You are not logged in.

Pages: 1

#1 2025-09-02 19:28:01

jongeduard
Member
Registered: 2022-01-06
Posts: 21

SDDM issues on kernel 6.16, but not on kernel LTS 6.12

Hi,

Does anyone know, is there a known bug with either the SDDM display manager itself or otherwise with kernel 6.16 which causes SDDM to fail on system startup (black screen with cursor)?
(Everything works fine on LTS kernel 6.12, it specifically happens on 6.16)

Or is there something I have to fix myself?

When I manually run a `systemctl restart sddm.service` from another TTY it does launch correctly again.
But with almost every new boot, it fails again.
So I suspect some timing problem might be going on, otherwise it's hard to explain why I'm able to manually start it that way.

My machine is a Lenovo Legion 5 Pro and it has AMD Ryzen 7 5800H with Radeon Graphics as well as an NVIDIA GeForce RTX 3060 Laptop GPU.

I also have the NVIDIA proprietary driver installed.

Also note that the issue happens when I boot with dynamic graphics configured, so that the AMD graphics are used by default (which I use most lot of the time to save energy).

Last edited by jongeduard (2025-09-02 19:29:45)

Offline

#2 2025-09-02 20:37:49

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 71,050

Re: SDDM issues on kernel 6.16, but not on kernel LTS 6.12

When I manually run a `systemctl restart sddm.service` from another TTY it does launch correctly again.

Race condition, the 580xx nvidia drivers have shown slow inits, https://bbs.archlinux.org/viewtopic.php … 8#p2256488

If you cannot completely disable the nvidia GPU in the UEFI settings, please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General (save it before restarting SDDM) and maybe also your system journal holds clues where things are failing.
Do you have the amdgpu modules in the initramfs?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2025-09-02 21:16:19

tekstryder
Member
Registered: 2013-02-14
Posts: 464

Re: SDDM issues on kernel 6.16, but not on kernel LTS 6.12

jongeduard wrote:

When I manually run a `systemctl restart sddm.service` from another TTY it does launch correctly again.
But with almost every new boot, it fails again.

Are the nVidia modules loaded early via your initramfs?

See:

• https://forums.developer.nvidia.com/t/5 … tekstryder

EDIT: Ah, OP prefers NOT to use nVidia for SDDM... ignore my post.

Nothing mentioned in the release notes, but see if the behavior changes with 580.82.07, now in testing.

• https://www.nvidia.com/en-us/drivers/details/253003

Last edited by tekstryder (2025-09-02 21:23:52)

Offline

#4 2025-09-05 09:57:42

jongeduard
Member
Registered: 2022-01-06
Posts: 21

Re: SDDM issues on kernel 6.16, but not on kernel LTS 6.12

The amdgpu module is early loaded. I now manually checked it, it's in both the normal and LTS initramfs.

NVIDIA is not, but since the problem that I'm experiencing does not seem to happen when I configure my laptop to use dedicated NVIDIA (disabling the AMD graphics), I suspect this problem might not NVIDIA related at all.


Ah, so SDDM is still on Xorg by default. Somehow I remember it was already on Wayland before, but maybe I'm wrong with that. At least currently it clearly isn't.
This is my Xorg.0.log, copied from the moment immediately after SDDM failure:

[    10.340] (--) Log file renamed from "/var/log/Xorg.pid-929.log" to "/var/log/Xorg.0.log"
[    10.341] 
X.Org X Server 1.21.1.18
X Protocol Version 11, Revision 0
[    10.341] Current Operating System: Linux eduard-laptop 6.16.4-arch1-1 #1 SMP PREEMPT_DYNAMIC Thu, 28 Aug 2025 19:49:53 +0000 x86_64
[    10.341] Kernel command line: BOOT_IMAGE=/@archlinux/boot/vmlinuz-linux root=UUID=60a8061f-cd28-4cac-adb7-8aabe0ab4767 rw rootflags=subvol=@archlinux loglevel=3 nvidia-drm.modeset=1 nvidia-drm.fbdev=1 nvidia.NVreg_PreserveVideoMemoryAllocations=1 nvidia.NVreg_TemporaryFilePath=/var/tmp
[    10.341]  
[    10.341] Current version of pixman: 0.46.4
[    10.341] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    10.341] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    10.341] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep  5 11:45:09 2025
[    10.342] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    10.342] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    10.342] (==) No Layout section.  Using the first Screen section.
[    10.342] (==) No screen section available. Using defaults.
[    10.342] (**) |-->Screen "Default Screen Section" (0)
[    10.342] (**) |   |-->Monitor "<default monitor>"
[    10.342] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    10.342] (**) Allowing byte-swapped clients
[    10.342] (==) Automatically adding devices
[    10.342] (==) Automatically enabling devices
[    10.342] (==) Automatically adding GPU devices
[    10.342] (==) Automatically binding GPU devices
[    10.342] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    10.345] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    10.345] (==) ModulePath set to "/usr/lib/xorg/modules"
[    10.345] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    10.345] (II) Module ABI versions:
[    10.345] 	X.Org ANSI C Emulation: 0.4
[    10.345] 	X.Org Video Driver: 25.2
[    10.345] 	X.Org XInput driver : 24.4
[    10.345] 	X.Org Server Extension : 10.0
[    10.345] (++) using VT number 2

[    10.345] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    10.345] (II) xfree86: Adding drm device (/dev/dri/card1)
[    10.345] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:06:00.0/drm/card1
[    10.354] (--) PCI: (1@0:0:0) 10de:2560:17aa:3a80 rev 161, Mem @ 0xd0000000/16777216, 0xfa00000000/8589934592, 0xfc00000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    10.354] (--) PCI:*(6@0:0:0) 1002:1638:17aa:3a80 rev 197, Mem @ 0xfc10000000/268435456, 0xfc20000000/2097152, 0xd1500000/524288, I/O @ 0x00001000/256
[    10.354] (II) LoadModule: "glx"
[    10.355] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    10.362] (II) Module glx: vendor="X.Org Foundation"
[    10.362] 	compiled for 1.21.1.18, module version = 1.0.0
[    10.362] 	ABI class: X.Org Server Extension, version 10.0
[    10.362] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[    10.362] 	loading driver: amdgpu
[    10.362] (==) Matched amdgpu as autoconfigured driver 0
[    10.362] (==) Matched ati as autoconfigured driver 1
[    10.362] (==) Matched modesetting as autoconfigured driver 2
[    10.362] (==) Matched fbdev as autoconfigured driver 3
[    10.362] (==) Matched vesa as autoconfigured driver 4
[    10.362] (==) Assigned the driver to the xf86ConfigLayout
[    10.362] (II) LoadModule: "amdgpu"
[    10.362] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[    10.364] (II) Module amdgpu: vendor="X.Org Foundation"
[    10.364] 	compiled for 1.21.1.18, module version = 25.0.0
[    10.364] 	Module class: X.Org Video Driver
[    10.364] 	ABI class: X.Org Video Driver, version 25.2
[    10.364] (II) LoadModule: "ati"
[    10.364] (WW) Warning, couldn't open module ati
[    10.364] (EE) Failed to load module "ati" (module does not exist, 0)
[    10.364] (II) LoadModule: "modesetting"
[    10.364] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    10.365] (II) Module modesetting: vendor="X.Org Foundation"
[    10.365] 	compiled for 1.21.1.18, module version = 1.21.1
[    10.365] 	Module class: X.Org Video Driver
[    10.365] 	ABI class: X.Org Video Driver, version 25.2
[    10.365] (II) LoadModule: "fbdev"
[    10.365] (WW) Warning, couldn't open module fbdev
[    10.365] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    10.365] (II) LoadModule: "vesa"
[    10.365] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    10.365] (II) Module vesa: vendor="X.Org Foundation"
[    10.365] 	compiled for 1.21.1.11, module version = 2.6.0
[    10.365] 	Module class: X.Org Video Driver
[    10.365] 	ABI class: X.Org Video Driver, version 25.2
[    10.365] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[    10.365] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    10.365] (II) VESA: driver for VESA chipsets: vesa
[    10.372] (WW) Falling back to old probe method for modesetting
[    10.372] (EE) open /dev/dri/card0: No such file or directory
[    10.372] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    10.372] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[    10.372] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    10.372] (==) AMDGPU(0): Default visual is TrueColor
[    10.372] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card1
[    10.372] (==) AMDGPU(0): RGB weight 888
[    10.372] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[    10.372] (--) AMDGPU(0): Chipset: "AMD Radeon Graphics" (ChipID = 0x1638)
[    10.372] (II) Loading sub module "fb"
[    10.372] (II) LoadModule: "fb"
[    10.372] (II) Module "fb" already built-in
[    10.372] (II) Loading sub module "dri2"
[    10.372] (II) LoadModule: "dri2"
[    10.372] (II) Module "dri2" already built-in
[    10.535] (II) Loading sub module "glamoregl"
[    10.535] (II) LoadModule: "glamoregl"
[    10.535] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    10.539] (II) Module glamoregl: vendor="X.Org Foundation"
[    10.539] 	compiled for 1.21.1.18, module version = 1.0.1
[    10.539] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    10.624] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon Graphics (radeonsi, renoir, ACO, DRM 3.64, 6.16.4-arch1-1)
[    10.624] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[    10.624] (==) AMDGPU(0): TearFree property default: auto
[    10.624] (==) AMDGPU(0): VariableRefresh: disabled
[    10.624] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[    10.624] (II) AMDGPU(0): KMS Pageflipping: enabled
[    10.628] (II) AMDGPU(0): Output eDP has no monitor section
[    10.655] (II) AMDGPU(0): EDID for output eDP
[    10.655] (II) AMDGPU(0): Manufacturer: BOE  Model: 985  Serial#: 0
[    10.655] (II) AMDGPU(0): Year: 2020  Week: 28
[    10.655] (II) AMDGPU(0): EDID Version: 1.4
[    10.655] (II) AMDGPU(0): Digital Display Input
[    10.655] (II) AMDGPU(0): 10 bits per channel
[    10.655] (II) AMDGPU(0): Digital interface is DisplayPort
[    10.655] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 34  vert.: 21
[    10.655] (II) AMDGPU(0): Gamma: 2.20
[    10.655] (II) AMDGPU(0): No DPMS capabilities specified
[    10.655] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 
[    10.655] (II) AMDGPU(0): First detailed timing is preferred mode
[    10.655] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[    10.655] (II) AMDGPU(0): Display is continuous-frequency
[    10.655] (II) AMDGPU(0): redX: 0.642 redY: 0.335   greenX: 0.300 greenY: 0.621
[    10.655] (II) AMDGPU(0): blueX: 0.151 blueY: 0.061   whiteX: 0.313 whiteY: 0.329
[    10.655] (II) AMDGPU(0): Manufacturer's mask: 0
[    10.655] (II) AMDGPU(0): Supported detailed timing:
[    10.655] (II) AMDGPU(0): clock: 282.7 MHz   Image Size:  344 x 215 mm
[    10.655] (II) AMDGPU(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[    10.655] (II) AMDGPU(0): v_active: 1600  v_sync: 1603  v_sync_end 1609 v_blanking: 1732 v_border: 0
[    10.655] (II) AMDGPU(0): Ranges: V min: 60 V max: 165 Hz, H min: 286 H max: 286 kHz, PixClock max 785 MHz
[    10.655] (II) AMDGPU(0):  BOE CQ
[    10.655] (II) AMDGPU(0):  NE160QDM-NY1
[    10.655] (II) AMDGPU(0): Number of EDID sections to follow: 1
[    10.655] (II) AMDGPU(0): EDID (in hex):
[    10.655] (II) AMDGPU(0): 	00ffffffffffff0009e5850900000000
[    10.655] (II) AMDGPU(0): 	1c1e0104b5221578037ce5a4554c9f26
[    10.655] (II) AMDGPU(0): 	0f505400000001010101010101010101
[    10.655] (II) AMDGPU(0): 	0101010101016b6e00a0a04084603020
[    10.655] (II) AMDGPU(0): 	360058d71000001a000000fd0c3ca51f
[    10.655] (II) AMDGPU(0): 	1f4e010a202020202020000000fe0042
[    10.655] (II) AMDGPU(0): 	4f452043510a202020202020000000fe
[    10.655] (II) AMDGPU(0): 	004e4531363051444d2d4e59310a01ed
[    10.655] (II) AMDGPU(0): 	02031d00e3058000e60605016a6a246d
[    10.655] (II) AMDGPU(0): 	1a000002033ca500046a246a24000000
[    10.655] (II) AMDGPU(0): 	00000000000000000000000000000000
[    10.655] (II) AMDGPU(0): 	00000000000000000000000000000000
[    10.655] (II) AMDGPU(0): 	00000000000000000000000000000000
[    10.655] (II) AMDGPU(0): 	00000000000000000000000000000000
[    10.655] (II) AMDGPU(0): 	00000000000000000000000000000000
[    10.655] (II) AMDGPU(0): 	000000000000000000000000000000ff
[    10.655] (II) AMDGPU(0): Printing probed modes for output eDP
[    10.655] (II) AMDGPU(0): Modeline "2560x1600"x60.0  282.67  2560 2608 2640 2720  1600 1603 1609 1732 +hsync -vsync (103.9 kHz eP)
[    10.655] (II) AMDGPU(0): Modeline "1920x1200"x60.0  282.67  1920 2608 2640 2720  1200 1603 1609 1732 +hsync -vsync (103.9 kHz e)
[    10.655] (II) AMDGPU(0): Modeline "1920x1080"x60.0  282.67  1920 2608 2640 2720  1080 1603 1609 1732 +hsync -vsync (103.9 kHz e)
[    10.655] (II) AMDGPU(0): Modeline "1600x1200"x60.0  282.67  1600 2608 2640 2720  1200 1603 1609 1732 +hsync -vsync (103.9 kHz e)
[    10.655] (II) AMDGPU(0): Modeline "1680x1050"x60.0  282.67  1680 2608 2640 2720  1050 1603 1609 1732 +hsync -vsync (103.9 kHz e)
[    10.655] (II) AMDGPU(0): Modeline "1280x1024"x60.0  282.67  1280 2608 2640 2720  1024 1603 1609 1732 +hsync -vsync (103.9 kHz e)
[    10.655] (II) AMDGPU(0): Modeline "1440x900"x60.0  282.67  1440 2608 2640 2720  900 1603 1609 1732 +hsync -vsync (103.9 kHz e)
[    10.655] (II) AMDGPU(0): Modeline "1280x800"x60.0  282.67  1280 2608 2640 2720  800 1603 1609 1732 +hsync -vsync (103.9 kHz e)
[    10.655] (II) AMDGPU(0): Modeline "1280x720"x60.0  282.67  1280 2608 2640 2720  720 1603 1609 1732 +hsync -vsync (103.9 kHz e)
[    10.655] (II) AMDGPU(0): Modeline "1024x768"x60.0  282.67  1024 2608 2640 2720  768 1603 1609 1732 +hsync -vsync (103.9 kHz e)
[    10.655] (II) AMDGPU(0): Modeline "800x600"x60.0  282.67  800 2608 2640 2720  600 1603 1609 1732 +hsync -vsync (103.9 kHz e)
[    10.655] (II) AMDGPU(0): Modeline "640x480"x60.0  282.67  640 2608 2640 2720  480 1603 1609 1732 +hsync -vsync (103.9 kHz e)
[    10.655] (II) AMDGPU(0): Output eDP connected
[    10.655] (II) AMDGPU(0): Using exact sizes for initial modes
[    10.655] (II) AMDGPU(0): Output eDP using initial mode 2560x1600 +0+0
[    10.655] (II) AMDGPU(0): mem size init: gart size :367610000 vram size: s:fd7b4000 visible:fd7b4000
[    10.655] (++) AMDGPU(0): DPI set to (144, 144)
[    10.655] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[    10.655] (II) Loading sub module "ramdac"
[    10.655] (II) LoadModule: "ramdac"
[    10.655] (II) Module "ramdac" already built-in
[    10.655] (II) UnloadModule: "modesetting"
[    10.655] (II) Unloading modesetting
[    10.656] (II) UnloadModule: "vesa"
[    10.656] (II) Unloading vesa
[    10.656] (II) AMDGPU(0): [DRI2] Setup complete
[    10.656] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[    10.656] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[    10.656] (II) AMDGPU(0): Front buffer pitch: 10240 bytes
[    10.656] (II) AMDGPU(0): SYNC extension fences enabled
[    10.656] (II) AMDGPU(0): Present extension enabled
[    10.656] (==) AMDGPU(0): DRI3 enabled
[    10.656] (==) AMDGPU(0): Backing store enabled
[    10.656] (II) AMDGPU(0): Direct rendering enabled
[    10.666] (II) AMDGPU(0): Use GLAMOR acceleration.
[    10.666] (II) AMDGPU(0): Acceleration enabled
[    10.666] (==) AMDGPU(0): DPMS enabled
[    10.666] (==) AMDGPU(0): Silken mouse enabled
[    10.666] (II) AMDGPU(0): Set up textured video (glamor)
[    10.684] (WW) AMDGPU(0): Option "HotplugDriver" is not used
[    10.684] (II) Initializing extension Generic Event Extension
[    10.684] (II) Initializing extension SHAPE
[    10.684] (II) Initializing extension MIT-SHM
[    10.684] (II) Initializing extension XInputExtension
[    10.684] (II) Initializing extension XTEST
[    10.684] (II) Initializing extension BIG-REQUESTS
[    10.684] (II) Initializing extension SYNC
[    10.685] (II) Initializing extension XKEYBOARD
[    10.685] (II) Initializing extension XC-MISC
[    10.685] (II) Initializing extension SECURITY
[    10.685] (II) Initializing extension XFIXES
[    10.685] (II) Initializing extension RENDER
[    10.685] (II) Initializing extension RANDR
[    10.685] (II) Initializing extension COMPOSITE
[    10.685] (II) Initializing extension DAMAGE
[    10.685] (II) Initializing extension MIT-SCREEN-SAVER
[    10.685] (II) Initializing extension DOUBLE-BUFFER
[    10.685] (II) Initializing extension RECORD
[    10.685] (II) Initializing extension DPMS
[    10.685] (II) Initializing extension Present
[    10.685] (II) Initializing extension DRI3
[    10.685] (II) Initializing extension X-Resource
[    10.686] (II) Initializing extension XVideo
[    10.686] (II) Initializing extension XVideo-MotionCompensation
[    10.686] (II) Initializing extension GLX
[    10.693] (II) AIGLX: Loaded and initialized radeonsi
[    10.693] (II) GLX: Initialized DRI2 GL provider for screen 0
[    10.693] (II) Initializing extension XFree86-VidModeExtension
[    10.693] (II) Initializing extension XFree86-DGA
[    10.693] (II) Initializing extension XFree86-DRI
[    10.693] (II) Initializing extension DRI2
[    10.693] (II) AMDGPU(0): Setting screen physical size to 451 x 282
[    10.797] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    10.797] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    10.797] (**) Power Button: Applying InputClass "system-keyboard"
[    10.797] (II) LoadModule: "libinput"
[    10.797] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    10.800] (II) Module libinput: vendor="X.Org Foundation"
[    10.800] 	compiled for 1.21.1.13, module version = 1.5.0
[    10.800] 	Module class: X.Org XInput Driver
[    10.800] 	ABI class: X.Org XInput driver, version 24.4
[    10.800] (II) Using input driver 'libinput' for 'Power Button'
[    10.800] (**) Power Button: always reports core events
[    10.800] (**) Option "Device" "/dev/input/event2"
[    10.804] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    10.804] (II) event2  - Power Button: device is a keyboard
[    10.804] (II) event2  - Power Button: device removed
[    10.813] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    10.813] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    10.813] (**) Option "xkb_options" "caps:escape_shifted_capslock"
[    10.825] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    10.825] (II) event2  - Power Button: device is a keyboard
[    10.826] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    10.826] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    10.826] (**) Video Bus: Applying InputClass "system-keyboard"
[    10.826] (II) Using input driver 'libinput' for 'Video Bus'
[    10.826] (**) Video Bus: always reports core events
[    10.826] (**) Option "Device" "/dev/input/event4"
[    10.826] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    10.826] (II) event4  - Video Bus: device is a keyboard
[    10.826] (II) event4  - Video Bus: device removed
[    10.852] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:00/input/input4/event4"
[    10.852] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    10.852] (**) Option "xkb_options" "caps:escape_shifted_capslock"
[    10.852] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[    10.852] (II) event4  - Video Bus: device is a keyboard
[    10.853] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    10.853] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    10.853] (**) Power Button: Applying InputClass "system-keyboard"
[    10.853] (II) Using input driver 'libinput' for 'Power Button'
[    10.853] (**) Power Button: always reports core events
[    10.853] (**) Option "Device" "/dev/input/event0"
[    10.853] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    10.854] (II) event0  - Power Button: device is a keyboard
[    10.854] (II) event0  - Power Button: device removed
[    10.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    10.870] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    10.870] (**) Option "xkb_options" "caps:escape_shifted_capslock"
[    10.870] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    10.870] (II) event0  - Power Button: device is a keyboard
[    10.871] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    10.871] (II) No input driver specified, ignoring this device.
[    10.871] (II) This device may have been added with another device file.
[    10.871] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[    10.871] (II) No input driver specified, ignoring this device.
[    10.871] (II) This device may have been added with another device file.
[    10.871] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[    10.871] (II) No input driver specified, ignoring this device.
[    10.871] (II) This device may have been added with another device file.
[    10.872] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[    10.872] (II) No input driver specified, ignoring this device.
[    10.872] (II) This device may have been added with another device file.
[    10.872] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[    10.872] (II) No input driver specified, ignoring this device.
[    10.872] (II) This device may have been added with another device file.
[    10.873] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[    10.873] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[    10.873] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[    10.873] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[    10.873] (**) Logitech USB Receiver: always reports core events
[    10.873] (**) Option "Device" "/dev/input/event5"
[    10.874] (II) event5  - Logitech USB Receiver: is tagged by udev as: Keyboard
[    10.874] (II) event5  - Logitech USB Receiver: device is a keyboard
[    10.874] (II) event5  - Logitech USB Receiver: device removed
[    10.891] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb1/1-2/1-2.3/1-2.3:1.0/0003:046D:C548.0001/input/input5/event5"
[    10.891] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[    10.891] (**) Option "xkb_options" "caps:escape_shifted_capslock"
[    10.892] (II) event5  - Logitech USB Receiver: is tagged by udev as: Keyboard
[    10.892] (II) event5  - Logitech USB Receiver: device is a keyboard
[    10.893] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/event6)
[    10.893] (**) Logitech USB Receiver Mouse: Applying InputClass "libinput pointer catchall"
[    10.893] (II) Using input driver 'libinput' for 'Logitech USB Receiver Mouse'
[    10.893] (**) Logitech USB Receiver Mouse: always reports core events
[    10.893] (**) Option "Device" "/dev/input/event6"
[    10.894] (II) event6  - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[    10.894] (II) event6  - Logitech USB Receiver Mouse: device set to 1000 DPI
[    10.894] (II) event6  - Logitech USB Receiver Mouse: device is a pointer
[    10.894] (II) event6  - Logitech USB Receiver Mouse: device removed
[    10.921] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    10.921] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    10.921] (II) libinput: Logitech USB Receiver Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    10.921] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb1/1-2/1-2.3/1-2.3:1.1/0003:046D:C548.0002/input/input6/event6"
[    10.921] (II) XINPUT: Adding extended input device "Logitech USB Receiver Mouse" (type: MOUSE, id 10)
[    10.921] (**) Option "AccelerationScheme" "none"
[    10.921] (**) Logitech USB Receiver Mouse: (accel) selected scheme none/0
[    10.921] (**) Logitech USB Receiver Mouse: (accel) acceleration factor: 2.000
[    10.921] (**) Logitech USB Receiver Mouse: (accel) acceleration threshold: 4
[    10.922] (II) event6  - Logitech USB Receiver Mouse: is tagged by udev as: Mouse
[    10.922] (II) event6  - Logitech USB Receiver Mouse: device set to 1000 DPI
[    10.922] (II) event6  - Logitech USB Receiver Mouse: device is a pointer
[    10.923] (II) config/udev: Adding input device Logitech USB Receiver Mouse (/dev/input/mouse0)
[    10.923] (II) No input driver specified, ignoring this device.
[    10.923] (II) This device may have been added with another device file.
[    10.923] (II) config/udev: Adding input device Logitech USB Receiver Consumer Control (/dev/input/event7)
[    10.923] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[    10.923] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[    10.923] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[    10.924] (**) Logitech USB Receiver Consumer Control: always reports core events
[    10.924] (**) Option "Device" "/dev/input/event7"
[    10.925] (II) event7  - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[    10.925] (II) event7  - Logitech USB Receiver Consumer Control: device is a keyboard
[    10.925] (II) event7  - Logitech USB Receiver Consumer Control: device removed
[    10.940] (II) libinput: Logitech USB Receiver Consumer Control: needs a virtual subdevice
[    10.940] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb1/1-2/1-2.3/1-2.3:1.1/0003:046D:C548.0002/input/input7/event7"
[    10.940] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: MOUSE, id 11)
[    10.940] (**) Option "AccelerationScheme" "none"
[    10.940] (**) Logitech USB Receiver Consumer Control: (accel) selected scheme none/0
[    10.940] (**) Logitech USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[    10.940] (**) Logitech USB Receiver Consumer Control: (accel) acceleration threshold: 4
[    10.941] (II) event7  - Logitech USB Receiver Consumer Control: is tagged by udev as: Keyboard
[    10.941] (II) event7  - Logitech USB Receiver Consumer Control: device is a keyboard
[    10.942] (II) config/udev: Adding input device Logitech USB Receiver System Control (/dev/input/event8)
[    10.942] (**) Logitech USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
[    10.942] (**) Logitech USB Receiver System Control: Applying InputClass "system-keyboard"
[    10.942] (II) Using input driver 'libinput' for 'Logitech USB Receiver System Control'
[    10.942] (**) Logitech USB Receiver System Control: always reports core events
[    10.942] (**) Option "Device" "/dev/input/event8"
[    10.943] (II) event8  - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[    10.943] (II) event8  - Logitech USB Receiver System Control: device is a keyboard
[    10.943] (II) event8  - Logitech USB Receiver System Control: device removed
[    10.958] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb1/1-2/1-2.3/1-2.3:1.1/0003:046D:C548.0002/input/input8/event8"
[    10.958] (II) XINPUT: Adding extended input device "Logitech USB Receiver System Control" (type: KEYBOARD, id 12)
[    10.958] (**) Option "xkb_options" "caps:escape_shifted_capslock"
[    10.959] (II) event8  - Logitech USB Receiver System Control: is tagged by udev as: Keyboard
[    10.959] (II) event8  - Logitech USB Receiver System Control: device is a keyboard
[    10.960] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
[    10.960] (II) No input driver specified, ignoring this device.
[    10.960] (II) This device may have been added with another device file.
[    10.960] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
[    10.960] (**) Logitech USB Receiver: Applying InputClass "libinput touchpad catchall"
[    10.960] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[    10.960] (**) Logitech USB Receiver: always reports core events
[    10.960] (**) Option "Device" "/dev/input/event10"
[    11.013] (II) event10 - Logitech USB Receiver: is tagged by udev as: Touchpad
[    11.014] (II) event10 - Logitech USB Receiver: device is a touchpad
[    11.014] (II) event10 - Logitech USB Receiver: device removed
[    11.053] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used.
[    11.053] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used.
[    11.053] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used.
[    11.053] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb1/1-2/1-2.3/1-2.3:1.3/0003:046D:C548.0004/input/input13/event10"
[    11.053] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: TOUCHPAD, id 13)
[    11.054] (**) Option "AccelerationScheme" "none"
[    11.054] (**) Logitech USB Receiver: (accel) selected scheme none/0
[    11.054] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    11.054] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    11.107] (II) event10 - Logitech USB Receiver: is tagged by udev as: Touchpad
[    11.108] (II) event10 - Logitech USB Receiver: device is a touchpad
[    11.109] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[    11.109] (II) No input driver specified, ignoring this device.
[    11.109] (II) This device may have been added with another device file.
[    11.110] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8910) Keyboard (/dev/input/event11)
[    11.110] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "libinput keyboard catchall"
[    11.110] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "system-keyboard"
[    11.110] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Keyboard'
[    11.110] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: always reports core events
[    11.110] (**) Option "Device" "/dev/input/event11"
[    11.111] (II) event11 - ITE Tech. Inc. ITE Device(8910) Keyboard: is tagged by udev as: Keyboard
[    11.111] (II) event11 - ITE Tech. Inc. ITE Device(8910) Keyboard: device is a keyboard
[    11.111] (II) event11 - ITE Tech. Inc. ITE Device(8910) Keyboard: device removed
[    11.132] (II) libinput: ITE Tech. Inc. ITE Device(8910) Keyboard: needs a virtual subdevice
[    11.132] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb1/1-4/1-4:1.0/0003:048D:C101.0005/input/input11/event11"
[    11.132] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Keyboard" (type: MOUSE, id 14)
[    11.132] (**) Option "AccelerationScheme" "none"
[    11.132] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) selected scheme none/0
[    11.132] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) acceleration factor: 2.000
[    11.132] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: (accel) acceleration threshold: 4
[    11.134] (II) event11 - ITE Tech. Inc. ITE Device(8910) Keyboard: is tagged by udev as: Keyboard
[    11.134] (II) event11 - ITE Tech. Inc. ITE Device(8910) Keyboard: device is a keyboard
[    11.135] (II) config/udev: Adding input device ITE Tech. Inc. ITE Device(8910) Wireless Radio Control (/dev/input/event12)
[    11.135] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[    11.135] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: Applying InputClass "system-keyboard"
[    11.135] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Wireless Radio Control'
[    11.135] (**) ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: always reports core events
[    11.135] (**) Option "Device" "/dev/input/event12"
[    11.136] (II) event12 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: is tagged by udev as: Keyboard
[    11.136] (II) event12 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device is a keyboard
[    11.136] (II) event12 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device removed
[    11.170] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb1/1-4/1-4:1.0/0003:048D:C101.0005/input/input12/event12"
[    11.170] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Wireless Radio Control" (type: KEYBOARD, id 15)
[    11.170] (**) Option "xkb_options" "caps:escape_shifted_capslock"
[    11.171] (II) event12 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: is tagged by udev as: Keyboard
[    11.171] (II) event12 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device is a keyboard
[    11.171] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event20)
[    11.171] (II) No input driver specified, ignoring this device.
[    11.171] (II) This device may have been added with another device file.
[    11.172] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event21)
[    11.172] (II) No input driver specified, ignoring this device.
[    11.172] (II) This device may have been added with another device file.
[    11.172] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event15)
[    11.172] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[    11.172] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[    11.172] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[    11.172] (**) Ideapad extra buttons: always reports core events
[    11.172] (**) Option "Device" "/dev/input/event15"
[    11.173] (II) event15 - Ideapad extra buttons: is tagged by udev as: Keyboard
[    11.173] (II) event15 - Ideapad extra buttons: device is a keyboard
[    11.173] (II) event15 - Ideapad extra buttons: device removed
[    11.206] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input17/event15"
[    11.206] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 16)
[    11.206] (**) Option "xkb_options" "caps:escape_shifted_capslock"
[    11.207] (II) event15 - Ideapad extra buttons: is tagged by udev as: Keyboard
[    11.207] (II) event15 - Ideapad extra buttons: device is a keyboard
[    11.208] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Mouse (/dev/input/event13)
[    11.208] (**) SYNA2BA6:00 06CB:CE78 Mouse: Applying InputClass "libinput pointer catchall"
[    11.208] (II) Using input driver 'libinput' for 'SYNA2BA6:00 06CB:CE78 Mouse'
[    11.208] (**) SYNA2BA6:00 06CB:CE78 Mouse: always reports core events
[    11.208] (**) Option "Device" "/dev/input/event13"
[    11.210] (II) event13 - SYNA2BA6:00 06CB:CE78 Mouse: is tagged by udev as: Mouse Pointingstick
[    11.210] (II) event13 - SYNA2BA6:00 06CB:CE78 Mouse: device is a pointer
[    11.211] (II) event13 - SYNA2BA6:00 06CB:CE78 Mouse: device removed
[    11.244] (II) libinput: SYNA2BA6:00 06CB:CE78 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    11.244] (II) libinput: SYNA2BA6:00 06CB:CE78 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    11.244] (II) libinput: SYNA2BA6:00 06CB:CE78 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    11.244] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:01/i2c-0/i2c-SYNA2BA6:00/0018:06CB:CE78.0006/input/input14/event13"
[    11.244] (II) XINPUT: Adding extended input device "SYNA2BA6:00 06CB:CE78 Mouse" (type: MOUSE, id 17)
[    11.244] (**) Option "AccelerationScheme" "none"
[    11.244] (**) SYNA2BA6:00 06CB:CE78 Mouse: (accel) selected scheme none/0
[    11.244] (**) SYNA2BA6:00 06CB:CE78 Mouse: (accel) acceleration factor: 2.000
[    11.244] (**) SYNA2BA6:00 06CB:CE78 Mouse: (accel) acceleration threshold: 4
[    11.246] (II) event13 - SYNA2BA6:00 06CB:CE78 Mouse: is tagged by udev as: Mouse Pointingstick
[    11.247] (II) event13 - SYNA2BA6:00 06CB:CE78 Mouse: device is a pointer
[    11.248] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Mouse (/dev/input/mouse2)
[    11.248] (II) No input driver specified, ignoring this device.
[    11.248] (II) This device may have been added with another device file.
[    11.248] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Touchpad (/dev/input/event14)
[    11.248] (**) SYNA2BA6:00 06CB:CE78 Touchpad: Applying InputClass "libinput touchpad catchall"
[    11.248] (II) Using input driver 'libinput' for 'SYNA2BA6:00 06CB:CE78 Touchpad'
[    11.248] (**) SYNA2BA6:00 06CB:CE78 Touchpad: always reports core events
[    11.248] (**) Option "Device" "/dev/input/event14"
[    11.249] (II) event14 - SYNA2BA6:00 06CB:CE78 Touchpad: is tagged by udev as: Touchpad
[    11.250] (II) event14 - SYNA2BA6:00 06CB:CE78 Touchpad: device is a touchpad
[    11.250] (II) event14 - SYNA2BA6:00 06CB:CE78 Touchpad: device removed
[    11.282] (II) libinput: SYNA2BA6:00 06CB:CE78 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    11.282] (II) libinput: SYNA2BA6:00 06CB:CE78 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    11.282] (II) libinput: SYNA2BA6:00 06CB:CE78 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[    11.282] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:01/i2c-0/i2c-SYNA2BA6:00/0018:06CB:CE78.0006/input/input15/event14"
[    11.282] (II) XINPUT: Adding extended input device "SYNA2BA6:00 06CB:CE78 Touchpad" (type: TOUCHPAD, id 18)
[    11.284] (**) Option "AccelerationScheme" "none"
[    11.284] (**) SYNA2BA6:00 06CB:CE78 Touchpad: (accel) selected scheme none/0
[    11.284] (**) SYNA2BA6:00 06CB:CE78 Touchpad: (accel) acceleration factor: 2.000
[    11.284] (**) SYNA2BA6:00 06CB:CE78 Touchpad: (accel) acceleration threshold: 4
[    11.284] (II) event14 - SYNA2BA6:00 06CB:CE78 Touchpad: is tagged by udev as: Touchpad
[    11.286] (II) event14 - SYNA2BA6:00 06CB:CE78 Touchpad: device is a touchpad
[    11.286] (II) config/udev: Adding input device SYNA2BA6:00 06CB:CE78 Touchpad (/dev/input/mouse3)
[    11.286] (II) No input driver specified, ignoring this device.
[    11.286] (II) This device may have been added with another device file.
[    11.287] (II) config/udev: Adding input device AT Raw Set 2 keyboard (/dev/input/event3)
[    11.287] (**) AT Raw Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    11.287] (**) AT Raw Set 2 keyboard: Applying InputClass "system-keyboard"
[    11.287] (II) Using input driver 'libinput' for 'AT Raw Set 2 keyboard'
[    11.287] (**) AT Raw Set 2 keyboard: always reports core events
[    11.287] (**) Option "Device" "/dev/input/event3"
[    11.287] (II) event3  - AT Raw Set 2 keyboard: is tagged by udev as: Keyboard
[    11.287] (II) event3  - AT Raw Set 2 keyboard: device is a keyboard
[    11.288] (II) event3  - AT Raw Set 2 keyboard: device removed
[    11.308] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    11.308] (II) XINPUT: Adding extended input device "AT Raw Set 2 keyboard" (type: KEYBOARD, id 19)
[    11.308] (**) Option "xkb_options" "caps:escape_shifted_capslock"
[    11.309] (II) event3  - AT Raw Set 2 keyboard: is tagged by udev as: Keyboard
[    11.309] (II) event3  - AT Raw Set 2 keyboard: device is a keyboard
[    11.315] (**) Logitech USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[    11.315] (**) Logitech USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[    11.315] (II) Using input driver 'libinput' for 'Logitech USB Receiver Consumer Control'
[    11.315] (**) Logitech USB Receiver Consumer Control: always reports core events
[    11.315] (**) Option "Device" "/dev/input/event7"
[    11.316] (II) libinput: Logitech USB Receiver Consumer Control: is a virtual subdevice
[    11.316] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb1/1-2/1-2.3/1-2.3:1.1/0003:046D:C548.0002/input/input7/event7"
[    11.316] (II) XINPUT: Adding extended input device "Logitech USB Receiver Consumer Control" (type: KEYBOARD, id 20)
[    11.316] (**) Option "xkb_options" "caps:escape_shifted_capslock"
[    11.316] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "libinput keyboard catchall"
[    11.316] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: Applying InputClass "system-keyboard"
[    11.316] (II) Using input driver 'libinput' for 'ITE Tech. Inc. ITE Device(8910) Keyboard'
[    11.316] (**) ITE Tech. Inc. ITE Device(8910) Keyboard: always reports core events
[    11.316] (**) Option "Device" "/dev/input/event11"
[    11.316] (II) libinput: ITE Tech. Inc. ITE Device(8910) Keyboard: is a virtual subdevice
[    11.316] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb1/1-4/1-4:1.0/0003:048D:C101.0005/input/input11/event11"
[    11.316] (II) XINPUT: Adding extended input device "ITE Tech. Inc. ITE Device(8910) Keyboard" (type: KEYBOARD, id 21)
[    11.316] (**) Option "xkb_options" "caps:escape_shifted_capslock"
[    11.324] (II) AMDGPU(0): EDID vendor "BOE", prod id 2437
[    11.324] (II) AMDGPU(0): Using EDID range info for horizontal sync
[    11.324] (II) AMDGPU(0): Using EDID range info for vertical refresh
[    11.324] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    11.324] (II) AMDGPU(0): Modeline "2560x1600"x0.0  282.67  2560 2608 2640 2720  1600 1603 1609 1732 +hsync -vsync (103.9 kHz eP)
[    11.324] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.1/0000:01:00.0/drm/card0 /dev/dri/card0
[    11.324] (II) config/udev: Adding drm device (/dev/dri/card0)
[    11.324] (II) xfree86: Adding drm device (/dev/dri/card0)
[    11.324] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.1/0000:01:00.0/drm/card0
[    11.324] (II) LoadModule: "modesetting"
[    11.324] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    11.324] (II) Module modesetting: vendor="X.Org Foundation"
[    11.324] 	compiled for 1.21.1.18, module version = 1.21.1
[    11.324] 	Module class: X.Org Video Driver
[    11.324] 	ABI class: X.Org Video Driver, version 25.2
[    11.324] (II) modeset(G0): using drv /dev/dri/card0
[    11.325] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    11.325] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[    11.325] (==) modeset(G0): RGB weight 888
[    11.325] (==) modeset(G0): Default visual is TrueColor
[    11.325] (II) Loading sub module "glamoregl"
[    11.325] (II) LoadModule: "glamoregl"
[    11.325] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    11.325] (II) Module glamoregl: vendor="X.Org Foundation"
[    11.325] 	compiled for 1.21.1.18, module version = 1.0.1
[    11.325] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    11.406] (II) modeset(G0): glamor X acceleration enabled on NVIDIA GeForce RTX 3060 Laptop GPU/PCIe/SSE2
[    11.406] (II) modeset(G0): glamor initialized
[    11.406] (II) modeset(G0): Output DP-1-1 has no monitor section
[    11.406] (II) modeset(G0): Output DP-1-2 has no monitor section
[    11.407] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[    11.407] (II) modeset(G0): Output eDP-1-2 has no monitor section
[    11.408] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    11.408] (++) modeset(G0): DPI set to (144, 144)
[    11.408] (II) Loading sub module "fb"
[    11.408] (II) LoadModule: "fb"
[    11.408] (II) Module "fb" already built-in
[    11.482] (==) modeset(G0): Backing store enabled
[    11.482] (==) modeset(G0): Silken mouse enabled
[    11.482] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[    11.482] (==) modeset(G0): DPMS enabled
[    11.482] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[    11.483] (II) modeset(G0): [DRI2] Setup complete
[    11.483] (II) modeset(G0): [DRI2]   DRI driver: nouveau
[    11.483] (II) modeset(G0): [DRI2]   VDPAU driver: nouveau
[    11.483] (EE) modeset(G0): Failed to create pixmap
[    11.486] (II) UnloadModule: "modesetting"
[    11.486] (II) UnloadSubModule: "glamoregl"
[    11.486] (II) Unloading glamoregl
[    11.486] xf86: found device 1
[    21.485] (II) event2  - Power Button: device removed
[    21.495] (II) event4  - Video Bus: device removed
[    21.515] (II) event0  - Power Button: device removed
[    21.525] (II) event5  - Logitech USB Receiver: device removed
[    21.535] (II) event6  - Logitech USB Receiver Mouse: device removed
[    21.555] (II) event8  - Logitech USB Receiver System Control: device removed
[    21.565] (II) event10 - Logitech USB Receiver: device removed
[    21.585] (II) event12 - ITE Tech. Inc. ITE Device(8910) Wireless Radio Control: device removed
[    21.601] (II) event15 - Ideapad extra buttons: device removed
[    21.621] (II) event13 - SYNA2BA6:00 06CB:CE78 Mouse: device removed
[    21.641] (II) event14 - SYNA2BA6:00 06CB:CE78 Touchpad: device removed
[    21.662] (II) event3  - AT Raw Set 2 keyboard: device removed
[    21.672] (II) event7  - Logitech USB Receiver Consumer Control: device removed
[    21.682] (II) event11 - ITE Tech. Inc. ITE Device(8910) Keyboard: device removed
[    21.692] (II) AIGLX: Suspending AIGLX clients for VT switch

Last edited by jongeduard (2025-09-05 09:59:52)

Offline

#5 2025-09-05 18:17:08

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 71,050

Re: SDDM issues on kernel 6.16, but not on kernel LTS 6.12

https://wiki.archlinux.org/title/SDDM#Wayland

[    11.406] (II) modeset(G0): glamor X acceleration enabled on NVIDIA GeForce RTX 3060 Laptop GPU/PCIe/SSE2
[    11.406] (II) modeset(G0): glamor initialized
[    11.483] (II) modeset(G0): [DRI2] Setup complete
[    11.483] (II) modeset(G0): [DRI2]   DRI driver: nouveau
[    11.483] (II) modeset(G0): [DRI2]   VDPAU driver: nouveau
[    11.483] (EE) modeset(G0): Failed to create pixmap

The server wants to drive the nvidia chip using the modesetting driver and fails (what will happen if nouveau is blacklisted for nvidia), presumingly because nvidia_drm is late to the party, => https://bbs.archlinux.org/viewtopic.php … 8#p2256488

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#6 2025-09-08 22:53:19

jotix
Member
Registered: 2025-09-08
Posts: 4

Re: SDDM issues on kernel 6.16, but not on kernel LTS 6.12

Hi, after some update sddm stop to work and simply turn the monitor off after login.
I do some journalctl and wiki search with no much success.

In the troubleshooting phase I change the default shell from fish to bash, and that was the solution.
I needed to do work quickly, so stop wandering the reasons of what this was the case, so throw this here maybe there is a correlation

Offline

#7 2025-09-09 07:02:55

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 71,050

Re: SDDM issues on kernel 6.16, but not on kernel LTS 6.12

@jotix, please stop spamming that in every SDDM thread you find.
fish is not a shell but a toy and setting it as default shell will certainly break numerous things, but we already know what the immediate problem is in these threads.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#8 2025-09-09 13:22:00

jotix
Member
Registered: 2025-09-08
Posts: 4

Re: SDDM issues on kernel 6.16, but not on kernel LTS 6.12

Sorry but is useful information, I have a very similar problem at almost the exact time and only post what work for me... maybe the exact thing happens to other and there is other possible solution .
what's your problem?

Last edited by jotix (2025-09-09 13:24:45)

Offline

#9 2025-09-09 13:35:50

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 71,050

Re: SDDM issues on kernel 6.16, but not on kernel LTS 6.12

No, you don't.
Ah, you figured that you don't in fact "have the excact same problem"…

The OP of this thread has a problem w/ the nvidia driver not properly initializing (in time) - we *know* this.
It's great that you solved your problem, but it's extremely unlikely that somebody set fish as their default shell tbw. and it will for absolutely sure not cause any kernel-dependent regressions. It will simply fail all the time because fish is barely posix compliant and will fail on all sorts of minor bashisms.
This is not a "maybe" situation.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#10 2025-09-10 00:29:55

jotix
Member
Registered: 2025-09-08
Posts: 4

Re: SDDM issues on kernel 6.16, but not on kernel LTS 6.12

seth wrote:

No, you don't.
Ah, you figured that you don't in fact "have the excact same problem"…

The OP of this thread has a problem w/ the nvidia driver not properly initializing (in time) - we *know* this.
It's great that you solved your problem, but it's extremely unlikely that somebody set fish as their default shell tbw. and it will for absolutely sure not cause any kernel-dependent regressions. It will simply fail all the time because fish is barely posix compliant and will fail on all sorts of minor bashisms.
This is not a "maybe" situation.

do you even know how to read properly?
you misquoted me. I write similar problem not the exact same problem.
so yeah, short live on the forums, first post and find the famous arch toxicity...

Last edited by jotix (2025-09-10 01:31:45)

Offline

#11 2025-09-10 05:55:57

schard
Forum Moderator
From: Hannover
Registered: 2016-05-06
Posts: 2,462
Website

Re: SDDM issues on kernel 6.16, but not on kernel LTS 6.12

Mod note: Please stay on topic, folks.
Posting questionable calls to action for unrelated issues is actively discouraged.
Furthermore, posting the exact same copy-and-paste text in multiple unrelated threads may be regarded as spamming.

Inofficial first vice president of the Rust Evangelism Strike Force

Offline

Pages: 1

Board footer

Powered by FluxBB