You are not logged in.

Pages: 1

#1 2025-08-23 19:46:56

nephtalima
Member
Registered: 2025-08-23
Posts: 4

[Solved] WINE does not start at all

Good day.

I have been trying to run some of my old Windows programs on my computer, but I have been trying to get WINE running for some time.

Firstly, I tried running my programs through WINE via Nemo file browser thing.

Did not work, did not give any indication as to why.

Then, I ran WINE from the command line:

$ wine MediBangPaintPro.exe
002c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
wine: Unhandled page fault on write access to 0000000140020928 at address 00006FFFFFC34F58 (thread 002c), starting debugger...
002c:err:seh:start_debugger Couldn't start debugger L"winedbg --auto 40 116" (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger
wine: could not load kernel32.dll, status c0000135

Mind you I have the following installed:

$ pacman -Qs wine
local/wine-stable 10.0-1
    A compatibility layer for running Windows programs
local/wine-stable-debug 10.0-1
    Detached debugging symbols for wine-stable
local/winetricks 20250102-1
    Script to install various redistributable runtime libraries in Wine.

I have also run 

pacman -Syyu

and updated everything as of today. I have also rebooted to remove Linux firmware weirdness.

I searched up errors relating to Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0):

  • I found this Reddit post talking about the same error:
    https://www.reddit.com/r/archlinux/comm … nel_51212/

    I have tried removing the ~/.wine folder, and running winecfg:

    [nephtalima@tomato-station-arch ~]$ winecfg
wine: created the configuration directory '/home/nephtalima/.wine'
002c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
wine: Unhandled page fault on write access to 0000000140020AD8 at address 00006FFFFFC34F58 (thread 002c), starting debugger...
002c:err:seh:start_debugger Couldn't start debugger L"winedbg --auto 40 80" (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger
004c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
wine: could not load kernel32.dll, status c0000135
[nephtalima@tomato-station-arch ~]$ wine: Unhandled page fault on write access to 000000014001EB38 at address 00006FFFFFC34F58 (thread 004c), starting debugger...
004c:err:seh:start_debugger Couldn't start debugger L"winedbg --auto 72 156" (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger
wine: Unhandled page fault on write access to 00006FFFFE4C3C10 at address 00006FFFFFC34F58 (thread 0044), starting debugger...
0044:err:seh:start_debugger Couldn't start debugger L"winedbg --auto 64 128" (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger

    (Doesn't work)

  • Then I found another Reddit post https://www.reddit.com/r/linuxquestions … _run_wine/) that linked to this website (https://www.gloriouseggroll.tv/how-to-g … ency-hell/), but two issues:

    1. It uses wine-staging, which conflicts with my existing wine-stable

    2. All the lib* packages it says to download are just reinstalled: 

      [nephtalima@tomato-station-arch ~]$ sudo pacman -S giflib lib32-giflib libpng lib32-libpng libldap lib32-libldap gnutls lib32-gnutls mpg123 lib32-mpg123 openal lib32-openal v4l-utils lib32-v4l-utils libpulse lib32-libpulse alsa-plugins lib32-alsa-plugins alsa-lib lib32-alsa-lib libjpeg-turbo lib32-libjpeg-turbo libxcomposite lib32-libxcomposite libxinerama lib32-libxinerama ncurses lib32-ncurses opencl-icd-loader lib32-opencl-icd-loader libxslt lib32-libxslt libva lib32-libva gtk3 lib32-gtk3 gst-plugins-base-libs lib32-gst-plugins-base-libs vulkan-icd-loader lib32-vulkan-icd-loader cups samba dosbox
[sudo] password for nephtalima: 
warning: giflib-5.2.2-2 is up to date -- reinstalling
warning: lib32-giflib-5.2.2-1 is up to date -- reinstalling
warning: libpng-1.6.50-1 is up to date -- reinstalling
warning: lib32-libpng-1.6.50-1 is up to date -- reinstalling
warning: libldap-2.6.10-2 is up to date -- reinstalling
warning: lib32-libldap-2.6.10-1 is up to date -- reinstalling
warning: gnutls-3.8.10-1 is up to date -- reinstalling
warning: lib32-gnutls-3.8.10-1 is up to date -- reinstalling
warning: mpg123-1.33.1-1 is up to date -- reinstalling
warning: lib32-mpg123-1.33.2-1 is up to date -- reinstalling
warning: openal-1.24.3-1 is up to date -- reinstalling
warning: lib32-openal-1.24.3-1 is up to date -- reinstalling
warning: v4l-utils-1.30.1-1 is up to date -- reinstalling
warning: lib32-v4l-utils-1.28.1-1 is up to date -- reinstalling
warning: libpulse-17.0+r43+g3e2bb8a1e-1 is up to date -- reinstalling
warning: lib32-libpulse-17.0+r43+g3e2bb8a1e-1 is up to date -- reinstalling
warning: alsa-plugins-1:1.2.12-4 is up to date -- reinstalling
warning: lib32-alsa-plugins-1.2.12-1 is up to date -- reinstalling
warning: alsa-lib-1.2.14-1 is up to date -- reinstalling
warning: lib32-alsa-lib-1.2.14-1 is up to date -- reinstalling
warning: libjpeg-turbo-3.1.1-1 is up to date -- reinstalling
warning: lib32-libjpeg-turbo-3.1.1-1 is up to date -- reinstalling
warning: libxcomposite-0.4.6-2 is up to date -- reinstalling
warning: lib32-libxcomposite-0.4.6-2 is up to date -- reinstalling
warning: libxinerama-1.1.5-2 is up to date -- reinstalling
warning: lib32-libxinerama-1.1.5-2 is up to date -- reinstalling
warning: ncurses-6.5-4 is up to date -- reinstalling
warning: lib32-ncurses-6.5-2 is up to date -- reinstalling
warning: ocl-icd-2.3.3-1 is up to date -- reinstalling
warning: lib32-ocl-icd-2.3.3-1 is up to date -- reinstalling
warning: libxslt-1.1.43-2 is up to date -- reinstalling
warning: lib32-libxslt-1.1.43-2 is up to date -- reinstalling
warning: libva-2.22.0-1 is up to date -- reinstalling
warning: lib32-libva-2.22.0-1 is up to date -- reinstalling
warning: gtk3-1:3.24.50-1 is up to date -- reinstalling
warning: lib32-gtk3-1:3.24.50-1 is up to date -- reinstalling
warning: gst-plugins-base-libs-1.26.5-1 is up to date -- reinstalling
warning: lib32-gst-plugins-base-libs-1.26.5-1 is up to date -- reinstalling
warning: vulkan-icd-loader-1.4.321.0-1 is up to date -- reinstalling
warning: lib32-vulkan-icd-loader-1.4.321.0-1 is up to date -- reinstalling
warning: cups-2:2.4.12-2 is up to date -- reinstalling
warning: samba-2:4.22.4-1 is up to date -- reinstalling
warning: dosbox-0.74.3-3 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...

Packages (43) alsa-lib-1.2.14-1  alsa-plugins-1:1.2.12-4  cups-2:2.4.12-2  dosbox-0.74.3-3  giflib-5.2.2-2  gnutls-3.8.10-1  gst-plugins-base-libs-1.26.5-1
              gtk3-1:3.24.50-1  lib32-alsa-lib-1.2.14-1  lib32-alsa-plugins-1.2.12-1  lib32-giflib-5.2.2-1  lib32-gnutls-3.8.10-1
              lib32-gst-plugins-base-libs-1.26.5-1  lib32-gtk3-1:3.24.50-1  lib32-libjpeg-turbo-3.1.1-1  lib32-libldap-2.6.10-1  lib32-libpng-1.6.50-1
              lib32-libpulse-17.0+r43+g3e2bb8a1e-1  lib32-libva-2.22.0-1  lib32-libxcomposite-0.4.6-2  lib32-libxinerama-1.1.5-2  lib32-libxslt-1.1.43-2
              lib32-mpg123-1.33.2-1  lib32-ncurses-6.5-2  lib32-ocl-icd-2.3.3-1  lib32-openal-1.24.3-1  lib32-v4l-utils-1.28.1-1
              lib32-vulkan-icd-loader-1.4.321.0-1  libjpeg-turbo-3.1.1-1  libldap-2.6.10-2  libpng-1.6.50-1  libpulse-17.0+r43+g3e2bb8a1e-1  libva-2.22.0-1
              libxcomposite-0.4.6-2  libxinerama-1.1.5-2  libxslt-1.1.43-2  mpg123-1.33.1-1  ncurses-6.5-4  ocl-icd-2.3.3-1  openal-1.24.3-1  samba-2:4.22.4-1
              v4l-utils-1.30.1-1  vulkan-icd-loader-1.4.321.0-1

Total Installed Size:  205.10 MiB
Net Upgrade Size:        0.00 MiB

    Which also doesn't solve anything (and I don't want to be on wine-staging)

  • Then I found this post:
    https://www.reddit.com/r/wine_gaming/co … lications/, which has a link that goes to another post on this forum (https://bbs.archlinux.org/viewtopic.php?id=286784), but this is useless as I don't have any errors with systray, so I completely doubt that this is relevant

  • I also found this post: https://bbs.archlinux.org/viewtopic.php?id=268151. I tried running 

    $ WINEARCH=win32 WINEPREFIX=~/clean_win32 winecfg
$ WINEPREFIX=~/clean_win64 winecfg

    But they fail:

    [nephtalima@tomato-station-arch ~]$ WINEARCH=win32 WINEPREFIX=~/clean_win32 winecfg
wine: created the configuration directory '/home/nephtalima/clean_win32'
002c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
wine: Unhandled page fault on write access to 0041B5B0 at address 7BCF2A37 (thread 002c), starting debugger...
002c:err:seh:start_debugger Couldn't start debugger L"winedbg --auto 40 112" (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger
wine: could not load kernel32.dll, status c0000135
[nephtalima@tomato-station-arch ~]$ 004c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
wine: Unhandled page fault on write access to 0041F5EC at address 7BCF2A37 (thread 004c), starting debugger...
004c:err:seh:start_debugger Couldn't start debugger L"winedbg --auto 72 156" (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger
wine: Unhandled page fault on write access to 7A9F264C at address 7BCF2A37 (thread 0044), starting debugger...
0044:err:seh:start_debugger Couldn't start debugger L"winedbg --auto 64 100" (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger
WINEARCH=win32 WINEPREFIX=~/clean_win32 PREFIX=~/clean_win64
wine: created the configuration directory '/home/nephtalima/clean_win64'
002c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
wine: Unhandled page fault on write access to 0000000140020AD8 at address 00006FFFFFC34F58 (thread 002c), starting debugger...
002c:err:seh:start_debugger Couldn't start debugger L"winedbg --auto 40 112" (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger
wine: could not load kernel32.dll, status c0000135
[nephtalima@tomato-station-arch ~]$ 004c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
wine: Unhandled page fault on write access to 000000014001EB38 at address 00006FFFFFC34F58 (thread 004c), starting debugger...
004c:err:seh:start_debugger Couldn't start debugger L"winedbg --auto 72 156" (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger
wine: Unhandled page fault on write access to 00006FFFFE4C3C10 at address 00006FFFFFC34F58 (thread 0044), starting debugger...
0044:err:seh:start_debugger Couldn't start debugger L"winedbg --auto 64 100" (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger

    I have also run:

    [nephtalima@tomato-station-arch ~]$ env WINEPREFIX=~/.customprefix wineboot -u
002c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
wine: Unhandled page fault on write access to 0000000140020928 at address 00006FFFFFC34F58 (thread 002c), starting debugger...
002c:err:seh:start_debugger Couldn't start debugger L"winedbg --auto 40 116" (2)
Read the Wine Developers Guide on how to set up winedbg or another debugger
wine: could not load kernel32.dll, status c0000135

  • I have also taken a look at this post:
    https://bbs.archlinux.org/viewtopic.php?id=299491, but the issues there don't seem too relevant, and the solution mentions that "[They're] gonna chalk it up to the fact that [they] have too many process running at once", which doesn't help as the only other applications I have open at the moment are this browser and my terminal, and if they affect WINE this much, then wtf.

  • Finally, I found this post:
    https://bbs.archlinux.org/viewtopic.php?id=268723
    But I don't have any NVIDIA drivers, and I doubt this is a graphics related issue... I may be completely wrong, but goddamn.

I don't know what is going on anymore, and winedbg and winecfg and wineboot have not worked AT ALL. :(

Here is the output of lspci -k

[nephtalima@tomato-station-arch ~]$ lspci -k
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root Complex
	Subsystem: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne IOMMU
	Subsystem: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne IOMMU
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge
	Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1453
	Kernel driver in use: pcieport
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
	Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1453
	Kernel driver in use: pcieport
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
	Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1453
	Kernel driver in use: pcieport
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
	Subsystem: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
	Kernel driver in use: pcieport
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 51)
	Subsystem: ASRock Incorporation Device ffff
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
	Subsystem: ASRock Incorporation Device ffff
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 3
	Kernel driver in use: k10temp
	Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 7
01:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Upstream Port of PCI Express Switch (rev c7)
	Kernel driver in use: pcieport
02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream Port of PCI Express Switch
	Kernel driver in use: pcieport
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 23 [Radeon RX 6600/6600 XT/6600M] (rev c7)
	Subsystem: ASUSTeK Computer Inc. Device 05d5
	Kernel driver in use: amdgpu
	Kernel modules: amdgpu
03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21/23 HDMI/DP Audio Controller
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
04:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset USB 3.1 XHCI Controller
	Subsystem: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller
	Kernel driver in use: xhci_hcd
04:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset SATA Controller
	Subsystem: ASMedia Technology Inc. ASM1062 Serial ATA Controller
	Kernel driver in use: ahci
04:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset Switch Upstream Port
	Subsystem: ASMedia Technology Inc. Device 0201
	Kernel driver in use: pcieport
05:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset Switch Downstream Port
	Subsystem: ASMedia Technology Inc. Device 3308
	Kernel driver in use: pcieport
05:08.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset Switch Downstream Port
	Subsystem: ASMedia Technology Inc. Device 3308
	Kernel driver in use: pcieport
05:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset Switch Downstream Port
	Subsystem: ASMedia Technology Inc. Device 3308
	Kernel driver in use: pcieport
06:00.0 Non-Volatile memory controller: MAXIO Technology (Hangzhou) Ltd. NVMe SSD Controller MAP1202 (DRAM-less) (rev 01)
	Subsystem: MAXIO Technology (Hangzhou) Ltd. NVMe SSD Controller MAP1202 (DRAM-less)
	Kernel driver in use: nvme
	Kernel modules: nvme
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller (rev 15)
	Subsystem: ASRock Incorporation Motherboard (one of many)
	Kernel driver in use: r8169
	Kernel modules: r8169
08:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8822BE 802.11a/b/g/n/ac WiFi adapter
	Subsystem: Hewlett-Packard Company Realtek RTL8822BE 802.11ac 2x2 Wi-Fi + Bluetooth 4.2 Combo Adapter (MU-MIMO supported)
	Kernel driver in use: rtw88_8822be
	Kernel modules: rtw88_8822be
09:00.0 Non-Volatile memory controller: Kingston Technology Company, Inc. NV2 NVMe SSD [SM2267XT] (DRAM-less) (rev 03)
	Subsystem: Kingston Technology Company, Inc. NV2 NVMe SSD [SM2267XT] (DRAM-less)
	Kernel driver in use: nvme
	Kernel modules: nvme
0a:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega Mobile Series] (rev c9)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 1636
	Kernel driver in use: amdgpu
	Kernel modules: amdgpu
0a:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Renoir/Cezanne HDMI/DP Audio Controller
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Renoir/Cezanne HDMI/DP Audio Controller
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
0a:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/FireFlight/Renoir/Cezanne Platform Security Processor
	Subsystem: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/FireFlight/Renoir/Cezanne Platform Security Processor
	Kernel driver in use: ccp
	Kernel modules: ccp
0a:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
	Subsystem: ASRock Incorporation Device ffff
	Kernel driver in use: xhci_hcd
0a:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
	Subsystem: ASRock Incorporation Device ffff
	Kernel driver in use: xhci_hcd
0a:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h/19h/1ah HD Audio Controller
	Subsystem: ASRock Incorporation Device 1204
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

Output of glxinfo -B

[nephtalima@tomato-station-arch ~]$ glxinfo -B
name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: AMD (0x1002)
    Device: AMD Radeon RX 6600 (radeonsi, navi23, LLVM 20.1.8, DRM 3.64, 6.16.2-arch1-1) (0x73ff)
    Version: 25.2.1
    Accelerated: yes
    Video memory: 8192MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 4.6
    Max compat profile version: 4.6
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.2
Memory info (GL_ATI_meminfo):
    VBO free memory - total: 7469 MB, largest block: 7469 MB
    VBO free aux. memory - total: 13859 MB, largest block: 13859 MB
    Texture free memory - total: 7469 MB, largest block: 7469 MB
    Texture free aux. memory - total: 13859 MB, largest block: 13859 MB
    Renderbuffer free memory - total: 7469 MB, largest block: 7469 MB
    Renderbuffer free aux. memory - total: 13859 MB, largest block: 13859 MB
Memory info (GL_NVX_gpu_memory_info):
    Dedicated video memory: 8192 MB
    Total available memory: 22155 MB
    Currently available dedicated video memory: 7469 MB
OpenGL vendor string: AMD
OpenGL renderer string: AMD Radeon RX 6600 (radeonsi, navi23, LLVM 20.1.8, DRM 3.64, 6.16.2-arch1-1)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 25.2.1-arch1.1
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 4.6 (Compatibility Profile) Mesa 25.2.1-arch1.1
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile

OpenGL ES profile version string: OpenGL ES 3.2 Mesa 25.2.1-arch1.1
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20

Some more information:
The program I want to run runs fine on my laptop, which has:

[nephtalima@hyacinthe ~]$ pacman -Qs wine
local/wine-stable 9.0-3
    A compatibility layer for running Windows programs
local/wine-stable-debug 9.0-3
    Detached debugging symbols for wine-stable

I'd like to believe that it is not a graphical issue, as I have no mentions of it in my error messages, but I may be completely wrong.

Thank you and good luck on my issue

Last edited by nephtalima (2025-08-24 23:42:26)

Offline

#2 2025-08-23 20:23:15

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 71,617

Re: [Solved] WINE does not start at all

pacman -Syyu

Please check the pacman manpage on what the second "y" does and then stop doing that unless you really *really*mean to.

nb, that wine-stable isn't in the repos and will not be covered by such updates unless you're getting it out of a 3rd party repo (which?)
https://aur.archlinux.org/packages/wine-stable - you might want to try to update/rebuild that, but beforehand maybe test to run wincfg from the repo version.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2025-08-23 23:45:29

nephtalima
Member
Registered: 2025-08-23
Posts: 4

Re: [Solved] WINE does not start at all

seth wrote:

Please check the pacman manpage on what the second "y" does and then stop doing that unless you really *really*mean to.

I recognize that it refreshes the database, and yes it would be faster to not do it, but typically I know that the updates are going to take like 3 minutes to complete and another 10 seconds isn't really worth worrying about.

seth wrote:

nb, that wine-stable isn't in the repos and will not be covered by such updates unless you're getting it out of a 3rd party repo (which?)
https://aur.archlinux.org/packages/wine-stable - you might want to try to update/rebuild that, but beforehand maybe test to run wincfg from the repo version.

So, yes that AUR page is where I got this WINE package, and it works on my laptop despite me not really updating it since I got it on my laptop (which makes sense).
So I downloaded that package again and installed it, and:

[nephtalima@tomato-station-arch MediBangPaintPro]$ winecfg
wine: created the configuration directory '/home/nephtalima/.wine'
002c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
004c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
0054:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
0054:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr 0x80004002
0054:err:ole:CoMarshalInterface Failed to marshal the interface {6d5140c1-7436-11ce-8034-00aa006009fa}, hr 0x80004002
0054:err:ole:apartment_get_local_server_stream Failed: 0x80004002
0054:err:ole:start_rpcss Failed to open RpcSs service
004c:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr 0x80004002
004c:err:ole:CoMarshalInterface Failed to marshal the interface {6d5140c1-7436-11ce-8034-00aa006009fa}, hr 0x80004002
004c:err:ole:apartment_get_local_server_stream Failed: 0x80004002
009c:fixme:file:NtLockFile I/O completion on lock not implemented yet
009c:fixme:ntdll:NtQuerySystemInformation info_class SYSTEM_PERFORMANCE_INFORMATION
00a4:fixme:file:NtLockFile I/O completion on lock not implemented yet
00a4:fixme:ntdll:NtQuerySystemInformation info_class SYSTEM_PERFORMANCE_INFORMATION
00a4:fixme:msi:internal_ui_handler internal UI not implemented for message 0x0b000000 (UI level = 5)
00a4:fixme:msi:internal_ui_handler internal UI not implemented for message 0x0b000000 (UI level = 5)
009c:fixme:msi:internal_ui_handler internal UI not implemented for message 0x0b000000 (UI level = 1)
009c:fixme:msi:internal_ui_handler internal UI not implemented for message 0x0b000000 (UI level = 1)
0104:fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
002c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
002c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0128:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0128:err:setupapi:do_file_copyW Unsupported style(s) 0x10
002c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0164:fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
0164:fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet

This popped out a window for WINE configuration, which means I have some progress! big_smile

Unfortunately, now I run into a new problem. Launching the program again yields:

[nephtalima@tomato-station-arch MediBangPaintPro]$ wine MediBangPaintPro.exe
012c:fixme:wlanapi:WlanRegisterNotification (0000000000000001, 65535, 1, 00006FFFF7612F90, 00007FCFBFD28990, 0000000000000000, 0000000000000000) stub
0134:fixme:wlanapi:WlanEnumInterfaces (0000000000000001, 0000000000000000, 00007FFFFF64BBE0) semi-stub
0058:fixme:ndis:query_global_stats Unsupported OID 10202
0058:fixme:ndis:query_global_stats Unsupported OID 10202
0058:fixme:ndis:query_global_stats Unsupported OID 10202
0058:fixme:ndis:query_global_stats Unsupported OID 10202
0058:fixme:ndis:query_global_stats Unsupported OID 10202
0058:fixme:ndis:query_global_stats Unsupported OID 10202
0134:fixme:wlanapi:WlanEnumInterfaces (0000000000000001, 0000000000000000, 00007FFFFF64B1A8) semi-stub
0058:fixme:ndis:query_global_stats Unsupported OID 10202
0058:fixme:ndis:query_global_stats Unsupported OID 10202
0058:fixme:ndis:query_global_stats Unsupported OID 10202
0130:fixme:dbghelp:elf_search_auxv can't find symbol in module
0138:fixme:dbghelp:elf_search_auxv can't find symbol in module

And now I'm stuck again... :C

Offline

#4 2025-08-23 23:51:14

skunktrader
Member
From: Brisbane, Australia
Registered: 2010-02-14
Posts: 1,661

Re: [Solved] WINE does not start at all

nephtalima wrote:

I recognize that it refreshes the database, and yes it would be faster to not do it, but typically I know that the updates are going to take like 3 minutes to complete and another 10 seconds isn't really worth worrying about.

It's not about the 10 seconds of your life, its about the wasted network / mirror bandwidth that somebody has to pay for

Offline

#5 2025-08-23 23:58:17

nephtalima
Member
Registered: 2025-08-23
Posts: 4

Re: [Solved] WINE does not start at all

skunktrader wrote:
nephtalima wrote:

I recognize that it refreshes the database, and yes it would be faster to not do it, but typically I know that the updates are going to take like 3 minutes to complete and another 10 seconds isn't really worth worrying about.

It's not about the 10 seconds of your life, its about the wasted network / mirror bandwidth that somebody has to pay for

Ah that makes sense. That's fine enough for me; I use more than that daily for it to be significant.

Offline

#6 2025-08-24 09:53:13

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 71,617

Re: [Solved] WINE does not start at all

It is also an awesome way to trash/invalidate/outdate your local database, so don't.
Also please avoid bloating the thread w/ pointless full quotes (which is about me having to scroll more tongue)

The wine debug/error output has obviously changed
1. is this still wine-stable or actully wine from the repos
2. which version of medibang paint pro is this?
https://appdb.winehq.org/objectManager. … &iId=19703

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2025-08-24 23:41:54

nephtalima
Member
Registered: 2025-08-23
Posts: 4

Re: [Solved] WINE does not start at all

seth wrote:

It is also an awesome way to trash/invalidate/outdate your local database, so don't.
Also please avoid bloating the thread w/ pointless full quotes (which is about me having to scroll more tongue)

Ah I see. Thanks for the info!~

Anyways, back to the topic at hand:

seth wrote:

1. is this still wine-stable or actully wine from the repos

This is still wine-stable. I didn't want to use the one from the repos (iirc, that is wine-staging) mainly because I didn't want to completely bork the existing configuration (as I am not the most experienced with WINE). This is the latest version of it as of yesterday.

seth wrote:

2. which version of medibang paint pro is this?

I don't know. I installed this version on my Windows installation back when I used to daily drive Windows, and I do not know how I can check it when it doesn't run. AFAIK, this exact same version is the one on the laptop, so I would take a wager that something minor changed from WINE 9 to WINE 10.

I was busy today but only got back now. I didn't mention for brevity but I also tried LTSpice XVII and it didn't work due to similar error yesterday when I first started this thread. Now I have tried to run LTSpice and it works without issue (haven't tested fully yet, but it launches and that's more than it was doing yesterday).

I've played around with LTSpice now, and no major issues to report back. Since LTSpice has loaded, I now deduce that now it is an issue with MediBangPaintPro, so I will install a newer version and report back.

I think this issue is with MediBangPaintPro itself, as I tried installing 29.1, but WINE still freaks out on launching it... I will mark this as solved since this isn't a WINE issue anymore.

Offline

Pages: 1

Board footer

Powered by FluxBB