Microphone doesn't work? [SOLVED]

VoltPleiar · 2025-07-19 00:16:02

Hello! I have been tinkering around for a while, checked out some forums but I couldn't figure out what's going wrong here, my microphone won't show up and it will only recognize my webcam's microphone, which is not good, to put it in kind words, I have audio outputs working for the rear panel and front chassis, it automatically defaults to the front one whenever I plug in earphones, my speakers are plugged in the motherboard, so is my dedicated microphone, on the 2,5mm jack, not a USB connection and not connected to one of my monitors, I know this is a common issue because I've seen a lot of posts about this but I just cannot seem to get it right! Please help!

Last edited by VoltPleiar (2025-07-21 22:03:24)

VoltPleiar · 2025-07-19 00:26:58

This is the whole audio description I pulled out of de audio information.

Module #1
	Name: libpipewire-module-rt
	Argument: {
            nice.level    = -11
            rt.prio       = 88
            #rt.time.soft = -1
            #rt.time.hard = -1
            #uclamp.min = 0
            #uclamp.max = 1024
        }
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-rt"
		object.id = "1"
		object.serial = "1"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Use realtime thread scheduling, falling back to RTKit"
		module.usage = "( nice.level=<priority: default 20(don't change)> ) ( rt.prio=<priority: default 83> ) ( rt.time.soft=<in usec: default -1> ) ( rt.time.hard=<in usec: default -1> ) ( rlimits.enabled=<default true> ) ( rtportal.enabled=<default true> ) ( rtkit.enabled=<default true> ) ( uclamp.min=<default 0> ) ( uclamp.max=<default 1024> )"
		module.version = "1.4.6"
		nice.level = "-11"
		rt.prio = "88"

Module #2
	Name: libpipewire-module-protocol-native
	Argument: {
            # List of server Unix sockets, and optionally permissions
            #sockets = [ { name = "pipewire-0" }, { name = "pipewire-0-manager" } ]
        }
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-protocol-native"
		object.id = "2"
		object.serial = "2"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Native protocol using unix sockets"
		module.version = "1.4.6"

Module #4
	Name: libpipewire-module-profiler
	Argument: {
            #profile.interval.ms = 0
        }
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-profiler"
		object.id = "4"
		object.serial = "4"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Generate Profiling data"
		module.usage = "( profile.interval.ms=<minimum interval for sampling data (in ms) ) "
		module.version = "1.4.6"

Module #6
	Name: libpipewire-module-metadata
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-metadata"
		object.id = "6"
		object.serial = "6"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Allow clients to create metadata store"
		module.version = "1.4.6"

Module #8
	Name: libpipewire-module-spa-device-factory
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-spa-device-factory"
		object.id = "8"
		object.serial = "8"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Provide a factory to make SPA devices"
		module.version = "1.4.6"

Module #10
	Name: libpipewire-module-spa-node-factory
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-spa-node-factory"
		object.id = "10"
		object.serial = "10"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Provide a factory to make SPA nodes"
		module.version = "1.4.6"

Module #12
	Name: libpipewire-module-client-node
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-client-node"
		object.id = "12"
		object.serial = "12"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Allow clients to create and control remote nodes"
		module.version = "1.4.6"

Module #14
	Name: libpipewire-module-client-device
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-client-device"
		object.id = "14"
		object.serial = "14"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Allow clients to create and control remote devices"
		module.version = "1.4.6"

Module #16
	Name: libpipewire-module-portal
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-portal"
		object.id = "16"
		object.serial = "16"

Module #17
	Name: libpipewire-module-access
	Argument: {
            # Socket-specific access permissions
            #access.socket = { pipewire-0 = "default", pipewire-0-manager = "unrestricted" }

            # Deprecated legacy mode (not socket-based),
            # for now enabled by default if access.socket is not specified
            #access.legacy = true
        }
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-access"
		object.id = "17"
		object.serial = "17"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Perform access check"
		module.usage = "( access.socket={ <socket>=<access>, ... } ) ( access.legacy=true ) "
		module.version = "1.4.6"

Module #18
	Name: libpipewire-module-adapter
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-adapter"
		object.id = "18"
		object.serial = "18"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Manage adapter nodes"
		module.version = "1.4.6"

Module #20
	Name: libpipewire-module-link-factory
	Argument: {
            #allow.link.passive = false
	}
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-link-factory"
		object.id = "20"
		object.serial = "20"
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Allow clients to create links"
		module.usage = "( allow.link.passive=<bool, default false> ) "
		module.version = "1.4.6"

Module #22
	Name: libpipewire-module-session-manager
	Argument: 
	Usage counter: n/a
	Properties:
		module.name = "libpipewire-module-session-manager"
		object.id = "22"
		object.serial = "22"
		module.author = "George Kiagiadakis <george.kiagiadakis@collabora.com>"
		module.description = "Implements objects for session management"
		module.version = "1.4.6"

Module #536870912
	Name: module-always-sink
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Pauli Virtanen <pav@iki.fi>"
		module.description = "Always keeps at least one sink loaded even if it's a null one"
		module.usage = "sink_name=<name of sink>"
		module.version = "1.4.6"

Module #536870913
	Name: module-device-manager
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Keep track of devices (and their descriptions) both past and present and prioritise by role"
		module.usage = "do_routing=<Automatically route streams based on a priority list (unique per-role)?> on_hotplug=<When new device becomes available, recheck streams?> on_rescue=<When device becomes unavailable, recheck streams?>"
		module.version = "1.4.6"

Module #536870914
	Name: module-device-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Automatically restore the volume/mute state of devices"
		module.usage = "restore_port=<Save/restore port?> restore_volume=<Save/restore volumes?> restore_muted=<Save/restore muted states?> restore_formats=<Save/restore saved formats?>"
		module.version = "1.4.6"

Module #536870915
	Name: module-stream-restore
	Argument: 
	Usage counter: n/a
	Properties:
		module.author = "Wim Taymans <wim.taymans@gmail.com>"
		module.description = "Automatically restore the volume/mute/device state of streams"
		module.usage = "restore_device=<Save/restore sinks/sources?> restore_volume=<Save/restore volumes?> restore_muted=<Save/restore muted states?> on_hotplug=<This argument is obsolete, please remove it from configuration> on_rescue=<This argument is obsolete, please remove it from configuration> fallback_table=<filename>"
		module.version = "1.4.6"

Sink #1806
	State: SUSPENDED
	Name: alsa_output.pci-0000_10_00.1.hdmi-stereo
	Description: HDA NVidia Estéreo digital (HDMI)
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	Base Volume: 65536 / 100% / 0,00 dB
	Monitor Source: alsa_output.pci-0000_10_00.1.hdmi-stereo.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS 
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA NVidia"
		alsa.class = "generic"
		alsa.components = "HDA:10de0094,10de1363,00100100"
		alsa.device = "3"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "HDMI 0"
		alsa.long_card_name = "HDA NVidia at 0xfc080000 irq 74"
		alsa.mixer_name = "Nvidia GPU 94 HDMI/DP"
		alsa.name = "PHILCO"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HDA NVidia at 0xfc080000 irq 74"
		api.alsa.card.name = "HDA NVidia"
		api.alsa.path = "hdmi:0"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "4"
		device.api = "alsa"
		device.class = "sound"
		device.icon_name = "audio-card-analog"
		device.id = "54"
		device.profile.description = "Estéreo digital (HDMI)"
		device.profile.name = "hdmi-stereo"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		iec958.codecs = "[\"PCM\"]"
		media.class = "Audio/Sink"
		device.description = "HDA NVidia"
		node.name = "alsa_output.pci-0000_10_00.1.hdmi-stereo"
		node.nick = "PHILCO"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:NVidia:4:playback"
		port.group = "playback"
		priority.driver = "696"
		priority.session = "696"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "42"
		object.serial = "1806"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:10:00.1"
		device.enum.api = "udev"
		device.name = "alsa_card.pci-0000_10_00.1"
		device.nick = "HDA NVidia"
		device.plugged.usec = "5756247"
		device.product.id = "0x10fa"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:10:00.1/sound/card0"
		device.vendor.id = "0x10de"
		device.vendor.name = "NVIDIA Corporation"
		spa.object.id = "2"
		device.string = "0"
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
	Active Port: hdmi-output-0
	Formats:
		pcm

Sink #1807
	State: RUNNING
	Name: alsa_output.pci-0000_30_00.6.analog-stereo
	Description: Family 17h/19h/1ah HD Audio Controller Estéreo analógico
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	Base Volume: 65536 / 100% / 0,00 dB
	Monitor Source: alsa_output.pci-0000_30_00.6.analog-stereo.monitor
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0897,1462ec56,00100402"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "ALC897 Analog"
		alsa.long_card_name = "HD-Audio Generic at 0xfc500000 irq 77"
		alsa.mixer_name = "Realtek ALC897"
		alsa.name = "ALC897 Analog"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc500000 irq 77"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "front:2"
		api.alsa.pcm.card = "2"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "5"
		device.api = "alsa"
		device.class = "sound"
		device.icon_name = "audio-card-analog"
		device.id = "59"
		device.profile.description = "Estéreo analógico"
		device.profile.name = "analog-stereo"
		device.routes = "2"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Family 17h/19h/1ah HD Audio Controller"
		node.name = "alsa_output.pci-0000_30_00.6.analog-stereo"
		node.nick = "ALC897 Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Generic_1:5:playback"
		port.group = "playback"
		priority.driver = "1009"
		priority.session = "1009"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "55"
		object.serial = "1807"
		node.max-latency = "16384/48000"
		api.alsa.period-size = "1024"
		api.alsa.period-num = "32"
		api.alsa.headroom = "0"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "2"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:30:00.6"
		device.enum.api = "udev"
		device.name = "alsa_card.pci-0000_30_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "5848113"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h/1ah HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:30:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		spa.object.id = "6"
		device.string = "2"
	Ports:
		analog-output-lineout: Saída de linha (type: Line, priority: 9000, availability group: Legacy 4, available)
		analog-output-headphones: Fones de ouvido (type: Headphones, priority: 9900, availability group: Legacy 5, available)
	Active Port: analog-output-headphones
	Formats:
		pcm

Source #1806
	State: SUSPENDED
	Name: alsa_output.pci-0000_10_00.1.hdmi-stereo.monitor
	Description: Monitor of HDA NVidia Estéreo digital (HDMI)
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	Base Volume: 65536 / 100% / 0,00 dB
	Monitor of Sink: alsa_output.pci-0000_10_00.1.hdmi-stereo
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "0"
		alsa.card_name = "HDA NVidia"
		alsa.class = "generic"
		alsa.components = "HDA:10de0094,10de1363,00100100"
		alsa.device = "3"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "HDMI 0"
		alsa.long_card_name = "HDA NVidia at 0xfc080000 irq 74"
		alsa.mixer_name = "Nvidia GPU 94 HDMI/DP"
		alsa.name = "PHILCO"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HDA NVidia at 0xfc080000 irq 74"
		api.alsa.card.name = "HDA NVidia"
		api.alsa.path = "hdmi:0"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "4"
		device.api = "alsa"
		device.class = "monitor"
		device.icon_name = "audio-card-analog"
		device.id = "54"
		device.profile.description = "Estéreo digital (HDMI)"
		device.profile.name = "hdmi-stereo"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		iec958.codecs = "[\"PCM\"]"
		media.class = "Audio/Sink"
		device.description = "HDA NVidia"
		node.name = "alsa_output.pci-0000_10_00.1.hdmi-stereo"
		node.nick = "PHILCO"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:NVidia:4:playback"
		port.group = "playback"
		priority.driver = "696"
		priority.session = "696"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "42"
		object.serial = "1806"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:10:00.1"
		device.enum.api = "udev"
		device.name = "alsa_card.pci-0000_10_00.1"
		device.nick = "HDA NVidia"
		device.plugged.usec = "5756247"
		device.product.id = "0x10fa"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:10:00.1/sound/card0"
		device.vendor.id = "0x10de"
		device.vendor.name = "NVIDIA Corporation"
		spa.object.id = "2"
		device.string = "0"
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
	Active Port: hdmi-output-0
	Formats:
		pcm

Source #1807
	State: RUNNING
	Name: alsa_output.pci-0000_30_00.6.analog-stereo.monitor
	Description: Monitor of Family 17h/19h/1ah HD Audio Controller Estéreo analógico
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	Base Volume: 65536 / 100% / 0,00 dB
	Monitor of Sink: alsa_output.pci-0000_30_00.6.analog-stereo
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0897,1462ec56,00100402"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "ALC897 Analog"
		alsa.long_card_name = "HD-Audio Generic at 0xfc500000 irq 77"
		alsa.mixer_name = "Realtek ALC897"
		alsa.name = "ALC897 Analog"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc500000 irq 77"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "front:2"
		api.alsa.pcm.card = "2"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "5"
		device.api = "alsa"
		device.class = "monitor"
		device.icon_name = "audio-card-analog"
		device.id = "59"
		device.profile.description = "Estéreo analógico"
		device.profile.name = "analog-stereo"
		device.routes = "2"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Family 17h/19h/1ah HD Audio Controller"
		node.name = "alsa_output.pci-0000_30_00.6.analog-stereo"
		node.nick = "ALC897 Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Generic_1:5:playback"
		port.group = "playback"
		priority.driver = "1009"
		priority.session = "1009"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "55"
		object.serial = "1807"
		node.max-latency = "16384/48000"
		api.alsa.period-size = "1024"
		api.alsa.period-num = "32"
		api.alsa.headroom = "0"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "2"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "pci"
		device.bus_path = "pci-0000:30:00.6"
		device.enum.api = "udev"
		device.name = "alsa_card.pci-0000_30_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "5848113"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h/1ah HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:30:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		spa.object.id = "6"
		device.string = "2"
	Ports:
		analog-output-lineout: Saída de linha (type: Line, priority: 9000, availability group: Legacy 4, available)
		analog-output-headphones: Fones de ouvido (type: Headphones, priority: 9900, availability group: Legacy 5, available)
	Active Port: analog-output-headphones
	Formats:
		pcm

Source #2296
	State: RUNNING
	Name: alsa_input.usb-Vimicro_Corp._Lenovo_FHD_Webcam_Lenovo_FHD_Webcam_Audio-02.iec958-stereo
	Description: Lenovo FHD Webcam Estéreo digital (IEC958)
	Driver: PipeWire
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 57825 /  88% / -3,26 dB,   front-right: 57825 /  88% / -3,26 dB
	        balance 0,00
	Base Volume: 65536 / 100% / 0,00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "3"
		alsa.card_name = "Lenovo FHD Webcam"
		alsa.class = "generic"
		alsa.components = "USB17ef:4831"
		alsa.device = "0"
		alsa.driver_name = "snd_usb_audio"
		alsa.id = "USB Audio"
		alsa.long_card_name = "Vimicro Corp. Lenovo FHD Webcam at usb-0000:16:00.0-10, high speed"
		alsa.mixer_name = "USB Mixer"
		alsa.name = "USB Audio"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "Vimicro Corp. Lenovo FHD Webcam at usb-0000:16:00.0-10, high speed"
		api.alsa.card.name = "Lenovo FHD Webcam"
		api.alsa.path = "iec958:3"
		api.alsa.pcm.card = "3"
		api.alsa.pcm.stream = "capture"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "2"
		device.api = "alsa"
		device.class = "sound"
		device.icon_name = "audio-card-analog"
		device.id = "45"
		device.profile.description = "Estéreo digital (IEC958)"
		device.profile.name = "iec958-stereo"
		device.routes = "1"
		factory.name = "api.alsa.pcm.source"
		media.class = "Audio/Source"
		device.description = "Lenovo FHD Webcam"
		node.name = "alsa_input.usb-Vimicro_Corp._Lenovo_FHD_Webcam_Lenovo_FHD_Webcam_Audio-02.iec958-stereo"
		node.nick = "Lenovo FHD Webcam"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Webcam:2:capture"
		port.group = "capture"
		priority.driver = "2008"
		priority.session = "2008"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "68"
		object.serial = "2296"
		node.max-latency = "16384/48000"
		api.alsa.period-size = "128"
		api.alsa.period-num = "256"
		api.alsa.headroom = "128"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "3"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio3"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus = "usb"
		device.bus-id = "usb-Vimicro_Corp._Lenovo_FHD_Webcam_Lenovo_FHD_Webcam_Audio-02"
		device.bus_path = "pci-0000:16:00.0-usb-0:10:1.2"
		device.enum.api = "udev"
		device.form_factor = "webcam"
		device.name = "alsa_card.usb-Vimicro_Corp._Lenovo_FHD_Webcam_Lenovo_FHD_Webcam_Audio-02"
		device.nick = "Lenovo FHD Webcam"
		device.plugged.usec = "5835065"
		device.product.id = "0x4831"
		device.product.name = "Lenovo FHD Webcam"
		device.serial = "Vimicro_Corp._Lenovo_FHD_Webcam_Lenovo_FHD_Webcam_Audio"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:16:00.0/usb1/1-10/1-10:1.2/sound/card3"
		device.vendor.id = "0x17ef"
		device.vendor.name = "Lenovo"
		spa.object.id = "8"
		device.string = "3"
	Ports:
		iec958-stereo-input: Entrada digital (S/PDIF) (type: SPDIF, priority: 0, availability unknown)
	Active Port: iec958-stereo-input
	Formats:
		pcm

Sink Input #1891
	Driver: PipeWire
	Owner Module: n/a
	Client: 87
	Sink: 1807
	Sample Specification: float32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Format: pcm, format.sample_format = "\"float32le\""  format.rate = "48000"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: yes
	Mute: no
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	Buffer Latency: 0 usec
	Sink Latency: 0 usec
	Resample method: PipeWire
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "Firefox"
		application.process.id = "1505"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "firefox"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		media.name = "LDI - Pediatria"
		pulse.corked = "true"
		node.rate = "1/48000"
		node.latency = "3600/48000"
		stream.is-live = "true"
		node.name = "Firefox"
		node.want-driver = "true"
		node.autoconnect = "true"
		media.class = "Stream/Output/Audio"
		port.group = "stream.0"
		adapt.follower.spa-node = ""
		object.register = "false"
		factory.id = "7"
		clock.quantum-limit = "8192"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		client.id = "80"
		object.id = "113"
		object.serial = "1891"
		pulse.attr.maxlength = "4194304"
		pulse.attr.tlength = "48000"
		pulse.attr.prebuf = "38408"
		pulse.attr.minreq = "9600"
		module-stream-restore.id = "sink-input-by-application-name:Firefox"

Sink Input #2217
	Driver: PipeWire
	Owner Module: n/a
	Client: 2216
	Sink: 1807
	Sample Specification: float32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Format: pcm, format.sample_format = "\"float32le\""  format.rate = "48000"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: no
	Mute: no
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	Buffer Latency: 0 usec
	Sink Latency: 0 usec
	Resample method: PipeWire
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		pipewire.access.portal.app_id = "dev.vencord.Vesktop"
		media.category = "Manager"
		pipewire.client.access = "flatpak"
		application.name = "Chromium"
		application.process.id = "140"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "vesktop.bin"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		application.icon_name = "chromium-browser"
		media.name = "Playback"
		pulse.corked = "false"
		node.rate = "1/48000"
		node.latency = "512/48000"
		stream.is-live = "true"
		node.name = "Chromium"
		node.want-driver = "true"
		node.autoconnect = "true"
		media.class = "Stream/Output/Audio"
		port.group = "stream.0"
		adapt.follower.spa-node = ""
		object.register = "false"
		factory.id = "7"
		clock.quantum-limit = "8192"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		client.id = "73"
		object.id = "88"
		object.serial = "2217"
		pulse.attr.maxlength = "4194304"
		pulse.attr.tlength = "8192"
		pulse.attr.prebuf = "6152"
		pulse.attr.minreq = "2048"
		node.driver-id = "55"
		module-stream-restore.id = "sink-input-by-application-name:Chromium"

Source Output #2228
	Driver: PipeWire
	Owner Module: n/a
	Client: 1993
	Source: 2296
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Format: pcm, format.sample_format = "\"s16le\""  format.rate = "48000"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: no
	Mute: no
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	Buffer Latency: 0 usec
	Source Latency: 0 usec
	Resample method: PipeWire
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		pipewire.access.portal.app_id = "dev.vencord.Vesktop"
		media.category = "Manager"
		pipewire.client.access = "flatpak"
		application.name = "Chromium input"
		application.process.id = "140"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "vesktop.bin"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		application.icon_name = "chromium-browser"
		media.name = "RecordStream"
		pulse.corked = "false"
		node.rate = "1/48000"
		node.latency = "480/48000"
		target.object = "alsa_input.usb-Vimicro_Corp._Lenovo_FHD_Webcam_Lenovo_FHD_Webcam_Audio-02.analog-stereo"
		stream.is-live = "true"
		node.name = "Chromium input"
		node.want-driver = "true"
		node.autoconnect = "true"
		media.class = "Stream/Input/Audio"
		port.group = "stream.0"
		adapt.follower.spa-node = ""
		object.register = "false"
		factory.id = "7"
		clock.quantum-limit = "8192"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		client.id = "101"
		object.id = "95"
		object.serial = "2228"
		pulse.attr.maxlength = "4194304"
		pulse.attr.fragsize = "1920"
		node.driver-id = "68"
		module-stream-restore.id = "source-output-by-application-name:Chromium input"

Source Output #2235
	Driver: PipeWire
	Owner Module: n/a
	Client: 1993
	Source: 2296
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Format: pcm, format.sample_format = "\"s16le\""  format.rate = "48000"  format.channels = "2"  format.channel_map = "\"front-left,front-right\""
	Corked: no
	Mute: no
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	Buffer Latency: 0 usec
	Source Latency: 0 usec
	Resample method: PipeWire
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		pipewire.access.portal.app_id = "dev.vencord.Vesktop"
		media.category = "Manager"
		pipewire.client.access = "flatpak"
		application.name = "Chromium input"
		application.process.id = "140"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "vesktop.bin"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		application.icon_name = "chromium-browser"
		media.name = "RecordStream"
		pulse.corked = "false"
		node.rate = "1/48000"
		node.latency = "480/48000"
		stream.is-live = "true"
		node.name = "Chromium input"
		node.want-driver = "true"
		node.autoconnect = "true"
		media.class = "Stream/Input/Audio"
		port.group = "stream.0"
		adapt.follower.spa-node = ""
		object.register = "false"
		factory.id = "7"
		clock.quantum-limit = "8192"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		client.id = "101"
		object.id = "94"
		object.serial = "2235"
		pulse.attr.maxlength = "4194304"
		pulse.attr.fragsize = "1920"
		node.driver-id = "68"
		module-stream-restore.id = "source-output-by-application-name:Chromium input"

Client #32
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-830"
		pipewire.sec.socket = "pipewire-0-manager"
		pipewire.sec.pid = "830"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "32"
		object.serial = "32"
		application.version = "0.5.10"
		wireplumber.daemon = "true"
		wireplumber.profile = "main"
		application.name = "WirePlumber"
		remote.name = "[pipewire-0-manager,pipewire-0]"
		config.name = "null"
		context.modules.allow-empty = "true"
		application.process.binary = "wireplumber"
		application.language = "pt_BR.UTF-8"
		application.process.id = "830"
		application.process.user = "volt"
		application.process.host = "bob"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"
		session.services = "[policy.linking.role-based, policy.linking.standard, video-capture, audio, policy.device.profile, api.libcamera, policy.device.routes, api.alsa-seq, bluetooth.audio, policy.default-nodes, midi, bluetooth.midi, api.v4l2, api.alsa, api.bluez]"

Client #33
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "33"
		object.serial = "33"
		config.name = "pipewire-pulse.conf"
		application.name = "pipewire"
		application.process.binary = "pipewire"
		application.language = "pt_BR.UTF-8"
		application.process.id = "832"
		application.process.user = "volt"
		application.process.host = "bob"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #46
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-830"
		pipewire.sec.socket = "pipewire-0-manager"
		pipewire.sec.pid = "830"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "46"
		object.serial = "46"
		application.name = "WirePlumber [export]"
		wireplumber.export-core = "true"
		application.version = "0.5.10"
		wireplumber.daemon = "true"
		wireplumber.profile = "main"
		remote.name = "[pipewire-0-manager,pipewire-0]"
		config.name = "null"
		context.modules.allow-empty = "true"
		application.process.binary = "wireplumber"
		application.language = "pt_BR.UTF-8"
		application.process.id = "830"
		application.process.user = "volt"
		application.process.host = "bob"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #67
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-898"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "898"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "62"
		object.serial = "67"
		application.name = "kwin_wayland"
		application.process.binary = "kwin_wayland"
		application.language = "pt_BR.UTF-8"
		application.process.id = "898"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.session_id = "2"
		log.level = "0"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #75
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "70"
		object.serial = "75"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "libcanberra"
		application.version = "0.30"
		application.id = "org.freedesktop.libcanberra"
		application.process.id = "1021"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "kded6"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #76
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "71"
		object.serial = "76"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = ""
		application.id = "org.kde.kded6"
		application.icon_name = ""
		application.process.id = "1021"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "kded6"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #77
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-908"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "908"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "72"
		object.serial = "77"
		pipewire.access.portal.is_portal = "true"
		portal.monitor = "Camera"
		application.name = "xdg-desktop-portal"
		application.process.binary = "xdg-desktop-portal"
		application.language = "pt_BR.UTF-8"
		application.process.id = "908"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.session_id = "2"
		window.x11.display = ":1"
		log.level = "0"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #80
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "75"
		object.serial = "80"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "Serviço do KDE Connect"
		application.id = "org.kde.kdeconnect.daemon"
		application.icon_name = ""
		application.process.id = "1211"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "kdeconnectd"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #87
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "80"
		object.serial = "87"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "Firefox"
		application.process.id = "1505"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "firefox"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #88
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "81"
		object.serial = "88"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.version = "140.0.4"
		application.name = "Firefox"
		application.icon_name = "firefox"
		application.process.id = "1505"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "firefox"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #234
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "91"
		object.serial = "234"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.icon_name = ""
		application.id = "org.kde.polkit-kde-authentication-agent-1"
		application.name = ""
		application.process.id = "1092"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "polkit-kde-authentication-agent-1"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #1900
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-73301"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "73301"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "78"
		object.serial = "1900"
		application.name = "plasmashell"
		application.process.binary = "plasmashell"
		application.language = "pt_BR.UTF-8"
		application.process.id = "73301"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.session_id = "2"
		window.x11.display = ":1"
		log.level = "0"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #1901
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "115"
		object.serial = "1901"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "libcanberra"
		application.version = "0.30"
		application.id = "org.freedesktop.libcanberra"
		application.process.id = "73301"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "plasmashell"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #1902
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "90"
		object.serial = "1902"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = ""
		application.id = "org.kde.plasma-pa"
		application.icon_name = ""
		application.process.id = "73301"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "plasmashell"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #1993
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "101"
		object.serial = "1993"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		pipewire.access.portal.app_id = "dev.vencord.Vesktop"
		media.category = "Manager"
		pipewire.client.access = "flatpak"
		application.name = "Chromium input"
		application.process.id = "140"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "vesktop.bin"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "flatpak"
		pipewire.access.effective = "flatpak-manager"

Client #2216
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "73"
		object.serial = "2216"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		pipewire.access.portal.app_id = "dev.vencord.Vesktop"
		media.category = "Manager"
		pipewire.client.access = "flatpak"
		application.name = "Chromium"
		application.process.id = "140"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "vesktop.bin"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "flatpak"
		pipewire.access.effective = "flatpak-manager"

Client #2272
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "99"
		object.serial = "2272"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "Configurações do sistema"
		application.id = "org.kde.plasma-pa"
		application.icon_name = "preferences-system"
		application.process.id = "96701"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "systemsettings"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Client #2456
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "199"
		object.serial = "2456"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		pipewire.access.portal.app_id = "com.rtosta.zapzap"
		media.category = "Manager"
		pipewire.client.access = "flatpak"
		application.name = "Chromium input"
		application.process.id = "108"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "QtWebEngineProcess"
		application.language = "pt_BR.UTF-8"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "flatpak"
		pipewire.access.effective = "flatpak-manager"

Client #2463
	Driver: PipeWire
	Owner Module: 2
	Properties:
		pipewire.protocol = "protocol-native"
		core.name = "pipewire-volt-832"
		pipewire.sec.socket = "pipewire-0"
		pipewire.sec.pid = "832"
		pipewire.sec.uid = "1000"
		pipewire.sec.gid = "1000"
		module.id = "2"
		object.id = "87"
		object.serial = "2463"
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.process.id = "99566"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "pactl"
		application.name = "pactl"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		config.name = "pipewire-pulse.conf"
		cpu.max-align = "32"
		default.clock.rate = "48000"
		default.clock.quantum = "1024"
		default.clock.min-quantum = "32"
		default.clock.max-quantum = "2048"
		default.clock.quantum-limit = "8192"
		default.clock.quantum-floor = "4"
		default.video.width = "640"
		default.video.height = "480"
		default.video.rate.num = "25"
		default.video.rate.denom = "1"
		log.level = "2"
		clock.power-of-two-quantum = "true"
		link.max-buffers = "64"
		mem.warn-mlock = "false"
		mem.allow-mlock = "true"
		settings.check-quantum = "false"
		settings.check-rate = "false"
		core.version = "1.4.6"
		pipewire.access = "unrestricted"

Sample #0
	Name: audio-volume-change
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	Duration: 0,3s
	Size: 56,4 KiB
	Lazy: no
	Filename: n/a
	Properties:
		client.api = "pipewire-pulse"
		pulse.server.type = "unix"
		application.name = "libcanberra"
		application.version = "0.30"
		application.id = "org.freedesktop.libcanberra"
		application.process.id = "96701"
		application.process.user = "volt"
		application.process.host = "bob"
		application.process.binary = "systemsettings"
		application.language = "pt_BR.UTF-8"
		window.x11.display = ":1"
		application.process.machine_id = "2152bb21ad4844df80aaedfe471f26fc"
		application.process.session_id = "2"
		media.role = "alert"
		event.id = "audio-volume-change"
		event.description = "Volume Control Feedback Sound"
		media.name = "audio-volume-change"
		media.filename = "/usr/share/sounds/ocean/stereo/audio-volume-change.oga"

Card #1797
	Name: alsa_card.pci-0000_30_00.1
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "1"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc508000 irq 76"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:1"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:30:00.1"
		device.description = "Renoir Radeon High Definition Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_30_00.1"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "5756359"
		device.product.id = "0x1637"
		device.product.name = "Renoir Radeon High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:30:00.1/sound/card1"
		device.vendor.id = "0x1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		media.class = "Audio/Device"
		spa.object.id = "4"
		factory.id = "15"
		client.id = "46"
		object.id = "69"
		object.serial = "1797"
		object.path = "alsa:acp:Generic"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfc508000 irq 76"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "ATI R6xx HDMI"
		alsa.components = "HDA:1002aa01,00aa0100,00100700"
		alsa.id = "Generic"
		device.string = "1"
	Profiles:
		off: Desligado (sinks: 0, sources: 0, priority: 0, available: yes)
		output:hdmi-stereo: Saída Estéreo digital (HDMI) (sinks: 1, sources: 0, priority: 5900, available: no)
		output:hdmi-stereo-extra1: Saída Digital Stereo (HDMI 2) (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra2: Saída Digital Stereo (HDMI 3) (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra3: Saída Digital Stereo (HDMI 4) (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra4: Saída Digital Stereo (HDMI 5) (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra5: Saída Digital Stereo (HDMI 6) (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround: Saída Surround digital 5.1 (HDMI) (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-surround71: Saída Digital Surround 7.1 (HDMI) (sinks: 1, sources: 0, priority: 800, available: no)
		output:hdmi-surround-extra1: Saída Digital Surround 5.1 (HDMI 2) (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra1: Saída Digital Surround 7.1 (HDMI 2) (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra2: Saída Digital Surround 5.1 (HDMI 3) (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Saída Digital Surround 7.1 (HDMI 3) (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra3: Saída Digital Surround 5.1 (HDMI 4) (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra3: Saída Digital Surround 7.1 (HDMI 4) (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra4: Saída Digital Surround 5.1 (HDMI 5) (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra4: Saída Digital Surround 7.1 (HDMI 5) (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra5: Saída Digital Surround 5.1 (HDMI 6) (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra5: Saída Digital Surround 7.1 (HDMI 6) (sinks: 1, sources: 0, priority: 600, available: no)
		pro-audio: Pro Audio (sinks: 6, sources: 0, priority: 1, available: yes)
	Active Profile: off
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 1"
				device.icon_name = "video-display"
				card.profile.port = "0"
			Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 2"
				device.icon_name = "video-display"
				card.profile.port = "1"
			Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 3"
				device.icon_name = "video-display"
				card.profile.port = "2"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 4"
				device.icon_name = "video-display"
				card.profile.port = "3"
			Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3
		hdmi-output-4: HDMI / DisplayPort 5 (type: HDMI, priority: 5500, latency offset: 0 usec, availability group: Legacy 5, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 5"
				device.icon_name = "video-display"
				card.profile.port = "4"
			Part of profile(s): output:hdmi-stereo-extra4, output:hdmi-surround-extra4, output:hdmi-surround71-extra4
		hdmi-output-5: HDMI / DisplayPort 6 (type: HDMI, priority: 5400, latency offset: 0 usec, availability group: Legacy 6, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 6"
				device.icon_name = "video-display"
				card.profile.port = "5"
			Part of profile(s): output:hdmi-stereo-extra5, output:hdmi-surround-extra5, output:hdmi-surround71-extra5

Card #1798
	Name: alsa_card.pci-0000_10_00.1
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.card.longname = "HDA NVidia at 0xfc080000 irq 74"
		api.alsa.card.name = "HDA NVidia"
		api.alsa.path = "hw:0"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:10:00.1"
		device.description = "HDA NVidia"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_10_00.1"
		device.nick = "HDA NVidia"
		device.plugged.usec = "5756247"
		device.product.id = "0x10fa"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.1/0000:10:00.1/sound/card0"
		device.vendor.id = "0x10de"
		device.vendor.name = "NVIDIA Corporation"
		media.class = "Audio/Device"
		spa.object.id = "2"
		factory.id = "15"
		client.id = "46"
		object.id = "54"
		object.serial = "1798"
		object.path = "alsa:acp:NVidia"
		alsa.card = "0"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xfc080000 irq 74"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Nvidia GPU 94 HDMI/DP"
		alsa.components = "HDA:10de0094,10de1363,00100100"
		alsa.id = "NVidia"
		device.string = "0"
	Profiles:
		off: Desligado (sinks: 0, sources: 0, priority: 0, available: yes)
		output:hdmi-stereo: Saída Estéreo digital (HDMI) (sinks: 1, sources: 0, priority: 5900, available: yes)
		output:hdmi-stereo-extra1: Saída Digital Stereo (HDMI 2) (sinks: 1, sources: 0, priority: 5700, available: yes)
		output:hdmi-stereo-extra2: Saída Digital Stereo (HDMI 3) (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra3: Saída Digital Stereo (HDMI 4) (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra2: Saída Digital Surround 5.1 (HDMI 3) (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Saída Digital Surround 7.1 (HDMI 3) (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra3: Saída Digital Surround 5.1 (HDMI 4) (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra3: Saída Digital Surround 7.1 (HDMI 4) (sinks: 1, sources: 0, priority: 600, available: no)
		pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
	Active Profile: output:hdmi-stereo
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 1"
				device.icon_name = "video-display"
				card.profile.port = "0"
				device.product.name = "PHILCO"
				iec958.codecs.detected = "[\"PCM\"]"
			Part of profile(s): output:hdmi-stereo
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 2"
				device.icon_name = "video-display"
				card.profile.port = "1"
				device.product.name = "LG FHD"
				iec958.codecs.detected = "[\"PCM\"]"
			Part of profile(s): output:hdmi-stereo-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 3"
				device.icon_name = "video-display"
				card.profile.port = "2"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 4"
				device.icon_name = "video-display"
				card.profile.port = "3"
			Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3

Card #1799
	Name: alsa_card.pci-0000_30_00.6
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "2"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc500000 irq 77"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:2"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:30:00.6"
		device.description = "Family 17h/19h/1ah HD Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_30_00.6"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "5848113"
		device.product.id = "0x15e3"
		device.product.name = "Family 17h/19h/1ah HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:30:00.6/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		media.class = "Audio/Device"
		spa.object.id = "6"
		factory.id = "15"
		client.id = "46"
		object.id = "59"
		object.serial = "1799"
		object.path = "alsa:acp:Generic_1"
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfc500000 irq 77"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Realtek ALC897"
		alsa.components = "HDA:10ec0897,1462ec56,00100402"
		alsa.id = "Generic_1"
		device.string = "2"
	Profiles:
		off: Desligado (sinks: 0, sources: 0, priority: 0, available: yes)
		output:analog-stereo+input:analog-stereo: Duplex estéreo analógico (sinks: 1, sources: 1, priority: 6565, available: yes)
		output:analog-stereo: Saída Estéreo analógico (sinks: 1, sources: 0, priority: 6500, available: yes)
		output:iec958-stereo+input:analog-stereo: Saída Estéreo digital (IEC958) + Entrada Estéreo analógico (sinks: 1, sources: 1, priority: 5565, available: yes)
		output:iec958-stereo: Saída Estéreo digital (IEC958) (sinks: 1, sources: 0, priority: 5500, available: yes)
		output:analog-surround-21+input:analog-stereo: Saída Surround analógico 2.1 + Entrada Estéreo analógico (sinks: 1, sources: 1, priority: 1365, available: yes)
		output:analog-surround-41+input:analog-stereo: Saída Surround analógico 4.1 + Entrada Estéreo analógico (sinks: 1, sources: 1, priority: 1365, available: yes)
		output:analog-surround-51+input:analog-stereo: Saída Surround analógico 5.1 + Entrada Estéreo analógico (sinks: 1, sources: 1, priority: 1365, available: yes)
		output:analog-surround-21: Saída Surround analógico 2.1 (sinks: 1, sources: 0, priority: 1300, available: yes)
		output:analog-surround-41: Saída Surround analógico 4.1 (sinks: 1, sources: 0, priority: 1300, available: yes)
		output:analog-surround-51: Saída Surround analógico 5.1 (sinks: 1, sources: 0, priority: 1300, available: yes)
		output:analog-surround-40+input:analog-stereo: Saída Surround analógico 4.0 + Entrada Estéreo analógico (sinks: 1, sources: 1, priority: 1265, available: yes)
		output:analog-surround-50+input:analog-stereo: Saída Surround analógico 5.0 + Entrada Estéreo analógico (sinks: 1, sources: 1, priority: 1265, available: yes)
		output:analog-surround-40: Saída Surround analógico 4.0 (sinks: 1, sources: 0, priority: 1200, available: yes)
		output:analog-surround-50: Saída Surround analógico 5.0 (sinks: 1, sources: 0, priority: 1200, available: yes)
		input:analog-stereo: Entrada Estéreo analógico (sinks: 0, sources: 1, priority: 65, available: yes)
		pro-audio: Pro Audio (sinks: 2, sources: 2, priority: 1, available: yes)
	Active Profile: output:analog-stereo
	Ports:
		analog-input-front-mic: Microfone frontal (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 1"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
		analog-input-rear-mic: Microfone traseiro (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 2"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "1"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
		analog-input-linein: Entrada de linha (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "line"
				port.availability-group = "Legacy 3"
				card.profile.port = "2"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21+input:analog-stereo, output:analog-surround-40+input:analog-stereo, output:analog-surround-41+input:analog-stereo, output:analog-surround-50+input:analog-stereo, output:analog-surround-51+input:analog-stereo, output:iec958-stereo+input:analog-stereo
		analog-output-lineout: Saída de linha (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, available)
			Properties:
				port.type = "line"
				port.availability-group = "Legacy 4"
				card.profile.port = "3"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-surround-21, output:analog-surround-21+input:analog-stereo, output:analog-surround-40, output:analog-surround-40+input:analog-stereo, output:analog-surround-41, output:analog-surround-41+input:analog-stereo, output:analog-surround-50, output:analog-surround-50+input:analog-stereo, output:analog-surround-51, output:analog-surround-51+input:analog-stereo
		analog-output-headphones: Fones de ouvido (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, available)
			Properties:
				port.type = "headphones"
				port.availability-group = "Legacy 5"
				device.icon_name = "audio-headphones"
				card.profile.port = "4"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		iec958-stereo-output: Saída digital (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "spdif"
				card.profile.port = "5"
			Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo

Card #1800
	Name: alsa_card.usb-Vimicro_Corp._Lenovo_FHD_Webcam_Lenovo_FHD_Webcam_Audio-02
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "3"
		api.alsa.card.longname = "Vimicro Corp. Lenovo FHD Webcam at usb-0000:16:00.0-10, high speed"
		api.alsa.card.name = "Lenovo FHD Webcam"
		api.alsa.path = "hw:3"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio3"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "usb"
		device.bus-id = "usb-Vimicro_Corp._Lenovo_FHD_Webcam_Lenovo_FHD_Webcam_Audio-02"
		device.bus_path = "pci-0000:16:00.0-usb-0:10:1.2"
		device.description = "Lenovo FHD Webcam"
		device.enum.api = "udev"
		device.form_factor = "webcam"
		device.icon_name = "camera-web-analog-usb"
		device.name = "alsa_card.usb-Vimicro_Corp._Lenovo_FHD_Webcam_Lenovo_FHD_Webcam_Audio-02"
		device.nick = "Lenovo FHD Webcam"
		device.plugged.usec = "5835065"
		device.product.id = "0x4831"
		device.product.name = "Lenovo FHD Webcam"
		device.serial = "Vimicro_Corp._Lenovo_FHD_Webcam_Lenovo_FHD_Webcam_Audio"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:16:00.0/usb1/1-10/1-10:1.2/sound/card3"
		device.vendor.id = "0x17ef"
		device.vendor.name = "Lenovo"
		media.class = "Audio/Device"
		spa.object.id = "8"
		factory.id = "15"
		client.id = "46"
		object.id = "45"
		object.serial = "1800"
		object.path = "alsa:acp:Webcam"
		alsa.card = "3"
		alsa.card_name = "Lenovo FHD Webcam"
		alsa.long_card_name = "Vimicro Corp. Lenovo FHD Webcam at usb-0000:16:00.0-10, high speed"
		alsa.driver_name = "snd_usb_audio"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB17ef:4831"
		alsa.id = "Webcam"
		device.string = "3"
	Profiles:
		off: Desligado (sinks: 0, sources: 0, priority: 0, available: yes)
		input:analog-stereo: Entrada Estéreo analógico (sinks: 0, sources: 1, priority: 65, available: yes)
		input:iec958-stereo: Entrada Estéreo digital (IEC958) (sinks: 0, sources: 1, priority: 55, available: yes)
		pro-audio: Pro Audio (sinks: 0, sources: 1, priority: 1, available: yes)
	Active Profile: input:iec958-stereo
	Ports:
		analog-input-mic: Microfone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "mic"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo
		iec958-stereo-input: Entrada digital (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "spdif"
				card.profile.port = "1"
			Part of profile(s): input:iec958-stereo

V1del · 2025-07-20 22:21:38

pactl set-card-profile alsa_card.pci-0000_30_00.6 output:analog-stereo+input:analog-stereo

Your internal card was configured to only expose the outputs (speakers/headphones) and not the microphone input. This command should reconfigure so that the mic of the internal card gets exposed to applications and this should get remembered once set.

VoltPleiar · 2025-07-21 01:58:50

Thank you V1del! Your solution worked! Have a wonderful day!

VoltPleiar · 2025-07-21 01:59:38

On a side note, how does on mark this as solved/closed?

V1del · 2025-07-21 13:28:26

Glad to hear,

You can edit the title in the first post you made and prepend [SOLVED] or so.

Arch Linux

#1 2025-07-19 00:16:02

Microphone doesn't work? [SOLVED]

#2 2025-07-19 00:26:58

Re: Microphone doesn't work? [SOLVED]

#3 2025-07-20 22:21:38

Re: Microphone doesn't work? [SOLVED]

#4 2025-07-21 01:58:50

Re: Microphone doesn't work? [SOLVED]

#5 2025-07-21 01:59:38

Re: Microphone doesn't work? [SOLVED]

#6 2025-07-21 13:28:26

Re: Microphone doesn't work? [SOLVED]

Board footer