You are not logged in.

Pages: 1

#1 2025-12-13 14:37:49

TeaMaster
Member
Registered: 2024-06-30
Posts: 18

[SOLVED] Can't startx after an update

I'm using i3 on X11 with a ryzen integrated gpu + nvidia dedicated gpu (nvidia-open-lts) + linux-lts kernel.

I've just updated today and I get greeted with the tty when turning my laptop on.

Also, paru crashes with a message that it lacks libalpm.so.15.

Here are my xorg logs:

[   676.330] 
X.Org X Server 1.21.1.21
X Protocol Version 11, Revision 0
[   676.330] Current Operating System: Linux victus-archlinux 6.12.61-1-lts #1 SMP PREEMPT_DYNAMIC Sun, 07 Dec 2025 09:50:46 +0000 x86_64
[   676.330] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=72df0550-9f93-4d15-92bf-d66e14a6995b rw cryptdevice=UUID=74623756-d34e-46df-9cad-98e91c01d37a:root zswap.enabled=0 rootfstype=ext4 loglevel=3 quiet
[   676.330]  
[   676.330] Current version of pixman: 0.46.4
[   676.330] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   676.330] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   676.330] (==) Log file: "/home/wojtek/.local/share/xorg/Xorg.0.log", Time: Sat Dec 13 15:28:38 2025
[   676.331] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   676.331] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   676.331] (==) No Layout section.  Using the first Screen section.
[   676.331] (==) No screen section available. Using defaults.
[   676.331] (**) |-->Screen "Default Screen Section" (0)
[   676.331] (**) |   |-->Monitor "<default monitor>"
[   676.331] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   676.331] (**) Allowing byte-swapped clients
[   676.331] (==) Automatically adding devices
[   676.331] (==) Automatically enabling devices
[   676.331] (==) Automatically adding GPU devices
[   676.331] (==) Automatically binding GPU devices
[   676.331] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   676.331] (WW) The directory "/usr/share/fonts/misc" does not exist.
[   676.331] 	Entry deleted from font path.
[   676.331] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[   676.331] 	Entry deleted from font path.
[   676.331] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[   676.331] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   676.331] 	Entry deleted from font path.
[   676.331] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   676.331] 	Entry deleted from font path.
[   676.331] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[   676.331] 	Entry deleted from font path.
[   676.331] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[   676.331] 	Entry deleted from font path.
[   676.331] (==) FontPath set to:
	
[   676.331] (==) ModulePath set to "/usr/lib/xorg/modules"
[   676.331] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   676.331] (II) Module ABI versions:
[   676.331] 	X.Org ANSI C Emulation: 0.4
[   676.331] 	X.Org Video Driver: 25.2
[   676.331] 	X.Org XInput driver : 24.4
[   676.331] 	X.Org Server Extension : 10.0
[   676.331] (++) using VT number 1

[   676.332] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[   676.333] (II) xfree86: Adding drm device (/dev/dri/card0)
[   676.333] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.1/0000:01:00.0/drm/card0
[   676.334] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[   676.334] (II) xfree86: Adding drm device (/dev/dri/card1)
[   676.334] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:07:00.0/drm/card1
[   676.334] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 14 paused 0
[   676.336] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[   676.338] (--) PCI: (1@0:0:0) 10de:2520:103c:88ee rev 161, Mem @ 0xfb000000/16777216, 0x7c00000000/8589934592, 0x7e00000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
[   676.338] (--) PCI:*(7@0:0:0) 1002:1638:103c:88ee rev 197, Mem @ 0xd0000000/268435456, 0xe0000000/2097152, 0xfc500000/524288, I/O @ 0x0000c000/256
[   676.338] (II) LoadModule: "glx"
[   676.338] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   676.339] (II) Module glx: vendor="X.Org Foundation"
[   676.339] 	compiled for 1.21.1.21, module version = 1.0.0
[   676.339] 	ABI class: X.Org Server Extension, version 10.0
[   676.339] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[   676.339] 	loading driver: nvidia
[   676.339] (==) Matched ati as autoconfigured driver 0
[   676.339] (==) Matched nvidia as autoconfigured driver 1
[   676.339] (==) Matched nouveau as autoconfigured driver 2
[   676.339] (==) Matched nv as autoconfigured driver 3
[   676.339] (==) Matched modesetting as autoconfigured driver 4
[   676.339] (==) Matched fbdev as autoconfigured driver 5
[   676.339] (==) Matched vesa as autoconfigured driver 6
[   676.339] (==) Assigned the driver to the xf86ConfigLayout
[   676.339] (II) LoadModule: "ati"
[   676.339] (WW) Warning, couldn't open module ati
[   676.339] (EE) Failed to load module "ati" (module does not exist, 0)
[   676.339] (II) LoadModule: "nvidia"
[   676.339] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   676.339] (II) Module nvidia: vendor="NVIDIA Corporation"
[   676.339] 	compiled for 1.6.99.901, module version = 1.0.0
[   676.339] 	Module class: X.Org Video Driver
[   676.339] (II) LoadModule: "nouveau"
[   676.340] (WW) Warning, couldn't open module nouveau
[   676.340] (EE) Failed to load module "nouveau" (module does not exist, 0)
[   676.340] (II) LoadModule: "nv"
[   676.340] (WW) Warning, couldn't open module nv
[   676.340] (EE) Failed to load module "nv" (module does not exist, 0)
[   676.340] (II) LoadModule: "modesetting"
[   676.340] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   676.340] (II) Module modesetting: vendor="X.Org Foundation"
[   676.340] 	compiled for 1.21.1.21, module version = 1.21.1
[   676.340] 	Module class: X.Org Video Driver
[   676.340] 	ABI class: X.Org Video Driver, version 25.2
[   676.340] (II) LoadModule: "fbdev"
[   676.340] (WW) Warning, couldn't open module fbdev
[   676.340] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   676.340] (II) LoadModule: "vesa"
[   676.340] (WW) Warning, couldn't open module vesa
[   676.340] (EE) Failed to load module "vesa" (module does not exist, 0)
[   676.340] (II) NVIDIA dlloader X Driver  580.105.08  Wed Oct 29 22:16:45 UTC 2025
[   676.340] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   676.340] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   676.340] (II) modeset(0): using drv /dev/dri/card1
[   676.340] (II) systemd-logind: releasing fd for 226:0
[   676.341] (II) Loading sub module "fb"
[   676.341] (II) LoadModule: "fb"
[   676.341] (II) Module "fb" already built-in
[   676.341] (II) Loading sub module "wfb"
[   676.341] (II) LoadModule: "wfb"
[   676.341] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   676.341] (II) Module wfb: vendor="X.Org Foundation"
[   676.341] 	compiled for 1.21.1.21, module version = 1.0.0
[   676.341] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   676.341] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   676.341] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   676.341] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   676.341] (==) modeset(0): RGB weight 888
[   676.341] (==) modeset(0): Default visual is TrueColor
[   676.341] (II) Loading sub module "glamoregl"
[   676.341] (II) LoadModule: "glamoregl"
[   676.341] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   676.343] (II) Module glamoregl: vendor="X.Org Foundation"
[   676.343] 	compiled for 1.21.1.21, module version = 1.0.1
[   676.343] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   676.381] (II) modeset(0): glamor: Using OpenGL 4.6 context.
[   676.381] (II) modeset(0): glamor X acceleration enabled on AMD Radeon Graphics (radeonsi, renoir, ACO, DRM 3.61, 6.12.61-1-lts)
[   676.381] (II) modeset(0): glamor initialized
[   676.381] (==) modeset(0): VariableRefresh: disabled
[   676.381] (==) modeset(0): AsyncFlipSecondaries: disabled
[   676.382] (II) modeset(0): Output eDP-1 has no monitor section
[   676.382] (II) modeset(0): Output DP-1 has no monitor section
[   676.383] (II) modeset(0): EDID for output eDP-1
[   676.383] (II) modeset(0): Manufacturer: BOE  Model: aad  Serial#: 0
[   676.383] (II) modeset(0): Year: 2021  Week: 34
[   676.383] (II) modeset(0): EDID Version: 1.4
[   676.383] (II) modeset(0): Digital Display Input
[   676.383] (II) modeset(0): 8 bits per channel
[   676.383] (II) modeset(0): Digital interface is DisplayPort
[   676.383] (II) modeset(0): Max Image Size [cm]: horiz.: 36  vert.: 20
[   676.383] (II) modeset(0): Gamma: 2.20
[   676.383] (II) modeset(0): No DPMS capabilities specified
[   676.383] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[   676.383] (II) modeset(0): First detailed timing is preferred mode
[   676.383] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[   676.383] (II) modeset(0): Display is continuous-frequency
[   676.383] (II) modeset(0): redX: 0.590 redY: 0.350   greenX: 0.340 greenY: 0.557
[   676.383] (II) modeset(0): blueX: 0.160 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[   676.383] (II) modeset(0): Manufacturer's mask: 0
[   676.383] (II) modeset(0): Supported detailed timing:
[   676.383] (II) modeset(0): clock: 367.5 MHz   Image Size:  355 x 200 mm
[   676.383] (II) modeset(0): h_active: 1920  h_sync: 2028  h_sync_end 2076 h_blank_end 2200 h_border: 0
[   676.383] (II) modeset(0): v_active: 1080  v_sync: 1090  v_sync_end 1100 v_blanking: 1160 v_border: 0
[   676.383] (II) modeset(0): Supported detailed timing:
[   676.383] (II) modeset(0): clock: 153.2 MHz   Image Size:  355 x 200 mm
[   676.383] (II) modeset(0): h_active: 1920  h_sync: 2028  h_sync_end 2076 h_blank_end 2200 h_border: 0
[   676.383] (II) modeset(0): v_active: 1080  v_sync: 1090  v_sync_end 1100 v_blanking: 1160 v_border: 0
[   676.383] (II) modeset(0): Unknown vendor-specific block 2
[   676.383] (II) modeset(0): EDID (in hex):
[   676.383] (II) modeset(0): 	00ffffffffffff0009e5ad0a00000000
[   676.383] (II) modeset(0): 	221f0104a52414780322359759578e29
[   676.383] (II) modeset(0): 	1e505400000001010101010101010101
[   676.383] (II) modeset(0): 	0101010101018e8f8018713850406c30
[   676.383] (II) modeset(0): 	aa0063c81000001ad83b801871385040
[   676.383] (II) modeset(0): 	6c30aa0063c81000001a000000000000
[   676.383] (II) modeset(0): 	00000000000000000000000000000002
[   676.383] (II) modeset(0): 	000b40ff0a3c7d3e162b7d0000000089
[   676.383] (II) modeset(0): Printing probed modes for output eDP-1
[   676.383] (II) modeset(0): Modeline "1920x1080"x144.0  367.50  1920 2028 2076 2200  1080 1090 1100 1160 +hsync -vsync (167.0 kHz eP)
[   676.383] (II) modeset(0): Modeline "1920x1080"x120.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[   676.383] (II) modeset(0): Modeline "1920x1080"x119.9  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[   676.383] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[   676.383] (II) modeset(0): Modeline "1920x1080"x60.0  153.20  1920 2028 2076 2200  1080 1090 1100 1160 +hsync -vsync (69.6 kHz e)
[   676.383] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[   676.383] (II) modeset(0): Modeline "1680x1050"x144.0  367.50  1680 2028 2076 2200  1050 1090 1100 1160 +hsync -vsync (167.0 kHz e)
[   676.383] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[   676.383] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[   676.383] (II) modeset(0): Modeline "1400x1050"x74.8  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[   676.383] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[   676.383] (II) modeset(0): Modeline "1600x900"x120.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[   676.383] (II) modeset(0): Modeline "1600x900"x119.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[   676.383] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[   676.383] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[   676.383] (II) modeset(0): Modeline "1280x1024"x144.0  367.50  1280 2028 2076 2200  1024 1090 1100 1160 +hsync -vsync (167.0 kHz e)
[   676.383] (II) modeset(0): Modeline "1280x1024"x85.0  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync (91.1 kHz d)
[   676.383] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
[   676.383] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[   676.383] (II) modeset(0): Modeline "1440x900"x144.0  367.50  1440 2028 2076 2200  900 1090 1100 1160 +hsync -vsync (167.0 kHz e)
[   676.383] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[   676.383] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[   676.383] (II) modeset(0): Modeline "1280x960"x85.0  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync (85.9 kHz d)
[   676.383] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[   676.383] (II) modeset(0): Modeline "1440x810"x120.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[   676.383] (II) modeset(0): Modeline "1440x810"x119.9  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[   676.383] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[   676.383] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[   676.383] (II) modeset(0): Modeline "1280x800"x144.0  367.50  1280 2028 2076 2200  800 1090 1100 1160 +hsync -vsync (167.0 kHz e)
[   676.383] (II) modeset(0): Modeline "1280x800"x120.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[   676.383] (II) modeset(0): Modeline "1280x800"x119.9  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[   676.383] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[   676.383] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[   676.383] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz d)
[   676.383] (II) modeset(0): Modeline "1280x720"x144.0  367.50  1280 2028 2076 2200  720 1090 1100 1160 +hsync -vsync (167.0 kHz e)
[   676.383] (II) modeset(0): Modeline "1280x720"x120.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[   676.383] (II) modeset(0): Modeline "1280x720"x120.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[   676.383] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[   676.383] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[   676.383] (II) modeset(0): Modeline "1024x768"x144.0  367.50  1024 2028 2076 2200  768 1090 1100 1160 +hsync -vsync (167.0 kHz e)
[   676.383] (II) modeset(0): Modeline "1024x768"x170.0  194.02  1024 1108 1220 1416  768 768 770 806 doublescan -hsync +vsync (137.0 kHz d)
[   676.383] (II) modeset(0): Modeline "1024x768"x150.1  170.24  1024 1108 1220 1416  768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
[   676.383] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   676.383] (II) modeset(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz d)
[   676.383] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz d)
[   676.383] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz d)
[   676.383] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   676.383] (II) modeset(0): Modeline "1024x768i"x43.5   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync (35.5 kHz d)
[   676.383] (II) modeset(0): Modeline "960x720"x170.0  170.68  960 1036 1144 1328  720 720 722 756 doublescan -hsync +vsync (128.5 kHz d)
[   676.383] (II) modeset(0): Modeline "960x720"x150.0  148.50  960 1032 1144 1320  720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
[   676.383] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   676.383] (II) modeset(0): Modeline "928x696"x150.0  144.00  928 992 1104 1280  696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[   676.383] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   676.383] (II) modeset(0): Modeline "896x672"x150.1  130.50  896 944 1052 1228  672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[   676.383] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   676.383] (II) modeset(0): Modeline "1024x576"x119.9   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[   676.383] (II) modeset(0): Modeline "1024x576"x119.9   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[   676.383] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[   676.383] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[   676.383] (II) modeset(0): Modeline "960x600"x119.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[   676.383] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[   676.383] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz d)
[   676.383] (II) modeset(0): Modeline "960x540"x119.9   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[   676.383] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[   676.383] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[   676.383] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[   676.383] (II) modeset(0): Modeline "800x600"x144.0  367.50  800 2028 2076 2200  600 1090 1100 1160 +hsync -vsync (167.0 kHz e)
[   676.383] (II) modeset(0): Modeline "800x600"x170.0  114.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (106.2 kHz d)
[   676.383] (II) modeset(0): Modeline "800x600"x150.0  101.25  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[   676.383] (II) modeset(0): Modeline "800x600"x140.0   94.50  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[   676.383] (II) modeset(0): Modeline "800x600"x130.0   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[   676.383] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   676.383] (II) modeset(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz d)
[   676.383] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz d)
[   676.383] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz d)
[   676.383] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   676.383] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   676.383] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[   676.383] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[   676.383] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[   676.383] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[   676.383] (II) modeset(0): Modeline "700x525"x149.5   77.90  700 732 892 956  525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[   676.383] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   676.383] (II) modeset(0): Modeline "800x450"x119.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[   676.383] (II) modeset(0): Modeline "800x450"x119.6   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[   676.383] (II) modeset(0): Modeline "640x512"x170.0   78.75  640 672 752 864  512 512 514 536 doublescan +hsync +vsync (91.1 kHz d)
[   676.383] (II) modeset(0): Modeline "640x512"x150.0   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[   676.383] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   676.383] (II) modeset(0): Modeline "700x450"x119.9   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[   676.383] (II) modeset(0): Modeline "700x450"x119.8   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[   676.383] (II) modeset(0): Modeline "640x480"x144.0  367.50  640 2028 2076 2200  480 1090 1100 1160 +hsync -vsync (167.0 kHz e)
[   676.383] (II) modeset(0): Modeline "640x480"x170.2   74.25  640 672 752 864  480 480 482 505 doublescan +hsync +vsync (85.9 kHz d)
[   676.383] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   676.383] (II) modeset(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz d)
[   676.383] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz d)
[   676.383] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz d)
[   676.383] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   676.383] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[   676.383] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[   676.383] (II) modeset(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz d)
[   676.383] (II) modeset(0): Modeline "684x384"x119.8   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[   676.383] (II) modeset(0): Modeline "684x384"x119.7   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[   676.383] (II) modeset(0): Modeline "640x400"x119.8   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[   676.383] (II) modeset(0): Modeline "640x400"x120.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[   676.383] (II) modeset(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz d)
[   676.383] (II) modeset(0): Modeline "576x432"x150.0   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[   676.383] (II) modeset(0): Modeline "640x360"x119.7   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[   676.383] (II) modeset(0): Modeline "640x360"x119.7   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[   676.383] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[   676.383] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[   676.383] (II) modeset(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz d)
[   676.383] (II) modeset(0): Modeline "512x384"x170.0   47.25  512 536 584 688  384 384 386 404 doublescan +hsync +vsync (68.7 kHz d)
[   676.383] (II) modeset(0): Modeline "512x384"x150.1   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[   676.383] (II) modeset(0): Modeline "512x384"x140.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[   676.383] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   676.383] (II) modeset(0): Modeline "512x384i"x87.1   22.45  512 516 604 632  384 384 388 408 interlace doublescan +hsync +vsync (35.5 kHz d)
[   676.383] (II) modeset(0): Modeline "512x288"x120.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[   676.383] (II) modeset(0): Modeline "512x288"x119.8   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[   676.383] (II) modeset(0): Modeline "416x312"x149.3   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[   676.383] (II) modeset(0): Modeline "480x270"x119.3   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[   676.383] (II) modeset(0): Modeline "480x270"x119.6   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[   676.383] (II) modeset(0): Modeline "400x300"x170.5   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync (53.7 kHz d)
[   676.383] (II) modeset(0): Modeline "400x300"x144.4   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[   676.383] (II) modeset(0): Modeline "400x300"x150.2   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[   676.383] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   676.383] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   676.383] (II) modeset(0): Modeline "432x243"x119.8   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[   676.383] (II) modeset(0): Modeline "432x243"x119.1   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[   676.383] (II) modeset(0): Modeline "320x240"x170.4   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync (43.3 kHz d)
[   676.383] (II) modeset(0): Modeline "320x240"x145.6   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[   676.383] (II) modeset(0): Modeline "320x240"x150.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[   676.383] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   676.383] (II) modeset(0): Modeline "360x202"x119.0   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[   676.383] (II) modeset(0): Modeline "360x202"x118.3   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[   676.383] (II) modeset(0): Modeline "360x200"x170.1   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync (37.9 kHz d)
[   676.383] (II) modeset(0): Modeline "320x200"x170.5   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync (37.9 kHz d)
[   676.383] (II) modeset(0): Modeline "320x180"x119.7    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[   676.383] (II) modeset(0): Modeline "320x180"x118.6    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[   676.383] (II) modeset(0): Modeline "320x175"x170.5   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync (37.9 kHz d)
[   676.383] (II) modeset(0): EDID for output DP-1
[   676.383] (II) modeset(0): Output eDP-1 connected
[   676.383] (II) modeset(0): Output DP-1 disconnected
[   676.383] (II) modeset(0): Using exact sizes for initial modes
[   676.384] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[   676.384] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   676.384] (==) modeset(0): DPI set to (96, 96)
[   676.384] (II) Loading sub module "fb"
[   676.384] (II) LoadModule: "fb"
[   676.384] (II) Module "fb" already built-in
[   676.384] (==) NVIDIA(G0): Depth 24, (==) framebuffer bpp 32
[   676.384] (==) NVIDIA(G0): RGB weight 888
[   676.384] (==) NVIDIA(G0): Default visual is TrueColor
[   676.384] (==) NVIDIA(G0): Using gamma correction (1.0, 1.0, 1.0)
[   676.384] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[   676.384] (**) NVIDIA(G0): Option "AllowEmptyInitialConfiguration"
[   676.384] (**) NVIDIA(G0): Enabling 2D acceleration
[   676.384] (II) Loading sub module "glxserver_nvidia"
[   676.384] (II) LoadModule: "glxserver_nvidia"
[   676.384] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[   676.392] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[   676.392] 	compiled for 1.6.99.901, module version = 1.0.0
[   676.392] 	Module class: X.Org Server Extension
[   676.392] (II) NVIDIA GLX Module  580.105.08  Wed Oct 29 22:17:01 UTC 2025
[   676.392] (II) NVIDIA: The X server supports PRIME Render Offload.
[   676.395] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[   676.395] (--) NVIDIA(0):     DFP-0
[   676.395] (--) NVIDIA(0):     DFP-1
[   676.395] (--) NVIDIA(0):     DFP-2
[   676.404] (II) NVIDIA(G0): NVIDIA GPU NVIDIA GeForce RTX 3060 Laptop GPU (GA106-A) at
[   676.404] (II) NVIDIA(G0):     PCI:1:0:0 (GPU-0)
[   676.404] (--) NVIDIA(G0): Memory: 6291456 kBytes
[   676.404] (--) NVIDIA(G0): VideoBIOS: 94.06.21.00.12
[   676.404] (II) NVIDIA(G0): Detected PCI Express Link width: 16X
[   676.405] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   676.405] (--) NVIDIA(GPU-0): DFP-0: Internal DisplayPort
[   676.405] (--) NVIDIA(GPU-0): DFP-0: 2670.0 MHz maximum pixel clock
[   676.405] (--) NVIDIA(GPU-0): 
[   676.405] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   676.405] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   676.405] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   676.405] (--) NVIDIA(GPU-0): 
[   676.409] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   676.409] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[   676.409] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[   676.409] (--) NVIDIA(GPU-0): 
[   676.412] (II) NVIDIA(G0): Validated MetaModes:
[   676.412] (II) NVIDIA(G0):     "NULL"
[   676.412] (II) NVIDIA(G0): Virtual screen size determined to be 640 x 480
[   676.412] (WW) NVIDIA(G0): Unable to get display device for DPI computation.
[   676.412] (==) NVIDIA(G0): DPI set to (75, 75); computed from built-in default
[   676.420] (==) modeset(0): Backing store enabled
[   676.420] (==) modeset(0): Silken mouse enabled
[   676.420] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[   676.420] (==) modeset(0): DPMS enabled
[   676.420] (II) modeset(0): [DRI2] Setup complete
[   676.420] (II) modeset(0): [DRI2]   DRI driver: radeonsi
[   676.420] (II) modeset(0): [DRI2]   VDPAU driver: radeonsi
[   676.421] (WW) NVIDIA: Failed to bind sideband socket to
[   676.421] (WW) NVIDIA:     '/var/run/nvidia-xdriver-f89561d8' Permission denied
[   676.421] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[   676.421] (II) NVIDIA:     access.
[   676.493] (WW) NVIDIA(G0): ACPI: failed to determine the system's current power source
[   676.493] (II) NVIDIA(G0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   676.493] (II) NVIDIA(G0):     may not be running or the "AcpidSocketPath" X
[   676.493] (II) NVIDIA(G0):     configuration option may not be set correctly.  When the
[   676.493] (II) NVIDIA(G0):     ACPI event daemon is available, the NVIDIA X driver will
[   676.493] (II) NVIDIA(G0):     try to use it to receive ACPI event notifications.  For
[   676.493] (II) NVIDIA(G0):     details, please see the "ConnectToAcpid" and
[   676.493] (II) NVIDIA(G0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   676.493] (II) NVIDIA(G0):     Config Options in the README.
[   676.507] (II) NVIDIA(G0): Setting mode "NULL"
[   676.532] (==) NVIDIA(G0): Disabling shared memory pixmaps
[   676.532] (==) NVIDIA(G0): Backing store enabled
[   676.532] (==) NVIDIA(G0): Silken mouse enabled
[   676.532] (==) NVIDIA(G0): DPMS enabled
[   676.532] (II) Loading sub module "dri2"
[   676.532] (II) LoadModule: "dri2"
[   676.532] (II) Module "dri2" already built-in
[   676.532] (II) NVIDIA(G0): [DRI2] Setup complete
[   676.532] (II) NVIDIA(G0): [DRI2]   VDPAU driver: nvidia
[   676.532] (II) Initializing extension Generic Event Extension
[   676.532] (II) Initializing extension SHAPE
[   676.532] (II) Initializing extension MIT-SHM
[   676.533] (II) Initializing extension XInputExtension
[   676.533] (II) Initializing extension XTEST
[   676.533] (II) Initializing extension BIG-REQUESTS
[   676.533] (II) Initializing extension SYNC
[   676.533] (II) Initializing extension XKEYBOARD
[   676.533] (II) Initializing extension XC-MISC
[   676.533] (II) Initializing extension SECURITY
[   676.533] (II) Initializing extension XFIXES
[   676.533] (II) Initializing extension RENDER
[   676.533] (II) Initializing extension RANDR
[   676.533] (II) Initializing extension COMPOSITE
[   676.533] (II) Initializing extension DAMAGE
[   676.533] (II) Initializing extension MIT-SCREEN-SAVER
[   676.533] (II) Initializing extension DOUBLE-BUFFER
[   676.533] (II) Initializing extension RECORD
[   676.533] (II) Initializing extension DPMS
[   676.534] (II) Initializing extension Present
[   676.534] (II) Initializing extension DRI3
[   676.534] (II) Initializing extension X-Resource
[   676.534] (II) Initializing extension XVideo
[   676.534] (II) Initializing extension XVideo-MotionCompensation
[   676.534] (II) Initializing extension GLX
[   676.534] (II) Initializing extension GLX
[   676.534] (II) Indirect GLX disabled.
[   676.539] (II) AIGLX: Loaded and initialized radeonsi
[   676.539] (II) GLX: Initialized DRI2 GL provider for screen 0
[   676.539] (II) Initializing extension XFree86-VidModeExtension
[   676.539] (II) Initializing extension XFree86-DGA
[   676.539] (II) Initializing extension XFree86-DRI
[   676.540] (II) Initializing extension DRI2
[   676.540] (II) Initializing extension NV-GLX
[   676.540] (II) Initializing extension NV-CONTROL
[   676.540] (II) modeset(0): Damage tracking initialized
[   676.540] (II) modeset(0): Setting screen physical size to 508 x 285
[   676.594] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   676.594] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   676.594] (**) Power Button: Applying InputClass "system-keyboard"
[   676.594] (II) LoadModule: "libinput"
[   676.594] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   676.596] (II) Module libinput: vendor="X.Org Foundation"
[   676.596] 	compiled for 1.21.1.13, module version = 1.5.0
[   676.596] 	Module class: X.Org XInput Driver
[   676.596] 	ABI class: X.Org XInput driver, version 24.4
[   676.596] (II) Using input driver 'libinput' for 'Power Button'
[   676.596] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 38 paused 0
[   676.596] (**) Power Button: always reports core events
[   676.596] (**) Option "Device" "/dev/input/event2"
[   676.598] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   676.598] (II) event2  - Power Button: device is a keyboard
[   676.598] (II) event2  - Power Button: device removed
[   676.598] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   676.598] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   676.598] (**) Option "xkb_layout" "latin_cyrillic_custom,latin_cyrillic_custom"
[   676.598] (**) Option "xkb_variant" ",cyrillic"
[   676.598] (**) Option "xkb_options" "altwin:swap_lalt_lwin,grp:lctrl_lalt_toggle"
[   676.609] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   676.609] (II) event2  - Power Button: device is a keyboard
[   676.610] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[   676.610] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   676.610] (**) Video Bus: Applying InputClass "system-keyboard"
[   676.610] (II) Using input driver 'libinput' for 'Video Bus'
[   676.611] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 41 paused 0
[   676.611] (**) Video Bus: always reports core events
[   676.611] (**) Option "Device" "/dev/input/event3"
[   676.612] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[   676.612] (II) event3  - Video Bus: device is a keyboard
[   676.612] (II) event3  - Video Bus: device removed
[   676.612] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input3/event3"
[   676.612] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   676.612] (**) Option "xkb_layout" "latin_cyrillic_custom,latin_cyrillic_custom"
[   676.612] (**) Option "xkb_variant" ",cyrillic"
[   676.612] (**) Option "xkb_options" "altwin:swap_lalt_lwin,grp:lctrl_lalt_toggle"
[   676.613] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[   676.613] (II) event3  - Video Bus: device is a keyboard
[   676.614] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   676.614] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   676.614] (**) Video Bus: Applying InputClass "system-keyboard"
[   676.614] (II) Using input driver 'libinput' for 'Video Bus'
[   676.614] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 42 paused 0
[   676.614] (**) Video Bus: always reports core events
[   676.614] (**) Option "Device" "/dev/input/event4"
[   676.615] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   676.615] (II) event4  - Video Bus: device is a keyboard
[   676.615] (II) event4  - Video Bus: device removed
[   676.615] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:01/input/input4/event4"
[   676.615] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[   676.615] (**) Option "xkb_layout" "latin_cyrillic_custom,latin_cyrillic_custom"
[   676.615] (**) Option "xkb_variant" ",cyrillic"
[   676.615] (**) Option "xkb_options" "altwin:swap_lalt_lwin,grp:lctrl_lalt_toggle"
[   676.617] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[   676.617] (II) event4  - Video Bus: device is a keyboard
[   676.617] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   676.617] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   676.617] (**) Power Button: Applying InputClass "system-keyboard"
[   676.617] (II) Using input driver 'libinput' for 'Power Button'
[   676.618] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 43 paused 0
[   676.618] (**) Power Button: always reports core events
[   676.618] (**) Option "Device" "/dev/input/event0"
[   676.618] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   676.618] (II) event0  - Power Button: device is a keyboard
[   676.619] (II) event0  - Power Button: device removed
[   676.619] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[   676.619] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[   676.619] (**) Option "xkb_layout" "latin_cyrillic_custom,latin_cyrillic_custom"
[   676.619] (**) Option "xkb_variant" ",cyrillic"
[   676.619] (**) Option "xkb_options" "altwin:swap_lalt_lwin,grp:lctrl_lalt_toggle"
[   676.619] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   676.619] (II) event0  - Power Button: device is a keyboard
[   676.620] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   676.620] (II) No input driver specified, ignoring this device.
[   676.620] (II) This device may have been added with another device file.
[   676.621] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event13)
[   676.621] (II) No input driver specified, ignoring this device.
[   676.621] (II) This device may have been added with another device file.
[   676.621] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[   676.621] (II) No input driver specified, ignoring this device.
[   676.621] (II) This device may have been added with another device file.
[   676.622] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[   676.622] (II) No input driver specified, ignoring this device.
[   676.622] (II) This device may have been added with another device file.
[   676.622] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event16)
[   676.622] (II) No input driver specified, ignoring this device.
[   676.622] (II) This device may have been added with another device file.
[   676.624] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event5)
[   676.624] (II) No input driver specified, ignoring this device.
[   676.624] (II) This device may have been added with another device file.
[   676.625] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event6)
[   676.625] (**) 2.4G Mouse: Applying InputClass "libinput pointer catchall"
[   676.625] (II) Using input driver 'libinput' for '2.4G Mouse'
[   676.677] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 44 paused 0
[   676.677] (**) 2.4G Mouse: always reports core events
[   676.677] (**) Option "Device" "/dev/input/event6"
[   676.679] (II) event6  - 2.4G Mouse: is tagged by udev as: Mouse
[   676.679] (II) event6  - 2.4G Mouse: device is a pointer
[   676.679] (II) event6  - 2.4G Mouse: device removed
[   676.679] (II) libinput: 2.4G Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   676.679] (II) libinput: 2.4G Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   676.679] (II) libinput: 2.4G Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   676.679] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:07:00.4/usb3/3-2/3-2:1.0/0003:1EA7:0064.0001/input/input7/event6"
[   676.679] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: MOUSE, id 10)
[   676.679] (**) Option "AccelerationScheme" "none"
[   676.679] (**) 2.4G Mouse: (accel) selected scheme none/0
[   676.679] (**) 2.4G Mouse: (accel) acceleration factor: 2.000
[   676.679] (**) 2.4G Mouse: (accel) acceleration threshold: 4
[   676.681] (II) event6  - 2.4G Mouse: is tagged by udev as: Mouse
[   676.681] (II) event6  - 2.4G Mouse: device is a pointer
[   676.682] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/mouse0)
[   676.682] (II) No input driver specified, ignoring this device.
[   676.682] (II) This device may have been added with another device file.
[   676.682] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event17)
[   676.682] (II) No input driver specified, ignoring this device.
[   676.682] (II) This device may have been added with another device file.
[   676.683] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event18)
[   676.683] (II) No input driver specified, ignoring this device.
[   676.683] (II) This device may have been added with another device file.
[   676.684] (II) config/udev: Adding input device SYNA32B9:00 06CB:CE7D Mouse (/dev/input/event9)
[   676.684] (**) SYNA32B9:00 06CB:CE7D Mouse: Applying InputClass "libinput pointer catchall"
[   676.684] (II) Using input driver 'libinput' for 'SYNA32B9:00 06CB:CE7D Mouse'
[   676.684] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 45 paused 0
[   676.684] (**) SYNA32B9:00 06CB:CE7D Mouse: always reports core events
[   676.684] (**) Option "Device" "/dev/input/event9"
[   676.685] (II) event9  - SYNA32B9:00 06CB:CE7D Mouse: is tagged by udev as: Mouse
[   676.685] (II) event9  - SYNA32B9:00 06CB:CE7D Mouse: device is a pointer
[   676.686] (II) event9  - SYNA32B9:00 06CB:CE7D Mouse: device removed
[   676.686] (II) libinput: SYNA32B9:00 06CB:CE7D Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   676.686] (II) libinput: SYNA32B9:00 06CB:CE7D Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   676.686] (II) libinput: SYNA32B9:00 06CB:CE7D Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[   676.686] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32B9:00/0018:06CB:CE7D.0002/input/input14/event9"
[   676.686] (II) XINPUT: Adding extended input device "SYNA32B9:00 06CB:CE7D Mouse" (type: MOUSE, id 11)
[   676.686] (**) Option "AccelerationScheme" "none"
[   676.686] (**) SYNA32B9:00 06CB:CE7D Mouse: (accel) selected scheme none/0
[   676.686] (**) SYNA32B9:00 06CB:CE7D Mouse: (accel) acceleration factor: 2.000
[   676.686] (**) SYNA32B9:00 06CB:CE7D Mouse: (accel) acceleration threshold: 4
[   676.687] (II) event9  - SYNA32B9:00 06CB:CE7D Mouse: is tagged by udev as: Mouse
[   676.687] (II) event9  - SYNA32B9:00 06CB:CE7D Mouse: device is a pointer
[   676.688] (II) config/udev: Adding input device SYNA32B9:00 06CB:CE7D Mouse (/dev/input/mouse1)
[   676.688] (II) No input driver specified, ignoring this device.
[   676.688] (II) This device may have been added with another device file.
[   676.688] (II) config/udev: Adding input device SYNA32B9:00 06CB:CE7D Touchpad (/dev/input/event10)
[   676.688] (**) SYNA32B9:00 06CB:CE7D Touchpad: Applying InputClass "libinput touchpad catchall"
[   676.688] (**) SYNA32B9:00 06CB:CE7D Touchpad: Applying InputClass "system-touchpad"
[   676.688] (II) Using input driver 'libinput' for 'SYNA32B9:00 06CB:CE7D Touchpad'
[   676.689] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 46 paused 0
[   676.689] (**) SYNA32B9:00 06CB:CE7D Touchpad: always reports core events
[   676.689] (**) Option "Device" "/dev/input/event10"
[   676.690] (II) event10 - SYNA32B9:00 06CB:CE7D Touchpad: is tagged by udev as: Touchpad
[   676.691] (II) event10 - SYNA32B9:00 06CB:CE7D Touchpad: device is a touchpad
[   676.691] (II) event10 - SYNA32B9:00 06CB:CE7D Touchpad: device removed
[   676.691] (II) libinput: SYNA32B9:00 06CB:CE7D Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[   676.691] (II) libinput: SYNA32B9:00 06CB:CE7D Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[   676.691] (II) libinput: SYNA32B9:00 06CB:CE7D Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[   676.691] (**) Option "ScrollMethod" "edge"
[   676.692] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32B9:00/0018:06CB:CE7D.0002/input/input15/event10"
[   676.692] (II) XINPUT: Adding extended input device "SYNA32B9:00 06CB:CE7D Touchpad" (type: TOUCHPAD, id 12)
[   676.693] (**) Option "AccelerationScheme" "none"
[   676.693] (**) SYNA32B9:00 06CB:CE7D Touchpad: (accel) selected scheme none/0
[   676.693] (**) SYNA32B9:00 06CB:CE7D Touchpad: (accel) acceleration factor: 2.000
[   676.693] (**) SYNA32B9:00 06CB:CE7D Touchpad: (accel) acceleration threshold: 4
[   676.694] (II) event10 - SYNA32B9:00 06CB:CE7D Touchpad: is tagged by udev as: Touchpad
[   676.695] (II) event10 - SYNA32B9:00 06CB:CE7D Touchpad: device is a touchpad
[   676.696] (II) config/udev: Adding input device SYNA32B9:00 06CB:CE7D Touchpad (/dev/input/mouse2)
[   676.696] (**) SYNA32B9:00 06CB:CE7D Touchpad: Applying InputClass "system-touchpad"
[   676.696] (II) Using input driver 'libinput' for 'SYNA32B9:00 06CB:CE7D Touchpad'
[   676.696] (**) SYNA32B9:00 06CB:CE7D Touchpad: always reports core events
[   676.696] (**) Option "Device" "/dev/input/mouse2"
[   676.696] (EE) xf86OpenSerial: Cannot open device /dev/input/mouse2
	Permission denied.
[   676.696] (II) mouse2: opening input device '/dev/input/mouse2' failed (Permission denied).
[   676.696] (II) mouse2  - failed to create input device '/dev/input/mouse2'.
[   676.696] (EE) libinput: SYNA32B9:00 06CB:CE7D Touchpad: Failed to create a device for /dev/input/mouse2
[   676.696] (EE) PreInit returned 2 for "SYNA32B9:00 06CB:CE7D Touchpad"
[   676.696] (II) UnloadModule: "libinput"
[   676.697] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event7)
[   676.697] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   676.697] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[   676.697] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   676.697] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 47 paused 0
[   676.697] (**) AT Translated Set 2 keyboard: always reports core events
[   676.697] (**) Option "Device" "/dev/input/event7"
[   676.698] (II) event7  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   676.698] (II) event7  - AT Translated Set 2 keyboard: device is a keyboard
[   676.699] (II) event7  - AT Translated Set 2 keyboard: device removed
[   676.699] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event7"
[   676.699] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[   676.699] (**) Option "xkb_layout" "latin_cyrillic_custom,latin_cyrillic_custom"
[   676.699] (**) Option "xkb_variant" ",cyrillic"
[   676.699] (**) Option "xkb_options" "altwin:swap_lalt_lwin,grp:lctrl_lalt_toggle"
[   676.700] (II) event7  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   676.700] (II) event7  - AT Translated Set 2 keyboard: device is a keyboard
[   676.701] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[   676.701] (II) No input driver specified, ignoring this device.
[   676.701] (II) This device may have been added with another device file.
[   676.704] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[   676.704] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   676.704] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[   676.704] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[   676.705] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 48 paused 0
[   676.705] (**) HP WMI hotkeys: always reports core events
[   676.705] (**) Option "Device" "/dev/input/event12"
[   676.705] (II) event12 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[   676.705] (II) event12 - HP WMI hotkeys: device is a keyboard
[   676.705] (II) event12 - HP WMI hotkeys: device removed
[   676.705] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event12"
[   676.705] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[   676.705] (**) Option "xkb_layout" "latin_cyrillic_custom,latin_cyrillic_custom"
[   676.705] (**) Option "xkb_variant" ",cyrillic"
[   676.705] (**) Option "xkb_options" "altwin:swap_lalt_lwin,grp:lctrl_lalt_toggle"
[   676.706] (II) event12 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[   676.706] (II) event12 - HP WMI hotkeys: device is a keyboard
[   676.707] (II) config/udev: Adding input device Wireless hotkeys (/dev/input/event8)
[   676.707] (**) Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[   676.707] (**) Wireless hotkeys: Applying InputClass "system-keyboard"
[   676.707] (II) Using input driver 'libinput' for 'Wireless hotkeys'
[   676.707] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 49 paused 0
[   676.707] (**) Wireless hotkeys: always reports core events
[   676.707] (**) Option "Device" "/dev/input/event8"
[   676.708] (II) event8  - Wireless hotkeys: is tagged by udev as: Keyboard
[   676.708] (II) event8  - Wireless hotkeys: device is a keyboard
[   676.708] (II) event8  - Wireless hotkeys: device removed
[   676.708] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[   676.708] (II) XINPUT: Adding extended input device "Wireless hotkeys" (type: KEYBOARD, id 15)
[   676.708] (**) Option "xkb_layout" "latin_cyrillic_custom,latin_cyrillic_custom"
[   676.708] (**) Option "xkb_variant" ",cyrillic"
[   676.708] (**) Option "xkb_options" "altwin:swap_lalt_lwin,grp:lctrl_lalt_toggle"
[   676.708] (II) event8  - Wireless hotkeys: is tagged by udev as: Keyboard
[   676.708] (II) event8  - Wireless hotkeys: device is a keyboard
[   676.734] (II) modeset(0): Disabling kernel dirty updates, not required.
[   676.754] (II) modeset(0): EDID vendor "BOE", prod id 2733
[   676.754] (II) modeset(0): Printing DDC gathered Modelines:
[   676.754] (II) modeset(0): Modeline "1920x1080"x0.0  367.50  1920 2028 2076 2200  1080 1090 1100 1160 +hsync -vsync (167.0 kHz eP)
[   676.754] (II) modeset(0): Modeline "1920x1080"x0.0  153.20  1920 2028 2076 2200  1080 1090 1100 1160 +hsync -vsync (69.6 kHz e)
[   676.757] (**) Option "fd" "38"
[   676.757] (II) event2  - Power Button: device removed
[   676.758] (**) Option "fd" "41"
[   676.758] (II) event3  - Video Bus: device removed
[   676.758] (**) Option "fd" "42"
[   676.758] (II) event4  - Video Bus: device removed
[   676.758] (**) Option "fd" "43"
[   676.758] (II) event0  - Power Button: device removed
[   676.758] (**) Option "fd" "44"
[   676.758] (II) event6  - 2.4G Mouse: device removed
[   676.758] (**) Option "fd" "45"
[   676.758] (II) event9  - SYNA32B9:00 06CB:CE7D Mouse: device removed
[   676.758] (**) Option "fd" "46"
[   676.758] (II) event10 - SYNA32B9:00 06CB:CE7D Touchpad: device removed
[   676.758] (**) Option "fd" "47"
[   676.758] (II) event7  - AT Translated Set 2 keyboard: device removed
[   676.758] (**) Option "fd" "48"
[   676.758] (II) event12 - HP WMI hotkeys: device removed
[   676.758] (**) Option "fd" "49"
[   676.758] (II) event8  - Wireless hotkeys: device removed
[   676.761] (II) UnloadModule: "libinput"
[   676.761] (II) systemd-logind: releasing fd for 13:72
[   676.762] (II) UnloadModule: "libinput"
[   676.762] (II) systemd-logind: releasing fd for 13:76
[   676.762] (II) UnloadModule: "libinput"
[   676.762] (II) systemd-logind: releasing fd for 13:71
[   676.762] (II) UnloadModule: "libinput"
[   676.762] (II) systemd-logind: releasing fd for 13:74
[   676.762] (II) UnloadModule: "libinput"
[   676.762] (II) systemd-logind: releasing fd for 13:73
[   676.762] (II) UnloadModule: "libinput"
[   676.762] (II) systemd-logind: releasing fd for 13:70
[   676.763] (II) UnloadModule: "libinput"
[   676.763] (II) systemd-logind: releasing fd for 13:64
[   676.763] (II) UnloadModule: "libinput"
[   676.763] (II) systemd-logind: releasing fd for 13:68
[   676.763] (II) UnloadModule: "libinput"
[   676.763] (II) systemd-logind: releasing fd for 13:67
[   676.763] (II) UnloadModule: "libinput"
[   676.764] (II) systemd-logind: releasing fd for 13:66
[   676.790] (II) NVIDIA(GPU-0): Deleting GPU-0
[   677.461] (II) Server terminated successfully (0). Closing log file.

Please help sad

Last edited by TeaMaster (2025-12-13 22:35:38)

Offline

#2 2025-12-13 14:45:54

Scimmia
Fellow
Registered: 2012-09-01
Posts: 13,724

Re: [SOLVED] Can't startx after an update

TeaMaster wrote:

I've just updated today and I get greeted with the tty when turning my laptop on.

If you're using startx, isn't this normal? What are you expecting to see?

TeaMaster wrote:

Also, paru crashes with a message that it lacks libalpm.14.so.

You are responsible for rebuilding AUR packages when they need to be.

Offline

#3 2025-12-13 15:05:08

TeaMaster
Member
Registered: 2024-06-30
Posts: 18

Re: [SOLVED] Can't startx after an update

Scimmia wrote:

If you're using startx, isn't this normal? What are you expecting to see?

No, I use ly dm, but it doesn't start, so I tried using startx. When I run ly from the tty and try to log in, it simply says that it "failed to initialize user".

Scimmia wrote:

You are responsible for rebuilding AUR packages when they need to be.

When I do git clone https://aur.archlinux.org/paru-bin.git && cd paru-bin && makepkg -si, it just reinstalls it and doesn't fix anything.

Last edited by TeaMaster (2025-12-13 22:40:14)

Offline

#4 2025-12-13 15:40:59

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 14,951

Re: [SOLVED] Can't startx after an update

paru-bin installs a binary image, rebuilding that requires upstream to update the binary image.

Try https://aur.archlinux.org/packages/paru as that builds from source and was updated yesterday.
If that doesn't help, start a new thread about it.

As for the other issue:

[   677.461] (II) Server terminated successfully (0). Closing log file.

There's no sign of problems in xorg log, check your xinitrc .

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#5 2025-12-13 15:46:22

TeaMaster
Member
Registered: 2024-06-30
Posts: 18

Re: [SOLVED] Can't startx after an update

Lone_Wolf wrote:

There's no sign of problems in xorg log, check your xinitrc .

cat ~/.xinitrc:

#!/bin/bash
xrandr --setprovideroutputsource modesetting NVIDIA-G0
xrandr --auto

Last edited by TeaMaster (2025-12-13 15:47:24)

Offline

#6 2025-12-13 15:52:45

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 14,951

Re: [SOLVED] Can't startx after an update

you're missing several important lines and are not asking X to start anything.

https://wiki.archlinux.org/title/Xinit#xinitrc

Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#7 2025-12-13 15:53:02

Scimmia
Fellow
Registered: 2012-09-01
Posts: 13,724

Re: [SOLVED] Can't startx after an update

How do you expect that to start i3?

https://wiki.archlinux.org/title/Xinit#xinitrc

Offline

#8 2025-12-13 22:32:12

TeaMaster
Member
Registered: 2024-06-30
Posts: 18

Re: [SOLVED] Can't startx after an update

Okay, maybe I was stupid with the startx, but I've managed to fix the issue. I had to run these two commands:

sudo systemctl disable getty@tty2.service
sudo systemctl enable ly@tty2.service

I definetely did not interfere with this stuff before, so it has to be some weird issue, but it's okay already big_smile

Offline

#9 2025-12-13 22:34:52

TeaMaster
Member
Registered: 2024-06-30
Posts: 18

Re: [SOLVED] Can't startx after an update

As for the paru issue, it's already open on github: https://github.com/Morganamilo/paru/issues/1454. So recompiling won't simply fix it, I gotta wait until the developers update it.

Last edited by TeaMaster (2025-12-13 22:41:40)

Offline

#10 2025-12-13 22:36:08

Scimmia
Fellow
Registered: 2012-09-01
Posts: 13,724

Re: [SOLVED] Can't startx after an update

Not a weird issue at all, pacman told you about it when you updated. https://gitlab.archlinux.org/archlinux/ … e=heads#L5

Offline

#11 2025-12-13 22:43:09

TeaMaster
Member
Registered: 2024-06-30
Posts: 18

Re: [SOLVED] Can't startx after an update

Scimmia wrote:

Not a weird issue at all, pacman told you about it when you updated. https://gitlab.archlinux.org/archlinux/ … e=heads#L5

Aw hell nah, I would have saved so much time if I had seen it. It's always that pacman spams a bunch of unimportant garbage and I'm supposed to notice stuff like this.

Offline

#12 2025-12-13 22:47:12

TeaMaster
Member
Registered: 2024-06-30
Posts: 18

Re: [SOLVED] Can't startx after an update

Also, the paru (not -bin) package in the aur has already been updated (https://aur.archlinux.org/cgit/aur.git/ … 6a8d7bd586), but it fails to compile.

Offline

Pages: 1

Board footer

Powered by FluxBB