You are not logged in.
- Topics: Active | Unanswered
#26 2025-11-23 07:57:32
- LogicalKarma
- Member
- Registered: 2024-05-19
- Posts: 30
Re: Popping and buzzing in pipewire
Removed microphone and all but one monitor: issue persists
Removed microphone and all but another monitor: issue persists
I would rather not disable/remove my sound card. I did not even own it when I started this topic so I highly doubt it's the cause.
Offline
#27 2025-11-23 20:03:52
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 71,584
Re: Popping and buzzing in pipewire
https://bbs.archlinux.org/viewtopic.php?id=310368 is somewhat interesting - if you set the master to 100% and lower the pcm, do you still get the crackling?
Offline
#28 2025-11-23 21:15:52
- LogicalKarma
- Member
- Registered: 2024-05-19
- Posts: 30
Re: Popping and buzzing in pipewire
Played around a bit in alsamixer, but I don't have good news. Lowering the PCM and Master to ~60 causes the issues to be more mild due to the volume. Lowering the PCM to ~60% and leaving master at 100% still has issues and the same vice versa.
Offline
#29 2025-11-26 21:28:48
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 71,584
Re: Popping and buzzing in pipewire
Can you record the noise?
Also since I'm just looking at it: https://wiki.archlinux.org/title/Advanc … connector)
Some unconnected (analog) mic-input might be collecting dust?
Offline