Arch Linux

tigerjack

Member

Registered: 2017-08-20

Posts: 98

USB bluetooth not recognized

I purchased a bluetooth USB adapter, but it's not working.
I installed the bluez package as per the wiki's instructions, and also the deprecated package.

rfkill list, and hciconfig -a returns nothing.

#>dmesg | grep -i blue
[  256.775144] Bluetooth: Core ver 2.22
[  256.775169] NET: Registered PF_BLUETOOTH protocol family
[  256.775171] Bluetooth: HCI device and connection manager initialized
[  256.775175] Bluetooth: HCI socket layer initialized
[  256.775177] Bluetooth: L2CAP socket layer initialized
[  256.775180] Bluetooth: SCO socket layer initialized
[  278.366191] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  278.366195] Bluetooth: BNEP filters: protocol multicast
[  278.366199] Bluetooth: BNEP socket layer initialized

On inserting the usb stick

 #>dmesg -w
[  190.992253] usb 1-3: new full-speed USB device number 8 using xhci_hcd
[  191.352068] usb 1-3: New USB device found, idVendor=0a12, idProduct=4010, bcdDevice=21.18
[  191.352074] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  191.358875] hub 1-3:1.0: USB hub found
[  191.361805] hub 1-3:1.0: 4 ports detected
[  191.672248] usb 1-3.1: new full-speed USB device number 9 using xhci_hcd
[  191.950747] usb 1-3.1: New USB device found, idVendor=0a12, idProduct=4007, bcdDevice=30.91
[  191.950754] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  191.950757] usb 1-3.1: Product: YET-LE10
[  191.950759] usb 1-3.1: Manufacturer: TaiYiLian
[  191.950762] usb 1-3.1: SerialNumber: 20250117V1.0.0
[  191.978983] input: TaiYiLian YET-LE10 Consumer Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:0A12:4007.0009/input/input23
[  192.029336] input: TaiYiLian YET-LE10 as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:0A12:4007.0009/input/input24
[  192.040360] hid-generic 0003:0A12:4007.0009: input,hiddev97,hidraw3: USB HID v1.11 Device [TaiYiLian YET-LE10] on usb-0000:01:00.0-3.1/input0
[  192.051113] hid-generic 0003:0A12:4007.000A: hiddev98,hidraw4: USB HID v1.11 Device [TaiYiLian YET-LE10] on usb-0000:01:00.0-3.1/input1

$>lsusb -t
/:  Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/9p, 480M
    |__ Port 003: Dev 006, If 0, Class=Hub, Driver=hub/4p, 12M
        |__ Port 001: Dev 007, If 0, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 001: Dev 007, If 1, Class=Human Interface Device, Driver=usbhid, 12M
        |__ Port 001: Dev 007, If 2, Class=Audio, Driver=snd-usb-audio, 12M
        |__ Port 001: Dev 007, If 3, Class=Audio, Driver=snd-usb-audio, 12M

Lone_Wolf

Administrator

From: Netherlands, Europe

Registered: 2005-10-04

Posts: 14,482

Re: USB bluetooth not recognized

Duplicate of https://bbs.archlinux.org/viewtopic.php?id=308484

Closing.

---

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky