Arch Linux

brogolem35

Member

Registered: 2023-10-21

Posts: 19

After installing new RAM: adapter quirk: no zero length

This message started to show up on my boot logs after I changed my system RAM:

[    8.395425] i2c i2c-0: adapter quirk: no zero length (addr 0x0018, size 0, write)
[    8.395431] i2c i2c-0: adapter quirk: no zero length (addr 0x0019, size 0, write)
[    8.395433] i2c i2c-0: adapter quirk: no zero length (addr 0x001a, size 0, write)
[    8.395435] i2c i2c-0: adapter quirk: no zero length (addr 0x001b, size 0, write)
[    8.395438] i2c i2c-0: adapter quirk: no zero length (addr 0x001c, size 0, write)
[    8.395440] i2c i2c-0: adapter quirk: no zero length (addr 0x001d, size 0, write)
[    8.395442] i2c i2c-0: adapter quirk: no zero length (addr 0x001e, size 0, write)
[    8.395444] i2c i2c-0: adapter quirk: no zero length (addr 0x001f, size 0, write)
[    8.395447] i2c i2c-1: adapter quirk: no zero length (addr 0x0018, size 0, write)
[    8.395450] i2c i2c-1: adapter quirk: no zero length (addr 0x0019, size 0, write)

Old RAMs:
GASB48GB3600C18BSC x2

New RAMs:
F4-3200C16D-32GVK x2

Specs:
Kernel: Linux 6.17.5-arch1-1
Motherboard: Asus PRIME A520M-K
CPU: AMD Ryzen 7 PRO 4750G
GPU: AMD Radeon RX 6700 XT

Notes:
I have reset my BIOS and updated the firmware.
No overclocking is done and XMP is disabled.
Memtest86+ shown no errors.