You are not logged in.
Good afternoon to everyone on the forum. I'm writing through a translator. I have a specific problem related to the driver for the AMD Radeon rx570 8GB graphics card. The graphics card is designed for mining and has one DVI-I output on board for connecting a monitor. By default, 1080p resolution has a monitor refresh rate of only 60 Hz, but my monitor supports a frequency of 180 Hz. On Windows, I used a special patch that removed the limitations of the driver for this resolution and the refresh rate was 180 Hz and everything worked smoothly without any comments. The patch is called AMD/ATI Pixel Clock Patcher. Is there a way to remove the limitations of the graphics card driver on Arch?
Offline
Please install read-edid from [extra] repo .
As root / with root-rights run and post the full output of
# get-edid | parse-edidThat will show us details about the capabilities of your monitor.
Are you using X or wayland ?
Last edited by Lone_Wolf (2025-07-10 10:28:39)
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
Please install read-edid from [extra] repo .
As root / with root-rights run and post the full output of# get-edid | parse-edidThat will show us details about the capabilities of your monitor.
Are you using X or wayland ?
Thanks for answer!
[root@sovid-pc sovid]# get-edid | parse-edid
This is read-edid version 3.0.2. Prepare for some fun.
Attempting to use i2c interface
No EDID on bus 0
No EDID on bus 1
No EDID on bus 2
No EDID on bus 3
No EDID on bus 4
No EDID on bus 6
No EDID on bus 7
No EDID on bus 8
Problem requesting slave address: Device or resource busy
No EDID on bus 10
No EDID on bus 11
1 potential busses found: 5
256-byte EDID successfully retrieved from i2c bus 5
Looks like i2c was successful. Have a good day.
Checksum Correct
Section "Monitor"
Identifier "27G15N"
ModelName "27G15N"
VendorName "AOC"
# Monitor Manufactured week 20 of 2024
# EDID version 1.3
# Digital Display
DisplaySize 600 340
Gamma 2.20
Option "DPMS" "true"
Horizsync 30-200
VertRefresh 48-180
# Maximum pixel clock is 600MHz
#Not giving standard mode: 1920x1080, 60Hz
#Not giving standard mode: 1280x1024, 60Hz
#Not giving standard mode: 640x480, 100Hz
#Not giving standard mode: 640x480, 120Hz
#Not giving standard mode: 800x600, 100Hz
#Not giving standard mode: 800x600, 120Hz
#Not giving standard mode: 1024x768, 100Hz
#Not giving standard mode: 1024x768, 120Hz
#Extension block found. Parsing...
#WARNING: I may have missed a mode (CEA mode 63)
Modeline "Mode 12" +hsync +vsync
Modeline "Mode 0" +hsync +vsync
Modeline "Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Modeline "Mode 2" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
Modeline "Mode 3" 74.250 1920 2008 2052 2200 1080 1082 1087 1125 +hsync +vsync interlace
Modeline "Mode 4" 74.250 1920 2448 2492 2640 1080 1082 1089 1125 +hsync +vsync interlace
Modeline "Mode 5" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync +vsync
Modeline "Mode 6" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
Modeline "Mode 7" 27.027 720 736 798 858 480 489 495 525 -hsync -vsync
Modeline "Mode 8" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync
Modeline "Mode 9" 27.027 720 736 798 858 480 489 495 525 -hsync -vsync
Modeline "Mode 10" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync
Modeline "Mode 11" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync
Modeline "Mode 13" +hsync +vsync
Modeline "Mode 14" +hsync +vsync
Option "PreferredMode" "Mode 12"
EndSectionI'm use wayland for KDE Plasma 5.
Last edited by sovid (2025-07-10 11:32:47)
Offline
I guess the 5 is a typo and should be 6 ?
You will need a custom modeline to get that refresh rate. cvt12-git shows these options .
$ cvt12 1920 1080 180
# 1920x1080 @ 180.000 Hz (CVT) field rate 179.977 Hz; hsync: 216.332 kHz; pclk: 581.50 MHz
Modeline "1920x1080_180.00" 581.50 1920 2096 2304 2688 1080 1083 1088 1202 -hsync +vsync
$ cvt12 1920 1080 180 -r
# 1920x1080 @ 180.000 Hz Reduced Blank (CVT) field rate 179.982 Hz; hsync: 212.019 kHz; pclk: 441.00 MHz
Modeline "1920x1080_180.00_rb1" 441.00 1920 1968 2000 2080 1080 1083 1088 1178 +hsync -vsync
$ cvt12 1920 1080 180 -b
# 1920x1080 @ 180.000 Hz Reduced Blank (CVT) field rate 180.000 Hz; hsync: 212.040 kHz; pclk: 424.08 MHz
Modeline "1920x1080_180.00_rb2" 424.08 1920 1928 1960 2000 1080 1164 1172 1178 +hsync -vsync
$ cvt12 1920 1080 180 -b -i
# 1920x1080 @ 180.000 Hz Interlaced Reduced Blank (CVT) field rate 179.999 Hz; hsync: 106.110 kHz; pclk: 212.22 MHz
Modeline "1920x1080_180.00i_rb2" 212.22 1920 1928 1960 2000 1080 1115 1123 1129 Interlace +hsync -vsync
$ Only the last one matches your monitor spec, and interlaced modes have disadvantages .
Some experimentin gwith other refresh rates shows
$ cvt12 1920 1080 160
# 1920x1080 @ 160.000 Hz (CVT) field rate 159.876 Hz; hsync: 189.933 kHz; pclk: 507.50 MHz
Modeline "1920x1080_160.00" 507.50 1920 2088 2296 2672 1080 1083 1088 1188 -hsync +vsync
$Its values are within your monitor specs and don't need reduced blanking OR interlacing.
X has tools to make changing modelines simple, unfortunately wayland doesn't.
I'll have to search how to change modelines for plasma wayland .
Last edited by Lone_Wolf (2025-07-10 12:06:44)
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
I guess the 5 is a typo and should be 6 ?
You will need a custom modeline to get that refresh rate. cvt12-git shows these options .
$ cvt12 1920 1080 180 # 1920x1080 @ 180.000 Hz (CVT) field rate 179.977 Hz; hsync: 216.332 kHz; pclk: 581.50 MHz Modeline "1920x1080_180.00" 581.50 1920 2096 2304 2688 1080 1083 1088 1202 -hsync +vsync $ cvt12 1920 1080 180 -r # 1920x1080 @ 180.000 Hz Reduced Blank (CVT) field rate 179.982 Hz; hsync: 212.019 kHz; pclk: 441.00 MHz Modeline "1920x1080_180.00_rb1" 441.00 1920 1968 2000 2080 1080 1083 1088 1178 +hsync -vsync $ cvt12 1920 1080 180 -b # 1920x1080 @ 180.000 Hz Reduced Blank (CVT) field rate 180.000 Hz; hsync: 212.040 kHz; pclk: 424.08 MHz Modeline "1920x1080_180.00_rb2" 424.08 1920 1928 1960 2000 1080 1164 1172 1178 +hsync -vsync $ cvt12 1920 1080 180 -b -i # 1920x1080 @ 180.000 Hz Interlaced Reduced Blank (CVT) field rate 179.999 Hz; hsync: 106.110 kHz; pclk: 212.22 MHz Modeline "1920x1080_180.00i_rb2" 212.22 1920 1928 1960 2000 1080 1115 1123 1129 Interlace +hsync -vsync $Only the last one matches your monitor spec, and interlaced modes have disadvantages .
Some experimentin gwith other refresh rates shows
$ cvt12 1920 1080 160 # 1920x1080 @ 160.000 Hz (CVT) field rate 159.876 Hz; hsync: 189.933 kHz; pclk: 507.50 MHz Modeline "1920x1080_160.00" 507.50 1920 2088 2296 2672 1080 1083 1088 1188 -hsync +vsync $Its values are within your monitor specs and don't need reduced blanking OR interlacing.
X has tools to make changing modelines simple, unfortunately wayland doesn't.
I'll have to search how to change modelines for plasma wayland .
Thank you, I will be glad of any help!
Offline
Please quote only relevant parts of posts. Quote full posts makes the thread less readable/hard to follow.
https://community.kde.org/Plasma/Waylan … ant_Issues and https://bugs.kde.org/show_bug.cgi?id=456697 confirm neither wayland and plasma-wayland currently have a method to change modelines .
https://wiki.archlinux.org/title/Kernel … s_and_EDID describes a method to override the edid information from the monitor .
Use get-edid to get the raw file, edit it with https://aur.archlinux.org/packages/wxedid .
Changing the values for 1920x1080 to those calculated for 1920x1080x160 is probably the easiest approach.
Is the ADC 27G15N the only monitor you use ?
If not, you will have to ensure only that monitor will use the new edid.
Last edited by Lone_Wolf (2025-07-11 08:08:34)
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
i'm use only AOC 27G15N.
Please, need more info for generated and setting up new EDID. Thanks.
Offline
It's a lot trickier then I thought, using a custom modeline on X is so much easier.
Are you willing to switch to running kde plasma on X11 ?
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
You can straight up copy the relevant edid out of /sys/class/drm/card*/edid (or open it in wxedid), then inject it following https://wiki.archlinux.org/title/Kernel … s_and_EDID
Which of these steps is an obstacle?
using a custom modeline on X is so much easier
ftfy ![]()
Offline
actually editing the EDID.
I've looked further into it and am confused.
There are 2 types of entries with resolution data :
DTD (Detailed Timing Descriptor) and STI (Standard Timing Information) .
STIs appear to describe VESA modes, while DTDs show information that looks like the values in modelines.
wxedid includes a DTD constructor that does show a corresponding X modeline.
That suggests that the modeline needs to be converted to a DTD that is then added just below existing DTD entries.
Can incorrect values in edid damage a monitor or videocard ?
Lone_Wolf wrote:using a custom modeline on X is so much easier
ftfy
As my wayland knowledge/insight increases the probability of switching to it decreases.
Last edited by Lone_Wolf (2025-07-21 10:52:18)
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
Are you willing to switch to running kde plasma on X11 ?
Yes
Offline
Can incorrect values in edid damage a monitor or videocard ?
Certainly not the GPU since it'll have to filter any EDID against its own capacity, but not all panels sanitize modelines (there was a patch to more aggressively filter modelines in mesa or X11 like a year ago because apparently some notebook panels took damage because they allowed to be run out of spec - which might actually run you into a crt error when trying to add the modeline w/ xrandr)
@sovid, have you tried to add the modeline w/ xrandr?
And just as precaution: Can we get the full edid decoded?
for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; doneYou'll need https://archlinux.org/packages/extra/x86_64/v4l-utils/
Offline
@sovid, have you tried to add the modeline w/ xrandr?
No
And just as precaution: Can we get the full edid decoded?
for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; doneYou'll need https://archlinux.org/packages/extra/x86_64/v4l-utils/
[root@sovid-pc sovid]# for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; done
/sys/class/drm/card1
/sys/class/drm/card1/edid: No such file or directory
=================
/sys/class/drm/card1-DP-1
EDID of '/sys/class/drm/card1-DP-1/edid' was empty.
=================
/sys/class/drm/card1-DP-2
EDID of '/sys/class/drm/card1-DP-2/edid' was empty.
=================
/sys/class/drm/card1-DP-3
EDID of '/sys/class/drm/card1-DP-3/edid' was empty.
=================
/sys/class/drm/card1-DVI-D-1
edid-decode (hex):
00 ff ff ff ff ff ff 00 05 e3 15 27 f7 04 00 00
14 22 01 03 80 3c 22 78 2a b6 d5 a5 55 4c 9b 26
0f 50 54 bf ef 00 d1 c0 81 80 31 68 31 7c 45 68
45 7c 61 68 61 7c 02 3a 80 18 71 38 2d 40 58 2c
45 00 56 50 21 00 00 1e 00 00 00 ff 00 41 48 31
35 34 32 30 5a 30 31 32 37 31 00 00 00 fc 00 32
37 47 31 35 4e 0a 20 20 20 20 20 20 00 00 00 fd
00 30 b4 1e c8 3c 00 0a 20 20 20 20 20 20 01 e5
02 03 42 f1 4c 10 1f 05 14 04 13 03 12 02 11 01
3f 23 09 07 07 83 01 00 00 67 03 0c 00 10 00 38
44 67 d8 5d c4 01 78 80 00 6d 1a 00 00 02 01 30
b4 e6 00 00 00 00 00 e6 06 07 01 62 62 1c e3 05
f3 01 57 a2 80 a0 70 38 1e 40 30 40 35 00 56 50
21 00 00 1e 1a 82 80 88 70 38 2d 40 18 20 35 00
56 50 21 00 00 1e 86 6f 80 a0 70 38 40 40 30 20
35 00 56 50 21 00 00 1e 00 00 00 00 00 00 00 3d
----------------
Block 0, Base EDID:
EDID Structure Version & Revision: 1.3
Vendor & Product Identification:
Manufacturer: AOC
Model: 10005
Serial Number: 1271 (0x000004f7)
Made in: week 20 of 2024
Basic Display Parameters & Features:
Digital display
Maximum image size: 60 cm x 34 cm
Gamma: 2.20
DPMS levels: Off
RGB color display
First detailed timing is the preferred timing
Color Characteristics:
Red : 0.6464, 0.3349
Green: 0.2978, 0.6074
Blue : 0.1513, 0.0595
White: 0.3134, 0.3291
Established Timings I & II:
IBM : 720x400 70.081663 Hz 9:5 31.467 kHz 28.320000 MHz
DMT 0x04: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz
Apple : 640x480 66.666667 Hz 4:3 35.000 kHz 30.240000 MHz
DMT 0x05: 640x480 72.808802 Hz 4:3 37.861 kHz 31.500000 MHz
DMT 0x06: 640x480 75.000000 Hz 4:3 37.500 kHz 31.500000 MHz
DMT 0x08: 800x600 56.250000 Hz 4:3 35.156 kHz 36.000000 MHz
DMT 0x09: 800x600 60.316541 Hz 4:3 37.879 kHz 40.000000 MHz
DMT 0x0a: 800x600 72.187572 Hz 4:3 48.077 kHz 50.000000 MHz
DMT 0x0b: 800x600 75.000000 Hz 4:3 46.875 kHz 49.500000 MHz
Apple : 832x624 74.551266 Hz 4:3 49.726 kHz 57.284000 MHz
DMT 0x10: 1024x768 60.003840 Hz 4:3 48.363 kHz 65.000000 MHz
DMT 0x11: 1024x768 70.069359 Hz 4:3 56.476 kHz 75.000000 MHz
DMT 0x12: 1024x768 75.028582 Hz 4:3 60.023 kHz 78.750000 MHz
DMT 0x24: 1280x1024 75.024675 Hz 5:4 79.976 kHz 135.000000 MHz
Standard Timings:
DMT 0x52: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz
DMT 0x23: 1280x1024 60.019740 Hz 5:4 63.981 kHz 108.000000 MHz
GTF : 640x480 99.999537 Hz 4:3 50.900 kHz 43.163000 MHz
GTF : 640x480 119.999084 Hz 4:3 61.800 kHz 52.406000 MHz
GTF : 800x600 99.999707 Hz 4:3 63.600 kHz 68.179000 MHz
GTF : 800x600 119.999886 Hz 4:3 77.160 kHz 83.950000 MHz
GTF : 1024x768 100.000177 Hz 4:3 81.400 kHz 113.309000 MHz
GTF : 1024x768 119.999931 Hz 4:3 98.760 kHz 139.054000 MHz
Detailed Timing Descriptors:
DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (598 mm x 336 mm)
Hfront 88 Hsync 44 Hback 148 Hpol P
Vfront 4 Vsync 5 Vback 36 Vpol P
Display Product Serial Number: 'AH15420Z01271'
Display Product Name: '27G15N'
Display Range Limits:
Monitor ranges (GTF): 48-180 Hz V, 30-200 kHz H, max dotclock 600 MHz
Extension blocks: 1
Checksum: 0xe5
----------------
Block 1, CTA-861 Extension Block:
Revision: 3
Underscans IT Video Formats by default
Basic audio support
Supports YCbCr 4:4:4
Supports YCbCr 4:2:2
Native detailed modes: 1
Video Data Block:
VIC 16: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz
VIC 31: 1920x1080 50.000000 Hz 16:9 56.250 kHz 148.500000 MHz
VIC 5: 1920x1080i 60.000000 Hz 16:9 33.750 kHz 74.250000 MHz
VIC 20: 1920x1080i 50.000000 Hz 16:9 28.125 kHz 74.250000 MHz
VIC 4: 1280x720 60.000000 Hz 16:9 45.000 kHz 74.250000 MHz
VIC 19: 1280x720 50.000000 Hz 16:9 37.500 kHz 74.250000 MHz
VIC 3: 720x480 59.940060 Hz 16:9 31.469 kHz 27.000000 MHz
VIC 18: 720x576 50.000000 Hz 16:9 31.250 kHz 27.000000 MHz
VIC 2: 720x480 59.940060 Hz 4:3 31.469 kHz 27.000000 MHz
VIC 17: 720x576 50.000000 Hz 4:3 31.250 kHz 27.000000 MHz
VIC 1: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz
VIC 63: 1920x1080 120.000000 Hz 16:9 135.000 kHz 297.000000 MHz
Audio Data Block:
Linear PCM:
Max channels: 2
Supported sample rates (kHz): 48 44.1 32
Supported sample sizes (bits): 24 20 16
Speaker Allocation Data Block:
FL/FR - Front Left/Right
Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
Source physical address: 1.0.0.0
DC_36bit
DC_30bit
DC_Y444
Maximum TMDS clock: 340 MHz
Vendor-Specific Data Block (HDMI Forum), OUI C4-5D-D8:
Version: 1
Maximum TMDS Character Rate: 600 MHz
SCDC Present
Vendor-Specific Data Block (AMD), OUI 00-00-1A:
Version: 2
Feature Caps: 0x01
Minimum Refresh Rate: 48 Hz
Maximum Refresh Rate: 180 Hz
Flags 1.x: 0xe6 (MCCS)
Flags 2.x: 0x00
Maximum luminance: 0 (50.000 cd/m^2)
Minimum luminance: 0 (0.000 cd/m^2)
Unknown: 0x00 0x00
HDR Static Metadata Data Block:
Electro optical transfer functions:
Traditional gamma - SDR luminance range
Traditional gamma - HDR luminance range
SMPTE ST2084
Supported static metadata descriptors:
Static metadata type 1
Desired content max luminance: 98 (417.710 cd/m^2)
Desired content max frame-average luminance: 98 (417.710 cd/m^2)
Desired content min luminance: 28 (0.050 cd/m^2)
Colorimetry Data Block:
xvYCC601
xvYCC709
opRGB
BT2020cYCC
BT2020YCC
BT2020RGB
Gamut Boundary Description Metadata Profile P0
Detailed Timing Descriptors:
DTD 2: 1920x1080 180.002599 Hz 16:9 199.803 kHz 415.590000 MHz (598 mm x 336 mm)
Hfront 48 Hsync 64 Hback 48 Hpol P
Vfront 3 Vsync 5 Vback 22 Vpol P
DTD 3: 1920x1080 143.994812 Hz 16:9 161.994 kHz 333.060000 MHz (598 mm x 336 mm)
Hfront 24 Hsync 32 Hback 80 Hpol P
Vfront 3 Vsync 5 Vback 37 Vpol P
DTD 4: 1920x1080 119.982181 Hz 16:9 137.260 kHz 285.500000 MHz (598 mm x 336 mm)
Hfront 48 Hsync 32 Hback 80 Hpol P
Vfront 3 Vsync 5 Vback 56 Vpol P
Checksum: 0x3d Unused space in Extension Block: 7 bytes
=================
/sys/class/drm/card1-HDMI-A-1
EDID of '/sys/class/drm/card1-HDMI-A-1/edid' was empty.
=================Offline
DTD 2: 1920x1080 180.002599 Hz 16:9 199.803 kHz 415.590000 MHz (598 mm x 336 mm)
Hfront 48 Hsync 64 Hback 48 Hpol P
Vfront 3 Vsync 5 Vback 22 Vpol PThe modeline is there. You don't have to patch anything.
On X11, what's the output of "xrandr --verbose" (running this on wayland is pointless - you're talking to an X11 emulation only there)
Also please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General (the file, don't copypaste the completely random example in the blue box)
Offline
On X11, what's the output of "xrandr --verbose" (running this on wayland is pointless - you're talking to an X11 emulation only there)
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x54
Timestamp: 8339
Subpixel: unknown
Clones:
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
TearFree: auto
supported: off, on, auto
subconnector: Unknown
supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
vrr_capable: 0
range: (0, 1)
Colorspace: Default
supported: Default, BT709_YCC, opRGB, BT2020_RGB, BT2020_YCC
max bpc: 16
range: (8, 16)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
scaling mode: None
supported: None, Full, Center, Full aspect
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 77
supported: 77
non-desktop: 0
range: (0, 1)
DisplayPort-1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x55
Timestamp: 8339
Subpixel: unknown
Clones:
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
TearFree: auto
supported: off, on, auto
subconnector: Unknown
supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
vrr_capable: 0
range: (0, 1)
Colorspace: Default
supported: Default, BT709_YCC, opRGB, BT2020_RGB, BT2020_YCC
max bpc: 16
range: (8, 16)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
scaling mode: None
supported: None, Full, Center, Full aspect
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 84
supported: 84
non-desktop: 0
range: (0, 1)
DisplayPort-2 disconnected (normal left inverted right x axis y axis)
Identifier: 0x56
Timestamp: 8339
Subpixel: unknown
Clones:
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
TearFree: auto
supported: off, on, auto
subconnector: Unknown
supported: Unknown, VGA, DVI-D, HDMI, DP, Wireless, Native
vrr_capable: 0
range: (0, 1)
Colorspace: Default
supported: Default, BT709_YCC, opRGB, BT2020_RGB, BT2020_YCC
max bpc: 16
range: (8, 16)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
scaling mode: None
supported: None, Full, Center, Full aspect
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 90
supported: 90
non-desktop: 0
range: (0, 1)
HDMI-A-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x57
Timestamp: 8339
Subpixel: unknown
Clones:
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
TearFree: auto
supported: off, on, auto
vrr_capable: 0
range: (0, 1)
Colorspace: Default
supported: Default, BT709_YCC, opRGB, BT2020_RGB, BT2020_YCC
content type: No Data
supported: No Data, Graphics, Photo, Cinema, Game
max bpc: 16
range: (8, 16)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
scaling mode: None
supported: None, Full, Center, Full aspect
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 96
supported: 96
non-desktop: 0
range: (0, 1)
DVI-D-0 connected primary 1920x1080+0+0 (0x5a) normal (normal left inverted right x axis y axis) 598mm x 336mm
Identifier: 0x58
Timestamp: 8339
Subpixel: unknown
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 0
CRTCs: 0 1 2 3 4 5
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
_KDE_SCREEN_INDEX: 1
EDID:
00ffffffffffff0005e31527f7040000
14220103803c22782ab6d5a5554c9b26
0f5054bfef00d1c081803168317c4568
457c6168617c023a801871382d40582c
450056502100001e000000ff00414831
353432305a3031323731000000fc0032
374731354e0a202020202020000000fd
0030b41ec83c000a20202020202001e5
020342f14c101f051404130312021101
3f230907078301000067030c00100038
4467d85dc4017880006d1a0000020130
b4e60000000000e606070162621ce305
f30157a280a070381e40304035005650
2100001e1a82808870382d4018203500
56502100001e866f80a0703840403020
350056502100001e000000000000003d
TearFree: auto
supported: off, on, auto
max bpc: 16
range: (8, 16)
underscan vborder: 0
range: (0, 128)
underscan hborder: 0
range: (0, 128)
underscan: off
supported: off, on, auto
scaling mode: None
supported: None, Full, Center, Full aspect
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 103
supported: 103
non-desktop: 0
range: (0, 1)
1920x1080 (0x5a) 148.500MHz +HSync +VSync *current +preferred
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.50KHz
v: height 1080 start 1084 end 1089 total 1125 clock 60.00Hz
1920x1080 (0x5b) 297.000MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 135.00KHz
v: height 1080 start 1084 end 1089 total 1125 clock 120.00Hz
1920x1080 (0x5c) 296.703MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 134.87KHz
v: height 1080 start 1084 end 1089 total 1125 clock 119.88Hz
1920x1080 (0x5d) 285.500MHz +HSync +VSync
h: width 1920 start 1968 end 2000 total 2080 skew 0 clock 137.26KHz
v: height 1080 start 1083 end 1088 total 1144 clock 119.98Hz
1920x1080 (0x5e) 148.500MHz +HSync +VSync
h: width 1920 start 2448 end 2492 total 2640 skew 0 clock 56.25KHz
v: height 1080 start 1084 end 1089 total 1125 clock 50.00Hz
1920x1080 (0x5f) 148.352MHz +HSync +VSync
h: width 1920 start 2008 end 2052 total 2200 skew 0 clock 67.43KHz
v: height 1080 start 1084 end 1089 total 1125 clock 59.94Hz
1680x1050 (0x60) 148.500MHz +HSync +VSync
h: width 1680 start 2008 end 2052 total 2200 skew 0 clock 67.50KHz
v: height 1050 start 1084 end 1089 total 1125 clock 60.00Hz
1280x1024 (0x61) 135.000MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 79.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.02Hz
1280x1024 (0x62) 108.000MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 63.98KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.02Hz
1440x900 (0x63) 148.500MHz +HSync +VSync
h: width 1440 start 2008 end 2052 total 2200 skew 0 clock 67.50KHz
v: height 900 start 1084 end 1089 total 1125 clock 60.00Hz
1280x800 (0x64) 148.500MHz +HSync +VSync
h: width 1280 start 2008 end 2052 total 2200 skew 0 clock 67.50KHz
v: height 800 start 1084 end 1089 total 1125 clock 60.00Hz
1280x720 (0x65) 74.250MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 45.00KHz
v: height 720 start 725 end 730 total 750 clock 60.00Hz
1280x720 (0x66) 74.250MHz +HSync +VSync
h: width 1280 start 1720 end 1760 total 1980 skew 0 clock 37.50KHz
v: height 720 start 725 end 730 total 750 clock 50.00Hz
1280x720 (0x67) 74.176MHz +HSync +VSync
h: width 1280 start 1390 end 1430 total 1650 skew 0 clock 44.96KHz
v: height 720 start 725 end 730 total 750 clock 59.94Hz
1024x768 (0x68) 115.500MHz +HSync -VSync
h: width 1024 start 1072 end 1104 total 1184 skew 0 clock 97.55KHz
v: height 768 start 771 end 775 total 813 clock 119.99Hz
1024x768 (0x69) 113.274MHz -HSync +VSync
h: width 1024 start 1096 end 1208 total 1392 skew 0 clock 81.38KHz
v: height 768 start 769 end 772 total 814 clock 99.97Hz
1024x768 (0x6a) 78.750MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.02KHz
v: height 768 start 769 end 772 total 800 clock 75.03Hz
1024x768 (0x6b) 75.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.48KHz
v: height 768 start 771 end 777 total 806 clock 70.07Hz
1024x768 (0x6c) 65.000MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.36KHz
v: height 768 start 771 end 777 total 806 clock 60.00Hz
832x624 (0x6d) 57.284MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.73KHz
v: height 624 start 625 end 628 total 667 clock 74.55Hz
800x600 (0x6e) 73.250MHz +HSync -VSync
h: width 800 start 848 end 880 total 960 skew 0 clock 76.30KHz
v: height 600 start 603 end 607 total 636 clock 119.97Hz
800x600 (0x6f) 68.175MHz -HSync +VSync
h: width 800 start 848 end 936 total 1072 skew 0 clock 63.60KHz
v: height 600 start 601 end 604 total 636 clock 99.99Hz
800x600 (0x70) 50.000MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.08KHz
v: height 600 start 637 end 643 total 666 clock 72.19Hz
800x600 (0x71) 49.500MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.88KHz
v: height 600 start 601 end 604 total 625 clock 75.00Hz
800x600 (0x72) 40.000MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.88KHz
v: height 600 start 601 end 605 total 628 clock 60.32Hz
800x600 (0x73) 36.000MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.16KHz
v: height 600 start 601 end 603 total 625 clock 56.25Hz
720x576 (0x74) 27.000MHz -HSync -VSync
h: width 720 start 732 end 796 total 864 skew 0 clock 31.25KHz
v: height 576 start 581 end 586 total 625 clock 50.00Hz
720x480 (0x75) 27.027MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.50KHz
v: height 480 start 489 end 495 total 525 clock 60.00Hz
720x480 (0x76) 27.000MHz -HSync -VSync
h: width 720 start 736 end 798 total 858 skew 0 clock 31.47KHz
v: height 480 start 489 end 495 total 525 clock 59.94Hz
640x480 (0x77) 52.404MHz -HSync +VSync
h: width 640 start 680 end 744 total 848 skew 0 clock 61.80KHz
v: height 480 start 481 end 484 total 515 clock 119.99Hz
640x480 (0x78) 43.162MHz -HSync +VSync
h: width 640 start 680 end 744 total 848 skew 0 clock 50.90KHz
v: height 480 start 481 end 484 total 509 clock 100.00Hz
640x480 (0x79) 31.500MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.50KHz
v: height 480 start 481 end 484 total 500 clock 75.00Hz
640x480 (0x7a) 31.500MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.86KHz
v: height 480 start 489 end 492 total 520 clock 72.81Hz
640x480 (0x7b) 30.240MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.00KHz
v: height 480 start 483 end 486 total 525 clock 66.67Hz
640x480 (0x7c) 25.200MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.50KHz
v: height 480 start 490 end 492 total 525 clock 60.00Hz
640x480 (0x7d) 25.175MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.47KHz
v: height 480 start 490 end 492 total 525 clock 59.94Hz
720x400 (0x7e) 28.320MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.47KHz
v: height 400 start 412 end 414 total 449 clock 70.08HzAlso please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General (the file, don't copypaste the completely random example in the blue box)
tail -f /var/log/Xorg.0.log
[ 174.973] (II) AMDGPU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 174.973] (II) AMDGPU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 174.973] (II) AMDGPU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 174.973] (II) AMDGPU(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 -hsync +vsync (50.9 kHz e)
[ 174.973] (II) AMDGPU(0): Modeline "640x480"x120.0 52.41 640 680 744 848 480 481 484 515 -hsync +vsync (61.8 kHz e)
[ 174.973] (II) AMDGPU(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz e)
[ 174.973] (II) AMDGPU(0): Modeline "800x600"x0.0 73.25 800 848 880 960 600 603 607 636 +hsync -vsync (76.3 kHz e)
[ 174.973] (II) AMDGPU(0): Modeline "1024x768"x100.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz e)
[ 174.973] (II) AMDGPU(0): Modeline "1024x768"x0.0 115.50 1024 1072 1104 1184 768 771 775 813 +hsync -vsync (97.6 kHz e)
[ 174.973] (--) AMDGPU(0): HDMI max TMDS frequency 340000KHz
tail -f /var/log/Xorg.1.log
[ 12442.398] (II) UnloadModule: "libinput"
[ 12442.398] (II) UnloadModule: "libinput"
[ 12442.398] (II) UnloadModule: "libinput"
[ 12442.398] (II) UnloadModule: "libinput"
[ 12442.398] (II) UnloadModule: "libinput"
[ 12442.398] (II) UnloadModule: "libinput"
[ 12442.398] (II) UnloadModule: "libinput"
[ 12442.398] (II) UnloadModule: "libinput"
[ 12442.398] (II) UnloadModule: "libinput"
[ 12442.440] (II) Server terminated successfully (0). Closing log file.
tail -f /var/log/Xorg.2.log
[ 17111.455] (II) UnloadModule: "libinput"
[ 17111.455] (II) UnloadModule: "libinput"
[ 17111.455] (II) UnloadModule: "libinput"
[ 17111.455] (II) UnloadModule: "libinput"
[ 17111.455] (II) UnloadModule: "libinput"
[ 17111.455] (II) UnloadModule: "libinput"
[ 17111.455] (II) UnloadModule: "libinput"
[ 17111.455] (II) UnloadModule: "libinput"
[ 17111.455] (II) UnloadModule: "libinput"
[ 17111.457] (II) Server terminated successfully (0). Closing log file.Offline
the file, don't copypaste the completely random example in the blue box
What am I supposed to do w/ that tail?![]()
However:
xrandr --output DVI-D-0 --mode 0x5dDoes the 120HZ mode work?
Can you btw. use a display port connection?
DL-DVI is limited to 330MHz, so unsurprisingly the 440MHz modeline will get filtered there and I'm not sure how you'd do this on windows except
1. windows lied
2. you were using an interlaced mode
DVI cannot transmit 1080p@180HZ
Offline
seth wrote:the file, don't copypaste the completely random example in the blue box
What am I supposed to do w/ that tail?
However:
xrandr --output DVI-D-0 --mode 0x5dDoes the 120HZ mode work?
Can you btw. use a display port connection?
At 120Hz there are artifacts as if the image sharpness has increased along with blurring. And yes, the video card has only one DVI-D output
Offline
as if the image sharpness has increased along with blurring
Errrr… wut?
And yes, the video card has only one DVI-D output
Errrr… wut?
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
DisplayPort-1 disconnected (normal left inverted right x axis y axis)
DisplayPort-2 disconnected (normal left inverted right x axis y axis)
HDMI-A-0 disconnected (normal left inverted right x axis y axis)I meant, they technically all could™ be not wired to any jack, I guess. Which kinda sucks.
$ cvt12 1920 1080 180 -b -i
# 1920x1080 @ 180.000 Hz Interlaced Reduced Blank (CVT) field rate 179.999 Hz; hsync: 106.110 kHz; pclk: 212.22 MHz
Modeline "1920x1080_180.00i_rb2" 212.22 1920 1928 1960 2000 1080 1115 1123 1129 Interlace +hsync -vsyncIs your only realistic option, provided the output supports that mode (it's not in the edid) - not sure whether that's gonna be a huge improvement (though you'd be at 90Hz progressive, just rendered interlaced…)
Offline