You are not logged in.

Pages: 1

#1 2025-12-09 09:40:38

ElricleNecro
Member
Registered: 2015-10-11
Posts: 10

[SOLVED] Black screen after resuming from suspend

Hi,

Not sure if Newbie Corner is appropriate for this question, but as I am unsure of the origin of the problem, I don't know which section would be more fitting.

I have a problem specific to X11 (I don't have it on Wayland). When I put my computer to sleep with `systemctl suspend`, and I try to wake it up, I only have a black screen, no cursor and my keyboard does not seems to work (I can't switch to a TTY). But, when I ssh onto it, and kill awesome (or i3), I'm sent back to the TTY, as expected.

My main idea was a problem linked to Nvidia, but I don't see why I couldn't reproduce it on wayland compositor given Nvidia reputation with those. And I've tried what is in the wiki about black screen and NVidia, but it didn't work. Haven't had any success with what I found on the forum, but I tried a few things, and some may have badly interacted with each others without me noticing it.

I am using `nvidia-open-dkms`, with the default kernel, I have `linux-firmware-nvidia` installed. I term of boot options, for Nvidia, I have 

options nvidia-drm modeset=1 fbdev=1

in `/etc/modprobe.d/nvidia-power-management.conf`

I haven't seen anything useful, or at least that speak to me, in the logs.

Here are some log after the resume started.
`dmesg`:

[ 3518.983329] ACPI: PM: Low-level resume complete
[ 3518.983348] ACPI: PM: Restoring platform NVS memory
[ 3518.983517] LVT offset 0 assigned for vector 0x400
[ 3518.984164] Enabling non-boot CPUs ...
[ 3518.984279] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 3518.987834] CPU1 is up
[ 3518.987864] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 3518.991076] CPU2 is up
[ 3518.991101] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 3518.994654] CPU3 is up
[ 3518.994672] smpboot: Booting Node 0 Processor 4 APIC 0x8
[ 3518.997869] CPU4 is up
[ 3518.997893] smpboot: Booting Node 0 Processor 5 APIC 0xa
[ 3519.001115] CPU5 is up
[ 3519.001136] smpboot: Booting Node 0 Processor 6 APIC 0xc
[ 3519.004695] CPU6 is up
[ 3519.004712] smpboot: Booting Node 0 Processor 7 APIC 0xe
[ 3519.007970] CPU7 is up
[ 3519.007995] smpboot: Booting Node 0 Processor 8 APIC 0x1
[ 3519.011204] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 3519.011232] CPU8 is up
[ 3519.011252] smpboot: Booting Node 0 Processor 9 APIC 0x3
[ 3519.014859] CPU9 is up
[ 3519.014877] smpboot: Booting Node 0 Processor 10 APIC 0x5
[ 3519.018187] CPU10 is up
[ 3519.018207] smpboot: Booting Node 0 Processor 11 APIC 0x7
[ 3519.021886] CPU11 is up
[ 3519.021906] smpboot: Booting Node 0 Processor 12 APIC 0x9
[ 3519.025252] CPU12 is up
[ 3519.025273] smpboot: Booting Node 0 Processor 13 APIC 0xb
[ 3519.028915] CPU13 is up
[ 3519.028937] smpboot: Booting Node 0 Processor 14 APIC 0xd
[ 3519.032583] CPU14 is up
[ 3519.032619] smpboot: Booting Node 0 Processor 15 APIC 0xf
[ 3519.036026] CPU15 is up
[ 3519.037577] ACPI: PM: Waking up from system sleep state S3
[ 3519.058247] pcieport 0000:00:01.2: PME: Spurious native interrupt!
[ 3519.082840] nvme nvme1: 8/0/0 default/read/poll queues
[ 3519.086102] nvme nvme1: Ignoring bogus Namespace Identifiers
[ 3519.289676] usb 1-1: reset full-speed USB device number 2 using xhci_hcd
[ 3519.337334] nvme nvme0: 16/0/0 default/read/poll queues
[ 3519.363653] ata4: SATA link down (SStatus 0 SControl 300)
[ 3519.363971] ata9: SATA link down (SStatus 0 SControl 300)
[ 3519.364274] ata10: SATA link down (SStatus 0 SControl 300)
[ 3519.364352] ata3: SATA link down (SStatus 0 SControl 300)
[ 3519.364353] ata5: SATA link down (SStatus 0 SControl 300)
[ 3519.583835] OOM killer enabled.
[ 3519.583837] Restarting tasks: Starting
[ 3519.585766] Restarting tasks: Done
[ 3519.585786] random: crng reseeded on system resumption
[ 3519.585805] PM: suspend exit
[ 3522.264948] igc 0000:07:00.0 enp7s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 3523.301412] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3523.350874] sd 5:0:0:0: [sda] Starting disk
[ 3523.400112] ata6.00: configured for UDMA/133
[ 3686.356138] usb 8-4: reset SuperSpeed USB device number 2 using xhci_hcd
[ 4272.503680] kitty[4176]: segfault at c8 ip 00007fb1d2a39e77 sp 00007ffe147a8670 error 4 in libnvidia-glcore.so.580.105.08[a39e77,7fb1d2400000+c00000] likely on CPU 8 (core 0, socket 0)
[ 4272.503690] Code: 64 48 8b 00 48 85 c0 74 95 83 b8 08 01 00 00 13 77 8c 80 b8 50 aa 09 00 00 74 83 e9 03 b2 87 ff 0f 1f 00 48 8b 85 e0 01 00 00 <80> b8 c8 00 00 00 00 0f 89 d7 fd ff ff 4c 8d 74 24 20 31 f6 48 89

`Xorg.0.log`:

[ 3518.983329] ACPI: PM: Low-level resume complete
[ 3518.983348] ACPI: PM: Restoring platform NVS memory
[ 3518.983517] LVT offset 0 assigned for vector 0x400
[ 3518.984164] Enabling non-boot CPUs ...
[ 3518.984279] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 3518.987834] CPU1 is up
[ 3518.987864] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 3518.991076] CPU2 is up
[ 3518.991101] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 3518.994654] CPU3 is up
[ 3518.994672] smpboot: Booting Node 0 Processor 4 APIC 0x8
[ 3518.997869] CPU4 is up
[ 3518.997893] smpboot: Booting Node 0 Processor 5 APIC 0xa
[ 3519.001115] CPU5 is up
[ 3519.001136] smpboot: Booting Node 0 Processor 6 APIC 0xc
[ 3519.004695] CPU6 is up
[ 3519.004712] smpboot: Booting Node 0 Processor 7 APIC 0xe
[ 3519.007970] CPU7 is up
[ 3519.007995] smpboot: Booting Node 0 Processor 8 APIC 0x1
[ 3519.011204] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 3519.011232] CPU8 is up
[ 3519.011252] smpboot: Booting Node 0 Processor 9 APIC 0x3
[ 3519.014859] CPU9 is up
[ 3519.014877] smpboot: Booting Node 0 Processor 10 APIC 0x5
[ 3519.018187] CPU10 is up
[ 3519.018207] smpboot: Booting Node 0 Processor 11 APIC 0x7
[ 3519.021886] CPU11 is up
[ 3519.021906] smpboot: Booting Node 0 Processor 12 APIC 0x9
[ 3519.025252] CPU12 is up
[ 3519.025273] smpboot: Booting Node 0 Processor 13 APIC 0xb
[ 3519.028915] CPU13 is up
[ 3519.028937] smpboot: Booting Node 0 Processor 14 APIC 0xd
[ 3519.032583] CPU14 is up
[ 3519.032619] smpboot: Booting Node 0 Processor 15 APIC 0xf
[ 3519.036026] CPU15 is up
[ 3519.037577] ACPI: PM: Waking up from system sleep state S3
[ 3519.058247] pcieport 0000:00:01.2: PME: Spurious native interrupt!
[ 3519.082840] nvme nvme1: 8/0/0 default/read/poll queues
[ 3519.086102] nvme nvme1: Ignoring bogus Namespace Identifiers
[ 3519.289676] usb 1-1: reset full-speed USB device number 2 using xhci_hcd
[ 3519.337334] nvme nvme0: 16/0/0 default/read/poll queues
[ 3519.363653] ata4: SATA link down (SStatus 0 SControl 300)
[ 3519.363971] ata9: SATA link down (SStatus 0 SControl 300)
[ 3519.364274] ata10: SATA link down (SStatus 0 SControl 300)
[ 3519.364352] ata3: SATA link down (SStatus 0 SControl 300)
[ 3519.364353] ata5: SATA link down (SStatus 0 SControl 300)
[ 3519.583835] OOM killer enabled.
[ 3519.583837] Restarting tasks: Starting
[ 3519.585766] Restarting tasks: Done
[ 3519.585786] random: crng reseeded on system resumption
[ 3519.585805] PM: suspend exit
[ 3522.264948] igc 0000:07:00.0 enp7s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 3523.301412] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3523.350874] sd 5:0:0:0: [sda] Starting disk
[ 3523.400112] ata6.00: configured for UDMA/133
[ 3686.356138] usb 8-4: reset SuperSpeed USB device number 2 using xhci_hcd
[ 4272.503680] kitty[4176]: segfault at c8 ip 00007fb1d2a39e77 sp 00007ffe147a8670 error 4 in libnvidia-glcore.so.580.105.08[a39e77,7fb1d2400000+c00000] likely on CPU 8 (core 0, socket 0)
[ 4272.503690] Code: 64 48 8b 00 48 85 c0 74 95 83 b8 08 01 00 00 13 77 8c 80 b8 50 aa 09 00 00 74 83 e9 03 b2 87 ff 0f 1f 00 48 8b 85 e0 01 00 00 <80> b8 c8 00 00 00 00 0f 89 d7 fd ff ff 4c 8d 74 24 20 31 f6 48 89

When starting a new X session, the log looks like that :

[  4280.050] 
X.Org X Server 1.21.1.21
X Protocol Version 11, Revision 0
[  4280.051] Current Operating System: Linux enterprise 6.17.9-arch1-1 #1 SMP PREEMPT_DYNAMIC Mon, 24 Nov 2025 15:21:09 +0000 x86_64
[  4280.051] Kernel command line: initrd=\amd-ucode.img initrd=\initramfs-linux.img root=UUID=f48a7ba7-1e13-4004-9d8c-a52c19752cc1 rw acpi_os=Linux
[  4280.051]  
[  4280.052] Current version of pixman: 0.46.4
[  4280.054] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  4280.054] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  4280.055] (==) Log file: "/home/spock/.local/share/xorg/Xorg.0.log", Time: Tue Dec  9 09:54:14 2025
[  4280.056] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  4280.056] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  4280.056] (==) No Layout section.  Using the first Screen section.
[  4280.056] (==) No screen section available. Using defaults.
[  4280.056] (**) |-->Screen "Default Screen Section" (0)
[  4280.056] (**) |   |-->Monitor "<default monitor>"
[  4280.056] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  4280.056] (**) Allowing byte-swapped clients
[  4280.056] (==) Automatically adding devices
[  4280.056] (==) Automatically enabling devices
[  4280.056] (==) Automatically adding GPU devices
[  4280.056] (==) Automatically binding GPU devices
[  4280.056] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  4280.056] (WW) The directory "/usr/share/fonts/misc" does not exist.
[  4280.056] 	Entry deleted from font path.
[  4280.056] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[  4280.056] 	Entry deleted from font path.
[  4280.056] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[  4280.056] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[  4280.056] 	Entry deleted from font path.
[  4280.056] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  4280.056] 	Entry deleted from font path.
[  4280.056] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[  4280.056] 	Entry deleted from font path.
[  4280.056] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[  4280.056] 	Entry deleted from font path.
[  4280.056] (==) FontPath set to:
	
[  4280.056] (==) ModulePath set to "/usr/lib/xorg/modules"
[  4280.056] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  4280.056] (II) Module ABI versions:
[  4280.056] 	X.Org ANSI C Emulation: 0.4
[  4280.056] 	X.Org Video Driver: 25.2
[  4280.056] 	X.Org XInput driver : 24.4
[  4280.056] 	X.Org Server Extension : 10.0
[  4280.056] (++) using VT number 1

[  4280.057] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[  4280.058] (II) xfree86: Adding drm device (/dev/dri/card1)
[  4280.058] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:0b:00.0/drm/card1
[  4280.059] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[  4280.061] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[  4280.063] (--) PCI:*(11@0:0:0) 10de:2482:1462:5052 rev 161, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
[  4280.063] (II) LoadModule: "glx"
[  4280.064] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  4280.064] (II) Module glx: vendor="X.Org Foundation"
[  4280.064] 	compiled for 1.21.1.21, module version = 1.0.0
[  4280.064] 	ABI class: X.Org Server Extension, version 10.0
[  4280.064] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[  4280.064] 	loading driver: nvidia
[  4280.064] (==) Matched nvidia as autoconfigured driver 0
[  4280.064] (==) Matched nouveau as autoconfigured driver 1
[  4280.064] (==) Matched nv as autoconfigured driver 2
[  4280.064] (==) Matched modesetting as autoconfigured driver 3
[  4280.064] (==) Matched fbdev as autoconfigured driver 4
[  4280.064] (==) Matched vesa as autoconfigured driver 5
[  4280.064] (==) Assigned the driver to the xf86ConfigLayout
[  4280.064] (II) LoadModule: "nvidia"
[  4280.064] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  4280.065] (II) Module nvidia: vendor="NVIDIA Corporation"
[  4280.065] 	compiled for 1.6.99.901, module version = 1.0.0
[  4280.065] 	Module class: X.Org Video Driver
[  4280.065] (II) LoadModule: "nouveau"
[  4280.065] (WW) Warning, couldn't open module nouveau
[  4280.065] (EE) Failed to load module "nouveau" (module does not exist, 0)
[  4280.065] (II) LoadModule: "nv"
[  4280.065] (WW) Warning, couldn't open module nv
[  4280.065] (EE) Failed to load module "nv" (module does not exist, 0)
[  4280.065] (II) LoadModule: "modesetting"
[  4280.065] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  4280.065] (II) Module modesetting: vendor="X.Org Foundation"
[  4280.065] 	compiled for 1.21.1.21, module version = 1.21.1
[  4280.065] 	Module class: X.Org Video Driver
[  4280.065] 	ABI class: X.Org Video Driver, version 25.2
[  4280.065] (II) LoadModule: "fbdev"
[  4280.065] (WW) Warning, couldn't open module fbdev
[  4280.065] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  4280.065] (II) LoadModule: "vesa"
[  4280.065] (WW) Warning, couldn't open module vesa
[  4280.065] (EE) Failed to load module "vesa" (module does not exist, 0)
[  4280.065] (II) NVIDIA dlloader X Driver  580.105.08  Wed Oct 29 22:16:45 UTC 2025
[  4280.065] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  4280.065] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  4280.065] (II) systemd-logind: releasing fd for 226:1
[  4280.066] (II) Loading sub module "fb"
[  4280.066] (II) LoadModule: "fb"
[  4280.066] (II) Module "fb" already built-in
[  4280.066] (II) Loading sub module "wfb"
[  4280.066] (II) LoadModule: "wfb"
[  4280.066] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  4280.066] (II) Module wfb: vendor="X.Org Foundation"
[  4280.066] 	compiled for 1.21.1.21, module version = 1.0.0
[  4280.066] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  4280.066] (WW) Falling back to old probe method for modesetting
[  4280.066] (EE) open /dev/dri/card0: No such file or directory
[  4280.066] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  4280.066] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  4280.066] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  4280.066] (==) NVIDIA(0): RGB weight 888
[  4280.066] (==) NVIDIA(0): Default visual is TrueColor
[  4280.066] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  4280.066] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[  4280.066] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[  4280.066] (**) NVIDIA(0): Enabling 2D acceleration
[  4280.066] (II) Loading sub module "glxserver_nvidia"
[  4280.066] (II) LoadModule: "glxserver_nvidia"
[  4280.066] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[  4280.075] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[  4280.075] 	compiled for 1.6.99.901, module version = 1.0.0
[  4280.075] 	Module class: X.Org Server Extension
[  4280.075] (II) NVIDIA GLX Module  580.105.08  Wed Oct 29 22:17:01 UTC 2025
[  4280.075] (II) NVIDIA: The X server supports PRIME Render Offload.
[  4280.082] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:11:0:0
[  4280.082] (--) NVIDIA(0):     DFP-0
[  4280.082] (--) NVIDIA(0):     DFP-1
[  4280.082] (--) NVIDIA(0):     DFP-2
[  4280.082] (--) NVIDIA(0):     DFP-3
[  4280.082] (--) NVIDIA(0):     DFP-4 (boot)
[  4280.082] (--) NVIDIA(0):     DFP-5
[  4280.082] (--) NVIDIA(0):     DFP-6
[  4280.121] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3070 Ti (GA104-A) at PCI:11:0:0
[  4280.121] (II) NVIDIA(0):     (GPU-0)
[  4280.121] (--) NVIDIA(0): Memory: 8388608 kBytes
[  4280.121] (--) NVIDIA(0): VideoBIOS: 94.04.65.00.2a
[  4280.121] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  4280.189] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  4280.189] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  4280.189] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[  4280.189] (--) NVIDIA(GPU-0): 
[  4280.189] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  4280.189] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[  4280.189] (--) NVIDIA(GPU-0): DFP-1: 2670.0 MHz maximum pixel clock
[  4280.189] (--) NVIDIA(GPU-0): 
[  4280.190] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  4280.190] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[  4280.190] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[  4280.190] (--) NVIDIA(GPU-0): 
[  4280.190] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  4280.190] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[  4280.190] (--) NVIDIA(GPU-0): DFP-3: 2670.0 MHz maximum pixel clock
[  4280.190] (--) NVIDIA(GPU-0): 
[  4280.287] (--) NVIDIA(GPU-0): Idek Iiyama PL2409HD (DFP-4): connected
[  4280.287] (--) NVIDIA(GPU-0): Idek Iiyama PL2409HD (DFP-4): Internal TMDS
[  4280.287] (--) NVIDIA(GPU-0): Idek Iiyama PL2409HD (DFP-4): 340.0 MHz maximum pixel clock
[  4280.287] (--) NVIDIA(GPU-0): 
[  4280.287] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  4280.287] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[  4280.287] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[  4280.287] (--) NVIDIA(GPU-0): 
[  4280.290] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  4280.290] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[  4280.290] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[  4280.290] (--) NVIDIA(GPU-0): 
[  4280.349] (==) NVIDIA(0): 
[  4280.349] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  4280.349] (==) NVIDIA(0):     will be used as the requested mode.
[  4280.349] (==) NVIDIA(0): 
[  4280.354] (II) NVIDIA(0): Validated MetaModes:
[  4280.354] (II) NVIDIA(0):     "DFP-4:nvidia-auto-select"
[  4280.354] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[  4280.641] (--) NVIDIA(0): DPI set to (93, 94); computed from "UseEdidDpi" X config
[  4280.641] (--) NVIDIA(0):     option
[  4280.641] (II) UnloadModule: "modesetting"
[  4280.641] (II) Unloading modesetting
[  4280.641] (WW) NVIDIA: Failed to bind sideband socket to
[  4280.641] (WW) NVIDIA:     '/var/run/nvidia-xdriver-b4315b13' Permission denied
[  4280.644] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[  4280.644] (II) NVIDIA:     access.
[  4280.660] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[  4280.660] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[  4280.660] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[  4280.660] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[  4280.660] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[  4280.660] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[  4280.660] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[  4280.660] (II) NVIDIA(0):     Config Options in the README.
[  4280.679] (II) NVIDIA(0): Setting mode "DFP-4:nvidia-auto-select"
[  4280.772] (==) NVIDIA(0): Disabling shared memory pixmaps
[  4280.772] (==) NVIDIA(0): Backing store enabled
[  4280.772] (==) NVIDIA(0): Silken mouse enabled
[  4280.772] (==) NVIDIA(0): DPMS enabled
[  4280.772] (II) Loading sub module "dri2"
[  4280.772] (II) LoadModule: "dri2"
[  4280.772] (II) Module "dri2" already built-in
[  4280.772] (II) NVIDIA(0): [DRI2] Setup complete
[  4280.772] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  4280.772] (II) Initializing extension Generic Event Extension
[  4280.772] (II) Initializing extension SHAPE
[  4280.772] (II) Initializing extension MIT-SHM
[  4280.772] (II) Initializing extension XInputExtension
[  4280.772] (II) Initializing extension XTEST
[  4280.772] (II) Initializing extension BIG-REQUESTS
[  4280.772] (II) Initializing extension SYNC
[  4280.772] (II) Initializing extension XKEYBOARD
[  4280.772] (II) Initializing extension XC-MISC
[  4280.772] (II) Initializing extension SECURITY
[  4280.772] (II) Initializing extension XFIXES
[  4280.772] (II) Initializing extension RENDER
[  4280.772] (II) Initializing extension RANDR
[  4280.772] (II) Initializing extension COMPOSITE
[  4280.773] (II) Initializing extension DAMAGE
[  4280.773] (II) Initializing extension MIT-SCREEN-SAVER
[  4280.773] (II) Initializing extension DOUBLE-BUFFER
[  4280.773] (II) Initializing extension RECORD
[  4280.773] (II) Initializing extension DPMS
[  4280.773] (II) Initializing extension Present
[  4280.773] (II) Initializing extension DRI3
[  4280.773] (II) Initializing extension X-Resource
[  4280.773] (II) Initializing extension XVideo
[  4280.773] (II) Initializing extension XVideo-MotionCompensation
[  4280.773] (II) Initializing extension GLX
[  4280.773] (II) Initializing extension GLX
[  4280.773] (II) Indirect GLX disabled.
[  4280.773] (II) GLX: Another vendor is already registered for screen 0
[  4280.773] (II) Initializing extension XFree86-VidModeExtension
[  4280.773] (II) Initializing extension XFree86-DGA
[  4280.773] (II) Initializing extension XFree86-DRI
[  4280.773] (II) Initializing extension DRI2
[  4280.773] (II) Initializing extension NV-GLX
[  4280.773] (II) Initializing extension NV-CONTROL
[  4280.773] (II) Initializing extension XINERAMA
[  4280.841] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  4280.841] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  4280.841] (**) Power Button: Applying InputClass "system-keyboard"
[  4280.841] (II) LoadModule: "libinput"
[  4280.842] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  4280.843] (II) Module libinput: vendor="X.Org Foundation"
[  4280.843] 	compiled for 1.21.1.13, module version = 1.5.0
[  4280.843] 	Module class: X.Org XInput Driver
[  4280.843] 	ABI class: X.Org XInput driver, version 24.4
[  4280.843] (II) Using input driver 'libinput' for 'Power Button'
[  4280.843] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 39 paused 0
[  4280.843] (**) Power Button: always reports core events
[  4280.843] (**) Option "Device" "/dev/input/event1"
[  4280.845] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  4280.845] (II) event1  - Power Button: device is a keyboard
[  4280.845] (II) event1  - Power Button: device removed
[  4280.845] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[  4280.845] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  4280.845] (**) Option "xkb_layout" "fr"
[  4280.855] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  4280.855] (II) event1  - Power Button: device is a keyboard
[  4280.856] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[  4280.856] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  4280.856] (**) Power Button: Applying InputClass "system-keyboard"
[  4280.856] (II) Using input driver 'libinput' for 'Power Button'
[  4280.857] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 42 paused 0
[  4280.857] (**) Power Button: always reports core events
[  4280.857] (**) Option "Device" "/dev/input/event0"
[  4280.857] (II) event0  - Power Button: is tagged by udev as: Keyboard
[  4280.857] (II) event0  - Power Button: device is a keyboard
[  4280.857] (II) event0  - Power Button: device removed
[  4280.857] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[  4280.857] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  4280.857] (**) Option "xkb_layout" "fr"
[  4280.858] (II) event0  - Power Button: is tagged by udev as: Keyboard
[  4280.858] (II) event0  - Power Button: device is a keyboard
[  4280.859] (II) config/udev: Adding input device ZSA Technology Labs Moonlander Mark I (/dev/input/event3)
[  4280.859] (**) ZSA Technology Labs Moonlander Mark I: Applying InputClass "libinput keyboard catchall"
[  4280.859] (**) ZSA Technology Labs Moonlander Mark I: Applying InputClass "system-keyboard"
[  4280.859] (II) Using input driver 'libinput' for 'ZSA Technology Labs Moonlander Mark I'
[  4280.860] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 43 paused 0
[  4280.860] (**) ZSA Technology Labs Moonlander Mark I: always reports core events
[  4280.860] (**) Option "Device" "/dev/input/event3"
[  4280.862] (II) event3  - ZSA Technology Labs Moonlander Mark I: is tagged by udev as: Keyboard
[  4280.862] (II) event3  - ZSA Technology Labs Moonlander Mark I: device is a keyboard
[  4280.862] (II) event3  - ZSA Technology Labs Moonlander Mark I: device removed
[  4280.862] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:03.0/0000:05:00.0/usb1/1-1/1-1:1.0/0003:3297:1969.0003/input/input3/event3"
[  4280.862] (II) XINPUT: Adding extended input device "ZSA Technology Labs Moonlander Mark I" (type: KEYBOARD, id 8)
[  4280.862] (**) Option "xkb_layout" "fr"
[  4280.863] (II) event3  - ZSA Technology Labs Moonlander Mark I: is tagged by udev as: Keyboard
[  4280.863] (II) event3  - ZSA Technology Labs Moonlander Mark I: device is a keyboard
[  4280.864] (II) config/udev: Adding input device ZSA Technology Labs Moonlander Mark I (/dev/input/event5)
[  4280.864] (**) ZSA Technology Labs Moonlander Mark I: Applying InputClass "libinput pointer catchall"
[  4280.864] (II) Using input driver 'libinput' for 'ZSA Technology Labs Moonlander Mark I'
[  4280.916] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 44 paused 0
[  4280.916] (**) ZSA Technology Labs Moonlander Mark I: always reports core events
[  4280.916] (**) Option "Device" "/dev/input/event5"
[  4280.918] (II) event5  - ZSA Technology Labs Moonlander Mark I: is tagged by udev as: Mouse
[  4280.918] (II) event5  - ZSA Technology Labs Moonlander Mark I: device is a pointer
[  4280.918] (II) event5  - ZSA Technology Labs Moonlander Mark I: device removed
[  4280.918] (II) libinput: ZSA Technology Labs Moonlander Mark I: Step value 0 was provided, libinput Fallback acceleration function is used.
[  4280.918] (II) libinput: ZSA Technology Labs Moonlander Mark I: Step value 0 was provided, libinput Fallback acceleration function is used.
[  4280.918] (II) libinput: ZSA Technology Labs Moonlander Mark I: Step value 0 was provided, libinput Fallback acceleration function is used.
[  4280.918] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:03.0/0000:05:00.0/usb1/1-1/1-1:1.2/0003:3297:1969.0006/input/input7/event5"
[  4280.918] (II) XINPUT: Adding extended input device "ZSA Technology Labs Moonlander Mark I" (type: MOUSE, id 9)
[  4280.918] (**) Option "AccelerationScheme" "none"
[  4280.918] (**) ZSA Technology Labs Moonlander Mark I: (accel) selected scheme none/0
[  4280.918] (**) ZSA Technology Labs Moonlander Mark I: (accel) acceleration factor: 2.000
[  4280.918] (**) ZSA Technology Labs Moonlander Mark I: (accel) acceleration threshold: 4
[  4280.920] (II) event5  - ZSA Technology Labs Moonlander Mark I: is tagged by udev as: Mouse
[  4280.920] (II) event5  - ZSA Technology Labs Moonlander Mark I: device is a pointer
[  4280.921] (II) config/udev: Adding input device ZSA Technology Labs Moonlander Mark I (/dev/input/mouse1)
[  4280.921] (II) No input driver specified, ignoring this device.
[  4280.921] (II) This device may have been added with another device file.
[  4280.922] (II) config/udev: Adding input device ZSA Technology Labs Moonlander Mark I Keyboard (/dev/input/event8)
[  4280.922] (**) ZSA Technology Labs Moonlander Mark I Keyboard: Applying InputClass "libinput keyboard catchall"
[  4280.922] (**) ZSA Technology Labs Moonlander Mark I Keyboard: Applying InputClass "system-keyboard"
[  4280.922] (II) Using input driver 'libinput' for 'ZSA Technology Labs Moonlander Mark I Keyboard'
[  4280.923] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 45 paused 0
[  4280.923] (**) ZSA Technology Labs Moonlander Mark I Keyboard: always reports core events
[  4280.923] (**) Option "Device" "/dev/input/event8"
[  4280.924] (II) event8  - ZSA Technology Labs Moonlander Mark I Keyboard: is tagged by udev as: Keyboard
[  4280.924] (II) event8  - ZSA Technology Labs Moonlander Mark I Keyboard: device is a keyboard
[  4280.924] (II) event8  - ZSA Technology Labs Moonlander Mark I Keyboard: device removed
[  4280.924] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:03.0/0000:05:00.0/usb1/1-1/1-1:1.3/0003:3297:1969.0007/input/input10/event8"
[  4280.924] (II) XINPUT: Adding extended input device "ZSA Technology Labs Moonlander Mark I Keyboard" (type: KEYBOARD, id 10)
[  4280.924] (**) Option "xkb_layout" "fr"
[  4280.926] (II) event8  - ZSA Technology Labs Moonlander Mark I Keyboard: is tagged by udev as: Keyboard
[  4280.926] (II) event8  - ZSA Technology Labs Moonlander Mark I Keyboard: device is a keyboard
[  4280.927] (II) config/udev: Adding input device ZSA Technology Labs Moonlander Mark I System Control (/dev/input/event6)
[  4280.927] (**) ZSA Technology Labs Moonlander Mark I System Control: Applying InputClass "libinput keyboard catchall"
[  4280.927] (**) ZSA Technology Labs Moonlander Mark I System Control: Applying InputClass "system-keyboard"
[  4280.927] (II) Using input driver 'libinput' for 'ZSA Technology Labs Moonlander Mark I System Control'
[  4280.927] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 46 paused 0
[  4280.927] (**) ZSA Technology Labs Moonlander Mark I System Control: always reports core events
[  4280.927] (**) Option "Device" "/dev/input/event6"
[  4280.929] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: is tagged by udev as: Keyboard Joystick
[  4280.929] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: device is a keyboard
[  4280.929] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: device removed
[  4280.929] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:03.0/0000:05:00.0/usb1/1-1/1-1:1.3/0003:3297:1969.0007/input/input8/event6"
[  4280.929] (II) XINPUT: Adding extended input device "ZSA Technology Labs Moonlander Mark I System Control" (type: KEYBOARD, id 11)
[  4280.929] (**) Option "xkb_layout" "fr"
[  4280.930] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: is tagged by udev as: Keyboard Joystick
[  4280.930] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: device is a keyboard
[  4280.931] (II) config/udev: Adding input device ZSA Technology Labs Moonlander Mark I Consumer Control (/dev/input/event7)
[  4280.931] (**) ZSA Technology Labs Moonlander Mark I Consumer Control: Applying InputClass "libinput keyboard catchall"
[  4280.931] (**) ZSA Technology Labs Moonlander Mark I Consumer Control: Applying InputClass "system-keyboard"
[  4280.931] (II) Using input driver 'libinput' for 'ZSA Technology Labs Moonlander Mark I Consumer Control'
[  4280.932] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 47 paused 0
[  4280.932] (**) ZSA Technology Labs Moonlander Mark I Consumer Control: always reports core events
[  4280.932] (**) Option "Device" "/dev/input/event7"
[  4280.933] (II) event7  - ZSA Technology Labs Moonlander Mark I Consumer Control: is tagged by udev as: Keyboard
[  4280.933] (II) event7  - ZSA Technology Labs Moonlander Mark I Consumer Control: device is a keyboard
[  4280.933] (II) event7  - ZSA Technology Labs Moonlander Mark I Consumer Control: device removed
[  4280.933] (II) libinput: ZSA Technology Labs Moonlander Mark I Consumer Control: needs a virtual subdevice
[  4280.933] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:03.0/0000:05:00.0/usb1/1-1/1-1:1.3/0003:3297:1969.0007/input/input9/event7"
[  4280.934] (II) XINPUT: Adding extended input device "ZSA Technology Labs Moonlander Mark I Consumer Control" (type: MOUSE, id 12)
[  4280.934] (**) Option "AccelerationScheme" "none"
[  4280.934] (**) ZSA Technology Labs Moonlander Mark I Consumer Control: (accel) selected scheme none/0
[  4280.934] (**) ZSA Technology Labs Moonlander Mark I Consumer Control: (accel) acceleration factor: 2.000
[  4280.934] (**) ZSA Technology Labs Moonlander Mark I Consumer Control: (accel) acceleration threshold: 4
[  4280.935] (II) event7  - ZSA Technology Labs Moonlander Mark I Consumer Control: is tagged by udev as: Keyboard
[  4280.935] (II) event7  - ZSA Technology Labs Moonlander Mark I Consumer Control: device is a keyboard
[  4280.936] (II) config/udev: Adding input device Logitech G500s Laser Gaming Mouse (/dev/input/event2)
[  4280.936] (**) Logitech G500s Laser Gaming Mouse: Applying InputClass "libinput pointer catchall"
[  4280.936] (II) Using input driver 'libinput' for 'Logitech G500s Laser Gaming Mouse'
[  4280.988] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 48 paused 0
[  4280.988] (**) Logitech G500s Laser Gaming Mouse: always reports core events
[  4280.988] (**) Option "Device" "/dev/input/event2"
[  4280.989] (II) event2  - Logitech G500s Laser Gaming Mouse: is tagged by udev as: Mouse
[  4280.989] (II) event2  - Logitech G500s Laser Gaming Mouse: device set to 800 DPI
[  4280.990] (II) event2  - Logitech G500s Laser Gaming Mouse: device is a pointer
[  4280.990] (II) event2  - Logitech G500s Laser Gaming Mouse: device removed
[  4280.990] (II) libinput: Logitech G500s Laser Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[  4280.990] (II) libinput: Logitech G500s Laser Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[  4280.990] (II) libinput: Logitech G500s Laser Gaming Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[  4280.990] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:08:00.1/usb3/3-5/3-5:1.0/0003:046D:C24E.0002/input/input2/event2"
[  4280.990] (II) XINPUT: Adding extended input device "Logitech G500s Laser Gaming Mouse" (type: MOUSE, id 13)
[  4280.990] (**) Option "AccelerationScheme" "none"
[  4280.990] (**) Logitech G500s Laser Gaming Mouse: (accel) selected scheme none/0
[  4280.990] (**) Logitech G500s Laser Gaming Mouse: (accel) acceleration factor: 2.000
[  4280.990] (**) Logitech G500s Laser Gaming Mouse: (accel) acceleration threshold: 4
[  4280.991] (II) event2  - Logitech G500s Laser Gaming Mouse: is tagged by udev as: Mouse
[  4280.991] (II) event2  - Logitech G500s Laser Gaming Mouse: device set to 800 DPI
[  4280.991] (II) event2  - Logitech G500s Laser Gaming Mouse: device is a pointer
[  4280.993] (II) config/udev: Adding input device Logitech G500s Laser Gaming Mouse (/dev/input/mouse0)
[  4280.993] (II) No input driver specified, ignoring this device.
[  4280.993] (II) This device may have been added with another device file.
[  4280.994] (II) config/udev: Adding input device Logitech G500s Laser Gaming Mouse Keyboard (/dev/input/event4)
[  4280.994] (**) Logitech G500s Laser Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[  4280.994] (**) Logitech G500s Laser Gaming Mouse Keyboard: Applying InputClass "system-keyboard"
[  4280.994] (II) Using input driver 'libinput' for 'Logitech G500s Laser Gaming Mouse Keyboard'
[  4280.994] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 49 paused 0
[  4280.994] (**) Logitech G500s Laser Gaming Mouse Keyboard: always reports core events
[  4280.994] (**) Option "Device" "/dev/input/event4"
[  4280.996] (II) event4  - Logitech G500s Laser Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[  4280.996] (II) event4  - Logitech G500s Laser Gaming Mouse Keyboard: device is a keyboard
[  4280.996] (II) event4  - Logitech G500s Laser Gaming Mouse Keyboard: device removed
[  4280.996] (II) libinput: Logitech G500s Laser Gaming Mouse Keyboard: needs a virtual subdevice
[  4280.996] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:08:00.1/usb3/3-5/3-5:1.1/0003:046D:C24E.0004/input/input4/event4"
[  4280.996] (II) XINPUT: Adding extended input device "Logitech G500s Laser Gaming Mouse Keyboard" (type: MOUSE, id 14)
[  4280.996] (**) Option "AccelerationScheme" "none"
[  4280.996] (**) Logitech G500s Laser Gaming Mouse Keyboard: (accel) selected scheme none/0
[  4280.996] (**) Logitech G500s Laser Gaming Mouse Keyboard: (accel) acceleration factor: 2.000
[  4280.996] (**) Logitech G500s Laser Gaming Mouse Keyboard: (accel) acceleration threshold: 4
[  4280.997] (II) event4  - Logitech G500s Laser Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[  4280.997] (II) event4  - Logitech G500s Laser Gaming Mouse Keyboard: device is a keyboard
[  4280.998] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10)
[  4280.998] (II) No input driver specified, ignoring this device.
[  4280.998] (II) This device may have been added with another device file.
[  4280.999] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[  4280.999] (II) No input driver specified, ignoring this device.
[  4280.999] (II) This device may have been added with another device file.
[  4280.999] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[  4280.999] (II) No input driver specified, ignoring this device.
[  4280.999] (II) This device may have been added with another device file.
[  4281.000] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[  4281.000] (II) No input driver specified, ignoring this device.
[  4281.000] (II) This device may have been added with another device file.
[  4281.000] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event14)
[  4281.000] (II) No input driver specified, ignoring this device.
[  4281.000] (II) This device may have been added with another device file.
[  4281.001] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event15)
[  4281.001] (II) No input driver specified, ignoring this device.
[  4281.001] (II) This device may have been added with another device file.
[  4281.001] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event16)
[  4281.001] (II) No input driver specified, ignoring this device.
[  4281.001] (II) This device may have been added with another device file.
[  4281.002] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event17)
[  4281.002] (II) No input driver specified, ignoring this device.
[  4281.002] (II) This device may have been added with another device file.
[  4281.002] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event18)
[  4281.002] (II) No input driver specified, ignoring this device.
[  4281.002] (II) This device may have been added with another device file.
[  4281.002] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event19)
[  4281.002] (II) No input driver specified, ignoring this device.
[  4281.002] (II) This device may have been added with another device file.
[  4281.003] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event20)
[  4281.003] (II) No input driver specified, ignoring this device.
[  4281.003] (II) This device may have been added with another device file.
[  4281.003] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[  4281.003] (II) No input driver specified, ignoring this device.
[  4281.003] (II) This device may have been added with another device file.
[  4281.010] (**) ZSA Technology Labs Moonlander Mark I Consumer Control: Applying InputClass "libinput keyboard catchall"
[  4281.010] (**) ZSA Technology Labs Moonlander Mark I Consumer Control: Applying InputClass "system-keyboard"
[  4281.010] (II) Using input driver 'libinput' for 'ZSA Technology Labs Moonlander Mark I Consumer Control'
[  4281.010] (II) systemd-logind: returning pre-existing fd for /dev/input/event7 13:71
[  4281.010] (**) ZSA Technology Labs Moonlander Mark I Consumer Control: always reports core events
[  4281.010] (**) Option "Device" "/dev/input/event7"
[  4281.010] (II) libinput: ZSA Technology Labs Moonlander Mark I Consumer Control: is a virtual subdevice
[  4281.010] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:03.0/0000:05:00.0/usb1/1-1/1-1:1.3/0003:3297:1969.0007/input/input9/event7"
[  4281.010] (II) XINPUT: Adding extended input device "ZSA Technology Labs Moonlander Mark I Consumer Control" (type: KEYBOARD, id 15)
[  4281.010] (**) Option "xkb_layout" "fr"
[  4281.010] (**) Logitech G500s Laser Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[  4281.010] (**) Logitech G500s Laser Gaming Mouse Keyboard: Applying InputClass "system-keyboard"
[  4281.010] (II) Using input driver 'libinput' for 'Logitech G500s Laser Gaming Mouse Keyboard'
[  4281.010] (II) systemd-logind: returning pre-existing fd for /dev/input/event4 13:68
[  4281.010] (**) Logitech G500s Laser Gaming Mouse Keyboard: always reports core events
[  4281.010] (**) Option "Device" "/dev/input/event4"
[  4281.010] (II) libinput: Logitech G500s Laser Gaming Mouse Keyboard: is a virtual subdevice
[  4281.010] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:08:00.1/usb3/3-5/3-5:1.1/0003:046D:C24E.0004/input/input4/event4"
[  4281.010] (II) XINPUT: Adding extended input device "Logitech G500s Laser Gaming Mouse Keyboard" (type: KEYBOARD, id 16)
[  4281.010] (**) Option "xkb_layout" "fr"
[  4282.983] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  4282.983] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  4282.983] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[  4282.983] (--) NVIDIA(GPU-0): 
[  4282.983] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  4282.983] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[  4282.983] (--) NVIDIA(GPU-0): DFP-1: 2670.0 MHz maximum pixel clock
[  4282.983] (--) NVIDIA(GPU-0): 
[  4282.984] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  4282.984] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[  4282.984] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[  4282.984] (--) NVIDIA(GPU-0): 
[  4282.984] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  4282.984] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[  4282.984] (--) NVIDIA(GPU-0): DFP-3: 2670.0 MHz maximum pixel clock
[  4282.984] (--) NVIDIA(GPU-0): 
[  4283.080] (--) NVIDIA(GPU-0): Idek Iiyama PL2409HD (DFP-4): connected
[  4283.080] (--) NVIDIA(GPU-0): Idek Iiyama PL2409HD (DFP-4): Internal TMDS
[  4283.080] (--) NVIDIA(GPU-0): Idek Iiyama PL2409HD (DFP-4): 340.0 MHz maximum pixel clock
[  4283.080] (--) NVIDIA(GPU-0): 
[  4283.080] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  4283.080] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[  4283.080] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[  4283.080] (--) NVIDIA(GPU-0): 
[  4283.083] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  4283.083] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[  4283.083] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[  4283.083] (--) NVIDIA(GPU-0): 
[  4283.459] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  4283.459] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  4283.459] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[  4283.459] (--) NVIDIA(GPU-0): 
[  4283.459] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  4283.459] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[  4283.459] (--) NVIDIA(GPU-0): DFP-1: 2670.0 MHz maximum pixel clock
[  4283.459] (--) NVIDIA(GPU-0): 
[  4283.459] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  4283.459] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[  4283.459] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[  4283.459] (--) NVIDIA(GPU-0): 
[  4283.459] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  4283.459] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[  4283.459] (--) NVIDIA(GPU-0): DFP-3: 2670.0 MHz maximum pixel clock
[  4283.459] (--) NVIDIA(GPU-0): 
[  4283.556] (--) NVIDIA(GPU-0): Idek Iiyama PL2409HD (DFP-4): connected
[  4283.556] (--) NVIDIA(GPU-0): Idek Iiyama PL2409HD (DFP-4): Internal TMDS
[  4283.556] (--) NVIDIA(GPU-0): Idek Iiyama PL2409HD (DFP-4): 340.0 MHz maximum pixel clock
[  4283.556] (--) NVIDIA(GPU-0): 
[  4283.556] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  4283.556] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[  4283.556] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock
[  4283.556] (--) NVIDIA(GPU-0): 
[  4283.559] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  4283.559] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS
[  4283.559] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock
[  4283.559] (--) NVIDIA(GPU-0):

Any ideas, hints, etc?

Last edited by ElricleNecro (2025-12-11 17:33:36)

Offline

#2 2025-12-09 15:36:08

twelveeighty
Member
Registered: 2011-09-04
Posts: 1,427

Re: [SOLVED] Black screen after resuming from suspend

I don't have NVIDIA, but it sounds similar to:

https://bbs.archlinux.org/viewtopic.php?id=310602

Offline

#3 2025-12-09 16:28:28

ElricleNecro
Member
Registered: 2015-10-11
Posts: 10

Re: [SOLVED] Black screen after resuming from suspend

I don't think this is the same problem. In this case, I think I should also have the problem on wayland.

To be on the safe side, I've tested with the kernel parameter given in the thread to deactivate IOMMU, but no change.

Edit:

I thought it may be linked to https://github.com/NVIDIA/open-gpu-kern … issues/472
But setting nvidia.NVreg_PreserveVideoMemoryAllocations=0 in the kernel parameters does not solve the issue.

I also tried removing all xorg file nvidia may have created in /etc/X11, didn't help. Recreating them with nvidia-xconfig neither. Currently, the only xorg config I have contains:

# Written by systemd-localed(8), read by systemd-localed and Xorg. It's
# probably wise not to edit this file manually. Use localectl(1) to
# update this file.
Section "InputClass"
        Identifier "system-keyboard"
        MatchIsKeyboard "on"
        Option "XkbLayout" "fr"
EndSection

I don't think it should cause problems.

Last edited by ElricleNecro (2025-12-09 16:52:08)

Offline

#4 2025-12-10 21:40:39

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,702

Re: [SOLVED] Black screen after resuming from suspend

"options nvidia-drm modeset=1 fbdev=1" is the default since some 560 or 570 driver anyway.

acpi_os=Linux

acpi_osi=! acpi_osi="Windows 2015"

https://learn.microsoft.com/en-us/windo … inacpi-osi

My main idea was a problem linked to Nvidia

Possibly…

[ 4272.503680] kitty[4176]: segfault at c8 ip 00007fb1d2a39e77 sp 00007ffe147a8670 error 4 in libnvidia-glcore.so.580.105.08[a39e77,7fb1d2400000+c00000] likely on CPU 8 (core 0, socket 0)
[ 4272.503690] Code: 64 48 8b 00 48 85 c0 74 95 83 b8 08 01 00 00 13 77 8c 80 b8 50 aa 09 00 00 74 83 e9 03 b2 87 ff 0f 1f 00 48 8b 85 e0 01 00 00 <80> b8 c8 00 00 00 00 0f 89 d7 fd ff ff 4c 8d 74 24 20 31 f6 48 89

But setting nvidia.NVreg_PreserveVideoMemoryAllocations=0 in the kernel parameters does not solve the issue.

Did you also disable the services?
https://wiki.archlinux.org/title/NVIDIA … er_suspend

Fwwi, https://bbs.archlinux.org/viewtopic.php?id=310125
There've been a bunch of threads where the framebuffer switch fails because of some attached input devices.

Do you have access to a $5 wired mouse and keyboard from office supply?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2025-12-10 22:55:26

ElricleNecro
Member
Registered: 2015-10-11
Posts: 10

Re: [SOLVED] Black screen after resuming from suspend

seth wrote:

"options nvidia-drm modeset=1 fbdev=1" is the default since some 560 or 570 driver anyway.

acpi_os=Linux

acpi_osi=! acpi_osi="Windows 2015"

https://learn.microsoft.com/en-us/windo … inacpi-osi

I saw that, tried it, but couldn't get the kernel to start. I'll retry. I don't understand either what this means.

seth wrote:

My main idea was a problem linked to Nvidia

Possibly…

[ 4272.503680] kitty[4176]: segfault at c8 ip 00007fb1d2a39e77 sp 00007ffe147a8670 error 4 in libnvidia-glcore.so.580.105.08[a39e77,7fb1d2400000+c00000] likely on CPU 8 (core 0, socket 0)
[ 4272.503690] Code: 64 48 8b 00 48 85 c0 74 95 83 b8 08 01 00 00 13 77 8c 80 b8 50 aa 09 00 00 74 83 e9 03 b2 87 ff 0f 1f 00 48 8b 85 e0 01 00 00 <80> b8 c8 00 00 00 00 0f 89 d7 fd ff ff 4c 8d 74 24 20 31 f6 48 89

I killed awesome, this is probably the why of this segfault (I could connect through SSH to the computer, thats how I realised it was an Xorg problem and not a system freeze, but apparently I failed to report that in the opening post).

seth wrote:

But setting nvidia.NVreg_PreserveVideoMemoryAllocations=0 in the kernel parameters does not solve the issue.

Did you also disable the services?
https://wiki.archlinux.org/title/NVIDIA … er_suspend

Hmmm, I think so, but to be on the safe side, I'll retry that too.

seth wrote:

Fwwi, https://bbs.archlinux.org/viewtopic.php?id=310125
There've been a bunch of threads where the framebuffer switch fails because of some attached input devices.

Do you have access to a $5 wired mouse and keyboard from office supply?

I was not aware of that. I don't have a cheap keyboard, but I do still have my old Corsair.

Offline

#6 2025-12-10 23:18:00

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,702

Re: [SOLVED] Black screen after resuming from suspend

I was not aware of that. I don't have a cheap keyboard, but I do still have my old Corsair.

https://bbs.archlinux.org/viewtopic.php?id=309989
Compare the subject line lol

Edit: and look

[  4280.929] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: is tagged by udev as: Keyboard Joystick
[  4280.930] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: is tagged by udev as: Keyboard Joystick

It's your fancy keyboard (googled it wink)

Last edited by seth (2025-12-10 23:20:21)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2025-12-11 08:54:48

ElricleNecro
Member
Registered: 2015-10-11
Posts: 10

Re: [SOLVED] Black screen after resuming from suspend

seth wrote:

I was not aware of that. I don't have a cheap keyboard, but I do still have my old Corsair.

https://bbs.archlinux.org/viewtopic.php?id=309989
Compare the subject line lol

Edit: and look

[  4280.929] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: is tagged by udev as: Keyboard Joystick
[  4280.930] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: is tagged by udev as: Keyboard Joystick

It's your fancy keyboard (googled it wink)

I tried to switch to a TTY and back with and without the keyboard, and it confirm this seems to be the problem, thanks!

As to solve it, following the threads, I did:

# udevadm info /sys/class/input/*
...
E: ID_BUS=usb
E: ID_MODEL=Moonlander_Mark_I
E: ID_MODEL_ENC=Moonlander\x20Mark\x20I
E: ID_MODEL_ID=1969
E: ID_SERIAL=ZSA_Technology_Labs_Moonlander_Mark_I
E: ID_VENDOR=ZSA_Technology_Labs
E: ID_VENDOR_ENC=ZSA\x20Technology\x20Labs
E: ID_VENDOR_ID=3297
E: ID_REVISION=0001
...

and created

# cat /etc/udev/hwdb.d/70-keyboard.hwdb                              
id-input-modalias:input:*v3297p1969*
  ID_INPUT_JOYSTICK=

and tried both reloading with the command and rebooting the computer.
But I still have the issue, and I'm still seeing:

...
[    33.421] (**) ZSA Technology Labs Moonlander Mark I System Control: always reports core events
[    33.421] (**) Option "Device" "/dev/input/event6"
[    33.422] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: is tagged by udev as: Keyboard Joystick
[    33.422] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: device is a keyboard
[    33.422] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: device removed
[    33.422] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:03.0/0000:05:00.0/usb1/1-1/1-1:1.3/0003:3297:1969.0007/input/input8/event6"
[    33.422] (II) XINPUT: Adding extended input device "ZSA Technology Labs Moonlander Mark I System Control" (type: KEYBOARD, id 11)
[    33.422] (**) Option "xkb_layout" "fr"
[    33.424] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: is tagged by udev as: Keyboard Joystick
[    33.424] (II) event6  - ZSA Technology Labs Moonlander Mark I System Control: device is a keyboard
...

in Xorg logs, and udev still report:

# udevadm info /sys/class/input/*
...
E: DEVPATH=/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:03.0/0000:05:00.0/usb1/1-1/1-1:1.3/0003:3297:1969.0007/input/input8/ev>
E: DEVNAME=/dev/input/event6
E: MAJOR=13
E: MINOR=70
E: SUBSYSTEM=input
E: USEC_INITIALIZED=2397321
E: ID_INPUT=1
E: ID_INPUT_JOYSTICK=1
E: ID_INPUT_KEY=1
E: ID_BUS=usb
E: ID_MODEL=Moonlander_Mark_I
E: ID_MODEL_ENC=Moonlander\x20Mark\x20I
E: ID_MODEL_ID=1969
E: ID_SERIAL=ZSA_Technology_Labs_Moonlander_Mark_I
E: ID_VENDOR=ZSA_Technology_Labs
E: ID_VENDOR_ENC=ZSA\x20Technology\x20Labs
E: ID_VENDOR_ID=3297
E: ID_REVISION=0001
...

Did I missed something in the thread?

Also, I noticed the keyboard was also reporting as a mouse, so I also created:

# cat /etc/udev/hwdb.d/71-mouse.hwdb   
id-input-modalias:input:*v3297p1969*
  ID_INPUT_MOUSE=

But it seems all those files/rules are ignored.

Offline

#8 2025-12-11 10:01:13

Virus1x
Member
Registered: 2025-12-03
Posts: 11

Re: [SOLVED] Black screen after resuming from suspend

Hey, if you're having that old Nvidia X11 suspend issue, try turning off fbdev=1 but keep modeset=1 on. Or, you could just switch to Wayland—that usually makes things wake up smoothly.

Offline

#9 2025-12-11 16:24:10

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,702

Re: [SOLVED] Black screen after resuming from suspend

@Virus1x, we've already isolated the keyboard as problem, specifically it showing up as joystick.
@ElricleNecro

stat /etc/udev/hwdb.d/70-keyboard.hwdb

and try 

evdev:input:*v3297p1969*

That'd be the common pattern, there's no id-input-modalias anywhere in /usr/lib/udev/hwdb.d/ so I'm not sure the suggestion there is actually correct (sorry, didn't closely read the post before sharing it)

The mouse device status is probably ok.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#10 2025-12-11 17:02:36

ElricleNecro
Member
Registered: 2015-10-11
Posts: 10

Re: [SOLVED] Black screen after resuming from suspend

seth wrote:

@Virus1x, we've already isolated the keyboard as problem, specifically it showing up as joystick.
@ElricleNecro

stat /etc/udev/hwdb.d/70-keyboard.hwdb

and try 

evdev:input:*v3297p1969*

That'd be the common pattern, there's no id-input-modalias anywhere in /usr/lib/udev/hwdb.d/ so I'm not sure the suggestion there is actually correct (sorry, didn't closely read the post before sharing it)

The mouse device status is probably ok.

I applied your correction, the file seems to be used after the update (`systemd-hwdb update -s`), but it didn't fix it. And after a reboot, I'm still seeing (and the problem still being there) :

...
[   210.520] (**) Option "Device" "/dev/input/event4"
[   210.522] (II) event4  - ZSA Technology Labs Moonlander Mark I System Control: is tagged by udev as: Keyboard Joystick
[   210.522] (II) event4  - ZSA Technology Labs Moonlander Mark I System Control: device is a keyboard
[   210.522] (II) event4  - ZSA Technology Labs Moonlander Mark I System Control: device removed
[   210.522] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:03.0/0000:05:00.0/usb1/1-1/1-1:1.3/0003:3297:1969.0005/input/input4/event4"
[   210.522] (II) XINPUT: Adding extended input device "ZSA Technology Labs Moonlander Mark I System Control" (type: KEYBOARD, id 10)
[   210.522] (**) Option "xkb_layout" "fr"
[   210.523] (II) event4  - ZSA Technology Labs Moonlander Mark I System Control: is tagged by udev as: Keyboard Joystick
[   210.523] (II) event4  - ZSA Technology Labs Moonlander Mark I System Control: device is a keyboard
...

and `udevadm info` still show `ID_INPUT_JOYSTICK=1`. So the content is clearly ignored, or something does not match the keyboard in the rule.

# stat /etc/udev/hwdb.d/70-keyboard.hwdb
  Fichier : /etc/udev/hwdb.d/70-keyboard.hwdb
   Taille : 46        	Blocs : 8          Blocs d'E/S : 4096   fichier régulier
Périphérique : 259/5	Inœud : 3539859     Liens : 1
Accès : (0644/-rw-r--r--)  UID : (    0/    root)   GID : (    0/    root)
 Accès : 2025-12-11 17:44:12.991876737 +0100
Modif. : 2025-12-11 17:44:01.976674338 +0100
Changt : 2025-12-11 17:44:01.980674411 +0100
  Créé : 2025-12-11 17:44:01.976674338 +0100
# cat /etc/udev/hwdb.d/70-keyboard.hwdb
evdev:input:*v3297p1969*
  ID_INPUT_JOYSTICK=

(FYI: running systemd-hwdb does update the access time of the file, but a reboot does not, maybe that could be a hint)

Maybe there is a way to test what udev rules are applied.

Offline

#11 2025-12-11 17:19:05

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,702

Re: [SOLVED] Black screen after resuming from suspend

Compared /usr/lib/udev/hwdb.d/60-input-id.hwdb
It's actually

id-input:modalias:input:*v3297p1969*

(nb. the colon before "modalias" instead of the dash)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#12 2025-12-11 17:32:42

ElricleNecro
Member
Registered: 2015-10-11
Posts: 10

Re: [SOLVED] Black screen after resuming from suspend

seth wrote:

Compared /usr/lib/udev/hwdb.d/60-input-id.hwdb
It's actually

id-input:modalias:input:*v3297p1969*

(nb. the colon before "modalias" instead of the dash)

It worked !!!!!!!
THANK YOU !!!!


I'm curious about why it started to act like this during summer, but it works, it is the most important !

To resume: it was the keyboard that, for an unknown reason, started to badly interact with Xorg when resuming from suspend. To fix it, we need to create a udev file looking like :

cat /etc/udev/hwdb.d/70-keyboard.hwdb
id-input:modalias:input:*v3297p1969*
  ID_INPUT_JOYSTICK=

where `v3297` must be replace (for other devices) by `v${VENDOR_ID}` and `p1969` by `p${PRODUCT_ID}`.
Then run

systemd-hwdb update -s

to ask udev to update its rules.

Offline

Pages: 1

Board footer

Powered by FluxBB