Arch Linux

noxar_ad

Member

Registered: 2025-07-04

Posts: 8

[SOLVED] Screen tearing nvidia-470xx-dkms awesomewm

I am having terrible screen tearing on my laptop using 470xx-dkms driver

[noxar_ad@noxarad /]$ inxi -G
Graphics:
  Device-1: NVIDIA GK104GLM [Quadro K3000M] driver: nvidia
    v: 470.256.02
  Device-2: Pixart Imaging USB_2.0_Webcam driver: uvcvideo
    type: USB
  Display: x11 server: X.org v: 1.21.1.18 driver: X:
    loaded: modesetting gpu: nvidia resolution: 1600x900~60Hz
  API: EGL v: 1.5 drivers: nvidia,swrast
    platforms: x11,surfaceless,device
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: mesa
    v: 25.1.6-arch1.1 renderer: llvmpipe (LLVM 20.1.8 256 bits)
  Info: Tools: api: eglinfo,glxinfo gpu: nvidia-smi
    x11: xprop,xrandr

this is my dmesg output:

[noxar_ad@noxarad /]$ sudo dmesg
[sudo] password for noxar_ad: 
[    0.000000] Linux version 6.12.39-1-lts (linux-lts@archlinux) (gcc (GCC) 15.1.1 20250425, GNU ld (GNU Binutils) 2.44.0) #1 SMP PREEMPT_DYNAMIC Thu, 17 Jul 2025 19:01:26 +0000
[    0.000000] Command line: root=PARTUUID=92fda810-0527-47f3-a446-bf0103cc2751 zswap.enabled=0 rw rootfstype=btrfs
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bd8fefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd8ff000-0x00000000bec7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bec7f000-0x00000000bef4afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bef4b000-0x00000000bef7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bef7f000-0x00000000beffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffee0000-0x00000000ffefefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000033dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] e820: update [mem 0xbece5018-0xbecfae57] usable ==> usable
[    0.000000] e820: update [mem 0xbecdc018-0xbece4e57] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000bd8fefff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bd8ff000-0x00000000bec7efff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000bec7f000-0x00000000becdc017] usable
[    0.000000] reserve setup_data: [mem 0x00000000becdc018-0x00000000bece4e57] usable
[    0.000000] reserve setup_data: [mem 0x00000000bece4e58-0x00000000bece5017] usable
[    0.000000] reserve setup_data: [mem 0x00000000bece5018-0x00000000becfae57] usable
[    0.000000] reserve setup_data: [mem 0x00000000becfae58-0x00000000bef4afff] usable
[    0.000000] reserve setup_data: [mem 0x00000000bef4b000-0x00000000bef7efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000bef7f000-0x00000000beffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000befff000-0x00000000beffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffee0000-0x00000000ffefefff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000033dffffff] usable
[    0.000000] efi: EFI v2.1 by HPQ
[    0.000000] efi: ACPI=0xbeffe000 ACPI 2.0=0xbeffe014 SMBIOS=0xbe2ae818 RNG=0xbefc7f98 INITRD=0xbecfed98 
[    0.000000] random: crng init done
[    0.000000] efi: Not removing mem57: MMIO range=[0xe00f8000-0xe00f8fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem58: MMIO range=[0xfed1c000-0xfed1ffff] (16KB) from e820 map
[    0.000000] efi: Not removing mem59: MMIO range=[0xffee0000-0xffefefff] (124KB) from e820 map
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP EliteBook 8770w/176C, BIOS 68IAV Ver. F.42 07/15/2013
[    0.000000] DMI: Memory slots populated: 4/4
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2693.792 MHz processor
[    0.000010] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000013] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000020] last_pfn = 0x33e000 max_arch_pfn = 0x400000000
[    0.000028] MTRR map: 7 entries (3 fixed + 4 variable; max 23), built from 10 variable MTRRs
[    0.000030] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000299] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.011811] Secure boot disabled
[    0.011812] RAMDISK: [mem 0xa28c2000-0xa5c49fff]
[    0.011942] ACPI: Early table checksum verification disabled
[    0.011945] ACPI: RSDP 0x00000000BEFFE014 000024 (v02 HPQOEM)
[    0.011950] ACPI: XSDT 0x00000000BEFFE120 00009C (v01 HPQOEM SLIC-MPC 0000000F      01000013)
[    0.011957] ACPI: FACP 0x00000000BEFFC000 00010C (v05 HPQOEM 176C     0000000F HP   00000001)
[    0.011963] ACPI: DSDT 0x00000000BEFD6000 020720 (v02 HPQOEM 176C     00000001 INTL 20110112)
[    0.011967] ACPI: FACS 0x00000000BEC34000 000040
[    0.011970] ACPI: FACS 0x00000000BEC34000 000040
[    0.011973] ACPI: HPET 0x00000000BEFFB000 000038 (v01 HPQOEM 176C     00000001 HP   00000001)
[    0.011977] ACPI: APIC 0x00000000BEFFA000 0000BC (v01 HPQOEM 176C     00000001 HP   00000001)
[    0.011980] ACPI: MCFG 0x00000000BEFF9000 00003C (v01 HPQOEM 176C     00000001 HP   00000001)
[    0.011984] ACPI: TCPA 0x00000000BEFF7000 000032 (v02 HPQOEM 176C     00000000 HP   00000001)
[    0.011987] ACPI: SSDT 0x00000000BEFD3000 0002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[    0.011991] ACPI: SSDT 0x00000000BEFD2000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[    0.011995] ACPI: SLIC 0x00000000BEFD1000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.011998] ACPI: FPDT 0x00000000BEFCF000 000044 (v01 HPQOEM 176C     00000001 HP   00000001)
[    0.012001] ACPI: BGRT 0x00000000BEFCE000 000038 (v00 HPQOEM 176C     00000001 HP   00000001)
[    0.012005] ACPI: SSDT 0x00000000BEFCB000 0019EF (v01 HPQOEM NVIDIAGF 00000001 INTL 20110112)
[    0.012009] ACPI: SSDT 0x00000000BEFCA000 0009B6 (v01 PmRef  Cpu0Ist  00003000 INTL 20110112)
[    0.012012] ACPI: SSDT 0x00000000BEFC9000 000AAD (v01 PmRef  CpuPm    00003000 INTL 20110112)
[    0.012016] ACPI: DMAR 0x00000000BEFC8000 000080 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.012019] ACPI: ASF! 0x00000000BEFF8000 0000A5 (v32 HPQOEM 176C     00000001 HP   00000001)
[    0.012022] ACPI: Reserving FACP table memory at [mem 0xbeffc000-0xbeffc10b]
[    0.012024] ACPI: Reserving DSDT table memory at [mem 0xbefd6000-0xbeff671f]
[    0.012025] ACPI: Reserving FACS table memory at [mem 0xbec34000-0xbec3403f]
[    0.012026] ACPI: Reserving FACS table memory at [mem 0xbec34000-0xbec3403f]
[    0.012027] ACPI: Reserving HPET table memory at [mem 0xbeffb000-0xbeffb037]
[    0.012028] ACPI: Reserving APIC table memory at [mem 0xbeffa000-0xbeffa0bb]
[    0.012029] ACPI: Reserving MCFG table memory at [mem 0xbeff9000-0xbeff903b]
[    0.012030] ACPI: Reserving TCPA table memory at [mem 0xbeff7000-0xbeff7031]
[    0.012031] ACPI: Reserving SSDT table memory at [mem 0xbefd3000-0xbefd32c9]
[    0.012032] ACPI: Reserving SSDT table memory at [mem 0xbefd2000-0xbefd2489]
[    0.012032] ACPI: Reserving SLIC table memory at [mem 0xbefd1000-0xbefd1175]
[    0.012033] ACPI: Reserving FPDT table memory at [mem 0xbefcf000-0xbefcf043]
[    0.012034] ACPI: Reserving BGRT table memory at [mem 0xbefce000-0xbefce037]
[    0.012035] ACPI: Reserving SSDT table memory at [mem 0xbefcb000-0xbefcc9ee]
[    0.012036] ACPI: Reserving SSDT table memory at [mem 0xbefca000-0xbefca9b5]
[    0.012037] ACPI: Reserving SSDT table memory at [mem 0xbefc9000-0xbefc9aac]
[    0.012038] ACPI: Reserving DMAR table memory at [mem 0xbefc8000-0xbefc807f]
[    0.012039] ACPI: Reserving ASF! table memory at [mem 0xbeff8000-0xbeff80a4]
[    0.012099] No NUMA configuration found
[    0.012100] Faking a node at [mem 0x0000000000000000-0x000000033dffffff]
[    0.012111] NODE_DATA(0) allocated [mem 0x33dfd22c0-0x33dffcfff]
[    0.012402] Zone ranges:
[    0.012403]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012405]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.012406]   Normal   [mem 0x0000000100000000-0x000000033dffffff]
[    0.012408]   Device   empty
[    0.012409] Movable zone start for each node
[    0.012412] Early memory node ranges
[    0.012412]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.012414]   node   0: [mem 0x0000000000100000-0x00000000bd8fefff]
[    0.012415]   node   0: [mem 0x00000000bec7f000-0x00000000bef4afff]
[    0.012416]   node   0: [mem 0x00000000befff000-0x00000000beffffff]
[    0.012417]   node   0: [mem 0x0000000100000000-0x000000033dffffff]
[    0.012420] Initmem setup node 0 [mem 0x0000000000001000-0x000000033dffffff]
[    0.012426] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.012449] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.017910] On node 0, zone DMA32: 4992 pages in unavailable ranges
[    0.017917] On node 0, zone DMA32: 180 pages in unavailable ranges
[    0.034729] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.034841] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.035158] ACPI: PM-Timer IO Port: 0x408
[    0.035170] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.035172] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.035173] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.035174] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.035174] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.035175] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.035176] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.035177] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.035189] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.035192] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.035195] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.035199] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.035201] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.035212] e820: update [mem 0xba1c1000-0xba1cefff] usable ==> reserved
[    0.035224] TSC deadline timer available
[    0.035230] CPU topo: Max. logical packages:   1
[    0.035231] CPU topo: Max. logical dies:       1
[    0.035231] CPU topo: Max. dies per package:   1
[    0.035237] CPU topo: Max. threads per core:   2
[    0.035238] CPU topo: Num. cores per package:     4
[    0.035239] CPU topo: Num. threads per package:   8
[    0.035239] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
[    0.035253] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.035256] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x000fffff]
[    0.035258] PM: hibernation: Registered nosave memory: [mem 0xba1c1000-0xba1cefff]
[    0.035259] PM: hibernation: Registered nosave memory: [mem 0xbd8ff000-0xbec7efff]
[    0.035261] PM: hibernation: Registered nosave memory: [mem 0xbef4b000-0xbeffefff]
[    0.035263] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xffffffff]
[    0.035265] [mem 0xbf000000-0xe00f7fff] available for PCI devices
[    0.035266] Booting paravirtualized kernel on bare hardware
[    0.035269] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.042188] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.042764] percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u524288
[    0.042771] pcpu-alloc: s237568 r8192 d28672 u524288 alloc=1*2097152
[    0.042774] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
[    0.042795] Kernel command line: root=PARTUUID=92fda810-0527-47f3-a446-bf0103cc2751 zswap.enabled=0 rw rootfstype=btrfs
[    0.044692] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.045647] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.045785] Fallback order for Node 0: 0 
[    0.045790] Built 1 zonelists, mobility grouping on.  Total pages: 3128168
[    0.045791] Policy zone: Normal
[    0.046068] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.046079] software IO TLB: area num 8.
[    0.096555] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.096589] Kernel/User page tables isolation: enabled
[    0.096633] ftrace: allocating 51453 entries in 201 pages
[    0.106235] ftrace: allocated 201 pages with 4 groups
[    0.107063] Dynamic Preempt: voluntary
[    0.107129] rcu: Preemptible hierarchical RCU implementation.
[    0.107130] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.107131] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.107132] 	Trampoline variant of Tasks RCU enabled.
[    0.107133] 	Rude variant of Tasks RCU enabled.
[    0.107133] 	Tracing variant of Tasks RCU enabled.
[    0.107134] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.107135] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.107147] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.107149] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.107151] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.113486] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.113698] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.113857] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.113900] Console: colour dummy device 80x25
[    0.113903] printk: legacy console [tty0] enabled
[    0.113958] ACPI: Core revision 20240827
[    0.114119] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.114137] APIC: Switch to symmetric I/O mode setup
[    0.114139] DMAR: Host address width 36
[    0.114141] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.114147] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.114149] DMAR: RMRR base: 0x000000bec0f000 end: 0x000000bec2efff
[    0.114153] DMAR-IR: IOAPIC id 0 under DRHD base  0xfed90000 IOMMU 0
[    0.114155] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.114156] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.114465] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.114467] x2apic enabled
[    0.114530] APIC: Switched APIC routing to: cluster x2apic
[    0.114959] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.130805] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d455da687, max_idle_ns: 440795265171 ns
[    0.130810] Calibrating delay loop (skipped), value calculated using timer frequency.. 5389.06 BogoMIPS (lpj=8979306)
[    0.130839] CPU0: Thermal monitoring enabled (TM1)
[    0.130868] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.130870] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.130874] process: using mwait in idle threads
[    0.130876] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.130879] Spectre V2 : Mitigation: Retpolines
[    0.130880] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.130881] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.130883] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.130884] Spectre V2 : User space: Mitigation: STIBP via prctl
[    0.130886] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.130888] MDS: Mitigation: Clear CPU buffers
[    0.130889] MMIO Stale Data: Unknown: No mitigations
[    0.130890] SRBDS: Vulnerable: No microcode
[    0.130896] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.130897] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.130899] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.130900] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.130902] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.156064] Freeing SMP alternatives memory: 40K
[    0.156073] pid_max: default: 32768 minimum: 301
[    0.171970] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
[    0.172055] landlock: Up and running.
[    0.172058] Yama: becoming mindful.
[    0.172257] LSM support for eBPF active
[    0.172305] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.172324] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.174235] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.174558] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.174578] ... version:                3
[    0.174579] ... bit width:              48
[    0.174580] ... generic registers:      4
[    0.174581] ... value mask:             0000ffffffffffff
[    0.174582] ... max period:             00007fffffffffff
[    0.174583] ... fixed-purpose events:   3
[    0.174584] ... event mask:             000000070000000f
[    0.174753] signal: max sigframe size: 1776
[    0.174773] Estimated ratio of average max frequency by base frequency (times 1024): 1327
[    0.174819] rcu: Hierarchical SRCU implementation.
[    0.174820] rcu: 	Max phase no-delay instances is 1000.
[    0.174894] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.175556] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.175645] smp: Bringing up secondary CPUs ...
[    0.175780] smpboot: x86: Booting SMP configuration:
[    0.175781] .... node  #0, CPUs:      #2 #4 #6 #1 #3 #5 #7
[    0.184307] Transient Scheduler Attacks: MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.189477] smp: Brought up 1 node, 8 CPUs
[    0.189477] smpboot: Total of 8 processors activated (43117.53 BogoMIPS)
[    0.190895] Memory: 12098740K/12512672K available (18432K kernel code, 2673K rwdata, 14356K rodata, 4288K init, 4272K bss, 397080K reserved, 0K cma-reserved)
[    0.191274] devtmpfs: initialized
[    0.191274] x86/mm: Memory block size: 128MB
[    0.191962] ACPI: PM: Registering ACPI NVS region [mem 0xbef4b000-0xbef7efff] (212992 bytes)
[    0.191962] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.191962] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.191962] pinctrl core: initialized pinctrl subsystem
[    0.191962] PM: RTC time: 13:53:51, date: 2025-07-20
[    0.191962] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.191962] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.191962] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.192091] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.192113] audit: initializing netlink subsys (disabled)
[    0.192138] audit: type=2000 audit(1753019631.000:1): state=initialized audit_enabled=0 res=1
[    0.192138] thermal_sys: Registered thermal governor 'fair_share'
[    0.192138] thermal_sys: Registered thermal governor 'bang_bang'
[    0.192138] thermal_sys: Registered thermal governor 'step_wise'
[    0.192138] thermal_sys: Registered thermal governor 'user_space'
[    0.192138] thermal_sys: Registered thermal governor 'power_allocator'
[    0.192138] cpuidle: using governor ladder
[    0.192138] cpuidle: using governor menu
[    0.194161] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.194164] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.194260] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[    0.194267] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved)
[    0.194269] PCI: Using configuration type 1 for base access
[    0.194320] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.194401] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.197724] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.197728] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.198413] ACPI: Added _OSI(Module Device)
[    0.198416] ACPI: Added _OSI(Processor Device)
[    0.198418] ACPI: Added _OSI(Processor Aggregator Device)
[    0.217296] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.218542] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.233318] ACPI: Dynamic OEM Table Load:
[    0.233318] ACPI: SSDT 0xFFFF8C6580C58000 000861 (v01 PmRef  Cpu0Cst  00003001 INTL 20110112)
[    0.233318] ACPI: Dynamic OEM Table Load:
[    0.233318] ACPI: SSDT 0xFFFF8C6580C60800 000303 (v01 PmRef  ApIst    00003000 INTL 20110112)
[    0.233318] ACPI: Dynamic OEM Table Load:
[    0.233318] ACPI: SSDT 0xFFFF8C6581F08E00 000119 (v01 PmRef  ApCst    00003000 INTL 20110112)
[    0.233896] ACPI: EC: EC started
[    0.233898] ACPI: EC: interrupt blocked
[    2.104983] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    2.104987] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    2.104989] ACPI: Interpreter enabled
[    2.105014] ACPI: PM: (supports S0 S3 S4 S5)
[    2.105016] ACPI: Using IOAPIC for interrupt routing
[    2.105669] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
[    2.106005] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[    2.106019] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    2.106021] PCI: Using E820 reservations for host bridge windows
[    2.106304] ACPI: Enabled 7 GPEs in block 00 to 3F
[    2.108963] ACPI: \_SB_.PCI0.HDEF.APPR: New power resource
[    2.112320] ACPI: \_SB_.PCI0.LPCB.SIO_.COM1.COMP: New power resource
[    2.113181] ACPI: \_SB_.PCI0.LPCB.SIO_.LPT0.LPP_: New power resource
[    2.117155] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    2.117163] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    2.117779] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
[    2.119313] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    2.119315] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    2.119957] PCI host bridge to bus 0000:00
[    2.119962] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    2.119965] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    2.119966] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    2.119968] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    2.119970] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
[    2.119971] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[    2.119973] pci_bus 0000:00: root bus resource [bus 00-3e]
[    2.119987] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 conventional PCI endpoint
[    2.120067] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 PCIe Root Port
[    2.120079] pci 0000:00:01.0: PCI bridge to [bus 01]
[    2.120082] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    2.120085] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xd90fffff]
[    2.120090] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    2.120121] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    2.120237] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 conventional PCI endpoint
[    2.120256] pci 0000:00:14.0: BAR 0 [mem 0xd9520000-0xd952ffff 64bit]
[    2.120323] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    2.120411] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 conventional PCI endpoint
[    2.120432] pci 0000:00:16.0: BAR 0 [mem 0xd9535000-0xd953500f 64bit]
[    2.120514] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    2.120570] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002 conventional PCI endpoint
[    2.120585] pci 0000:00:16.3: BAR 0 [io  0x6070-0x6077]
[    2.120593] pci 0000:00:16.3: BAR 1 [mem 0xd953c000-0xd953cfff]
[    2.120714] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 conventional PCI endpoint
[    2.120729] pci 0000:00:19.0: BAR 0 [mem 0xd9500000-0xd951ffff]
[    2.120737] pci 0000:00:19.0: BAR 1 [mem 0xd953b000-0xd953bfff]
[    2.120745] pci 0000:00:19.0: BAR 2 [io  0x6040-0x605f]
[    2.120811] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    2.120894] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 conventional PCI endpoint
[    2.120909] pci 0000:00:1a.0: BAR 0 [mem 0xd953a000-0xd953a3ff]
[    2.120988] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    2.121078] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[    2.121095] pci 0000:00:1b.0: BAR 0 [mem 0xd9530000-0xd9533fff 64bit]
[    2.121173] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    2.121278] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 PCIe Root Port
[    2.121302] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    2.121310] pci 0000:00:1c.0:   bridge window [mem 0xd9400000-0xd94fffff]
[    2.121389] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    2.121489] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 PCIe Root Port
[    2.121513] pci 0000:00:1c.1: PCI bridge to [bus 03-23]
[    2.121519] pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
[    2.121523] pci 0000:00:1c.1:   bridge window [mem 0xd4000000-0xd7ffffff]
[    2.121604] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    2.121713] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 PCIe Root Port
[    2.121743] pci 0000:00:1c.2: PCI bridge to [bus 24]
[    2.121749] pci 0000:00:1c.2:   bridge window [mem 0xd9300000-0xd93fffff]
[    2.121828] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    2.121932] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 PCIe Root Port
[    2.121962] pci 0000:00:1c.3: PCI bridge to [bus 25]
[    2.121969] pci 0000:00:1c.3:   bridge window [mem 0xd9200000-0xd92fffff]
[    2.122048] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    2.122148] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 PCIe Root Port
[    2.122178] pci 0000:00:1c.4: PCI bridge to [bus 26]
[    2.122183] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    2.122187] pci 0000:00:1c.4:   bridge window [mem 0xd9100000-0xd91fffff]
[    2.122266] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    2.122366] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 conventional PCI endpoint
[    2.122380] pci 0000:00:1d.0: BAR 0 [mem 0xd9539000-0xd95393ff]
[    2.122460] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    2.122555] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 conventional PCI endpoint
[    2.122764] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 conventional PCI endpoint
[    2.122778] pci 0000:00:1f.2: BAR 0 [io  0x6068-0x606f]
[    2.122786] pci 0000:00:1f.2: BAR 1 [io  0x607c-0x607f]
[    2.122794] pci 0000:00:1f.2: BAR 2 [io  0x6060-0x6067]
[    2.122802] pci 0000:00:1f.2: BAR 3 [io  0x6078-0x607b]
[    2.122809] pci 0000:00:1f.2: BAR 4 [io  0x6020-0x603f]
[    2.122817] pci 0000:00:1f.2: BAR 5 [mem 0xd9538000-0xd95387ff]
[    2.122865] pci 0000:00:1f.2: PME# supported from D3hot
[    2.122942] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 conventional PCI endpoint
[    2.122958] pci 0000:00:1f.3: BAR 0 [mem 0xd9534000-0xd95340ff 64bit]
[    2.122974] pci 0000:00:1f.3: BAR 4 [io  0xef80-0xef9f]
[    2.123093] pci 0000:01:00.0: [10de:11be] type 00 class 0x030000 PCIe Endpoint
[    2.123105] pci 0000:01:00.0: BAR 0 [mem 0xd8000000-0xd8ffffff]
[    2.123115] pci 0000:01:00.0: BAR 1 [mem 0xc0000000-0xcfffffff 64bit pref]
[    2.123125] pci 0000:01:00.0: BAR 3 [mem 0xd0000000-0xd1ffffff 64bit pref]
[    2.123132] pci 0000:01:00.0: BAR 5 [io  0x5000-0x507f]
[    2.123138] pci 0000:01:00.0: ROM [mem 0xfff80000-0xffffffff pref]
[    2.123167] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    2.123227] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[    2.124318] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300 PCIe Endpoint
[    2.124329] pci 0000:01:00.1: BAR 0 [mem 0xd9000000-0xd9003fff]
[    2.124457] pci 0000:00:01.0: PCI bridge to [bus 01]
[    2.124502] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    2.124606] pci 0000:00:1c.1: PCI bridge to [bus 03-23]
[    2.124736] pci 0000:24:00.0: [197b:2380] type 00 class 0x0c0010 PCIe Endpoint
[    2.124780] pci 0000:24:00.0: BAR 0 [mem 0xd9300000-0xd93007ff]
[    2.124803] pci 0000:24:00.0: BAR 1 [mem 0xd9305000-0xd93050ff]
[    2.125231] pci 0000:24:00.1: [197b:2392] type 00 class 0x088000 PCIe Endpoint
[    2.125263] pci 0000:24:00.1: BAR 0 [mem 0xd9304000-0xd93040ff]
[    2.125345] pci 0000:24:00.1: ROM [mem 0xffff8000-0xffffffff pref]
[    2.125634] pci 0000:24:00.2: [197b:2391] type 00 class 0x080501 PCIe Endpoint
[    2.125665] pci 0000:24:00.2: BAR 0 [mem 0xd9303000-0xd93030ff]
[    2.126092] pci 0000:00:1c.2: PCI bridge to [bus 24]
[    2.126366] pci 0000:25:00.0: [8086:422b] type 00 class 0x028000 PCIe Endpoint
[    2.126524] pci 0000:25:00.0: BAR 0 [mem 0xd9200000-0xd9201fff 64bit]
[    2.127304] pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
[    2.128156] pci 0000:00:1c.3: PCI bridge to [bus 25]
[    2.128257] pci 0000:26:00.0: [197b:2360] type 00 class 0x010601 PCIe Legacy Endpoint
[    2.128288] pci 0000:26:00.0: BAR 0 [io  0x2018-0x201f]
[    2.128302] pci 0000:26:00.0: BAR 1 [io  0x2024-0x2027]
[    2.128316] pci 0000:26:00.0: BAR 2 [io  0x2010-0x2017]
[    2.128330] pci 0000:26:00.0: BAR 3 [io  0x2020-0x2023]
[    2.128344] pci 0000:26:00.0: BAR 4 [io  0x2000-0x200f]
[    2.128357] pci 0000:26:00.0: BAR 5 [mem 0xd9100000-0xd91001ff]
[    2.128371] pci 0000:26:00.0: ROM [mem 0xffff0000-0xffffffff pref]
[    2.128494] pci 0000:26:00.0: PME# supported from D3hot
[    2.128630] pci 0000:00:1c.4: PCI bridge to [bus 26]
[    2.130067] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    2.130070] ACPI: PCI: Interrupt link LNKA disabled
[    2.130126] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    2.130128] ACPI: PCI: Interrupt link LNKB disabled
[    2.130183] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    2.130185] ACPI: PCI: Interrupt link LNKC disabled
[    2.130241] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    2.130243] ACPI: PCI: Interrupt link LNKD disabled
[    2.130297] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    2.130299] ACPI: PCI: Interrupt link LNKE disabled
[    2.130353] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    2.130355] ACPI: PCI: Interrupt link LNKF disabled
[    2.130410] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    2.130411] ACPI: PCI: Interrupt link LNKG disabled
[    2.130466] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    2.130467] ACPI: PCI: Interrupt link LNKH disabled
[    2.130965] ACPI: EC: interrupt unblocked
[    2.130967] ACPI: EC: event unblocked
[    2.130970] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    2.130971] ACPI: EC: GPE=0x16
[    2.130973] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[    2.130975] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[    2.134163] iommu: Default domain type: Translated
[    2.134163] iommu: DMA domain TLB invalidation policy: lazy mode
[    2.134310] SCSI subsystem initialized
[    2.134319] libata version 3.00 loaded.
[    2.134319] ACPI: bus type USB registered
[    2.134319] usbcore: registered new interface driver usbfs
[    2.134319] usbcore: registered new interface driver hub
[    2.134319] usbcore: registered new device driver usb
[    2.134319] EDAC MC: Ver: 3.0.0
[    2.134345] efivars: Registered efivars operations
[    2.134369] NetLabel: Initializing
[    2.134371] NetLabel:  domain hash size = 128
[    2.134373] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    2.134389] NetLabel:  unlabeled traffic allowed by default
[    2.134394] mctp: management component transport protocol core
[    2.134395] NET: Registered PF_MCTP protocol family
[    2.134400] PCI: Using ACPI for IRQ routing
[    2.140934] PCI: pci_cache_line_size set to 64 bytes
[    2.141058] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    2.141072] e820: reserve RAM buffer [mem 0xba1c1000-0xbbffffff]
[    2.141074] e820: reserve RAM buffer [mem 0xbd8ff000-0xbfffffff]
[    2.141076] e820: reserve RAM buffer [mem 0xbecdc018-0xbfffffff]
[    2.141077] e820: reserve RAM buffer [mem 0xbece5018-0xbfffffff]
[    2.141078] e820: reserve RAM buffer [mem 0xbef4b000-0xbfffffff]
[    2.141080] e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
[    2.141081] e820: reserve RAM buffer [mem 0x33e000000-0x33fffffff]
[    2.141116] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    2.141116] pci 0000:01:00.0: vgaarb: bridge control possible
[    2.141116] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    2.141116] vgaarb: loaded
[    2.141116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    2.141116] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    2.142905] clocksource: Switched to clocksource tsc-early
[    2.143070] VFS: Disk quotas dquot_6.6.0
[    2.143070] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.143070] pnp: PnP ACPI init
[    2.143070] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    2.143070] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    2.143070] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    2.143070] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    2.143070] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
[    2.143070] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    2.143070] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
[    2.143070] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    2.143070] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    2.143070] system 00:02: [io  0x0200-0x027f] has been reserved
[    2.143070] system 00:02: [io  0x1000-0x100f] has been reserved
[    2.143070] system 00:02: [io  0xffff] has been reserved
[    2.143070] system 00:02: [io  0xffff] has been reserved
[    2.143070] system 00:02: [io  0x0400-0x047f] has been reserved
[    2.143070] system 00:02: [io  0x0500-0x057f] has been reserved
[    2.143070] system 00:02: [io  0xef80-0xef9f] has been reserved
[    2.143070] pnp 00:05: [dma 0 disabled]
[    2.143468] pnp: PnP ACPI: found 8 devices
[    2.149457] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    2.149519] NET: Registered PF_INET protocol family
[    2.149664] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    2.166539] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    2.166575] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.166650] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    2.166926] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    2.167208] TCP: Hash tables configured (established 131072 bind 65536)
[    2.167296] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    2.167355] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    2.167406] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    2.167478] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.167489] NET: Registered PF_XDP protocol family
[    2.167495] pci 0000:24:00.1: ROM [mem 0xffff8000-0xffffffff pref]: can't claim; no compatible bridge window
[    2.167499] pci 0000:26:00.0: ROM [mem 0xffff0000-0xffffffff pref]: can't claim; no compatible bridge window
[    2.167504] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-23] add_size 200000 add_align 100000
[    2.167517] pci 0000:00:1c.1: bridge window [mem 0xd2000000-0xd21fffff 64bit pref]: assigned
[    2.167521] pci 0000:00:01.0: PCI bridge to [bus 01]
[    2.167524] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    2.167527] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xd90fffff]
[    2.167530] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    2.167533] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    2.167538] pci 0000:00:1c.0:   bridge window [mem 0xd9400000-0xd94fffff]
[    2.167546] pci 0000:00:1c.1: PCI bridge to [bus 03-23]
[    2.167549] pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
[    2.167554] pci 0000:00:1c.1:   bridge window [mem 0xd4000000-0xd7ffffff]
[    2.167558] pci 0000:00:1c.1:   bridge window [mem 0xd2000000-0xd21fffff 64bit pref]
[    2.167566] pci 0000:24:00.1: ROM [mem 0xd9308000-0xd930ffff pref]: assigned
[    2.167569] pci 0000:00:1c.2: PCI bridge to [bus 24]
[    2.167574] pci 0000:00:1c.2:   bridge window [mem 0xd9300000-0xd93fffff]
[    2.167582] pci 0000:00:1c.3: PCI bridge to [bus 25]
[    2.167587] pci 0000:00:1c.3:   bridge window [mem 0xd9200000-0xd92fffff]
[    2.167596] pci 0000:26:00.0: ROM [mem 0xd9110000-0xd911ffff pref]: assigned
[    2.167597] pci 0000:00:1c.4: PCI bridge to [bus 26]
[    2.167600] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    2.167605] pci 0000:00:1c.4:   bridge window [mem 0xd9100000-0xd91fffff]
[    2.167614] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    2.167616] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    2.167618] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    2.167619] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff window]
[    2.167621] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
[    2.167622] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
[    2.167624] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    2.167625] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd90fffff]
[    2.167627] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    2.167629] pci_bus 0000:02: resource 1 [mem 0xd9400000-0xd94fffff]
[    2.167630] pci_bus 0000:03: resource 0 [io  0x3000-0x4fff]
[    2.167632] pci_bus 0000:03: resource 1 [mem 0xd4000000-0xd7ffffff]
[    2.167633] pci_bus 0000:03: resource 2 [mem 0xd2000000-0xd21fffff 64bit pref]
[    2.167635] pci_bus 0000:24: resource 1 [mem 0xd9300000-0xd93fffff]
[    2.167636] pci_bus 0000:25: resource 1 [mem 0xd9200000-0xd92fffff]
[    2.167638] pci_bus 0000:26: resource 0 [io  0x2000-0x2fff]
[    2.167639] pci_bus 0000:26: resource 1 [mem 0xd9100000-0xd91fffff]
[    2.167745] pci 0000:00:14.0: enabling device (0000 -> 0002)
[    2.167904] pci 0000:00:14.0: can't derive routing for PCI INT A
[    2.167906] pci 0000:00:14.0: PCI INT A: not connected
[    2.167963] pci 0000:00:1a.0: enabling device (0000 -> 0002)
[    2.168281] pci 0000:00:1d.0: enabling device (0000 -> 0002)
[    2.168568] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[    2.168601] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    2.168655] PCI: CLS 64 bytes, default 64
[    2.168682] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.168683] software IO TLB: mapped [mem 0x00000000a9ec6000-0x00000000adec6000] (64MB)
[    2.168731] Trying to unpack rootfs image as initramfs...
[    2.193824] Initialise system trusted keyrings
[    2.193838] Key type blacklist registered
[    2.194032] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    2.194183] fuse: init (API version 7.41)
[    2.194288] integrity: Platform Keyring initialized
[    2.194291] integrity: Machine keyring initialized
[    2.208101] Key type asymmetric registered
[    2.208105] Asymmetric key parser 'x509' registered
[    2.208134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    2.208197] io scheduler mq-deadline registered
[    2.208199] io scheduler kyber registered
[    2.208212] io scheduler bfq registered
[    2.208879] ledtrig-cpu: registered to indicate activity on CPUs
[    2.209173] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[    2.209244] pcieport 0000:00:1c.0: enabling device (0000 -> 0002)
[    2.209459] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[    2.209514] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[    2.209709] pcieport 0000:00:1c.1: PME: Signaling with IRQ 26
[    2.209734] pcieport 0000:00:1c.1: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    2.210062] pcieport 0000:00:1c.2: PME: Signaling with IRQ 27
[    2.210329] pcieport 0000:00:1c.3: PME: Signaling with IRQ 28
[    2.210574] pcieport 0000:00:1c.4: PME: Signaling with IRQ 29
[    2.210663] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.211659] ACPI: AC: AC Adapter [AC] (on-line)
[    2.211721] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    2.211745] ACPI: button: Sleep Button [SLPB]
[    2.211773] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.211790] ACPI: button: Lid Switch [LID]
[    2.211816] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.211897] ACPI: button: Power Button [PWRF]
[    2.240430] thermal LNXTHERM:00: registered as thermal_zone0
[    2.240436] ACPI: thermal: Thermal Zone [CPUZ] (55 C)
[    2.252176] Freeing initrd memory: 52768K
[    2.264381] thermal LNXTHERM:01: registered as thermal_zone1
[    2.264388] ACPI: thermal: Thermal Zone [GFXZ] (59 C)
[    2.279321] thermal LNXTHERM:02: registered as thermal_zone2
[    2.279328] ACPI: thermal: Thermal Zone [EXTZ] (45 C)
[    2.294176] thermal LNXTHERM:03: registered as thermal_zone3
[    2.294183] ACPI: thermal: Thermal Zone [LOCZ] (43 C)
[    2.309174] thermal LNXTHERM:04: registered as thermal_zone4
[    2.309181] ACPI: thermal: Thermal Zone [BATZ] (36 C)
[    2.309577] thermal LNXTHERM:05: registered as thermal_zone5
[    2.309580] ACPI: thermal: Thermal Zone [PCHZ] (0 C)
[    2.309875] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.310133] ACPI: battery: Slot [BAT1] (battery absent)
[    2.310135] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.312558] serial 0000:00:16.3: enabling device (0000 -> 0003)
[    2.312967] 0000:00:16.3: ttyS4 at I/O 0x6070 (irq = 17, base_baud = 115200) is a 16550A
[    2.313242] Non-volatile memory driver v1.3
[    2.313245] Linux agpgart interface v0.103
[    2.319179] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
[    2.358092] ACPI: battery: Slot [BAT0] (battery present)
[    2.372810] ACPI: bus type drm_connector registered
[    2.373816] ahci 0000:00:1f.2: version 3.0
[    2.374081] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.384201] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode
[    2.384205] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    2.384207] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[    2.417929] scsi host0: ahci
[    2.418339] scsi host1: ahci
[    2.418683] scsi host2: ahci
[    2.418982] scsi host3: ahci
[    2.419138] scsi host4: ahci
[    2.419229] scsi host5: ahci
[    2.419265] ata1: SATA max UDMA/133 abar m2048@0xd9538000 port 0xd9538100 irq 30 lpm-pol 3
[    2.419269] ata2: SATA max UDMA/133 abar m2048@0xd9538000 port 0xd9538180 irq 30 lpm-pol 3
[    2.419272] ata3: SATA max UDMA/133 abar m2048@0xd9538000 port 0xd9538200 irq 30 lpm-pol 3
[    2.419275] ata4: SATA max UDMA/133 abar m2048@0xd9538000 port 0xd9538280 irq 30 lpm-pol 0
[    2.419278] ata5: SATA max UDMA/133 abar m2048@0xd9538000 port 0xd9538300 irq 30 lpm-pol 0
[    2.419281] ata6: SATA max UDMA/133 abar m2048@0xd9538000 port 0xd9538380 irq 30 lpm-pol 3
[    2.419328] ahci 0000:26:00.0: enabling device (0000 -> 0003)
[    2.419577] ahci 0000:26:00.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode
[    2.419581] ahci 0000:26:00.0: 1/1 ports implemented (port mask 0x1)
[    2.419582] ahci 0000:26:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    2.419788] scsi host6: ahci
[    2.419825] ata7: SATA max UDMA/133 abar m512@0xd9100000 port 0xd9100100 irq 31 lpm-pol 0
[    2.420230] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.420239] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.420253] ehci-pci 0000:00:1a.0: debug port 2
[    2.420315] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    2.420318] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    2.424167] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd953a000
[    2.433850] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.433943] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    2.433946] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.433948] usb usb1: Product: EHCI Host Controller
[    2.433950] usb usb1: Manufacturer: Linux 6.12.39-1-lts ehci_hcd
[    2.433951] usb usb1: SerialNumber: 0000:00:1a.0
[    2.434214] hub 1-0:1.0: USB hub found
[    2.434229] hub 1-0:1.0: 3 ports detected
[    2.434567] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.434581] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.435655] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[    2.435927] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.435930] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.435931] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    2.435935] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    2.435939] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    2.435956] ehci-pci 0000:00:1d.0: debug port 2
[    2.435988] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    2.435991] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.435993] usb usb2: Product: xHCI Host Controller
[    2.435994] usb usb2: Manufacturer: Linux 6.12.39-1-lts xhci-hcd
[    2.435995] usb usb2: SerialNumber: 0000:00:14.0
[    2.436135] hub 2-0:1.0: USB hub found
[    2.436149] hub 2-0:1.0: 4 ports detected
[    2.436674] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[    2.436677] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.436679] usb usb3: Product: xHCI Host Controller
[    2.436680] usb usb3: Manufacturer: Linux 6.12.39-1-lts xhci-hcd
[    2.436681] usb usb3: SerialNumber: 0000:00:14.0
[    2.436777] hub 3-0:1.0: USB hub found
[    2.436788] hub 3-0:1.0: 4 ports detected
[    2.437336] usbcore: registered new interface driver usbserial_generic
[    2.437343] usbserial: USB Serial support registered for generic
[    2.437469] rtc_cmos 00:03: RTC can wake from S4
[    2.437794] rtc_cmos 00:03: registered as rtc0
[    2.437846] rtc_cmos 00:03: setting system clock to 2025-07-20T13:53:53 UTC (1753019633)
[    2.437878] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.439869] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd9539000
[    2.440073] intel_pstate: Intel P-state driver initializing
[    2.440814] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
[    2.440816] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
[    2.441925] fbcon: Deferring console take-over
[    2.441927] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    2.441952] hid: raw HID events driver (C) Jiri Kosina
[    2.442011] drop_monitor: Initializing network drop monitor service
[    2.442105] NET: Registered PF_INET6 protocol family
[    2.447114] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.447192] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    2.447197] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.447200] usb usb4: Product: EHCI Host Controller
[    2.447202] usb usb4: Manufacturer: Linux 6.12.39-1-lts ehci_hcd
[    2.447204] usb usb4: SerialNumber: 0000:00:1d.0
[    2.447437] hub 4-0:1.0: USB hub found
[    2.447452] hub 4-0:1.0: 3 ports detected
[    2.450986] Segment Routing with IPv6
[    2.450989] RPL Segment Routing with IPv6
[    2.451006] In-situ OAM (IOAM) with IPv6
[    2.451040] NET: Registered PF_PACKET protocol family
[    2.452108] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    2.452433] microcode: Current revision: 0x00000021
[    2.452437] microcode: Updated early from: 0x00000016
[    2.452730] IPI shorthand broadcast: enabled
[    2.455621] sched_clock: Marking stable (2453336307, 411467)->(2518192035, -64444261)
[    2.456014] registered taskstats version 1
[    2.456764] Loading compiled-in X.509 certificates
[    2.462003] Loaded X.509 cert 'Build time autogenerated kernel key: 2ba680350a79638f6214a8074e5f24b1489efe89'
[    2.464606] Demotion targets for Node 0: null
[    2.464868] Key type .fscrypt registered
[    2.464871] Key type fscrypt-provisioning registered
[    2.476375] integrity: Loading X.509 certificate: UEFI:db
[    2.476422] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    2.476425] integrity: Loading X.509 certificate: UEFI:db
[    2.476460] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    2.491816] PM:   Magic number: 1:228:888
[    2.494557] RAS: Correctable Errors collector initialized.
[    2.504196] clk: Disabling unused clocks
[    2.504201] PM: genpd: Disabling unused power domains
[    2.677173] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[    2.677224] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.693877] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    2.728108] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.731578] ata7: SATA link down (SStatus 0 SControl 300)
[    2.739464] ata1.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.739942] ata1.00: ATA-8: ADATA SX900, 5.0.2a, max UDMA/133
[    2.740332] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.749365] ata1.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.750227] ata1.00: configured for UDMA/133
[    2.750966] scsi 0:0:0:0: Direct-Access     ATA      ADATA SX900      2a   PQ: 0 ANSI: 5
[    2.751705] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    2.751742] sd 0:0:0:0: [sda] Write Protect is off
[    2.751748] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.751782] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.751838] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    2.768464]  sda: sda1 sda2
[    2.768818] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.807682] usb 2-1: New USB device found, idVendor=0424, idProduct=5434, bcdDevice=30.82
[    2.807697] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.808708] hub 2-1:1.0: USB hub found
[    2.808794] hub 2-1:1.0: 4 ports detected
[    2.814118] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    2.814127] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.814632] hub 1-1:1.0: USB hub found
[    2.814746] hub 1-1:1.0: 6 ports detected
[    2.834291] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    2.834306] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.835201] hub 4-1:1.0: USB hub found
[    2.835412] hub 4-1:1.0: 8 ports detected
[    2.923861] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
[    2.937732] usb 3-1: New USB device found, idVendor=0424, idProduct=5434, bcdDevice=30.82
[    2.937747] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    2.937751] usb 3-1: Product: USB5534
[    2.937755] usb 3-1: Manufacturer: SMSC
[    2.937757] usb 3-1: SerialNumber: 1239567
[    2.938764] hub 3-1:1.0: USB hub found
[    2.939315] hub 3-1:1.0: 4 ports detected
[    3.061391] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.065115] ata2.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.090512] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    3.109756] ata2.00: ATA-8: TOSHIBA MQ01ABD050V, AX0U1Q, max UDMA/100
[    3.110181] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.110515] usb 4-1.6: new full-speed USB device number 3 using ehci-pci
[    3.111912] ata2.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.112693] ata2.00: configured for UDMA/100
[    3.114433] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD0 1Q   PQ: 0 ANSI: 5
[    3.115114] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.115126] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    3.115162] sd 1:0:0:0: [sdb] Write Protect is off
[    3.115168] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.115201] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.115256] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    3.180462] tsc: Refined TSC clocksource calibration: 2693.876 MHz
[    3.180486] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4a4ff17e, max_idle_ns: 440795216455 ns
[    3.180546] clocksource: Switched to clocksource tsc
[    3.201958] usb 4-1.6: New USB device found, idVendor=0a5c, idProduct=21e1, bcdDevice= 1.12
[    3.201973] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.201978] usb 4-1.6: Product: BCM20702A0
[    3.201981] usb 4-1.6: Manufacturer: Broadcom Corp
[    3.201985] usb 4-1.6: SerialNumber: 0C84DCE1A263
[    3.217234] usb 1-1.3: New USB device found, idVendor=093a, idProduct=7352, bcdDevice=52.2a
[    3.217249] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.217254] usb 1-1.3: Product: USB_2.0_Webcam
[    3.217258] usb 1-1.3: Manufacturer: PixArt Imaging Inc.
[    3.218658]  sdb: sdb1
[    3.218962] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.424900] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.428118] ata3.00: Model 'Slimtype DVD A  DS8A8SH', rev 'KAA2', applying quirks: maxseclba48
[    3.433933] ata3.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.433954] ata3.00: ATAPI: Slimtype DVD A  DS8A8SH, KAA2, max UDMA/100
[    3.446236] ata3.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.446261] ata3.00: configured for UDMA/100
[    3.465315] scsi 2:0:0:0: CD-ROM            Slimtype DVD A  DS8A8SH   KAA2 PQ: 0 ANSI: 5
[    3.795095] ata4: SATA link down (SStatus 0 SControl 300)
[    4.105044] ata5: SATA link down (SStatus 0 SControl 300)
[    4.414953] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.418567] ata6.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04)
[    4.420287] ata6.00: ATA-9: NOORTECH MSATA 256GB, T0707A0, max UDMA/133
[    4.423327] ata6.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    4.431278] ata6.00: ACPI cmd 00/00:00:00:00:00:a0(NOP) rejected by device (Stat=0x51 Err=0x04)
[    4.436041] ata6.00: configured for UDMA/133
[    4.446493] scsi 5:0:0:0: Direct-Access     ATA      NOORTECH MSATA 2 7A0  PQ: 0 ANSI: 5
[    4.447196] sd 5:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    4.447243] sd 5:0:0:0: [sdc] Write Protect is off
[    4.447249] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    4.447282] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.447337] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[    4.486481]  sdc: sdc1
[    4.486695] sd 5:0:0:0: [sdc] Attached SCSI disk
[    4.489583] Freeing unused decrypted memory: 2028K
[    4.490908] Freeing unused kernel image (initmem) memory: 4288K
[    4.491069] Write protecting the kernel read-only data: 34816k
[    4.492331] Freeing unused kernel image (rodata/data gap) memory: 2028K
[    4.577957] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.577962] rodata_test: all tests were successful
[    4.577964] x86/mm: Checking user space page tables
[    4.618759] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.618765] Run /init as init process
[    4.618766]   with arguments:
[    4.618767]     /init
[    4.618768]   with environment:
[    4.618769]     HOME=/
[    4.618770]     TERM=linux
[    5.216151] fbcon: Taking over console
[    5.218321] Console: switching to colour frame buffer device 200x56
[    5.231804] raid6: skipped pq benchmark and selected sse2x4
[    5.231809] raid6: using ssse3x2 recovery algorithm
[    5.236029] xor: automatically using best checksumming function   avx       
[    5.367159] Btrfs loaded, zoned=yes, fsverity=yes
[    5.486264] wmi_bus wmi_bus-PNP0C14:01: [Firmware Info]: 8F1F6436-9F42-42C8-BADC-0E9424F20C9A has zero instances
[    5.492137] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    5.494006] i8042: Detected active multiplexing controller, rev 1.1
[    5.494729] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.494738] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    5.494794] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    5.494823] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    5.494850] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    5.496117] ACPI: video: Video Device [DGFX] (multi-head: yes  rom: yes  post: no)
[    5.499651] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input3
[    5.513585] sdhci: Secure Digital Host Controller Interface driver
[    5.513590] sdhci: Copyright(c) Pierre Ossman
[    5.528061] sdhci-pci 0000:24:00.2: SDHCI controller found [197b:2391] (rev 30)
[    5.528061] sdhci-pci 0000:24:00.1: SDHCI controller found [197b:2392] (rev 30)
[    5.528104] sdhci-pci 0000:24:00.1: enabling device (0000 -> 0002)
[    5.528109] sdhci-pci 0000:24:00.2: enabling device (0000 -> 0002)
[    5.528246] sdhci-pci 0000:24:00.2: Refusing to bind to secondary interface.
[    5.528380] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    5.560496] mmc0: SDHCI controller on PCI [0000:24:00.1] using DMA
[    5.566859] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.566864] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.573831] firewire_ohci 0000:24:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[    5.583743] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    5.627336] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    6.087621] firewire_core 0000:24:00.0: created device fw0: GUID ffe473fffffffffe, S400
[    6.212884] BTRFS: device fsid 4a087651-6ea3-4e7f-a6c6-a76727e8259a devid 1 transid 22425 /dev/sda2 (8:2) scanned by mount (272)
[    6.213233] BTRFS info (device sda2): first mount of filesystem 4a087651-6ea3-4e7f-a6c6-a76727e8259a
[    6.213243] BTRFS info (device sda2): using crc32c (crc32c-intel) checksum algorithm
[    6.213249] BTRFS info (device sda2): using free-space-tree
[    6.391273] systemd[1]: systemd 257.7-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[    6.391280] systemd[1]: Detected architecture x86-64.
[    6.392147] systemd[1]: Hostname set to <noxarad>.
[    6.548958] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[    6.769056] zram: Added device: zram0
[    6.859865] systemd[1]: Queued start job for default target Graphical Interface.
[    6.895516] systemd[1]: Created slice Slice /system/dirmngr.
[    6.896109] systemd[1]: Created slice Slice /system/getty.
[    6.896598] systemd[1]: Created slice Slice /system/gpg-agent.
[    6.897101] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[    6.897589] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[    6.898102] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[    6.898571] systemd[1]: Created slice Slice /system/keyboxd.
[    6.899006] systemd[1]: Created slice Slice /system/modprobe.
[    6.899431] systemd[1]: Created slice Slice /system/systemd-fsck.
[    6.899854] systemd[1]: Created slice Slice /system/systemd-zram-setup.
[    6.900173] systemd[1]: Created slice User and Session Slice.
[    6.900292] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.900391] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.900641] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.900714] systemd[1]: Expecting device /dev/disk/by-uuid/66c88df4-44a6-4a2a-9a14-3363b3a30078...
[    6.900766] systemd[1]: Expecting device /dev/disk/by-uuid/D586-E324...
[    6.900811] systemd[1]: Expecting device /dev/disk/by-uuid/ca2594ab-04b5-4bae-b205-c72ab85c7d4a...
[    6.900857] systemd[1]: Expecting device /dev/zram0...
[    6.900904] systemd[1]: Reached target Local Encrypted Volumes.
[    6.900957] systemd[1]: Reached target Login Prompts.
[    6.901006] systemd[1]: Reached target Local Integrity Protected Volumes.
[    6.901070] systemd[1]: Reached target Path Units.
[    6.901124] systemd[1]: Reached target Remote File Systems.
[    6.901173] systemd[1]: Reached target Slice Units.
[    6.901240] systemd[1]: Reached target Local Verity Protected Volumes.
[    6.901365] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.902760] systemd[1]: Listening on Process Core Dump Socket.
[    6.903566] systemd[1]: Listening on Credential Encryption/Decryption.
[    6.903725] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.904022] systemd[1]: Listening on Journal Sockets.
[    6.904151] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.904174] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.904262] systemd[1]: Listening on udev Control Socket.
[    6.904342] systemd[1]: Listening on udev Kernel Socket.
[    6.904434] systemd[1]: Listening on User Database Manager Socket.
[    6.906016] systemd[1]: Mounting Huge Pages File System...
[    6.906971] systemd[1]: Mounting POSIX Message Queue File System...
[    6.907742] systemd[1]: Mounting Kernel Debug File System...
[    6.908489] systemd[1]: Mounting Kernel Trace File System...
[    6.909977] systemd[1]: Starting Create List of Static Device Nodes...
[    6.911465] systemd[1]: Starting Load Kernel Module configfs...
[    6.912907] systemd[1]: Starting Load Kernel Module dm_mod...
[    6.914041] systemd[1]: Starting Load Kernel Module drm...
[    6.915369] systemd[1]: Starting Load Kernel Module fuse...
[    6.916390] systemd[1]: Starting Load Kernel Module loop...
[    6.916653] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[    6.919011] systemd[1]: Starting Journal Service...
[    6.922887] systemd[1]: Starting Load Kernel Modules...
[    6.925372] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.926583] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.928589] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    6.929783] systemd[1]: Starting Load udev Rules from Credentials...
[    6.930395] device-mapper: uevent: version 1.0.3
[    6.930424] loop: module loaded
[    6.930505] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    6.933467] systemd[1]: Starting Coldplug All udev Devices...
[    6.938135] systemd-journald[335]: Collecting audit messages is disabled.
[    6.938776] systemd[1]: Mounted Huge Pages File System.
[    6.940109] systemd[1]: Mounted POSIX Message Queue File System.
[    6.940689] systemd[1]: Mounted Kernel Debug File System.
[    6.941020] systemd[1]: Mounted Kernel Trace File System.
[    6.941495] systemd[1]: Finished Create List of Static Device Nodes.
[    6.942032] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    6.942195] systemd[1]: Finished Load Kernel Module configfs.
[    6.942769] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    6.942930] systemd[1]: Finished Load Kernel Module dm_mod.
[    6.943426] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    6.943578] systemd[1]: Finished Load Kernel Module drm.
[    6.944858] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    6.945013] systemd[1]: Finished Load Kernel Module fuse.
[    6.945512] systemd[1]: modprobe@loop.service: Deactivated successfully.
[    6.945674] systemd[1]: Finished Load Kernel Module loop.
[    6.983069] systemd[1]: Mounting FUSE Control File System...
[    6.985942] systemd[1]: Mounting Kernel Configuration File System...
[    6.987672] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
[    6.988531] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
[    6.991983] systemd[1]: Mounted FUSE Control File System.
[    6.993788] BTRFS info (device sda2 state M): use zstd compression, level 3
[    6.995275] systemd[1]: Finished Remount Root and Kernel File Systems.
[    6.996272] systemd[1]: Finished Load udev Rules from Credentials.
[    6.997366] systemd[1]: Mounted Kernel Configuration File System.
[    6.998471] systemd[1]: Rebuild Hardware Database was skipped because no trigger condition checks were met.
[    6.999720] systemd[1]: Starting Load/Save OS Random Seed...
[    7.000209] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    7.007121] systemd[1]: Starting User Database Manager...
[    7.013510] systemd[1]: Finished Load/Save OS Random Seed.
[    7.034911] systemd[1]: Started User Database Manager.
[    7.046403] systemd[1]: Started Journal Service.
[    7.088238] systemd-journald[335]: Received client request to flush runtime journal.
[    7.298410] zram0: detected capacity change from 0 to 8388608
[    7.340291] hp_accel: laptop model unknown, using default axes configuration
[    7.344561] input: Wireless hotkeys as /devices/virtual/input/input9
[    7.377193] parport_pc 00:05: reported by Plug and Play ACPI
[    7.377337] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[    7.387832] nvidia: loading out-of-tree module taints kernel.
[    7.387847] nvidia: module license 'NVIDIA' taints kernel.
[    7.387849] Disabling lock debugging due to kernel taint
[    7.387854] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    7.387856] nvidia: module license taints kernel.
[    7.393400] pps_core: LinuxPPS API ver. 1 registered
[    7.393405] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    7.397319] Adding 4194300k swap on /dev/zram0.  Priority:100 extents:1 across:4194300k SSDsc
[    7.402992] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20240827/utaddress-204)
[    7.403004] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    7.403008] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240827/utaddress-204)
[    7.403014] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    7.403016] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240827/utaddress-204)
[    7.403020] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    7.403022] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20240827/utaddress-204)
[    7.403026] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    7.403027] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.408759] PTP clock support registered
[    7.465162] lis3lv02d: 8 bits 3DC sensor found
[    7.473862] mc: Linux media interface: v0.10
[    7.474319] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.478788] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.479007] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    7.479933] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    7.479938] cfg80211: failed to load regulatory.db
[    7.617153] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
[    7.750682] videodev: Linux video capture interface: v2.00
[    7.752926] input: PC Speaker as /devices/platform/pcspkr/input/input13
[    7.753013] e1000e: Intel(R) PRO/1000 Network Driver
[    7.753016] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.756306] nvidia-nvlink: Nvlink Core is being initialized, major device number 236

[    7.757226] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    7.761444] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
[    7.765257] Intel(R) Wireless WiFi driver for Linux
[    7.765383] iwlwifi 0000:25:00.0: enabling device (0000 -> 0002)
[    7.765535] iwlwifi 0000:25:00.0: can't disable ASPM; OS doesn't have ASPM control
[    7.773334] iwlwifi 0000:25:00.0: Detected crf-id 0xa5a5a5a1, cnv-id 0xa5a5a5a1 wfpm id 0xa5a5a5a1
[    7.773375] iwlwifi 0000:25:00.0: PCI dev 422b/1101, rev=0x74, rfid=0xd55555d5
[    7.773379] iwlwifi 0000:25:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN
[    7.774175] iwlwifi 0000:25:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[    7.774218] iwlwifi 0000:25:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[    7.775510] iTCO_vendor_support: vendor-support=0
[    7.780016] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
[    7.780228] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    7.780500] iwlwifi 0000:25:00.0: loaded firmware version 9.221.4.1 build 25532 6000-4.ucode op_mode iwldvm
[    7.783829] i2c i2c-0: Successfully instantiated SPD at 0x50
[    7.784353] i2c i2c-0: Successfully instantiated SPD at 0x51
[    7.784676] i2c i2c-0: Successfully instantiated SPD at 0x52
[    7.784996] i2c i2c-0: Successfully instantiated SPD at 0x53
[    7.796503] ppdev: user-space parallel port driver
[    7.796629] input: HP WMI hotkeys as /devices/virtual/input/input16
[    7.796830] iTCO_wdt iTCO_wdt.1.auto: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    7.796900] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[    7.825609] at24 0-0050: supply vcc not found, using dummy regulator
[    7.826191] Bluetooth: Core ver 2.22
[    7.826301] NET: Registered PF_BLUETOOTH protocol family
[    7.826304] Bluetooth: HCI device and connection manager initialized
[    7.826309] Bluetooth: HCI socket layer initialized
[    7.826312] Bluetooth: L2CAP socket layer initialized
[    7.826317] Bluetooth: SCO socket layer initialized
[    7.829078] at24 0-0050: 256 byte spd EEPROM, read-only
[    7.829128] at24 0-0051: supply vcc not found, using dummy regulator
[    7.830780] at24 0-0051: 256 byte spd EEPROM, read-only
[    7.830812] at24 0-0052: supply vcc not found, using dummy regulator
[    7.832406] at24 0-0052: 256 byte spd EEPROM, read-only
[    7.832438] at24 0-0053: supply vcc not found, using dummy regulator
[    7.834033] at24 0-0053: 256 byte spd EEPROM, read-only
[    7.841404] usb 1-1.3: Found UVC 1.00 device USB_2.0_Webcam (093a:7352)
[    7.853683] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    7.865667] usbcore: registered new interface driver uvcvideo
[    7.912177] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    7.912578] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    7.912628] snd_hda_intel 0000:01:00.1: Disabling MSI
[    7.912634] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    7.922233] usbcore: registered new interface driver btusb
[    7.938923] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[    7.939050] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[    7.939104] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[    7.939168] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[    7.939175] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) a0:48:1c:dc:31:9a
[    7.939181] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    7.939212] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    7.994002] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUG enabled
[    7.994007] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    7.994009] iwlwifi 0000:25:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    7.994012] iwlwifi 0000:25:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[    7.996029] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    7.996308] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[    7.996312] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    7.996315] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    7.996318] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    7.996319] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    7.996321] snd_hda_codec_idt hdaudioC0D0:      Mic=0xc
[    7.996323] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[    7.996325] snd_hda_codec_idt hdaudioC0D0:      Line=0xf
[    8.003346] BTRFS: device fsid 66c88df4-44a6-4a2a-9a14-3363b3a30078 devid 1 transid 96467 /dev/sdc1 (8:33) scanned by mount (487)
[    8.022218] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    8.088790] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[    8.089012] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    8.089070] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[    8.089124] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24
[    8.163901] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.166130] iwlwifi 0000:25:00.0 wlo1: renamed from wlan0
[    8.220039] EXT4-fs (sdb1): mounted filesystem ca2594ab-04b5-4bae-b205-c72ab85c7d4a r/w with ordered data mode. Quota mode: none.
[    8.249363] psmouse serio4: synaptics: queried max coordinates: x [..5648], y [..4806]
[    8.286331] psmouse serio4: synaptics: queried min coordinates: x [1292..], y [1048..]
[    8.286338] psmouse serio4: synaptics: Your touchpad (PNP: SYN018d SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    8.354491] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd40123/0x840300/0x26c00/0x0, board id: 2009, fw id: 1119621
[    8.399379] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input15
[    8.405770] mousedev: PS/2 mouse device common for all mice
[    9.276888] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  470.256.02  Thu May  2 14:37:44 UTC 2024
[    9.277130] BTRFS info (device sdc1): first mount of filesystem 66c88df4-44a6-4a2a-9a14-3363b3a30078
[    9.277144] BTRFS info (device sdc1): using crc32c (crc32c-intel) checksum algorithm
[    9.277152] BTRFS info (device sdc1): using free-space-tree
[    9.313993] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[    9.316399] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  470.256.02  Thu May  2 14:50:40 UTC 2024
[    9.414721] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    9.414727] [drm] Initialized nvidia-drm 0.0.0 for 0000:01:00.0 on minor 1
[    9.414729] Failed to initialize the nv-hotplug-helper DRM client (ensure DRM kernel mode setting is enabled via nvidia-drm.modeset=1).
[    9.414730] [drm] [nvidia-drm] [GPU ID 0x00000100] Unloading driver
[    9.415642] nvidia-uvm: Loaded the UVM driver, major device number 234.
[   10.805922] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[   10.805929] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   10.805931] RAPL PMU: hw unit of domain package 2^-16 Joules
[   10.815502] cryptd: max_cpu_qlen set to 1000
[   10.828412] AES CTR mode by8 optimization enabled
[   11.007749] intel_rapl_common: Found RAPL domain package
[   11.007754] intel_rapl_common: Found RAPL domain core
[   11.126416] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[   11.374101] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[   11.510521] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[   11.757500] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[   15.070016] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[   15.312862] iwlwifi 0000:25:00.0: Radio type=0x0-0x3-0x1
[   15.476814] wlo1: authenticate with ec:4f:82:50:c8:46 (local address=3c:a9:f4:67:33:8c)
[   15.476818] wlo1: send auth to ec:4f:82:50:c8:46 (try 1/3)
[   15.479640] wlo1: authenticated
[   15.479712] wlo1: waiting for beacon from ec:4f:82:50:c8:46
[   15.483760] wlo1: associate with ec:4f:82:50:c8:46 (try 1/3)
[   15.487902] wlo1: RX AssocResp from ec:4f:82:50:c8:46 (capab=0x11 status=0 aid=3)
[   15.493487] wlo1: associated
[   15.730669] wlo1: Limiting TX power to 20 (20 - 0) dBm as advertised by ec:4f:82:50:c8:46

The relevant bit probably starts at [    7.387832]

This is also my xorg log

[    12.061] (--) Log file renamed from "/var/log/Xorg.pid-654.log" to "/var/log/Xorg.0.log"
[    12.062] 
X.Org X Server 1.21.1.18
X Protocol Version 11, Revision 0
[    12.062] Current Operating System: Linux noxarad 6.12.39-1-lts #1 SMP PREEMPT_DYNAMIC Thu, 17 Jul 2025 19:01:26 +0000 x86_64
[    12.062] Kernel command line: root=PARTUUID=92fda810-0527-47f3-a446-bf0103cc2751 zswap.enabled=0 rw rootfstype=btrfs
[    12.062]  
[    12.062] Current version of pixman: 0.46.2
[    12.062] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    12.062] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    12.062] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 20 16:54:03 2025
[    12.063] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    12.063] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    12.063] (==) No Layout section.  Using the first Screen section.
[    12.063] (==) No screen section available. Using defaults.
[    12.063] (**) |-->Screen "Default Screen Section" (0)
[    12.063] (**) |   |-->Monitor "<default monitor>"
[    12.063] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    12.063] (**) Allowing byte-swapped clients
[    12.063] (==) Automatically adding devices
[    12.063] (==) Automatically enabling devices
[    12.063] (==) Automatically adding GPU devices
[    12.063] (==) Automatically binding GPU devices
[    12.063] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    12.063] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    12.063] 	Entry deleted from font path.
[    12.063] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[    12.063] 	Entry deleted from font path.
[    12.063] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[    12.063] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    12.063] 	Entry deleted from font path.
[    12.063] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    12.063] 	Entry deleted from font path.
[    12.063] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    12.063] 	Entry deleted from font path.
[    12.063] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    12.063] 	Entry deleted from font path.
[    12.063] (==) FontPath set to:
	
[    12.063] (==) ModulePath set to "/usr/lib/xorg/modules"
[    12.063] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    12.063] (II) Module ABI versions:
[    12.063] 	X.Org ANSI C Emulation: 0.4
[    12.063] 	X.Org Video Driver: 25.2
[    12.063] 	X.Org XInput driver : 24.4
[    12.063] 	X.Org Server Extension : 10.0
[    12.064] (++) using VT number 2

[    12.064] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    12.064] (II) xfree86: Adding drm device (/dev/dri/card0)
[    12.064] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/simple-framebuffer.0/drm/card0
[    12.069] (--) PCI:*(1@0:0:0) 10de:11be:103c:176c rev 161, Mem @ 0xd8000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/131072
[    12.069] (II) LoadModule: "glx"
[    12.069] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    12.076] (II) Module glx: vendor="X.Org Foundation"
[    12.076] 	compiled for 1.21.1.18, module version = 1.0.0
[    12.076] 	ABI class: X.Org Server Extension, version 10.0
[    12.076] (==) Matched nouveau as autoconfigured driver 0
[    12.076] (==) Matched nv as autoconfigured driver 1
[    12.076] (==) Matched modesetting as autoconfigured driver 2
[    12.076] (==) Matched fbdev as autoconfigured driver 3
[    12.076] (==) Matched vesa as autoconfigured driver 4
[    12.076] (==) Assigned the driver to the xf86ConfigLayout
[    12.076] (II) LoadModule: "nouveau"
[    12.076] (WW) Warning, couldn't open module nouveau
[    12.076] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    12.076] (II) LoadModule: "nv"
[    12.076] (WW) Warning, couldn't open module nv
[    12.076] (EE) Failed to load module "nv" (module does not exist, 0)
[    12.076] (II) LoadModule: "modesetting"
[    12.076] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    12.078] (II) Module modesetting: vendor="X.Org Foundation"
[    12.078] 	compiled for 1.21.1.18, module version = 1.21.1
[    12.078] 	Module class: X.Org Video Driver
[    12.078] 	ABI class: X.Org Video Driver, version 25.2
[    12.078] (II) LoadModule: "fbdev"
[    12.078] (WW) Warning, couldn't open module fbdev
[    12.078] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    12.078] (II) LoadModule: "vesa"
[    12.078] (WW) Warning, couldn't open module vesa
[    12.078] (EE) Failed to load module "vesa" (module does not exist, 0)
[    12.078] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    12.085] (II) modeset(0): using drv /dev/dri/card0
[    12.085] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    12.085] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    12.085] (==) modeset(0): RGB weight 888
[    12.085] (==) modeset(0): Default visual is TrueColor
[    12.085] (II) Loading sub module "glamoregl"
[    12.085] (II) LoadModule: "glamoregl"
[    12.085] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    12.094] (II) Module glamoregl: vendor="X.Org Foundation"
[    12.094] 	compiled for 1.21.1.18, module version = 1.0.1
[    12.094] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    12.614] (II) modeset(0): Refusing to try glamor on llvmpipe
[    12.616] (II) modeset(0): glamor initialization failed
[    12.616] (II) modeset(0): ShadowFB: preferred NO, enabled NO
[    12.616] (II) modeset(0): Output None-1 has no monitor section
[    12.617] (II) modeset(0): EDID for output None-1
[    12.617] (II) modeset(0): Printing probed modes for output None-1
[    12.617] (II) modeset(0): Modeline "1600x900"x60.0   86.40  1600 1600 1600 1600  900 900 900 900 (54.0 kHz eP)
[    12.617] (II) modeset(0): Output None-1 connected
[    12.617] (II) modeset(0): Using exact sizes for initial modes
[    12.617] (II) modeset(0): Output None-1 using initial mode 1600x900 +0+0
[    12.617] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    12.617] (==) modeset(0): DPI set to (96, 96)
[    12.617] (II) Loading sub module "fb"
[    12.617] (II) LoadModule: "fb"
[    12.617] (II) Module "fb" already built-in
[    12.617] (==) modeset(0): Backing store enabled
[    12.617] (==) modeset(0): Silken mouse enabled
[    12.617] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    12.617] (==) modeset(0): DPMS enabled
[    12.617] (II) Initializing extension Generic Event Extension
[    12.617] (II) Initializing extension SHAPE
[    12.617] (II) Initializing extension MIT-SHM
[    12.617] (II) Initializing extension XInputExtension
[    12.618] (II) Initializing extension XTEST
[    12.618] (II) Initializing extension BIG-REQUESTS
[    12.618] (II) Initializing extension SYNC
[    12.618] (II) Initializing extension XKEYBOARD
[    12.618] (II) Initializing extension XC-MISC
[    12.618] (II) Initializing extension SECURITY
[    12.618] (II) Initializing extension XFIXES
[    12.619] (II) Initializing extension RENDER
[    12.619] (II) Initializing extension RANDR
[    12.619] (II) Initializing extension COMPOSITE
[    12.619] (II) Initializing extension DAMAGE
[    12.619] (II) Initializing extension MIT-SCREEN-SAVER
[    12.619] (II) Initializing extension DOUBLE-BUFFER
[    12.619] (II) Initializing extension RECORD
[    12.619] (II) Initializing extension DPMS
[    12.620] (II) Initializing extension Present
[    12.620] (II) Initializing extension DRI3
[    12.620] (II) Initializing extension X-Resource
[    12.620] (II) Initializing extension XVideo
[    12.620] (II) Initializing extension XVideo-MotionCompensation
[    12.620] (II) Initializing extension GLX
[    12.620] (II) AIGLX: Screen 0 is not DRI2 capable
[    12.634] (II) IGLX: Loaded and initialized swrast
[    12.634] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    12.634] (II) Initializing extension XFree86-VidModeExtension
[    12.634] (II) Initializing extension XFree86-DGA
[    12.634] (II) Initializing extension XFree86-DRI
[    12.634] (II) Initializing extension DRI2
[    12.636] (II) modeset(0): Damage tracking initialized
[    12.636] (II) modeset(0): Setting screen physical size to 423 x 238
[    12.701] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    12.701] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    12.701] (**) Power Button: Applying InputClass "system-keyboard"
[    12.701] (II) LoadModule: "libinput"
[    12.701] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    12.708] (II) Module libinput: vendor="X.Org Foundation"
[    12.708] 	compiled for 1.21.1.13, module version = 1.5.0
[    12.708] 	Module class: X.Org XInput Driver
[    12.708] 	ABI class: X.Org XInput driver, version 24.4
[    12.708] (II) Using input driver 'libinput' for 'Power Button'
[    12.708] (**) Power Button: always reports core events
[    12.708] (**) Option "Device" "/dev/input/event2"
[    12.713] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    12.713] (II) event2  - Power Button: device is a keyboard
[    12.713] (II) event2  - Power Button: device removed
[    12.733] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    12.733] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    12.733] (**) Option "xkb_model" "pc105+inet"
[    12.733] (**) Option "xkb_layout" "us"
[    12.733] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    12.751] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    12.751] (II) event2  - Power Button: device is a keyboard
[    12.752] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    12.752] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    12.752] (**) Video Bus: Applying InputClass "system-keyboard"
[    12.752] (II) Using input driver 'libinput' for 'Video Bus'
[    12.752] (**) Video Bus: always reports core events
[    12.753] (**) Option "Device" "/dev/input/event3"
[    12.754] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    12.754] (II) event3  - Video Bus: device is a keyboard
[    12.754] (II) event3  - Video Bus: device removed
[    12.806] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input3/event3"
[    12.806] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    12.806] (**) Option "xkb_model" "pc105+inet"
[    12.806] (**) Option "xkb_layout" "us"
[    12.806] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    12.809] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    12.809] (II) event3  - Video Bus: device is a keyboard
[    12.810] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    12.810] (II) No input driver specified, ignoring this device.
[    12.810] (II) This device may have been added with another device file.
[    12.811] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    12.811] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    12.811] (**) Sleep Button: Applying InputClass "system-keyboard"
[    12.811] (II) Using input driver 'libinput' for 'Sleep Button'
[    12.811] (**) Sleep Button: always reports core events
[    12.811] (**) Option "Device" "/dev/input/event0"
[    12.812] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    12.812] (II) event0  - Sleep Button: device is a keyboard
[    12.812] (II) event0  - Sleep Button: device removed
[    12.833] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    12.833] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    12.833] (**) Option "xkb_model" "pc105+inet"
[    12.833] (**) Option "xkb_layout" "us"
[    12.833] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    12.835] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    12.835] (II) event0  - Sleep Button: device is a keyboard
[    12.836] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[    12.836] (II) No input driver specified, ignoring this device.
[    12.836] (II) This device may have been added with another device file.
[    12.837] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[    12.837] (II) No input driver specified, ignoring this device.
[    12.837] (II) This device may have been added with another device file.
[    12.838] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[    12.838] (II) No input driver specified, ignoring this device.
[    12.838] (II) This device may have been added with another device file.
[    12.838] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[    12.838] (II) No input driver specified, ignoring this device.
[    12.838] (II) This device may have been added with another device file.
[    12.839] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[    12.839] (II) No input driver specified, ignoring this device.
[    12.839] (II) This device may have been added with another device file.
[    12.839] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event14)
[    12.839] (II) No input driver specified, ignoring this device.
[    12.839] (II) This device may have been added with another device file.
[    12.840] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event15)
[    12.840] (II) No input driver specified, ignoring this device.
[    12.840] (II) This device may have been added with another device file.
[    12.841] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[    12.841] (II) No input driver specified, ignoring this device.
[    12.841] (II) This device may have been added with another device file.
[    12.841] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    12.841] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    12.842] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    12.842] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    12.842] (**) AT Translated Set 2 keyboard: always reports core events
[    12.842] (**) Option "Device" "/dev/input/event4"
[    12.843] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    12.843] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    12.844] (II) event4  - AT Translated Set 2 keyboard: device removed
[    12.876] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    12.876] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    12.876] (**) Option "xkb_model" "pc105+inet"
[    12.876] (**) Option "xkb_layout" "us"
[    12.876] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    12.878] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    12.879] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    12.880] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[    12.880] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    12.880] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    12.880] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    12.880] (**) Option "Device" "/dev/input/event17"
[    12.882] (II) event17 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    12.884] (II) event17 - SynPS/2 Synaptics TouchPad: device is a touchpad
[    12.884] (II) event17 - SynPS/2 Synaptics TouchPad: device removed
[    12.930] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    12.930] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    12.930] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    12.930] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input15/event17"
[    12.930] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[    12.932] (**) Option "AccelerationScheme" "none"
[    12.932] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    12.932] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    12.932] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    12.934] (II) event17 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    12.936] (II) event17 - SynPS/2 Synaptics TouchPad: device is a touchpad
[    12.937] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    12.937] (II) No input driver specified, ignoring this device.
[    12.937] (II) This device may have been added with another device file.
[    12.938] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event6)
[    12.938] (II) No input driver specified, ignoring this device.
[    12.938] (II) This device may have been added with another device file.
[    12.938] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    12.939] (II) No input driver specified, ignoring this device.
[    12.939] (II) This device may have been added with another device file.
[    12.939] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    12.939] (II) No input driver specified, ignoring this device.
[    12.939] (II) This device may have been added with another device file.
[    12.944] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event8)
[    12.944] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    12.944] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[    12.944] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[    12.944] (**) HP WMI hotkeys: always reports core events
[    12.944] (**) Option "Device" "/dev/input/event8"
[    12.945] (II) event8  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    12.945] (II) event8  - HP WMI hotkeys: device is a keyboard
[    12.945] (II) event8  - HP WMI hotkeys: device removed
[    12.996] (**) Option "config_info" "udev:/sys/devices/virtual/input/input16/event8"
[    12.996] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 11)
[    12.996] (**) Option "xkb_model" "pc105+inet"
[    12.996] (**) Option "xkb_layout" "us"
[    12.996] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    12.998] (II) event8  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    12.998] (II) event8  - HP WMI hotkeys: device is a keyboard
[    12.999] (II) config/udev: Adding input device Wireless hotkeys (/dev/input/event5)
[    12.999] (**) Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[    12.999] (**) Wireless hotkeys: Applying InputClass "system-keyboard"
[    12.999] (II) Using input driver 'libinput' for 'Wireless hotkeys'
[    12.999] (**) Wireless hotkeys: always reports core events
[    12.999] (**) Option "Device" "/dev/input/event5"
[    13.000] (II) event5  - Wireless hotkeys: is tagged by udev as: Keyboard
[    13.000] (II) event5  - Wireless hotkeys: device is a keyboard
[    13.001] (II) event5  - Wireless hotkeys: device removed
[    13.050] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event5"
[    13.050] (II) XINPUT: Adding extended input device "Wireless hotkeys" (type: KEYBOARD, id 12)
[    13.050] (**) Option "xkb_model" "pc105+inet"
[    13.050] (**) Option "xkb_layout" "us"
[    13.050] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    13.052] (II) event5  - Wireless hotkeys: is tagged by udev as: Keyboard
[    13.052] (II) event5  - Wireless hotkeys: device is a keyboard

Last edited by noxar_ad (2025-07-21 10:22:58)

Scimmia

Fellow

Registered: 2012-09-01

Posts: 13,724

Re: [SOLVED] Screen tearing nvidia-470xx-dkms awesomewm

nvidia-470xx-utils is a dependency of nvidia-470xx-dkms, but it doesn't appear to be installed? What does `pacman -Qs nvidia` show?

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 75,211

Re: [SOLVED] Screen tearing nvidia-470xx-dkms awesomewm

You're running software emulation on the simpledrm device.
Add "nvidia_drm.modeset=1" to the https://wiki.archlinux.org/title/Kernel_parameters and in doubt report back w/ an updated system journal for the boot:

sudo journalctl -b | curl -F 'file=@-' 0x0.st

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

noxar_ad

Member

Registered: 2025-07-04

Posts: 8

Re: [SOLVED] Screen tearing nvidia-470xx-dkms awesomewm

sysctl: cannot stat /proc/sys/nvidia_drm/modeset: No such file or directory

And I have nvidia-470xx-utils installed.

[noxar_ad@noxarad ~]$ pacman -Qs nvidia
local/egl-gbm 1.1.2.1-1
    The GBM EGL external platform library
local/egl-wayland 4:1.1.19-1
    EGLStream-based Wayland external platform
local/egl-x11 1.0.2-1
    NVIDIA XLib and XCB EGL Platform Library
local/lib32-vulkan-nouveau 1:25.1.6-1
    Open-source Vulkan driver for Nvidia GPUs - 32-bit
local/libvdpau 1.5-3
    Nvidia VDPAU library
local/linux-firmware-nvidia 20250708-1
    Firmware files for Linux - Firmware for NVIDIA GPUs and SoCs
local/nvidia-470xx-dkms 470.256.02-7.98
    NVIDIA drivers - module sources
local/nvidia-470xx-utils 470.256.02-7.98
    NVIDIA drivers utilities
local/vulkan-nouveau 1:25.1.6-1
    Open-source Vulkan driver for Nvidia GPUs

Last edited by noxar_ad (2025-07-21 06:25:47)

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 75,211

Re: [SOLVED] Screen tearing nvidia-470xx-dkms awesomewm

sysctl: cannot stat /proc/sys/nvidia_drm/modeset: No such file or directory

Add "nvidia_drm.modeset=1" to the https://wiki.archlinux.org/title/Kernel_parameters and in doubt report back w/ an updated system journal for the boot:

sudo journalctl -b | curl -F 'file=@-' 0x0.st

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

noxar_ad

Member

Registered: 2025-07-04

Posts: 8

Re: [SOLVED] Screen tearing nvidia-470xx-dkms awesomewm

I don't quite understand, don't you mean adding it to my kernel parameters? and one of the ways mentioned in the wiki is through sysctl which raises an error.

Last edited by noxar_ad (2025-07-21 07:45:00)

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 75,211

Re: [SOLVED] Screen tearing nvidia-470xx-dkms awesomewm

You need to add that to the kernel commandline, not during runtime when it's waaaaaaay too late anyway.

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

noxar_ad

Member

Registered: 2025-07-04

Posts: 8

Re: [SOLVED] Screen tearing nvidia-470xx-dkms awesomewm

I've figured it out, I edited mkinitcpio.conf and my modules.

sudo cat /sys/module/nvidia_drm/parameters/modeset

returns Y

I've also tried installing picom and running it with --vsync flag and I still see some tearing (although it is less noticeable)

https://0x0.st/8nXZ.txt

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 75,211

Re: [SOLVED] Screen tearing nvidia-470xx-dkms awesomewm

I've figured it out, I edited mkinitcpio.conf and my modules.

You need to add that to the kernel commandline

not explicitly loading some module (though it would seem rather you added a modprobe.conf entry what it NOT what I suggested)

Anyway… since KMS now loads, what does your xorg log look like now?

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

noxar_ad

Member

Registered: 2025-07-04

Posts: 8

Re: [SOLVED] Screen tearing nvidia-470xx-dkms awesomewm

I use EFI boot stub and this was the first method mentioned (I also found someone with the same problem on the forums and copied their method).

Anyways here are the logs

[noxar_ad@noxarad ~]$ cat /var/log/Xorg.0.log
[    15.236] (--) Log file renamed from "/var/log/Xorg.pid-663.log" to "/var/log/Xorg.0.log"
[    15.237] 
X.Org X Server 1.21.1.18
X Protocol Version 11, Revision 0
[    15.237] Current Operating System: Linux noxarad 6.12.39-1-lts #1 SMP PREEMPT_DYNAMIC Thu, 17 Jul 2025 19:01:26 +0000 x86_64
[    15.237] Kernel command line: root=PARTUUID=92fda810-0527-47f3-a446-bf0103cc2751 zswap.enabled=0 rw rootfstype=btrfs
[    15.237]  
[    15.237] Current version of pixman: 0.46.4
[    15.237] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    15.237] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.237] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 21 11:11:55 2025
[    15.238] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    15.238] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.238] (==) No Layout section.  Using the first Screen section.
[    15.238] (==) No screen section available. Using defaults.
[    15.238] (**) |-->Screen "Default Screen Section" (0)
[    15.238] (**) |   |-->Monitor "<default monitor>"
[    15.238] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    15.238] (**) Allowing byte-swapped clients
[    15.238] (==) Automatically adding devices
[    15.238] (==) Automatically enabling devices
[    15.238] (==) Automatically adding GPU devices
[    15.238] (==) Automatically binding GPU devices
[    15.238] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    15.238] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    15.238] 	Entry deleted from font path.
[    15.239] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[    15.239] 	Entry deleted from font path.
[    15.239] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[    15.239] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    15.239] 	Entry deleted from font path.
[    15.239] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    15.239] 	Entry deleted from font path.
[    15.239] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    15.239] 	Entry deleted from font path.
[    15.239] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    15.239] 	Entry deleted from font path.
[    15.239] (==) FontPath set to:
	
[    15.239] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.239] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    15.239] (II) Module ABI versions:
[    15.239] 	X.Org ANSI C Emulation: 0.4
[    15.239] 	X.Org Video Driver: 25.2
[    15.239] 	X.Org XInput driver : 24.4
[    15.239] 	X.Org Server Extension : 10.0
[    15.239] (++) using VT number 2

[    15.239] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    15.241] (II) xfree86: Adding drm device (/dev/dri/card1)
[    15.241] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[    15.241] (II) xfree86: Adding drm device (/dev/dri/card0)
[    15.241] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/simple-framebuffer.0/drm/card0
[    15.244] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    15.245] (--) PCI:*(1@0:0:0) 10de:11be:103c:176c rev 161, Mem @ 0xd8000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/131072
[    15.245] (II) LoadModule: "glx"
[    15.245] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.253] (II) Module glx: vendor="X.Org Foundation"
[    15.253] 	compiled for 1.21.1.18, module version = 1.0.0
[    15.253] 	ABI class: X.Org Server Extension, version 10.0
[    15.253] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    15.253] 	loading driver: nvidia
[    15.253] (==) Matched nouveau as autoconfigured driver 0
[    15.253] (==) Matched nv as autoconfigured driver 1
[    15.253] (==) Matched nvidia as autoconfigured driver 2
[    15.253] (==) Matched modesetting as autoconfigured driver 3
[    15.253] (==) Matched fbdev as autoconfigured driver 4
[    15.253] (==) Matched vesa as autoconfigured driver 5
[    15.253] (==) Assigned the driver to the xf86ConfigLayout
[    15.253] (II) LoadModule: "nouveau"
[    15.253] (WW) Warning, couldn't open module nouveau
[    15.253] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    15.253] (II) LoadModule: "nv"
[    15.253] (WW) Warning, couldn't open module nv
[    15.253] (EE) Failed to load module "nv" (module does not exist, 0)
[    15.253] (II) LoadModule: "nvidia"
[    15.254] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    15.263] (II) Module nvidia: vendor="NVIDIA Corporation"
[    15.263] 	compiled for 1.6.99.901, module version = 1.0.0
[    15.263] 	Module class: X.Org Video Driver
[    15.264] (II) LoadModule: "modesetting"
[    15.264] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    15.268] (II) Module modesetting: vendor="X.Org Foundation"
[    15.268] 	compiled for 1.21.1.18, module version = 1.21.1
[    15.268] 	Module class: X.Org Video Driver
[    15.268] 	ABI class: X.Org Video Driver, version 25.2
[    15.268] (II) LoadModule: "fbdev"
[    15.268] (WW) Warning, couldn't open module fbdev
[    15.268] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    15.268] (II) LoadModule: "vesa"
[    15.268] (WW) Warning, couldn't open module vesa
[    15.268] (EE) Failed to load module "vesa" (module does not exist, 0)
[    15.268] (II) NVIDIA dlloader X Driver  470.256.02  Thu May  2 14:54:41 UTC 2024
[    15.268] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    15.268] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    15.271] (II) Loading sub module "fb"
[    15.271] (II) LoadModule: "fb"
[    15.271] (II) Module "fb" already built-in
[    15.271] (II) Loading sub module "wfb"
[    15.271] (II) LoadModule: "wfb"
[    15.271] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    15.273] (II) Module wfb: vendor="X.Org Foundation"
[    15.273] 	compiled for 1.21.1.18, module version = 1.0.0
[    15.273] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    15.273] (II) Loading sub module "ramdac"
[    15.273] (II) LoadModule: "ramdac"
[    15.273] (II) Module "ramdac" already built-in
[    15.273] (WW) Falling back to old probe method for modesetting
[    15.275] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    15.275] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    15.275] (==) NVIDIA(0): RGB weight 888
[    15.275] (==) NVIDIA(0): Default visual is TrueColor
[    15.275] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    15.275] (**) NVIDIA(0): Enabling 2D acceleration
[    15.275] (II) Loading sub module "glxserver_nvidia"
[    15.275] (II) LoadModule: "glxserver_nvidia"
[    15.275] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[    15.325] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[    15.325] 	compiled for 1.6.99.901, module version = 1.0.0
[    15.325] 	Module class: X.Org Server Extension
[    15.325] (II) NVIDIA GLX Module  470.256.02  Thu May  2 14:53:31 UTC 2024
[    15.325] (II) NVIDIA: The X server supports PRIME Render Offload.
[    15.327] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[    15.327] (--) NVIDIA(0):     CRT-0
[    15.327] (--) NVIDIA(0):     DFP-0 (boot)
[    15.327] (--) NVIDIA(0):     DFP-1
[    15.327] (--) NVIDIA(0):     DFP-2
[    15.327] (--) NVIDIA(0):     DFP-3
[    15.327] (--) NVIDIA(0):     DFP-4
[    15.327] (--) NVIDIA(0):     DFP-5
[    15.327] (--) NVIDIA(0):     DFP-6
[    15.327] (--) NVIDIA(0):     DFP-7
[    15.327] (II) NVIDIA(0): NVIDIA GPU Quadro K3000M (GK104GL) at PCI:1:0:0 (GPU-0)
[    15.327] (--) NVIDIA(0): Memory: 2097152 kBytes
[    15.327] (--) NVIDIA(0): VideoBIOS: 80.04.33.00.2e
[    15.327] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    15.329] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    15.329] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    15.329] (--) NVIDIA(GPU-0): 
[    15.330] (--) NVIDIA(GPU-0): LGD (DFP-0): connected
[    15.330] (--) NVIDIA(GPU-0): LGD (DFP-0): Internal LVDS
[    15.330] (--) NVIDIA(GPU-0): LGD (DFP-0): 330.0 MHz maximum pixel clock
[    15.330] (--) NVIDIA(GPU-0): 
[    15.330] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    15.330] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    15.330] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    15.330] (--) NVIDIA(GPU-0): 
[    15.331] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    15.331] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[    15.331] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[    15.331] (--) NVIDIA(GPU-0): 
[    15.334] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    15.334] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    15.334] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    15.334] (--) NVIDIA(GPU-0): 
[    15.335] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    15.335] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[    15.335] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[    15.335] (--) NVIDIA(GPU-0): 
[    15.335] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    15.335] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[    15.335] (--) NVIDIA(GPU-0): DFP-5: 960.0 MHz maximum pixel clock
[    15.335] (--) NVIDIA(GPU-0): 
[    15.335] (--) NVIDIA(GPU-0): DFP-6: disconnected
[    15.335] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[    15.335] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[    15.335] (--) NVIDIA(GPU-0): 
[    15.335] (--) NVIDIA(GPU-0): DFP-7: disconnected
[    15.335] (--) NVIDIA(GPU-0): DFP-7: Internal DisplayPort
[    15.335] (--) NVIDIA(GPU-0): DFP-7: 960.0 MHz maximum pixel clock
[    15.335] (--) NVIDIA(GPU-0): 
[    15.336] (==) NVIDIA(0): 
[    15.336] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    15.336] (==) NVIDIA(0):     will be used as the requested mode.
[    15.336] (==) NVIDIA(0): 
[    15.336] (II) NVIDIA(0): Validated MetaModes:
[    15.336] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[    15.336] (II) NVIDIA(0): Virtual screen size determined to be 1600 x 900
[    15.337] (--) NVIDIA(0): DPI set to (106, 108); computed from "UseEdidDpi" X config
[    15.337] (--) NVIDIA(0):     option
[    15.337] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[    15.337] (==) NVIDIA(G0): RGB weight 888
[    15.337] (==) NVIDIA(G0): Default visual is TrueColor
[    15.337] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[    15.337] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    15.337] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[    15.337] (**) NVIDIA(G0): Enabling 2D acceleration
[    15.337] (II) NVIDIA: The X server supports PRIME Render Offload.
[    15.337] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[    15.337] (EE) NVIDIA(G0): Failing initialization of X screen
[    15.337] (II) UnloadModule: "nvidia"
[    15.337] (II) UnloadSubModule: "wfb"
[    15.337] (II) UnloadModule: "modesetting"
[    15.337] (II) Unloading modesetting
[    15.338] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device!
[    15.338] (II) NVIDIA(GPU-1): Deleting GPU-1
[    15.338] (II) NVIDIA: Reserving 6144.00 MB of virtual memory for indirect memory
[    15.338] (II) NVIDIA:     access.
[    15.341] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    15.341] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    15.341] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    15.341] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    15.341] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    15.341] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    15.341] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    15.341] (II) NVIDIA(0):     Config Options in the README.
[    15.363] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[    15.385] (==) NVIDIA(0): Disabling shared memory pixmaps
[    15.385] (==) NVIDIA(0): Backing store enabled
[    15.385] (==) NVIDIA(0): Silken mouse enabled
[    15.385] (==) NVIDIA(0): DPMS enabled
[    15.385] (II) Loading sub module "dri2"
[    15.385] (II) LoadModule: "dri2"
[    15.385] (II) Module "dri2" already built-in
[    15.385] (II) NVIDIA(0): [DRI2] Setup complete
[    15.385] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    15.385] (II) Initializing extension Generic Event Extension
[    15.385] (II) Initializing extension SHAPE
[    15.385] (II) Initializing extension MIT-SHM
[    15.386] (II) Initializing extension XInputExtension
[    15.386] (II) Initializing extension XTEST
[    15.386] (II) Initializing extension BIG-REQUESTS
[    15.386] (II) Initializing extension SYNC
[    15.386] (II) Initializing extension XKEYBOARD
[    15.386] (II) Initializing extension XC-MISC
[    15.386] (II) Initializing extension SECURITY
[    15.386] (II) Initializing extension XFIXES
[    15.386] (II) Initializing extension RENDER
[    15.386] (II) Initializing extension RANDR
[    15.386] (II) Initializing extension COMPOSITE
[    15.387] (II) Initializing extension DAMAGE
[    15.387] (II) Initializing extension MIT-SCREEN-SAVER
[    15.387] (II) Initializing extension DOUBLE-BUFFER
[    15.387] (II) Initializing extension RECORD
[    15.387] (II) Initializing extension DPMS
[    15.387] (II) Initializing extension Present
[    15.387] (II) Initializing extension DRI3
[    15.387] (II) Initializing extension X-Resource
[    15.387] (II) Initializing extension XVideo
[    15.387] (II) Initializing extension XVideo-MotionCompensation
[    15.387] (II) Initializing extension GLX
[    15.387] (II) Initializing extension GLX
[    15.387] (II) Indirect GLX disabled.
[    15.387] (II) GLX: Another vendor is already registered for screen 0
[    15.387] (II) Initializing extension XFree86-VidModeExtension
[    15.387] (II) Initializing extension XFree86-DGA
[    15.387] (II) Initializing extension XFree86-DRI
[    15.387] (II) Initializing extension DRI2
[    15.388] (II) Initializing extension NV-GLX
[    15.388] (II) Initializing extension NV-CONTROL
[    15.388] (II) Initializing extension XINERAMA
[    15.454] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    15.454] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    15.454] (**) Power Button: Applying InputClass "system-keyboard"
[    15.454] (II) LoadModule: "libinput"
[    15.454] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    15.460] (II) Module libinput: vendor="X.Org Foundation"
[    15.460] 	compiled for 1.21.1.13, module version = 1.5.0
[    15.460] 	Module class: X.Org XInput Driver
[    15.460] 	ABI class: X.Org XInput driver, version 24.4
[    15.460] (II) Using input driver 'libinput' for 'Power Button'
[    15.460] (**) Power Button: always reports core events
[    15.460] (**) Option "Device" "/dev/input/event2"
[    15.465] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    15.465] (II) event2  - Power Button: device is a keyboard
[    15.465] (II) event2  - Power Button: device removed
[    15.490] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    15.490] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    15.490] (**) Option "xkb_model" "pc105+inet"
[    15.490] (**) Option "xkb_layout" "us"
[    15.490] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    15.513] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    15.513] (II) event2  - Power Button: device is a keyboard
[    15.513] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    15.513] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    15.513] (**) Video Bus: Applying InputClass "system-keyboard"
[    15.513] (II) Using input driver 'libinput' for 'Video Bus'
[    15.513] (**) Video Bus: always reports core events
[    15.513] (**) Option "Device" "/dev/input/event3"
[    15.514] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    15.514] (II) event3  - Video Bus: device is a keyboard
[    15.514] (II) event3  - Video Bus: device removed
[    15.570] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input3/event3"
[    15.570] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    15.570] (**) Option "xkb_model" "pc105+inet"
[    15.570] (**) Option "xkb_layout" "us"
[    15.570] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    15.571] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    15.571] (II) event3  - Video Bus: device is a keyboard
[    15.572] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    15.572] (II) No input driver specified, ignoring this device.
[    15.572] (II) This device may have been added with another device file.
[    15.572] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    15.572] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    15.572] (**) Sleep Button: Applying InputClass "system-keyboard"
[    15.572] (II) Using input driver 'libinput' for 'Sleep Button'
[    15.572] (**) Sleep Button: always reports core events
[    15.572] (**) Option "Device" "/dev/input/event0"
[    15.573] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    15.573] (II) event0  - Sleep Button: device is a keyboard
[    15.573] (II) event0  - Sleep Button: device removed
[    15.616] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    15.616] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    15.616] (**) Option "xkb_model" "pc105+inet"
[    15.616] (**) Option "xkb_layout" "us"
[    15.617] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    15.619] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    15.619] (II) event0  - Sleep Button: device is a keyboard
[    15.621] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
[    15.621] (II) No input driver specified, ignoring this device.
[    15.622] (II) This device may have been added with another device file.
[    15.622] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event10)
[    15.622] (II) No input driver specified, ignoring this device.
[    15.622] (II) This device may have been added with another device file.
[    15.623] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event11)
[    15.623] (II) No input driver specified, ignoring this device.
[    15.623] (II) This device may have been added with another device file.
[    15.624] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[    15.624] (II) No input driver specified, ignoring this device.
[    15.624] (II) This device may have been added with another device file.
[    15.625] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[    15.625] (II) No input driver specified, ignoring this device.
[    15.625] (II) This device may have been added with another device file.
[    15.625] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event14)
[    15.625] (II) No input driver specified, ignoring this device.
[    15.625] (II) This device may have been added with another device file.
[    15.626] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event15)
[    15.626] (II) No input driver specified, ignoring this device.
[    15.626] (II) This device may have been added with another device file.
[    15.627] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[    15.627] (II) No input driver specified, ignoring this device.
[    15.627] (II) This device may have been added with another device file.
[    15.628] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    15.628] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    15.628] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    15.628] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    15.628] (**) AT Translated Set 2 keyboard: always reports core events
[    15.628] (**) Option "Device" "/dev/input/event4"
[    15.630] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    15.630] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    15.631] (II) event4  - AT Translated Set 2 keyboard: device removed
[    15.673] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    15.673] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    15.673] (**) Option "xkb_model" "pc105+inet"
[    15.673] (**) Option "xkb_layout" "us"
[    15.673] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    15.676] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    15.676] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    15.678] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[    15.678] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    15.678] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    15.678] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    15.678] (**) Option "Device" "/dev/input/event17"
[    15.680] (II) event17 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    15.683] (II) event17 - SynPS/2 Synaptics TouchPad: device is a touchpad
[    15.683] (II) event17 - SynPS/2 Synaptics TouchPad: device removed
[    15.766] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    15.766] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    15.766] (II) libinput: SynPS/2 Synaptics TouchPad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    15.768] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input14/event17"
[    15.768] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[    15.770] (**) Option "AccelerationScheme" "none"
[    15.770] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    15.770] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    15.770] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    15.773] (II) event17 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    15.777] (II) event17 - SynPS/2 Synaptics TouchPad: device is a touchpad
[    15.779] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    15.779] (II) No input driver specified, ignoring this device.
[    15.779] (II) This device may have been added with another device file.
[    15.780] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
[    15.780] (II) No input driver specified, ignoring this device.
[    15.780] (II) This device may have been added with another device file.
[    15.781] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    15.781] (II) No input driver specified, ignoring this device.
[    15.781] (II) This device may have been added with another device file.
[    15.782] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    15.782] (II) No input driver specified, ignoring this device.
[    15.782] (II) This device may have been added with another device file.
[    15.789] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[    15.790] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    15.790] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[    15.790] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[    15.790] (**) HP WMI hotkeys: always reports core events
[    15.790] (**) Option "Device" "/dev/input/event7"
[    15.791] (II) event7  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    15.791] (II) event7  - HP WMI hotkeys: device is a keyboard
[    15.792] (II) event7  - HP WMI hotkeys: device removed
[    15.833] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event7"
[    15.833] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 11)
[    15.833] (**) Option "xkb_model" "pc105+inet"
[    15.833] (**) Option "xkb_layout" "us"
[    15.833] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    15.836] (II) event7  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[    15.836] (II) event7  - HP WMI hotkeys: device is a keyboard
[    15.837] (II) config/udev: Adding input device Wireless hotkeys (/dev/input/event5)
[    15.837] (**) Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[    15.837] (**) Wireless hotkeys: Applying InputClass "system-keyboard"
[    15.837] (II) Using input driver 'libinput' for 'Wireless hotkeys'
[    15.838] (**) Wireless hotkeys: always reports core events
[    15.838] (**) Option "Device" "/dev/input/event5"
[    15.839] (II) event5  - Wireless hotkeys: is tagged by udev as: Keyboard
[    15.839] (II) event5  - Wireless hotkeys: device is a keyboard
[    15.840] (II) event5  - Wireless hotkeys: device removed
[    15.896] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event5"
[    15.896] (II) XINPUT: Adding extended input device "Wireless hotkeys" (type: KEYBOARD, id 12)
[    15.897] (**) Option "xkb_model" "pc105+inet"
[    15.897] (**) Option "xkb_layout" "us"
[    15.897] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    15.899] (II) event5  - Wireless hotkeys: is tagged by udev as: Keyboard
[    15.899] (II) event5  - Wireless hotkeys: device is a keyboard

Last edited by noxar_ad (2025-07-21 08:53:08)

noxar_ad

Member

Registered: 2025-07-04

Posts: 8

Re: [SOLVED] Screen tearing nvidia-470xx-dkms awesomewm

Fixed it through installing nvidia-settings and doing the following.

nvidia-settings-> X Server Display Configuration-> Advanced-> Force Full Composition Pipeline.

Sorry seth for being incompetent, I'll do better.

Last edited by noxar_ad (2025-07-21 10:23:38)