You are not logged in.

Pages: 1

#1 2026-01-06 22:41:04

zhenghe
Member
Registered: 2026-01-05
Posts: 5

[SOLVED] Audio Stopped Working After Update

After updating my Lenovo Slim 7 Auro running Hyprland on it to version 0.53, the audio stopped working. Pavucontrol says there is only a dummy output and my laptop's actual speakers are not listed anywhere. Plugging in earbuds through the audio jack does nothing but audio is able to work through bluetooth only. I have pipewire, pipewire-pulse, pipewire-alsa, alsa-utils, sof-firmware, and alsa-ucm-conf. I do not however have pulseaudio installed.

I suspect there isn't a hardware-level issue due to this output:

lspci | grep -i audio

00:1f.3 Multimedia audio controller: Intel Corporation Lunar Lake-M HD Audio Controller (rev 10)

I also suspect there isn't an issue with my kernel modules because I get this output and it seems fine, though I'm no expert:

lsmod | grep snd

snd_seq_dummy 12288 0
snd_hrtimer 12288 1
snd_seq 135168 7 snd_seq_dummy
snd_seq_device 16384 1 snd_seq
snd_soc_sof_sdw 53248 0
snd_soc_intel_hda_dsp_common 16384 1 snd_soc_sof_sdw
snd_soc_sdw_utils 118784 1 snd_soc_sof_sdw
snd_sof_probes 36864 0
snd_soc_cs42l43 389120 0
snd_soc_cs42l43_sdw 12288 1 snd_soc_cs42l43
snd_soc_rt711_sdca 61440 0
regmap_sdw_mbq 16384 1 snd_soc_rt711_sdca
regmap_sdw 12288 2 cs42l43_sdw,snd_soc_rt711_sdca
snd_hda_codec_intelhdmi 28672 0
snd_soc_dmic 12288 0
snd_hda_intel 69632 0
snd_sof_pci_intel_lnl 16384 0
snd_sof_pci_intel_mtl 36864 1 snd_sof_pci_intel_lnl
snd_sof_intel_hda_generic 40960 2 snd_sof_pci_intel_mtl,snd_sof_pci_intel_lnl
soundwire_intel 94208 1 snd_sof_intel_hda_generic
snd_sof_intel_hda_sdw_bpt 24576 1 soundwire_intel
snd_sof_intel_hda_common 204800 4 snd_sof_pci_intel_mtl,snd_sof_intel_hda_sdw_bpt,snd_sof_pci_intel_lnl,snd_sof_intel_hda_generic
snd_soc_hdac_hda 24576 1 snd_sof_intel_hda_common
snd_sof_intel_hda_mlink 36864 5 snd_sof_intel_hda_sdw_bpt,snd_sof_pci_intel_lnl,soundwire_intel,snd_sof_intel_hda_common,snd_sof_intel_hda_generic
snd_sof_intel_hda 20480 2 snd_sof_intel_hda_common,snd_sof_intel_hda_generic
snd_hda_codec_hdmi 61440 1 snd_hda_codec_intelhdmi
snd_sof_pci 24576 3 snd_sof_pci_intel_mtl,snd_sof_pci_intel_lnl,snd_sof_intel_hda_generic
snd_sof_xtensa_dsp 16384 1 snd_sof_intel_hda_generic
snd_sof 479232 8 snd_sof_pci_intel_mtl,snd_sof_intel_hda_sdw_bpt,snd_sof_pci_intel_lnl,snd_sof_pci,snd_sof_intel_hda_common,snd_sof_intel_hda_generic,snd_sof_probes,snd_sof_intel_hda
snd_sof_utils 16384 1 snd_sof
snd_hda_ext_core 36864 5 snd_sof_intel_hda_sdw_bpt,snd_sof_intel_hda_common,snd_soc_hdac_hda,snd_sof_intel_hda_mlink,snd_sof_intel_hda
snd_hda_codec 217088 6 snd_hda_codec_hdmi,snd_hda_intel,snd_soc_intel_hda_dsp_common,snd_soc_hdac_hda,snd_sof_intel_hda,snd_hda_codec_intelhdmi
snd_hda_core 147456 9 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_ext_core,snd_hda_codec,snd_soc_intel_hda_dsp_common,snd_sof_intel_hda_common,snd_soc_hdac_hda,snd_sof_intel_hda,snd_hda_codec_intelhdmi
snd_intel_dspcfg 45056 4 snd_hda_intel,snd_sof,snd_sof_intel_hda_common,snd_sof_intel_hda_generic
snd_intel_sdw_acpi 16384 2 snd_intel_dspcfg,snd_sof_intel_hda_generic
snd_soc_acpi_intel_match 143360 3 snd_sof_pci_intel_mtl,snd_sof_pci_intel_lnl,snd_sof_intel_hda_generic
snd_ctl_led 28672 0
snd_soc_acpi_intel_sdca_quirks 12288 1 snd_soc_acpi_intel_match
snd_soc_acpi 16384 2 snd_soc_acpi_intel_match,snd_sof_intel_hda_generic
snd_hwdep 24576 1 snd_hda_codec
soundwire_bus 1208320 9 regmap_sdw,regmap_sdw_mbq,snd_soc_cs42l43_sdw,soundwire_intel,cs42l43_sdw,snd_soc_sdw_utils,snd_soc_rt711_sdca,soundwire_generic_allocation,soundwire_cadence
snd_soc_sdca 98304 2 snd_soc_acpi_intel_sdca_quirks,soundwire_bus
snd_soc_core 430080 11 snd_soc_sof_sdw,snd_soc_cs42l43,soundwire_intel,snd_sof,snd_soc_sdca,snd_sof_intel_hda_common,snd_soc_sdw_utils,snd_soc_hdac_hda,snd_soc_rt711_sdca,snd_sof_probes,snd_soc_dmic
snd_compress 32768 2 snd_soc_core,snd_sof_probes
ac97_bus 12288 1 snd_soc_core
snd_pcm_dmaengine 20480 1 snd_soc_core
snd_pcm 212992 16 snd_soc_cs42l43,snd_hda_codec_hdmi,snd_hda_intel,snd_soc_cs42l43_sdw,snd_hda_codec,soundwire_intel,snd_sof,snd_soc_sdca,snd_sof_intel_hda_common,snd_compress,snd_sof_intel_hda_generic,snd_soc_rt711_sdca,snd_soc_core,snd_sof_utils,snd_hda_core,snd_pcm_dmaengine
snd_timer 57344 3 snd_seq,snd_hrtimer,snd_pcm
snd 159744 18 snd_ctl_led,snd_soc_sof_sdw,snd_seq,snd_soc_cs42l43,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_sof,snd_soc_sdca,snd_timer,snd_compress,snd_soc_sdw_utils,snd_soc_core,snd_pcm
soundcore 16384 2 snd_ctl_led,snd

Unmuting channels hasn't fixed the issue either:

amixer sset Master unmute
      amixer sset Speaker unmute
      amixer sset Headphone unmute

Simple mixer control 'Master',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 65536
  Mono:
  Front Left: Playback 64225 [98%] [on]
  Front Right: Playback 64225 [98%] [on]
amixer: Unable to find simple control 'Speaker',0

amixer: Unable to find simple control 'Headphone',0

However running speaker-test -c 2 -t wav results in no sound output:

here are some other outputs:

aplay -lL

null
    Discard all samples (playback) or generate zero samples (capture)
pipewire
    PipeWire Sound Server
default
    Default ALSA Output (currently PipeWire Media Server)
aplay: device_list:279: no soundcards found...
sudo fuser -v /dev/snd/*
                     USER PID ACCESS COMMAND
/dev/snd/seq: orchidman 947 F.... pipewire

Last edited by zhenghe (Yesterday 20:34:22)

Offline

#2 2026-01-06 22:52:29

Scimmia
Fellow
Registered: 2012-09-01
Posts: 13,419

Re: [SOLVED] Audio Stopped Working After Update

Update from what kernel, to what kernel? https://bbs.archlinux.org/viewtopic.php?id=310227

Online

#3 2026-01-07 05:39:15

zhenghe
Member
Registered: 2026-01-05
Posts: 5

Re: [SOLVED] Audio Stopped Working After Update

I don't know of a way to confirm, but I believe it was from kernel 6.15.8 to kernel 6.18.2

Offline

#4 2026-01-07 09:11:40

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,065

Re: [SOLVED] Audio Stopped Working After Update

/var/log/pacman.log knows

aplay: device_list:279: no soundcards found...

Please post your complete system journal for the boot: 

sudo journalctl -b | curl -F 'file=@-' 0x0.st

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2026-01-07 15:34:28

Scimmia
Fellow
Registered: 2012-09-01
Posts: 13,419

Re: [SOLVED] Audio Stopped Working After Update

zhenghe wrote:

I don't know of a way to confirm, but I believe it was from kernel 6.15.8 to kernel 6.18.2

That fits the case in the linked thread.

Online

#6 2026-01-11 03:50:43

zhenghe
Member
Registered: 2026-01-05
Posts: 5

Re: [SOLVED] Audio Stopped Working After Update

seth wrote:

/var/log/pacman.log knows

It says kernel 6.15.9.arch1-1 -> 6.18.2.arch2-1

seth wrote:

Please post your complete system journal for the boot: 

sudo journalctl -b | curl -F 'file=@-' 0x0.st

running this command in my terminal gives no output

Last edited by zhenghe (2026-01-11 05:24:11)

Offline

#7 2026-01-11 05:01:26

zhenghe
Member
Registered: 2026-01-05
Posts: 5

Re: [SOLVED] Audio Stopped Working After Update

Scimmia wrote:
zhenghe wrote:

I don't know of a way to confirm, but I believe it was from kernel 6.15.8 to kernel 6.18.2

That fits the case in the linked thread.

Currently taking a look and will marked as solved if it solves my issue

Offline

#8 2026-01-11 21:30:40

verbatim1711
Member
Registered: 2026-01-11
Posts: 4

Re: [SOLVED] Audio Stopped Working After Update

I am having this issue too but however it was working on 6.16.2-arch2-1
Upgrading from 6.18.2 to 6.18.4 broke sound for me.

$ lspci | grep -i audio
24:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller

My audio device shows up as usual, just not producing sound. Nothing odd in dmesg

Offline

#9 2026-01-11 22:03:56

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,065

Re: [SOLVED] Audio Stopped Working After Update

it was working on 6.16.2-arch2-1 Upgrading from 6.18.2 to 6.18.4

Please confirm the three versions there, but https://bbs.archlinux.org/viewtopic.php?id=310227 would have affected 6.18.2

sudo journalctl -b | curl -F 'file=@-' 0x0.st

running this command in my terminal gives no output

The command will either get you a link or an error, can you open https://0x0.st ?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#10 2026-01-11 22:18:22

verbatim1711
Member
Registered: 2026-01-11
Posts: 4

Re: [SOLVED] Audio Stopped Working After Update

I can confirm the versions. Currently on 6.16.2-arch2-1 (after rollback) and my audio is working. Updating to 6.18.4.arch1-1 and audio stopped working.

I also did a full system upgrade apart from kernel version and audio was still working fine

Offline

#11 Yesterday 01:50:51

zhenghe
Member
Registered: 2026-01-05
Posts: 5

Re: [SOLVED] Audio Stopped Working After Update

zhenghe wrote:

Currently taking a look and will marked as solved if it solves my issue

Upgrading to 6.18.4 fixed the sound issue for me, I can wait until verbatim1711's issue is resolved to mark the thread as solved if it is appropriate.

Offline

#12 Yesterday 08:45:25

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,065

Re: [SOLVED] Audio Stopped Working After Update

@verbatim1711 the odd number in your post was  "6.18.2" and from your response I assume that was a typo?
If it's indeed not fixed w/ 4 6.18.4 you'd not fall into https://bbs.archlinux.org/viewtopic.php?id=310227 or this thread and will have to open a new one, illustrating the status quo w/ your journal and ideally test which kernel update between 6.16.2 and 6.18.4 broke things (notably whether it's linux 6.17.7 to linux 6.17.8)

@zhenghe if it's fixed for you /w 6.18.4, this is a duplicate of https://bbs.archlinux.org/viewtopic.php?id=310227 and you can mark the thread a solved

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 Yesterday 09:31:19

Silgrond
Member
Registered: 2025-03-20
Posts: 11

Re: [SOLVED] Audio Stopped Working After Update

I have the same issue on my ASUS Zenbook 14 UM425. Updated today, no audio anymore from my speakers, pavucontrol only shows dummy audio. Plugging in a headset through the USB-C slot it it switches automatically and has output.
Using to the to the lts kernel does not fix it for me.
uname -a                                         

 
Linux arch 6.12.65-1-lts #1 SMP PREEMPT_DYNAMIC Sun, 11 Jan 2026 17:06:24 +0000 x86_64 GNU/Linux

lspci | grep -i audio                                                 

04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Renoir/Cezanne HDMI/DP Audio Controller
04:00.5 Multimedia controller: Advanced Micro Devices, Inc. [AMD] Audio Coprocessor (rev 01)
04:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Ryzen HD Audio Controller

sudo fuser -v /dev/snd/*                                         

[sudo] password for silgrond:
                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  silgrond   2844 F.... pipewire
                     silgrond   2846 F.... wireplumber
/dev/snd/controlC1:  silgrond   2844 F.... pipewire
                     silgrond   2846 F.... wireplumber
/dev/snd/controlC2:  silgrond   2844 F.... pipewire
                     silgrond   2846 F.... wireplumber
/dev/snd/seq:        silgrond   2844 F.... pipewire

pactl info                                                            

Server String: /run/user/1000/pulse/native
Library Protocol Version: 35
Server Protocol Version: 35
Is Local: yes
Client Index: 375
Tile Size: 65472
User Name: silgrond
Host Name: arch
Server Name: PulseAudio (on PipeWire 1.4.9)
Server Version: 15.0.0
Default Sample Specification: float32le 2ch 48000Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_04_00.1.pro-output-3
Default Source: alsa_input.pci-0000_04_00.6.HiFi__Mic1__source
Cookie: 2ae2:ad4d

~  pactl list sinks                                                      

Sink #302
    State: SUSPENDED
    Name: alsa_output.pci-0000_04_00.1.pro-output-3
    Description: Renoir/Cezanne HDMI/DP Audio Controller Pro
    Driver: PipeWire
    Sample Specification: s32le 8ch 48000Hz
    Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
    Owner Module: 4294967295
    Mute: no
    Volume: aux0: 65536 / 100% / 0.00 dB,   aux1: 65536 / 100% / 0.00 dB,   aux2: 65536 / 100% / 0.00 dB,   aux3: 65536 / 100% / 0.00 dB,   aux4: 65536 / 100% / 0.00 dB,   aux5: 65536 / 100% / 0.00 dB,   aux6: 65536 / 100% / 0.00 dB,   aux7: 65536 / 100% / 0.00 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_04_00.1.pro-output-3.monitor
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY
    Properties:
        object.path = "alsa:acp:Generic_1:3:playback"
        api.alsa.path = "hw:0,3"
        api.alsa.pcm.card = "0"
        api.alsa.pcm.stream = "playback"
        port.group = "playback"
        device.icon_name = "audio-card-analog"
        device.bus = "pci"
        audio.channels = "8"
        audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
        device.routes = "0"
        alsa.resolution_bits = "32"
        alsa.card = "0"
        alsa.card_name = "HD-Audio Generic"
        alsa.long_card_name = "HD-Audio Generic at 0xfccc8000 irq 86"
        alsa.driver_name = "snd_hda_intel"
        alsa.mixer_name = "ATI R6xx HDMI"
        alsa.components = "HDA:1002aa01,00aa0100,00100700"
        alsa.id = "Generic_1"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "HDMI 0"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "3"
        alsa.sync.id = "00000000:00000000:00000000:00000000"
        clock.name = "api.alsa.0"
        device.profile.pro = "true"
        device.profile.name = "pro-output-3"
        device.profile.description = "Pro"
        card.profile.device = "3"
        device.id = "51"
        factory.name = "api.alsa.pcm.sink"
        node.pause-on-idle = "false"
        priority.driver = "1196"
        priority.session = "1196"
        media.class = "Audio/Sink"
        node.name = "alsa_output.pci-0000_04_00.1.pro-output-3"
        node.nick = "HDMI 0"
        device.description = "Renoir/Cezanne HDMI/DP Audio Controller"
        api.alsa.card.name = "HD-Audio Generic"
        api.alsa.card.longname = "HD-Audio Generic at 0xfccc8000 irq 86"
        factory.id = "19"
        clock.quantum-limit = "8192"
        client.id = "47"
        node.driver = "true"
        node.loop.name = "data-loop.0"
        library.name = "audioconvert/libspa-audioconvert"
        object.id = "143"
        object.serial = "302"
        device.enum.api = "udev"
        api.alsa.card = "0"
        device.plugged.usec = "7220031"
        device.bus_path = "pci-0000:04:00.1"
        sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0"
        device.subsystem = "sound"
        device.vendor.id = "0x1002"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
        device.product.id = "0x1637"
        device.product.name = "Renoir/Cezanne HDMI/DP Audio Controller"
        device.name = "alsa_card.pci-0000_04_00.1"
        device.nick = "HD-Audio Generic"
        api.alsa.use-acp = "true"
        api.acp.auto-profile = "false"
        api.acp.auto-port = "false"
        api.dbus.ReserveDevice1.Priority = "-20"
        api.alsa.split-enable = "true"
        api.dbus.ReserveDevice1 = "Audio0"
        spa.object.id = "2"
        device.string = "0"
    Formats:
        pcm

Sink #303
    State: SUSPENDED
    Name: alsa_output.pci-0000_04_00.1.pro-output-7
    Description: Renoir/Cezanne HDMI/DP Audio Controller Pro 7
    Driver: PipeWire
    Sample Specification: s32le 8ch 48000Hz
    Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
    Owner Module: 4294967295
    Mute: no
    Volume: aux0: 65536 / 100% / 0.00 dB,   aux1: 65536 / 100% / 0.00 dB,   aux2: 65536 / 100% / 0.00 dB,   aux3: 65536 / 100% / 0.00 dB,   aux4: 65536 / 100% / 0.00 dB,   aux5: 65536 / 100% / 0.00 dB,   aux6: 65536 / 100% / 0.00 dB,   aux7: 65536 / 100% / 0.00 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_04_00.1.pro-output-7.monitor
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY
    Properties:
        object.path = "alsa:acp:Generic_1:4:playback"
        api.alsa.path = "hw:0,7"
        api.alsa.pcm.card = "0"
        api.alsa.pcm.stream = "playback"
        port.group = "playback"
        device.icon_name = "audio-card-analog"
        device.bus = "pci"
        audio.channels = "8"
        audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
        device.routes = "0"
        alsa.resolution_bits = "32"
        alsa.card = "0"
        alsa.card_name = "HD-Audio Generic"
        alsa.long_card_name = "HD-Audio Generic at 0xfccc8000 irq 86"
        alsa.driver_name = "snd_hda_intel"
        alsa.mixer_name = "ATI R6xx HDMI"
        alsa.components = "HDA:1002aa01,00aa0100,00100700"
        alsa.id = "Generic_1"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "HDMI 1"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "7"
        alsa.sync.id = "00000000:00000000:00000000:00000000"
        clock.name = "api.alsa.0"
        device.profile.pro = "true"
        device.profile.name = "pro-output-7"
        device.profile.description = "Pro 7"
        card.profile.device = "4"
        device.id = "51"
        factory.name = "api.alsa.pcm.sink"
        node.pause-on-idle = "false"
        priority.driver = "1132"
        priority.session = "1132"
        media.class = "Audio/Sink"
        node.name = "alsa_output.pci-0000_04_00.1.pro-output-7"
        node.nick = "HDMI 1"
        device.description = "Renoir/Cezanne HDMI/DP Audio Controller"
        api.alsa.card.name = "HD-Audio Generic"
        api.alsa.card.longname = "HD-Audio Generic at 0xfccc8000 irq 86"
        factory.id = "19"
        clock.quantum-limit = "8192"
        client.id = "47"
        node.driver = "true"
        node.loop.name = "data-loop.0"
        library.name = "audioconvert/libspa-audioconvert"
        object.id = "90"
        object.serial = "303"
        device.enum.api = "udev"
        api.alsa.card = "0"
        device.plugged.usec = "7220031"
        device.bus_path = "pci-0000:04:00.1"
        sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0"
        device.subsystem = "sound"
        device.vendor.id = "0x1002"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
        device.product.id = "0x1637"
        device.product.name = "Renoir/Cezanne HDMI/DP Audio Controller"
        device.name = "alsa_card.pci-0000_04_00.1"
        device.nick = "HD-Audio Generic"
        api.alsa.use-acp = "true"
        api.acp.auto-profile = "false"
        api.acp.auto-port = "false"
        api.dbus.ReserveDevice1.Priority = "-20"
        api.alsa.split-enable = "true"
        api.dbus.ReserveDevice1 = "Audio0"
        spa.object.id = "2"
        device.string = "0"
    Formats:
        pcm

Sink #304
    State: SUSPENDED
    Name: alsa_output.pci-0000_04_00.1.pro-output-8
    Description: Renoir/Cezanne HDMI/DP Audio Controller Pro 8
    Driver: PipeWire
    Sample Specification: s32le 8ch 48000Hz
    Channel Map: aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
    Owner Module: 4294967295
    Mute: no
    Volume: aux0: 65536 / 100% / 0.00 dB,   aux1: 65536 / 100% / 0.00 dB,   aux2: 65536 / 100% / 0.00 dB,   aux3: 65536 / 100% / 0.00 dB,   aux4: 65536 / 100% / 0.00 dB,   aux5: 65536 / 100% / 0.00 dB,   aux6: 65536 / 100% / 0.00 dB,   aux7: 65536 / 100% / 0.00 dB
            balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_04_00.1.pro-output-8.monitor
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY
    Properties:
        object.path = "alsa:acp:Generic_1:5:playback"
        api.alsa.path = "hw:0,8"
        api.alsa.pcm.card = "0"
        api.alsa.pcm.stream = "playback"
        port.group = "playback"
        device.icon_name = "audio-card-analog"
        device.bus = "pci"
        audio.channels = "8"
        audio.position = "AUX0,AUX1,AUX2,AUX3,AUX4,AUX5,AUX6,AUX7"
        device.routes = "0"
        alsa.resolution_bits = "32"
        alsa.card = "0"
        alsa.card_name = "HD-Audio Generic"
        alsa.long_card_name = "HD-Audio Generic at 0xfccc8000 irq 86"
        alsa.driver_name = "snd_hda_intel"
        alsa.mixer_name = "ATI R6xx HDMI"
        alsa.components = "HDA:1002aa01,00aa0100,00100700"
        alsa.id = "Generic_1"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "HDMI 2"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "8"
        alsa.sync.id = "00000000:00000000:00000000:00000000"
        clock.name = "api.alsa.0"
        device.profile.pro = "true"
        device.profile.name = "pro-output-8"
        device.profile.description = "Pro 8"
        card.profile.device = "5"
        device.id = "51"
        factory.name = "api.alsa.pcm.sink"
        node.pause-on-idle = "false"
        priority.driver = "1116"
        priority.session = "1116"
        media.class = "Audio/Sink"
        node.name = "alsa_output.pci-0000_04_00.1.pro-output-8"
        node.nick = "HDMI 2"
        device.description = "Renoir/Cezanne HDMI/DP Audio Controller"
        api.alsa.card.name = "HD-Audio Generic"
        api.alsa.card.longname = "HD-Audio Generic at 0xfccc8000 irq 86"
        factory.id = "19"
        clock.quantum-limit = "8192"
        client.id = "47"
        node.driver = "true"
        node.loop.name = "data-loop.0"
        library.name = "audioconvert/libspa-audioconvert"
        object.id = "89"
        object.serial = "304"
        device.enum.api = "udev"
        api.alsa.card = "0"
        device.plugged.usec = "7220031"
        device.bus_path = "pci-0000:04:00.1"
        sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0"
        device.subsystem = "sound"
        device.vendor.id = "0x1002"
        device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
        device.product.id = "0x1637"
        device.product.name = "Renoir/Cezanne HDMI/DP Audio Controller"
        device.name = "alsa_card.pci-0000_04_00.1"
        device.nick = "HD-Audio Generic"
        api.alsa.use-acp = "true"
        api.acp.auto-profile = "false"
        api.acp.auto-port = "false"
        api.dbus.ReserveDevice1.Priority = "-20"
        api.alsa.split-enable = "true"
        api.dbus.ReserveDevice1 = "Audio0"
        spa.object.id = "2"
        device.string = "0"
    Formats:
        pcm

Update:

Does not work with 6.18.3-arch1 (https://bbs.archlinux.org/viewtopic.php … 2#p2281932) nor with 6.17.3-arch2 (https://bbs.archlinux.org/viewtopic.php … 5#p2274605) either.

Last edited by Silgrond (Yesterday 12:55:59)

Offline

#14 Yesterday 14:23:22

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,065

Re: [SOLVED] Audio Stopped Working After Update

Updated today, no audio anymore from my speakers

=> /var/log/pacman.log, what was updated?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#15 Yesterday 15:13:45

Silgrond
Member
Registered: 2025-03-20
Posts: 11

Re: [SOLVED] Audio Stopped Working After Update

seth wrote:

Updated today, no audio anymore from my speakers

=> /var/log/pacman.log, what was updated?

Thanks for your reply!

[2026-01-12T10:58:43+0900] [PACMAN] Running 'pacman -Syu'
[2026-01-12T10:58:43+0900] [PACMAN] synchronizing package lists
[2026-01-12T10:58:43+0900] [PACMAN] starting full system upgrade
[2026-01-12T11:00:55+0900] [PACMAN] Running 'pacman -Rns kwallet'
[2026-01-12T11:03:02+0900] [ALPM] running '60-mkinitcpio-remove.hook'...
[2026-01-12T11:03:03+0900] [ALPM] running '71-dkms-remove.hook'...
[2026-01-12T11:03:03+0900] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod xone/0.4.8 -k 6.18.3-arch1-1
[2026-01-12T11:03:04+0900] [ALPM-SCRIPTLET] ==> depmod 6.18.3-arch1-1
[2026-01-12T11:03:07+0900] [ALPM] transaction started
[2026-01-12T11:03:07+0900] [ALPM] upgraded linux-api-headers (6.17-1 -> 6.18-1)
[2026-01-12T11:03:07+0900] [ALPM] upgraded glibc (2.42+r33+gde1fe81f4714-1 -> 2.42+r47+ga1d3294a5bed-1)
[2026-01-12T11:03:07+0900] [ALPM-SCRIPTLET] Generating locales...
[2026-01-12T11:03:08+0900] [ALPM-SCRIPTLET]   en_DK.UTF-8... done
[2026-01-12T11:03:09+0900] [ALPM-SCRIPTLET]   en_US.UTF-8... done
[2026-01-12T11:03:10+0900] [ALPM-SCRIPTLET]   hu_HU.UTF-8... done
[2026-01-12T11:03:11+0900] [ALPM-SCRIPTLET]   ja_JP.UTF-8... done
[2026-01-12T11:03:11+0900] [ALPM-SCRIPTLET] Generation complete.
[2026-01-12T11:03:11+0900] [ALPM] upgraded gcc-libs (15.2.1+r301+gf24307422d1d-1 -> 15.2.1+r447+g6a64f6c3ebb8-1)
[2026-01-12T11:03:11+0900] [ALPM] upgraded ada (3.3.0-1 -> 3.4.1-1)
[2026-01-12T11:03:11+0900] [ALPM] upgraded alsa-ucm-conf (1.2.15.1-1 -> 1.2.15.2-1)
[2026-01-12T11:03:11+0900] [ALPM] upgraded alsa-lib (1.2.15.1-1 -> 1.2.15.2-1)
[2026-01-12T11:03:12+0900] [ALPM] upgraded sqlite (3.51.1-1 -> 3.51.2-1)
[2026-01-12T11:03:12+0900] [ALPM] upgraded util-linux-libs (2.41.3-1 -> 2.41.3-2)
[2026-01-12T11:03:12+0900] [ALPM] upgraded glib2 (2.86.3-1 -> 2.86.3-2)
[2026-01-12T11:03:12+0900] [ALPM] upgraded libcap-ng (0.8.5-3 -> 0.8.5-4)
[2026-01-12T11:03:12+0900] [ALPM] upgraded audit (4.1.2-1 -> 4.1.2-2)
[2026-01-12T11:03:12+0900] [ALPM] upgraded xcb-proto (1.17.0-3 -> 1.17.0-4)
[2026-01-12T11:03:12+0900] [ALPM] upgraded at-spi2-core (2.58.2-1 -> 2.58.3-1)
[2026-01-12T11:03:12+0900] [ALPM] upgraded avahi (1:0.9rc2-1 -> 1:0.9rc2-3)
[2026-01-12T11:03:12+0900] [ALPM] upgraded icu (78.1-1 -> 78.2-1)
[2026-01-12T11:03:12+0900] [ALPM] upgraded libxml2 (2.15.1-4 -> 2.15.1-5)
[2026-01-12T11:03:12+0900] [ALPM] upgraded llvm-libs (21.1.6-1 -> 21.1.6-2)
[2026-01-12T11:03:12+0900] [ALPM] upgraded brotli (1.1.0-3 -> 1.2.0-1)
[2026-01-12T11:03:13+0900] [ALPM] upgraded libtasn1 (4.20.0-1 -> 4.21.0-1)
[2026-01-12T11:03:13+0900] [ALPM] upgraded ca-certificates-mozilla (3.119.1-1 -> 3.120-1)
[2026-01-12T11:03:13+0900] [ALPM] upgraded binutils (2.45.1-1 -> 2.45.1+r35+g12d0a1dbc1b9-1)
[2026-01-12T11:03:13+0900] [ALPM] upgraded gcc (15.2.1+r301+gf24307422d1d-1 -> 15.2.1+r447+g6a64f6c3ebb8-1)
[2026-01-12T11:03:14+0900] [ALPM] upgraded clang (21.1.6-1 -> 21.1.6-3)
[2026-01-12T11:03:14+0900] [ALPM] upgraded bcc (0.35.0-6 -> 0.35.0-7)
[2026-01-12T11:03:14+0900] [ALPM] upgraded python (3.13.11-1 -> 3.14.2-2)
[2026-01-12T11:03:14+0900] [ALPM] upgraded python-cairo (1.29.0-1 -> 1.29.0-2)
[2026-01-12T11:03:14+0900] [ALPM] upgraded libgirepository (1.86.0-1 -> 1.86.0-2)
[2026-01-12T11:03:14+0900] [ALPM] upgraded gobject-introspection-runtime (1.86.0-1 -> 1.86.0-2)
[2026-01-12T11:03:14+0900] [ALPM] upgraded python-gobject (3.54.5-1 -> 3.54.5-2)
[2026-01-12T11:03:15+0900] [ALPM] upgraded mesa (1:25.3.3-1 -> 1:25.3.3-2)
[2026-01-12T11:03:15+0900] [ALPM] upgraded libthai (0.1.29-3 -> 0.1.30-1)
[2026-01-12T11:03:15+0900] [ALPM] upgraded libseccomp (2.5.6-1 -> 2.6.0-1)
[2026-01-12T11:03:15+0900] [ALPM] upgraded lcms2 (2.17-1 -> 2.18-1)
[2026-01-12T11:03:15+0900] [ALPM] upgraded nss (3.119.1-1 -> 3.120-1)
[2026-01-12T11:03:15+0900] [ALPM] upgraded blueman (2.4.6-1 -> 2.4.6-2)
[2026-01-12T11:03:15+0900] [ALPM] upgraded boost-libs (1.89.0-3 -> 1.89.0-4)
[2026-01-12T11:03:15+0900] [ALPM] upgraded botan (3.10.0-1 -> 3.10.0-2)
[2026-01-12T11:03:17+0900] [ALPM] upgraded breeze-icons (6.21.0-1 -> 6.22.0-1)
[2026-01-12T11:03:17+0900] [ALPM] upgraded liblouis (3.36.0-1 -> 3.36.0-2)
[2026-01-12T11:03:17+0900] [ALPM] upgraded libspeechd (0.12.1-2 -> 0.12.1-3)
[2026-01-12T11:03:17+0900] [ALPM] upgraded util-linux (2.41.3-1 -> 2.41.3-2)
[2026-01-12T11:03:18+0900] [ALPM] upgraded brltty (6.8-5 -> 6.8-6)
[2026-01-12T11:03:18+0900] [ALPM-SCRIPTLET] Please add your user to the brlapi group.
[2026-01-12T11:03:18+0900] [ALPM] upgraded nftables (1:1.1.6-1 -> 1:1.1.6-2)
[2026-01-12T11:03:18+0900] [ALPM] upgraded protobuf (33.1-1 -> 33.1-3)
[2026-01-12T11:03:18+0900] [ALPM] upgraded python-protobuf (33.1-1 -> 33.1-3)
[2026-01-12T11:03:18+0900] [ALPM] upgraded criu (4.2-1 -> 4.2-2)
[2026-01-12T11:03:18+0900] [ALPM] upgraded crun (1.25.1-1 -> 1.26-3)
[2026-01-12T11:03:18+0900] [ALPM] upgraded cython (3.2.4-1 -> 3.2.4-2)
[2026-01-12T11:03:18+0900] [ALPM] upgraded gstreamer (1.26.10-1 -> 1.26.10-2)
[2026-01-12T11:03:19+0900] [ALPM] upgraded gst-plugins-base-libs (1.26.10-1 -> 1.26.10-2)
[2026-01-12T11:03:19+0900] [ALPM] upgraded dleyna (0.8.3-3 -> 0.8.3-4)
[2026-01-12T11:03:19+0900] [ALPM] upgraded sdl3 (3.2.28-1 -> 3.4.0-1)
[2026-01-12T11:03:19+0900] [ALPM] upgraded liblc3 (1.1.3-1 -> 1.1.3-2)
[2026-01-12T11:03:19+0900] [ALPM] upgraded lilv (0.26.2-1 -> 0.26.2-2)
[2026-01-12T11:03:19+0900] [ALPM] upgraded fluidsynth (2.5.1-1 -> 2.5.2-1)
[2026-01-12T11:03:19+0900] [ALPM] upgraded fontforge (20251009-4 -> 20251009-5)
[2026-01-12T11:03:19+0900] [ALPM] upgraded libgedit-gtksourceview (299.5.0-2 -> 299.6.0-1)
[2026-01-12T11:03:19+0900] [ALPM] upgraded libgedit-tepl (6.13.0-2 -> 6.14.0-1)
[2026-01-12T11:03:19+0900] [ALPM] upgraded gedit (48.2-1 -> 49.0-2)
[2026-01-12T11:03:19+0900] [ALPM] upgraded glew (2.2.0-7 -> 2.3.0-2)
[2026-01-12T11:03:19+0900] [ALPM] upgraded glusterfs (1:11.2-1 -> 1:11.2-2)
[2026-01-12T11:03:19+0900] [ALPM-SCRIPTLET] -- Read https://gluster.readthedocs.io/en/latest/Upgrade-Guide/ page!
[2026-01-12T11:03:19+0900] [ALPM] upgraded libnotify (0.8.7-2 -> 0.8.8-1)
[2026-01-12T11:03:19+0900] [ALPM] upgraded gst-plugins-bad-libs (1.26.10-1 -> 1.26.10-2)
[2026-01-12T11:03:19+0900] [ALPM] upgraded gnome-tweaks (49.0-1 -> 49.0-2)
[2026-01-12T11:03:19+0900] [ALPM] upgraded goocanvas (3.0.0-9 -> 3.0.0-10)
[2026-01-12T11:03:19+0900] [ALPM] upgraded gpsd (3.27.3-1 -> 3.27.3-2)
[2026-01-12T11:03:19+0900] [ALPM] upgraded gst-plugin-gtk (1.26.10-1 -> 1.26.10-2)
[2026-01-12T11:03:19+0900] [ALPM] upgraded gst-plugins-base (1.26.10-1 -> 1.26.10-2)
[2026-01-12T11:03:19+0900] [ALPM] upgraded libcaca (0.99.beta20-5 -> 0.99.beta20-6)
[2026-01-12T11:03:20+0900] [ALPM] upgraded gst-plugins-good (1.26.10-1 -> 1.26.10-2)
[2026-01-12T11:03:20+0900] [ALPM] upgraded hugo (0.154.2-1 -> 0.154.4-1)
[2026-01-12T11:03:20+0900] [ALPM] upgraded libibus (1.5.33-1 -> 1.5.33-3)
[2026-01-12T11:03:20+0900] [ALPM] upgraded ibus (1.5.33-1 -> 1.5.33-3)
[2026-01-12T11:03:20+0900] [ALPM] upgraded imath (3.2.2-2 -> 3.2.2-3)
[2026-01-12T11:03:20+0900] [ALPM] upgraded python-packaging (25.0-1 -> 25.0-4)
[2026-01-12T11:03:20+0900] [ALPM] upgraded python-pillow (12.1.0-1 -> 12.1.0-2)
[2026-01-12T11:03:20+0900] [ALPM] upgraded libxslt (1.1.45-1 -> 1.1.45-2)
[2026-01-12T11:03:20+0900] [ALPM] upgraded python-lxml (6.0.2-1 -> 6.0.2-2)
[2026-01-12T11:03:20+0900] [ALPM] upgraded python-pikepdf (10.1.0-1 -> 10.2.0-1)
[2026-01-12T11:03:20+0900] [ALPM] upgraded img2pdf (0.6.1-1 -> 0.6.1-2)
[2026-01-12T11:03:20+0900] [ALPM] upgraded kconfig (6.21.0-1 -> 6.22.0-1)
[2026-01-12T11:03:20+0900] [ALPM] upgraded kguiaddons (6.21.0-1 -> 6.22.0-1)
[2026-01-12T11:03:20+0900] [ALPM] upgraded ki18n (6.21.0-1 -> 6.22.0-1)
[2026-01-12T11:03:20+0900] [ALPM] upgraded kcolorscheme (6.21.0-1 -> 6.22.0-1)
[2026-01-12T11:03:20+0900] [ALPM] upgraded kcoreaddons (6.21.0-1 -> 6.22.0-1)
[2026-01-12T11:03:20+0900] [ALPM] upgraded kcrash (6.21.0-1 -> 6.22.0-1)
[2026-01-12T11:03:20+0900] [ALPM] upgraded kdbusaddons (6.21.0-1 -> 6.22.0-1)
[2026-01-12T11:03:20+0900] [ALPM] upgraded kitemviews (6.21.0-1 -> 6.22.0-1)
[2026-01-12T11:03:20+0900] [ALPM] upgraded kitty-terminfo (0.45.0-3 -> 0.45.0-4)
[2026-01-12T11:03:20+0900] [ALPM] upgraded kitty-shell-integration (0.45.0-3 -> 0.45.0-4)
[2026-01-12T11:03:21+0900] [ALPM] upgraded kitty (0.45.0-3 -> 0.45.0-4)
[2026-01-12T11:03:21+0900] [ALPM] upgraded tdb (1.4.14-1 -> 1.4.14-2)
[2026-01-12T11:03:21+0900] [ALPM] upgraded knotifications (6.21.0-1 -> 6.22.0-1)
[2026-01-12T11:03:21+0900] [ALPM] upgraded kwidgetsaddons (6.21.0-1 -> 6.22.0-1)
[2026-01-12T11:03:21+0900] [ALPM] upgraded kwindowsystem (6.21.0-1 -> 6.22.0-1)
[2026-01-12T11:03:21+0900] [ALPM] upgraded kwallet (6.21.0-1 -> 6.22.0-1)
[2026-01-12T11:03:21+0900] [ALPM] upgraded talloc (2.4.3-1 -> 2.4.3-2)
[2026-01-12T11:03:21+0900] [ALPM] upgraded tevent (1:0.17.1-1 -> 1:0.17.1-2)
[2026-01-12T11:03:21+0900] [ALPM] upgraded ldb (2:4.23.4-1 -> 2:4.23.4-2)
[2026-01-12T11:03:21+0900] [ALPM] upgraded lensfun (1:0.3.4-5 -> 1:0.3.4-6)
[2026-01-12T11:03:21+0900] [ALPM] upgraded lib32-glibc (2.42+r33+gde1fe81f4714-1 -> 2.42+r47+ga1d3294a5bed-1)
[2026-01-12T11:03:21+0900] [ALPM] upgraded lib32-gcc-libs (15.2.1+r301+gf24307422d1d-1 -> 15.2.1+r447+g6a64f6c3ebb8-1)
[2026-01-12T11:03:21+0900] [ALPM] upgraded lib32-alsa-lib (1.2.15.1-1 -> 1.2.15.2-1)
[2026-01-12T11:03:21+0900] [ALPM] upgraded lib32-icu (78.1-2 -> 78.2-1)
[2026-01-12T11:03:21+0900] [ALPM] upgraded lib32-libtasn1 (4.20.0-1 -> 4.21.0-1)
[2026-01-12T11:03:21+0900] [ALPM] upgraded lib32-mesa (1:25.3.3-1 -> 1:25.3.3-2)
[2026-01-12T11:03:21+0900] [ALPM] upgraded lib32-sqlite (3.51.1-1 -> 3.51.2-1)
[2026-01-12T11:03:21+0900] [ALPM] upgraded lib32-nss (3.119.1-1 -> 3.120-1)
[2026-01-12T11:03:21+0900] [ALPM] upgraded vulkan-mesa-implicit-layers (1:25.3.3-1 -> 1:25.3.3-2)
[2026-01-12T11:03:21+0900] [ALPM] upgraded lib32-vulkan-mesa-implicit-layers (1:25.3.3-1 -> 1:25.3.3-2)
[2026-01-12T11:03:21+0900] [ALPM] upgraded vulkan-radeon (1:25.3.3-1 -> 1:25.3.3-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded lib32-vulkan-radeon (1:25.3.3-1 -> 1:25.3.3-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libblockdev (3.4.0-1 -> 3.4.0-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded volume_key (0.3.12-11 -> 0.3.12-12)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libblockdev-crypto (3.4.0-1 -> 3.4.0-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libbytesize (2.11-1 -> 2.11-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libblockdev-fs (3.4.0-1 -> 3.4.0-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libblockdev-loop (3.4.0-1 -> 3.4.0-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libblockdev-mdraid (3.4.0-1 -> 3.4.0-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libnvme (1.16.1-1 -> 1.16.1-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libblockdev-nvme (3.4.0-1 -> 3.4.0-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libblockdev-part (3.4.0-1 -> 3.4.0-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libblockdev-smart (3.4.0-1 -> 3.4.0-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libblockdev-swap (3.4.0-1 -> 3.4.0-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libgexiv2 (0.14.6-1 -> 0.14.6-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libieee1284 (0.2.11-18 -> 0.2.11-19)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libplist (2.7.0-1 -> 2.7.0-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libimobiledevice (1.4.0-1 -> 1.4.0-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libiptcdata (1.0.5-4 -> 1.0.5-5)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libixion (0.20.0-3 -> 0.20.0-4)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libmupdf (1.27.0-1 -> 1.27.0-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libnewt (0.52.25-1 -> 0.52.25-2)
[2026-01-12T11:03:22+0900] [ALPM] upgraded liborcus (0.21.0-2 -> 0.21.0-3)
[2026-01-12T11:03:22+0900] [ALPM] upgraded libpwquality (1.4.5-6 -> 1.4.5-7)
[2026-01-12T11:03:24+0900] [ALPM] upgraded libreoffice-fresh (25.8.4-1 -> 25.8.4-2)
[2026-01-12T11:03:24+0900] [ALPM] upgraded libtorrent-rasterbar (1:2.0.11-5 -> 1:2.0.11-7)
[2026-01-12T11:03:24+0900] [ALPM] upgraded libwbclient (2:4.23.4-1 -> 2:4.23.4-2)
[2026-01-12T11:03:26+0900] [ALPM] upgraded linux (6.18.3.arch1-1 -> 6.18.4.arch1-1)
[2026-01-12T11:03:26+0900] [ALPM] upgraded pahole (1:1.31-1 -> 1:1.31-2)
[2026-01-12T11:03:29+0900] [ALPM] upgraded linux-headers (6.18.3.arch1-1 -> 6.18.4.arch1-1)
[2026-01-12T11:03:29+0900] [ALPM] upgraded luajit (2.1.1765228720+7152e15-1 -> 2.1.1767980792+707c12b-1)
[2026-01-12T11:03:29+0900] [ALPM] upgraded ninja (1.13.2-1 -> 1.13.2-2)
[2026-01-12T11:03:29+0900] [ALPM] upgraded python-tqdm (4.67.1-3 -> 4.67.1-5)
[2026-01-12T11:03:30+0900] [ALPM] upgraded meson (1.10.0-1 -> 1.10.0-4)
[2026-01-12T11:03:30+0900] [ALPM] upgraded miniupnpc (2.3.3-1 -> 2.3.3-2)
[2026-01-12T11:03:30+0900] [ALPM] upgraded sdl2-compat (2.32.60-1 -> 2.32.62-1)
[2026-01-12T11:03:30+0900] [ALPM] upgraded vapoursynth (73-1 -> 73-2)
[2026-01-12T11:03:30+0900] [ALPM] upgraded nautilus-python (4.1.0-1 -> 4.1.0-2)
[2026-01-12T11:03:30+0900] [ALPM] upgraded net-snmp (5.9.4-7 -> 5.9.5.2-1)
[2026-01-12T11:03:30+0900] [ALPM] upgraded obs-studio (32.0.2-2 -> 32.0.2-3)
[2026-01-12T11:03:30+0900] [ALPM] upgraded onetbb (2022.3.0-2 -> 2022.3.0-3)
[2026-01-12T11:03:30+0900] [ALPM] upgraded opencv (4.12.0-17 -> 4.12.0-18)
[2026-01-12T11:03:30+0900] [ALPM] upgraded python-dbus (1.4.0-1 -> 1.4.0-2)
[2026-01-12T11:03:30+0900] [ALPM] upgraded python-dasbus (1.7-4 -> 1.7-5)
[2026-01-12T11:03:30+0900] [ALPM] upgraded python-psutil (7.1.3-1 -> 7.2.1-1)
[2026-01-12T11:03:30+0900] [ALPM] upgraded python-setproctitle (1.3.7-1 -> 1.3.7-2)
[2026-01-12T11:03:30+0900] [ALPM] upgraded python-pyxdg (0.28-4 -> 0.28-6)
[2026-01-12T11:03:30+0900] [ALPM] upgraded speech-dispatcher (0.12.1-2 -> 0.12.1-3)
[2026-01-12T11:03:31+0900] [ALPM] upgraded orca (49.5-1 -> 49.5-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-six (1.17.0-1 -> 1.17.0-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-dateutil (2.9.0-6 -> 2.9.0-8)
[2026-01-12T11:03:31+0900] [ALPM] upgraded pdfarranger (1.12.1-1 -> 1.12.1-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded perl-business-isbn-data (20251223.001-1 -> 20260109.001-1)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-click (8.2.1-1 -> 8.3.1-1)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-dotenv (1.2.1-1 -> 1.2.1-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-yaml (6.0.3-1 -> 6.0.3-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded podman-compose (1.5.0-1 -> 1.5.0-2)
[2026-01-12T11:03:31+0900] [ALPM] installed mesa-utils (9.0.0-7)
[2026-01-12T11:03:31+0900] [ALPM] installed qrencode (4.1.1-4)
[2026-01-12T11:03:31+0900] [ALPM] upgraded prismlauncher (9.4-1 -> 10.0.1-1)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-dbus-fast (3.1.2-1 -> 3.1.2-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-bcc (0.35.0-6 -> 0.35.0-7)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-pycparser (2.23-1 -> 2.23-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-cffi (2.0.0-1 -> 2.0.0-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-cryptography (46.0.3-1 -> 46.0.3-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-distro (1.9.0-3 -> 1.9.0-4)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-markupsafe (3.0.2-1 -> 3.0.2-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-jinja (1:3.1.6-1 -> 1:3.1.6-3)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-aiohappyeyeballs (2.6.1-3 -> 2.6.1-4)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-frozenlist (1.8.0-1 -> 1.8.0-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-aiosignal (1.4.0-2 -> 1.4.0-3)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-attrs (25.4.0-1 -> 25.4.0-3)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-multidict (6.7.0-2 -> 6.7.0-5)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-propcache (0.4.1-1 -> 0.4.1-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-idna (3.11-1 -> 3.11-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-yarl (1.22.0-1 -> 1.23.0-1)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-aiohttp (3.13.2-1 -> 3.13.3-1)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-bcrypt (5.0.0-1 -> 5.0.0-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-gnupg (0.5.6-1 -> 0.5.6-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-zipp (3.21.0-2 -> 3.21.0-4)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-importlib-metadata (8.7.1-1 -> 8.7.1-3)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-pyopenssl (25.3.0-1 -> 25.3.0-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-charset-normalizer (3.4.4-1 -> 3.4.4-2)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-urllib3 (2.6.2-1 -> 2.6.3-1)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-requests (2.32.5-1 -> 2.32.5-3)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-proton-core (0.7.0-2 -> 0.7.0-3)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-proton-vpn-local-agent (1.6.0-1 -> 1.6.0-3)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-pynacl (1.6.1-1 -> 1.6.2-1)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-certifi (2025.11.12-1 -> 2026.01.04-1)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-sentry_sdk (2.47.0-1 -> 2.49.0-1)
[2026-01-12T11:03:31+0900] [ALPM] upgraded python-fido2 (2.0.0-1 -> 2.0.0-2)
[2026-01-12T11:03:32+0900] [ALPM] upgraded python-proton-vpn-api-core (4.14.1-3 -> 4.14.1-4)
[2026-01-12T11:03:32+0900] [ALPM] upgraded proton-vpn-daemon (0.13.4-3 -> 0.13.4-4)
[2026-01-12T11:03:32+0900] [ALPM] upgraded python-more-itertools (10.8.0-1 -> 10.8.0-2)
[2026-01-12T11:03:32+0900] [ALPM] upgraded python-jaraco.classes (3.4.0-2 -> 3.4.0-3)
[2026-01-12T11:03:32+0900] [ALPM] upgraded python-jaraco.context (6.0.1-1 -> 6.0.1-3)
[2026-01-12T11:03:32+0900] [ALPM] upgraded python-jaraco.functools (4.1.0-1 -> 4.1.0-3)
[2026-01-12T11:03:32+0900] [ALPM] upgraded python-jeepney (0.9.0-2 -> 0.9.0-3)
[2026-01-12T11:03:32+0900] [ALPM] upgraded python-secretstorage (3.3.3-6 -> 3.3.3-7)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-keyring (25.7.0-1 -> 25.7.0-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-proton-keyring-linux (0.2.1-2 -> 0.2.1-3)
[2026-01-12T11:03:33+0900] [ALPM] upgraded proton-vpn-gtk-app (4.13.1-1 -> 4.13.1-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-appdirs (1.4.4-11 -> 1.4.4-12)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-argcomplete (3.6.2-1 -> 3.6.2-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-soupsieve (2.8.1-1 -> 2.8.1-3)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-typing_extensions (4.15.0-1 -> 4.15.0-3)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-beautifulsoup4 (4.14.3-1 -> 4.14.3-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-pyparsing (3.3.1-1 -> 3.3.1-3)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-bibtexparser (1.4.3-2 -> 1.4.3-3)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-brotli (1.1.0-3 -> 1.2.0-1)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-filelock (3.20.0-2 -> 3.20.2-1)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-msgpack (1.1.2-1 -> 1.1.2-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-cachecontrol (1:0.14.4-1 -> 1:0.14.4-3)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-chardet (5.2.0-6 -> 5.2.0-7)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-cssselect (1.3.0-1 -> 1.3.0-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-webencodings (0.5.1-12 -> 0.5.1-13)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-tinycss2 (1.5.1-1 -> 1.5.1-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-cssselect2 (0.8.0-1 -> 0.8.0-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-deprecation (2.1.0-10 -> 2.1.0-11)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-fonttools (4.61.1-1 -> 4.61.1-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-html5lib (1.1-15 -> 1.1-17)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-numpy (2.4.0-1 -> 2.4.1-1)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-imageio (2.37.2-1 -> 2.37.2-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-importlib_resources (6.5.2-1 -> 6.5.2-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-libevdev (0.11-5 -> 0.11-6)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-lockfile (0.12.2-14 -> 0.12.2-15)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-mdurl (0.1.2-8 -> 0.1.2-9)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-markdown-it-py (4.0.0-1 -> 4.0.0-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-mpd2 (3.1.2-1 -> 3.1.2-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-pdfminer (20250506-1 -> 20250506-2)
[2026-01-12T11:03:33+0900] [ALPM] upgraded python-ptyprocess (0.7.0-8 -> 0.7.0-9)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-pexpect (4.9.0-4 -> 4.9.0-7)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-wheel (0.45.1-1 -> 0.45.1-4)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-pip (25.3-1 -> 25.3-3)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-userpath (1.9.2-3 -> 1.9.2-4)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-platformdirs (4.5.1-1 -> 4.5.1-3)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-pipx (1.8.0-1 -> 1.8.0-2)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-pluggy (1.6.0-1 -> 1.6.0-3)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-pydyf (0.12.1-1 -> 0.12.1-2)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-pygments (2.19.2-1 -> 2.19.2-3)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-pyphen (0.17.2-1 -> 0.17.2-2)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-pyqt6-sip (13.10.3-1 -> 13.10.3-2)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-pyqt6 (6.10.2-1 -> 6.10.2-2)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-pyserial (3.5-7 -> 3.5-8)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-reportlab (4.2.2-5 -> 4.2.2-6)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-rich (14.2.0-1 -> 14.2.0-2)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-tinyhtml5 (2.0.0-1 -> 2.0.0-2)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-zopfli (0.4.0-1 -> 0.4.0-2)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-weasyprint (67.0-1 -> 67.0-2)
[2026-01-12T11:03:34+0900] [ALPM] upgraded python-zstandard (0.25.0-1 -> 0.25.0-2)
[2026-01-12T11:03:34+0900] [ALPM] upgraded qtermwidget (2.3.0-1 -> 2.3.0-2)
[2026-01-12T11:03:34+0900] [ALPM] upgraded ranger (1.9.4-4 -> 1.9.4-5)
[2026-01-12T11:03:35+0900] [ALPM] upgraded reaper (7.58-1 -> 7.59-1)
[2026-01-12T11:03:35+0900] [ALPM] upgraded reflector (2023-3 -> 2023-4)
[2026-01-12T11:03:35+0900] [ALPM] upgraded sane (1.4.0-1 -> 1.4.0-3)
[2026-01-12T11:03:35+0900] [ALPM] upgraded scour (0.38.2-5 -> 0.38.2-6)
[2026-01-12T11:03:35+0900] [ALPM] upgraded setzer (66-3 -> 66-4)
[2026-01-12T11:03:35+0900] [ALPM] upgraded smbclient (2:4.23.4-1 -> 2:4.23.4-2)
[2026-01-12T11:03:36+0900] [ALPM] upgraded sudo (1.9.17.p2-1 -> 1.9.17.p2-2)
[2026-01-12T11:03:36+0900] [ALPM] upgraded telegram-desktop (6.4.1-1 -> 6.4.2-1)
[2026-01-12T11:03:36+0900] [ALPM] upgraded xapp-symbolic-icons (1.0.7-2 -> 1.0.8-1)
[2026-01-12T11:03:36+0900] [ALPM] upgraded xapp (3.2.1-1 -> 3.2.2-1)
[2026-01-12T11:03:36+0900] [ALPM] upgraded timeshift (25.12.2-1 -> 25.12.4-1)
[2026-01-12T11:03:36+0900] [ALPM-SCRIPTLET] TimeShift scheduled backups require the cronie.service to be running.
[2026-01-12T11:03:36+0900] [ALPM-SCRIPTLET] Try:
[2026-01-12T11:03:36+0900] [ALPM-SCRIPTLET]   systemctl enable --now cronie.service
[2026-01-12T11:03:36+0900] [ALPM] upgraded tlpui (2:1.9.0-1 -> 2:1.9.0-2)
[2026-01-12T11:03:36+0900] [ALPM] upgraded tree-sitter (0.25.10-1 -> 0.25.10-3)
[2026-01-12T11:03:36+0900] [ALPM] upgraded vim-runtime (9.1.1975-1 -> 9.1.2077-1)
[2026-01-12T11:03:36+0900] [ALPM] upgraded vim (9.1.1975-1 -> 9.1.2077-1)
[2026-01-12T11:03:37+0900] [ALPM] upgraded vulkan-intel (1:25.3.3-1 -> 1:25.3.3-2)
[2026-01-12T11:03:37+0900] [ALPM] upgraded yt-dlp (2025.12.08-1 -> 2025.12.08-2)
[2026-01-12T11:03:37+0900] [ALPM] transaction completed
[2026-01-12T11:03:41+0900] [ALPM] running '20-systemd-sysusers.hook'...
[2026-01-12T11:03:41+0900] [ALPM] running '21-systemd-tmpfiles.hook'...
[2026-01-12T11:03:41+0900] [ALPM] running '25-systemd-hwdb.hook'...
[2026-01-12T11:03:42+0900] [ALPM] running '30-systemd-daemon-reload-system.hook'...
[2026-01-12T11:03:42+0900] [ALPM] running '30-systemd-daemon-reload-user.hook'...
[2026-01-12T11:03:43+0900] [ALPM] running '30-update-mime-database.hook'...
[2026-01-12T11:03:43+0900] [ALPM] running '35-systemd-restart-marked.hook'...
[2026-01-12T11:03:43+0900] [ALPM] running '35-systemd-udev-reload.hook'...
[2026-01-12T11:03:44+0900] [ALPM] running '35-systemd-update.hook'...
[2026-01-12T11:03:44+0900] [ALPM] running '40-update-ca-trust.hook'...
[2026-01-12T11:03:45+0900] [ALPM] running '60-depmod.hook'...
[2026-01-12T11:03:47+0900] [ALPM] running '70-dkms-install.hook'...
[2026-01-12T11:03:47+0900] [ALPM-SCRIPTLET] ==> dkms install --no-depmod xone/0.4.8 -k 6.18.4-arch1-1
[2026-01-12T11:03:54+0900] [ALPM-SCRIPTLET] ==> depmod 6.18.4-arch1-1
[2026-01-12T11:03:57+0900] [ALPM] running '80-cronie.hook'...
[2026-01-12T11:03:57+0900] [ALPM] running '90-mkinitcpio-install.hook'...
[2026-01-12T11:03:58+0900] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2026-01-12T11:03:58+0900] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2026-01-12T11:03:58+0900] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -g /boot/initramfs-linux.img
[2026-01-12T11:03:58+0900] [ALPM-SCRIPTLET] ==> Starting build: '6.18.4-arch1-1'
[2026-01-12T11:03:58+0900] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2026-01-12T11:03:58+0900] [ALPM-SCRIPTLET]   -> Running build hook: [systemd]
[2026-01-12T11:04:00+0900] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2026-01-12T11:04:00+0900] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2026-01-12T11:04:00+0900] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2026-01-12T11:04:00+0900] [ALPM-SCRIPTLET]   -> Running build hook: [kms]
[2026-01-12T11:04:04+0900] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2026-01-12T11:04:04+0900] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2026-01-12T11:04:04+0900] [ALPM-SCRIPTLET]   -> Running build hook: [sd-vconsole]
[2026-01-12T11:04:04+0900] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2026-01-12T11:04:05+0900] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2026-01-12T11:04:05+0900] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2026-01-12T11:04:06+0900] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2026-01-12T11:04:06+0900] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
[2026-01-12T11:04:06+0900] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2026-01-12T11:04:06+0900] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2026-01-12T11:04:06+0900] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2026-01-12T11:04:06+0900] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2026-01-12T11:04:06+0900] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -g /boot/initramfs-linux-fallback.img -S autodetect
[2026-01-12T11:04:06+0900] [ALPM-SCRIPTLET] ==> Starting build: '6.18.4-arch1-1'
[2026-01-12T11:04:06+0900] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2026-01-12T11:04:06+0900] [ALPM-SCRIPTLET]   -> Running build hook: [systemd]
[2026-01-12T11:04:08+0900] [ALPM-SCRIPTLET]   -> Running build hook: [microcode]
[2026-01-12T11:04:08+0900] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2026-01-12T11:04:08+0900] [ALPM-SCRIPTLET]   -> Running build hook: [kms]
[2026-01-12T11:04:11+0900] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'ast'
[2026-01-12T11:04:18+0900] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2026-01-12T11:04:18+0900] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci_renesas'
[2026-01-12T11:04:19+0900] [ALPM-SCRIPTLET]   -> Running build hook: [keymap]
[2026-01-12T11:04:19+0900] [ALPM-SCRIPTLET]   -> Running build hook: [sd-vconsole]
[2026-01-12T11:04:19+0900] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2026-01-12T11:04:19+0900] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'aic94xx'
[2026-01-12T11:04:19+0900] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'wd719x'
[2026-01-12T11:04:20+0900] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qed'
[2026-01-12T11:04:20+0900] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla2xxx'
[2026-01-12T11:04:20+0900] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla1280'
[2026-01-12T11:04:20+0900] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'bfa'
[2026-01-12T11:04:23+0900] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2026-01-12T11:04:24+0900] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2026-01-12T11:04:26+0900] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2026-01-12T11:04:26+0900] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-fallback.img'
[2026-01-12T11:04:28+0900] [ALPM-SCRIPTLET]   -> Early uncompressed CPIO image generation successful
[2026-01-12T11:04:28+0900] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2026-01-12T11:04:28+0900] [ALPM] running 'dbus-reload.hook'...
[2026-01-12T11:04:28+0900] [ALPM] running 'dconf-update.hook'...
[2026-01-12T11:04:28+0900] [ALPM] running 'detect-old-perl-modules.hook'...
[2026-01-12T11:04:29+0900] [ALPM] running 'glib-compile-schemas.hook'...
[2026-01-12T11:04:29+0900] [ALPM] running 'gtk-query-immodules-3.0.hook'...
[2026-01-12T11:04:29+0900] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-01-12T11:04:30+0900] [ALPM] running 'gtk4-querymodules.hook'...
[2026-01-12T11:04:30+0900] [ALPM] running 'texinfo-install.hook'...
[2026-01-12T11:04:32+0900] [ALPM] running 'update-desktop-database.hook'...
[2026-01-12T11:04:32+0900] [ALPM] running 'yaycache-hook.hook'...
[2026-01-12T11:04:32+0900] [ALPM-SCRIPTLET] Removing old installed AUR packages...
[2026-01-12T11:04:32+0900] [ALPM-SCRIPTLET] ==> no candidate packages found for pruning
[2026-01-12T11:04:32+0900] [ALPM-SCRIPTLET] Removing old uninstalled AUR packages...
[2026-01-12T11:04:32+0900] [ALPM-SCRIPTLET] ==> no candidate packages found for pruning
[2026-01-12T11:05:28+0900] [PACMAN] Running 'pacman -Rns kbookmarks kcalendarcore kcmutils kcodecs kcolorscheme kcompletion kconfig kconfigwidgets kcontacts kcoreaddons kcrash kdbusaddons kfilemetadata kglobalaccel kguiaddons ki18n kiconthemes kio kirigami kitemmodels kitemviews'
[2026-01-12T11:05:58+0900] [PACMAN] Running 'pacman -Rns kcolorscheme kconfig kcoreaddons kcrash kdbusaddons kguiaddons kitemviews'
[2026-01-12T11:06:10+0900] [PACMAN] Running 'pacman -Rns knotifications kwallet'
[2026-01-12T11:06:12+0900] [ALPM] transaction started
[2026-01-12T11:06:13+0900] [ALPM] removed kwallet (6.22.0-1)
[2026-01-12T11:06:13+0900] [ALPM] removed qca-qt6 (2.3.10-4)
[2026-01-12T11:06:13+0900] [ALPM] removed kcrash (6.22.0-1)
[2026-01-12T11:06:13+0900] [ALPM] removed kcolorscheme (6.22.0-1)
[2026-01-12T11:06:13+0900] [ALPM] removed kguiaddons (6.22.0-1)
[2026-01-12T11:06:13+0900] [ALPM] removed ki18n (6.22.0-1)
[2026-01-12T11:06:13+0900] [ALPM] removed knotifications (6.22.0-1)
[2026-01-12T11:06:13+0900] [ALPM] removed kconfig (6.22.0-1)
[2026-01-12T11:06:13+0900] [ALPM] transaction completed
[2026-01-12T11:06:13+0900] [ALPM] running '35-systemd-update.hook'...
[2026-01-12T11:06:13+0900] [ALPM] running 'update-desktop-database.hook'...
[2026-01-12T11:06:13+0900] [ALPM] running 'yaycache-hook.hook'...
[2026-01-12T11:06:13+0900] [ALPM-SCRIPTLET] Removing old installed AUR packages...
[2026-01-12T11:06:13+0900] [ALPM-SCRIPTLET] ==> no candidate packages found for pruning
[2026-01-12T11:06:13+0900] [ALPM-SCRIPTLET] Removing old uninstalled AUR packages...
[2026-01-12T11:06:13+0900] [ALPM-SCRIPTLET] ==> no candidate packages found for pruning
[2026-01-12T11:06:24+0900] [PACMAN] Running 'pacman -Rns czkawka-gui-bin-debug libkrun quazip-qt6 xorg-server-xvfb'
[2026-01-12T11:06:25+0900] [ALPM] transaction started
[2026-01-12T11:06:25+0900] [ALPM] removed xorg-server-xvfb (21.1.21-1)
[2026-01-12T11:06:25+0900] [ALPM] removed xorg-xauth (1.1.5-1)
[2026-01-12T11:06:25+0900] [ALPM] removed quazip-qt6 (1.5-1)
[2026-01-12T11:06:25+0900] [ALPM] removed qt6-5compat (6.10.1-1)
[2026-01-12T11:06:25+0900] [ALPM] removed qt6-shadertools (6.10.1-1)
[2026-01-12T11:06:25+0900] [ALPM] removed libkrun (1.16.0-6)
[2026-01-12T11:06:25+0900] [ALPM] removed virglrenderer (1.2.0-1)
[2026-01-12T11:06:25+0900] [ALPM] removed libkrunfw (5.1.0-1)
[2026-01-12T11:06:25+0900] [ALPM] removed czkawka-gui-bin-debug (10.0.0-1)
[2026-01-12T11:06:25+0900] [ALPM] transaction completed
[2026-01-12T11:06:25+0900] [ALPM] running '35-systemd-update.hook'...
[2026-01-12T11:06:25+0900] [ALPM] running 'yaycache-hook.hook'...
[2026-01-12T11:06:25+0900] [ALPM-SCRIPTLET] Removing old installed AUR packages...
[2026-01-12T11:06:25+0900] [ALPM-SCRIPTLET] ==> no candidate packages found for pruning
[2026-01-12T11:06:25+0900] [ALPM-SCRIPTLET] Removing old uninstalled AUR packages...
[2026-01-12T11:06:26+0900] [ALPM-SCRIPTLET] ==> no candidate packages found for pruning

Last edited by Silgrond (Yesterday 15:14:04)

Offline

#16 Yesterday 15:55:19

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,065

Re: [SOLVED] Audio Stopped Working After Update

[2026-01-12T11:03:26+0900] [ALPM] upgraded linux (6.18.3.arch1-1 -> 6.18.4.arch1-1)

but

Does not work with 6.18.3-arch1

if it's not the kernel possibly 

[2026-01-12T11:03:11+0900] [ALPM] upgraded alsa-lib (1.2.15.1-1 -> 1.2.15.2-1)

?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#17 Yesterday 19:51:03

verbatim1711
Member
Registered: 2026-01-11
Posts: 4

Re: [SOLVED] Audio Stopped Working After Update

Sorry @seth shouldn't have written this so late at night haha. The 6.16.2 was a typo.

It was 6.18.2-arch2-1 (working audio) to 6.18.4.arch1-1 (not working audio)

Offline

#18 Yesterday 20:03:22

verbatim1711
Member
Registered: 2026-01-11
Posts: 4

Re: [SOLVED] Audio Stopped Working After Update

I will post my own thread if I attempt to upgrade again so I can provide logs. In the meantime I won't have too much time to tinker so no need to keep the thread open on my account.

Offline

#19 Yesterday 21:16:51

seth
Member
From: Don't DM me only for attention
Registered: 2012-09-03
Posts: 72,065

Re: [SOLVED] Audio Stopped Working After Update

Thanks for the heads-up

@Silgrond does 6.18.2-arch2-1 still work for you?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#20 Yesterday 22:56:47

Silgrond
Member
Registered: 2025-03-20
Posts: 11

Re: [SOLVED] Audio Stopped Working After Update

I have downgraded my alsa-lib and lib32-alsa-lib to 1.2.15.1-1. Still no sound for me. I'll open a different thread as this seems to be solved for OP.

Offline

Pages: 1

Board footer

Powered by FluxBB