You are not logged in.

Pages: 1

#1 2025-10-08 02:45:04

Player_X_YT
Member
Registered: 2023-09-26
Posts: 11

AUX microphone not detected

My PC detects my USB microphone but doesn't detect my AUX microphone at all, not in KDE, not in pavuctl, not in pactl list sources. I am using an ASUS motherboard and an AMD CPU if it's relevant. All ports (front, rear microphone and rear line in) do not work and the microphone is never detected, not just flat-lining.

[playerxyt@playerspc a]$ pactl list sources
Source #60
	State: SUSPENDED
	Name: alsa_output.pci-0000_0b_00.1.hdmi-stereo.monitor
	Description: Monitor of GA102 High Definition Audio Controller Digital Stereo (HDMI)
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_0b_00.1.hdmi-stereo
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.class = "generic"
		alsa.components = "HDA:10de009a,14584085,00100100"
		alsa.device = "3"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "HDMI 0"
		alsa.long_card_name = "HDA NVidia at 0xfc080000 irq 108"
		alsa.mixer_name = "Nvidia GPU 9a HDMI/DP"
		alsa.name = "PHL 278E1"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HDA NVidia at 0xfc080000 irq 108"
		api.alsa.card.name = "HDA NVidia"
		api.alsa.path = "hdmi:1"
		api.alsa.pcm.card = "1"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "4"
		device.api = "alsa"
		device.bus = "pci"
		device.class = "monitor"
		device.icon_name = "audio-card-analog"
		device.id = "48"
		device.profile.description = "Digital Stereo (HDMI)"
		device.profile.name = "hdmi-stereo"
		device.routes = "1"
		factory.name = "api.alsa.pcm.sink"
		iec958.codecs = "[\"PCM\"]"
		media.class = "Audio/Sink"
		device.description = "GA102 High Definition Audio Controller"
		node.name = "alsa_output.pci-0000_0b_00.1.hdmi-stereo"
		node.nick = "PHL 278E1"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:NVidia:4:playback"
		port.group = "playback"
		priority.driver = "696"
		priority.session = "696"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "60"
		object.serial = "60"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "1"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus_path = "pci-0000:0b:00.1"
		device.enum.api = "udev"
		device.name = "alsa_card.pci-0000_0b_00.1"
		device.nick = "HDA NVidia"
		device.plugged.usec = "6205674"
		device.product.id = "0x1aef"
		device.product.name = "GA102 High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card1"
		device.vendor.id = "0x10de"
		device.vendor.name = "NVIDIA Corporation"
		spa.object.id = "4"
		device.string = "1"
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, availability group: Legacy 1, available)
	Active Port: hdmi-output-0
	Formats:
		pcm

Source #61
	State: SUSPENDED
	Name: alsa_input.usb-0c76_USB_PnP_Audio_Device-00.mono-fallback
	Description: USB PnP Audio Device Mono
	Driver: PipeWire
	Sample Specification: s16le 1ch 48000Hz
	Channel Map: mono
	Owner Module: 4294967295
	Mute: no
	Volume: mono: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 19944 /  30% / -31.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "0"
		alsa.card_name = "USB PnP Audio Device"
		alsa.class = "generic"
		alsa.components = "USB0c76:161e"
		alsa.device = "0"
		alsa.driver_name = "snd_usb_audio"
		alsa.id = "USB Audio"
		alsa.long_card_name = "USB PnP Audio Device at usb-0000:0d:00.3-2, full speed"
		alsa.mixer_name = "USB Mixer"
		alsa.name = "USB Audio"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "USB PnP Audio Device at usb-0000:0d:00.3-2, full speed"
		api.alsa.card.name = "USB PnP Audio Device"
		api.alsa.path = "hw:0"
		api.alsa.pcm.card = "0"
		api.alsa.pcm.stream = "capture"
		audio.channels = "1"
		audio.position = "MONO"
		card.profile.device = "1"
		device.api = "alsa"
		device.bus = "usb"
		device.class = "sound"
		device.icon_name = "audio-card-analog"
		device.id = "49"
		device.profile.description = "Mono"
		device.profile.name = "mono-fallback"
		device.routes = "1"
		factory.name = "api.alsa.pcm.source"
		media.class = "Audio/Source"
		device.description = "USB PnP Audio Device"
		node.name = "alsa_input.usb-0c76_USB_PnP_Audio_Device-00.mono-fallback"
		node.nick = "USB PnP Audio Device"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Device:1:capture"
		port.group = "capture"
		priority.driver = "2100"
		priority.session = "2100"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "34"
		object.serial = "61"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus-id = "usb-0c76_USB_PnP_Audio_Device-00"
		device.bus_path = "pci-0000:0d:00.3-usb-0:2:1.0"
		device.enum.api = "udev"
		device.name = "alsa_card.usb-0c76_USB_PnP_Audio_Device-00"
		device.nick = "USB PnP Audio Device"
		device.plugged.usec = "6224282"
		device.product.id = "0x161e"
		device.product.name = "USB PnP Audio Device"
		device.serial = "0c76_USB_PnP_Audio_Device"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb3/3-2/3-2:1.0/sound/card0"
		device.vendor.id = "0x0c76"
		device.vendor.name = "JMTek, LLC."
		spa.object.id = "2"
		device.string = "0"
	Ports:
		analog-input-mic: Microphone (type: Mic, priority: 8700, availability unknown)
	Active Port: analog-input-mic
	Formats:
		pcm

Source #62
	State: SUSPENDED
	Name: alsa_output.pci-0000_0d_00.4.analog-stereo.monitor
	Description: Monitor of Starship/Matisse HD Audio Controller Analog Stereo
	Driver: PipeWire
	Sample Specification: s32le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: alsa_output.pci-0000_0d_00.4.analog-stereo
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.class = "generic"
		alsa.components = "HDA:10ec0887,104386c7,00100302"
		alsa.device = "0"
		alsa.driver_name = "snd_hda_intel"
		alsa.id = "ALC887-VD Analog"
		alsa.long_card_name = "HD-Audio Generic at 0xfc800000 irq 110"
		alsa.mixer_name = "Realtek ALC887-VD"
		alsa.name = "ALC887-VD Analog"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc800000 irq 110"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "front:2"
		api.alsa.pcm.card = "2"
		api.alsa.pcm.stream = "playback"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "5"
		device.api = "alsa"
		device.bus = "pci"
		device.class = "monitor"
		device.icon_name = "audio-card-analog"
		device.id = "50"
		device.profile.description = "Analog Stereo"
		device.profile.name = "analog-stereo"
		device.routes = "2"
		factory.name = "api.alsa.pcm.sink"
		media.class = "Audio/Sink"
		device.description = "Starship/Matisse HD Audio Controller"
		node.name = "alsa_output.pci-0000_0d_00.4.analog-stereo"
		node.nick = "ALC887-VD Analog"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:Generic:5:playback"
		port.group = "playback"
		priority.driver = "1009"
		priority.session = "1009"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "45"
		object.serial = "62"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "2"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus_path = "pci-0000:0d:00.4"
		device.enum.api = "udev"
		device.name = "alsa_card.pci-0000_0d_00.4"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "6235428"
		device.product.id = "0x1487"
		device.product.name = "Starship/Matisse HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		spa.object.id = "6"
		device.string = "2"
	Ports:
		analog-output-lineout: Line Out (type: Line, priority: 9000, availability group: Legacy 4, available)
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, availability group: Legacy 5, not available)
	Active Port: analog-output-lineout
	Formats:
		pcm

Source #643
	State: SUSPENDED
	Name: alsa_input.usb-MACROSILICON_USB_Video-02.analog-stereo
	Description: USB Video Analog Stereo
	Driver: PipeWire
	Sample Specification: s16le 2ch 48000Hz
	Channel Map: front-left,front-right
	Owner Module: 4294967295
	Mute: no
	Volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	Base Volume: 65536 / 100% / 0.00 dB
	Monitor of Sink: n/a
	Latency: 0 usec, configured 0 usec
	Flags: HARDWARE DECIBEL_VOLUME LATENCY 
	Properties:
		alsa.card = "3"
		alsa.card_name = "MS2109"
		alsa.class = "generic"
		alsa.components = "USB534d:2109"
		alsa.device = "0"
		alsa.driver_name = "snd_usb_audio"
		alsa.id = "USB Audio"
		alsa.long_card_name = "MacroSilicon MS2109 at usb-0000:02:00.0-2, high speed"
		alsa.mixer_name = "USB Mixer"
		alsa.name = "USB Audio"
		alsa.resolution_bits = "16"
		alsa.subclass = "generic-mix"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.sync.id = "00000000:00000000:00000000:00000000"
		api.alsa.card.longname = "MacroSilicon MS2109 at usb-0000:02:00.0-2, high speed"
		api.alsa.card.name = "MS2109"
		api.alsa.path = "front:3"
		api.alsa.pcm.card = "3"
		api.alsa.pcm.stream = "capture"
		audio.channels = "2"
		audio.position = "FL,FR"
		card.profile.device = "0"
		device.api = "alsa"
		device.bus = "usb"
		device.class = "sound"
		device.icon_name = "audio-card-analog"
		device.id = "47"
		device.profile.description = "Analog Stereo"
		device.profile.name = "analog-stereo"
		device.routes = "1"
		factory.name = "api.alsa.pcm.source"
		media.class = "Audio/Source"
		device.description = "USB Video"
		node.name = "alsa_input.usb-MACROSILICON_USB_Video-02.analog-stereo"
		node.nick = "MS2109"
		node.pause-on-idle = "false"
		object.path = "alsa:acp:MS2109:0:capture"
		port.group = "capture"
		priority.driver = "2109"
		priority.session = "2109"
		factory.id = "19"
		clock.quantum-limit = "8192"
		client.id = "46"
		node.driver = "true"
		node.loop.name = "data-loop.0"
		library.name = "audioconvert/libspa-audioconvert"
		object.id = "59"
		object.serial = "643"
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "3"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio3"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.bus-id = "usb-MACROSILICON_USB_Video-02"
		device.bus_path = "pci-0000:02:00.0-usb-0:2:1.2"
		device.enum.api = "udev"
		device.form_factor = "webcam"
		device.name = "alsa_card.usb-MACROSILICON_USB_Video-02"
		device.nick = "MS2109"
		device.plugged.usec = "6228934"
		device.product.id = "0x2109"
		device.product.name = "USB Video"
		device.serial = "MACROSILICON_USB_Video"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2:1.2/sound/card3"
		device.vendor.id = "0x534d"
		device.vendor.name = "MacroSilicon"
		spa.object.id = "8"
		device.string = "3"
	Ports:
		analog-input: Analog Input (type: Analog, priority: 10000, availability unknown)
	Active Port: analog-input
	Formats:
		pcm

Where USB Video Analog Stereo is my crappy amazon capture card and USB PnP Audio Device Mono is my USB microphone that works fine.

Based on a reddit thread I can disable snd_hda_intel however not only does this not solve the problem but it also deletes my output devices (HDMI monitor and headphones) either I don't have access to sof-audio-pci-intel-cnl (I have extra/sof-firmware installed) or I need the old driver for some reason. I am very out of my depth when messing with kernel modules.

One last note: Starship/Matisse HD Audio Controller Analog Stereo is the name of the output for my headphones, not sure if that helps or not though but they are part of the same motherboard and source #62 has a similar name.

Last edited by Player_X_YT (2025-10-08 02:45:59)

Offline

#2 2025-10-08 10:46:18

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 24,778

Re: AUX microphone not detected

Post the output of 

pactl list cards
arecord -lL
sudo journalctl -b |  curl -F 'file=@-' 0x0.st

Offline

#3 2025-10-08 15:43:50

Player_X_YT
Member
Registered: 2023-09-26
Posts: 11

Re: AUX microphone not detected

[playerxyt@playerspc ~]$ pactl list cards
Card #47
	Name: alsa_card.usb-MACROSILICON_USB_Video-02
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "3"
		api.alsa.card.longname = "MacroSilicon MS2109 at usb-0000:02:00.0-2, high speed"
		api.alsa.card.name = "MS2109"
		api.alsa.path = "hw:3"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio3"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "usb"
		device.bus-id = "usb-MACROSILICON_USB_Video-02"
		device.bus_path = "pci-0000:02:00.0-usb-0:2:1.2"
		device.description = "USB Video"
		device.enum.api = "udev"
		device.form_factor = "webcam"
		device.icon_name = "camera-web-analog-usb"
		device.name = "alsa_card.usb-MACROSILICON_USB_Video-02"
		device.nick = "MS2109"
		device.plugged.usec = "6113923"
		device.product.id = "0x2109"
		device.product.name = "USB Video"
		device.serial = "MACROSILICON_USB_Video"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-2/1-2:1.2/sound/card3"
		device.vendor.id = "0x534d"
		device.vendor.name = "MacroSilicon"
		media.class = "Audio/Device"
		spa.object.id = "8"
		factory.id = "15"
		client.id = "46"
		object.id = "47"
		object.serial = "47"
		object.path = "alsa:acp:MS2109"
		alsa.card = "3"
		alsa.card_name = "MS2109"
		alsa.long_card_name = "MacroSilicon MS2109 at usb-0000:02:00.0-2, high speed"
		alsa.driver_name = "snd_usb_audio"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB534d:2109"
		alsa.id = "MS2109"
		device.string = "3"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
		input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
		pro-audio: Pro Audio (sinks: 0, sources: 1, priority: 1, available: yes)
	Active Profile: input:analog-stereo
	Ports:
		analog-input: Analog Input (type: Analog, priority: 10000, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "analog"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo
		iec958-stereo-input: Digital Input (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "spdif"
				card.profile.port = "1"
			Part of profile(s): input:iec958-stereo

Card #48
	Name: alsa_card.pci-0000_0b_00.1
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "1"
		api.alsa.card.longname = "HDA NVidia at 0xfc080000 irq 108"
		api.alsa.card.name = "HDA NVidia"
		api.alsa.path = "hw:1"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio1"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:0b:00.1"
		device.description = "GA102 High Definition Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_0b_00.1"
		device.nick = "HDA NVidia"
		device.plugged.usec = "6102325"
		device.product.id = "0x1aef"
		device.product.name = "GA102 High Definition Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:0b:00.1/sound/card1"
		device.vendor.id = "0x10de"
		device.vendor.name = "NVIDIA Corporation"
		media.class = "Audio/Device"
		spa.object.id = "4"
		factory.id = "15"
		client.id = "46"
		object.id = "48"
		object.serial = "48"
		object.path = "alsa:acp:NVidia"
		alsa.card = "1"
		alsa.card_name = "HDA NVidia"
		alsa.long_card_name = "HDA NVidia at 0xfc080000 irq 108"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Nvidia GPU 9a HDMI/DP"
		alsa.components = "HDA:10de009a,14584085,00100100"
		alsa.id = "NVidia"
		device.string = "1"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5900, available: yes)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (sinks: 1, sources: 0, priority: 5700, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (sinks: 1, sources: 0, priority: 600, available: no)
		pro-audio: Pro Audio (sinks: 4, sources: 0, priority: 1, available: yes)
	Active Profile: output:hdmi-stereo
	Ports:
		hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, availability group: Legacy 1, available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 1"
				device.icon_name = "video-display"
				card.profile.port = "0"
				device.product.name = "PHL 278E1"
				iec958.codecs.detected = "[\"PCM\"]"
			Part of profile(s): output:hdmi-stereo
		hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 2"
				device.icon_name = "video-display"
				card.profile.port = "1"
			Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
		hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 3"
				device.icon_name = "video-display"
				card.profile.port = "2"
			Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
		hdmi-output-3: HDMI / DisplayPort 4 (type: HDMI, priority: 5600, latency offset: 0 usec, availability group: Legacy 4, not available)
			Properties:
				port.type = "hdmi"
				port.availability-group = "Legacy 4"
				device.icon_name = "video-display"
				card.profile.port = "3"
			Part of profile(s): output:hdmi-stereo-extra3, output:hdmi-surround-extra3, output:hdmi-surround71-extra3

Card #49
	Name: alsa_card.usb-0c76_USB_PnP_Audio_Device-00
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "0"
		api.alsa.card.longname = "USB PnP Audio Device at usb-0000:0d:00.3-2, full speed"
		api.alsa.card.name = "USB PnP Audio Device"
		api.alsa.path = "hw:0"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio0"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "usb"
		device.bus-id = "usb-0c76_USB_PnP_Audio_Device-00"
		device.bus_path = "pci-0000:0d:00.3-usb-0:2:1.0"
		device.description = "USB PnP Audio Device"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-usb"
		device.name = "alsa_card.usb-0c76_USB_PnP_Audio_Device-00"
		device.nick = "USB PnP Audio Device"
		device.plugged.usec = "6108457"
		device.product.id = "0x161e"
		device.product.name = "USB PnP Audio Device"
		device.serial = "0c76_USB_PnP_Audio_Device"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb3/3-2/3-2:1.0/sound/card0"
		device.vendor.id = "0x0c76"
		device.vendor.name = "JMTek, LLC."
		media.class = "Audio/Device"
		spa.object.id = "2"
		factory.id = "15"
		client.id = "46"
		object.id = "49"
		object.serial = "49"
		object.path = "alsa:acp:Device"
		alsa.card = "0"
		alsa.card_name = "USB PnP Audio Device"
		alsa.long_card_name = "USB PnP Audio Device at usb-0000:0d:00.3-2, full speed"
		alsa.driver_name = "snd_usb_audio"
		alsa.mixer_name = "USB Mixer"
		alsa.components = "USB0c76:161e"
		alsa.id = "Device"
		device.string = "0"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		pro-audio: Pro Audio (sinks: 0, sources: 1, priority: 1, available: yes)
		input:mono-fallback: Mono Input (sinks: 0, sources: 1, priority: 1, available: yes)
	Active Profile: input:mono-fallback
	Ports:
		analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "mic"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:mono-fallback

Card #50
	Name: alsa_card.pci-0000_0d_00.4
	Driver: alsa
	Owner Module: n/a
	Properties:
		api.acp.auto-port = "false"
		api.acp.auto-profile = "false"
		api.alsa.card = "2"
		api.alsa.card.longname = "HD-Audio Generic at 0xfc800000 irq 110"
		api.alsa.card.name = "HD-Audio Generic"
		api.alsa.path = "hw:2"
		api.alsa.split-enable = "true"
		api.alsa.use-acp = "true"
		api.dbus.ReserveDevice1 = "Audio2"
		api.dbus.ReserveDevice1.Priority = "-20"
		device.api = "alsa"
		device.bus = "pci"
		device.bus_path = "pci-0000:0d:00.4"
		device.description = "Starship/Matisse HD Audio Controller"
		device.enum.api = "udev"
		device.icon_name = "audio-card-analog-pci"
		device.name = "alsa_card.pci-0000_0d_00.4"
		device.nick = "HD-Audio Generic"
		device.plugged.usec = "6127243"
		device.product.id = "0x1487"
		device.product.name = "Starship/Matisse HD Audio Controller"
		device.subsystem = "sound"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card2"
		device.vendor.id = "0x1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		media.class = "Audio/Device"
		spa.object.id = "6"
		factory.id = "15"
		client.id = "46"
		object.id = "50"
		object.serial = "50"
		object.path = "alsa:acp:Generic"
		alsa.card = "2"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfc800000 irq 110"
		alsa.driver_name = "snd_hda_intel"
		alsa.mixer_name = "Realtek ALC887-VD"
		alsa.components = "HDA:10ec0887,104386c7,00100302"
		alsa.id = "Generic"
		device.string = "2"
	Profiles:
		off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6565, available: yes)
		output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6500, available: yes)
		output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5565, available: yes)
		output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
		output:iec958-ac3-surround-51+input:analog-stereo: Digital Surround 5.1 (IEC958/AC3) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 365, available: yes)
		output:iec958-ac3-surround-51: Digital Surround 5.1 (IEC958/AC3) Output (sinks: 1, sources: 0, priority: 300, available: yes)
		input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 65, available: yes)
		pro-audio: Pro Audio (sinks: 2, sources: 2, priority: 1, available: yes)
	Active Profile: output:analog-stereo
	Ports:
		analog-input-front-mic: Front Microphone (type: Mic, priority: 8500, latency offset: 0 usec, availability group: Legacy 1, available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 1"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "0"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-input-rear-mic: Rear Microphone (type: Mic, priority: 8200, latency offset: 0 usec, availability group: Legacy 2, not available)
			Properties:
				port.type = "mic"
				port.availability-group = "Legacy 2"
				device.icon_name = "audio-input-microphone"
				card.profile.port = "1"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-input-linein: Line In (type: Line, priority: 8100, latency offset: 0 usec, availability group: Legacy 3, not available)
			Properties:
				port.type = "line"
				port.availability-group = "Legacy 3"
				card.profile.port = "2"
			Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-ac3-surround-51+input:analog-stereo
		analog-output-lineout: Line Out (type: Line, priority: 9000, latency offset: 0 usec, availability group: Legacy 4, available)
			Properties:
				port.type = "line"
				port.availability-group = "Legacy 4"
				card.profile.port = "3"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, availability group: Legacy 5, not available)
			Properties:
				port.type = "headphones"
				port.availability-group = "Legacy 5"
				device.icon_name = "audio-headphones"
				card.profile.port = "4"
			Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
		iec958-stereo-output: Digital Output (S/PDIF) (type: SPDIF, priority: 0, latency offset: 0 usec, availability unknown)
			Properties:
				port.type = "spdif"
				card.profile.port = "5"
			Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo
[playerxyt@playerspc ~]$ arecord -lL
null
    Discard all samples (playback) or generate zero samples (capture)
sysdefault
    Default Audio Device
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pipewire
    PipeWire Sound Server
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Default ALSA Output (currently PipeWire Media Server)
sysdefault:CARD=Device
    USB PnP Audio Device, USB Audio
    Default Audio Device
front:CARD=Device,DEV=0
    USB PnP Audio Device, USB Audio
    Front output / input
usbstream:CARD=Device
    USB PnP Audio Device
    USB Stream Output
usbstream:CARD=NVidia
    HDA NVidia
    USB Stream Output
sysdefault:CARD=Generic
    HD-Audio Generic, ALC887-VD Analog
    Default Audio Device
front:CARD=Generic,DEV=0
    HD-Audio Generic, ALC887-VD Analog
    Front output / input
usbstream:CARD=Generic
    HD-Audio Generic
    USB Stream Output
sysdefault:CARD=MS2109
    MS2109, USB Audio
    Default Audio Device
front:CARD=MS2109,DEV=0
    MS2109, USB Audio
    Front output / input
usbstream:CARD=MS2109
    MS2109
    USB Stream Output
**** List of CAPTURE Hardware Devices ****
card 0: Device [USB PnP Audio Device], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 2: Generic [HD-Audio Generic], device 2: ALC887-VD Alt Analog [ALC887-VD Alt Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 3: MS2109 [MS2109], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
[playerxyt@playerspc ~]$ sudo journalctl -b | curl -F 'file=@-' 0x0.st
http://0x0.st/Ku1v.txt

Last edited by Player_X_YT (2025-10-08 15:54:43)

Offline

Pages: 1

Board footer

Powered by FluxBB