You are not logged in.

Pages: 1

#1 2025-08-15 11:57:00

PYL29
Member
Registered: 2025-08-15
Posts: 5

[SOLVED]SDDM stuck on blinking cursor

I updated my system and after a restart, SDDM refused to show and stuck at blinking cursor. Manually starting kde on another tty works and systemctl status sddm shows no errors.

Last edited by PYL29 (2025-08-15 14:01:47)

Offline

#2 2025-08-15 12:30:45

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,650

Re: [SOLVED]SDDM stuck on blinking cursor

Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General (unless you've configured SDDM to run on a wayland compositor in which case you'll have to elaborate on that)
Just in case: the 580xx nvidia drivers has quite some problems, one of them apparently being complete vulkan failure…

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2025-08-15 13:14:38

PYL29
Member
Registered: 2025-08-15
Posts: 5

Re: [SOLVED]SDDM stuck on blinking cursor

Here is the log:

[     5.633] (--) Log file renamed from "/var/log/Xorg.pid-759.log" to "/var/log/Xorg.0.log"
[     5.635] 
X.Org X Server 1.21.1.18
X Protocol Version 11, Revision 0
[     5.635] Current Operating System: Linux atalayb-arch 6.16.0-arch2-1 #1 SMP PREEMPT_DYNAMIC Wed, 13 Aug 2025 23:38:48 +0000 x86_64
[     5.635] Kernel command line: initrd=\arch\boot\x86_64\initramfs-linux.img archisobasedir=arch archisosearchuuid=2025-07-01-17-34-06-00
[     5.635]  
[     5.635] Current version of pixman: 0.46.4
[     5.635]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[     5.635] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.635] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 15 16:09:26 2025
[     5.637] (==) Using config file: "/etc/X11/xorg.conf"
[     5.637] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.638] (==) ServerLayout "Layout0"
[     5.638] (**) |-->Screen "Screen0" (0)
[     5.638] (**) |   |-->Monitor "Monitor0"
[     5.638] (**) |   |-->Device "Device0"
[     5.638] (**) |-->Input Device "Keyboard0"
[     5.638] (**) |-->Input Device "Mouse0"
[     5.638] (**) Allowing byte-swapped clients
[     5.638] (==) Automatically adding devices
[     5.638] (==) Automatically enabling devices
[     5.638] (==) Automatically adding GPU devices
[     5.638] (==) Automatically binding GPU devices
[     5.638] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.639] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[     5.639]    Entry deleted from font path.
[     5.639]    (Run 'mkfontdir' on "/usr/share/fonts/misc").
[     5.639] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[     5.639]    Entry deleted from font path.
[     5.639]    (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[     5.639] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     5.639]    Entry deleted from font path.
[     5.639] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     5.639]    Entry deleted from font path.
[     5.639] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     5.639]    Entry deleted from font path.
[     5.639] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     5.639]    Entry deleted from font path.
[     5.639] (==) FontPath set to:

[     5.639] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.639] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     5.639] (WW) Disabling Keyboard0
[     5.639] (WW) Disabling Mouse0
[     5.639] (II) Module ABI versions:
[     5.639]    X.Org ANSI C Emulation: 0.4
[     5.639]    X.Org Video Driver: 25.2
[     5.639]    X.Org XInput driver : 24.4
[     5.639]    X.Org Server Extension : 10.0
[     5.640] (++) using VT number 2

[     5.640] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.640] (II) xfree86: Adding drm device (/dev/dri/card1)
[     5.640] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[     5.642] (--) PCI:*(0@0:2:0) 8086:a7a0:1d05:1243 rev 4, Mem @ 0x6202000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[     5.642] (--) PCI: (1@0:0:0) 10de:28a1:1d05:1243 rev 161, Mem @ 0x81000000/16777216, 0x6000000000/8589934592, 0x6200000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[     5.642] (II) LoadModule: "glx"
[     5.643] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.648] (II) Module glx: vendor="X.Org Foundation"
[     5.648]    compiled for 1.21.1.18, module version = 1.0.0
[     5.648]    ABI class: X.Org Server Extension, version 10.0
[     5.648] (II) LoadModule: "nvidia"
[     5.648] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     5.652] (II) Module nvidia: vendor="NVIDIA Corporation"
[     5.652]    compiled for 1.6.99.901, module version = 1.0.0
[     5.652]    Module class: X.Org Video Driver
[     5.652] (II) NVIDIA dlloader X Driver  580.76.05  Thu Aug  7 19:59:47 UTC 2025
[     5.652] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     5.657] (II) Loading sub module "fb"
[     5.657] (II) LoadModule: "fb"
[     5.657] (II) Module "fb" already built-in
[     5.657] (II) Loading sub module "wfb"
[     5.657] (II) LoadModule: "wfb"
[     5.657] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     5.657] (II) Module wfb: vendor="X.Org Foundation"
[     5.657]    compiled for 1.21.1.18, module version = 1.0.0
[     5.657]    ABI class: X.Org ANSI C Emulation, version 0.4
[     5.985] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     5.985] (==) NVIDIA(0): RGB weight 888
[     5.985] (==) NVIDIA(0): Default visual is TrueColor
[     5.985] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.998] (**) NVIDIA(0): Enabling 2D acceleration
[     5.998] (II) Loading sub module "glxserver_nvidia"
[     5.998] (II) LoadModule: "glxserver_nvidia"
[     5.998] (WW) Warning, couldn't open module glxserver_nvidia
[     5.998] (EE) NVIDIA: Failed to load module "glxserver_nvidia" (module does not exist, 0)
[     5.998] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[     5.998] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[     5.998] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[     5.998] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[     5.998] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.
[     5.998] (II) NVIDIA: The X server does not support PRIME Render Offload.
[     6.136] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     6.136] (--) NVIDIA(0):     DFP-0
[     6.136] (--) NVIDIA(0):     DFP-1
[     6.136] (--) NVIDIA(0):     DFP-2
[     6.136] (--) NVIDIA(0):     DFP-3
[     6.145] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 4050 Laptop GPU (AD107-A) at
[     6.145] (II) NVIDIA(0):     PCI:1:0:0 (GPU-0)
[     6.145] (--) NVIDIA(0): Memory: 6288384 kBytes
[     6.145] (--) NVIDIA(0): VideoBIOS: 95.07.19.00.38
[     6.145] (II) NVIDIA(0): Detected PCI Express Link width: 8X
[     6.145] (--) NVIDIA(GPU-0): DFP-0: disconnected
[     6.145] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[     6.145] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[     6.145] (--) NVIDIA(GPU-0): 
[     6.145] (--) NVIDIA(GPU-0): DFP-1: disconnected
[     6.145] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[     6.145] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[     6.145] (--) NVIDIA(GPU-0): 
[     6.145] (--) NVIDIA(GPU-0): DFP-2: disconnected
[     6.145] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[     6.145] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[     6.145] (--) NVIDIA(GPU-0): 
[     6.145] (--) NVIDIA(GPU-0): DFP-3: disconnected
[     6.145] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[     6.145] (--) NVIDIA(GPU-0): DFP-3: 2670.0 MHz maximum pixel clock
[     6.145] (--) NVIDIA(GPU-0): 
[     6.145] (==) NVIDIA(0): 
[     6.145] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     6.145] (==) NVIDIA(0):     will be used as the requested mode.
[     6.145] (==) NVIDIA(0): 
[     6.145] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[     6.145] (--) NVIDIA(0):     AllowEmptyInitialConfiguration is enabled
[     6.149] (II) NVIDIA(0): Validated MetaModes:
[     6.149] (II) NVIDIA(0):     "NULL"
[     6.149] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[     6.149] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[     6.149] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[     6.149] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[     6.149] (II) NVIDIA:     access.
[     6.155] (WW) NVIDIA(0): ACPI: failed to determine the system's current power source
[     6.155] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     6.155] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     6.155] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     6.155] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     6.155] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     6.155] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     6.155] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     6.155] (II) NVIDIA(0):     Config Options in the README.
[     6.167] (II) NVIDIA(0): Setting mode "NULL"
[     6.187] (==) NVIDIA(0): Disabling shared memory pixmaps
[     6.187] (==) NVIDIA(0): Backing store enabled
[     6.187] (==) NVIDIA(0): Silken mouse enabled
[     6.188] (**) NVIDIA(0): DPMS enabled
[     6.188] (II) Loading sub module "dri2"
[     6.188] (II) LoadModule: "dri2"
[     6.188] (II) Module "dri2" already built-in
[     6.188] (II) NVIDIA(0): [DRI2] Setup complete
[     6.188] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     6.188] (II) Initializing extension Generic Event Extension
[     6.188] (II) Initializing extension SHAPE
[     6.189] (II) Initializing extension MIT-SHM
[     6.189] (II) Initializing extension XInputExtension
[     6.189] (II) Initializing extension XTEST
[     6.189] (II) Initializing extension BIG-REQUESTS
[     6.189] (II) Initializing extension SYNC
[     6.189] (II) Initializing extension XKEYBOARD
[     6.189] (II) Initializing extension XC-MISC
[     6.189] (II) Initializing extension SECURITY
[     6.189] (II) Initializing extension XFIXES
[     6.189] (II) Initializing extension RENDER
[     6.189] (II) Initializing extension RANDR
[     6.189] (II) Initializing extension COMPOSITE
[     6.189] (II) Initializing extension DAMAGE
[     6.189] (II) Initializing extension MIT-SCREEN-SAVER
[     6.189] (II) Initializing extension DOUBLE-BUFFER
[     6.189] (II) Initializing extension RECORD
[     6.189] (II) Initializing extension DPMS
[     6.189] (II) Initializing extension Present
[     6.189] (II) Initializing extension DRI3
[     6.189] (II) Initializing extension X-Resource
[     6.189] (II) Initializing extension XVideo
[     6.189] (II) Initializing extension XVideo-MotionCompensation
[     6.189] (II) Initializing extension GLX
[     6.190] (II) AIGLX: Screen 0 is not DRI2 capable
[     6.431] (II) IGLX: Loaded and initialized swrast
[     6.431] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     6.431] (II) Initializing extension XFree86-VidModeExtension
[     6.431] (II) Initializing extension XFree86-DGA
[     6.431] (II) Initializing extension XFree86-DRI
[     6.431] (II) Initializing extension DRI2
[     6.431] (II) Initializing extension NV-GLX
[     6.431] (II) Initializing extension NV-CONTROL
[     6.463] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[     6.463] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.463] (II) LoadModule: "libinput"
[     6.463] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.464] (II) Module libinput: vendor="X.Org Foundation"
[     6.464]    compiled for 1.21.1.13, module version = 1.5.0
[     6.464]    Module class: X.Org XInput Driver
[     6.464]    ABI class: X.Org XInput driver, version 24.4
[     6.464] (II) Using input driver 'libinput' for 'Video Bus'
[     6.464] (**) Video Bus: always reports core events
[     6.464] (**) Option "Device" "/dev/input/event10"
[     6.467] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[     6.467] (II) event10 - Video Bus: device is a keyboard
[     6.467] (II) event10 - Video Bus: device removed
[     6.491] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11/event10"
[     6.491] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[     6.492] (II) event10 - Video Bus: is tagged by udev as: Keyboard
[     6.492] (II) event10 - Video Bus: device is a keyboard
[     6.494] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[     6.494] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.494] (II) Using input driver 'libinput' for 'Video Bus'
[     6.494] (**) Video Bus: always reports core events
[     6.494] (**) Option "Device" "/dev/input/event8"
[     6.495] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[     6.495] (II) event8  - Video Bus: device is a keyboard
[     6.495] (II) event8  - Video Bus: device removed
[     6.515] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input10/event8"
[     6.515] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.517] (II) event8  - Video Bus: is tagged by udev as: Keyboard
[     6.517] (II) event8  - Video Bus: device is a keyboard
[     6.518] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     6.518] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.518] (II) Using input driver 'libinput' for 'Power Button'
[     6.518] (**) Power Button: always reports core events
[     6.518] (**) Option "Device" "/dev/input/event1"
[     6.519] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.519] (II) event1  - Power Button: device is a keyboard
[     6.519] (II) event1  - Power Button: device removed
[     6.534] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     6.534] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     6.535] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.536] (II) event1  - Power Button: device is a keyboard
[     6.536] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[     6.536] (II) No input driver specified, ignoring this device.
[     6.536] (II) This device may have been added with another device file.
[     6.537] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     6.537] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     6.537] (II) Using input driver 'libinput' for 'Sleep Button'
[     6.537] (**) Sleep Button: always reports core events
[     6.537] (**) Option "Device" "/dev/input/event0"
[     6.538] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     6.538] (II) event0  - Sleep Button: device is a keyboard
[     6.538] (II) event0  - Sleep Button: device removed
[     6.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[     6.548] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     6.549] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     6.549] (II) event0  - Sleep Button: device is a keyboard
[     6.550] (II) config/udev: Adding drm device (/dev/dri/card0)
[     6.550] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.550] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[     6.550] (II) LoadModule: "modesetting"
[     6.550] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     6.552] (II) Module modesetting: vendor="X.Org Foundation"
[     6.552]    compiled for 1.21.1.18, module version = 1.21.1
[     6.552]    Module class: X.Org Video Driver
[     6.552]    ABI class: X.Org Video Driver, version 25.2
[     6.552] (II) modeset(G0): using drv /dev/dri/card0
[     6.553] (**) modeset(G0): Depth 24, (--) framebuffer bpp 32
[     6.553] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[     6.553] (==) modeset(G0): RGB weight 888
[     6.553] (==) modeset(G0): Default visual is TrueColor
[     6.553] (II) Loading sub module "glamoregl"
[     6.553] (II) LoadModule: "glamoregl"
[     6.553] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     6.561] (II) Module glamoregl: vendor="X.Org Foundation"
[     6.561]    compiled for 1.21.1.18, module version = 1.0.1
[     6.561]    ABI class: X.Org ANSI C Emulation, version 0.4
[     6.623] (II) modeset(G0): glamor X acceleration enabled on NVIDIA GeForce RTX 4050 Laptop GPU/PCIe/SSE2
[     6.623] (II) modeset(G0): glamor initialized
[     6.623] (II) modeset(G0): Output DP-1-1 using monitor section Monitor0
[     6.623] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[     6.623] (II) modeset(G0): Output eDP-1-2 has no monitor section
[     6.623] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[     6.623] (==) modeset(G0): DPI set to (96, 96)
[     6.623] (II) Loading sub module "fb"
[     6.623] (II) LoadModule: "fb"
[     6.623] (II) Module "fb" already built-in
[     6.623] (EE) modeset(G0): drmSetMaster failed: Device or resource busy
[     6.624] (II) UnloadModule: "modesetting"
[     6.624] (II) UnloadSubModule: "glamoregl"
[     6.624] (II) Unloading glamoregl
[     6.624] xf86: found device 1
[     6.624] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event21)
[     6.624] (II) No input driver specified, ignoring this device.
[     6.624] (II) This device may have been added with another device file.
[     6.624] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event22)
[     6.624] (II) No input driver specified, ignoring this device.
[     6.624] (II) This device may have been added with another device file.
[     6.625] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event23)
[     6.625] (II) No input driver specified, ignoring this device.
[     6.625] (II) This device may have been added with another device file.
[     6.625] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event24)
[     6.625] (II) No input driver specified, ignoring this device.
[     6.625] (II) This device may have been added with another device file.
[     6.625] (II) config/udev: Adding input device Compx 2.4G Receiver (/dev/input/event4)
[     6.625] (**) Compx 2.4G Receiver: Applying InputClass "libinput keyboard catchall"
[     6.625] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver'
[     6.625] (**) Compx 2.4G Receiver: always reports core events
[     6.625] (**) Option "Device" "/dev/input/event4"
[     6.625] (II) event4  - Compx 2.4G Receiver: is tagged by udev as: Keyboard
[     6.625] (II) event4  - Compx 2.4G Receiver: device is a keyboard
[     6.625] (II) event4  - Compx 2.4G Receiver: device removed
[     6.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:25A7:FA23.0001/input/input4/event4"
[     6.640] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver" (type: KEYBOARD, id 10)
[     6.640] (II) event4  - Compx 2.4G Receiver: is tagged by udev as: Keyboard
[     6.640] (II) event4  - Compx 2.4G Receiver: device is a keyboard
[     6.640] (II) config/udev: Adding input device Compx 2.4G Receiver Mouse (/dev/input/event5)
[     6.640] (**) Compx 2.4G Receiver Mouse: Applying InputClass "libinput pointer catchall"
[     6.640] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Mouse'
[     6.640] (**) Compx 2.4G Receiver Mouse: always reports core events
[     6.640] (**) Option "Device" "/dev/input/event5"
[     6.641] (II) event5  - Compx 2.4G Receiver Mouse: is tagged by udev as: Mouse
[     6.641] (II) event5  - Compx 2.4G Receiver Mouse: device is a pointer
[     6.641] (II) event5  - Compx 2.4G Receiver Mouse: device removed
[     6.661] (II) libinput: Compx 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[     6.661] (II) libinput: Compx 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[     6.661] (II) libinput: Compx 2.4G Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[     6.661] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:FA23.0002/input/input5/event5"
[     6.661] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver Mouse" (type: MOUSE, id 11)
[     6.661] (**) Option "AccelerationScheme" "none"
[     6.661] (**) Compx 2.4G Receiver Mouse: (accel) selected scheme none/0
[     6.661] (**) Compx 2.4G Receiver Mouse: (accel) acceleration factor: 2.000
[     6.661] (**) Compx 2.4G Receiver Mouse: (accel) acceleration threshold: 4
[     6.663] (II) event5  - Compx 2.4G Receiver Mouse: is tagged by udev as: Mouse
[     6.663] (II) event5  - Compx 2.4G Receiver Mouse: device is a pointer
[     6.664] (II) config/udev: Adding input device Compx 2.4G Receiver Mouse (/dev/input/mouse0)
[     6.664] (II) No input driver specified, ignoring this device.
[     6.664] (II) This device may have been added with another device file.
[     6.665] (II) config/udev: Adding input device Compx 2.4G Receiver (/dev/input/event6)
[     6.665] (II) No input driver specified, ignoring this device.
[     6.665] (II) This device may have been added with another device file.
[     6.665] (II) config/udev: Adding input device Compx 2.4G Receiver Consumer Control (/dev/input/event7)
[     6.665] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.665] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Consumer Control'
[     6.665] (**) Compx 2.4G Receiver Consumer Control: always reports core events
[     6.665] (**) Option "Device" "/dev/input/event7"
[     6.666] (II) event7  - Compx 2.4G Receiver Consumer Control: is tagged by udev as: Keyboard
[     6.667] (II) event7  - Compx 2.4G Receiver Consumer Control: device is a keyboard
[     6.667] (II) event7  - Compx 2.4G Receiver Consumer Control: device removed
[     6.684] (II) libinput: Compx 2.4G Receiver Consumer Control: needs a virtual subdevice
[     6.684] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:FA23.0002/input/input7/event7"
[     6.684] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver Consumer Control" (type: MOUSE, id 12)
[     6.684] (**) Option "AccelerationScheme" "none"
[     6.684] (**) Compx 2.4G Receiver Consumer Control: (accel) selected scheme none/0
[     6.684] (**) Compx 2.4G Receiver Consumer Control: (accel) acceleration factor: 2.000
[     6.684] (**) Compx 2.4G Receiver Consumer Control: (accel) acceleration threshold: 4
[     6.686] (II) event7  - Compx 2.4G Receiver Consumer Control: is tagged by udev as: Keyboard
[     6.687] (II) event7  - Compx 2.4G Receiver Consumer Control: device is a keyboard
[     6.688] (II) config/udev: Adding input device Compx 2.4G Receiver System Control (/dev/input/event9)
[     6.688] (**) Compx 2.4G Receiver System Control: Applying InputClass "libinput keyboard catchall"
[     6.688] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver System Control'
[     6.688] (**) Compx 2.4G Receiver System Control: always reports core events
[     6.688] (**) Option "Device" "/dev/input/event9"
[     6.689] (II) event9  - Compx 2.4G Receiver System Control: is tagged by udev as: Keyboard
[     6.689] (II) event9  - Compx 2.4G Receiver System Control: device is a keyboard
[     6.690] (II) event9  - Compx 2.4G Receiver System Control: device removed
[     6.707] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:FA23.0002/input/input8/event9"
[     6.707] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver System Control" (type: KEYBOARD, id 13)
[     6.709] (II) event9  - Compx 2.4G Receiver System Control: is tagged by udev as: Keyboard
[     6.710] (II) event9  - Compx 2.4G Receiver System Control: device is a keyboard
[     6.711] (II) config/udev: Adding input device USB PnP Audio Device (/dev/input/event25)
[     6.711] (**) USB PnP Audio Device: Applying InputClass "libinput keyboard catchall"
[     6.711] (II) Using input driver 'libinput' for 'USB PnP Audio Device'
[     6.711] (**) USB PnP Audio Device: always reports core events
[     6.711] (**) Option "Device" "/dev/input/event25"
[     6.712] (II) event25 - USB PnP Audio Device: is tagged by udev as: Keyboard
[     6.713] (II) event25 - USB PnP Audio Device: device is a keyboard
[     6.713] (II) event25 - USB PnP Audio Device: device removed
[     6.736] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:0C76:161F.0004/input/input28/event25"
[     6.736] (II) XINPUT: Adding extended input device "USB PnP Audio Device" (type: KEYBOARD, id 14)
[     6.738] (II) event25 - USB PnP Audio Device: is tagged by udev as: Keyboard
[     6.739] (II) event25 - USB PnP Audio Device: device is a keyboard
[     6.740] (II) config/udev: Adding input device UNIW0001:00 093A:0255 Mouse (/dev/input/event13)
[     6.740] (**) UNIW0001:00 093A:0255 Mouse: Applying InputClass "libinput pointer catchall"
[     6.740] (II) Using input driver 'libinput' for 'UNIW0001:00 093A:0255 Mouse'
[     6.740] (**) UNIW0001:00 093A:0255 Mouse: always reports core events
[     6.740] (**) Option "Device" "/dev/input/event13"
[     6.755] (II) event13 - UNIW0001:00 093A:0255 Mouse: is tagged by udev as: Mouse Pointingstick
[     6.756] (II) event13 - UNIW0001:00 093A:0255 Mouse: device is a pointer
[     6.757] (II) event13 - UNIW0001:00 093A:0255 Mouse: device removed
[     6.780] (II) libinput: UNIW0001:00 093A:0255 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[     6.780] (II) libinput: UNIW0001:00 093A:0255 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[     6.780] (II) libinput: UNIW0001:00 093A:0255 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[     6.780] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-11/i2c-UNIW0001:00/0018:093A:0255.0003/input/input16/event13"
[     6.780] (II) XINPUT: Adding extended input device "UNIW0001:00 093A:0255 Mouse" (type: MOUSE, id 15)
[     6.780] (**) Option "AccelerationScheme" "none"
[     6.780] (**) UNIW0001:00 093A:0255 Mouse: (accel) selected scheme none/0
[     6.780] (**) UNIW0001:00 093A:0255 Mouse: (accel) acceleration factor: 2.000
[     6.780] (**) UNIW0001:00 093A:0255 Mouse: (accel) acceleration threshold: 4
[     6.784] (II) event13 - UNIW0001:00 093A:0255 Mouse: is tagged by udev as: Mouse Pointingstick
[     6.785] (II) event13 - UNIW0001:00 093A:0255 Mouse: device is a pointer
[     6.787] (II) config/udev: Adding input device UNIW0001:00 093A:0255 Mouse (/dev/input/mouse1)
[     6.787] (II) No input driver specified, ignoring this device.
[     6.787] (II) This device may have been added with another device file.
[     6.787] (II) config/udev: Adding input device UNIW0001:00 093A:0255 Touchpad (/dev/input/event14)
[     6.787] (**) UNIW0001:00 093A:0255 Touchpad: Applying InputClass "libinput touchpad catchall"
[     6.787] (II) Using input driver 'libinput' for 'UNIW0001:00 093A:0255 Touchpad'
[     6.787] (**) UNIW0001:00 093A:0255 Touchpad: always reports core events
[     6.787] (**) Option "Device" "/dev/input/event14"
[     6.788] (II) event14 - UNIW0001:00 093A:0255 Touchpad: is tagged by udev as: Touchpad
[     6.789] (EE) event14 - UNIW0001:00 093A:0255 Touchpad: kernel bug: clickpad advertising right button. See https://wayland.freedesktop.org/libinput/doc/1.28.1/clickpad-with-right-button.html for details
[     6.790] (II) event14 - UNIW0001:00 093A:0255 Touchpad: device is a touchpad
[     6.790] (II) event14 - UNIW0001:00 093A:0255 Touchpad: device removed
[     6.811] (II) libinput: UNIW0001:00 093A:0255 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[     6.811] (II) libinput: UNIW0001:00 093A:0255 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[     6.811] (II) libinput: UNIW0001:00 093A:0255 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[     6.812] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-11/i2c-UNIW0001:00/0018:093A:0255.0003/input/input17/event14"
[     6.812] (II) XINPUT: Adding extended input device "UNIW0001:00 093A:0255 Touchpad" (type: TOUCHPAD, id 16)
[     6.814] (**) Option "AccelerationScheme" "none"
[     6.814] (**) UNIW0001:00 093A:0255 Touchpad: (accel) selected scheme none/0
[     6.814] (**) UNIW0001:00 093A:0255 Touchpad: (accel) acceleration factor: 2.000
[     6.814] (**) UNIW0001:00 093A:0255 Touchpad: (accel) acceleration threshold: 4
[     6.816] (II) event14 - UNIW0001:00 093A:0255 Touchpad: is tagged by udev as: Touchpad
[     6.816] (EE) event14 - UNIW0001:00 093A:0255 Touchpad: kernel bug: clickpad advertising right button. See https://wayland.freedesktop.org/libinput/doc/1.28.1/clickpad-with-right-button.html for details
[     6.818] (II) event14 - UNIW0001:00 093A:0255 Touchpad: device is a touchpad
[     6.819] (II) config/udev: Adding input device UNIW0001:00 093A:0255 Touchpad (/dev/input/mouse2)
[     6.819] (II) No input driver specified, ignoring this device.
[     6.819] (II) This device may have been added with another device file.
[     6.819] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[     6.819] (II) No input driver specified, ignoring this device.
[     6.819] (II) This device may have been added with another device file.
[     6.819] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[     6.819] (II) No input driver specified, ignoring this device.
[     6.819] (II) This device may have been added with another device file.
[     6.820] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[     6.820] (II) No input driver specified, ignoring this device.
[     6.820] (II) This device may have been added with another device file.
[     6.820] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event18)
[     6.820] (II) No input driver specified, ignoring this device.
[     6.820] (II) This device may have been added with another device file.
[     6.820] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event19)
[     6.820] (II) No input driver specified, ignoring this device.
[     6.820] (II) This device may have been added with another device file.
[     6.821] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event20)
[     6.821] (II) No input driver specified, ignoring this device.
[     6.821] (II) This device may have been added with another device file.
[     6.821] (II) config/udev: Adding input device Intel HID events (/dev/input/event11)
[     6.821] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[     6.821] (II) Using input driver 'libinput' for 'Intel HID events'
[     6.821] (**) Intel HID events: always reports core events
[     6.821] (**) Option "Device" "/dev/input/event11"
[     6.821] (II) event11 - Intel HID events: is tagged by udev as: Keyboard
[     6.821] (II) event11 - Intel HID events: device is a keyboard
[     6.822] (II) event11 - Intel HID events: device removed
[     6.832] (**) Option "config_info" "udev:/sys/devices/platform/INTC1078:00/input/input12/event11"
[     6.832] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 17)
[     6.833] (II) event11 - Intel HID events: is tagged by udev as: Keyboard
[     6.833] (II) event11 - Intel HID events: device is a keyboard
[     6.834] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     6.834] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     6.834] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     6.834] (**) AT Translated Set 2 keyboard: always reports core events
[     6.834] (**) Option "Device" "/dev/input/event3"
[     6.835] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.836] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     6.837] (II) event3  - AT Translated Set 2 keyboard: device removed
[     6.851] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     6.851] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18)
[     6.853] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.853] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     6.855] (II) config/udev: Adding input device PC Speaker (/dev/input/event12)
[     6.855] (II) No input driver specified, ignoring this device.
[     6.855] (II) This device may have been added with another device file.
[     6.861] (**) Compx 2.4G Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[     6.861] (II) Using input driver 'libinput' for 'Compx 2.4G Receiver Consumer Control'
[     6.861] (**) Compx 2.4G Receiver Consumer Control: always reports core events
[     6.861] (**) Option "Device" "/dev/input/event7"
[     6.861] (II) libinput: Compx 2.4G Receiver Consumer Control: is a virtual subdevice
[     6.861] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:FA23.0002/input/input7/event7"
[     6.861] (II) XINPUT: Adding extended input device "Compx 2.4G Receiver Consumer Control" (type: KEYBOARD, id 19)
[     6.861] (II) config/udev: removing device USB PnP Audio Device
[     6.862] (II) event25 - USB PnP Audio Device: device removed
[     6.882] (II) UnloadModule: "libinput"
[     6.882] (II) config/udev: Adding input device USB PnP Audio Device (/dev/input/event25)
[     6.882] (**) USB PnP Audio Device: Applying InputClass "libinput keyboard catchall"
[     6.882] (II) Using input driver 'libinput' for 'USB PnP Audio Device'
[     6.882] (**) USB PnP Audio Device: always reports core events
[     6.882] (**) Option "Device" "/dev/input/event25"
[     6.883] (II) event25 - USB PnP Audio Device: is tagged by udev as: Keyboard
[     6.883] (II) event25 - USB PnP Audio Device: device is a keyboard
[     6.884] (II) event25 - USB PnP Audio Device: device removed
[     6.932] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.3/0003:0C76:161F.0004/input/input28/event25"
[     6.932] (II) XINPUT: Adding extended input device "USB PnP Audio Device" (type: KEYBOARD, id 14)
[     6.932] (II) event25 - USB PnP Audio Device: is tagged by udev as: Keyboard
[     6.932] (II) event25 - USB PnP Audio Device: device is a keyboard
[     6.932] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0 /dev/dri/card0
[     6.932] (II) config/udev: Adding drm device (/dev/dri/card0)
[     6.932] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.932] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[     6.932] (II) LoadModule: "modesetting"
[     6.932] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     6.932] (II) Module modesetting: vendor="X.Org Foundation"
[     6.932]    compiled for 1.21.1.18, module version = 1.21.1
[     6.932]    Module class: X.Org Video Driver
[     6.932]    ABI class: X.Org Video Driver, version 25.2
[     6.932] (II) UnloadModule: "modesetting"
[     6.932] (II) Unloading modesetting
[     6.933] (II) Failed to load module "modesetting" (already loaded, 0)
[     6.933] (II) modeset(G0): using drv /dev/dri/card0
[     6.933] (**) modeset(G0): Depth 24, (--) framebuffer bpp 32
[     6.933] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[     6.933] (==) modeset(G0): RGB weight 888
[     6.933] (==) modeset(G0): Default visual is TrueColor
[     6.933] (II) Loading sub module "glamoregl"
[     6.933] (II) LoadModule: "glamoregl"
[     6.933] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     6.934] (II) Module glamoregl: vendor="X.Org Foundation"
[     6.934]    compiled for 1.21.1.18, module version = 1.0.1
[     6.934]    ABI class: X.Org ANSI C Emulation, version 0.4
[     6.936] (II) modeset(G0): glamor X acceleration enabled on NVIDIA GeForce RTX 4050 Laptop GPU/PCIe/SSE2
[     6.936] (II) modeset(G0): glamor initialized
[     6.936] (II) modeset(G0): Output DP-1-1 using monitor section Monitor0
[     6.936] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[     6.936] (II) modeset(G0): Output eDP-1-2 has no monitor section
[     6.936] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[     6.936] (==) modeset(G0): DPI set to (96, 96)
[     6.936] (II) Loading sub module "fb"
[     6.936] (II) LoadModule: "fb"
[     6.936] (II) Module "fb" already built-in
[     6.936] (EE) modeset(G0): drmSetMaster failed: Device or resource busy
[     6.936] (II) UnloadModule: "modesetting"
[     6.936] (II) UnloadSubModule: "glamoregl"
[     6.936] (II) Unloading glamoregl
[     6.937] xf86: found device 1
[     7.329] (II) event10 - Video Bus: device removed
[     7.352] (II) event8  - Video Bus: device removed
[     7.368] (II) event1  - Power Button: device removed
[     7.374] (II) event0  - Sleep Button: device removed
[     7.380] (II) event4  - Compx 2.4G Receiver: device removed
[     7.386] (II) event5  - Compx 2.4G Receiver Mouse: device removed
[     7.400] (II) event9  - Compx 2.4G Receiver System Control: device removed
[     7.406] (II) event13 - UNIW0001:00 093A:0255 Mouse: device removed
[     7.419] (II) event14 - UNIW0001:00 093A:0255 Touchpad: device removed
[     7.435] (II) event11 - Intel HID events: device removed
[     7.441] (II) event3  - AT Translated Set 2 keyboard: device removed
[     7.448] (II) event7  - Compx 2.4G Receiver Consumer Control: device removed
[     7.458] (II) event25 - USB PnP Audio Device: device removed

Offline

#4 2025-08-15 13:49:55

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,650

Re: [SOLVED]SDDM stuck on blinking cursor

[     5.635] Kernel command line: initrd=\arch\boot\x86_64\initramfs-linux.img archisobasedir=arch archisosearchuuid=2025-07-01-17-34-06-00

Why are there archiso entries?

[     5.637] (==) Using config file: "/etc/X11/xorg.conf"

Remove that file.

[     5.652] (II) NVIDIA dlloader X Driver  580.76.05  Thu Aug  7 19:59:47 UTC 2025
[     5.998] (WW) Warning, couldn't open module glxserver_nvidia
[     5.998] (EE) NVIDIA: Failed to load module "glxserver_nvidia" (module does not exist, 0)
[     5.998] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[     5.998] (EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
[     5.998] (EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.  If
[     5.998] (EE) NVIDIA(0):     you continue to encounter problems, Please try
[     5.998] (EE) NVIDIA(0):     reinstalling the NVIDIA driver.
[     5.998] (II) NVIDIA: The X server does not support PRIME Render

The module path doesn't get extended, meaning the outputclass doesn't apply - the actual error is shadowed by the static server config (the file you're supposed to remove)
There're no outputs attached to the nvidia GPU, so it's questionable why you'd run that server config tbw.

Fwwi, you're likely in the same category as https://bbs.archlinux.org/viewtopic.php?id=307580

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2025-08-15 14:01:24

PYL29
Member
Registered: 2025-08-15
Posts: 5

Re: [SOLVED]SDDM stuck on blinking cursor

Downgrading the nvidia-utils package seems to fix the problem. No idea about the iso though. Could it be because of secure boot?

Offline

#6 2025-08-15 14:04:35

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,650

Re: [SOLVED]SDDM stuck on blinking cursor

Could it be because of secure boot?

No. These parameters exist in the install iso, but should™ not appear in an installation.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2025-08-15 19:20:38

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,650

Re: [SOLVED]SDDM stuck on blinking cursor

This seems to be a race condition, the GPU takes toolong™ to init.
See https://bbs.archlinux.org/viewtopic.php … 8#p2256418

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#8 2025-08-17 13:13:46

PYL29
Member
Registered: 2025-08-15
Posts: 5

Re: [SOLVED]SDDM stuck on blinking cursor

seth wrote:

Could it be because of secure boot?

No. These parameters exist in the install iso, but should™ not appear in an installation.

Can i just delete it from /proc/cmdline safely?

Offline

#9 2025-08-17 13:16:08

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,650

Re: [SOLVED]SDDM stuck on blinking cursor

In theory - but w/o knowing what you did to have them show up there I cannot predict the impact at all.
But iIff it ends up disastrous (what I do not expect), you can just re-add them.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#10 2025-08-17 13:32:24

PYL29
Member
Registered: 2025-08-15
Posts: 5

Re: [SOLVED]SDDM stuck on blinking cursor

The actual problem was I skipped over this step, assuming it's "fine" since 575 driver worked with it but the driver was actually disabled. Adding the kernel modules fixed it.

Offline

#11 2025-08-17 13:34:24

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,650

Re: [SOLVED]SDDM stuck on blinking cursor

That actually fits the other thread except there even early kms wasn't "fast enough"™

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB