Arch Linux

Jazztache

Member

Registered: 2022-10-07

Posts: 63

[SOLVED] Valve Index USB - 'unable to enumerate USB device'

= Problem =

Hello!

Recently, I got a Valve Index, specially picked for compatibility with Arch Linux. I recently got a full software stack working with Envision, MonadoXR, Wlx-Overlay-S and Proton GE and great performance on a few games. I also played using SteamVR to get the room configuration, and that worked flawlessly as well, albeit with less performance compared to MonadoXR.

For the first 2 weeks or so I had no problems at all. I bought used, but the damage was only cosmetic and nothing seemed to be faulty hardware wise, especially since everything worked perfectly.

However, over the past couple of days (issues started on the 15th of this month), the HMD's USB connections stopped working on the VI (Valve Index).

Usually, I unplug and re-plug the cable that goes out from the HMD to the connector that goes to the Link Box.
Doing this, Launching Monado and playing games was working flawlessly as late at 10:30pm on the 14th.

Now, I cannot seem to get it connected, no matter what I try (see what I tried below).

I am able to get the *camera* working, and I later found out that the VI Link Box is basically an internal USB hub.
As of yesterday, rendering *was still working*. I could turn on Monado, and whilst my head wasn't tracked, rendering to the HMD was still working.
This tells me that the display was still working, and Monado could project to it.

When Monado doesn't detect a headset but can start an XR session, there is a simulated headset that bobs up and down lightly.
I could still see the simulated bobbing motion that Monado does, and launching games renders them to the HMD's display.
The VI's front lights even remain blue in standby mode, and would turn green when Monado is rendering to it.

Input however, stopped working entirely on the HMD. Both the controllers also would not send data. Motion data and button presses are not fed back to the computer.
Monado cannot detect the HMD or the controllers.

Yesterday, I managed to get a screenshot of it sporadically working, before i unplugged it and re-plugged it in order to try and see if it was working long-term. That was the last time I ever saw a sign of it working as intended. I can't send it because Imgur is over capacity.

However, I didn't know I was supposed to fully track what the vendor USB ID is for easier troubleshooting, so I may have accidentally made it harder for myself.

I am stuck on what I should do and how I should do it in regards to getting the USB detected and working again.

= What I have Tried =

I have tried the following to no avail.

- Unplugging All USBs from the back and leaving the VI to hog everything, using watch lsusb to do this.
- This this *BOTH* whilst the PC was active
- From coldboot
- Attempted to disable USB power management
    - Examples on the wiki don't show a way to universally turn it off. I do not know the USB Vendor ID of the Headset, so I cannot target it (paste link)
- Moving around USBs until it works
    - Didn't help, still the same errors just with different USB port numbers.

= Command Outputs =

`sudo dmesg` from cold boot

~ # sudo dmesg
[sudo] password for jazztache:
[    0.000000] Linux version 6.15.6-arch1-1 (linux@archlinux) (gcc (GCC) 15.1.1 20250425, GNU ld (GNU Binutils) 2.44.0) #1 SMP PREEMPT_DYNAMIC Thu, 10 Jul 2025 17:10:18 +0000
[    0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=854127f4-f586-4957-8a5f-e7a82a8e89a0 zswap.enabled=0 rw rootfstype=ext4
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d264fff] usable
[    0.000000] BIOS-e820: [mem 0x000000009d265000-0x000000009da64fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009da65000-0x000000009db94fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009db95000-0x000000009dd94fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009dd95000-0x000000009ec4efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ec4f000-0x000000009ec4ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009ec50000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] efi: EFI v2.7 by American Megatrends
[    0.000000] efi: ACPI=0x9dd0c000 ACPI 2.0=0x9dd0c014 SMBIOS=0x9e7ae000 SMBIOS 3.0=0x9e7ad000 MEMATTR=0x975e8018 ESRT=0x97d2ca98 RNG=0x9db1bf18 INITRD=0x97d2a218
[    0.000000] random: crng init done
[    0.000000] efi: Remove mem53: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[    0.000000] efi: Not removing mem54: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem55: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem56: MMIO range=[0xfed00000-0xfed03fff] (16KB) from e820 map
[    0.000000] efi: Not removing mem57: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem58: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 3.2.0 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. MS-7C76/MPG Z490M GAMING EDGE WIFI (MS-7C76), BIOS 2.20 07/23/2020
[    0.000000] DMI: Memory slots populated: 2/4
[    0.000000] tsc: Detected 3800.000 MHz processor
[    0.000000] tsc: Detected 3799.900 MHz TSC
[    0.000341] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000343] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000349] last_pfn = 0x45e000 max_arch_pfn = 0x400000000
[    0.000353] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[    0.000354] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000647] last_pfn = 0x9ec50 max_arch_pfn = 0x400000000
[    0.011929] esrt: Reserving ESRT space from 0x0000000097d2ca98 to 0x0000000097d2cad0.
[    0.011934] e820: update [mem 0x97d2c000-0x97d2cfff] usable ==> reserved
[    0.011946] Using GB pages for direct mapping
[    0.012263] Secure boot disabled
[    0.012263] RAMDISK: [mem 0x90e9e000-0x928acfff]
[    0.012334] ACPI: Early table checksum verification disabled
[    0.012336] ACPI: RSDP 0x000000009DD0C014 000024 (v02 ALASKA)
[    0.012339] ACPI: XSDT 0x000000009DD0B728 0000D4 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.012343] ACPI: FACP 0x000000009DB8D000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.012347] ACPI: DSDT 0x000000009DB49000 04354F (v02 ALASKA A M I    01072009 INTL 20160527)
[    0.012349] ACPI: FACS 0x000000009DD94000 000040
[    0.012351] ACPI: MCFG 0x000000009DB92000 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.012353] ACPI: SSDT 0x000000009DB8F000 0020AD (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.012355] ACPI: SSDT 0x000000009DB8E000 000A52 (v02 PmRef  ItbmSci  00003000 INTL 20160527)
[    0.012357] ACPI: FIDT 0x000000009DB48000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.012359] ACPI: SSDT 0x000000009DB44000 0031DA (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.012361] ACPI: SSDT 0x000000009DB41000 00276E (v02 Intel  PegSsdt  00001000 INTL 20160527)
[    0.012364] ACPI: HPET 0x000000009DB94000 000038 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.012366] ACPI: SSDT 0x000000009DB3F000 00147B (v02 ALASKA Ther_Rvp 00001000 INTL 20160527)
[    0.012368] ACPI: SSDT 0x000000009DB3B000 0032E7 (v02 INTEL  xh_cmsd4 00000000 INTL 20160527)
[    0.012370] ACPI: NHLT 0x000000009DB39000 001821 (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.012372] ACPI: LPIT 0x000000009DB93000 000094 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.012374] ACPI: SSDT 0x000000009DB35000 002720 (v02 ALASKA PtidDevc 00001000 INTL 20160527)
[    0.012376] ACPI: SSDT 0x000000009DB32000 0025B2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
[    0.012378] ACPI: DBGP 0x000000009DB31000 000034 (v01 ALASKA A M I    01072009 AMI  01000013)
[    0.012380] ACPI: DBG2 0x000000009DB30000 000054 (v00 ALASKA A M I    01072009 AMI  01000013)
[    0.012382] ACPI: SSDT 0x000000009DB2E000 001B67 (v02 ALASKA UsbCTabl 00001000 INTL 20160527)
[    0.012384] ACPI: VFCT 0x000000009DB1F000 00E284 (v01 ALASKA A M I    00000001 AMD  33504F47)
[    0.012386] ACPI: BGRT 0x000000009DB1E000 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.012388] ACPI: WSMT 0x000000009DB38000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.012390] ACPI: APIC 0x000000009DB1D000 00012C (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.012392] ACPI: FPDT 0x000000009DB1C000 000044 (v01 ALASKA CML      01072009 AMI  01000013)
[    0.012394] ACPI: Reserving FACP table memory at [mem 0x9db8d000-0x9db8d113]
[    0.012395] ACPI: Reserving DSDT table memory at [mem 0x9db49000-0x9db8c54e]
[    0.012396] ACPI: Reserving FACS table memory at [mem 0x9dd94000-0x9dd9403f]
[    0.012396] ACPI: Reserving MCFG table memory at [mem 0x9db92000-0x9db9203b]
[    0.012397] ACPI: Reserving SSDT table memory at [mem 0x9db8f000-0x9db910ac]
[    0.012398] ACPI: Reserving SSDT table memory at [mem 0x9db8e000-0x9db8ea51]
[    0.012398] ACPI: Reserving FIDT table memory at [mem 0x9db48000-0x9db4809b]
[    0.012399] ACPI: Reserving SSDT table memory at [mem 0x9db44000-0x9db471d9]
[    0.012399] ACPI: Reserving SSDT table memory at [mem 0x9db41000-0x9db4376d]
[    0.012400] ACPI: Reserving HPET table memory at [mem 0x9db94000-0x9db94037]
[    0.012400] ACPI: Reserving SSDT table memory at [mem 0x9db3f000-0x9db4047a]
[    0.012401] ACPI: Reserving SSDT table memory at [mem 0x9db3b000-0x9db3e2e6]
[    0.012402] ACPI: Reserving NHLT table memory at [mem 0x9db39000-0x9db3a820]
[    0.012402] ACPI: Reserving LPIT table memory at [mem 0x9db93000-0x9db93093]
[    0.012403] ACPI: Reserving SSDT table memory at [mem 0x9db35000-0x9db3771f]
[    0.012403] ACPI: Reserving SSDT table memory at [mem 0x9db32000-0x9db345b1]
[    0.012404] ACPI: Reserving DBGP table memory at [mem 0x9db31000-0x9db31033]
[    0.012405] ACPI: Reserving DBG2 table memory at [mem 0x9db30000-0x9db30053]
[    0.012405] ACPI: Reserving SSDT table memory at [mem 0x9db2e000-0x9db2fb66]
[    0.012406] ACPI: Reserving VFCT table memory at [mem 0x9db1f000-0x9db2d283]
[    0.012406] ACPI: Reserving BGRT table memory at [mem 0x9db1e000-0x9db1e037]
[    0.012407] ACPI: Reserving WSMT table memory at [mem 0x9db38000-0x9db38027]
[    0.012407] ACPI: Reserving APIC table memory at [mem 0x9db1d000-0x9db1d12b]
[    0.012408] ACPI: Reserving FPDT table memory at [mem 0x9db1c000-0x9db1c043]
[    0.012546] No NUMA configuration found
[    0.012546] Faking a node at [mem 0x0000000000000000-0x000000045dffffff]
[    0.012553] NODE_DATA(0) allocated [mem 0x45dfd5280-0x45dffffff]
[    0.012752] Zone ranges:
[    0.012753]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012754]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.012755]   Normal   [mem 0x0000000100000000-0x000000045dffffff]
[    0.012756]   Device   empty
[    0.012757] Movable zone start for each node
[    0.012759] Early memory node ranges
[    0.012759]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.012760]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.012761]   node   0: [mem 0x0000000000100000-0x000000009d264fff]
[    0.012762]   node   0: [mem 0x000000009ec4f000-0x000000009ec4ffff]
[    0.012762]   node   0: [mem 0x0000000100000000-0x000000045dffffff]
[    0.012764] Initmem setup node 0 [mem 0x0000000000001000-0x000000045dffffff]
[    0.012768] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.012770] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.012787] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.016010] On node 0, zone DMA32: 6634 pages in unavailable ranges
[    0.033779] On node 0, zone Normal: 5040 pages in unavailable ranges
[    0.033850] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.034140] ACPI: PM-Timer IO Port: 0x1808
[    0.034146] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.034148] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.034148] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.034149] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.034149] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.034150] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.034151] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.034151] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.034152] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.034152] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.034153] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.034153] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.034154] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.034154] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.034155] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.034155] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.034187] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.034189] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.034191] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.034194] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.034195] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.034200] e820: update [mem 0x975f5000-0x97651fff] usable ==> reserved
[    0.034208] TSC deadline timer available
[    0.034212] CPU topo: Max. logical packages:   1
[    0.034213] CPU topo: Max. logical dies:       1
[    0.034213] CPU topo: Max. dies per package:   1
[    0.034217] CPU topo: Max. threads per core:   2
[    0.034217] CPU topo: Num. cores per package:     8
[    0.034218] CPU topo: Num. threads per package:  16
[    0.034218] CPU topo: Allowing 16 present CPUs plus 0 hotplug CPUs
[    0.034231] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.034233] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.034234] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.034235] PM: hibernation: Registered nosave memory: [mem 0x975f5000-0x97651fff]
[    0.034237] PM: hibernation: Registered nosave memory: [mem 0x97d2c000-0x97d2cfff]
[    0.034238] PM: hibernation: Registered nosave memory: [mem 0x9d265000-0x9ec4efff]
[    0.034239] PM: hibernation: Registered nosave memory: [mem 0x9ec50000-0xffffffff]
[    0.034240] [mem 0xa0000000-0xfdffffff] available for PCI devices
[    0.034241] Booting paravirtualized kernel on bare hardware
[    0.034243] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.039788] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.040284] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144
[    0.040290] pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152
[    0.040292] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.040311] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=854127f4-f586-4957-8a5f-e7a82a8e89a0 zswap.enabled=0 rw rootfstype=ext4
[    0.040369] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[    0.041687] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.042340] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.042489] software IO TLB: area num 16.
[    0.053087] Fallback order for Node 0: 0
[    0.053089] Built 1 zonelists, mobility grouping on.  Total pages: 4174340
[    0.053090] Policy zone: Normal
[    0.053278] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.084573] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.092465] ftrace: allocating 55582 entries in 220 pages
[    0.092466] ftrace: allocated 220 pages with 5 groups
[    0.092536] Dynamic Preempt: full
[    0.092593] rcu: Preemptible hierarchical RCU implementation.
[    0.092593] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[    0.092594] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.092595]  Trampoline variant of Tasks RCU enabled.
[    0.092595]  Rude variant of Tasks RCU enabled.
[    0.092595]  Tracing variant of Tasks RCU enabled.
[    0.092596] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.092597] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.092605] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.092606] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.092608] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=16.
[    0.097403] NR_IRQS: 524544, nr_irqs: 2184, preallocated irqs: 16
[    0.097675] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.097927] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.097964] Console: colour dummy device 80x25
[    0.097966] printk: legacy console [tty0] enabled
[    0.098007] ACPI: Core revision 20240827
[    0.098309] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.098399] APIC: Switch to symmetric I/O mode setup
[    0.099816] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.104961] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.109341] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8bf270d8d, max_idle_ns: 881590865083 ns
[    0.109345] Calibrating delay loop (skipped), value calculated using timer frequency.. 7599.80 BogoMIPS (lpj=3799900)
[    0.109366] x86/cpu: SGX disabled or unsupported by BIOS.
[    0.109372] CPU0: Thermal monitoring enabled (TM1)
[    0.109412] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.109413] Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4
[    0.109415] process: using mwait in idle threads
[    0.109418] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.109419] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit
[    0.109420] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
[    0.109421] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.109421] RETBleed: Mitigation: Enhanced IBRS
[    0.109423] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.109424] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.109427] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.109428] SRBDS: Mitigation: Microcode
[    0.109430] GDS: Mitigation: Microcode
[    0.109431] ITS: Mitigation: Aligned branch/return thunks
[    0.109435] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.109436] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.109437] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.109437] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.109438] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.109439] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.109440] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.109441] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.109442] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.109442] x86/fpu: xstate_offset[9]:  960, xstate_sizes[9]:    8
[    0.109443] x86/fpu: Enabled xstate features 0x21f, context size is 968 bytes, using 'compacted' format.
[    0.132087] Freeing SMP alternatives memory: 52K
[    0.132090] pid_max: default: 32768 minimum: 301
[    0.134950] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[    0.135004] landlock: Up and running.
[    0.135006] Yama: becoming mindful.
[    0.135155] LSM support for eBPF active
[    0.135185] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.135199] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.135634] smpboot: CPU0: Intel(R) Core(TM) i7-10700K CPU @ 3.80GHz (family: 0x6, model: 0xa5, stepping: 0x5)
[    0.135763] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.135779] ... version:                4
[    0.135780] ... bit width:              48
[    0.135781] ... generic registers:      4
[    0.135781] ... value mask:             0000ffffffffffff
[    0.135782] ... max period:             00007fffffffffff
[    0.135783] ... fixed-purpose events:   3
[    0.135783] ... event mask:             000000070000000f
[    0.135872] signal: max sigframe size: 3632
[    0.135881] Estimated ratio of average max frequency by base frequency (times 1024): 1293
[    0.137096] rcu: Hierarchical SRCU implementation.
[    0.137097] rcu:     Max phase no-delay instances is 400.
[    0.137139] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[    0.139166] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.139261] smp: Bringing up secondary CPUs ...
[    0.139322] smpboot: x86: Booting SMP configuration:
[    0.139323] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.144570] Transient Scheduler Attacks: MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[    0.145374] smp: Brought up 1 node, 16 CPUs
[    0.145374] smpboot: Total of 16 processors activated (121596.80 BogoMIPS)
[    0.146432] Memory: 16227420K/16697360K available (19692K kernel code, 2940K rwdata, 16528K rodata, 4640K init, 5028K bss, 444916K reserved, 0K cma-reserved)
[    0.146790] devtmpfs: initialized
[    0.146790] x86/mm: Memory block size: 128MB
[    0.148002] ACPI: PM: Registering ACPI NVS region [mem 0x9db95000-0x9dd94fff] (2097152 bytes)
[    0.148002] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.148002] posixtimers hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.148002] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.148002] pinctrl core: initialized pinctrl subsystem
[    0.148345] PM: RTC time: 01:48:35, date: 2025-07-17
[    0.148703] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.148910] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.149004] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.149097] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.149102] audit: initializing netlink subsys (disabled)
[    0.149108] audit: type=2000 audit(1752716915.046:1): state=initialized audit_enabled=0 res=1
[    0.149108] thermal_sys: Registered thermal governor 'fair_share'
[    0.149108] thermal_sys: Registered thermal governor 'bang_bang'
[    0.149108] thermal_sys: Registered thermal governor 'step_wise'
[    0.149108] thermal_sys: Registered thermal governor 'user_space'
[    0.149108] thermal_sys: Registered thermal governor 'power_allocator'
[    0.149108] cpuidle: using governor ladder
[    0.149108] cpuidle: using governor menu
[    0.149108] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.149108] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.149426] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[    0.149435] PCI: Using configuration type 1 for base access
[    0.149524] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.153349] HugeTLB: allocation took 0ms with hugepage_allocation_threads=4
[    0.153349] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.153349] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.153349] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.153349] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.153351] raid6: skipped pq benchmark and selected avx2x4
[    0.153351] raid6: using avx2x2 recovery algorithm
[    0.153351] fbcon: Taking over console
[    0.153351] ACPI: Added _OSI(Module Device)
[    0.153351] ACPI: Added _OSI(Processor Device)
[    0.153351] ACPI: Added _OSI(Processor Aggregator Device)
[    0.205852] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS14.SADX], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.205860] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.205869] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS14.SADS], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.205873] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.205875] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.205878] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS14.BRDY], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.205881] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.205888] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS14.BRDS], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.205892] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.205894] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.205896] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS14.ECKY], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.205899] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.205905] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS14.ECKV], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.205908] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.205911] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.205913] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS14.GPCX], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.205916] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.205926] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.XHC.RHUB.HS14.GPC], AE_ALREADY_EXISTS (20240827/dswload2-326)
[    0.205930] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20240827/psobject-220)
[    0.205933] ACPI: Skipping parse of AML opcode: Method (0x0014)
[    0.207422] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.212671] ACPI: Dynamic OEM Table Load:
[    0.212671] ACPI: SSDT 0xFFFF8B25420F4000 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.213167] ACPI: Dynamic OEM Table Load:
[    0.213172] ACPI: SSDT 0xFFFF8B25420EB800 00070D (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.214022] ACPI: Dynamic OEM Table Load:
[    0.214026] ACPI: SSDT 0xFFFF8B2541640300 0000FC (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.214996] ACPI: Dynamic OEM Table Load:
[    0.215001] ACPI: SSDT 0xFFFF8B25420EA800 000778 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.215891] ACPI: Dynamic OEM Table Load:
[    0.215895] ACPI: SSDT 0xFFFF8B25420F4400 0003D7 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.216762] ACPI: Dynamic OEM Table Load:
[    0.216767] ACPI: SSDT 0xFFFF8B25420FD000 000D22 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.218140] ACPI: Dynamic OEM Table Load:
[    0.218144] ACPI: SSDT 0xFFFF8B25420F5800 0003CA (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.224006] ACPI: Interpreter enabled
[    0.224037] ACPI: PM: (supports S0 S3 S4 S5)
[    0.224038] ACPI: Using IOAPIC for interrupt routing
[    0.225038] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.225040] PCI: Using E820 reservations for host bridge windows
[    0.225886] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.231799] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource
[    0.231869] ACPI: \_SB_.PCI0.RP08.PXSX.DRST: New power resource
[    0.238307] ACPI: \_SB_.PCI0.XDCI.USBC: New power resource
[    0.240409] ACPI: \_SB_.PCI0.SAT0.VOL0.V0PR: New power resource
[    0.240578] ACPI: \_SB_.PCI0.SAT0.VOL1.V1PR: New power resource
[    0.240737] ACPI: \_SB_.PCI0.SAT0.VOL2.V2PR: New power resource
[    0.247008] ACPI: \_SB_.PCI0.CNVW.WRST: New power resource
[    0.251831] ACPI: \_TZ_.FN00: New power resource
[    0.251892] ACPI: \_TZ_.FN01: New power resource
[    0.251947] ACPI: \_TZ_.FN02: New power resource
[    0.252000] ACPI: \_TZ_.FN03: New power resource
[    0.252054] ACPI: \_TZ_.FN04: New power resource
[    0.252401] ACPI: \PIN_: New power resource
[    0.252717] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.252723] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.252809] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER]
[    0.252965] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR DPC]
[    0.252966] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.253994] PCI host bridge to bus 0000:00
[    0.253998] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.254000] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.254002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.254003] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.254004] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xdfffffff window]
[    0.254005] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.254007] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.254079] pci 0000:00:00.0: [8086:9b43] type 00 class 0x060000 conventional PCI endpoint
[    0.254139] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 PCIe Root Port
[    0.254147] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[    0.254149] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.254151] pci 0000:00:01.0:   bridge window [mem 0xb0300000-0xb05fffff]
[    0.254155] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
[    0.254176] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.254655] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 conventional PCI endpoint
[    0.254667] pci 0000:00:08.0: BAR 0 [mem 0xb0922000-0xb0922fff 64bit]
[    0.254766] pci 0000:00:12.0: [8086:06f9] type 00 class 0x118000 conventional PCI endpoint
[    0.254800] pci 0000:00:12.0: BAR 0 [mem 0xb0921000-0xb0921fff 64bit]
[    0.254915] pci 0000:00:14.0: [8086:06ed] type 00 class 0x0c0330 conventional PCI endpoint
[    0.254943] pci 0000:00:14.0: BAR 0 [mem 0xb0900000-0xb090ffff 64bit]
[    0.254972] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.255514] pci 0000:00:14.2: [8086:06ef] type 00 class 0x050000 conventional PCI endpoint
[    0.255548] pci 0000:00:14.2: BAR 0 [mem 0xb091a000-0xb091bfff 64bit]
[    0.255551] pci 0000:00:14.2: BAR 2 [mem 0xb0920000-0xb0920fff 64bit]
[    0.255745] pci 0000:00:14.3: [8086:06f0] type 00 class 0x028000 PCIe Root Complex Integrated Endpoint
[    0.255850] pci 0000:00:14.3: BAR 0 [mem 0xb0914000-0xb0917fff 64bit]
[    0.255990] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.256219] pci 0000:00:16.0: [8086:06e0] type 00 class 0x078000 conventional PCI endpoint
[    0.256260] pci 0000:00:16.0: BAR 0 [mem 0xb091f000-0xb091ffff 64bit]
[    0.256306] pci 0000:00:16.0: PME# supported from D3hot
[    0.256781] pci 0000:00:17.0: [8086:06d2] type 00 class 0x010601 conventional PCI endpoint
[    0.256809] pci 0000:00:17.0: BAR 0 [mem 0xb0918000-0xb0919fff]
[    0.256811] pci 0000:00:17.0: BAR 1 [mem 0xb091e000-0xb091e0ff]
[    0.256813] pci 0000:00:17.0: BAR 2 [io  0x5050-0x5057]
[    0.256814] pci 0000:00:17.0: BAR 3 [io  0x5040-0x5043]
[    0.256816] pci 0000:00:17.0: BAR 4 [io  0x5020-0x503f]
[    0.256818] pci 0000:00:17.0: BAR 5 [mem 0xb091d000-0xb091d7ff]
[    0.256846] pci 0000:00:17.0: PME# supported from D3hot
[    0.257187] pci 0000:00:1c.0: [8086:06b8] type 01 class 0x060400 PCIe Root Port
[    0.257206] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.257263] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.257869] pci 0000:00:1c.4: [8086:06bc] type 01 class 0x060400 PCIe Root Port
[    0.257886] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.257889] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.257892] pci 0000:00:1c.4:   bridge window [mem 0xb0800000-0xb08fffff]
[    0.257950] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.257973] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
[    0.258561] pci 0000:00:1c.7: [8086:06bf] type 01 class 0x060400 PCIe Root Port
[    0.258578] pci 0000:00:1c.7: PCI bridge to [bus 06]
[    0.258582] pci 0000:00:1c.7:   bridge window [mem 0xb0700000-0xb07fffff]
[    0.258640] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.258663] pci 0000:00:1c.7: PTM enabled (root), 4ns granularity
[    0.259244] pci 0000:00:1d.0: [8086:06b0] type 01 class 0x060400 PCIe Root Port
[    0.259261] pci 0000:00:1d.0: PCI bridge to [bus 07]
[    0.259265] pci 0000:00:1d.0:   bridge window [mem 0xb0600000-0xb06fffff]
[    0.259323] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.259346] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.259961] pci 0000:00:1f.0: [8086:0685] type 00 class 0x060100 conventional PCI endpoint
[    0.260261] pci 0000:00:1f.3: [8086:06c8] type 00 class 0x040300 conventional PCI endpoint
[    0.260330] pci 0000:00:1f.3: BAR 0 [mem 0xb0910000-0xb0913fff 64bit]
[    0.260341] pci 0000:00:1f.3: BAR 4 [mem 0xb0200000-0xb02fffff 64bit]
[    0.260408] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.261465] pci 0000:00:1f.4: [8086:06a3] type 00 class 0x0c0500 conventional PCI endpoint
[    0.261505] pci 0000:00:1f.4: BAR 0 [mem 0xb091c000-0xb091c0ff 64bit]
[    0.261517] pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
[    0.261754] pci 0000:00:1f.5: [8086:06a4] type 00 class 0x0c8000 conventional PCI endpoint
[    0.261791] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
[    0.261876] pci 0000:01:00.0: [1002:1478] type 01 class 0x060400 PCIe Switch Upstream Port
[    0.261892] pci 0000:01:00.0: BAR 0 [mem 0xb0500000-0xb0503fff]
[    0.261895] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[    0.261899] pci 0000:01:00.0:   bridge window [io  0x4000-0x4fff]
[    0.261901] pci 0000:01:00.0:   bridge window [mem 0xb0300000-0xb04fffff]
[    0.261908] pci 0000:01:00.0:   bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
[    0.261969] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.262019] pci 0000:01:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.262078] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[    0.262115] pci 0000:02:00.0: [1002:1479] type 01 class 0x060400 PCIe Switch Downstream Port
[    0.262131] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.262135] pci 0000:02:00.0:   bridge window [io  0x4000-0x4fff]
[    0.262137] pci 0000:02:00.0:   bridge window [mem 0xb0300000-0xb04fffff]
[    0.262144] pci 0000:02:00.0:   bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
[    0.262204] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.262300] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[    0.262338] pci 0000:03:00.0: [1002:747e] type 00 class 0x030000 PCIe Legacy Endpoint
[    0.262364] pci 0000:03:00.0: BAR 0 [mem 0xa0000000-0xafffffff 64bit pref]
[    0.262366] pci 0000:03:00.0: BAR 2 [mem 0xb0000000-0xb01fffff 64bit pref]
[    0.262368] pci 0000:03:00.0: BAR 4 [io  0x4000-0x40ff]
[    0.262369] pci 0000:03:00.0: BAR 5 [mem 0xb0300000-0xb03fffff]
[    0.262371] pci 0000:03:00.0: ROM [mem 0xb0400000-0xb041ffff pref]
[    0.262435] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.262491] pci 0000:03:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.262550] pci 0000:03:00.1: [1002:ab30] type 00 class 0x040300 PCIe Legacy Endpoint
[    0.262574] pci 0000:03:00.1: BAR 0 [mem 0xb0420000-0xb0423fff]
[    0.262623] pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.262694] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.262781] acpiphp: Slot [1] registered
[    0.262790] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.262869] pci 0000:05:00.0: [10ec:8125] type 00 class 0x020000 PCIe Endpoint
[    0.262915] pci 0000:05:00.0: BAR 0 [io  0x3000-0x30ff]
[    0.262920] pci 0000:05:00.0: BAR 2 [mem 0xb0800000-0xb080ffff 64bit]
[    0.262923] pci 0000:05:00.0: BAR 4 [mem 0xb0810000-0xb0813fff 64bit]
[    0.263025] pci 0000:05:00.0: supports D1 D2
[    0.263026] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.263203] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.263304] pci 0000:06:00.0: [8086:095a] type 00 class 0x028000 PCIe Endpoint
[    0.263382] pci 0000:06:00.0: BAR 0 [mem 0xb0700000-0xb0701fff 64bit]
[    0.263521] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.263774] pci 0000:00:1c.7: PCI bridge to [bus 06]
[    0.263850] pci 0000:07:00.0: [10ec:5762] type 00 class 0x010802 PCIe Endpoint
[    0.263894] pci 0000:07:00.0: BAR 0 [mem 0xb0600000-0xb0603fff 64bit]
[    0.263899] pci 0000:07:00.0: BAR 5 [mem 0xb0604000-0xb0605fff]
[    0.264106] pci 0000:00:1d.0: PCI bridge to [bus 07]
[    0.265910] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.265986] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.266060] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.266133] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.266206] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.266278] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.266352] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.266426] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.270352] iommu: Default domain type: Translated
[    0.270352] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.270449] SCSI subsystem initialized
[    0.270454] libata version 3.00 loaded.
[    0.270454] ACPI: bus type USB registered
[    0.270454] usbcore: registered new interface driver usbfs
[    0.270454] usbcore: registered new interface driver hub
[    0.270454] usbcore: registered new device driver usb
[    0.270454] EDAC MC: Ver: 3.0.0
[    0.270532] efivars: Registered efivars operations
[    0.270532] NetLabel: Initializing
[    0.270532] NetLabel:  domain hash size = 128
[    0.270532] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.270532] NetLabel:  unlabeled traffic allowed by default
[    0.270532] mctp: management component transport protocol core
[    0.270532] NET: Registered PF_MCTP protocol family
[    0.270532] PCI: Using ACPI for IRQ routing
[    0.312249] PCI: pci_cache_line_size set to 64 bytes
[    0.312424] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.312426] e820: reserve RAM buffer [mem 0x975f5000-0x97ffffff]
[    0.312427] e820: reserve RAM buffer [mem 0x97d2c000-0x97ffffff]
[    0.312428] e820: reserve RAM buffer [mem 0x9d265000-0x9fffffff]
[    0.312429] e820: reserve RAM buffer [mem 0x9ec50000-0x9fffffff]
[    0.312430] e820: reserve RAM buffer [mem 0x45e000000-0x45fffffff]
[    0.312461] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[    0.312461] pci 0000:03:00.0: vgaarb: bridge control possible
[    0.312461] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.312461] vgaarb: loaded
[    0.313379] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.313384] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.315385] clocksource: Switched to clocksource tsc-early
[    0.315904] VFS: Disk quotas dquot_6.6.0
[    0.315912] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.315937] pnp: PnP ACPI init
[    0.316148] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.316150] system 00:00: [io  0x0a10-0x0a1f] has been reserved
[    0.316152] system 00:00: [io  0x0a20-0x0a2f] has been reserved
[    0.316573] pnp 00:01: [dma 0 disabled]
[    0.316699] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.316701] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.316889] system 00:03: [io  0x1800-0x18fe] could not be reserved
[    0.316891] system 00:03: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.316893] system 00:03: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    0.316894] system 00:03: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.316895] system 00:03: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.316896] system 00:03: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.316898] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[    0.317140] system 00:04: [io  0x2000-0x20fe] has been reserved
[    0.317350] system 00:05: [mem 0xfd6e0000-0xfd6effff] has been reserved
[    0.317352] system 00:05: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[    0.317353] system 00:05: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[    0.317355] system 00:05: [mem 0xfd6a0000-0xfd6affff] has been reserved
[    0.317826] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.317828] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.317829] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.317831] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.317832] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.317833] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.317834] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.317835] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.318121] system 00:07: [mem 0xfe038000-0xfe038fff] has been reserved
[    0.318490] pnp: PnP ACPI: found 8 devices
[    0.323812] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.323850] NET: Registered PF_INET protocol family
[    0.323958] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.334449] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.334474] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.334508] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.334685] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.334869] TCP: Hash tables configured (established 131072 bind 65536)
[    0.334922] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.334971] UDP hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.335032] UDP-Lite hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.335099] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.335103] NET: Registered PF_XDP protocol family
[    0.335111] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.335118] pci 0000:02:00.0:   bridge window [io  0x4000-0x4fff]
[    0.335122] pci 0000:02:00.0:   bridge window [mem 0xb0300000-0xb04fffff]
[    0.335124] pci 0000:02:00.0:   bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
[    0.335128] pci 0000:01:00.0: PCI bridge to [bus 02-03]
[    0.335130] pci 0000:01:00.0:   bridge window [io  0x4000-0x4fff]
[    0.335132] pci 0000:01:00.0:   bridge window [mem 0xb0300000-0xb04fffff]
[    0.335135] pci 0000:01:00.0:   bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
[    0.335138] pci 0000:00:01.0: PCI bridge to [bus 01-03]
[    0.335139] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.335141] pci 0000:00:01.0:   bridge window [mem 0xb0300000-0xb05fffff]
[    0.335143] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
[    0.335145] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.335159] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.335161] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.335164] pci 0000:00:1c.4:   bridge window [mem 0xb0800000-0xb08fffff]
[    0.335168] pci 0000:00:1c.7: PCI bridge to [bus 06]
[    0.335171] pci 0000:00:1c.7:   bridge window [mem 0xb0700000-0xb07fffff]
[    0.335176] pci 0000:00:1d.0: PCI bridge to [bus 07]
[    0.335178] pci 0000:00:1d.0:   bridge window [mem 0xb0600000-0xb06fffff]
[    0.335183] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.335185] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.335186] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.335187] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window]
[    0.335188] pci_bus 0000:00: resource 8 [mem 0xa0000000-0xdfffffff window]
[    0.335189] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
[    0.335189] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.335190] pci_bus 0000:01: resource 1 [mem 0xb0300000-0xb05fffff]
[    0.335191] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref]
[    0.335192] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.335193] pci_bus 0000:02: resource 1 [mem 0xb0300000-0xb04fffff]
[    0.335194] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref]
[    0.335195] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
[    0.335196] pci_bus 0000:03: resource 1 [mem 0xb0300000-0xb04fffff]
[    0.335197] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref]
[    0.335198] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.335199] pci_bus 0000:05: resource 1 [mem 0xb0800000-0xb08fffff]
[    0.335200] pci_bus 0000:06: resource 1 [mem 0xb0700000-0xb07fffff]
[    0.335201] pci_bus 0000:07: resource 1 [mem 0xb0600000-0xb06fffff]
[    0.335590] pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
[    0.335633] PCI: CLS 64 bytes, default 64
[    0.335666] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.335667] software IO TLB: mapped [mem 0x000000008ce9e000-0x0000000090e9e000] (64MB)
[    0.335698] Trying to unpack rootfs image as initramfs...
[    0.335722] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.353031] Initialise system trusted keyrings
[    0.353038] Key type blacklist registered
[    0.353064] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.353220] fuse: init (API version 7.43)
[    0.353281] integrity: Platform Keyring initialized
[    0.353283] integrity: Machine keyring initialized
[    0.361878] xor: automatically using best checksumming function   avx
[    0.361880] Key type asymmetric registered
[    0.361881] Asymmetric key parser 'x509' registered
[    0.361916] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.361950] io scheduler mq-deadline registered
[    0.361951] io scheduler kyber registered
[    0.361959] io scheduler bfq registered
[    0.362650] ledtrig-cpu: registered to indicate activity on CPUs
[    0.363810] Monitor-Mwait will be used to enter C-1 state
[    0.363817] Monitor-Mwait will be used to enter C-2 state
[    0.364247] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.364267] ACPI: button: Sleep Button [SLPB]
[    0.364287] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.364299] ACPI: button: Power Button [PWRB]
[    0.364317] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.367522] ACPI: button: Power Button [PWRF]
[    0.368769] thermal LNXTHERM:00: registered as thermal_zone0
[    0.368771] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[    0.368941] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.369363] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.371686] Non-volatile memory driver v1.3
[    0.371687] Linux agpgart interface v0.103
[    0.371771] ACPI: bus type drm_connector registered
[    0.373430] ahci 0000:00:17.0: version 3.0
[    0.375484] Freeing initrd memory: 26684K
[    0.383653] ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[    0.383656] ahci 0000:00:17.0: 4/4 ports implemented (port mask 0xf)
[    0.383657] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst
[    0.390942] scsi host0: ahci
[    0.391185] scsi host1: ahci
[    0.391252] scsi host2: ahci
[    0.391315] scsi host3: ahci
[    0.391340] ata1: SATA max UDMA/133 abar m2048@0xb091d000 port 0xb091d100 irq 126 lpm-pol 3
[    0.391342] ata2: SATA max UDMA/133 abar m2048@0xb091d000 port 0xb091d180 irq 126 lpm-pol 3
[    0.391344] ata3: SATA max UDMA/133 abar m2048@0xb091d000 port 0xb091d200 irq 126 lpm-pol 3
[    0.391345] ata4: SATA max UDMA/133 abar m2048@0xb091d000 port 0xb091d280 irq 126 lpm-pol 3
[    0.391556] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.391561] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.392632] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    0.392807] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.392809] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.392811] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.392837] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.15
[    0.392839] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.392840] usb usb1: Product: xHCI Host Controller
[    0.392841] usb usb1: Manufacturer: Linux 6.15.6-arch1-1 xhci-hcd
[    0.392841] usb usb1: SerialNumber: 0000:00:14.0
[    0.392976] hub 1-0:1.0: USB hub found
[    0.392991] hub 1-0:1.0: 16 ports detected
[    0.395051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.15
[    0.395053] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.395054] usb usb2: Product: xHCI Host Controller
[    0.395055] usb usb2: Manufacturer: Linux 6.15.6-arch1-1 xhci-hcd
[    0.395056] usb usb2: SerialNumber: 0000:00:14.0
[    0.395142] hub 2-0:1.0: USB hub found
[    0.395154] hub 2-0:1.0: 10 ports detected
[    0.396286] usb: port power management may be unreliable
[    0.396698] usbcore: registered new interface driver usbserial_generic
[    0.396702] usbserial: USB Serial support registered for generic
[    0.396732] i8042: PNP: No PS/2 controller found.
[    0.396867] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.397753] rtc_cmos rtc_cmos: registered as rtc0
[    0.397909] rtc_cmos rtc_cmos: setting system clock to 2025-07-17T01:48:35 UTC (1752716915)
[    0.397933] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.398447] intel_pstate: Intel P-state driver initializing
[    0.399263] intel_pstate: HWP enabled
[    0.399534] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
[    0.399535] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[    0.401857] Console: switching to colour frame buffer device 240x67
[    0.404258] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    0.404346] hid: raw HID events driver (C) Jiri Kosina
[    0.404367] usbcore: registered new interface driver usbhid
[    0.404369] usbhid: USB HID core driver
[    0.404431] drop_monitor: Initializing network drop monitor service
[    0.404525] NET: Registered PF_INET6 protocol family
[    0.408292] Segment Routing with IPv6
[    0.408293] RPL Segment Routing with IPv6
[    0.408299] In-situ OAM (IOAM) with IPv6
[    0.408311] NET: Registered PF_PACKET protocol family
[    0.409156] microcode: Current revision: 0x00000100
[    0.409157] microcode: Updated early from: 0x000000ca
[    0.409529] IPI shorthand broadcast: enabled
[    0.410755] sched_clock: Marking stable (406008334, 4500400)->(415528951, -5020217)
[    0.410908] registered taskstats version 1
[    0.411357] Loading compiled-in X.509 certificates
[    0.414608] Loaded X.509 cert 'Build time autogenerated kernel key: c92675c24f6b4bd17516ae0e98b61f2812601d04'
[    0.415802] Demotion targets for Node 0: null
[    0.415876] Key type .fscrypt registered
[    0.415877] Key type fscrypt-provisioning registered
[    0.416240] Btrfs loaded, zoned=yes, fsverity=yes
[    0.416256] Key type big_key registered
[    0.416696] PM:   Magic number: 1:175:812
[    0.417507] RAS: Correctable Errors collector initialized.
[    0.419984] clk: Disabling unused clocks
[    0.419986] PM: genpd: Disabling unused power domains
[    0.629623] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    0.699905] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.699949] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.700016] ata1: SATA link down (SStatus 4 SControl 300)
[    0.700065] ata2: SATA link down (SStatus 4 SControl 300)
[    0.700766] ata3.00: supports DRM functions and may not be fully accessible
[    0.700775] ata3.00: ATA-10: CT4000MX500SSD1, M3CR045, max UDMA/133
[    0.700907] ata3.00: 7814037168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    0.702064] ata3.00: Features: Trust Dev-Sleep
[    0.702293] ata3.00: supports DRM functions and may not be fully accessible
[    0.703127] ata3.00: configured for UDMA/133
[    0.703141] ahci 0000:00:17.0: port does not support device sleep
[    0.703463] scsi 2:0:0:0: Direct-Access     ATA      CT4000MX500SSD1  045  PQ: 0 ANSI: 5
[    0.703674] sd 2:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    0.703676] sd 2:0:0:0: [sda] 4096-byte physical blocks
[    0.703680] sd 2:0:0:0: [sda] Write Protect is off
[    0.703681] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.703685] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.703696] sd 2:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    0.728109] ata4.00: ATA-10: ST3000DM007-1WY10G, 0001, max UDMA/133
[    0.737219] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.758592] usb 1-3: New USB device found, idVendor=17ef, idProduct=60d5, bcdDevice= 2.00
[    0.758597] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    0.758599] usb 1-3: Product: Lenovo Legion K500 RGB Mechanical Gaming Keyboard
[    0.758600] usb 1-3: Manufacturer: Lenovo
[    0.762407] input: Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:17EF:60D5.0001/input/input3
[    0.796729] ata4.00: configured for UDMA/133
[    0.806040] scsi 3:0:0:0: Direct-Access     ATA      ST3000DM007-1WY1 0001 PQ: 0 ANSI: 5
[    0.806689] sd 3:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[    0.806699] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    0.806718] sd 3:0:0:0: [sdb] Write Protect is off
[    0.806724] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.806748] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.806791] sd 3:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    0.813360] hid-generic 0003:17EF:60D5.0001: input,hidraw0: USB HID v1.10 Keyboard [Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard] on usb-0000:00:14.0-3/input0
[    0.817381] input: Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:17EF:60D5.0002/input/input4
[    0.817639] input: Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:17EF:60D5.0002/input/input5
[    0.829461]  sda: sda1
[    0.846357] sd 2:0:0:0: [sda] supports TCG Opal
[    0.846367] sd 2:0:0:0: [sda] Attached SCSI disk
[    0.865684] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[    0.868975] hid-generic 0003:17EF:60D5.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard] on usb-0000:00:14.0-3/input1
[    0.871081] input: Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:17EF:60D5.0003/input/input6
[    0.877331] usb 2-4: New USB device found, idVendor=0424, idProduct=5744, bcdDevice= 2.21
[    0.877343] usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    0.877350] usb 2-4: Product: USB5744
[    0.877355] usb 2-4: Manufacturer: Microchip Tech
[    0.878818] hub 2-4:1.0: USB hub found
[    0.878872] hub 2-4:1.0: 4 ports detected
[    0.888524]  sdb: sdb1 sdb2
[    0.888691] sd 3:0:0:0: [sdb] Attached SCSI disk
[    0.889454] Freeing unused decrypted memory: 2028K
[    0.889973] Freeing unused kernel image (initmem) memory: 4640K
[    0.889989] Write protecting the kernel read-only data: 38912k
[    0.890508] Freeing unused kernel image (text/rodata gap) memory: 784K
[    0.890891] Freeing unused kernel image (rodata/data gap) memory: 1904K
[    0.898313] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.898316] rodata_test: all tests were successful
[    0.898319] Run /init as init process
[    0.898320]   with arguments:
[    0.898320]     /init
[    0.898321]   with environment:
[    0.898321]     HOME=/
[    0.898322]     TERM=linux
[    0.922589] hid-generic 0003:17EF:60D5.0003: input,hidraw2: USB HID v1.11 Keyboard [Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard] on usb-0000:00:14.0-3/input2
[    0.923869] hid-generic 0003:17EF:60D5.0004: hiddev96,hidraw3: USB HID v1.11 Device [Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard] on usb-0000:00:14.0-3/input3
[    0.993580] Key type psk registered
[    0.993823] cryptd: max_cpu_qlen set to 1000
[    1.002269] nvme 0000:07:00.0: platform quirk: setting simple suspend
[    1.002320] nvme nvme0: pci function 0000:07:00.0
[    1.035628] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    1.074431] nvme nvme0: allocated 64 MiB host memory buffer (16 segments).
[    1.079661] nvme nvme0: 7/0/0 default/read/poll queues
[    1.085590] nvme nvme0: Ignoring bogus Namespace Identifiers
[    1.086845]  nvme0n1: p1 p2 p3
[    1.147694] usb 1-4: device descriptor read/64, error -71
[    1.349602] tsc: Refined TSC clocksource calibration: 3791.998 MHz
[    1.349622] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d51a1f9672, max_idle_ns: 881590864124 ns
[    1.349771] clocksource: Switched to clocksource tsc
[    1.365710] usb 1-4: device descriptor read/64, error -71
[    1.581600] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[    1.694720] usb 1-4: device descriptor read/64, error -71
[    1.909689] usb 1-4: device descriptor read/64, error -71
[    2.013721] usb usb1-port4: attempt power cycle
[    2.076835] usb 2-4.1: new SuperSpeed USB device number 3 using xhci_hcd
[    2.220789] usb 2-4.1: New USB device found, idVendor=28de, idProduct=2400, bcdDevice= 0.09
[    2.220802] usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.220809] usb 2-4.1: Product: 3D Camera
[    2.220813] usb 2-4.1: Manufacturer: Etron Technology, Inc.
[    2.220817] usb 2-4.1: SerialNumber: 00000001
[    2.424587] usb 1-4: new full-speed USB device number 5 using xhci_hcd
[    2.424789] usb 1-4: Device not responding to setup address.
[    2.629779] usb 1-4: Device not responding to setup address.
[    2.837612] usb 1-4: device not accepting address 5, error -71
[    2.837818] usb 1-4: WARN: invalid context state for evaluate context command.
[    2.949587] usb 1-4: new full-speed USB device number 6 using xhci_hcd
[    2.949789] usb 1-4: Device not responding to setup address.
[    3.157799] usb 1-4: Device not responding to setup address.
[    3.365611] usb 1-4: device not accepting address 6, error -71
[    3.365743] usb 1-4: WARN: invalid context state for evaluate context command.
[    3.365845] usb usb1-port4: unable to enumerate USB device
[    3.477587] usb 1-6: new full-speed USB device number 7 using xhci_hcd
[    3.603455] usb 1-6: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
[    3.603468] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.603474] usb 1-6: Product: USB Receiver
[    3.603479] usb 1-6: Manufacturer: Logitech
[    3.606586] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C52B.0005/input/input7
[    3.698021] hid-generic 0003:046D:C52B.0005: input,hidraw4: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-6/input0
[    3.701609] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C52B.0006/input/input8
[    3.701885] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C52B.0006/input/input9
[    3.752878] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C52B.0006/input/input10
[    3.753533] hid-generic 0003:046D:C52B.0006: input,hiddev97,hidraw5: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6/input1
[    3.756280] hid-generic 0003:046D:C52B.0007: hiddev98,hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2
[    3.868600] usb 1-11: new high-speed USB device number 8 using xhci_hcd
[    3.993205] usb 1-11: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
[    3.993218] usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.993225] usb 1-11: Product: USB2.0 Hub
[    3.994724] hub 1-11:1.0: USB hub found
[    3.995057] hub 1-11:1.0: 4 ports detected
[    4.110609] usb 1-13: new full-speed USB device number 9 using xhci_hcd
[    4.234736] usb 1-13: New USB device found, idVendor=1462, idProduct=7c76, bcdDevice= 0.01
[    4.234749] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.234755] usb 1-13: Product: MYSTIC LIGHT
[    4.234760] usb 1-13: Manufacturer: MSI
[    4.234764] usb 1-13: SerialNumber: A02020021204
[    4.238135] input: MSI MYSTIC LIGHT  as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/0003:1462:7C76.0008/input/input12
[    4.238423] hid-generic 0003:1462:7C76.0008: input,hiddev99,hidraw7: USB HID v1.10 Device [MSI MYSTIC LIGHT ] on usb-0000:00:14.0-13/input0
[    4.295610] usb 1-11.1: new full-speed USB device number 10 using xhci_hcd
[    4.370532] usb 1-11.1: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.03
[    4.370546] usb 1-11.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.480587] usb 1-14: new full-speed USB device number 11 using xhci_hcd
[    4.605616] usb 1-14: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[    4.605630] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.743481] logitech-djreceiver 0003:046D:C52B.0007: hiddev97,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2
[    4.850069] input: Logitech Wireless Device PID:407b Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0007/0003:046D:407B.0009/input/input13
[    4.898698] input: Logitech Wireless Device PID:407b Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0007/0003:046D:407B.0009/input/input14
[    4.898886] hid-generic 0003:046D:407B.0009: input,hidraw5: USB HID v1.11 Keyboard [Logitech Wireless Device PID:407b] on usb-0000:00:14.0-6/input2:1
[    4.984782] input: Logitech MX Vertical as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0007/0003:046D:407B.0009/input/input18
[    5.035020] logitech-hidpp-device 0003:046D:407B.0009: input,hidraw5: USB HID v1.11 Keyboard [Logitech MX Vertical] on usb-0000:00:14.0-6/input2:1
[    5.077396] device-mapper: uevent: version 1.0.3
[    5.077436] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[    5.177673] Key type encrypted registered
[    5.327912] EXT4-fs (nvme0n1p2): Supports (experimental) DIO atomic writes awu_min: 4096, awu_max: 4096
[    5.370707] EXT4-fs (nvme0n1p2): mounted filesystem ab753519-8438-40ec-838d-e530f768d381 r/w with ordered data mode. Quota mode: none.
[    5.454783] systemd[1]: systemd 257.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[    5.454786] systemd[1]: Detected architecture x86-64.
[    5.457414] systemd[1]: Hostname set to <jazztarche-revengance>.
[    5.541854] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[    5.645714] systemd-fstab-generator[365]: Mount point  is not a valid path, ignoring.
[    5.646877] systemd-fstab-generator[365]: Mount point  is not a valid path, ignoring.
[    5.647043] systemd-fstab-generator[365]: Mount point  is not a valid path, ignoring.
[    5.661801] zram: Added device: zram0
[    5.751091] systemd[1]: Queued start job for default target Graphical Interface.
[    5.766297] systemd[1]: Created slice Virtual Machine and Container Slice.
[    5.766830] systemd[1]: Created slice CUPS Slice.
[    5.767048] systemd[1]: Created slice Slice /system/dirmngr.
[    5.767258] systemd[1]: Created slice Slice /system/getty.
[    5.767472] systemd[1]: Created slice Slice /system/gpg-agent.
[    5.767721] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[    5.767936] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[    5.768145] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[    5.768361] systemd[1]: Created slice Slice /system/keyboxd.
[    5.768612] systemd[1]: Created slice Slice /system/modprobe.
[    5.768829] systemd[1]: Created slice Encrypted Volume Units Service Slice.
[    5.769040] systemd[1]: Created slice Slice /system/systemd-fsck.
[    5.769255] systemd[1]: Created slice Slice /system/systemd-zram-setup.
[    5.769393] systemd[1]: Created slice User and Session Slice.
[    5.769443] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.769686] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.769763] systemd[1]: Expecting device /dev/disk/by-uuid/0463-1624...
[    5.769816] systemd[1]: Expecting device /dev/disk/by-uuid/2A522A035229D3FB...
[    5.769869] systemd[1]: Expecting device /dev/disk/by-uuid/3f40b608-dcfe-40b9-84e9-73a0ef50bc55...
[    5.769924] systemd[1]: Expecting device /dev/disk/by-uuid/3f727003-7952-4e66-8161-570faba610cd...
[    5.769978] systemd[1]: Expecting device /dev/disk/by-uuid/822e38b0-8253-43b7-8c68-a2bfbc33b25d...
[    5.770670] systemd[1]: Expecting device /dev/disk/by-uuid/a38eadba-584c-40b6-9272-c69c71024bcf...
[    5.770885] systemd[1]: Expecting device /dev/zram0...
[    5.771080] systemd[1]: Reached target Login Prompts.
[    5.771272] systemd[1]: Reached target Local Integrity Protected Volumes.
[    5.771466] systemd[1]: Reached target Remote File Systems.
[    5.771659] systemd[1]: Reached target Slice Units.
[    5.771852] systemd[1]: Reached target System Time Set.
[    5.772044] systemd[1]: Reached target Local Verity Protected Volumes.
[    5.772266] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.772497] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.775075] systemd[1]: Listening on Process Core Dump Socket.
[    5.775744] systemd[1]: Listening on Credential Encryption/Decryption.
[    5.775987] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.776214] systemd[1]: Listening on Journal Sockets.
[    5.776410] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    5.776420] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    5.776462] systemd[1]: Listening on udev Control Socket.
[    5.776681] systemd[1]: Listening on udev Kernel Socket.
[    5.777536] systemd[1]: Mounting Huge Pages File System...
[    5.778113] systemd[1]: Mounting POSIX Message Queue File System...
[    5.778730] systemd[1]: Mounting Kernel Debug File System...
[    5.779315] systemd[1]: Mounting Kernel Trace File System...
[    5.780106] systemd[1]: Starting Create List of Static Device Nodes...
[    5.780796] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    5.781442] systemd[1]: Starting Load Kernel Module configfs...
[    5.782087] systemd[1]: Starting Load Kernel Module dm_mod...
[    5.782738] systemd[1]: Starting Load Kernel Module drm...
[    5.783384] systemd[1]: Starting Load Kernel Module fuse...
[    5.784081] systemd[1]: Starting Load Kernel Module loop...
[    5.784692] systemd[1]: Starting Mullvad early boot network blocker...
[    5.784949] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[    5.784980] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[    5.785849] systemd[1]: Starting Journal Service...
[    5.786897] systemd[1]: Starting Load Kernel Modules...
[    5.787103] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    5.787556] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.787764] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    5.788186] systemd[1]: Starting Load udev Rules from Credentials...
[    5.788856] systemd[1]: Starting Coldplug All udev Devices...
[    5.789821] systemd[1]: Starting Virtual Console Setup...
[    5.790977] loop: module loaded
[    5.791960] systemd[1]: Mounted Huge Pages File System.
[    5.792402] systemd[1]: Mounted POSIX Message Queue File System.
[    5.792690] systemd[1]: Mounted Kernel Debug File System.
[    5.792921] systemd[1]: Mounted Kernel Trace File System.
[    5.793242] systemd[1]: Finished Create List of Static Device Nodes.
[    5.793564] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    5.793664] systemd[1]: Finished Load Kernel Module configfs.
[    5.793978] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    5.794081] systemd[1]: Finished Load Kernel Module dm_mod.
[    5.794394] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    5.794484] systemd[1]: Finished Load Kernel Module drm.
[    5.794792] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    5.794889] systemd[1]: Finished Load Kernel Module fuse.
[    5.795192] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    5.795288] systemd[1]: Finished Load Kernel Module loop.
[    5.796021] systemd[1]: Mounting FUSE Control File System...
[    5.796534] systemd[1]: Mounting Kernel Configuration File System...
[    5.796708] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[    5.797199] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[    5.798099] systemd[1]: Finished Load udev Rules from Credentials.
[    5.798992] i2c_dev: i2c /dev entries driver
[    5.799149] systemd[1]: Mounted FUSE Control File System.
[    5.800693] systemd[1]: Mounted Kernel Configuration File System.
[    5.800721] systemd-journald[394]: Collecting audit messages is disabled.
[    5.804669] EXT4-fs (nvme0n1p2): re-mounted ab753519-8438-40ec-838d-e530f768d381.
[    5.805158] systemd[1]: Finished Remount Root and Kernel File Systems.
[    5.805693] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
[    5.806504] systemd[1]: Starting Load/Save OS Random Seed...
[    5.806760] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    5.811789] systemd[1]: Finished Virtual Console Setup.
[    5.814079] systemd[1]: Finished Load/Save OS Random Seed.
[    5.826388] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
[    5.827217] systemd[1]: Create System Users was skipped because no trigger condition checks were met.
[    5.827836] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.829258] systemd[1]: Started Journal Service.
[    5.835811] nvidia: loading out-of-tree module taints kernel.
[    5.835818] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    5.846565] systemd-journald[394]: Received client request to flush runtime journal.
[    5.895583] nvidia-nvlink: Nvlink Core is being initialized, major device number 237
[    5.895587] NVRM: No NVIDIA GPU found.
[    5.898166] nvidia-nvlink: Unregistered Nvlink Core, major device number 237
[    5.967037] zram0: detected capacity change from 0 to 8388608
[    5.985276] Asymmetric key parser 'pkcs8' registered
[    5.999911] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002)
[    6.001452] intel_pmc_core INT33A1:00:  initialized
[    6.007153] Adding 4194300k swap on /dev/zram0.  Priority:100 extents:1 across:4194300k SSDsc
[    6.009238] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    6.064871] input: PC Speaker as /devices/platform/pcspkr/input/input19
[    6.069986] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.072533] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    6.072807] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.072919] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    6.073640] spi-nor spi0.0: supply vcc not found, using dummy regulator
[    6.073672] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    6.073675] cfg80211: failed to load regulatory.db
[    6.076822] i2c i2c-0: Successfully instantiated SPD at 0x51
[    6.077554] Creating 1 MTD partitions on "0000:00:1f.5":
[    6.077556] 0x000000000000-0x000002000000 : "BIOS"
[    6.077792] i2c i2c-0: Successfully instantiated SPD at 0x53
[    6.089321] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[    6.089332] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.089333] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.089334] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    6.117028] iTCO_vendor_support: vendor-support=0
[    6.117614] Intel(R) Wireless WiFi driver for Linux
[    6.118128] r8169 0000:05:00.0: enabling device (0000 -> 0003)
[    6.118258] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    6.123228] iwlwifi 0000:00:14.3: Detected crf-id 0x3617, cnv-id 0x20000302 wfpm id 0x80000000
[    6.123246] iwlwifi 0000:00:14.3: PCI dev 06f0/0074, rev=0x351, rfid=0x10a100
[    6.123249] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz
[    6.126850] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only
[    6.132787] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[    6.132914] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only
[    6.133424] iwlwifi 0000:00:14.3: loaded firmware version 77.864baa2e.0 QuZ-a0-hr-b0-77.ucode op_mode iwlmvm
[    6.136586] iwlwifi 0000:06:00.0: enabling device (0000 -> 0002)
[    6.138816] iwlwifi 0000:06:00.0: Detected crf-id 0x0, cnv-id 0x0 wfpm id 0x0
[    6.138826] iwlwifi 0000:06:00.0: PCI dev 095a/5010, rev=0x210, rfid=0xd55555d5
[    6.138831] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7265
[    6.140060] pps_core: LinuxPPS API ver. 1 registered
[    6.140063] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    6.145622] iwlwifi 0000:06:00.0: Found debug destination: EXTERNAL_DRAM
[    6.145628] iwlwifi 0000:06:00.0: Found debug configuration: 0
[    6.145983] iwlwifi 0000:06:00.0: loaded firmware version 29.9ef079ed.0 7265D-29.ucode op_mode iwlmvm
[    6.148991] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    6.149286] Bluetooth: Core ver 2.22
[    6.149739] NET: Registered PF_BLUETOOTH protocol family
[    6.149741] Bluetooth: HCI device and connection manager initialized
[    6.149746] Bluetooth: HCI socket layer initialized
[    6.149749] Bluetooth: L2CAP socket layer initialized
[    6.149757] Bluetooth: SCO socket layer initialized
[    6.150321] mousedev: PS/2 mouse device common for all mice
[    6.152903] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.157609] r8169 0000:05:00.0 eth0: RTL8125B, 2c:f0:5d:60:0b:c7, XID 641, IRQ 153
[    6.157615] r8169 0000:05:00.0 eth0: jumbo features [frames: 16362 bytes, tx checksumming: ko]
[    6.195609] r8169 0000:05:00.0 enp5s0: renamed from eth0
[    6.199031] mc: Linux media interface: v0.10
[    6.199039] PTP clock support registered
[    6.211193] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    6.211494] snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
[    6.211568] videodev: Linux video capture interface: v2.00
[    6.211669] snd_hda_intel 0000:03:00.1: Force to non-snoop mode
[    6.219265] usbcore: registered new interface driver btusb
[    6.225793] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input20
[    6.225839] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input21
[    6.227490] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input22
[    6.228399] Bluetooth: hci0: Legacy ROM 2.x revision 5.0 build 25 week 20 2015
[    6.228963] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
[    6.229563] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input23
[    6.233570] Bluetooth: hci1: Found device firmware: intel/ibt-19-0-4.sfi
[    6.233672] Bluetooth: hci1: Boot Address: 0x24800
[    6.233674] Bluetooth: hci1: Firmware Version: 193-33.24
[    6.233675] Bluetooth: hci1: Firmware already loaded
[    6.237300] Bluetooth: hci1: HCI LE Coded PHY feature bit is set, but its usage is not supported.
[    6.295371] usb 2-4.1: Found UVC 1.00 device 3D Camera (28de:2400)
[    6.297331] intel_tcc_cooling: Programmable TCC Offset detected
[    6.297954] snd_hda_codec_realtek hdaudioC0D0: ALC1220: picked fixup  for PCI SSID 1462:0000
[    6.298621] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    6.298624] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.298627] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    6.298628] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.298629] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    6.298630] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.298632] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    6.298633] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    6.298635] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    6.317155] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    6.317194] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[    6.317226] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[    6.317248] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[    6.317276] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[    6.317299] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29
[    6.317324] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[    6.387617] intel_rapl_common: Found RAPL domain package
[    6.387622] intel_rapl_common: Found RAPL domain core
[    6.387623] intel_rapl_common: Found RAPL domain dram
[    6.398693] input: 3D Camera: eTronVideo as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1:1.0/input/input31
[    6.398786] usbcore: registered new interface driver uvcvideo
[    6.420525] iwlwifi 0000:00:14.3: Detected RF HR B3, rfid=0x10a100
[    6.445402] Bluetooth: hci0: Intel BT fw patch 0x43 completed & activated
[    6.486742] iwlwifi 0000:00:14.3: base HW address: 3c:58:c2:9b:3e:c6
[    6.752643] iwlwifi 0000:06:00.0: Applying debug destination EXTERNAL_DRAM
[    6.753051] iwlwifi 0000:06:00.0: Allocated 0x00400000 bytes for firmware monitor.
[    6.757509] iwlwifi 0000:06:00.0: base HW address: a4:6b:b6:96:24:ef, OTP minor version: 0x0
[    6.864609] ieee80211 phy1: Selected rate control algorithm 'iwl-mvm-rs'
[    8.218528] [drm] amdgpu kernel modesetting enabled.
[    8.218654] amdgpu: Virtual CRAT table created for CPU
[    8.218663] amdgpu: Topology: Add CPU node
[    8.218805] amdgpu 0000:03:00.0: enabling device (0006 -> 0007)
[    8.218936] [drm] initializing kernel modesetting (IP DISCOVERY 0x1002:0x747E 0x1043:0x0516 0xFF).
[    8.218949] [drm] register mmio base: 0xB0300000
[    8.218950] [drm] register mmio size: 1048576
[    8.223320] amdgpu 0000:03:00.0: amdgpu: detected ip block number 0 <soc21_common>
[    8.223323] amdgpu 0000:03:00.0: amdgpu: detected ip block number 1 <gmc_v11_0>
[    8.223324] amdgpu 0000:03:00.0: amdgpu: detected ip block number 2 <ih_v6_0>
[    8.223325] amdgpu 0000:03:00.0: amdgpu: detected ip block number 3 <psp>
[    8.223326] amdgpu 0000:03:00.0: amdgpu: detected ip block number 4 <smu>
[    8.223328] amdgpu 0000:03:00.0: amdgpu: detected ip block number 5 <dm>
[    8.223329] amdgpu 0000:03:00.0: amdgpu: detected ip block number 6 <gfx_v11_0>
[    8.223330] amdgpu 0000:03:00.0: amdgpu: detected ip block number 7 <sdma_v6_0>
[    8.223331] amdgpu 0000:03:00.0: amdgpu: detected ip block number 8 <vcn_v4_0>
[    8.223332] amdgpu 0000:03:00.0: amdgpu: detected ip block number 9 <jpeg_v4_0>
[    8.223333] amdgpu 0000:03:00.0: amdgpu: detected ip block number 10 <mes_v11_0>
[    8.223360] amdgpu 0000:03:00.0: amdgpu: Fetched VBIOS from VFCT
[    8.223361] amdgpu: ATOM BIOS: 115-D712BPL-100
[    8.231383] amdgpu 0000:03:00.0: amdgpu: CP RS64 enable
[    8.253556] Console: switching to colour dummy device 80x25
[    8.269822] amdgpu 0000:03:00.0: vgaarb: deactivate vga console
[    8.269826] amdgpu 0000:03:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[    8.269855] amdgpu 0000:03:00.0: amdgpu: MEM ECC is not presented.
[    8.269857] amdgpu 0000:03:00.0: amdgpu: SRAM ECC is not presented.
[    8.269862] amdgpu 0000:03:00.0: amdgpu: DF poison setting is inconsistent(1:0:0:0)!
[    8.269863] amdgpu 0000:03:00.0: amdgpu: Poison setting is inconsistent in DF/UMC(0:1)!
[    8.269870] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    8.269879] amdgpu 0000:03:00.0: amdgpu: VRAM: 12272M 0x0000008000000000 - 0x00000082FEFFFFFF (12272M used)
[    8.269881] amdgpu 0000:03:00.0: amdgpu: GART: 512M 0x00007FFF00000000 - 0x00007FFF1FFFFFFF
[    8.269893] [drm] Detected VRAM RAM=12272M, BAR=256M
[    8.269894] [drm] RAM width 192bits GDDR6
[    8.269981] [drm] amdgpu: 12272M of VRAM memory ready
[    8.269983] [drm] amdgpu: 7953M of GTT memory ready.
[    8.269996] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    8.270039] [drm] PCIE GART of 512M enabled (table at 0x0000008000800000).
[    8.271019] [drm] Loading DMUB firmware via PSP: version=0x07002F00
[    8.271178] amdgpu 0000:03:00.0: amdgpu: Found VCN firmware Version ENC: 1.24 DEC: 9 VEP: 0 Revision: 11
[    8.271278] amdgpu 0000:03:00.0: amdgpu: Found VCN firmware Version ENC: 1.24 DEC: 9 VEP: 0 Revision: 11
[    8.349460] amdgpu 0000:03:00.0: amdgpu: reserve 0xa700000 from 0x82e0000000 for PSP TMR
[    8.595453] amdgpu 0000:03:00.0: amdgpu: RAP: optional rap ta ucode is not available
[    8.595455] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[    8.595482] amdgpu 0000:03:00.0: amdgpu: smu driver if version = 0x0000003d, smu fw if version = 0x00000040, smu fw program = 0, smu fw version = 0x00505400 (80.84.0)
[    8.595484] amdgpu 0000:03:00.0: amdgpu: SMU driver if version not matched
[    8.603188] EXT4-fs (dm-0): mounted filesystem 3f40b608-dcfe-40b9-84e9-73a0ef50bc55 r/w with ordered data mode. Quota mode: none.
[    8.700548] amdgpu 0000:03:00.0: amdgpu: SMU is initialized successfully!
[    8.700912] [drm] Display Core v3.2.325 initialized on DCN 3.2
[    8.700913] [drm] DP-HDMI FRL PCON supported
[    8.702976] [drm] DMUB hardware initialized: version=0x07002F00
[    8.730506] snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    9.360733] amdgpu: HMM registered 12272MB device memory
[    9.362186] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    9.362196] kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
[    9.362232] amdgpu: Virtual CRAT table created for GPU
[    9.362319] amdgpu: Topology: Add dGPU node [0x747e:0x1002]
[    9.362321] kfd kfd: amdgpu: added device 1002:747e
[    9.362331] amdgpu 0000:03:00.0: amdgpu: SE 3, SH per SE 2, CU per SH 10, active_cu_number 54
[    9.362333] amdgpu 0000:03:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[    9.362335] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    9.362335] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    9.362336] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 6 on hub 0
[    9.362337] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 7 on hub 0
[    9.362337] amdgpu 0000:03:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 8 on hub 0
[    9.362338] amdgpu 0000:03:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 9 on hub 0
[    9.362339] amdgpu 0000:03:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 10 on hub 0
[    9.362339] amdgpu 0000:03:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 11 on hub 0
[    9.362340] amdgpu 0000:03:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[    9.362341] amdgpu 0000:03:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
[    9.362341] amdgpu 0000:03:00.0: amdgpu: ring vcn_unified_0 uses VM inv eng 0 on hub 8
[    9.362342] amdgpu 0000:03:00.0: amdgpu: ring vcn_unified_1 uses VM inv eng 1 on hub 8
[    9.362343] amdgpu 0000:03:00.0: amdgpu: ring jpeg_dec uses VM inv eng 4 on hub 8
[    9.362344] amdgpu 0000:03:00.0: amdgpu: ring mes_kiq_3.1.0 uses VM inv eng 14 on hub 0
[    9.364014] amdgpu 0000:03:00.0: amdgpu: Using BACO for runtime pm
[    9.364363] amdgpu 0000:03:00.0: [drm] Registered 4 planes with drm panic
[    9.364364] [drm] Initialized amdgpu 3.63.0 for 0000:03:00.0 on minor 1
[    9.371339] fbcon: amdgpudrmfb (fb0) is primary device
[    9.371666] [drm] pre_validate_dsc:1627 MST_DSC dsc precompute is not needed
[    9.573487] Console: switching to colour frame buffer device 240x67
[    9.591133] amdgpu 0000:03:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[   14.531841] EXT4-fs (dm-1): mounted filesystem a38eadba-584c-40b6-9272-c69c71024bcf r/w with ordered data mode. Quota mode: none.
[   14.717835] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.717837] Bluetooth: BNEP filters: protocol multicast
[   14.717839] Bluetooth: BNEP socket layer initialized
[   14.718688] Bluetooth: MGMT ver 1.23
[   14.718724] Bluetooth: MGMT ver 1.23
[   14.722574] NET: Registered PF_ALG protocol family
[   14.803548] Realtek Internal NBASE-T PHY r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC)
[   14.929707] r8169 0000:05:00.0 enp5s0: Link is Down
[   15.128222] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0
[   15.363922] iwlwifi 0000:06:00.0: Applying debug destination EXTERNAL_DRAM
[   15.441458] iwlwifi 0000:06:00.0: Applying debug destination EXTERNAL_DRAM
[   15.442824] iwlwifi 0000:06:00.0: FW already configured (0) - re-configuring
[   15.445776] iwlwifi 0000:06:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1
[   15.484907] iwlwifi 0000:06:00.0: Applying debug destination EXTERNAL_DRAM
[   15.562926] iwlwifi 0000:06:00.0: Applying debug destination EXTERNAL_DRAM
[   15.565149] iwlwifi 0000:06:00.0: FW already configured (0) - re-configuring
[   15.643952] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   15.694186] u32 classifier
[   15.694189]     Performance counters on
[   15.694189]     input device check on
[   15.694190]     Actions configured
[   19.163313] iwlwifi 0000:06:00.0: Applying debug destination EXTERNAL_DRAM
[   19.239773] iwlwifi 0000:06:00.0: Applying debug destination EXTERNAL_DRAM
[   19.241209] iwlwifi 0000:06:00.0: FW already configured (0) - re-configuring
[   19.244603] warning: `syncthingtray' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[   19.307664] wlan1: authenticate with 3a:98:b5:b0:89:42 (local address=a4:6b:b6:96:24:ef)
[   19.308691] wlan1: send auth to 3a:98:b5:b0:89:42 (try 1/3)
[   19.311530] wlan1: authenticated
[   19.312597] wlan1: associate with 3a:98:b5:b0:89:42 (try 1/3)
[   19.358365] wlan1: RX AssocResp from 3a:98:b5:b0:89:42 (capab=0x1511 status=0 aid=10)
[   19.359805] wlan1: associated
[   19.387709] wlan1: Limiting TX power to 27 (30 - 3) dBm as advertised by 3a:98:b5:b0:89:42
[   19.662366] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[   19.662369] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   19.866464] Bluetooth: RFCOMM TTY layer initialized
[   19.866470] Bluetooth: RFCOMM socket layer initialized
[   19.866473] Bluetooth: RFCOMM ver 1.11

`sudo dmesg | grep -i USB` from cold boot (same USB devices in same slots as last command, second boot.)

~ # sudo dmesg | grep -i USB
[sudo] password for jazztache:
[    0.012339] ACPI: SSDT 0x000000009DB2E000 001B67 (v02 ALASKA UsbCTabl 00001000 INTL 20160527)
[    0.237499] ACPI: \_SB_.PCI0.XDCI.USBC: New power resource
[    0.269333] ACPI: bus type USB registered
[    0.269343] usbcore: registered new interface driver usbfs
[    0.269348] usbcore: registered new interface driver hub
[    0.269355] usbcore: registered new device driver usb
[    0.388628] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.389867] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.389869] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.389895] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.15
[    0.389896] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.389897] usb usb1: Product: xHCI Host Controller
[    0.389898] usb usb1: Manufacturer: Linux 6.15.6-arch1-1 xhci-hcd
[    0.389899] usb usb1: SerialNumber: 0000:00:14.0
[    0.390031] hub 1-0:1.0: USB hub found
[    0.392072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.15
[    0.392074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.392075] usb usb2: Product: xHCI Host Controller
[    0.392076] usb usb2: Manufacturer: Linux 6.15.6-arch1-1 xhci-hcd
[    0.392077] usb usb2: SerialNumber: 0000:00:14.0
[    0.392161] hub 2-0:1.0: USB hub found
[    0.393303] usb: port power management may be unreliable
[    0.393702] usbcore: registered new interface driver usbserial_generic
[    0.393706] usbserial: USB Serial support registered for generic
[    0.401940] usbcore: registered new interface driver usbhid
[    0.401940] usbhid: USB HID core driver
[    0.630583] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    0.759747] usb 1-3: New USB device found, idVendor=17ef, idProduct=60d5, bcdDevice= 2.00
[    0.759760] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    0.759765] usb 1-3: Product: Lenovo Legion K500 RGB Mechanical Gaming Keyboard
[    0.759770] usb 1-3: Manufacturer: Lenovo
[    0.765144] input: Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:17EF:60D5.0001/input/input3
[    0.816380] hid-generic 0003:17EF:60D5.0001: input,hidraw0: USB HID v1.10 Keyboard [Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard] on usb-0000:00:14.0-3/input0
[    0.820833] input: Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:17EF:60D5.0002/input/input4
[    0.821073] input: Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:17EF:60D5.0002/input/input5
[    0.865683] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[    0.871977] hid-generic 0003:17EF:60D5.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard] on usb-0000:00:14.0-3/input1
[    0.874112] input: Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:17EF:60D5.0003/input/input6
[    0.877030] usb 2-4: New USB device found, idVendor=0424, idProduct=5744, bcdDevice= 2.21
[    0.877044] usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    0.877050] usb 2-4: Product: USB5744
[    0.877054] usb 2-4: Manufacturer: Microchip Tech
[    0.878372] hub 2-4:1.0: USB hub found
[    0.924820] hid-generic 0003:17EF:60D5.0003: input,hidraw2: USB HID v1.11 Keyboard [Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard] on usb-0000:00:14.0-3/input2
[    0.926112] hid-generic 0003:17EF:60D5.0004: hiddev96,hidraw3: USB HID v1.11 Device [Lenovo Lenovo Legion K500 RGB Mechanical Gaming Keyboard] on usb-0000:00:14.0-3/input3
[    1.038562] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    1.151654] usb 1-4: device descriptor read/64, error -71
[    1.366695] usb 1-4: device descriptor read/64, error -71
[    1.582582] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[    1.694631] usb 1-4: device descriptor read/64, error -71
[    1.910680] usb 1-4: device descriptor read/64, error -71
[    2.014766] usb usb1-port4: attempt power cycle
[    2.076853] usb 2-4.1: new SuperSpeed USB device number 3 using xhci_hcd
[    2.215358] usb 2-4.1: New USB device found, idVendor=28de, idProduct=2400, bcdDevice= 0.09
[    2.215371] usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.215377] usb 2-4.1: Product: 3D Camera
[    2.215382] usb 2-4.1: Manufacturer: Etron Technology, Inc.
[    2.215387] usb 2-4.1: SerialNumber: 00000001
[    2.425583] usb 1-4: new full-speed USB device number 5 using xhci_hcd
[    2.425796] usb 1-4: Device not responding to setup address.
[    2.630762] usb 1-4: Device not responding to setup address.
[    2.838613] usb 1-4: device not accepting address 5, error -71
[    2.838761] usb 1-4: WARN: invalid context state for evaluate context command.
[    2.950582] usb 1-4: new full-speed USB device number 6 using xhci_hcd
[    2.950781] usb 1-4: Device not responding to setup address.
[    3.158769] usb 1-4: Device not responding to setup address.
[    3.366587] usb 1-4: device not accepting address 6, error -71
[    3.366714] usb 1-4: WARN: invalid context state for evaluate context command.
[    3.366815] usb usb1-port4: unable to enumerate USB device
[    3.478581] usb 1-6: new full-speed USB device number 7 using xhci_hcd
[    3.604648] usb 1-6: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
[    3.604660] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.604666] usb 1-6: Product: USB Receiver
[    3.604670] usb 1-6: Manufacturer: Logitech
[    3.607551] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C52B.0005/input/input7
[    3.698999] hid-generic 0003:046D:C52B.0005: input,hidraw4: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-6/input0
[    3.702558] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C52B.0006/input/input8
[    3.702827] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C52B.0006/input/input9
[    3.753860] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C52B.0006/input/input10
[    3.754483] hid-generic 0003:046D:C52B.0006: input,hiddev97,hidraw5: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-6/input1
[    3.757368] hid-generic 0003:046D:C52B.0007: hiddev98,hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2
[    3.869581] usb 1-11: new high-speed USB device number 8 using xhci_hcd
[    3.994197] usb 1-11: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
[    3.994210] usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.994217] usb 1-11: Product: USB2.0 Hub
[    3.995842] hub 1-11:1.0: USB hub found
[    4.111609] usb 1-13: new full-speed USB device number 9 using xhci_hcd
[    4.235680] usb 1-13: New USB device found, idVendor=1462, idProduct=7c76, bcdDevice= 0.01
[    4.235692] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.235699] usb 1-13: Product: MYSTIC LIGHT
[    4.235703] usb 1-13: Manufacturer: MSI
[    4.235707] usb 1-13: SerialNumber: A02020021204
[    4.239038] input: MSI MYSTIC LIGHT  as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/0003:1462:7C76.0008/input/input12
[    4.239477] hid-generic 0003:1462:7C76.0008: input,hiddev99,hidraw7: USB HID v1.10 Device [MSI MYSTIC LIGHT ] on usb-0000:00:14.0-13/input0
[    4.296602] usb 1-11.1: new full-speed USB device number 10 using xhci_hcd
[    4.371496] usb 1-11.1: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.03
[    4.371522] usb 1-11.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.481582] usb 1-14: new full-speed USB device number 11 using xhci_hcd
[    4.606538] usb 1-14: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[    4.606551] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.751487] logitech-djreceiver 0003:046D:C52B.0007: hiddev97,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2
[    4.856277] input: Logitech Wireless Device PID:407b Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0007/0003:046D:407B.0009/input/input13
[    4.893691] input: Logitech Wireless Device PID:407b Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0007/0003:046D:407B.0009/input/input14
[    4.893859] hid-generic 0003:046D:407B.0009: input,hidraw5: USB HID v1.11 Keyboard [Logitech Wireless Device PID:407b] on usb-0000:00:14.0-6/input2:1
[    4.979372] input: Logitech MX Vertical as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/0003:046D:C52B.0007/0003:046D:407B.0009/input/input18
[    5.024030] logitech-hidpp-device 0003:046D:407B.0009: input,hidraw5: USB HID v1.11 Keyboard [Logitech MX Vertical] on usb-0000:00:14.0-6/input2:1
[    6.224252] usbcore: registered new interface driver btusb
[    6.249416] usb 2-4.1: Found UVC 1.00 device 3D Camera (28de:2400)
[    6.352701] input: 3D Camera: eTronVideo as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1:1.0/input/input31
[    6.352761] usbcore: registered new interface driver uvcvideo

`lsusb -vt`

~ # lsusb -vt
/:  Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/16p, 480M
    ID 1d6b:0002 Linux Foundation 2.0 root hub
    |__ Port 003: Dev 002, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        ID 17ef:60d5 Lenovo
    |__ Port 003: Dev 002, If 1, Class=Human Interface Device, Driver=usbhid, 12M
        ID 17ef:60d5 Lenovo
    |__ Port 003: Dev 002, If 2, Class=Human Interface Device, Driver=usbhid, 12M
        ID 17ef:60d5 Lenovo
    |__ Port 003: Dev 002, If 3, Class=Human Interface Device, Driver=usbhid, 12M
        ID 17ef:60d5 Lenovo
    |__ Port 006: Dev 007, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        ID 046d:c52b Logitech, Inc. Unifying Receiver
    |__ Port 006: Dev 007, If 1, Class=Human Interface Device, Driver=usbhid, 12M
        ID 046d:c52b Logitech, Inc. Unifying Receiver
    |__ Port 006: Dev 007, If 2, Class=Human Interface Device, Driver=usbhid, 12M
        ID 046d:c52b Logitech, Inc. Unifying Receiver
    |__ Port 011: Dev 008, If 0, Class=Hub, Driver=hub/4p, 480M
        ID 05e3:0608 Genesys Logic, Inc. Hub
        |__ Port 001: Dev 010, If 0, Class=Wireless, Driver=btusb, 12M
            ID 8087:0a2a Intel Corp. Bluetooth wireless interface
        |__ Port 001: Dev 010, If 1, Class=Wireless, Driver=btusb, 12M
            ID 8087:0a2a Intel Corp. Bluetooth wireless interface
    |__ Port 013: Dev 009, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        ID 1462:7c76 Micro Star International
    |__ Port 014: Dev 011, If 0, Class=Wireless, Driver=btusb, 12M
        ID 8087:0026 Intel Corp. AX201 Bluetooth
    |__ Port 014: Dev 011, If 1, Class=Wireless, Driver=btusb, 12M
        ID 8087:0026 Intel Corp. AX201 Bluetooth
/:  Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/10p, 10000M
    ID 1d6b:0003 Linux Foundation 3.0 root hub
    |__ Port 004: Dev 002, If 0, Class=Hub, Driver=hub/4p, 5000M
        ID 0424:5744 Microchip Technology, Inc. (formerly SMSC) Hub
        |__ Port 001: Dev 003, If 0, Class=Video, Driver=uvcvideo, 5000M
            ID 28de:2400 Valve Software
        |__ Port 001: Dev 003, If 1, Class=Video, Driver=uvcvideo, 5000M
            ID 28de:2400 Valve Software

`inxi -Jxxx`

~ # inxi -Jxxx
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 16 rev: 2.0
    speed: 480 Mb/s lanes: 1 chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-3:2 info: Lenovo Legion K500 RGB Mechanical Gaming Keyboard
    type: keyboard,HID driver: hid-generic,usbhid interfaces: 4 rev: 1.1
    speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 17ef:60d5 class-ID: 0300
  Device-2: 1-6:7 info: Logitech Unifying Receiver type: keyboard,mouse,HID
    driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
    lanes: 1 power: 98mA chip-ID: 046d:c52b class-ID: 0300
  Hub-2: 1-11:8 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
    lanes: 1 power: 100mA chip-ID: 05e3:0608 class-ID: 0900
  Device-1: 1-11.1:10 info: Intel Bluetooth wireless interface
    type: bluetooth driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1
    power: 100mA chip-ID: 8087:0a2a class-ID: e001
  Device-2: 1-13:9 info: Micro Star MYSTIC LIGHT type: HID
    driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s lanes: 1
    power: 500mA chip-ID: 1462:7c76 class-ID: 0300 serial: A02020021204
  Device-3: 1-14:11 info: Intel AX201 Bluetooth type: bluetooth
    driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA
    chip-ID: 8087:0026 class-ID: e001
  Hub-3: 2-0:1 info: super-speed hub ports: 10 rev: 3.1 speed: 10 Gb/s
    lanes: 1 chip-ID: 1d6b:0003 class-ID: 0900
  Hub-4: 2-4:2 info: Microchip (formerly SMSC) Hub ports: 4 rev: 3.2
    speed: 5 Gb/s lanes: 1 chip-ID: 0424:5744 class-ID: 0900
  Device-1: 2-4.1:3 info: Valve 3D Camera type: video driver: uvcvideo
    interfaces: 2 rev: 3.2 speed: 5 Gb/s lanes: 1 power: 800mA
    chip-ID: 28de:2400 class-ID: 0e02 serial: 00000001

`usb-devices`

~ # usb-devices
                                                                                                                                                                            
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh=16
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=06.15
S:  Manufacturer=Linux 6.15.6-arch1-1 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:00:14.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms
                                                                                                                                                                            
T:  Bus=01 Lev=01 Prnt=01 Port=10 Cnt=01 Dev#=  8 Spd=480  MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0608 Rev=88.32
S:  Product=USB2.0 Hub
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms
                                                                                                                                                                            
T:  Bus=01 Lev=02 Prnt=08 Port=00 Cnt=01 Dev#= 10 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0a2a Rev=00.03
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
                                                                                                                                                                            
T:  Bus=01 Lev=01 Prnt=10 Port=12 Cnt=01 Dev#=  9 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1462 ProdID=7c76 Rev=00.01
S:  Manufacturer=MSI
S:  Product=MYSTIC LIGHT
S:  SerialNumber=A02020021204
C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 0 Alt= 0 #EPs= 2 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=02(O) Atr=03(Int.) MxPS=  64 Ivl=5ms
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=5ms

T:  Bus=01 Lev=01 Prnt=09 Port=13 Cnt=01 Dev#= 11 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0026 Rev=00.02
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms

T:  Bus=01 Lev=01 Prnt=11 Port=02 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=17ef ProdID=60d5 Rev=02.00
S:  Manufacturer=Lenovo
S:  Product=Lenovo Legion K500 RGB Mechanical Gaming Keyboard
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=100mA
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=  32 Ivl=1ms
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=4ms
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 2 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=83(I) Atr=03(Int.) MxPS=  32 Ivl=4ms
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 3 Alt= 0 #EPs= 2 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=04(O) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=1ms

T:  Bus=01 Lev=01 Prnt=02 Port=05 Cnt=01 Dev#=  7 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=046d ProdID=c52b Rev=12.11
S:  Manufacturer=Logitech
S:  Product=USB Receiver
C:  #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=98mA
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=8ms
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=2ms
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 2 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=83(I) Atr=03(Int.) MxPS=  32 Ivl=2ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=10000 MxCh=10
D:  Ver= 3.10 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev=06.15
S:  Manufacturer=Linux 6.15.6-arch1-1 xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:00:14.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  2 Spd=5000 MxCh= 4
D:  Ver= 3.20 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=0424 ProdID=5744 Rev=02.21
S:  Manufacturer=Microchip Tech
S:  Product=USB5744
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=13(Int.) MxPS=   2 Ivl=16ms

T:  Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=28de ProdID=2400 Rev=00.09
S:  Manufacturer=Etron Technology, Inc.
S:  Product=3D Camera
S:  SerialNumber=00000001
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=800mA
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
E:  Ad=83(I) Atr=03(Int.) MxPS=  32 Ivl=128ms
/usr/bin/usb-devices: line 103: printf: : invalid number
I:  If#= 1 Alt= 0 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

System Specs (from `neofetch`)

OS: Arch Linux x86_64
Host: MS-7C76 1.0
Kernel: 6.15.6-arch1-1
Uptime: 3 mins
Packages: 2733 (pacman), 38 (flatpak)
Shell: fish 4.0.2
Resolution: 1920x1080
DE: Hyprland
WM: sway
Theme: Breeze-Dark [GTK2], Breeze [GTK3]
Icons: breeze-dark [GTK2/3]
Terminal: zellij
CPU: Intel i7-10700K (16) @ 5.100GHz
GPU: AMD ATI Radeon RX 7700 XT / 7800 XT
Memory: 1295MiB / 15906MiB

[h2]Unsure about Cable Damage[/h2]

- The cable has a small crease. It's not on the headset part of the cable, it's on the part between the headset connector and the Link Box.
    - The crease was there before, but didn't cause any issues.
    - Cannot RMA due to it being an American import from eBay

Fairly sure that this isn't the cause. I wouldn't rule it out though.
If there is any way to diagnose cable health from Arch that would be nice.

[h2]Resources I Have Read[/h2]

https://askubuntu.com/questions/7704/un … usb-device - No clue how to test my USB ports for hardware damage...
https://man.archlinux.org/man/lsusb.8.en - lsusb is very useful to check what was connected
https://superuser.com/questions/875922/ … with-linux - The documentation file isn't on my system...
https://paulphilippov.com/articles/how- … ress-error - Did this, but it didn't work, same errors.
https://www.baeldung.com/linux/control-usb-power-supply - I tried one of these commands, but got an 'access denied' error even with sudo, so I tried looking for something that felt less intrusive.
https://unix.stackexchange.com/question … 8-error-71 - This is why I think power management might be an issue due to over-current.
https://wiki.archlinux.org/title/Power_management - Don't know the device product or vendor IDs....
https://unix.stackexchange.com/question … ually-mean - I saw this before, but it went away on its own. Not sure if I solved this, if it's a seperate issue, or something else. Might be relevant.
https://unix.stackexchange.com/question … et-address - 'open: Permission denied'
https://libreddit.kavin.rocks/r/ValveIn … at_may_be/ - Windows, but likely also points to power management being the issue.
https://unix.stackexchange.com/question … e-that-ode - This likely indicates that the USB is failing pretty early, and that doing stuff by device or vendor ID might not be the way to go.
https://forums.tomshardware.com/threads … b.3601070/ - Not sure which of my ports are on the same hub.
https://steamcommunity.com/app/1059530/ … 486950004/ - This seems to re-inforce that this is not OS-specific
https://bbs.archlinux.org/viewtopic.php?id=272328 - I'm using systemd-boot and not GRUB, so not sure how to do the equivalent of this.

[h2]What I Know[/h2]

- Internally, the Index Link Box is potentially treated as a USB hub.
    - Likely, the 'Microchip Technology, Inc (formerly SMSC) Hub'.

- It could be something related to power draw, even though I recently upgraded my power supply to be 1000w.
- Might be something with the USB ports

I also learned that if you plug in a knuckle controller and try to open MonadoXR, you get a USB conflict, and Monado doesn't want to start.

Info	[/home/jazztache/.local/share/envision/monado/src/xrt/ipc/server/ipc_server_process.c:ipc_server_main]
	Monado(XRT) by Collabora et al 'v25.0.0-200-g3af6b85d5' starting up...
Error	[/home/jazztache/.local/share/envision/monado/src/xrt/state_trackers/prober/p_prober.c:p_dev_get_usb_dev]
	USB device with same address but different vendor and product found!
	vendor:  046d 046d
	product: c52b 407b
Info	[/home/jazztache/.local/share/envision/monado/src/xrt/drivers/steamvr_lh/steamvr_lh.cpp:steamvr_lh_create_devices]
	Found SteamVR install: /home/jazztache/.local/share/Steam/steamapps/common/SteamVR
Info	[/home/jazztache/.local/share/envision/monado/src/xrt/drivers/steamvr_lh/steamvr_lh.cpp:TrackedDeviceAdded]
	New device added: LHR-8B23EDEF
Info	[/home/jazztache/.local/share/envision/monado/src/xrt/drivers/steamvr_lh/steamvr_lh.cpp:TrackedDeviceAdded]
	Found lighthouse controller: LHR-8B23EDEF
Info	[/home/jazztache/.local/share/envision/monado/src/xrt/drivers/steamvr_lh/device.cpp:init_chaperone]
	Found info for universe 1751338574
Info	[/home/jazztache/.local/share/envision/monado/src/xrt/drivers/steamvr_lh/device.cpp:init_chaperone]
	Initialized chaperone data.
Warning	[/home/jazztache/.local/share/envision/monado/src/xrt/drivers/steamvr_lh/device.cpp:get_input_from_name]
	requested unknown input name /input/grip/touch for device LHR-8B23EDEF
Warning	[/home/jazztache/.local/share/envision/monado/src/xrt/drivers/steamvr_lh/device.cpp:get_finger_from_name]
	requested unknown finger name /input/grip/touch for device LHR-8B23EDEF
Info	[/home/jazztache/.local/share/envision/monado/src/xrt/drivers/steamvr_lh/steamvr_lh.cpp:steamvr_lh_create_devices]
	Lighthouse initialization complete, giving time to setup connected devices...
Info	[/home/jazztache/.local/share/envision/monado/src/xrt/drivers/steamvr_lh/steamvr_lh.cpp:steamvr_lh_create_devices]
	Device search time complete.
Error	[/home/jazztache/.local/share/envision/monado/src/xrt/targets/common/target_builder_steamvr.c:steamvr_open_system]
	Unable to find HMD
Info	[/home/jazztache/.local/share/envision/monado/src/xrt/state_trackers/prober/p_prober.c:p_create_system]
	Creating system:
	Builders:
		qwerty: Qwerty devices builder
		remote: Remote simulation devices builder
		simulated: Simulated devices builder
		rift_s: Oculus Rift S
		rgb_tracking: RGB tracking based devices (PSVR, PSMV, ...)
		steamvr: SteamVR proprietary wrapper (Vive, Index, Tundra trackers, etc.) devices builder
		lighthouse: Lighthouse-tracked FLOSS (Vive, Index, Tundra trackers, etc.) devices builder
		wmr: Windows Mixed Reality
		xreal_air: Xreal Air
		legacy: Legacy probing system
	No builder selected in config (or wasn't compiled in)
	Selected steamvr because it was certain it could create a head
	Using builder steamvr: SteamVR proprietary wrapper (Vive, Index, Tundra trackers, etc.) devices builder
	Result: XRT_ERROR_DEVICE_CREATION_FAILED
Error	[/home/jazztache/.local/share/envision/monado/src/xrt/ipc/server/ipc_server_process.c:init_all]
	Could not create system!
Info	[/home/jazztache/.local/share/envision/monado/src/xrt/ipc/server/ipc_server_process.c:print_linux_end_user_failed_information]
	
################################################################################
#                                                                              #
#                  The Monado service has failed to start.                     #
#                                                                              #
# If you want to report please upload the logs of the service as a text file.  #
# You can also capture the output the monado-cli info command to provide more  #
# information about your system, that will help diagnosing your problem. The   #
# below commands is how you best capture the information from the commands.    #
#                                                                              #
#     monado-cli info 2>&1 | tee info.txt                                      #
#     monado-service 2>&1 | tee logs.txt                                       #
#                                                                              #
################################################################################
Monado exited with code 255

...Which likely means that the USB Vendor is still somehow being picked up...

I feel like I have done a good enough job diagnosing the issue, and I am just looking to see where I can go from here.
Any and all help is appreciated. If you can provide detailed instructions on what parts of the wiki are most helpful, or which steps to take, that would be very helpful.
I made sure to include as much info as possible, so if this gets indexed by search engines, other people can debug their setup as well.

Last edited by Jazztache (2026-01-06 04:29:49)

mmy8x

Member

Registered: 2025-03-02

Posts: 88

Re: [SOLVED] Valve Index USB - 'unable to enumerate USB device'

Does it help if you dowgrade the kernel package to a version which you were using when the USB device worked?

Did you try plugging it into other machines to see if it completes enumeration?

Jazztache

Member

Registered: 2022-10-07

Posts: 63

Re: [SOLVED] Valve Index USB - 'unable to enumerate USB device'

Does it help if you dowgrade the kernel package to a version which you were using when the USB device worked?

I could do that. I might look into this soon. I did do an update recently, so that may have done it. I might target 6.14.7, since that's the last major version. I know that downgrading is just `pacman -U <kernel package>`.  How do I also downgrade headers and firmware as a group to 6.14.7?

Did you try plugging it into other machines to see if it completes enumeration?

I have one Linux desktop and I am the only one in the house that has one. No dice...

Last edited by Jazztache (2025-07-17 07:49:33)

mmy8x

Member

Registered: 2025-03-02

Posts: 88

Re: [SOLVED] Valve Index USB - 'unable to enumerate USB device'

So try it with Windows. If it still doesn't work you will know that something happened to the hardware itself.

You can pass multiple packages at once to 'pacman -U'.

Last edited by mmy8x (2025-07-17 08:21:49)

Jazztache

Member

Registered: 2022-10-07

Posts: 63

Re: [SOLVED] Valve Index USB - 'unable to enumerate USB device'

Hello!

We have a resolution! It was a hardware error.
Turns out the connector was dirty. This is likely from being bought used.

We used some DeoxITD5 on the connector between the link box and the headset. It started working immediately. The gold connectors also shine through quite nicely now

I got to use someone else's Windows PC. We also found out the device descriptor could not be found in Windows Device Manager.

After applying the spray on the connector, Windows picked it up. Running `lsusb` also shows it working perfectly as well. Envision also picks up the headset's motion as well!

Note to anyone who is outside the US and buying used as an import: clean your connectors! Find something that is made for electronics and clean out the connectors.

This is likely a hardware issue; so make sure to do some hardware maintenance after buying used if something seems amiss.

Solved!

Last edited by Jazztache (2025-07-19 03:26:51)

Jazztache

Member

Registered: 2022-10-07

Posts: 63

Re: [SOLVED] Valve Index USB - 'unable to enumerate USB device'

Update...

Unfortunately, that fix only worked for a few minutes. The cable was faulty and unreliable.
Specifically, the Trident cable. In between where it connects to the Tether cable (to the headset) and the Link Box itself.

We even applied the deoxidising spray to the plug going into the headset... still no dice.

Looking into buying a brand new cable soon.

Last edited by Jazztache (2025-07-19 05:38:28)

Jazztache

Member

Registered: 2022-10-07

Posts: 63

Re: [SOLVED] Valve Index USB - 'unable to enumerate USB device'

Boo! I'm back.
Turns out it WAS a cable issue. Bought the cable in November, got it delivered in December, and just today I got everything working. I can even get Monado up, but I have a separate issue as well. Might be something for a new thread if I cannot figure it out on my own.

To anyone who has a very similar issue, try buying some new cables. I got mine from iFixit.