[1]: Created slice Slice /system/gpg-agent.
lug 11 18:18:23 mulo systemd[1]: Created slice Slice /system/gpg-agent-browser.
lug 11 18:18:23 mulo systemd[1]: Created slice Slice /system/gpg-agent-extra.
lug 11 18:18:23 mulo systemd[1]: Created slice Slice /system/gpg-agent-ssh.
lug 11 18:18:23 mulo systemd[1]: Created slice Slice /system/keyboxd.
lug 11 18:18:23 mulo systemd[1]: Created slice Slice /system/modprobe.
lug 11 18:18:23 mulo systemd[1]: Created slice Encrypted Volume Units Service Slice.
lug 11 18:18:23 mulo systemd[1]: Created slice Slice /system/systemd-fsck.
lug 11 18:18:23 mulo systemd[1]: Created slice Slice /system/vncserver.
lug 11 18:18:23 mulo systemd[1]: Created slice User and Session Slice.
lug 11 18:18:23 mulo systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
lug 11 18:18:23 mulo systemd[1]: Started Forward Password Requests to Wall Directory Watch.
lug 11 18:18:23 mulo systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
lug 11 18:18:23 mulo systemd[1]: Expecting device /dev/disk/by-uuid/00d46560-89a9-4027-93d5-71fa2c8e247e...
lug 11 18:18:23 mulo systemd[1]: Expecting device /dev/disk/by-uuid/245c388e-dec5-4ba7-adf9-c4da95835a16...
lug 11 18:18:23 mulo systemd[1]: Expecting device /dev/disk/by-uuid/6401ad98-a5cf-4ccd-bc97-90d098f9368f...
lug 11 18:18:23 mulo systemd[1]: Expecting device /dev/disk/by-uuid/9f40d3cb-e5ce-4877-bf27-e57d966cd4a4...
lug 11 18:18:23 mulo systemd[1]: Expecting device /dev/disk/by-uuid/BD2A-C15F...
lug 11 18:18:23 mulo systemd[1]: Expecting device /dev/disk/by-uuid/c561c919-b617-492a-830c-74ababade132...
lug 11 18:18:23 mulo systemd[1]: Expecting device /dev/disk/by-uuid/d405b74f-f22e-4973-86de-a17460f2b1af...
lug 11 18:18:23 mulo systemd[1]: Expecting device /dev/disk/by-uuid/daa95dca-bdba-4e23-ac42-5e9cc33053bc...
lug 11 18:18:23 mulo systemd[1]: Expecting device /dev/disk/by-uuid/dad2d9f0-d032-4959-a92a-b15945b9867b...
lug 11 18:18:23 mulo systemd[1]: Expecting device /dev/disk/by-uuid/e10ab897-b1af-45c8-bb93-9a85d0561900...
lug 11 18:18:23 mulo systemd[1]: Reached target Local Encrypted Volumes.
lug 11 18:18:23 mulo systemd[1]: Reached target Login Prompts.
lug 11 18:18:23 mulo systemd[1]: Reached target Local Integrity Protected Volumes.
lug 11 18:18:23 mulo systemd[1]: Reached target Path Units.
lug 11 18:18:23 mulo systemd[1]: Reached target Remote File Systems.
lug 11 18:18:23 mulo systemd[1]: Reached target Slice Units.
lug 11 18:18:23 mulo systemd[1]: Reached target Swaps.
lug 11 18:18:23 mulo systemd[1]: Reached target Local Verity Protected Volumes.
lug 11 18:18:23 mulo systemd[1]: Listening on Device-mapper event daemon FIFOs.
lug 11 18:18:23 mulo systemd[1]: Listening on LVM2 poll daemon socket.
lug 11 18:18:23 mulo systemd[1]: Listening on Process Core Dump Socket.
lug 11 18:18:23 mulo systemd[1]: Listening on Credential Encryption/Decryption.
lug 11 18:18:23 mulo systemd[1]: Listening on Journal Socket (/dev/log).
lug 11 18:18:23 mulo systemd[1]: Listening on Journal Sockets.
lug 11 18:18:23 mulo systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 18:18:23 mulo systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 18:18:23 mulo systemd[1]: Listening on udev Control Socket.
lug 11 18:18:23 mulo systemd[1]: Listening on udev Kernel Socket.
lug 11 18:18:23 mulo systemd[1]: Mounting Huge Pages File System...
lug 11 18:18:23 mulo systemd[1]: Mounting POSIX Message Queue File System...
lug 11 18:18:23 mulo systemd[1]: Mounting Kernel Debug File System...
lug 11 18:18:23 mulo systemd[1]: Mounting Kernel Trace File System...
lug 11 18:18:23 mulo systemd[1]: Mounting Temporary Directory /tmp...
lug 11 18:18:23 mulo systemd[1]: Starting Create List of Static Device Nodes...
lug 11 18:18:23 mulo systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
lug 11 18:18:23 mulo systemd[1]: Starting Load Kernel Module configfs...
lug 11 18:18:23 mulo systemd[1]: Starting Load Kernel Module dm_mod...
lug 11 18:18:23 mulo systemd[1]: Starting Load Kernel Module drm...
lug 11 18:18:23 mulo systemd[1]: Starting Load Kernel Module fuse...
lug 11 18:18:23 mulo systemd[1]: Starting Load Kernel Module loop...
lug 11 18:18:23 mulo systemd[1]: Starting Mullvad early boot network blocker...
lug 11 18:18:23 mulo systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
lug 11 18:18:23 mulo systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
lug 11 18:18:23 mulo systemd[1]: Starting Journal Service...
lug 11 18:18:23 mulo systemd[1]: Starting Load Kernel Modules...
lug 11 18:18:23 mulo systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 18:18:23 mulo systemd[1]: Starting Remount Root and Kernel File Systems...
lug 11 18:18:23 mulo systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 18:18:23 mulo systemd[1]: Starting Load udev Rules from Credentials...
lug 11 18:18:23 mulo kernel: loop: module loaded
lug 11 18:18:23 mulo systemd[1]: Starting Coldplug All udev Devices...
lug 11 18:18:23 mulo systemd[1]: Mounted Huge Pages File System.
lug 11 18:18:23 mulo systemd[1]: Mounted POSIX Message Queue File System.
lug 11 18:18:23 mulo systemd[1]: Mounted Kernel Debug File System.
lug 11 18:18:23 mulo systemd[1]: Mounted Kernel Trace File System.
lug 11 18:18:23 mulo systemd[1]: Mounted Temporary Directory /tmp.
lug 11 18:18:23 mulo systemd[1]: Finished Create List of Static Device Nodes.
lug 11 18:18:23 mulo systemd[1]: modprobe@configfs.service: Deactivated successfully.
lug 11 18:18:23 mulo systemd[1]: Finished Load Kernel Module configfs.
lug 11 18:18:23 mulo systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
lug 11 18:18:23 mulo systemd[1]: Finished Load Kernel Module dm_mod.
lug 11 18:18:23 mulo systemd[1]: modprobe@drm.service: Deactivated successfully.
lug 11 18:18:23 mulo systemd[1]: Finished Load Kernel Module drm.
lug 11 18:18:23 mulo systemd[1]: modprobe@fuse.service: Deactivated successfully.
lug 11 18:18:23 mulo systemd[1]: Finished Load Kernel Module fuse.
lug 11 18:18:23 mulo systemd[1]: modprobe@loop.service: Deactivated successfully.
lug 11 18:18:23 mulo systemd[1]: Finished Load Kernel Module loop.
lug 11 18:18:23 mulo kernel: EXT4-fs (dm-1): re-mounted 16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12.
lug 11 18:18:23 mulo systemd[1]: Mounting FUSE Control File System...
lug 11 18:18:23 mulo systemd[1]: Mounting Kernel Configuration File System...
lug 11 18:18:23 mulo systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
lug 11 18:18:23 mulo systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
lug 11 18:18:23 mulo systemd[1]: Finished Load Kernel Modules.
lug 11 18:18:23 mulo systemd[1]: Finished Remount Root and Kernel File Systems.
lug 11 18:18:23 mulo systemd-journald[388]: Collecting audit messages is disabled.
lug 11 18:18:23 mulo systemd[1]: Finished Load udev Rules from Credentials.
lug 11 18:18:23 mulo systemd[1]: Mounted FUSE Control File System.
lug 11 18:18:23 mulo systemd[1]: Mounted Kernel Configuration File System.
lug 11 18:18:23 mulo systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
lug 11 18:18:23 mulo systemd[1]: Starting Load/Save OS Random Seed...
lug 11 18:18:23 mulo systemd[1]: Starting Apply Kernel Variables...
lug 11 18:18:23 mulo systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 18:18:23 mulo systemd[1]: Finished Load/Save OS Random Seed.
lug 11 18:18:23 mulo systemd[1]: Finished Apply Kernel Variables.
lug 11 18:18:23 mulo systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
lug 11 18:18:23 mulo systemd[1]: Create System Users was skipped because no trigger condition checks were met.
lug 11 18:18:23 mulo systemd[1]: Starting Network Name Resolution...
lug 11 18:18:23 mulo systemd[1]: Starting Network Time Synchronization...
lug 11 18:18:23 mulo systemd[1]: Starting Create Static Device Nodes in /dev...
lug 11 18:18:23 mulo systemd[1]: Started Journal Service.
lug 11 18:18:23 mulo systemd-journald[388]: Received client request to flush runtime journal.
lug 11 18:18:23 mulo kernel: mousedev: PS/2 mouse device common for all mice
lug 11 18:18:24 mulo kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
lug 11 18:18:24 mulo kernel: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
lug 11 18:18:24 mulo kernel: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
lug 11 18:18:24 mulo kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
lug 11 18:18:24 mulo kernel: cfg80211: failed to load regulatory.db
lug 11 18:18:24 mulo kernel: input: PC Speaker as /devices/platform/pcspkr/input/input9
lug 11 18:18:24 mulo kernel: Bluetooth: Core ver 2.22
lug 11 18:18:24 mulo kernel: NET: Registered PF_BLUETOOTH protocol family
lug 11 18:18:24 mulo kernel: Bluetooth: HCI device and connection manager initialized
lug 11 18:18:24 mulo kernel: Bluetooth: HCI socket layer initialized
lug 11 18:18:24 mulo kernel: Bluetooth: L2CAP socket layer initialized
lug 11 18:18:24 mulo kernel: Bluetooth: SCO socket layer initialized
lug 11 18:18:24 mulo kernel: RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
lug 11 18:18:24 mulo kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
lug 11 18:18:24 mulo kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
lug 11 18:18:24 mulo kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
lug 11 18:18:24 mulo kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
lug 11 18:18:24 mulo kernel: Intel(R) Wireless WiFi driver for Linux
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: enabling device (0000 -> 0002)
lug 11 18:18:24 mulo kernel: i801_smbus 0000:00:1f.1: SPD Write Disable is set
lug 11 18:18:24 mulo kernel: i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
lug 11 18:18:24 mulo kernel: i2c i2c-0: Successfully instantiated SPD at 0x50
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: Detected crf-id 0x2816, cnv-id 0x1000100 wfpm id 0x80000000
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: PCI dev 31dc/02a4, rev=0x312, rfid=0x108110
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: Detected Intel(R) Wireless-AC 9462
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 0
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 1
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 2
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 3
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 4
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 6
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 8
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 9
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 10
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 11
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 15
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 16
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 18
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 19
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 20
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 21
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 28
lug 11 18:18:24 mulo kernel: ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
lug 11 18:18:24 mulo kernel: iwlwifi 0000:00:0c.0: loaded firmware version 46.7e3e4b69.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
lug 11 18:18:24 mulo kernel: pps_core: LinuxPPS API ver. 1 registered
lug 11 18:18:24 mulo kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
lug 11 18:18:24 mulo kernel: r8169 0000:02:00.0 eth0: RTL8168h/8111h, 1c:69:7a:af:b4:46, XID 541, IRQ 131
lug 11 18:18:24 mulo kernel: r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
lug 11 18:18:24 mulo kernel: PTP clock support registered
lug 11 18:18:24 mulo kernel: r8169 0000:02:00.0 eno1: renamed from eth0
lug 11 18:18:24 mulo kernel: spi-nor spi0.0: supply vcc not found, using dummy regulator
lug 11 18:18:24 mulo kernel: usbcore: registered new interface driver btusb
lug 11 18:18:24 mulo kernel: Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
lug 11 18:18:24 mulo kernel: Bluetooth: hci0: Device revision is 2
lug 11 18:18:24 mulo kernel: Bluetooth: hci0: Secure boot is enabled
lug 11 18:18:24 mulo kernel: Bluetooth: hci0: OTP lock is enabled
lug 11 18:18:24 mulo kernel: Bluetooth: hci0: API lock is enabled
lug 11 18:18:24 mulo kernel: Bluetooth: hci0: Debug lock is disabled
lug 11 18:18:24 mulo kernel: Bluetooth: hci0: Minimum firmware build 1 week 10 2014
lug 11 18:18:25 mulo kernel: Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
lug 11 18:18:25 mulo kernel: Bluetooth: hci0: Boot Address: 0x40800
lug 11 18:18:25 mulo kernel: Bluetooth: hci0: Firmware Version: 201-12.24
lug 11 18:18:25 mulo kernel: Creating 1 MTD partitions on "intel-spi":
lug 11 18:18:25 mulo kernel: 0x000000000000-0x000001000000 : "BIOS"
lug 11 18:18:25 mulo kernel: iwlwifi 0000:00:0c.0: base HW address: 6c:94:66:56:44:a1, OTP minor version: 0x4
lug 11 18:18:25 mulo kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
lug 11 18:18:25 mulo kernel: iwlwifi 0000:00:0c.0 wlo2: renamed from wlan0
lug 11 18:18:25 mulo kernel: intel_telemetry_core Init
lug 11 18:18:26 mulo kernel: EXT4-fs (dm-2): recovery complete
lug 11 18:18:26 mulo kernel: EXT4-fs (dm-2): mounted filesystem 245c388e-dec5-4ba7-adf9-c4da95835a16 r/w with ordered data mode. Quota mode: none.
lug 11 18:18:26 mulo kernel: i915 0000:00:02.0: [drm] Unknown revision 0x06
lug 11 18:18:26 mulo kernel: i915 0000:00:02.0: [drm] Found geminilake (device ID 3184) integrated display version 10.00 stepping **
lug 11 18:18:26 mulo kernel: i915 0000:00:02.0: [drm] Unknown revid 0x06
lug 11 18:18:26 mulo kernel: Console: switching to colour dummy device 80x25
lug 11 18:18:26 mulo kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
lug 11 18:18:26 mulo kernel: i915 0000:00:02.0: [drm] couldn't get memory information
lug 11 18:18:26 mulo kernel: i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
lug 11 18:18:26 mulo kernel: i915 0000:00:02.0: [drm] Applying Increase DDI Disabled quirk
lug 11 18:18:26 mulo kernel: i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
lug 11 18:18:26 mulo kernel: mei_hdcp 0000:00:0f.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
lug 11 18:18:26 mulo kernel: Invalid pltconfig, ensure IPC1 device is enabled in BIOS
lug 11 18:18:26 mulo kernel: [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1
lug 11 18:18:26 mulo kernel: ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
lug 11 18:18:26 mulo kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
lug 11 18:18:26 mulo kernel: i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
lug 11 18:18:26 mulo kernel: snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])
lug 11 18:18:26 mulo kernel: intel_rapl_common: Found RAPL domain package
lug 11 18:18:26 mulo kernel: intel_rapl_common: Found RAPL domain core
lug 11 18:18:26 mulo kernel: intel_rapl_common: Found RAPL domain uncore
lug 11 18:18:26 mulo kernel: intel_rapl_common: Found RAPL domain dram
lug 11 18:18:26 mulo kernel: i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
lug 11 18:18:26 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
lug 11 18:18:26 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
lug 11 18:18:26 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13
lug 11 18:18:26 mulo kernel: Bluetooth: hci0: Waiting for firmware download to complete
lug 11 18:18:26 mulo kernel: Bluetooth: hci0: Firmware loaded in 1365502 usecs
lug 11 18:18:26 mulo kernel: Bluetooth: hci0: Waiting for device to boot
lug 11 18:18:26 mulo kernel: Bluetooth: hci0: Device booted in 13642 usecs
lug 11 18:18:26 mulo kernel: Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
lug 11 18:18:26 mulo kernel: Bluetooth: hci0: Applying Intel DDC parameters completed
lug 11 18:18:26 mulo kernel: Bluetooth: hci0: Firmware revision 0.1 build 201 week 12 2024
lug 11 18:18:26 mulo kernel: Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
lug 11 18:18:26 mulo kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
lug 11 18:18:26 mulo kernel: Bluetooth: BNEP filters: protocol multicast
lug 11 18:18:26 mulo kernel: Bluetooth: BNEP socket layer initialized
lug 11 18:18:26 mulo kernel: Bluetooth: MGMT ver 1.23
lug 11 18:18:26 mulo kernel: NET: Registered PF_ALG protocol family
lug 11 18:18:26 mulo kernel: Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
lug 11 18:18:27 mulo kernel: EXT4-fs (dm-3): warning: mounting fs with errors, running e2fsck is recommended
lug 11 18:18:27 mulo kernel: EXT4-fs (dm-3): recovery complete
lug 11 18:18:27 mulo kernel: EXT4-fs (dm-3): mounted filesystem d405b74f-f22e-4973-86de-a17460f2b1af r/w with ordered data mode. Quota mode: none.
lug 11 18:18:27 mulo kernel: r8169 0000:02:00.0 eno1: Link is Down
lug 11 18:18:27 mulo kernel: iwlwifi 0000:00:0c.0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
lug 11 18:18:27 mulo kernel: iwlwifi 0000:00:0c.0: Registered PHC clock: iwlwifi-PTP, with index: 0
lug 11 18:18:27 mulo kernel: iwlwifi 0000:00:0c.0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
lug 11 18:18:27 mulo kernel: EXT4-fs (dm-5): mounted filesystem e10ab897-b1af-45c8-bb93-9a85d0561900 r/w with ordered data mode. Quota mode: none.
lug 11 18:18:30 mulo kernel: Bluetooth: RFCOMM TTY layer initialized
lug 11 18:18:30 mulo kernel: Bluetooth: RFCOMM socket layer initialized
lug 11 18:18:30 mulo kernel: Bluetooth: RFCOMM ver 1.11
lug 11 18:18:30 mulo kernel: r8169 0000:02:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
lug 11 18:18:31 mulo kernel: wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
lug 11 18:18:31 mulo kernel: wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
lug 11 18:18:32 mulo kernel: EXT4-fs (dm-4): recovery complete
lug 11 18:18:32 mulo kernel: EXT4-fs (dm-4): mounted filesystem 9f40d3cb-e5ce-4877-bf27-e57d966cd4a4 r/w with ordered data mode. Quota mode: none.
lug 11 18:19:28 mulo kernel: warning: `qbittorrent' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
lug 11 18:23:31 mulo kernel: EXT4-fs (dm-3): error count since last fsck: 3
lug 11 18:23:31 mulo kernel: EXT4-fs (dm-3): initial error at time 1564406226: ext4_journal_check_start:56
lug 11 18:23:31 mulo kernel: EXT4-fs (dm-3): last error at time 1736005403: __ext4_find_entry:1683: inode 36454401
lug 11 18:29:01 mulo kernel: usb 2-1: USB disconnect, device number 2
lug 11 18:29:01 mulo kernel: sd 2:0:0:0: [sde] Synchronizing SCSI cache
lug 11 18:29:01 mulo kernel: sd 2:0:0:0: [sde] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
lug 11 18:29:02 mulo kernel: usb 2-1: new SuperSpeed USB device number 7 using xhci_hcd
lug 11 18:29:02 mulo kernel: usb 2-1: New USB device found, idVendor=152d, idProduct=0576, bcdDevice=41.01
lug 11 18:29:02 mulo kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
lug 11 18:29:02 mulo kernel: usb 2-1: Product: ANKEJE USB3.0
lug 11 18:29:02 mulo kernel: usb 2-1: Manufacturer: ANKEJE USB3.0
lug 11 18:29:02 mulo kernel: usb 2-1: SerialNumber: DD56419883014
lug 11 18:29:02 mulo kernel: usb 2-1: UAS is ignored for this device, using usb-storage instead
lug 11 18:29:02 mulo kernel: usb-storage 2-1:1.0: USB Mass Storage device detected
lug 11 18:29:02 mulo kernel: usb-storage 2-1:1.0: Quirks match for vid 152d pid 0576: 800000
lug 11 18:29:02 mulo kernel: scsi host6: usb-storage 2-1:1.0
lug 11 18:29:02 mulo kernel: Buffer I/O error on dev dm-4, logical block 31146430, lost sync page write
lug 11 18:29:02 mulo kernel: Buffer I/O error on dev dm-4, logical block 31146431, lost sync page write
lug 11 18:29:02 mulo kernel: Aborting journal on device dm-4-8.
lug 11 18:29:02 mulo kernel: Buffer I/O error on dev dm-4, logical block 30965760, lost sync page write
lug 11 18:29:02 mulo kernel: Buffer I/O error on dev dm-4, logical block 31146432, lost sync page write
lug 11 18:29:02 mulo kernel: JBD2: I/O error when updating journal superblock for dm-4-8.
lug 11 18:29:02 mulo kernel: EXT4-fs error (device dm-4) in ext4_delete_entry:2741: IO failure
lug 11 18:29:02 mulo kernel: EXT4-fs error (device dm-4) in __ext4_unlink:3286: IO failure
lug 11 18:29:02 mulo kernel: EXT4-fs error (device dm-4): ext4_journal_check_start:86: comm rm: Detected aborted journal
lug 11 18:29:02 mulo kernel: Buffer I/O error on dev dm-4, logical block 0, lost sync page write
lug 11 18:29:02 mulo kernel: EXT4-fs (dm-4): previous I/O error to superblock detected
lug 11 18:29:02 mulo kernel: Buffer I/O error on dev dm-4, logical block 0, lost sync page write
lug 11 18:29:02 mulo kernel: EXT4-fs (dm-4): I/O error while writing superblock
lug 11 18:29:02 mulo kernel: EXT4-fs (dm-4): Remounting filesystem read-only
lug 11 18:29:02 mulo kernel: journal_release_journal_head: freeing b_frozen_data
lug 11 18:29:02 mulo kernel: journal_release_journal_head: freeing b_frozen_data
lug 11 18:29:02 mulo kernel: journal_release_journal_head: freeing b_frozen_data
lug 11 18:29:02 mulo kernel: journal_release_journal_head: freeing b_frozen_data
lug 11 18:29:02 mulo kernel: journal_release_journal_head: freeing b_frozen_data
lug 11 18:29:02 mulo kernel: journal_release_journal_head: freeing b_frozen_data
lug 11 18:29:02 mulo kernel: journal_release_journal_head: freeing b_frozen_data
lug 11 18:29:02 mulo kernel: journal_release_journal_head: freeing b_frozen_data
lug 11 18:29:02 mulo kernel: journal_release_journal_head: freeing b_frozen_data
lug 11 18:29:02 mulo kernel: journal_release_journal_head: freeing b_frozen_data
lug 11 18:29:02 mulo kernel: journal_release_journal_head: freeing b_frozen_data
lug 11 18:29:02 mulo kernel: journal_release_journal_head: freeing b_frozen_data
lug 11 18:29:02 mulo kernel: journal_release_journal_head: freeing b_frozen_data
lug 11 18:29:03 mulo kernel: scsi 6:0:0:0: Direct-Access     ANKEJE   USB3.0           4101 PQ: 0 ANSI: 6
lug 11 18:29:03 mulo kernel: sd 6:0:0:0: [sdf] 500118192 512-byte logical blocks: (256 GB/238 GiB)
lug 11 18:29:03 mulo kernel: sd 6:0:0:0: [sdf] Write Protect is off
lug 11 18:29:03 mulo kernel: sd 6:0:0:0: [sdf] Mode Sense: 47 00 00 08
lug 11 18:29:03 mulo kernel: sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 18:29:03 mulo kernel:  sdf: sdf1
lug 11 18:29:03 mulo kernel: sd 6:0:0:0: [sdf] Attached SCSI disk
lug 11 18:29:03 mulo kernel: Buffer I/O error on dev dm-4, logical block 44043255, lost async page write
lug 11 18:29:03 mulo kernel: Buffer I/O error on dev dm-4, logical block 44043256, lost async page write
lug 11 18:29:03 mulo kernel: Buffer I/O error on dev dm-4, logical block 44043257, lost async page write
lug 11 18:29:03 mulo kernel: Buffer I/O error on dev dm-4, logical block 44043258, lost async page write

seth · 2025-07-11 17:08:23

it seems I need to write in the disk to trigger the problem

If you juggle the drives around, is it always the same disk or the same hub that bails?

pepper · 2025-07-11 17:25:54

no, it's random, and after some amount of time all drives are unmounted. each drive is different (hdd wd, hdd toshiba, ssd lexar) and each drive has a different usb connector (jtech, ugreen etc), after around 1h all drives are unmounted (screenshot). All SMART checks are all ok without any errors. If I downgrade the os with timeshift all problems disappear, this is why I didn't upgraded my system for a month.. I hoped it was a problem that will be fixed in future updates

Last edited by pepper (2025-07-11 17:27:20)

seth · 2025-07-11 20:11:58

Do you have a journal that covers "all drives are unmounted"?
The output of "file -s" is btw. not important, the plan rather was to continuously let that run in the background to prevent the bus … and drive from suspending.
Wrt the latter:
https://man.archlinux.org/man/hdparm.8#S
https://wiki.archlinux.org/title/Power_ … Management (make sure they're not at med_power_with_dipm or min_power )

Edit: is the LTS kernel affected?

Last edited by seth (2025-07-11 20:12:30)

pepper · 2025-07-11 21:07:52

Do you have a journal that covers "all drives are unmounted"?

I try to get one with all drives unmounted. Anyway the last journal was 3/4 drives unmounted, it should be the journal that covers the longest period of unmounting activity from boot.

is the LTS kernel affected?

yes, LTS and also normal kernel

https://man.archlinux.org/man/hdparm.8#S

I'm not sure how I have to use this, for what test..

Now I rebooted with this option enabled on all my /sys/class/scsi_host/hostX/link_power_management_policy files and I also scrambled all usb adapters in my usb ports

echo "max_performance" > /sys/class/scsi_host/host0/link_power_management_policy
echo "max_performance" > /sys/class/scsi_host/host1/link_power_management_policy

and then I executed this after boot, before any unmount. So all drives (sdb sdc sdd sde) are "covered".

#!/usr/bin/env bash
# file: keep-alive-drives.sh

DEVICES=(sdb sdc sdd sde)

keep_alive() {
  local dev=$1
  while true; do
    sudo file -s /dev/"$dev"
    sleep 5
  done
}

for d in "${DEVICES[@]}"; do
  keep_alive "$d" &
  echo "Started keep-alive for /dev/$d (pid $!)"
done

wait

Again 3/4 drives are unmounted very quickly after boot (while the script was running), this is the log:
journalctl -k -b

lug 11 23:00:09 mulo kernel: Linux version 6.12.36-1-lts (linux-lts@archlinux) (gcc (GCC) 15.1.1 20250425, GNU ld (GNU Binutils) 2.44.0) #1 SMP PREEMPT_DYNAMIC Sun, 06 Jul 2025 12:59:22 +0000
lug 11 23:00:09 mulo kernel: Command line: BOOT_IMAGE=/vmlinuz-linux-lts root=/dev/mapper/volgroup_0-lv_root rw cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm root=/dev/volgroup_0/lv_root loglevel=3 quiet usbcore.autosuspend=-1
lug 11 23:00:09 mulo kernel: BIOS-provided physical RAM map:
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x0000000000040000-0x0000000000058fff] usable
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x0000000000059000-0x0000000000059fff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x000000000005a000-0x000000000009dfff] usable
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x0000000012151000-0x00000000773d8fff] usable
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x00000000773d9000-0x0000000079c9dfff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x0000000079c9e000-0x0000000079cc1fff] ACPI data
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x0000000079cc2000-0x0000000079d21fff] ACPI NVS
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x0000000079d22000-0x000000007a0b6fff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x000000007a0b7000-0x000000007a170fff] type 20
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x000000007a171000-0x000000007a564fff] usable
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x000000007a565000-0x000000007a610fff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x000000007a611000-0x000000007abfffff] usable
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x000000007ac00000-0x000000007fffffff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
lug 11 23:00:09 mulo kernel: BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
lug 11 23:00:09 mulo kernel: NX (Execute Disable) protection: active
lug 11 23:00:09 mulo kernel: APIC: Static calls initialized
lug 11 23:00:09 mulo kernel: efi: EFI v2.7 by American Megatrends
lug 11 23:00:09 mulo kernel: efi: ACPI 2.0=0x79cae000 ACPI=0x79cae000 SMBIOS=0x79f6f000 SMBIOS 3.0=0x79f6e000 MEMATTR=0x72de3018 ESRT=0x79f4af18 
lug 11 23:00:09 mulo kernel: efi: Remove mem50: MMIO range=[0xd0000000-0xd0ffffff] (16MB) from e820 map
lug 11 23:00:09 mulo kernel: e820: remove [mem 0xd0000000-0xd0ffffff] reserved
lug 11 23:00:09 mulo kernel: efi: Not removing mem51: MMIO range=[0xd3709000-0xd3709fff] (4KB) from e820 map
lug 11 23:00:09 mulo kernel: efi: Remove mem52: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
lug 11 23:00:09 mulo kernel: e820: remove [mem 0xe0000000-0xefffffff] reserved
lug 11 23:00:09 mulo kernel: efi: Not removing mem53: MMIO range=[0xfe042000-0xfe042fff] (4KB) from e820 map
lug 11 23:00:09 mulo kernel: efi: Not removing mem54: MMIO range=[0xfe043000-0xfe043fff] (4KB) from e820 map
lug 11 23:00:09 mulo kernel: efi: Not removing mem55: MMIO range=[0xfe044000-0xfe044fff] (4KB) from e820 map
lug 11 23:00:09 mulo kernel: efi: Not removing mem56: MMIO range=[0xfe900000-0xfe902fff] (12KB) from e820 map
lug 11 23:00:09 mulo kernel: efi: Not removing mem57: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
lug 11 23:00:09 mulo kernel: efi: Not removing mem58: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map
lug 11 23:00:09 mulo kernel: efi: Not removing mem59: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
lug 11 23:00:09 mulo kernel: efi: Remove mem60: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
lug 11 23:00:09 mulo kernel: e820: remove [mem 0xff000000-0xffffffff] reserved
lug 11 23:00:09 mulo kernel: SMBIOS 3.2.0 present.
lug 11 23:00:09 mulo kernel: DMI: Intel(R) Client Systems NUC7PJYHN/NUC7JYB, BIOS JYGLKCPX.86A.0065.2021.0722.1137 07/22/2021
lug 11 23:00:09 mulo kernel: DMI: Memory slots populated: 2/2
lug 11 23:00:09 mulo kernel: tsc: Detected 1996.800 MHz processor
lug 11 23:00:09 mulo kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
lug 11 23:00:09 mulo kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
lug 11 23:00:09 mulo kernel: last_pfn = 0x280000 max_arch_pfn = 0x400000000
lug 11 23:00:09 mulo kernel: MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs
lug 11 23:00:09 mulo kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
lug 11 23:00:09 mulo kernel: last_pfn = 0x7ac00 max_arch_pfn = 0x400000000
lug 11 23:00:09 mulo kernel: esrt: Reserving ESRT space from 0x0000000079f4af18 to 0x0000000079f4af50.
lug 11 23:00:09 mulo kernel: Using GB pages for direct mapping
lug 11 23:00:09 mulo kernel: Secure boot disabled
lug 11 23:00:09 mulo kernel: RAMDISK: [mem 0x34209000-0x360fbfff]
lug 11 23:00:09 mulo kernel: ACPI: Early table checksum verification disabled
lug 11 23:00:09 mulo kernel: ACPI: RSDP 0x0000000079CAE000 000024 (v02 INTEL )
lug 11 23:00:09 mulo kernel: ACPI: XSDT 0x0000000079CAE0B0 0000D4 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 23:00:09 mulo kernel: ACPI: FACP 0x0000000079CBB630 000114 (v06 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 23:00:09 mulo kernel: ACPI: DSDT 0x0000000079CAE230 00D3FB (v02 INTEL  NUC7CJYB 01072009 INTL 20160930)
lug 11 23:00:09 mulo kernel: ACPI: FACS 0x0000000079D21080 000040
lug 11 23:00:09 mulo kernel: ACPI: FPDT 0x0000000079CBB750 000044 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 23:00:09 mulo kernel: ACPI: FIDT 0x0000000079CBB7A0 00009C (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 23:00:09 mulo kernel: ACPI: MCFG 0x0000000079CBB840 00003C (v01 INTEL  NUC7CJYB 01072009 MSFT 00000097)
lug 11 23:00:09 mulo kernel: ACPI: DBG2 0x0000000079CBB880 000072 (v00 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 23:00:09 mulo kernel: ACPI: DBGP 0x0000000079CBB900 000034 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 23:00:09 mulo kernel: ACPI: HPET 0x0000000079CBB940 000038 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 23:00:09 mulo kernel: ACPI: LPIT 0x0000000079CBB980 00005C (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 23:00:09 mulo kernel: ACPI: APIC 0x0000000079CBB9E0 000084 (v04 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 23:00:09 mulo kernel: ACPI: NPKT 0x0000000079CBBA70 000065 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 23:00:09 mulo kernel: ACPI: SSDT 0x0000000079CBBAE0 0010B3 (v02 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 23:00:09 mulo kernel: ACPI: SSDT 0x0000000079CBCBA0 0009FF (v01 INTEL  NUC7CJYB 00001000 INTL 20160930)
lug 11 23:00:09 mulo kernel: ACPI: SSDT 0x0000000079CBD5A0 0000B1 (v01 INTEL  NUC7CJYB 00001000 INTL 20160930)
lug 11 23:00:09 mulo kernel: ACPI: SSDT 0x0000000079CBD660 000661 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 23:00:09 mulo kernel: ACPI: SSDT 0x0000000079CBDCD0 000775 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 23:00:09 mulo kernel: ACPI: SSDT 0x0000000079CBE450 00035F (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 23:00:09 mulo kernel: ACPI: SSDT 0x0000000079CBE7B0 0001E6 (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 23:00:09 mulo kernel: ACPI: SSDT 0x0000000079CBE9A0 00286F (v02 INTEL  NUC7CJYB 00003000 INTL 20160930)
lug 11 23:00:09 mulo kernel: ACPI: BGRT 0x0000000079CC1210 000038 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 23:00:09 mulo kernel: ACPI: DMAR 0x0000000079CC1250 0000A8 (v01 INTEL  NUC7CJYB 00000003 BRXT 0100000D)
lug 11 23:00:09 mulo kernel: ACPI: WDAT 0x0000000079CC1300 000104 (v01 INTEL  NUC7CJYB 00000000      00000000)
lug 11 23:00:09 mulo kernel: ACPI: WSMT 0x0000000079CC1410 000028 (v01 INTEL  NUC7CJYB 01072009 AMI  00010013)
lug 11 23:00:09 mulo kernel: ACPI: Reserving FACP table memory at [mem 0x79cbb630-0x79cbb743]
lug 11 23:00:09 mulo kernel: ACPI: Reserving DSDT table memory at [mem 0x79cae230-0x79cbb62a]
lug 11 23:00:09 mulo kernel: ACPI: Reserving FACS table memory at [mem 0x79d21080-0x79d210bf]
lug 11 23:00:09 mulo kernel: ACPI: Reserving FPDT table memory at [mem 0x79cbb750-0x79cbb793]
lug 11 23:00:09 mulo kernel: ACPI: Reserving FIDT table memory at [mem 0x79cbb7a0-0x79cbb83b]
lug 11 23:00:09 mulo kernel: ACPI: Reserving MCFG table memory at [mem 0x79cbb840-0x79cbb87b]
lug 11 23:00:09 mulo kernel: ACPI: Reserving DBG2 table memory at [mem 0x79cbb880-0x79cbb8f1]
lug 11 23:00:09 mulo kernel: ACPI: Reserving DBGP table memory at [mem 0x79cbb900-0x79cbb933]
lug 11 23:00:09 mulo kernel: ACPI: Reserving HPET table memory at [mem 0x79cbb940-0x79cbb977]
lug 11 23:00:09 mulo kernel: ACPI: Reserving LPIT table memory at [mem 0x79cbb980-0x79cbb9db]
lug 11 23:00:09 mulo kernel: ACPI: Reserving APIC table memory at [mem 0x79cbb9e0-0x79cbba63]
lug 11 23:00:09 mulo kernel: ACPI: Reserving NPKT table memory at [mem 0x79cbba70-0x79cbbad4]
lug 11 23:00:09 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbbae0-0x79cbcb92]
lug 11 23:00:09 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbcba0-0x79cbd59e]
lug 11 23:00:09 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbd5a0-0x79cbd650]
lug 11 23:00:09 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbd660-0x79cbdcc0]
lug 11 23:00:09 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbdcd0-0x79cbe444]
lug 11 23:00:09 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe450-0x79cbe7ae]
lug 11 23:00:09 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe7b0-0x79cbe995]
lug 11 23:00:09 mulo kernel: ACPI: Reserving SSDT table memory at [mem 0x79cbe9a0-0x79cc120e]
lug 11 23:00:09 mulo kernel: ACPI: Reserving BGRT table memory at [mem 0x79cc1210-0x79cc1247]
lug 11 23:00:09 mulo kernel: ACPI: Reserving DMAR table memory at [mem 0x79cc1250-0x79cc12f7]
lug 11 23:00:09 mulo kernel: ACPI: Reserving WDAT table memory at [mem 0x79cc1300-0x79cc1403]
lug 11 23:00:09 mulo kernel: ACPI: Reserving WSMT table memory at [mem 0x79cc1410-0x79cc1437]
lug 11 23:00:09 mulo kernel: No NUMA configuration found
lug 11 23:00:09 mulo kernel: Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
lug 11 23:00:09 mulo kernel: NODE_DATA(0) allocated [mem 0x27ffd52c0-0x27fffffff]
lug 11 23:00:09 mulo kernel: Zone ranges:
lug 11 23:00:09 mulo kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
lug 11 23:00:09 mulo kernel:   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
lug 11 23:00:09 mulo kernel:   Normal   [mem 0x0000000100000000-0x000000027fffffff]
lug 11 23:00:09 mulo kernel:   Device   empty
lug 11 23:00:09 mulo kernel: Movable zone start for each node
lug 11 23:00:09 mulo kernel: Early memory node ranges
lug 11 23:00:09 mulo kernel:   node   0: [mem 0x0000000000001000-0x000000000003efff]
lug 11 23:00:09 mulo kernel:   node   0: [mem 0x0000000000040000-0x0000000000058fff]
lug 11 23:00:09 mulo kernel:   node   0: [mem 0x000000000005a000-0x000000000009dfff]
lug 11 23:00:09 mulo kernel:   node   0: [mem 0x0000000000100000-0x000000000fffffff]
lug 11 23:00:09 mulo kernel:   node   0: [mem 0x0000000012151000-0x00000000773d8fff]
lug 11 23:00:09 mulo kernel:   node   0: [mem 0x000000007a171000-0x000000007a564fff]
lug 11 23:00:09 mulo kernel:   node   0: [mem 0x000000007a611000-0x000000007abfffff]
lug 11 23:00:09 mulo kernel:   node   0: [mem 0x0000000100000000-0x000000027fffffff]
lug 11 23:00:09 mulo kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
lug 11 23:00:09 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 11 23:00:09 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 11 23:00:09 mulo kernel: On node 0, zone DMA: 1 pages in unavailable ranges
lug 11 23:00:09 mulo kernel: On node 0, zone DMA: 98 pages in unavailable ranges
lug 11 23:00:09 mulo kernel: On node 0, zone DMA32: 8529 pages in unavailable ranges
lug 11 23:00:09 mulo kernel: On node 0, zone DMA32: 11672 pages in unavailable ranges
lug 11 23:00:09 mulo kernel: On node 0, zone DMA32: 172 pages in unavailable ranges
lug 11 23:00:09 mulo kernel: On node 0, zone Normal: 21504 pages in unavailable ranges
lug 11 23:00:09 mulo kernel: Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
lug 11 23:00:09 mulo kernel: ACPI: PM-Timer IO Port: 0x408
lug 11 23:00:09 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
lug 11 23:00:09 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
lug 11 23:00:09 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
lug 11 23:00:09 mulo kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
lug 11 23:00:09 mulo kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
lug 11 23:00:09 mulo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
lug 11 23:00:09 mulo kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
lug 11 23:00:09 mulo kernel: ACPI: Using ACPI (MADT) for SMP configuration information
lug 11 23:00:09 mulo kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
lug 11 23:00:09 mulo kernel: e820: update [mem 0x73d75000-0x73e0efff] usable ==> reserved
lug 11 23:00:09 mulo kernel: TSC deadline timer available
lug 11 23:00:09 mulo kernel: CPU topo: Max. logical packages:   1
lug 11 23:00:09 mulo kernel: CPU topo: Max. logical dies:       1
lug 11 23:00:09 mulo kernel: CPU topo: Max. dies per package:   1
lug 11 23:00:09 mulo kernel: CPU topo: Max. threads per core:   1
lug 11 23:00:09 mulo kernel: CPU topo: Num. cores per package:     4
lug 11 23:00:09 mulo kernel: CPU topo: Num. threads per package:   4
lug 11 23:00:09 mulo kernel: CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
lug 11 23:00:09 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
lug 11 23:00:09 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
lug 11 23:00:09 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x00059000-0x00059fff]
lug 11 23:00:09 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
lug 11 23:00:09 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x10000000-0x12150fff]
lug 11 23:00:09 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x73d75000-0x73e0efff]
lug 11 23:00:09 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x773d9000-0x7a170fff]
lug 11 23:00:09 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x7a565000-0x7a610fff]
lug 11 23:00:09 mulo kernel: PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0xffffffff]
lug 11 23:00:09 mulo kernel: [mem 0x80000000-0xd3708fff] available for PCI devices
lug 11 23:00:09 mulo kernel: Booting paravirtualized kernel on bare hardware
lug 11 23:00:09 mulo kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
lug 11 23:00:09 mulo kernel: setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
lug 11 23:00:09 mulo kernel: percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u524288
lug 11 23:00:09 mulo kernel: pcpu-alloc: s237568 r8192 d28672 u524288 alloc=1*2097152
lug 11 23:00:09 mulo kernel: pcpu-alloc: [0] 0 1 2 3 
lug 11 23:00:09 mulo kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=/dev/mapper/volgroup_0-lv_root rw cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm root=/dev/volgroup_0/lv_root loglevel=3 quiet usbcore.autosuspend=-1
lug 11 23:00:09 mulo kernel: Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-linux-lts cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm", will be passed to user space.
lug 11 23:00:09 mulo kernel: random: crng init done
lug 11 23:00:09 mulo kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
lug 11 23:00:09 mulo kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
lug 11 23:00:09 mulo kernel: Fallback order for Node 0: 0 
lug 11 23:00:09 mulo kernel: Built 1 zonelists, mobility grouping on.  Total pages: 2055174
lug 11 23:00:09 mulo kernel: Policy zone: Normal
lug 11 23:00:09 mulo kernel: mem auto-init: stack:all(zero), heap alloc:on, heap free:off
lug 11 23:00:09 mulo kernel: software IO TLB: area num 4.
lug 11 23:00:09 mulo kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
lug 11 23:00:09 mulo kernel: ftrace: allocating 51450 entries in 201 pages
lug 11 23:00:09 mulo kernel: ftrace: allocated 201 pages with 4 groups
lug 11 23:00:09 mulo kernel: Dynamic Preempt: voluntary
lug 11 23:00:09 mulo kernel: rcu: Preemptible hierarchical RCU implementation.
lug 11 23:00:09 mulo kernel: rcu:         RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
lug 11 23:00:09 mulo kernel: rcu:         RCU priority boosting: priority 1 delay 500 ms.
lug 11 23:00:09 mulo kernel:         Trampoline variant of Tasks RCU enabled.
lug 11 23:00:09 mulo kernel:         Rude variant of Tasks RCU enabled.
lug 11 23:00:09 mulo kernel:         Tracing variant of Tasks RCU enabled.
lug 11 23:00:09 mulo kernel: rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
lug 11 23:00:09 mulo kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
lug 11 23:00:09 mulo kernel: RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 11 23:00:09 mulo kernel: RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 11 23:00:09 mulo kernel: RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
lug 11 23:00:09 mulo kernel: NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
lug 11 23:00:09 mulo kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention.
lug 11 23:00:09 mulo kernel: kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
lug 11 23:00:09 mulo kernel: Console: colour dummy device 80x25
lug 11 23:00:09 mulo kernel: printk: legacy console [tty0] enabled
lug 11 23:00:09 mulo kernel: ACPI: Core revision 20240827
lug 11 23:00:09 mulo kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
lug 11 23:00:09 mulo kernel: APIC: Switch to symmetric I/O mode setup
lug 11 23:00:09 mulo kernel: DMAR: Host address width 39
lug 11 23:00:09 mulo kernel: DMAR: DRHD base: 0x000000fed64000 flags: 0x0
lug 11 23:00:09 mulo kernel: DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
lug 11 23:00:09 mulo kernel: DMAR: DRHD base: 0x000000fed65000 flags: 0x1
lug 11 23:00:09 mulo kernel: DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
lug 11 23:00:09 mulo kernel: DMAR: RMRR base: 0x00000079c3c000 end: 0x00000079c5bfff
lug 11 23:00:09 mulo kernel: DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
lug 11 23:00:09 mulo kernel: DMAR-IR: IOAPIC id 1 under DRHD base  0xfed65000 IOMMU 1
lug 11 23:00:09 mulo kernel: DMAR-IR: HPET id 0 under DRHD base 0xfed65000
lug 11 23:00:09 mulo kernel: DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
lug 11 23:00:09 mulo kernel: DMAR-IR: Enabled IRQ remapping in x2apic mode
lug 11 23:00:09 mulo kernel: x2apic enabled
lug 11 23:00:09 mulo kernel: APIC: Switched APIC routing to: cluster x2apic
lug 11 23:00:09 mulo kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
lug 11 23:00:09 mulo kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
lug 11 23:00:09 mulo kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3995.00 BogoMIPS (lpj=6656000)
lug 11 23:00:09 mulo kernel: x86/cpu: SGX disabled or unsupported by BIOS.
lug 11 23:00:09 mulo kernel: CPU0: Thermal monitoring enabled (TM1)
lug 11 23:00:09 mulo kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated
lug 11 23:00:09 mulo kernel: Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
lug 11 23:00:09 mulo kernel: Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
lug 11 23:00:09 mulo kernel: process: using mwait in idle threads
lug 11 23:00:09 mulo kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
lug 11 23:00:09 mulo kernel: Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit
lug 11 23:00:09 mulo kernel: Spectre V2 : Mitigation: Enhanced / Automatic IBRS
lug 11 23:00:09 mulo kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
lug 11 23:00:09 mulo kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
lug 11 23:00:09 mulo kernel: Register File Data Sampling: Mitigation: Clear Register File
lug 11 23:00:09 mulo kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
lug 11 23:00:09 mulo kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
lug 11 23:00:09 mulo kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
lug 11 23:00:09 mulo kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
lug 11 23:00:09 mulo kernel: x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
lug 11 23:00:09 mulo kernel: x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
lug 11 23:00:09 mulo kernel: x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
lug 11 23:00:09 mulo kernel: Freeing SMP alternatives memory: 40K
lug 11 23:00:09 mulo kernel: pid_max: default: 32768 minimum: 301
lug 11 23:00:09 mulo kernel: LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
lug 11 23:00:09 mulo kernel: landlock: Up and running.
lug 11 23:00:09 mulo kernel: Yama: becoming mindful.
lug 11 23:00:09 mulo kernel: LSM support for eBPF active
lug 11 23:00:09 mulo kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
lug 11 23:00:09 mulo kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
lug 11 23:00:09 mulo kernel: smpboot: CPU0: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz (family: 0x6, model: 0x7a, stepping: 0x8)
lug 11 23:00:09 mulo kernel: Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
lug 11 23:00:09 mulo kernel: ... version:                4
lug 11 23:00:09 mulo kernel: ... bit width:              48
lug 11 23:00:09 mulo kernel: ... generic registers:      4
lug 11 23:00:09 mulo kernel: ... value mask:             0000ffffffffffff
lug 11 23:00:09 mulo kernel: ... max period:             00007fffffffffff
lug 11 23:00:09 mulo kernel: ... fixed-purpose events:   3
lug 11 23:00:09 mulo kernel: ... event mask:             000000070000000f
lug 11 23:00:09 mulo kernel: signal: max sigframe size: 2032
lug 11 23:00:09 mulo kernel: Estimated ratio of average max frequency by base frequency (times 1024): 1638
lug 11 23:00:09 mulo kernel: rcu: Hierarchical SRCU implementation.
lug 11 23:00:09 mulo kernel: rcu:         Max phase no-delay instances is 1000.
lug 11 23:00:09 mulo kernel: Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
lug 11 23:00:09 mulo kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
lug 11 23:00:09 mulo kernel: smp: Bringing up secondary CPUs ...
lug 11 23:00:09 mulo kernel: smpboot: x86: Booting SMP configuration:
lug 11 23:00:09 mulo kernel: .... node  #0, CPUs:      #1 #2 #3
lug 11 23:00:09 mulo kernel: smp: Brought up 1 node, 4 CPUs
lug 11 23:00:09 mulo kernel: smpboot: Total of 4 processors activated (15980.00 BogoMIPS)
lug 11 23:00:09 mulo kernel: Memory: 7910728K/8220696K available (18432K kernel code, 2673K rwdata, 14352K rodata, 4288K init, 4272K bss, 297500K reserved, 0K cma-reserved)
lug 11 23:00:09 mulo kernel: devtmpfs: initialized
lug 11 23:00:09 mulo kernel: x86/mm: Memory block size: 128MB
lug 11 23:00:09 mulo kernel: ACPI: PM: Registering ACPI NVS region [mem 0x79cc2000-0x79d21fff] (393216 bytes)
lug 11 23:00:09 mulo kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
lug 11 23:00:09 mulo kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
lug 11 23:00:09 mulo kernel: pinctrl core: initialized pinctrl subsystem
lug 11 23:00:09 mulo kernel: PM: RTC time: 20:57:57, date: 2025-07-11
lug 11 23:00:09 mulo kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
lug 11 23:00:09 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
lug 11 23:00:09 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
lug 11 23:00:09 mulo kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
lug 11 23:00:09 mulo kernel: audit: initializing netlink subsys (disabled)
lug 11 23:00:09 mulo kernel: audit: type=2000 audit(1752267477.083:1): state=initialized audit_enabled=0 res=1
lug 11 23:00:09 mulo kernel: thermal_sys: Registered thermal governor 'fair_share'
lug 11 23:00:09 mulo kernel: thermal_sys: Registered thermal governor 'bang_bang'
lug 11 23:00:09 mulo kernel: thermal_sys: Registered thermal governor 'step_wise'
lug 11 23:00:09 mulo kernel: thermal_sys: Registered thermal governor 'user_space'
lug 11 23:00:09 mulo kernel: thermal_sys: Registered thermal governor 'power_allocator'
lug 11 23:00:09 mulo kernel: cpuidle: using governor ladder
lug 11 23:00:09 mulo kernel: cpuidle: using governor menu
lug 11 23:00:09 mulo kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
lug 11 23:00:09 mulo kernel: PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
lug 11 23:00:09 mulo kernel: PCI: Using configuration type 1 for base access
lug 11 23:00:09 mulo kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
lug 11 23:00:09 mulo kernel: HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
lug 11 23:00:09 mulo kernel: HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
lug 11 23:00:09 mulo kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
lug 11 23:00:09 mulo kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
lug 11 23:00:09 mulo kernel: ACPI: Added _OSI(Module Device)
lug 11 23:00:09 mulo kernel: ACPI: Added _OSI(Processor Device)
lug 11 23:00:09 mulo kernel: ACPI: Added _OSI(Processor Aggregator Device)
lug 11 23:00:09 mulo kernel: ACPI: 9 ACPI AML tables successfully acquired and loaded
lug 11 23:00:09 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 11 23:00:09 mulo kernel: ACPI: SSDT 0xFFFF8F1C016DA000 000190 (v02 PmRef  Cpu0Cst  00003001 INTL 20160930)
lug 11 23:00:09 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 11 23:00:09 mulo kernel: ACPI: SSDT 0xFFFF8F1C016DB400 0001E6 (v02 PmRef  ApIst    00003000 INTL 20160930)
lug 11 23:00:09 mulo kernel: ACPI: Dynamic OEM Table Load:
lug 11 23:00:09 mulo kernel: ACPI: SSDT 0xFFFF8F1C00DCF200 0000C9 (v02 PmRef  ApCst    00003000 INTL 20160930)
lug 11 23:00:09 mulo kernel: ACPI: EC: EC started
lug 11 23:00:09 mulo kernel: ACPI: EC: interrupt blocked
lug 11 23:00:09 mulo kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
lug 11 23:00:09 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC used to handle transactions
lug 11 23:00:09 mulo kernel: ACPI: Interpreter enabled
lug 11 23:00:09 mulo kernel: ACPI: PM: (supports S0 S3 S4 S5)
lug 11 23:00:09 mulo kernel: ACPI: Using IOAPIC for interrupt routing
lug 11 23:00:09 mulo kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
lug 11 23:00:09 mulo kernel: PCI: Using E820 reservations for host bridge windows
lug 11 23:00:09 mulo kernel: ACPI: Enabled 1 GPEs in block 00 to 7F
lug 11 23:00:09 mulo kernel: ACPI: \_SB_.PCI0.RP01.PXSX.DRST: New power resource
lug 11 23:00:09 mulo kernel: ACPI: \_SB_.PCI0.RP02.PXSX.DRST: New power resource
lug 11 23:00:09 mulo kernel: ACPI: \_SB_.PCI0.RP03.PXSX.DRST: New power resource
lug 11 23:00:09 mulo kernel: ACPI: \_SB_.PCI0.RP04.PXSX.DRST: New power resource
lug 11 23:00:09 mulo kernel: ACPI: \_SB_.PCI0.RP05.PXSX.DRST: New power resource
lug 11 23:00:09 mulo kernel: ACPI: \_SB_.PCI0.RP06.PXSX.DRST: New power resource
lug 11 23:00:09 mulo kernel: ACPI: \_SB_.PCI0.CNVW.WRST: New power resource
lug 11 23:00:09 mulo kernel: ACPI: \_TZ_.FN00: New power resource
lug 11 23:00:09 mulo kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
lug 11 23:00:09 mulo kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
lug 11 23:00:09 mulo kernel: acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
lug 11 23:00:09 mulo kernel: PCI host bridge to bus 0000:00
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [mem 0x7c000001-0xcfffffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
lug 11 23:00:09 mulo kernel: pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000 conventional PCI endpoint
lug 11 23:00:09 mulo kernel: pci 0000:00:02.0: [8086:3184] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
lug 11 23:00:09 mulo kernel: pci 0000:00:02.0: BAR 0 [mem 0xa0000000-0xa0ffffff 64bit]
lug 11 23:00:09 mulo kernel: pci 0000:00:02.0: BAR 2 [mem 0x90000000-0x9fffffff 64bit pref]
lug 11 23:00:09 mulo kernel: pci 0000:00:02.0: BAR 4 [io  0xf000-0xf03f]
lug 11 23:00:09 mulo kernel: pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
lug 11 23:00:09 mulo kernel: pci 0000:00:0c.0: [8086:31dc] type 00 class 0x028000 PCIe Root Complex Integrated Endpoint
lug 11 23:00:09 mulo kernel: pci 0000:00:0c.0: BAR 0 [mem 0xa1314000-0xa1317fff 64bit]
lug 11 23:00:09 mulo kernel: pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
lug 11 23:00:09 mulo kernel: pci 0000:00:0e.0: [8086:3198] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
lug 11 23:00:09 mulo kernel: pci 0000:00:0e.0: BAR 0 [mem 0xa1310000-0xa1313fff 64bit]
lug 11 23:00:09 mulo kernel: pci 0000:00:0e.0: BAR 4 [mem 0xa1000000-0xa10fffff 64bit]
lug 11 23:00:09 mulo kernel: pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
lug 11 23:00:09 mulo kernel: pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000 conventional PCI endpoint
lug 11 23:00:09 mulo kernel: pci 0000:00:0f.0: BAR 0 [mem 0xa131f000-0xa131ffff 64bit]
lug 11 23:00:09 mulo kernel: pci 0000:00:0f.0: PME# supported from D3hot
lug 11 23:00:09 mulo kernel: pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601 conventional PCI endpoint
lug 11 23:00:09 mulo kernel: pci 0000:00:12.0: BAR 0 [mem 0xa1318000-0xa1319fff]
lug 11 23:00:09 mulo kernel: pci 0000:00:12.0: BAR 1 [mem 0xa131e000-0xa131e0ff]
lug 11 23:00:09 mulo kernel: pci 0000:00:12.0: BAR 2 [io  0xf090-0xf097]
lug 11 23:00:09 mulo kernel: pci 0000:00:12.0: BAR 3 [io  0xf080-0xf083]
lug 11 23:00:09 mulo kernel: pci 0000:00:12.0: BAR 4 [io  0xf060-0xf07f]
lug 11 23:00:09 mulo kernel: pci 0000:00:12.0: BAR 5 [mem 0xa131d000-0xa131d7ff]
lug 11 23:00:09 mulo kernel: pci 0000:00:12.0: PME# supported from D3hot
lug 11 23:00:09 mulo kernel: pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400 PCIe Root Port
lug 11 23:00:09 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 11 23:00:09 mulo kernel: pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
lug 11 23:00:09 mulo kernel: pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
lug 11 23:00:09 mulo kernel: pci 0000:00:13.2: [8086:31da] type 01 class 0x060400 PCIe Root Port
lug 11 23:00:09 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 11 23:00:09 mulo kernel: pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
lug 11 23:00:09 mulo kernel: pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
lug 11 23:00:09 mulo kernel: pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
lug 11 23:00:09 mulo kernel: pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330 conventional PCI endpoint
lug 11 23:00:09 mulo kernel: pci 0000:00:15.0: BAR 0 [mem 0xa1300000-0xa130ffff 64bit]
lug 11 23:00:09 mulo kernel: pci 0000:00:15.0: PME# supported from D3hot D3cold
lug 11 23:00:09 mulo kernel: pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501 conventional PCI endpoint
lug 11 23:00:09 mulo kernel: pci 0000:00:1c.0: BAR 0 [mem 0xa131c000-0xa131cfff 64bit]
lug 11 23:00:09 mulo kernel: pci 0000:00:1c.0: BAR 2 [mem 0xa131b000-0xa131bfff 64bit]
lug 11 23:00:09 mulo kernel: pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100 conventional PCI endpoint
lug 11 23:00:09 mulo kernel: pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500 conventional PCI endpoint
lug 11 23:00:09 mulo kernel: pci 0000:00:1f.1: BAR 0 [mem 0xa131a000-0xa131a0ff 64bit]
lug 11 23:00:09 mulo kernel: pci 0000:00:1f.1: BAR 4 [io  0xf040-0xf05f]
lug 11 23:00:09 mulo kernel: pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000 PCIe Endpoint
lug 11 23:00:09 mulo kernel: pci 0000:01:00.0: BAR 0 [mem 0xa1200000-0xa1200fff]
lug 11 23:00:09 mulo kernel: pci 0000:01:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
lug 11 23:00:09 mulo kernel: pci 0000:01:00.0: Max Payload Size set to 128 (was 128, max 128)
lug 11 23:00:09 mulo kernel: pci 0000:01:00.0: supports D1 D2
lug 11 23:00:09 mulo kernel: pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
lug 11 23:00:09 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 11 23:00:09 mulo kernel: pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
lug 11 23:00:09 mulo kernel: pci 0000:02:00.0: BAR 0 [io  0xe000-0xe0ff]
lug 11 23:00:09 mulo kernel: pci 0000:02:00.0: BAR 2 [mem 0xa1104000-0xa1104fff 64bit]
lug 11 23:00:09 mulo kernel: pci 0000:02:00.0: BAR 4 [mem 0xa1100000-0xa1103fff 64bit]
lug 11 23:00:09 mulo kernel: pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
lug 11 23:00:09 mulo kernel: pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128)
lug 11 23:00:09 mulo kernel: pci 0000:02:00.0: supports D1 D2
lug 11 23:00:09 mulo kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
lug 11 23:00:09 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 11 23:00:09 mulo kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 3
lug 11 23:00:09 mulo kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 4
lug 11 23:00:09 mulo kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 5
lug 11 23:00:09 mulo kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 6
lug 11 23:00:09 mulo kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 7
lug 11 23:00:09 mulo kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 9
lug 11 23:00:09 mulo kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 10
lug 11 23:00:09 mulo kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 11
lug 11 23:00:09 mulo kernel: ACPI: EC: interrupt unblocked
lug 11 23:00:09 mulo kernel: ACPI: EC: event unblocked
lug 11 23:00:09 mulo kernel: ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
lug 11 23:00:09 mulo kernel: ACPI: EC: GPE=0x22
lug 11 23:00:09 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: Boot DSDT EC initialization complete
lug 11 23:00:09 mulo kernel: ACPI: \_SB_.PCI0.SBRG.H_EC: EC: Used to handle transactions and events
lug 11 23:00:09 mulo kernel: iommu: Default domain type: Translated
lug 11 23:00:09 mulo kernel: iommu: DMA domain TLB invalidation policy: lazy mode
lug 11 23:00:09 mulo kernel: SCSI subsystem initialized
lug 11 23:00:09 mulo kernel: libata version 3.00 loaded.
lug 11 23:00:09 mulo kernel: ACPI: bus type USB registered
lug 11 23:00:09 mulo kernel: usbcore: registered new interface driver usbfs
lug 11 23:00:09 mulo kernel: usbcore: registered new interface driver hub
lug 11 23:00:09 mulo kernel: usbcore: registered new device driver usb
lug 11 23:00:09 mulo kernel: EDAC MC: Ver: 3.0.0
lug 11 23:00:09 mulo kernel: efivars: Registered efivars operations
lug 11 23:00:09 mulo kernel: NetLabel: Initializing
lug 11 23:00:09 mulo kernel: NetLabel:  domain hash size = 128
lug 11 23:00:09 mulo kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
lug 11 23:00:09 mulo kernel: NetLabel:  unlabeled traffic allowed by default
lug 11 23:00:09 mulo kernel: mctp: management component transport protocol core
lug 11 23:00:09 mulo kernel: NET: Registered PF_MCTP protocol family
lug 11 23:00:09 mulo kernel: PCI: Using ACPI for IRQ routing
lug 11 23:00:09 mulo kernel: PCI: pci_cache_line_size set to 64 bytes
lug 11 23:00:09 mulo kernel: resource: Expanded resource Reserved due to conflict with PCI Bus 0000:00
lug 11 23:00:09 mulo kernel: e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
lug 11 23:00:09 mulo kernel: e820: reserve RAM buffer [mem 0x00059000-0x0005ffff]
lug 11 23:00:09 mulo kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
lug 11 23:00:09 mulo kernel: e820: reserve RAM buffer [mem 0x73d75000-0x73ffffff]
lug 11 23:00:09 mulo kernel: e820: reserve RAM buffer [mem 0x773d9000-0x77ffffff]
lug 11 23:00:09 mulo kernel: e820: reserve RAM buffer [mem 0x7a565000-0x7bffffff]
lug 11 23:00:09 mulo kernel: e820: reserve RAM buffer [mem 0x7ac00000-0x7bffffff]
lug 11 23:00:09 mulo kernel: pci 0000:00:02.0: vgaarb: setting as boot VGA device
lug 11 23:00:09 mulo kernel: pci 0000:00:02.0: vgaarb: bridge control possible
lug 11 23:00:09 mulo kernel: pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
lug 11 23:00:09 mulo kernel: vgaarb: loaded
lug 11 23:00:09 mulo kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
lug 11 23:00:09 mulo kernel: hpet0: 8 comparators, 64-bit 19.200000 MHz counter
lug 11 23:00:09 mulo kernel: clocksource: Switched to clocksource tsc-early
lug 11 23:00:09 mulo kernel: VFS: Disk quotas dquot_6.6.0
lug 11 23:00:09 mulo kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
lug 11 23:00:09 mulo kernel: pnp: PnP ACPI init
lug 11 23:00:09 mulo kernel: system 00:00: [io  0x0a00-0x0a1f] has been reserved
lug 11 23:00:09 mulo kernel: system 00:00: [io  0x0a20-0x0a2f] has been reserved
lug 11 23:00:09 mulo kernel: system 00:00: [io  0x0a30-0x0a3f] has been reserved
lug 11 23:00:09 mulo kernel: system 00:00: [io  0x0a40-0x0a4f] has been reserved
lug 11 23:00:09 mulo kernel: system 00:00: [io  0x0a50-0x0a5f] has been reserved
lug 11 23:00:09 mulo kernel: system 00:00: [io  0x0a60-0x0a6f] has been reserved
lug 11 23:00:09 mulo kernel: system 00:01: [io  0x0680-0x069f] has been reserved
lug 11 23:00:09 mulo kernel: system 00:01: [io  0x0400-0x047f] could not be reserved
lug 11 23:00:09 mulo kernel: system 00:01: [io  0x0500-0x05fe] has been reserved
lug 11 23:00:09 mulo kernel: system 00:01: [io  0x0600-0x061f] has been reserved
lug 11 23:00:09 mulo kernel: system 00:01: [io  0x164e-0x164f] has been reserved
lug 11 23:00:09 mulo kernel: system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
lug 11 23:00:09 mulo kernel: system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
lug 11 23:00:09 mulo kernel: system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
lug 11 23:00:09 mulo kernel: system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
lug 11 23:00:09 mulo kernel: system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
lug 11 23:00:09 mulo kernel: system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
lug 11 23:00:09 mulo kernel: system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
lug 11 23:00:09 mulo kernel: system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
lug 11 23:00:09 mulo kernel: system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
lug 11 23:00:09 mulo kernel: pnp: PnP ACPI: found 4 devices
lug 11 23:00:09 mulo kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
lug 11 23:00:09 mulo kernel: NET: Registered PF_INET protocol family
lug 11 23:00:09 mulo kernel: IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
lug 11 23:00:09 mulo kernel: tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
lug 11 23:00:09 mulo kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
lug 11 23:00:09 mulo kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
lug 11 23:00:09 mulo kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
lug 11 23:00:09 mulo kernel: TCP: Hash tables configured (established 65536 bind 65536)
lug 11 23:00:09 mulo kernel: MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
lug 11 23:00:09 mulo kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
lug 11 23:00:09 mulo kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
lug 11 23:00:09 mulo kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
lug 11 23:00:09 mulo kernel: NET: Registered PF_XDP protocol family
lug 11 23:00:09 mulo kernel: pci 0000:00:13.0: PCI bridge to [bus 01]
lug 11 23:00:09 mulo kernel: pci 0000:00:13.0:   bridge window [mem 0xa1200000-0xa12fffff]
lug 11 23:00:09 mulo kernel: pci 0000:00:13.2: PCI bridge to [bus 02]
lug 11 23:00:09 mulo kernel: pci 0000:00:13.2:   bridge window [io  0xe000-0xefff]
lug 11 23:00:09 mulo kernel: pci 0000:00:13.2:   bridge window [mem 0xa1100000-0xa11fffff]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 9 [mem 0x7c000001-0xcfffffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 10 [mem 0xe0000000-0xefffffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 11 [mem 0xfea00000-0xfeafffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 12 [mem 0xfed00000-0xfed003ff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 13 [mem 0xfed01000-0xfed01fff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 14 [mem 0xfed03000-0xfed03fff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 15 [mem 0xfed06000-0xfed06fff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 16 [mem 0xfed08000-0xfed09fff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 17 [mem 0xfed80000-0xfedbffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 18 [mem 0xfed1c000-0xfed1cfff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:00: resource 19 [mem 0xfee00000-0xfeefffff window]
lug 11 23:00:09 mulo kernel: pci_bus 0000:01: resource 1 [mem 0xa1200000-0xa12fffff]
lug 11 23:00:09 mulo kernel: pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
lug 11 23:00:09 mulo kernel: pci_bus 0000:02: resource 1 [mem 0xa1100000-0xa11fffff]
lug 11 23:00:09 mulo kernel: PCI: CLS 64 bytes, default 64
lug 11 23:00:09 mulo kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
lug 11 23:00:09 mulo kernel: software IO TLB: mapped [mem 0x000000006ede3000-0x0000000072de3000] (64MB)
lug 11 23:00:09 mulo kernel: Trying to unpack rootfs image as initramfs...
lug 11 23:00:09 mulo kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns
lug 11 23:00:09 mulo kernel: clocksource: Switched to clocksource tsc
lug 11 23:00:09 mulo kernel: Initialise system trusted keyrings
lug 11 23:00:09 mulo kernel: Key type blacklist registered
lug 11 23:00:09 mulo kernel: workingset: timestamp_bits=36 max_order=21 bucket_order=0
lug 11 23:00:09 mulo kernel: fuse: init (API version 7.41)
lug 11 23:00:09 mulo kernel: integrity: Platform Keyring initialized
lug 11 23:00:09 mulo kernel: integrity: Machine keyring initialized
lug 11 23:00:09 mulo kernel: Key type asymmetric registered
lug 11 23:00:09 mulo kernel: Asymmetric key parser 'x509' registered
lug 11 23:00:09 mulo kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
lug 11 23:00:09 mulo kernel: io scheduler mq-deadline registered
lug 11 23:00:09 mulo kernel: io scheduler kyber registered
lug 11 23:00:09 mulo kernel: io scheduler bfq registered
lug 11 23:00:09 mulo kernel: ledtrig-cpu: registered to indicate activity on CPUs
lug 11 23:00:09 mulo kernel: pcieport 0000:00:13.0: PME: Signaling with IRQ 120
lug 11 23:00:09 mulo kernel: pcieport 0000:00:13.2: PME: Signaling with IRQ 121
lug 11 23:00:09 mulo kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lug 11 23:00:09 mulo kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
lug 11 23:00:09 mulo kernel: ACPI: button: Power Button [PWRB]
lug 11 23:00:09 mulo kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
lug 11 23:00:09 mulo kernel: ACPI: button: Sleep Button [SLPB]
lug 11 23:00:09 mulo kernel: thermal LNXTHERM:00: registered as thermal_zone0
lug 11 23:00:09 mulo kernel: ACPI: thermal: Thermal Zone [TZ01] (61 C)
lug 11 23:00:09 mulo kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
lug 11 23:00:09 mulo kernel: Non-volatile memory driver v1.3
lug 11 23:00:09 mulo kernel: Linux agpgart interface v0.103
lug 11 23:00:09 mulo kernel: ACPI: bus type drm_connector registered
lug 11 23:00:09 mulo kernel: ahci 0000:00:12.0: version 3.0
lug 11 23:00:09 mulo kernel: ahci 0000:00:12.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
lug 11 23:00:09 mulo kernel: ahci 0000:00:12.0: 2/2 ports implemented (port mask 0x3)
lug 11 23:00:09 mulo kernel: ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst 
lug 11 23:00:09 mulo kernel: scsi host0: ahci
lug 11 23:00:09 mulo kernel: scsi host1: ahci
lug 11 23:00:09 mulo kernel: ata1: SATA max UDMA/133 abar m2048@0xa131d000 port 0xa131d100 irq 122 lpm-pol 3
lug 11 23:00:09 mulo kernel: ata2: SATA max UDMA/133 abar m2048@0xa131d000 port 0xa131d180 irq 122 lpm-pol 3
lug 11 23:00:09 mulo kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
lug 11 23:00:09 mulo kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
lug 11 23:00:09 mulo kernel: xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
lug 11 23:00:09 mulo kernel: xhci_hcd 0000:00:15.0: xHCI Host Controller
lug 11 23:00:09 mulo kernel: xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
lug 11 23:00:09 mulo kernel: xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
lug 11 23:00:09 mulo kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
lug 11 23:00:09 mulo kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
lug 11 23:00:09 mulo kernel: usb usb1: Product: xHCI Host Controller
lug 11 23:00:09 mulo kernel: usb usb1: Manufacturer: Linux 6.12.36-1-lts xhci-hcd
lug 11 23:00:09 mulo kernel: usb usb1: SerialNumber: 0000:00:15.0
lug 11 23:00:09 mulo kernel: hub 1-0:1.0: USB hub found
lug 11 23:00:09 mulo kernel: hub 1-0:1.0: 9 ports detected
lug 11 23:00:09 mulo kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
lug 11 23:00:09 mulo kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
lug 11 23:00:09 mulo kernel: usb usb2: Product: xHCI Host Controller
lug 11 23:00:09 mulo kernel: usb usb2: Manufacturer: Linux 6.12.36-1-lts xhci-hcd
lug 11 23:00:09 mulo kernel: usb usb2: SerialNumber: 0000:00:15.0
lug 11 23:00:09 mulo kernel: hub 2-0:1.0: USB hub found
lug 11 23:00:09 mulo kernel: hub 2-0:1.0: 7 ports detected
lug 11 23:00:09 mulo kernel: usbcore: registered new interface driver usbserial_generic
lug 11 23:00:09 mulo kernel: usbserial: USB Serial support registered for generic
lug 11 23:00:09 mulo kernel: rtc_cmos 00:03: RTC can wake from S4
lug 11 23:00:09 mulo kernel: rtc_cmos 00:03: registered as rtc0
lug 11 23:00:09 mulo kernel: rtc_cmos 00:03: setting system clock to 2025-07-11T20:57:57 UTC (1752267477)
lug 11 23:00:09 mulo kernel: rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
lug 11 23:00:09 mulo kernel: intel_pstate: Intel P-state driver initializing
lug 11 23:00:09 mulo kernel: simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
lug 11 23:00:09 mulo kernel: [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
lug 11 23:00:09 mulo kernel: fbcon: Deferring console take-over
lug 11 23:00:09 mulo kernel: simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
lug 11 23:00:09 mulo kernel: hid: raw HID events driver (C) Jiri Kosina
lug 11 23:00:09 mulo kernel: drop_monitor: Initializing network drop monitor service
lug 11 23:00:09 mulo kernel: NET: Registered PF_INET6 protocol family
lug 11 23:00:09 mulo kernel: Freeing initrd memory: 31692K
lug 11 23:00:09 mulo kernel: Segment Routing with IPv6
lug 11 23:00:09 mulo kernel: RPL Segment Routing with IPv6
lug 11 23:00:09 mulo kernel: In-situ OAM (IOAM) with IPv6
lug 11 23:00:09 mulo kernel: NET: Registered PF_PACKET protocol family
lug 11 23:00:09 mulo kernel: microcode: Current revision: 0x00000026
lug 11 23:00:09 mulo kernel: microcode: Updated early from: 0x0000001a
lug 11 23:00:09 mulo kernel: resctrl: L2 allocation detected
lug 11 23:00:09 mulo kernel: IPI shorthand broadcast: enabled
lug 11 23:00:09 mulo kernel: sched_clock: Marking stable (533337172, 4044984)->(540904348, -3522192)
lug 11 23:00:09 mulo kernel: registered taskstats version 1
lug 11 23:00:09 mulo kernel: Loading compiled-in X.509 certificates
lug 11 23:00:09 mulo kernel: Loaded X.509 cert 'Build time autogenerated kernel key: eee451ffdd9026577431c4c9a3bfa8216a157637'
lug 11 23:00:09 mulo kernel: zswap: loaded using pool zstd/zsmalloc
lug 11 23:00:09 mulo kernel: Demotion targets for Node 0: null
lug 11 23:00:09 mulo kernel: Key type .fscrypt registered
lug 11 23:00:09 mulo kernel: Key type fscrypt-provisioning registered
lug 11 23:00:09 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 11 23:00:09 mulo kernel: integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
lug 11 23:00:09 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 11 23:00:09 mulo kernel: integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
lug 11 23:00:09 mulo kernel: integrity: Loading X.509 certificate: UEFI:db
lug 11 23:00:09 mulo kernel: integrity: Loaded X.509 cert 'CISD FW Update - Certificate: 068268b4a41c93854262d49b4f788f13'
lug 11 23:00:09 mulo kernel: PM:   Magic number: 1:398:1003
lug 11 23:00:09 mulo kernel: input input0: hash matches
lug 11 23:00:09 mulo kernel: pci_express 0000:00:13.0:pcie010: hash matches
lug 11 23:00:09 mulo kernel: vc vcs: hash matches
lug 11 23:00:09 mulo kernel: memory memory42: hash matches
lug 11 23:00:09 mulo kernel: RAS: Correctable Errors collector initialized.
lug 11 23:00:09 mulo kernel: clk: Disabling unused clocks
lug 11 23:00:09 mulo kernel: PM: genpd: Disabling unused power domains
lug 11 23:00:09 mulo kernel: usb 1-1: new high-speed USB device number 2 using xhci_hcd
lug 11 23:00:09 mulo kernel: ata2: SATA link down (SStatus 4 SControl 300)
lug 11 23:00:09 mulo kernel: usb 1-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 0.03
lug 11 23:00:09 mulo kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 11 23:00:09 mulo kernel: usb 1-1: Product: USB2.1 Hub
lug 11 23:00:09 mulo kernel: usb 1-1: Manufacturer: Generic
lug 11 23:00:09 mulo kernel: hub 1-1:1.0: USB hub found
lug 11 23:00:09 mulo kernel: hub 1-1:1.0: 4 ports detected
lug 11 23:00:09 mulo kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
lug 11 23:00:09 mulo kernel: ata1.00: Model 'Samsung SSD 860 EVO 250GB', rev 'RVT01B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati
lug 11 23:00:09 mulo kernel: ata1.00: supports DRM functions and may not be fully accessible
lug 11 23:00:09 mulo kernel: ata1.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
lug 11 23:00:09 mulo kernel: ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
lug 11 23:00:09 mulo kernel: ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
lug 11 23:00:09 mulo kernel: ata1.00: supports DRM functions and may not be fully accessible
lug 11 23:00:09 mulo kernel: ata1.00: configured for UDMA/133
lug 11 23:00:09 mulo kernel: ahci 0000:00:12.0: port does not support device sleep
lug 11 23:00:09 mulo kernel: scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
lug 11 23:00:09 mulo kernel: ata1.00: Enabling discard_zeroes_data
lug 11 23:00:09 mulo kernel: sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
lug 11 23:00:09 mulo kernel: sd 0:0:0:0: [sda] Write Protect is off
lug 11 23:00:09 mulo kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
lug 11 23:00:09 mulo kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 23:00:09 mulo kernel: sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
lug 11 23:00:09 mulo kernel: ata1.00: Enabling discard_zeroes_data
lug 11 23:00:09 mulo kernel: usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
lug 11 23:00:09 mulo kernel:  sda: sda1 sda2
lug 11 23:00:09 mulo kernel: sd 0:0:0:0: [sda] supports TCG Opal
lug 11 23:00:09 mulo kernel: sd 0:0:0:0: [sda] Attached SCSI disk
lug 11 23:00:09 mulo kernel: Freeing unused decrypted memory: 2028K
lug 11 23:00:09 mulo kernel: Freeing unused kernel image (initmem) memory: 4288K
lug 11 23:00:09 mulo kernel: Write protecting the kernel read-only data: 34816k
lug 11 23:00:09 mulo kernel: Freeing unused kernel image (rodata/data gap) memory: 2032K
lug 11 23:00:09 mulo kernel: usb 2-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 0.03
lug 11 23:00:09 mulo kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 11 23:00:09 mulo kernel: usb 2-1: Product: USB3.2 Hub
lug 11 23:00:09 mulo kernel: usb 2-1: Manufacturer: Generic
lug 11 23:00:09 mulo kernel: hub 2-1:1.0: USB hub found
lug 11 23:00:09 mulo kernel: hub 2-1:1.0: 4 ports detected
lug 11 23:00:09 mulo kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
lug 11 23:00:09 mulo kernel: rodata_test: all tests were successful
lug 11 23:00:09 mulo kernel: Run /init as init process
lug 11 23:00:09 mulo kernel:   with arguments:
lug 11 23:00:09 mulo kernel:     /init
lug 11 23:00:09 mulo kernel:   with environment:
lug 11 23:00:09 mulo kernel:     HOME=/
lug 11 23:00:09 mulo kernel:     TERM=linux
lug 11 23:00:09 mulo kernel:     BOOT_IMAGE=/vmlinuz-linux-lts
lug 11 23:00:09 mulo kernel:     cryptdevice=UUID=0f527340-6ad3-4f76-a081-a398e7c937f1:encrypted_lvm
lug 11 23:00:09 mulo kernel: usb 1-9: new full-speed USB device number 3 using xhci_hcd
lug 11 23:00:09 mulo kernel: usb 1-9: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
lug 11 23:00:09 mulo kernel: usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
lug 11 23:00:09 mulo kernel: rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
lug 11 23:00:09 mulo kernel: cryptd: max_cpu_qlen set to 1000
lug 11 23:00:09 mulo kernel: sdhci: Secure Digital Host Controller Interface driver
lug 11 23:00:09 mulo kernel: sdhci: Copyright(c) Pierre Ossman
lug 11 23:00:09 mulo kernel: sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 6)
lug 11 23:00:09 mulo kernel: mmc0: CQHCI version 5.10
lug 11 23:00:09 mulo kernel: mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
lug 11 23:00:09 mulo kernel: usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
lug 11 23:00:09 mulo kernel: usb 2-2: New USB device found, idVendor=152d, idProduct=0576, bcdDevice=41.01
lug 11 23:00:09 mulo kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
lug 11 23:00:09 mulo kernel: usb 2-2: Product: ANKEJE USB3.0
lug 11 23:00:09 mulo kernel: usb 2-2: Manufacturer: ANKEJE USB3.0
lug 11 23:00:09 mulo kernel: usb 2-2: SerialNumber: DD56419883014
lug 11 23:00:09 mulo kernel: usb 1-1.1: new full-speed USB device number 4 using xhci_hcd
lug 11 23:00:09 mulo kernel: mmc0: Failed to initialize a non-removable card
lug 11 23:00:09 mulo kernel: usb 1-1.1: New USB device found, idVendor=1997, idProduct=2433, bcdDevice=20.12
lug 11 23:00:09 mulo kernel: usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
lug 11 23:00:09 mulo kernel: usb 1-1.1: Product: Mini Keyboard
lug 11 23:00:09 mulo kernel: usb 1-1.1: Manufacturer:  
lug 11 23:00:09 mulo kernel: usbcore: registered new interface driver usbhid
lug 11 23:00:09 mulo kernel: usbhid: USB HID core driver
lug 11 23:00:09 mulo kernel: input:   Mini Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1997:2433.0001/input/input2
lug 11 23:00:09 mulo kernel: usb 2-1.2: new SuperSpeed USB device number 4 using xhci_hcd
lug 11 23:00:09 mulo kernel: usb 2-1.2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 11 23:00:09 mulo kernel: usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 23:00:09 mulo kernel: usb 2-1.2: Product: ASM105x
lug 11 23:00:09 mulo kernel: usb 2-1.2: Manufacturer: ASMT
lug 11 23:00:09 mulo kernel: usb 2-1.2: SerialNumber: 12345679818C
lug 11 23:00:09 mulo kernel: hid-generic 0003:1997:2433.0001: input,hidraw0: USB HID v1.01 Keyboard [  Mini Keyboard] on usb-0000:00:15.0-1.1/input0
lug 11 23:00:09 mulo kernel: input:   Mini Keyboard Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1997:2433.0002/input/input3
lug 11 23:00:09 mulo kernel: input:   Mini Keyboard System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1997:2433.0002/input/input4
lug 11 23:00:09 mulo kernel: usb 2-3: new SuperSpeed USB device number 5 using xhci_hcd
lug 11 23:00:09 mulo kernel: input:   Mini Keyboard Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1997:2433.0002/input/input5
lug 11 23:00:09 mulo kernel: hid-generic 0003:1997:2433.0002: input,hidraw1: USB HID v1.01 Mouse [  Mini Keyboard] on usb-0000:00:15.0-1.1/input1
lug 11 23:00:09 mulo kernel: usb 2-3: New USB device found, idVendor=1058, idProduct=1230, bcdDevice=10.50
lug 11 23:00:09 mulo kernel: usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 23:00:09 mulo kernel: usb 2-3: Product: My Book 1230
lug 11 23:00:09 mulo kernel: usb 2-3: Manufacturer: Western Digital
lug 11 23:00:09 mulo kernel: usb 2-3: SerialNumber: 574343344530393137333939
lug 11 23:00:09 mulo kernel: usb 2-4: new SuperSpeed USB device number 6 using xhci_hcd
lug 11 23:00:09 mulo kernel: usb 2-4: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 11 23:00:09 mulo kernel: usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 23:00:09 mulo kernel: usb 2-4: Product: Ugreen Storage Device
lug 11 23:00:09 mulo kernel: usb 2-4: Manufacturer: Ugreen
lug 11 23:00:09 mulo kernel: usb 2-4: SerialNumber: 022004019C85
lug 11 23:00:09 mulo kernel: usb 2-2: UAS is ignored for this device, using usb-storage instead
lug 11 23:00:09 mulo kernel: usb-storage 2-2:1.0: USB Mass Storage device detected
lug 11 23:00:09 mulo kernel: usb-storage 2-2:1.0: Quirks match for vid 152d pid 0576: 800000
lug 11 23:00:09 mulo kernel: scsi host2: usb-storage 2-2:1.0
lug 11 23:00:09 mulo kernel: usb 2-1.2: UAS is ignored for this device, using usb-storage instead
lug 11 23:00:09 mulo kernel: usb-storage 2-1.2:1.0: USB Mass Storage device detected
lug 11 23:00:09 mulo kernel: usb-storage 2-1.2:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 11 23:00:09 mulo kernel: scsi host3: usb-storage 2-1.2:1.0
lug 11 23:00:09 mulo kernel: usb-storage 2-3:1.0: USB Mass Storage device detected
lug 11 23:00:09 mulo kernel: usb-storage 2-3:1.0: Quirks match for vid 1058 pid 1230: 800000
lug 11 23:00:09 mulo kernel: scsi host4: usb-storage 2-3:1.0
lug 11 23:00:09 mulo kernel: usb 2-4: UAS is ignored for this device, using usb-storage instead
lug 11 23:00:09 mulo kernel: usb-storage 2-4:1.0: USB Mass Storage device detected
lug 11 23:00:09 mulo kernel: usb-storage 2-4:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 11 23:00:09 mulo kernel: scsi host5: usb-storage 2-4:1.0
lug 11 23:00:09 mulo kernel: usbcore: registered new interface driver usb-storage
lug 11 23:00:09 mulo kernel: usbcore: registered new interface driver uas
lug 11 23:00:09 mulo kernel: device-mapper: uevent: version 1.0.3
lug 11 23:00:09 mulo kernel: device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
lug 11 23:00:09 mulo kernel: Key type encrypted registered
lug 11 23:00:09 mulo kernel: fbcon: Taking over console
lug 11 23:00:09 mulo kernel: Console: switching to colour frame buffer device 128x48
lug 11 23:00:09 mulo kernel: scsi 5:0:0:0: Direct-Access     TOSHIBA  MQ01ABD100       0    PQ: 0 ANSI: 6
lug 11 23:00:09 mulo kernel: scsi 3:0:0:0: Direct-Access     ASMT     ASM105x          0    PQ: 0 ANSI: 6
lug 11 23:00:09 mulo kernel: scsi 4:0:0:0: Direct-Access     WD       My Book 1230     1050 PQ: 0 ANSI: 6
lug 11 23:00:09 mulo kernel: scsi 2:0:0:0: Direct-Access     ANKEJE   USB3.0           4101 PQ: 0 ANSI: 6
lug 11 23:00:09 mulo kernel: scsi 4:0:0:1: Enclosure         WD       SES Device       1050 PQ: 0 ANSI: 6
lug 11 23:00:09 mulo kernel: sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 11 23:00:09 mulo kernel: sd 3:0:0:0: [sdc] 4096-byte physical blocks
lug 11 23:00:09 mulo kernel: sd 3:0:0:0: [sdc] Write Protect is off
lug 11 23:00:09 mulo kernel: sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00
lug 11 23:00:09 mulo kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 23:00:09 mulo kernel: sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 11 23:00:09 mulo kernel: sd 5:0:0:0: [sdb] 4096-byte physical blocks
lug 11 23:00:09 mulo kernel: sd 5:0:0:0: [sdb] Write Protect is off
lug 11 23:00:09 mulo kernel: sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
lug 11 23:00:09 mulo kernel: sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 23:00:09 mulo kernel: sd 4:0:0:0: [sdd] 976746240 4096-byte logical blocks: (4.00 TB/3.64 TiB)
lug 11 23:00:09 mulo kernel: sd 4:0:0:0: [sdd] Write Protect is off
lug 11 23:00:09 mulo kernel: sd 4:0:0:0: [sdd] Mode Sense: 53 00 10 08
lug 11 23:00:09 mulo kernel: sd 4:0:0:0: [sdd] No Caching mode page found
lug 11 23:00:09 mulo kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
lug 11 23:00:09 mulo kernel: sd 2:0:0:0: [sde] 500118192 512-byte logical blocks: (256 GB/238 GiB)
lug 11 23:00:09 mulo kernel: sd 2:0:0:0: [sde] Write Protect is off
lug 11 23:00:09 mulo kernel: sd 2:0:0:0: [sde] Mode Sense: 47 00 00 08
lug 11 23:00:09 mulo kernel: sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 23:00:09 mulo kernel:  sdd: sdd1
lug 11 23:00:09 mulo kernel: sd 4:0:0:0: [sdd] Attached SCSI disk
lug 11 23:00:09 mulo kernel:  sdc: sdc1
lug 11 23:00:09 mulo kernel: sd 3:0:0:0: [sdc] Attached SCSI disk
lug 11 23:00:09 mulo kernel:  sde: sde1
lug 11 23:00:09 mulo kernel: sd 2:0:0:0: [sde] Attached SCSI disk
lug 11 23:00:09 mulo kernel:  sdb: sdb1
lug 11 23:00:09 mulo kernel: sd 5:0:0:0: [sdb] Attached SCSI disk
lug 11 23:00:09 mulo kernel: scsi 4:0:0:1: Failed to get diagnostic page 0x1
lug 11 23:00:09 mulo kernel: scsi 4:0:0:1: Failed to bind enclosure -19
lug 11 23:00:09 mulo kernel: ses 4:0:0:1: Attached Enclosure device
lug 11 23:00:09 mulo kernel: EXT4-fs (dm-1): mounted filesystem 16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12 r/w with ordered data mode. Quota mode: none.
lug 11 23:00:09 mulo systemd[1]: systemd 257.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
lug 11 23:00:09 mulo systemd[1]: Detected architecture x86-64.
lug 11 23:00:09 mulo systemd[1]: Hostname set to <mulo>.
lug 11 23:00:09 mulo systemd[1]: bpf-restrict-fs: LSM BPF program attached
lug 11 23:00:09 mulo systemd[1]: Queued start job for default target Graphical Interface.
lug 11 23:00:09 mulo systemd[1]: Created slice Slice /system/dirmngr.
lug 11 23:00:09 mulo systemd[1]: Created slice Slice /system/getty.
lug 11 23:00:09 mulo systemd[1]: Created slice Slice /system/gpg-agent.
lug 11 23:00:09 mulo systemd[1]: Created slice Slice /system/gpg-agent-browser.
lug 11 23:00:09 mulo systemd[1]: Created slice Slice /system/gpg-agent-extra.
lug 11 23:00:09 mulo systemd[1]: Created slice Slice /system/gpg-agent-ssh.
lug 11 23:00:09 mulo systemd[1]: Created slice Slice /system/keyboxd.
lug 11 23:00:09 mulo systemd[1]: Created slice Slice /system/modprobe.
lug 11 23:00:09 mulo systemd[1]: Created slice Encrypted Volume Units Service Slice.
lug 11 23:00:09 mulo systemd[1]: Created slice Slice /system/systemd-fsck.
lug 11 23:00:09 mulo systemd[1]: Created slice Slice /system/vncserver.
lug 11 23:00:09 mulo systemd[1]: Created slice User and Session Slice.
lug 11 23:00:09 mulo systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
lug 11 23:00:09 mulo systemd[1]: Started Forward Password Requests to Wall Directory Watch.
lug 11 23:00:09 mulo systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
lug 11 23:00:09 mulo systemd[1]: Expecting device /dev/disk/by-uuid/00d46560-89a9-4027-93d5-71fa2c8e247e...
lug 11 23:00:09 mulo systemd[1]: Expecting device /dev/disk/by-uuid/245c388e-dec5-4ba7-adf9-c4da95835a16...
lug 11 23:00:09 mulo systemd[1]: Expecting device /dev/disk/by-uuid/6401ad98-a5cf-4ccd-bc97-90d098f9368f...
lug 11 23:00:09 mulo systemd[1]: Expecting device /dev/disk/by-uuid/9f40d3cb-e5ce-4877-bf27-e57d966cd4a4...
lug 11 23:00:09 mulo systemd[1]: Expecting device /dev/disk/by-uuid/BD2A-C15F...
lug 11 23:00:09 mulo systemd[1]: Expecting device /dev/disk/by-uuid/c561c919-b617-492a-830c-74ababade132...
lug 11 23:00:09 mulo systemd[1]: Expecting device /dev/disk/by-uuid/d405b74f-f22e-4973-86de-a17460f2b1af...
lug 11 23:00:09 mulo systemd[1]: Expecting device /dev/disk/by-uuid/daa95dca-bdba-4e23-ac42-5e9cc33053bc...
lug 11 23:00:09 mulo systemd[1]: Expecting device /dev/disk/by-uuid/dad2d9f0-d032-4959-a92a-b15945b9867b...
lug 11 23:00:09 mulo systemd[1]: Expecting device /dev/disk/by-uuid/e10ab897-b1af-45c8-bb93-9a85d0561900...
lug 11 23:00:09 mulo systemd[1]: Reached target Local Encrypted Volumes.
lug 11 23:00:09 mulo systemd[1]: Reached target Login Prompts.
lug 11 23:00:09 mulo systemd[1]: Reached target Local Integrity Protected Volumes.
lug 11 23:00:09 mulo systemd[1]: Reached target Path Units.
lug 11 23:00:09 mulo systemd[1]: Reached target Remote File Systems.
lug 11 23:00:09 mulo systemd[1]: Reached target Slice Units.
lug 11 23:00:09 mulo systemd[1]: Reached target Swaps.
lug 11 23:00:09 mulo systemd[1]: Reached target Local Verity Protected Volumes.
lug 11 23:00:09 mulo systemd[1]: Listening on Device-mapper event daemon FIFOs.
lug 11 23:00:09 mulo systemd[1]: Listening on LVM2 poll daemon socket.
lug 11 23:00:09 mulo systemd[1]: Listening on Process Core Dump Socket.
lug 11 23:00:09 mulo systemd[1]: Listening on Credential Encryption/Decryption.
lug 11 23:00:09 mulo systemd[1]: Listening on Journal Socket (/dev/log).
lug 11 23:00:09 mulo systemd[1]: Listening on Journal Sockets.
lug 11 23:00:09 mulo systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 23:00:09 mulo systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 23:00:09 mulo systemd[1]: Listening on udev Control Socket.
lug 11 23:00:09 mulo systemd[1]: Listening on udev Kernel Socket.
lug 11 23:00:09 mulo systemd[1]: Mounting Huge Pages File System...
lug 11 23:00:09 mulo systemd[1]: Mounting POSIX Message Queue File System...
lug 11 23:00:09 mulo systemd[1]: Mounting Kernel Debug File System...
lug 11 23:00:09 mulo systemd[1]: Mounting Kernel Trace File System...
lug 11 23:00:09 mulo systemd[1]: Mounting Temporary Directory /tmp...
lug 11 23:00:09 mulo systemd[1]: Starting Create List of Static Device Nodes...
lug 11 23:00:09 mulo systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
lug 11 23:00:09 mulo systemd[1]: Starting Load Kernel Module configfs...
lug 11 23:00:09 mulo systemd[1]: Starting Load Kernel Module dm_mod...
lug 11 23:00:09 mulo systemd[1]: Starting Load Kernel Module drm...
lug 11 23:00:09 mulo systemd[1]: Starting Load Kernel Module fuse...
lug 11 23:00:09 mulo systemd[1]: Starting Load Kernel Module loop...
lug 11 23:00:09 mulo systemd[1]: Starting Mullvad early boot network blocker...
lug 11 23:00:09 mulo systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
lug 11 23:00:09 mulo systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
lug 11 23:00:09 mulo systemd[1]: Starting Journal Service...
lug 11 23:00:09 mulo systemd[1]: Starting Load Kernel Modules...
lug 11 23:00:09 mulo systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 23:00:09 mulo systemd[1]: Starting Remount Root and Kernel File Systems...
lug 11 23:00:09 mulo systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 23:00:09 mulo kernel: loop: module loaded
lug 11 23:00:09 mulo systemd[1]: Starting Load udev Rules from Credentials...
lug 11 23:00:09 mulo systemd[1]: Starting Coldplug All udev Devices...
lug 11 23:00:09 mulo systemd[1]: Mounted Huge Pages File System.
lug 11 23:00:09 mulo systemd[1]: Mounted POSIX Message Queue File System.
lug 11 23:00:09 mulo systemd[1]: Mounted Kernel Debug File System.
lug 11 23:00:09 mulo systemd[1]: Mounted Kernel Trace File System.
lug 11 23:00:09 mulo systemd[1]: Mounted Temporary Directory /tmp.
lug 11 23:00:09 mulo systemd[1]: Finished Create List of Static Device Nodes.
lug 11 23:00:09 mulo systemd[1]: modprobe@configfs.service: Deactivated successfully.
lug 11 23:00:09 mulo systemd[1]: Finished Load Kernel Module configfs.
lug 11 23:00:09 mulo systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
lug 11 23:00:09 mulo systemd[1]: Finished Load Kernel Module dm_mod.
lug 11 23:00:09 mulo systemd[1]: modprobe@drm.service: Deactivated successfully.
lug 11 23:00:09 mulo systemd[1]: Finished Load Kernel Module drm.
lug 11 23:00:09 mulo systemd[1]: modprobe@fuse.service: Deactivated successfully.
lug 11 23:00:09 mulo systemd[1]: Finished Load Kernel Module fuse.
lug 11 23:00:09 mulo systemd[1]: modprobe@loop.service: Deactivated successfully.
lug 11 23:00:09 mulo systemd[1]: Finished Load Kernel Module loop.
lug 11 23:00:09 mulo systemd[1]: Mounting FUSE Control File System...
lug 11 23:00:09 mulo systemd[1]: Mounting Kernel Configuration File System...
lug 11 23:00:09 mulo systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
lug 11 23:00:09 mulo systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
lug 11 23:00:09 mulo kernel: EXT4-fs (dm-1): re-mounted 16b7b8e3-6fac-49d4-9b3c-3c03e2dc3e12.
lug 11 23:00:09 mulo systemd[1]: Finished Load Kernel Modules.
lug 11 23:00:09 mulo systemd[1]: Finished Remount Root and Kernel File Systems.
lug 11 23:00:09 mulo systemd[1]: Finished Load udev Rules from Credentials.
lug 11 23:00:09 mulo systemd-journald[391]: Collecting audit messages is disabled.
lug 11 23:00:09 mulo systemd[1]: Mounted FUSE Control File System.
lug 11 23:00:09 mulo systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
lug 11 23:00:09 mulo systemd[1]: Starting Load/Save OS Random Seed...
lug 11 23:00:09 mulo systemd[1]: Starting Apply Kernel Variables...
lug 11 23:00:09 mulo systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
lug 11 23:00:09 mulo systemd[1]: Mounted Kernel Configuration File System.
lug 11 23:00:09 mulo systemd[1]: Finished Apply Kernel Variables.
lug 11 23:00:09 mulo systemd[1]: Finished Load/Save OS Random Seed.
lug 11 23:00:09 mulo systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
lug 11 23:00:09 mulo systemd[1]: Create System Users was skipped because no trigger condition checks were met.
lug 11 23:00:09 mulo systemd[1]: Starting Network Name Resolution...
lug 11 23:00:09 mulo systemd[1]: Starting Network Time Synchronization...
lug 11 23:00:09 mulo systemd[1]: Starting Create Static Device Nodes in /dev...
lug 11 23:00:09 mulo systemd[1]: Started Journal Service.
lug 11 23:00:10 mulo systemd-journald[391]: Received client request to flush runtime journal.
lug 11 23:00:10 mulo kernel: mousedev: PS/2 mouse device common for all mice
lug 11 23:00:10 mulo kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
lug 11 23:00:10 mulo kernel: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
lug 11 23:00:10 mulo kernel: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
lug 11 23:00:10 mulo kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
lug 11 23:00:10 mulo kernel: cfg80211: failed to load regulatory.db
lug 11 23:00:10 mulo kernel: lpc_ich 0000:00:1f.0: No MFD cells added
lug 11 23:00:10 mulo kernel: input: PC Speaker as /devices/platform/pcspkr/input/input6
lug 11 23:00:10 mulo kernel: RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
lug 11 23:00:10 mulo kernel: RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
lug 11 23:00:10 mulo kernel: RAPL PMU: hw unit of domain package 2^-14 Joules
lug 11 23:00:10 mulo kernel: RAPL PMU: hw unit of domain dram 2^-14 Joules
lug 11 23:00:10 mulo kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
lug 11 23:00:10 mulo kernel: i801_smbus 0000:00:1f.1: SPD Write Disable is set
lug 11 23:00:10 mulo kernel: i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
lug 11 23:00:10 mulo kernel: i2c i2c-0: Successfully instantiated SPD at 0x50
lug 11 23:00:10 mulo kernel: Intel(R) Wireless WiFi driver for Linux
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: enabling device (0000 -> 0002)
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: Detected crf-id 0x2816, cnv-id 0x1000100 wfpm id 0x80000000
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: PCI dev 31dc/02a4, rev=0x312, rfid=0x108110
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: Detected Intel(R) Wireless-AC 9462
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 0
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 1
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 2
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 3
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 4
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 6
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 8
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 9
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 10
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 11
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 15
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 16
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 18
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 19
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 20
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 21
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: WRT: Overriding region id 28
lug 11 23:00:10 mulo kernel: iwlwifi 0000:00:0c.0: loaded firmware version 46.7e3e4b69.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
lug 11 23:00:10 mulo kernel: r8169 0000:02:00.0 eth0: RTL8168h/8111h, 1c:69:7a:af:b4:46, XID 541, IRQ 131
lug 11 23:00:10 mulo kernel: r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
lug 11 23:00:10 mulo kernel: pps_core: LinuxPPS API ver. 1 registered
lug 11 23:00:10 mulo kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
lug 11 23:00:10 mulo kernel: PTP clock support registered
lug 11 23:00:10 mulo kernel: Bluetooth: Core ver 2.22
lug 11 23:00:10 mulo kernel: NET: Registered PF_BLUETOOTH protocol family
lug 11 23:00:10 mulo kernel: Bluetooth: HCI device and connection manager initialized
lug 11 23:00:10 mulo kernel: Bluetooth: HCI socket layer initialized
lug 11 23:00:10 mulo kernel: Bluetooth: L2CAP socket layer initialized
lug 11 23:00:10 mulo kernel: Bluetooth: SCO socket layer initialized
lug 11 23:00:10 mulo kernel: r8169 0000:02:00.0 eno1: renamed from eth0
lug 11 23:00:11 mulo kernel: ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
lug 11 23:00:11 mulo kernel: iwlwifi 0000:00:0c.0: base HW address: 6c:94:66:56:44:a1, OTP minor version: 0x4
lug 11 23:00:11 mulo kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
lug 11 23:00:11 mulo kernel: iwlwifi 0000:00:0c.0 wlo2: renamed from wlan0
lug 11 23:00:11 mulo kernel: usbcore: registered new interface driver btusb
lug 11 23:00:11 mulo kernel: Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
lug 11 23:00:11 mulo kernel: Bluetooth: hci0: Device revision is 2
lug 11 23:00:11 mulo kernel: Bluetooth: hci0: Secure boot is enabled
lug 11 23:00:11 mulo kernel: Bluetooth: hci0: OTP lock is enabled
lug 11 23:00:11 mulo kernel: Bluetooth: hci0: API lock is enabled
lug 11 23:00:11 mulo kernel: Bluetooth: hci0: Debug lock is disabled
lug 11 23:00:11 mulo kernel: Bluetooth: hci0: Minimum firmware build 1 week 10 2014
lug 11 23:00:11 mulo kernel: Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
lug 11 23:00:11 mulo kernel: Bluetooth: hci0: Boot Address: 0x40800
lug 11 23:00:11 mulo kernel: Bluetooth: hci0: Firmware Version: 201-12.24
lug 11 23:00:11 mulo kernel: i915 0000:00:02.0: [drm] Unknown revision 0x06
lug 11 23:00:11 mulo kernel: i915 0000:00:02.0: [drm] Found GEMINILAKE (device ID 3184) display version 10.00 stepping **
lug 11 23:00:11 mulo kernel: i915 0000:00:02.0: [drm] Unknown revid 0x06
lug 11 23:00:11 mulo kernel: Console: switching to colour dummy device 80x25
lug 11 23:00:11 mulo kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
lug 11 23:00:11 mulo kernel: i915 0000:00:02.0: [drm] couldn't get memory information
lug 11 23:00:11 mulo kernel: i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
lug 11 23:00:11 mulo kernel: i915 0000:00:02.0: [drm] Applying Increase DDI Disabled quirk
lug 11 23:00:11 mulo kernel: i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
lug 11 23:00:11 mulo kernel: intel_telemetry_core Init
lug 11 23:00:11 mulo kernel: mei_hdcp 0000:00:0f.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
lug 11 23:00:11 mulo kernel: [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1
lug 11 23:00:11 mulo kernel: ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
lug 11 23:00:11 mulo kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
lug 11 23:00:11 mulo kernel: Invalid pltconfig, ensure IPC1 device is enabled in BIOS
lug 11 23:00:11 mulo kernel: snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
lug 11 23:00:11 mulo kernel: i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
lug 11 23:00:12 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
lug 11 23:00:12 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
lug 11 23:00:12 mulo kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
lug 11 23:00:12 mulo kernel: intel_rapl_common: Found RAPL domain package
lug 11 23:00:12 mulo kernel: intel_rapl_common: Found RAPL domain core
lug 11 23:00:12 mulo kernel: intel_rapl_common: Found RAPL domain uncore
lug 11 23:00:12 mulo kernel: intel_rapl_common: Found RAPL domain dram
lug 11 23:00:12 mulo kernel: Bluetooth: hci0: Waiting for firmware download to complete
lug 11 23:00:12 mulo kernel: Bluetooth: hci0: Firmware loaded in 1387672 usecs
lug 11 23:00:12 mulo kernel: Bluetooth: hci0: Waiting for device to boot
lug 11 23:00:12 mulo kernel: Bluetooth: hci0: Device booted in 13643 usecs
lug 11 23:00:12 mulo kernel: Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
lug 11 23:00:12 mulo kernel: Bluetooth: hci0: Applying Intel DDC parameters completed
lug 11 23:00:12 mulo kernel: Bluetooth: hci0: Firmware revision 0.1 build 201 week 12 2024
lug 11 23:00:12 mulo kernel: Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
lug 11 23:00:12 mulo kernel: EXT4-fs (dm-2): mounted filesystem 245c388e-dec5-4ba7-adf9-c4da95835a16 r/w with ordered data mode. Quota mode: none.
lug 11 23:00:13 mulo kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
lug 11 23:00:13 mulo kernel: Bluetooth: BNEP filters: protocol multicast
lug 11 23:00:13 mulo kernel: Bluetooth: BNEP socket layer initialized
lug 11 23:00:13 mulo kernel: Bluetooth: MGMT ver 1.23
lug 11 23:00:13 mulo kernel: NET: Registered PF_ALG protocol family
lug 11 23:00:13 mulo kernel: Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
lug 11 23:00:13 mulo kernel: EXT4-fs (dm-3): warning: mounting fs with errors, running e2fsck is recommended
lug 11 23:00:13 mulo kernel: EXT4-fs (dm-3): recovery complete
lug 11 23:00:13 mulo kernel: EXT4-fs (dm-3): mounted filesystem d405b74f-f22e-4973-86de-a17460f2b1af r/w with ordered data mode. Quota mode: none.
lug 11 23:00:13 mulo kernel: r8169 0000:02:00.0 eno1: Link is Down
lug 11 23:00:13 mulo kernel: iwlwifi 0000:00:0c.0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
lug 11 23:00:13 mulo kernel: iwlwifi 0000:00:0c.0: Registered PHC clock: iwlwifi-PTP, with index: 0
lug 11 23:00:13 mulo kernel: iwlwifi 0000:00:0c.0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
lug 11 23:00:14 mulo kernel: EXT4-fs (dm-5): mounted filesystem e10ab897-b1af-45c8-bb93-9a85d0561900 r/w with ordered data mode. Quota mode: none.
lug 11 23:00:15 mulo kernel: EXT4-fs (dm-4): recovery complete
lug 11 23:00:15 mulo kernel: EXT4-fs (dm-4): mounted filesystem 9f40d3cb-e5ce-4877-bf27-e57d966cd4a4 r/w with ordered data mode. Quota mode: none.
lug 11 23:00:16 mulo kernel: r8169 0000:02:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
lug 11 23:00:16 mulo kernel: Bluetooth: RFCOMM TTY layer initialized
lug 11 23:00:16 mulo kernel: Bluetooth: RFCOMM socket layer initialized
lug 11 23:00:16 mulo kernel: Bluetooth: RFCOMM ver 1.11
lug 11 23:00:18 mulo kernel: wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
lug 11 23:00:18 mulo kernel: wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
lug 11 23:05:14 mulo kernel: EXT4-fs (dm-3): error count since last fsck: 3
lug 11 23:05:14 mulo kernel: EXT4-fs (dm-3): initial error at time 1564406226: ext4_journal_check_start:56
lug 11 23:05:14 mulo kernel: EXT4-fs (dm-3): last error at time 1736005403: __ext4_find_entry:1683: inode 36454401
lug 11 23:05:58 mulo kernel: usb 2-4: USB disconnect, device number 6
lug 11 23:05:58 mulo kernel: EXT4-fs (dm-2): unmounting filesystem 245c388e-dec5-4ba7-adf9-c4da95835a16.
lug 11 23:05:58 mulo kernel: sd 5:0:0:0: [sdb] Synchronizing SCSI cache
lug 11 23:05:58 mulo kernel: sd 5:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
lug 11 23:05:58 mulo kernel: Buffer I/O error on dev dm-2, logical block 0, lost sync page write
lug 11 23:05:58 mulo kernel: EXT4-fs (dm-2): I/O error while writing superblock
lug 11 23:05:59 mulo kernel: usb 2-4: new SuperSpeed USB device number 7 using xhci_hcd
lug 11 23:05:59 mulo kernel: usb 2-4: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
lug 11 23:05:59 mulo kernel: usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 23:05:59 mulo kernel: usb 2-4: Product: Ugreen Storage Device
lug 11 23:05:59 mulo kernel: usb 2-4: Manufacturer: Ugreen
lug 11 23:05:59 mulo kernel: usb 2-4: SerialNumber: 022004019C85
lug 11 23:05:59 mulo kernel: usb 2-4: UAS is ignored for this device, using usb-storage instead
lug 11 23:05:59 mulo kernel: usb-storage 2-4:1.0: USB Mass Storage device detected
lug 11 23:05:59 mulo kernel: usb-storage 2-4:1.0: Quirks match for vid 174c pid 55aa: c00000
lug 11 23:05:59 mulo kernel: scsi host5: usb-storage 2-4:1.0
lug 11 23:06:00 mulo kernel: scsi 5:0:0:0: Direct-Access     TOSHIBA  MQ01ABD100       0    PQ: 0 ANSI: 6
lug 11 23:06:02 mulo kernel: sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
lug 11 23:06:02 mulo kernel: sd 5:0:0:0: [sdb] 4096-byte physical blocks
lug 11 23:06:02 mulo kernel: sd 5:0:0:0: [sdb] Write Protect is off
lug 11 23:06:02 mulo kernel: sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
lug 11 23:06:02 mulo kernel: sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 23:06:02 mulo kernel:  sdb: sdb1
lug 11 23:06:02 mulo kernel: sd 5:0:0:0: [sdb] Attached SCSI disk
lug 11 23:06:41 mulo kernel: usb 2-3: USB disconnect, device number 5
lug 11 23:06:41 mulo kernel: EXT4-fs (dm-3): unmounting filesystem d405b74f-f22e-4973-86de-a17460f2b1af.
lug 11 23:06:41 mulo kernel: Buffer I/O error on dev dm-3, logical block 488144896, lost sync page write
lug 11 23:06:41 mulo kernel: JBD2: I/O error when updating journal superblock for dm-3-8.
lug 11 23:06:41 mulo kernel: Aborting journal on device dm-3-8.
lug 11 23:06:41 mulo kernel: Buffer I/O error on dev dm-3, logical block 488144896, lost sync page write
lug 11 23:06:41 mulo kernel: JBD2: I/O error when updating journal superblock for dm-3-8.
lug 11 23:06:41 mulo kernel: EXT4-fs error (device dm-3): ext4_put_super:1318: comm umount: Couldn't clean up the journal
lug 11 23:06:41 mulo kernel: Buffer I/O error on dev dm-3, logical block 0, lost sync page write
lug 11 23:06:41 mulo kernel: EXT4-fs (dm-3): I/O error while writing superblock
lug 11 23:06:41 mulo kernel: EXT4-fs (dm-3): Remounting filesystem read-only
lug 11 23:06:41 mulo kernel: Buffer I/O error on dev dm-3, logical block 0, lost sync page write
lug 11 23:06:41 mulo kernel: EXT4-fs (dm-3): I/O error while writing superblock
lug 11 23:06:42 mulo kernel: usb 2-3: new SuperSpeed USB device number 8 using xhci_hcd
lug 11 23:06:42 mulo kernel: usb 2-3: New USB device found, idVendor=1058, idProduct=1230, bcdDevice=10.50
lug 11 23:06:42 mulo kernel: usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
lug 11 23:06:42 mulo kernel: usb 2-3: Product: My Book 1230
lug 11 23:06:42 mulo kernel: usb 2-3: Manufacturer: Western Digital
lug 11 23:06:42 mulo kernel: usb 2-3: SerialNumber: 574343344530393137333939
lug 11 23:06:42 mulo kernel: usb-storage 2-3:1.0: USB Mass Storage device detected
lug 11 23:06:42 mulo kernel: usb-storage 2-3:1.0: Quirks match for vid 1058 pid 1230: 800000
lug 11 23:06:42 mulo kernel: scsi host6: usb-storage 2-3:1.0
lug 11 23:06:43 mulo kernel: scsi 6:0:0:0: Direct-Access     WD       My Book 1230     1050 PQ: 0 ANSI: 6
lug 11 23:06:43 mulo kernel: scsi 6:0:0:1: Enclosure         WD       SES Device       1050 PQ: 0 ANSI: 6
lug 11 23:06:43 mulo kernel: ses 6:0:0:1: Attached Enclosure device
lug 11 23:06:43 mulo kernel: sd 6:0:0:0: [sdf] 976746240 4096-byte logical blocks: (4.00 TB/3.64 TiB)
lug 11 23:06:43 mulo kernel: ses 6:0:0:1: Failed to get diagnostic page 0x1
lug 11 23:06:43 mulo kernel: ses 6:0:0:1: Failed to bind enclosure -19
lug 11 23:06:43 mulo kernel: sd 6:0:0:0: [sdf] Write Protect is off
lug 11 23:06:43 mulo kernel: sd 6:0:0:0: [sdf] Mode Sense: 53 00 10 08
lug 11 23:06:43 mulo kernel: sd 6:0:0:0: [sdf] No Caching mode page found
lug 11 23:06:43 mulo kernel: sd 6:0:0:0: [sdf] Assuming drive cache: write through
lug 11 23:06:43 mulo kernel:  sdf: sdf1
lug 11 23:06:43 mulo kernel: sd 6:0:0:0: [sdf] Attached SCSI disk
lug 11 23:06:57 mulo kernel: usb 2-2: USB disconnect, device number 3
lug 11 23:06:57 mulo kernel: sd 2:0:0:0: [sde] Synchronizing SCSI cache
lug 11 23:06:57 mulo kernel: sd 2:0:0:0: [sde] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
lug 11 23:06:57 mulo kernel: EXT4-fs (dm-4): unmounting filesystem 9f40d3cb-e5ce-4877-bf27-e57d966cd4a4.
lug 11 23:06:57 mulo kernel: Buffer I/O error on dev dm-4, logical block 0, lost sync page write
lug 11 23:06:57 mulo kernel: EXT4-fs (dm-4): I/O error while writing superblock
lug 11 23:06:58 mulo kernel: usb 2-2: new SuperSpeed USB device number 9 using xhci_hcd
lug 11 23:06:58 mulo kernel: usb 2-2: New USB device found, idVendor=152d, idProduct=0576, bcdDevice=41.01
lug 11 23:06:58 mulo kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
lug 11 23:06:58 mulo kernel: usb 2-2: Product: ANKEJE USB3.0
lug 11 23:06:58 mulo kernel: usb 2-2: Manufacturer: ANKEJE USB3.0
lug 11 23:06:58 mulo kernel: usb 2-2: SerialNumber: DD56419883014
lug 11 23:06:58 mulo kernel: usb 2-2: UAS is ignored for this device, using usb-storage instead
lug 11 23:06:58 mulo kernel: usb-storage 2-2:1.0: USB Mass Storage device detected
lug 11 23:06:58 mulo kernel: usb-storage 2-2:1.0: Quirks match for vid 152d pid 0576: 800000
lug 11 23:06:58 mulo kernel: scsi host2: usb-storage 2-2:1.0
lug 11 23:06:59 mulo kernel: scsi 2:0:0:0: Direct-Access     ANKEJE   USB3.0           4101 PQ: 0 ANSI: 6
lug 11 23:06:59 mulo kernel: sd 2:0:0:0: [sde] 500118192 512-byte logical blocks: (256 GB/238 GiB)
lug 11 23:06:59 mulo kernel: sd 2:0:0:0: [sde] Write Protect is off
lug 11 23:06:59 mulo kernel: sd 2:0:0:0: [sde] Mode Sense: 47 00 00 08
lug 11 23:06:59 mulo kernel: sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lug 11 23:06:59 mulo kernel:  sde: sde1
lug 11 23:06:59 mulo kernel: sd 2:0:0:0: [sde] Attached SCSI disk

Edit: I also tried the zen kernel, same problem..

Last edited by pepper (2025-07-12 07:56:10)

seth · 2025-07-12 07:59:15

Latest log has multiple usb disconnects, so they're ally suffering from the same source.

lug 11 23:05:58 mulo kernel: usb 2-4: USB disconnect, device number 6
lug 11 23:06:41 mulo kernel: usb 2-3: USB disconnect, device number 5
lug 11 23:06:57 mulo kernel: usb 2-2: USB disconnect, device number 3

and along

if I downgrade the os with timeshift, the problems fully disappear

it's borderline impossible a some hardware response.

yes, LTS and also normal kernel

Means either it's not the kernel or the bug was backported into the stable tree (which as of recent is a quite unfortunate regular, I'll once again point out that this worked much better when Linus was swearing at people…)
Which one is the good kernel from your timeshift?
Try to downgrade that from the https://wiki.archlinux.org/title/Arch_Linux_Archive (downgrading the kernel in isolation is, unlike pretty much ever other package, typically ok if the version isn't all /that/ old)
=> Does the problem disappear w/ old kernel and current userspace?

pepper · 2025-07-12 13:40:09

The working lts kernel for me is 6.6.65-1-lts. The main kernel version at the time was 6.12.4-arch1-1 but for this I'm not sure if it's working, I used lts only.

I downgraded kernel-lts and kernel-lts-header to 6.6.65-1-lts using https://aur.archlinux.org/packages/downgrade and rebooted

uname -a

Linux mulo 6.6.65-1-lts #1 SMP PREEMPT_DYNAMIC Wed, 11 Dec 2024 15:35:54 +0000 x86_64 GNU/Linux

I waited hours, the problem seems fixed.. but now should I blacklist kernel and kernel-lts from pacman upgrades? Is there a bug thread for this issue that I can follow to know when I can upgrade?

Last edited by pepper (2025-07-12 14:21:57)

seth · 2025-07-12 14:06:49

Is there a bug thread for this issue that I can follow to know where I can upgrade?

We don't even really know where the problem is. The devices disconnect from the bus…

You might have to go on a bisection spree to narrow down which lts kernel breaks it.
Probably start w/ https://archive.archlinux.org/packages/ … kg.tar.zst and hope that it's not broken there (since it's a huge jump between 6.6 and 6.12)
If 6.12.10 is already affected, you'll have to poke around in the main kernels, https://archive.archlinux.org/packages/l/linux/
Bisection means to pick a kernel between a known good and a known bad one and depending on whether it's good or bad decide the following bracket to split (upper if it's good, lower if it's bad) - this way you can test the kernels at exponential speed which is MUCH faster than incrementing through them (there're gonna be ~140 kernels what will take 7-8 bisection steps)

Arch Linux

#1 2025-07-09 21:27:39

Since a recent update, my external luks hdd unmount after boot

#2 2025-07-10 06:19:24

Re: Since a recent update, my external luks hdd unmount after boot

#3 2025-07-10 06:57:18

Re: Since a recent update, my external luks hdd unmount after boot

#4 2025-07-10 08:18:32

Re: Since a recent update, my external luks hdd unmount after boot

#5 2025-07-10 10:25:18

Re: Since a recent update, my external luks hdd unmount after boot

#6 2025-07-10 14:27:32

Re: Since a recent update, my external luks hdd unmount after boot

#7 2025-07-10 15:56:47

Re: Since a recent update, my external luks hdd unmount after boot

#8 2025-07-10 22:41:42

Re: Since a recent update, my external luks hdd unmount after boot

#9 2025-07-11 07:27:20

Re: Since a recent update, my external luks hdd unmount after boot

#10 2025-07-11 08:23:06

Re: Since a recent update, my external luks hdd unmount after boot

#11 2025-07-11 09:19:32

Re: Since a recent update, my external luks hdd unmount after boot

#12 2025-07-11 16:35:02

Re: Since a recent update, my external luks hdd unmount after boot

#13 2025-07-11 17:08:23

Re: Since a recent update, my external luks hdd unmount after boot

#14 2025-07-11 17:25:54

Re: Since a recent update, my external luks hdd unmount after boot

#15 2025-07-11 20:11:58

Re: Since a recent update, my external luks hdd unmount after boot

#16 2025-07-11 21:07:52

Re: Since a recent update, my external luks hdd unmount after boot

#17 2025-07-12 07:59:15

Re: Since a recent update, my external luks hdd unmount after boot

#18 2025-07-12 13:40:09

Re: Since a recent update, my external luks hdd unmount after boot

#19 2025-07-12 14:06:49

Re: Since a recent update, my external luks hdd unmount after boot

Board footer