You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2026-02-11 11:20:01
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
[solved]High temps, locked EC logic
Hello Again,
Following up on my previous thread where I resolved a "zombie" hibernation state on this HP 247 G8 https://bbs.archlinux.org/viewtopic.php?id=312091 , I am now tackling the thermal logic, from my DSDT I identified the logic where the BIOS holds the fan at a near-passive state until 70°C. I am currently using acpi_osi="Windows 2015" and iommu=pt to maintain system stability, but the "late-onset" fan curve is still causing uncomfortable chassis heat.
I’ve attempted to use nbfc-linux to implement a custom curve, but it’s a dead end:
Writing to EC registers (219/224) triggers a 90D Thermal Panic shutdown.
Even with 143 1 (Manual Mode) set, the EC watchdog trips immediately upon register manipulation.
The Goal I want to achieve
honestly idc about noise or smtg I just want it to be in low temps even if it spins maximum or at least I can control the behavior manually, over all I just want low temps and I tried tlp. power-profile daemon, auto-cpufreq ntg changed the temp behavior, I thought manually overriding fan curve can solve it....
yeah as I said manual overriding backfired so any way to spoof? like BIOS thinks im in 75 and fans kick in? or any kernel params to do? smtg like that?
additional info
-Linux 6.18.8-arch2-1
-The DSDT: https://gist.github.com/5hridhyan/03833 … 6b6647e933
so any ideas? how to do it?
edit:
yeah pretty safely at least not end bricking it 
Last edited by 5hridhyan (2026-02-13 06:39:59)
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
#2 2026-02-11 20:51:31
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 73,420
Re: [solved]High temps, locked EC logic
You're not allowed to leave until you're seen samurai champloo and reported how that you liked it.
Feb 08 08:08:59 Aranya-Marjara kernel: DMI: Hewlett-Packard HP 247 G8 Notebook PC/85E0, BIOS F.68 11/09/2022And I assume there're no fan control settings in the UEFI either?
The DSDT is stock or your edit?
Is the heat coming from the GPU or the CPU? Is it justified? (Ie is the system actually under load - I'm running desktop/office stuff at 28°C on battery and 32°C on AC…)
Can you manually control the fans using https://wiki.archlinux.org/title/Fan_sp … m-sensors) - ie. just have a OS level daemon monitor the temp and control the fans according)
Offline
#3 2026-02-12 11:08:15
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
Re: [solved]High temps, locked EC logic
Thanks for your reply Seth!
sure I'll definitely watch and report back, and even after that I now have no plans to leave.
To answer your questions:
UEFI: It has a "Fan Always On" toggle, but it’s useless. It doesn't actually change the fan floor or the trigger points; the fan still sits idle until the SoC hits the 70°C mark defined in the DSDT.
DSDT: This is the stock DSDT. I haven't attempted a custom override yet
Load/Heat: The heat feels unjustified. I'm hitting 56°C+ just watching YT/ ani-cli or website/taking notes. Interestingly, temps spike to 62°C+ specifically when the battery drops below 20%, which makes me suspect some weird power-management interaction or voltage sag compensation triggering heat.
The EC/BIOS Logic: I suspect the BIOS trusts the fan RPM feedback more than the thermal sensors. When I tried nbfc-linux to force a higher RPM, the EC likely saw a mismatch between the expected "silent" state and the actual high RPM, panicked, and triggered the 90D Thermal Shutdown. It’s essentially a hardware-level watchdog that kills the system if you touch the registers.
Also
PWM: pwmconfig confirms no PWM-capable modules are exposed. The OS has zero direct visibility into the fan.
Platform Profile: /sys/firmware/acpi/platform_profile doesn't exist on this hardware, so I can't even use standard kernel-level thermal shifts.
Clock Speeds: CPU scales between 1.1GHz and 2.1GHz, but never drops to the 500-600MHz range I see reported for similar mobile Ryzens. tlp and auto-cpufreq haven't been able to force it lower.[/
$grep -H . /sys/class/thermal/thermal_zone*/type
grep -H . /sys/class/thermal/thermal_zone*/trip_point_*_temp
/sys/class/thermal/thermal_zone0/type:acpitz
/sys/class/thermal/thermal_zone1/type:acpitz
/sys/class/thermal/thermal_zone0/trip_point_0_temp:125000
/sys/class/thermal/thermal_zone0/trip_point_1_temp:104000
/sys/class/thermal/thermal_zone0/trip_point_2_temp:104000
/sys/class/thermal/thermal_zone0/trip_point_3_temp:70000
it started after I fixed hibernation issue so I suspected it first but no, likely I got a "momentum"
└─$ cat /proc/cmdline
BOOT_IMAGE=/vmlinuz-linux root=UUID=c0ae4a73-5088-4f7e-b497-ca1a4baa4dbe rw rootflags=subvol=@ cryptdevice=UUID=63984f23-816d-48d8-9493-119bf15c9a26:root zswap.enabled=0 rootfstype=btrfs loglevel=3 amdgpu.dpm=1 lsm=landlock,lockdown,yama,apparmor,bpf apparmor=1 security=apparmor iommu=pt amdgpu.noretry=0 pcie_aspm=off amdgpu.gpu_recovery=1 amdgpu.dcfeaturemask=0x8 "acpi_osi=Windows 2015" resume=UUID=c0ae4a73-5088-4f7e-b497-ca1a4baa4dbe resume_offset=17423426if any one param is also slightly changed or removed, boom! TLB flush errors + hibernation fails the same zombie behavior and also sometime I have to hope even REISUB to work also sometimes it doesn't work have to force shutdown no choice
-and speaker/audio glitches like even the sound number change to 100 but sound is like 20 or 15, yes I was facing that before but usually when I restart services it would usually fix it but now if that happens as I restarted; no audio output at all, likely in a weird state after each boot, which also the same time GPU or Hyprland kinda weird it either hangs or laggy behavior, waybar completely froze even tried to restart that but no, frame drops at either one need to restart whole laptop, yeah sorry I might be stacking up every issue's in one thread... but this is what I'm facing
edit:
I really tried to reduce boost of it "amd_pstate=active" it doesn't apply at all
tried cpupower
also limiting max freq,
I just want my palms to be cool no matter noise or smtg....
my usage:
- I don't play any game except that chrome dinosaur when power cut
-YT @ 480p or @720p
-website for notes and all
-VScode
-smooth hyprland experience
that's it and ntg else.....
and I expect a reliable behavior not every time fearing "oh no low battery, CHARGER!!" or "Ahh my palm feels hot" or "tomorrow I have exam please audio just work this time"
idk what to do, I think my laptop is hostile and my laptop thinks I'm hostile
edit2:
Quick update: Ran memtest86+ (2 passes, 0 errors), so the RAM is physically fine. I think the TLB flush errors are purely logic/firmware-based, although as long as I have those params I don't face that.....
Last edited by 5hridhyan (2026-02-13 18:20:15)
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
#4 2026-02-12 15:24:51
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 73,420
Re: [solved]High temps, locked EC logic
The heat feels unjustified. I'm hitting 56°C+ just watching YT/ ani-cli or website/taking notes.
Check top & powertop for what's consuming the most CPU and likewise amdgpu_top
Also make sure you're not somehow running software GL ("glxinfo -B" and your xorg log if this is X11) and "vainfo" and "mpv -v" to see whether you're decoding in HW
If the fans are BIOS controlled (and since you mentioned), do they behave any different on Ubuntu/Windows??
Offline
#5 2026-02-12 15:34:00
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
Re: [solved]High temps, locked EC logic
do they behave any different on Ubuntu/Windows??
I'll try to explain, in Arch or Ubuntu if the temp hits 65 or 70 I hear a certain RPM of fans and the same or similar RPM sound of fans hit in windows and task manager shows 47 or 48 so I cannot comment or clarify about temp behavior or fan behavior, I feel windows is not trustworthy for any data likely shows OEM/vendor calculated logic/data/numbers like when I first bought this laptop it literally showed "255 G8" instead of "247 G8", it's either fans ramp up at 45 like that or it is showing fake temperature, as much I observed before jumping back to arch....
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ glxinfo -B
name of display: :1
display: :1 screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
Vendor: AMD (0x1002)
Device: AMD Radeon Vega 8 Graphics (radeonsi, raven, ACO, DRM 3.64, 6.18.9-arch1-2) (0x15d8)
Version: 25.3.5
Accelerated: yes
Video memory: 2048MB
Unified memory: no
Preferred profile: core (0x1)
Max core profile version: 4.6
Max compat profile version: 4.6
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.2
Memory info (GL_ATI_meminfo):
VBO free memory - total: 1401 MB, largest block: 1401 MB
VBO free aux. memory - total: 2791 MB, largest block: 2791 MB
Texture free memory - total: 1401 MB, largest block: 1401 MB
Texture free aux. memory - total: 2791 MB, largest block: 2791 MB
Renderbuffer free memory - total: 1401 MB, largest block: 1401 MB
Renderbuffer free aux. memory - total: 2791 MB, largest block: 2791 MB
Memory info (GL_NVX_gpu_memory_info):
Dedicated video memory: 2048 MB
Total available memory: 4962 MB
Currently available dedicated video memory: 1401 MB
OpenGL vendor string: AMD
OpenGL renderer string: AMD Radeon Vega 8 Graphics (radeonsi, raven, ACO, DRM 3.64, 6.18.9-arch1-2)
OpenGL core profile version string: 4.6 (Core Profile) Mesa 25.3.5-arch1.1
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 4.6 (Compatibility Profile) Mesa 25.3.5-arch1.1
OpenGL shading language version string: 4.60
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 25.3.5-arch1.1
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ vainfo
Trying display: wayland
vainfo: VA-API version: 1.22 (libva 2.22.0)
vainfo: Driver version: Mesa Gallium driver 25.3.5-arch1.1 for AMD Radeon Vega 8 Graphics (radeonsi, raven, ACO, DRM 3.64, 6.18.9-arch1-2)
vainfo: Supported profile and entrypoints
VAProfileMPEG2Simple : VAEntrypointVLD
VAProfileMPEG2Main : VAEntrypointVLD
VAProfileVC1Simple : VAEntrypointVLD
VAProfileVC1Main : VAEntrypointVLD
VAProfileVC1Advanced : VAEntrypointVLD
VAProfileH264ConstrainedBaseline: VAEntrypointVLD
VAProfileH264ConstrainedBaseline: VAEntrypointEncSlice
VAProfileH264Main : VAEntrypointVLD
VAProfileH264Main : VAEntrypointEncSlice
VAProfileH264High : VAEntrypointVLD
VAProfileH264High : VAEntrypointEncSlice
VAProfileHEVCMain : VAEntrypointVLD
VAProfileHEVCMain : VAEntrypointEncSlice
VAProfileHEVCMain10 : VAEntrypointVLD
VAProfileJPEGBaseline : VAEntrypointVLD
VAProfileVP9Profile0 : VAEntrypointVLD
VAProfileVP9Profile2 : VAEntrypointVLD
VAProfileNone : VAEntrypointVideoProcI'l play smtg in MPV and report back....
Last edited by 5hridhyan (2026-02-12 15:36:39)
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
#6 2026-02-12 15:47:24
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 73,420
Re: [solved]High temps, locked EC logic
GL and vaapi seem fine, make sure it's not the wayland compositor, test the temperature/load situation on X11/openbox
Another thing I forgot: what's the battery discharge rate / watts?
If the system is heating up on 3W there's more likely some problem w/ the overall heat management (D.U.S.T.?)
Offline
#7 2026-02-12 15:52:22
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
Re: [solved]High temps, locked EC logic
yes I'll test and report back....
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
#8 2026-02-12 15:58:22
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 73,420
Re: [solved]High temps, locked EC logic
5.1W should™ not be able to heat up the system… any chance there's an issue w/ the heat-pipe (or the system being clogged up in gunk and dust)?
Offline
#9 2026-02-12 16:25:56
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
Re: [solved]High temps, locked EC logic
Yeah I tried openbox but unfortunately it didn;t launch at all... had to REISUB again and after booting WIFI 5Ghz completely stopped showing
it's like try to fix one get two breakage for free....
and yeah you are right maybe dust colgged; so I have to take to a technician and clean + re-apply thermal paste likely....
this system has very unstable in behavior 
Last edited by 5hridhyan (2026-02-12 16:30:38)
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
#10 2026-02-12 16:37:39
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 73,420
Re: [solved]High temps, locked EC logic
Test some live distro for temperature behavior and stability, but if the discharge rate isn't misreported or you were looking at an isolated irrelevant value at no load (but playing a video ramps it up to 20W) the system should not be able to heat up.
Something that's contradicting the dust theory however is that the case gets hot to the touch - that means the heat does rise to the surface.
didn;t launch at all... had to REISUB
Do you have an xorg log from that attempt?
Offline
#11 2026-02-12 16:43:37
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
Re: [solved]High temps, locked EC logic
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /var/log/Xorg.0.log
[ 35.180] (--) Log file renamed from "/var/log/Xorg.pid-1222.log" to "/var/log/Xorg.0.log"
[ 35.182]
X.Org X Server 1.21.1.21
X Protocol Version 11, Revision 0
[ 35.182] Current Operating System: Linux Aranya-Marjara 6.18.9-arch1-2 #1 SMP PREEMPT_DYNAMIC Mon, 09 Feb 2026 17:16:33 +0000 x86_64
[ 35.183] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c0ae4a73-5088-4f7e-b497-ca1a4baa4dbe rw rootflags=subvol=@ cryptdevice=UUID=63984f23-816d-48d8-9493-119bf15c9a26:root zswap.enabled=0 rootfstype=btrfs loglevel=3 amdgpu.dpm=1 lsm=landlock,lockdown,yama,apparmor,bpf apparmor=1 security=apparmor iommu=pt amdgpu.noretry=0 pcie_aspm=off amdgpu.gpu_recovery=1 amdgpu.dcfeaturemask=0x8 "acpi_osi=Windows 2015" resume=UUID=c0ae4a73-5088-4f7e-b497-ca1a4baa4dbe resume_offset=17423426
[ 35.183]
[ 35.183] Current version of pixman: 0.46.4
[ 35.183] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 35.183] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 35.183] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 12 21:37:40 2026
[ 35.185] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 35.185] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 35.185] (==) No Layout section. Using the first Screen section.
[ 35.185] (==) No screen section available. Using defaults.
[ 35.185] (**) |-->Screen "Default Screen Section" (0)
[ 35.185] (**) | |-->Monitor "<default monitor>"
[ 35.186] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 35.186] (**) Allowing byte-swapped clients
[ 35.186] (==) Automatically adding devices
[ 35.186] (==) Automatically enabling devices
[ 35.186] (==) Automatically adding GPU devices
[ 35.186] (==) Automatically binding GPU devices
[ 35.186] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 35.186] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 35.186] Entry deleted from font path.
[ 35.187] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 35.187] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 35.187] Entry deleted from font path.
[ 35.187] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 35.188] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF".
[ 35.188] Entry deleted from font path.
[ 35.188] (Run 'mkfontdir' on "/usr/share/fonts/OTF").
[ 35.188] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 35.188] Entry deleted from font path.
[ 35.188] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 35.188] Entry deleted from font path.
[ 35.188] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 35.188] Entry deleted from font path.
[ 35.188] (==) FontPath set to:
[ 35.188] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 35.188] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 35.188] (II) Module ABI versions:
[ 35.188] X.Org ANSI C Emulation: 0.4
[ 35.188] X.Org Video Driver: 25.2
[ 35.188] X.Org XInput driver : 24.4
[ 35.188] X.Org Server Extension : 10.0
[ 35.188] (++) using VT number 2
[ 35.188] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 35.190] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 35.190] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:04:00.0/drm/card1
[ 35.212] (--) PCI:*(4@0:0:0) 1002:15d8:103c:85e0 rev 194, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfcb00000/524288, I/O @ 0x0000d000/256
[ 35.212] (II) LoadModule: "glx"
[ 35.213] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 35.228] (II) Module glx: vendor="X.Org Foundation"
[ 35.228] compiled for 1.21.1.21, module version = 1.0.0
[ 35.229] ABI class: X.Org Server Extension, version 10.0
[ 35.229] (==) Matched ati as autoconfigured driver 0
[ 35.229] (==) Matched modesetting as autoconfigured driver 1
[ 35.229] (==) Matched fbdev as autoconfigured driver 2
[ 35.229] (==) Matched vesa as autoconfigured driver 3
[ 35.229] (==) Assigned the driver to the xf86ConfigLayout
[ 35.229] (II) LoadModule: "ati"
[ 35.229] (WW) Warning, couldn't open module ati
[ 35.229] (EE) Failed to load module "ati" (module does not exist, 0)
[ 35.229] (II) LoadModule: "modesetting"
[ 35.230] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 35.233] (II) Module modesetting: vendor="X.Org Foundation"
[ 35.233] compiled for 1.21.1.21, module version = 1.21.1
[ 35.233] Module class: X.Org Video Driver
[ 35.233] ABI class: X.Org Video Driver, version 25.2
[ 35.233] (II) LoadModule: "fbdev"
[ 35.233] (WW) Warning, couldn't open module fbdev
[ 35.233] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 35.233] (II) LoadModule: "vesa"
[ 35.234] (WW) Warning, couldn't open module vesa
[ 35.234] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 35.234] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 35.271] (II) modeset(0): using drv /dev/dri/card1
[ 35.272] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 35.272] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 35.272] (==) modeset(0): RGB weight 888
[ 35.272] (==) modeset(0): Default visual is TrueColor
[ 35.272] (II) Loading sub module "glamoregl"
[ 35.272] (II) LoadModule: "glamoregl"
[ 35.273] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 35.286] (II) Module glamoregl: vendor="X.Org Foundation"
[ 35.286] compiled for 1.21.1.21, module version = 1.0.1
[ 35.286] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.005] (II) modeset(0): glamor: Using OpenGL 4.6 context.
[ 36.005] (II) modeset(0): glamor X acceleration enabled on AMD Radeon Vega 8 Graphics (radeonsi, raven, ACO, DRM 3.64, 6.18.9-arch1-2)
[ 36.005] (II) modeset(0): glamor initialized
[ 36.005] (==) modeset(0): VariableRefresh: disabled
[ 36.005] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 36.007] (II) modeset(0): Output eDP-1 has no monitor section
[ 36.007] (II) modeset(0): Output HDMI-1 has no monitor section
[ 36.008] (II) modeset(0): Output DP-1 has no monitor section
[ 36.010] (II) modeset(0): EDID for output eDP-1
[ 36.010] (II) modeset(0): Manufacturer: BOE Model: 92c Serial#: 0
[ 36.010] (II) modeset(0): Year: 2020 Week: 11
[ 36.010] (II) modeset(0): EDID Version: 1.4
[ 36.010] (II) modeset(0): Digital Display Input
[ 36.010] (II) modeset(0): 6 bits per channel
[ 36.010] (II) modeset(0): Digital interface is DisplayPort
[ 36.010] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 36.010] (II) modeset(0): Gamma: 2.20
[ 36.010] (II) modeset(0): No DPMS capabilities specified
[ 36.010] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 36.010] (II) modeset(0): First detailed timing is preferred mode
[ 36.010] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 36.010] (II) modeset(0): Display is continuous-frequency
[ 36.010] (II) modeset(0): redX: 0.589 redY: 0.343 greenX: 0.330 greenY: 0.570
[ 36.010] (II) modeset(0): blueX: 0.157 blueY: 0.137 whiteX: 0.313 whiteY: 0.329
[ 36.010] (II) modeset(0): Manufacturer's mask: 0
[ 36.011] (II) modeset(0): Supported detailed timing:
[ 36.011] (II) modeset(0): clock: 78.4 MHz Image Size: 309 x 174 mm
[ 36.011] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1588 h_border: 0
[ 36.011] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 823 v_border: 0
[ 36.011] (II) modeset(0): Supported detailed timing:
[ 36.011] (II) modeset(0): clock: 52.3 MHz Image Size: 309 x 174 mm
[ 36.011] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1588 h_border: 0
[ 36.011] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 823 v_border: 0
[ 36.011] (II) modeset(0): Unknown vendor-specific block 2
[ 36.011] (II) modeset(0): EDID (in hex):
[ 36.011] (II) modeset(0): 00ffffffffffff0009e52c0900000000
[ 36.011] (II) modeset(0): 0b1e0104951f117803f8459657549228
[ 36.011] (II) modeset(0): 23505400000001010101010101010101
[ 36.011] (II) modeset(0): 010101010101a21e56de500037303020
[ 36.011] (II) modeset(0): 360035ae1000001a6c1456de50003730
[ 36.011] (II) modeset(0): 3020360035ae1000001a000000000000
[ 36.011] (II) modeset(0): 00000000000000000000000000000002
[ 36.011] (II) modeset(0): 000d40ff0a3c7d1111217d0000000059
[ 36.011] (II) modeset(0): Printing probed modes for output eDP-1
[ 36.011] (II) modeset(0): Modeline "1366x768"x60.0 78.42 1366 1414 1446 1588 768 771 777 823 +hsync -vsync (49.4 kHz eP)
[ 36.011] (II) modeset(0): Modeline "1366x768"x40.0 52.28 1366 1414 1446 1588 768 771 777 823 +hsync -vsync (32.9 kHz e)
[ 36.011] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 36.011] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 36.011] (II) modeset(0): Modeline "1280x720"x60.0 78.42 1280 1414 1446 1588 720 771 777 823 +hsync -vsync (49.4 kHz e)
[ 36.011] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 36.011] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 36.011] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 36.011] (II) modeset(0): Modeline "1024x768"x60.0 78.42 1024 1414 1446 1588 768 771 777 823 +hsync -vsync (49.4 kHz e)
[ 36.011] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 36.011] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 36.011] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 36.011] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 36.011] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 36.011] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 36.011] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 36.011] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 36.011] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 36.011] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 36.012] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 36.012] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 36.012] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 36.012] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 36.012] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 36.012] (II) modeset(0): Modeline "800x600"x60.0 78.42 800 1414 1446 1588 600 771 777 823 +hsync -vsync (49.4 kHz e)
[ 36.012] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 36.012] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 36.012] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 36.012] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 36.012] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 36.012] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 36.012] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 36.012] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 36.012] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 36.012] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 36.012] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 36.012] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 36.012] (II) modeset(0): Modeline "640x480"x60.0 78.42 640 1414 1446 1588 480 771 777 823 +hsync -vsync (49.4 kHz e)
[ 36.012] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 36.012] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 36.012] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 36.012] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 36.012] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 36.012] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 36.012] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 36.012] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 36.012] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 36.012] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 36.012] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 36.012] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 36.012] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 36.012] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 36.012] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 36.012] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 36.012] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 36.012] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 36.012] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 36.012] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 36.012] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 36.012] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 36.012] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 36.012] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 36.012] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 36.012] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 36.012] (II) modeset(0): EDID for output HDMI-1
[ 36.012] (II) modeset(0): EDID for output DP-1
[ 36.012] (II) modeset(0): Output eDP-1 connected
[ 36.012] (II) modeset(0): Output HDMI-1 disconnected
[ 36.012] (II) modeset(0): Output DP-1 disconnected
[ 36.012] (II) modeset(0): Using exact sizes for initial modes
[ 36.012] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[ 36.012] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 36.012] (==) modeset(0): DPI set to (96, 96)
[ 36.012] (II) Loading sub module "fb"
[ 36.012] (II) LoadModule: "fb"
[ 36.012] (II) Module "fb" already built-in
[ 36.068] (==) modeset(0): Backing store enabled
[ 36.068] (==) modeset(0): Silken mouse enabled
[ 36.070] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 36.070] (==) modeset(0): DPMS enabled
[ 36.070] (II) modeset(0): [DRI2] Setup complete
[ 36.070] (II) modeset(0): [DRI2] DRI driver: radeonsi
[ 36.070] (II) modeset(0): [DRI2] VDPAU driver: radeonsi
[ 36.070] (II) Initializing extension Generic Event Extension
[ 36.071] (II) Initializing extension SHAPE
[ 36.071] (II) Initializing extension MIT-SHM
[ 36.071] (II) Initializing extension XInputExtension
[ 36.071] (II) Initializing extension XTEST
[ 36.071] (II) Initializing extension BIG-REQUESTS
[ 36.071] (II) Initializing extension SYNC
[ 36.072] (II) Initializing extension XKEYBOARD
[ 36.072] (II) Initializing extension XC-MISC
[ 36.072] (II) Initializing extension SECURITY
[ 36.072] (II) Initializing extension XFIXES
[ 36.072] (II) Initializing extension RENDER
[ 36.072] (II) Initializing extension RANDR
[ 36.073] (II) Initializing extension COMPOSITE
[ 36.073] (II) Initializing extension DAMAGE
[ 36.073] (II) Initializing extension MIT-SCREEN-SAVER
[ 36.073] (II) Initializing extension DOUBLE-BUFFER
[ 36.073] (II) Initializing extension RECORD
[ 36.073] (II) Initializing extension DPMS
[ 36.074] (II) Initializing extension Present
[ 36.074] (II) Initializing extension DRI3
[ 36.074] (II) Initializing extension X-Resource
[ 36.074] (II) Initializing extension XVideo
[ 36.074] (II) Initializing extension XVideo-MotionCompensation
[ 36.074] (II) Initializing extension GLX
[ 36.095] (II) AIGLX: Loaded and initialized radeonsi
[ 36.095] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 36.095] (II) Initializing extension XFree86-VidModeExtension
[ 36.095] (II) Initializing extension XFree86-DGA
[ 36.096] (II) Initializing extension XFree86-DRI
[ 36.096] (II) Initializing extension DRI2
[ 36.096] (II) modeset(0): Damage tracking initialized
[ 36.097] (II) modeset(0): Setting screen physical size to 361 x 203
[ 36.226] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 36.226] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 36.226] (**) Power Button: Applying InputClass "system-keyboard"
[ 36.226] (II) LoadModule: "libinput"
[ 36.226] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 36.237] (II) Module libinput: vendor="X.Org Foundation"
[ 36.237] compiled for 1.21.1.13, module version = 1.5.0
[ 36.237] Module class: X.Org XInput Driver
[ 36.237] ABI class: X.Org XInput driver, version 24.4
[ 36.237] (II) Using input driver 'libinput' for 'Power Button'
[ 36.237] (**) Power Button: always reports core events
[ 36.237] (**) Option "Device" "/dev/input/event2"
[ 36.246] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 36.247] (II) event2 - Power Button: device is a keyboard
[ 36.247] (II) event2 - Power Button: device removed
[ 36.254] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 36.254] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 36.254] (**) Option "xkb_model" "pc105+inet"
[ 36.254] (**) Option "xkb_layout" "us"
[ 36.254] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 36.299] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 36.299] (II) event2 - Power Button: device is a keyboard
[ 36.301] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 36.301] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 36.301] (**) Video Bus: Applying InputClass "system-keyboard"
[ 36.301] (II) Using input driver 'libinput' for 'Video Bus'
[ 36.301] (**) Video Bus: always reports core events
[ 36.301] (**) Option "Device" "/dev/input/event4"
[ 36.303] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 36.303] (II) event4 - Video Bus: device is a keyboard
[ 36.303] (II) event4 - Video Bus: device removed
[ 36.328] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:00/input/input4/event4"
[ 36.328] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 36.328] (**) Option "xkb_model" "pc105+inet"
[ 36.328] (**) Option "xkb_layout" "us"
[ 36.328] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 36.330] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 36.330] (II) event4 - Video Bus: device is a keyboard
[ 36.332] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 36.332] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 36.332] (**) Power Button: Applying InputClass "system-keyboard"
[ 36.332] (II) Using input driver 'libinput' for 'Power Button'
[ 36.332] (**) Power Button: always reports core events
[ 36.332] (**) Option "Device" "/dev/input/event0"
[ 36.333] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 36.333] (II) event0 - Power Button: device is a keyboard
[ 36.334] (II) event0 - Power Button: device removed
[ 36.344] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 36.344] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 36.344] (**) Option "xkb_model" "pc105+inet"
[ 36.344] (**) Option "xkb_layout" "us"
[ 36.344] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 36.346] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 36.347] (II) event0 - Power Button: device is a keyboard
[ 36.348] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 36.348] (II) No input driver specified, ignoring this device.
[ 36.348] (II) This device may have been added with another device file.
[ 36.350] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event10)
[ 36.350] (II) No input driver specified, ignoring this device.
[ 36.350] (II) This device may have been added with another device file.
[ 36.351] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event11)
[ 36.351] (II) No input driver specified, ignoring this device.
[ 36.351] (II) This device may have been added with another device file.
[ 36.352] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event12)
[ 36.352] (II) No input driver specified, ignoring this device.
[ 36.352] (II) This device may have been added with another device file.
[ 36.354] (II) config/udev: Adding input device ELAN0708:00 04F3:30A0 Mouse (/dev/input/event6)
[ 36.354] (**) ELAN0708:00 04F3:30A0 Mouse: Applying InputClass "libinput pointer catchall"
[ 36.354] (II) Using input driver 'libinput' for 'ELAN0708:00 04F3:30A0 Mouse'
[ 36.354] (**) ELAN0708:00 04F3:30A0 Mouse: always reports core events
[ 36.354] (**) Option "Device" "/dev/input/event6"
[ 36.359] (II) event6 - ELAN0708:00 04F3:30A0 Mouse: is tagged by udev as: Mouse
[ 36.359] (II) event6 - ELAN0708:00 04F3:30A0 Mouse: device is a pointer
[ 36.359] (II) event6 - ELAN0708:00 04F3:30A0 Mouse: device removed
[ 36.384] (II) libinput: ELAN0708:00 04F3:30A0 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 36.384] (II) libinput: ELAN0708:00 04F3:30A0 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 36.384] (II) libinput: ELAN0708:00 04F3:30A0 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 36.384] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:01/i2c-0/i2c-ELAN0708:00/0018:04F3:30A0.0001/input/input11/event6"
[ 36.384] (II) XINPUT: Adding extended input device "ELAN0708:00 04F3:30A0 Mouse" (type: MOUSE, id 9)
[ 36.384] (**) Option "AccelerationScheme" "none"
[ 36.384] (**) ELAN0708:00 04F3:30A0 Mouse: (accel) selected scheme none/0
[ 36.384] (**) ELAN0708:00 04F3:30A0 Mouse: (accel) acceleration factor: 2.000
[ 36.384] (**) ELAN0708:00 04F3:30A0 Mouse: (accel) acceleration threshold: 4
[ 36.388] (II) event6 - ELAN0708:00 04F3:30A0 Mouse: is tagged by udev as: Mouse
[ 36.388] (II) event6 - ELAN0708:00 04F3:30A0 Mouse: device is a pointer
[ 36.390] (II) config/udev: Adding input device ELAN0708:00 04F3:30A0 Mouse (/dev/input/mouse0)
[ 36.390] (II) No input driver specified, ignoring this device.
[ 36.390] (II) This device may have been added with another device file.
[ 36.392] (II) config/udev: Adding input device ELAN0708:00 04F3:30A0 Touchpad (/dev/input/event7)
[ 36.392] (**) ELAN0708:00 04F3:30A0 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 36.392] (II) Using input driver 'libinput' for 'ELAN0708:00 04F3:30A0 Touchpad'
[ 36.392] (**) ELAN0708:00 04F3:30A0 Touchpad: always reports core events
[ 36.392] (**) Option "Device" "/dev/input/event7"
[ 36.394] (II) event7 - ELAN0708:00 04F3:30A0 Touchpad: is tagged by udev as: Touchpad
[ 36.397] (II) event7 - ELAN0708:00 04F3:30A0 Touchpad: device is a touchpad
[ 36.397] (II) event7 - ELAN0708:00 04F3:30A0 Touchpad: device removed
[ 36.421] (II) libinput: ELAN0708:00 04F3:30A0 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 36.421] (II) libinput: ELAN0708:00 04F3:30A0 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 36.421] (II) libinput: ELAN0708:00 04F3:30A0 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 36.422] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:01/i2c-0/i2c-ELAN0708:00/0018:04F3:30A0.0001/input/input13/event7"
[ 36.422] (II) XINPUT: Adding extended input device "ELAN0708:00 04F3:30A0 Touchpad" (type: TOUCHPAD, id 10)
[ 36.424] (**) Option "AccelerationScheme" "none"
[ 36.424] (**) ELAN0708:00 04F3:30A0 Touchpad: (accel) selected scheme none/0
[ 36.424] (**) ELAN0708:00 04F3:30A0 Touchpad: (accel) acceleration factor: 2.000
[ 36.424] (**) ELAN0708:00 04F3:30A0 Touchpad: (accel) acceleration threshold: 4
[ 36.427] (II) event7 - ELAN0708:00 04F3:30A0 Touchpad: is tagged by udev as: Touchpad
[ 36.430] (II) event7 - ELAN0708:00 04F3:30A0 Touchpad: device is a touchpad
[ 36.432] (II) config/udev: Adding input device ELAN0708:00 04F3:30A0 Touchpad (/dev/input/mouse1)
[ 36.432] (II) No input driver specified, ignoring this device.
[ 36.432] (II) This device may have been added with another device file.
[ 36.433] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 36.433] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 36.433] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 36.433] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 36.433] (**) AT Translated Set 2 keyboard: always reports core events
[ 36.433] (**) Option "Device" "/dev/input/event3"
[ 36.435] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 36.435] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 36.436] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 36.446] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 36.446] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 36.446] (**) Option "xkb_model" "pc105+inet"
[ 36.446] (**) Option "xkb_layout" "us"
[ 36.446] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 36.448] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 36.448] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 36.450] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 36.450] (II) No input driver specified, ignoring this device.
[ 36.450] (II) This device may have been added with another device file.
[ 36.457] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[ 36.457] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 36.457] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[ 36.457] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 36.457] (**) HP WMI hotkeys: always reports core events
[ 36.457] (**) Option "Device" "/dev/input/event9"
[ 36.458] (II) event9 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 36.458] (II) event9 - HP WMI hotkeys: device is a keyboard
[ 36.459] (II) event9 - HP WMI hotkeys: device removed
[ 36.472] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event9"
[ 36.472] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[ 36.472] (**) Option "xkb_model" "pc105+inet"
[ 36.472] (**) Option "xkb_layout" "us"
[ 36.472] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 36.473] (II) event9 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 36.474] (II) event9 - HP WMI hotkeys: device is a keyboard
[ 36.475] (II) config/udev: Adding input device Wireless hotkeys (/dev/input/event5)
[ 36.475] (**) Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[ 36.475] (**) Wireless hotkeys: Applying InputClass "system-keyboard"
[ 36.475] (II) Using input driver 'libinput' for 'Wireless hotkeys'
[ 36.475] (**) Wireless hotkeys: always reports core events
[ 36.475] (**) Option "Device" "/dev/input/event5"
[ 36.476] (II) event5 - Wireless hotkeys: is tagged by udev as: Keyboard
[ 36.476] (II) event5 - Wireless hotkeys: device is a keyboard
[ 36.476] (II) event5 - Wireless hotkeys: device removed
[ 36.504] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 36.504] (II) XINPUT: Adding extended input device "Wireless hotkeys" (type: KEYBOARD, id 13)
[ 36.504] (**) Option "xkb_model" "pc105+inet"
[ 36.504] (**) Option "xkb_layout" "us"
[ 36.504] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 36.506] (II) event5 - Wireless hotkeys: is tagged by udev as: Keyboard
[ 36.506] (II) event5 - Wireless hotkeys: device is a keyboard
[ 36.526] (II) modeset(0): Disabling kernel dirty updates, not required.
[ 36.628] (II) modeset(0): EDID vendor "BOE", prod id 2348
[ 36.628] (II) modeset(0): Printing DDC gathered Modelines:
[ 36.628] (II) modeset(0): Modeline "1366x768"x0.0 78.42 1366 1414 1446 1588 768 771 777 823 +hsync -vsync (49.4 kHz eP)
[ 36.628] (II) modeset(0): Modeline "1366x768"x0.0 52.28 1366 1414 1446 1588 768 771 777 823 +hsync -vsync (32.9 kHz e)
[ 49.621] (II) modeset(0): EDID vendor "BOE", prod id 2348
[ 49.621] (II) modeset(0): Printing DDC gathered Modelines:
[ 49.621] (II) modeset(0): Modeline "1366x768"x0.0 78.42 1366 1414 1446 1588 768 771 777 823 +hsync -vsync (49.4 kHz eP)
[ 49.621] (II) modeset(0): Modeline "1366x768"x0.0 52.28 1366 1414 1446 1588 768 771 777 823 +hsync -vsync (32.9 kHz e)
[ 50.066] (II) event2 - Power Button: device removed
[ 50.074] (II) event4 - Video Bus: device removed
[ 50.087] (II) event0 - Power Button: device removed
[ 50.100] (II) event6 - ELAN0708:00 04F3:30A0 Mouse: device removed
[ 50.123] (II) event7 - ELAN0708:00 04F3:30A0 Touchpad: device removed
[ 50.139] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 50.147] (II) event9 - HP WMI hotkeys: device removed
[ 50.159] (II) event5 - Wireless hotkeys: device removed
[ 50.172] (II) AIGLX: Suspending AIGLX clients for VT switch
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /var/log/Xorg.0.log.old
[ 39.737] (--) Log file renamed from "/var/log/Xorg.pid-1222.log" to "/var/log/Xorg.0.log"
[ 39.739]
X.Org X Server 1.21.1.21
X Protocol Version 11, Revision 0
[ 39.739] Current Operating System: Linux Aranya-Marjara 6.18.9-arch1-2 #1 SMP PREEMPT_DYNAMIC Mon, 09 Feb 2026 17:16:33 +0000 x86_64
[ 39.739] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c0ae4a73-5088-4f7e-b497-ca1a4baa4dbe rw rootflags=subvol=@ cryptdevice=UUID=63984f23-816d-48d8-9493-119bf15c9a26:root zswap.enabled=0 rootfstype=btrfs loglevel=3 amdgpu.dpm=1 lsm=landlock,lockdown,yama,apparmor,bpf apparmor=1 security=apparmor iommu=pt amdgpu.noretry=0 pcie_aspm=off amdgpu.gpu_recovery=1 amdgpu.dcfeaturemask=0x8 "acpi_osi=Windows 2015" resume=UUID=c0ae4a73-5088-4f7e-b497-ca1a4baa4dbe resume_offset=17423426
[ 39.739]
[ 39.739] Current version of pixman: 0.46.4
[ 39.739] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 39.739] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 39.739] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 12 21:33:24 2026
[ 39.740] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 39.740] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 39.741] (==) No Layout section. Using the first Screen section.
[ 39.741] (==) No screen section available. Using defaults.
[ 39.741] (**) |-->Screen "Default Screen Section" (0)
[ 39.741] (**) | |-->Monitor "<default monitor>"
[ 39.741] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 39.741] (**) Allowing byte-swapped clients
[ 39.741] (==) Automatically adding devices
[ 39.741] (==) Automatically enabling devices
[ 39.741] (==) Automatically adding GPU devices
[ 39.741] (==) Automatically binding GPU devices
[ 39.741] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 39.742] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 39.742] Entry deleted from font path.
[ 39.742] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 39.742] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 39.742] Entry deleted from font path.
[ 39.743] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 39.743] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF".
[ 39.743] Entry deleted from font path.
[ 39.743] (Run 'mkfontdir' on "/usr/share/fonts/OTF").
[ 39.743] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 39.743] Entry deleted from font path.
[ 39.743] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 39.743] Entry deleted from font path.
[ 39.743] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 39.743] Entry deleted from font path.
[ 39.743] (==) FontPath set to:
[ 39.743] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 39.743] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 39.743] (II) Module ABI versions:
[ 39.743] X.Org ANSI C Emulation: 0.4
[ 39.743] X.Org Video Driver: 25.2
[ 39.743] X.Org XInput driver : 24.4
[ 39.743] X.Org Server Extension : 10.0
[ 39.744] (++) using VT number 2
[ 39.744] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 39.746] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 39.746] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:04:00.0/drm/card1
[ 39.766] (--) PCI:*(4@0:0:0) 1002:15d8:103c:85e0 rev 194, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfcb00000/524288, I/O @ 0x0000d000/256
[ 39.767] (II) LoadModule: "glx"
[ 39.767] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 39.781] (II) Module glx: vendor="X.Org Foundation"
[ 39.781] compiled for 1.21.1.21, module version = 1.0.0
[ 39.781] ABI class: X.Org Server Extension, version 10.0
[ 39.781] (==) Matched ati as autoconfigured driver 0
[ 39.781] (==) Matched modesetting as autoconfigured driver 1
[ 39.781] (==) Matched fbdev as autoconfigured driver 2
[ 39.781] (==) Matched vesa as autoconfigured driver 3
[ 39.781] (==) Assigned the driver to the xf86ConfigLayout
[ 39.781] (II) LoadModule: "ati"
[ 39.781] (WW) Warning, couldn't open module ati
[ 39.781] (EE) Failed to load module "ati" (module does not exist, 0)
[ 39.782] (II) LoadModule: "modesetting"
[ 39.782] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 39.783] (II) Module modesetting: vendor="X.Org Foundation"
[ 39.783] compiled for 1.21.1.21, module version = 1.21.1
[ 39.783] Module class: X.Org Video Driver
[ 39.783] ABI class: X.Org Video Driver, version 25.2
[ 39.783] (II) LoadModule: "fbdev"
[ 39.784] (WW) Warning, couldn't open module fbdev
[ 39.784] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 39.784] (II) LoadModule: "vesa"
[ 39.784] (WW) Warning, couldn't open module vesa
[ 39.784] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 39.784] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 39.826] (II) modeset(0): using drv /dev/dri/card1
[ 39.826] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 39.826] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 39.826] (==) modeset(0): RGB weight 888
[ 39.826] (==) modeset(0): Default visual is TrueColor
[ 39.826] (II) Loading sub module "glamoregl"
[ 39.826] (II) LoadModule: "glamoregl"
[ 39.827] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 39.836] (II) Module glamoregl: vendor="X.Org Foundation"
[ 39.836] compiled for 1.21.1.21, module version = 1.0.1
[ 39.836] ABI class: X.Org ANSI C Emulation, version 0.4
[ 40.491] (II) modeset(0): glamor: Using OpenGL 4.6 context.
[ 40.491] (II) modeset(0): glamor X acceleration enabled on AMD Radeon Vega 8 Graphics (radeonsi, raven, ACO, DRM 3.64, 6.18.9-arch1-2)
[ 40.491] (II) modeset(0): glamor initialized
[ 40.491] (==) modeset(0): VariableRefresh: disabled
[ 40.491] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 40.492] (II) modeset(0): Output eDP-1 has no monitor section
[ 40.493] (II) modeset(0): Output HDMI-1 has no monitor section
[ 40.493] (II) modeset(0): Output DP-1 has no monitor section
[ 40.494] (II) modeset(0): EDID for output eDP-1
[ 40.494] (II) modeset(0): Manufacturer: BOE Model: 92c Serial#: 0
[ 40.494] (II) modeset(0): Year: 2020 Week: 11
[ 40.494] (II) modeset(0): EDID Version: 1.4
[ 40.494] (II) modeset(0): Digital Display Input
[ 40.494] (II) modeset(0): 6 bits per channel
[ 40.494] (II) modeset(0): Digital interface is DisplayPort
[ 40.494] (II) modeset(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 40.494] (II) modeset(0): Gamma: 2.20
[ 40.494] (II) modeset(0): No DPMS capabilities specified
[ 40.494] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 40.494] (II) modeset(0): First detailed timing is preferred mode
[ 40.494] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 40.494] (II) modeset(0): Display is continuous-frequency
[ 40.494] (II) modeset(0): redX: 0.589 redY: 0.343 greenX: 0.330 greenY: 0.570
[ 40.494] (II) modeset(0): blueX: 0.157 blueY: 0.137 whiteX: 0.313 whiteY: 0.329
[ 40.494] (II) modeset(0): Manufacturer's mask: 0
[ 40.494] (II) modeset(0): Supported detailed timing:
[ 40.494] (II) modeset(0): clock: 78.4 MHz Image Size: 309 x 174 mm
[ 40.494] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1588 h_border: 0
[ 40.494] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 823 v_border: 0
[ 40.494] (II) modeset(0): Supported detailed timing:
[ 40.494] (II) modeset(0): clock: 52.3 MHz Image Size: 309 x 174 mm
[ 40.495] (II) modeset(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1588 h_border: 0
[ 40.495] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 823 v_border: 0
[ 40.495] (II) modeset(0): Unknown vendor-specific block 2
[ 40.495] (II) modeset(0): EDID (in hex):
[ 40.495] (II) modeset(0): 00ffffffffffff0009e52c0900000000
[ 40.495] (II) modeset(0): 0b1e0104951f117803f8459657549228
[ 40.495] (II) modeset(0): 23505400000001010101010101010101
[ 40.495] (II) modeset(0): 010101010101a21e56de500037303020
[ 40.495] (II) modeset(0): 360035ae1000001a6c1456de50003730
[ 40.495] (II) modeset(0): 3020360035ae1000001a000000000000
[ 40.495] (II) modeset(0): 00000000000000000000000000000002
[ 40.495] (II) modeset(0): 000d40ff0a3c7d1111217d0000000059
[ 40.495] (II) modeset(0): Printing probed modes for output eDP-1
[ 40.495] (II) modeset(0): Modeline "1366x768"x60.0 78.42 1366 1414 1446 1588 768 771 777 823 +hsync -vsync (49.4 kHz eP)
[ 40.495] (II) modeset(0): Modeline "1366x768"x40.0 52.28 1366 1414 1446 1588 768 771 777 823 +hsync -vsync (32.9 kHz e)
[ 40.495] (II) modeset(0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 40.495] (II) modeset(0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 40.495] (II) modeset(0): Modeline "1280x720"x60.0 78.42 1280 1414 1446 1588 720 771 777 823 +hsync -vsync (49.4 kHz e)
[ 40.495] (II) modeset(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 40.495] (II) modeset(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 40.495] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 40.495] (II) modeset(0): Modeline "1024x768"x60.0 78.42 1024 1414 1446 1588 768 771 777 823 +hsync -vsync (49.4 kHz e)
[ 40.495] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 40.495] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 40.495] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 40.495] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 40.495] (II) modeset(0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 40.495] (II) modeset(0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 40.495] (II) modeset(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 40.495] (II) modeset(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 40.495] (II) modeset(0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 40.495] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 40.495] (II) modeset(0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 40.495] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 40.495] (II) modeset(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 40.495] (II) modeset(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 40.495] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 40.495] (II) modeset(0): Modeline "800x600"x60.0 78.42 800 1414 1446 1588 600 771 777 823 +hsync -vsync (49.4 kHz e)
[ 40.495] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 40.495] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 40.495] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 40.495] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 40.495] (II) modeset(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 40.495] (II) modeset(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 40.495] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 40.496] (II) modeset(0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 40.496] (II) modeset(0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 40.496] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 40.496] (II) modeset(0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 40.496] (II) modeset(0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 40.496] (II) modeset(0): Modeline "640x480"x60.0 78.42 640 1414 1446 1588 480 771 777 823 +hsync -vsync (49.4 kHz e)
[ 40.496] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 40.496] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 40.496] (II) modeset(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 40.496] (II) modeset(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 40.496] (II) modeset(0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 40.496] (II) modeset(0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 40.496] (II) modeset(0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 40.496] (II) modeset(0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 40.496] (II) modeset(0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 40.496] (II) modeset(0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 40.496] (II) modeset(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 40.496] (II) modeset(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 40.496] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 40.496] (II) modeset(0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 40.496] (II) modeset(0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 40.496] (II) modeset(0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 40.496] (II) modeset(0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 40.496] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 40.496] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 40.496] (II) modeset(0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 40.496] (II) modeset(0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 40.496] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 40.496] (II) modeset(0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 40.496] (II) modeset(0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 40.496] (II) modeset(0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 40.496] (II) modeset(0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 40.496] (II) modeset(0): EDID for output HDMI-1
[ 40.496] (II) modeset(0): EDID for output DP-1
[ 40.496] (II) modeset(0): Output eDP-1 connected
[ 40.496] (II) modeset(0): Output HDMI-1 disconnected
[ 40.496] (II) modeset(0): Output DP-1 disconnected
[ 40.496] (II) modeset(0): Using exact sizes for initial modes
[ 40.496] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[ 40.496] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 40.496] (==) modeset(0): DPI set to (96, 96)
[ 40.496] (II) Loading sub module "fb"
[ 40.496] (II) LoadModule: "fb"
[ 40.496] (II) Module "fb" already built-in
[ 40.545] (==) modeset(0): Backing store enabled
[ 40.545] (==) modeset(0): Silken mouse enabled
[ 40.546] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 40.546] (==) modeset(0): DPMS enabled
[ 40.546] (II) modeset(0): [DRI2] Setup complete
[ 40.546] (II) modeset(0): [DRI2] DRI driver: radeonsi
[ 40.546] (II) modeset(0): [DRI2] VDPAU driver: radeonsi
[ 40.546] (II) Initializing extension Generic Event Extension
[ 40.546] (II) Initializing extension SHAPE
[ 40.546] (II) Initializing extension MIT-SHM
[ 40.546] (II) Initializing extension XInputExtension
[ 40.546] (II) Initializing extension XTEST
[ 40.547] (II) Initializing extension BIG-REQUESTS
[ 40.547] (II) Initializing extension SYNC
[ 40.547] (II) Initializing extension XKEYBOARD
[ 40.547] (II) Initializing extension XC-MISC
[ 40.547] (II) Initializing extension SECURITY
[ 40.547] (II) Initializing extension XFIXES
[ 40.547] (II) Initializing extension RENDER
[ 40.547] (II) Initializing extension RANDR
[ 40.548] (II) Initializing extension COMPOSITE
[ 40.548] (II) Initializing extension DAMAGE
[ 40.548] (II) Initializing extension MIT-SCREEN-SAVER
[ 40.548] (II) Initializing extension DOUBLE-BUFFER
[ 40.548] (II) Initializing extension RECORD
[ 40.548] (II) Initializing extension DPMS
[ 40.548] (II) Initializing extension Present
[ 40.548] (II) Initializing extension DRI3
[ 40.549] (II) Initializing extension X-Resource
[ 40.549] (II) Initializing extension XVideo
[ 40.549] (II) Initializing extension XVideo-MotionCompensation
[ 40.549] (II) Initializing extension GLX
[ 40.567] (II) AIGLX: Loaded and initialized radeonsi
[ 40.567] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 40.567] (II) Initializing extension XFree86-VidModeExtension
[ 40.567] (II) Initializing extension XFree86-DGA
[ 40.567] (II) Initializing extension XFree86-DRI
[ 40.567] (II) Initializing extension DRI2
[ 40.568] (II) modeset(0): Damage tracking initialized
[ 40.568] (II) modeset(0): Setting screen physical size to 361 x 203
[ 40.685] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 40.685] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 40.685] (**) Power Button: Applying InputClass "system-keyboard"
[ 40.685] (II) LoadModule: "libinput"
[ 40.685] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 40.698] (II) Module libinput: vendor="X.Org Foundation"
[ 40.698] compiled for 1.21.1.13, module version = 1.5.0
[ 40.698] Module class: X.Org XInput Driver
[ 40.698] ABI class: X.Org XInput driver, version 24.4
[ 40.698] (II) Using input driver 'libinput' for 'Power Button'
[ 40.698] (**) Power Button: always reports core events
[ 40.698] (**) Option "Device" "/dev/input/event2"
[ 40.707] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 40.707] (II) event2 - Power Button: device is a keyboard
[ 40.707] (II) event2 - Power Button: device removed
[ 40.720] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 40.720] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 40.720] (**) Option "xkb_model" "pc105+inet"
[ 40.720] (**) Option "xkb_layout" "us"
[ 40.720] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 40.758] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 40.758] (II) event2 - Power Button: device is a keyboard
[ 40.760] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 40.760] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 40.760] (**) Video Bus: Applying InputClass "system-keyboard"
[ 40.760] (II) Using input driver 'libinput' for 'Video Bus'
[ 40.760] (**) Video Bus: always reports core events
[ 40.760] (**) Option "Device" "/dev/input/event4"
[ 40.762] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 40.762] (II) event4 - Video Bus: device is a keyboard
[ 40.762] (II) event4 - Video Bus: device removed
[ 40.788] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:00/input/input4/event4"
[ 40.788] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 40.788] (**) Option "xkb_model" "pc105+inet"
[ 40.788] (**) Option "xkb_layout" "us"
[ 40.788] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 40.790] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 40.790] (II) event4 - Video Bus: device is a keyboard
[ 40.792] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 40.792] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 40.792] (**) Power Button: Applying InputClass "system-keyboard"
[ 40.792] (II) Using input driver 'libinput' for 'Power Button'
[ 40.792] (**) Power Button: always reports core events
[ 40.792] (**) Option "Device" "/dev/input/event0"
[ 40.793] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 40.793] (II) event0 - Power Button: device is a keyboard
[ 40.794] (II) event0 - Power Button: device removed
[ 40.805] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 40.805] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 40.805] (**) Option "xkb_model" "pc105+inet"
[ 40.805] (**) Option "xkb_layout" "us"
[ 40.805] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 40.807] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 40.807] (II) event0 - Power Button: device is a keyboard
[ 40.808] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 40.808] (II) No input driver specified, ignoring this device.
[ 40.808] (II) This device may have been added with another device file.
[ 40.810] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event10)
[ 40.810] (II) No input driver specified, ignoring this device.
[ 40.810] (II) This device may have been added with another device file.
[ 40.811] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event11)
[ 40.811] (II) No input driver specified, ignoring this device.
[ 40.811] (II) This device may have been added with another device file.
[ 40.812] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event12)
[ 40.812] (II) No input driver specified, ignoring this device.
[ 40.812] (II) This device may have been added with another device file.
[ 40.814] (II) config/udev: Adding input device ELAN0708:00 04F3:30A0 Mouse (/dev/input/event7)
[ 40.814] (**) ELAN0708:00 04F3:30A0 Mouse: Applying InputClass "libinput pointer catchall"
[ 40.814] (II) Using input driver 'libinput' for 'ELAN0708:00 04F3:30A0 Mouse'
[ 40.814] (**) ELAN0708:00 04F3:30A0 Mouse: always reports core events
[ 40.814] (**) Option "Device" "/dev/input/event7"
[ 40.819] (II) event7 - ELAN0708:00 04F3:30A0 Mouse: is tagged by udev as: Mouse
[ 40.820] (II) event7 - ELAN0708:00 04F3:30A0 Mouse: device is a pointer
[ 40.820] (II) event7 - ELAN0708:00 04F3:30A0 Mouse: device removed
[ 40.846] (II) libinput: ELAN0708:00 04F3:30A0 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 40.846] (II) libinput: ELAN0708:00 04F3:30A0 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 40.846] (II) libinput: ELAN0708:00 04F3:30A0 Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 40.846] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:01/i2c-0/i2c-ELAN0708:00/0018:04F3:30A0.0001/input/input11/event7"
[ 40.846] (II) XINPUT: Adding extended input device "ELAN0708:00 04F3:30A0 Mouse" (type: MOUSE, id 9)
[ 40.846] (**) Option "AccelerationScheme" "none"
[ 40.846] (**) ELAN0708:00 04F3:30A0 Mouse: (accel) selected scheme none/0
[ 40.846] (**) ELAN0708:00 04F3:30A0 Mouse: (accel) acceleration factor: 2.000
[ 40.846] (**) ELAN0708:00 04F3:30A0 Mouse: (accel) acceleration threshold: 4
[ 40.850] (II) event7 - ELAN0708:00 04F3:30A0 Mouse: is tagged by udev as: Mouse
[ 40.850] (II) event7 - ELAN0708:00 04F3:30A0 Mouse: device is a pointer
[ 40.852] (II) config/udev: Adding input device ELAN0708:00 04F3:30A0 Mouse (/dev/input/mouse0)
[ 40.852] (II) No input driver specified, ignoring this device.
[ 40.852] (II) This device may have been added with another device file.
[ 40.854] (II) config/udev: Adding input device ELAN0708:00 04F3:30A0 Touchpad (/dev/input/event8)
[ 40.854] (**) ELAN0708:00 04F3:30A0 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 40.854] (II) Using input driver 'libinput' for 'ELAN0708:00 04F3:30A0 Touchpad'
[ 40.854] (**) ELAN0708:00 04F3:30A0 Touchpad: always reports core events
[ 40.854] (**) Option "Device" "/dev/input/event8"
[ 40.856] (II) event8 - ELAN0708:00 04F3:30A0 Touchpad: is tagged by udev as: Touchpad
[ 40.858] (II) event8 - ELAN0708:00 04F3:30A0 Touchpad: device is a touchpad
[ 40.859] (II) event8 - ELAN0708:00 04F3:30A0 Touchpad: device removed
[ 40.884] (II) libinput: ELAN0708:00 04F3:30A0 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 40.884] (II) libinput: ELAN0708:00 04F3:30A0 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 40.884] (II) libinput: ELAN0708:00 04F3:30A0 Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 40.884] (**) Option "config_info" "udev:/sys/devices/platform/AMDI0010:01/i2c-0/i2c-ELAN0708:00/0018:04F3:30A0.0001/input/input13/event8"
[ 40.885] (II) XINPUT: Adding extended input device "ELAN0708:00 04F3:30A0 Touchpad" (type: TOUCHPAD, id 10)
[ 40.886] (**) Option "AccelerationScheme" "none"
[ 40.886] (**) ELAN0708:00 04F3:30A0 Touchpad: (accel) selected scheme none/0
[ 40.886] (**) ELAN0708:00 04F3:30A0 Touchpad: (accel) acceleration factor: 2.000
[ 40.886] (**) ELAN0708:00 04F3:30A0 Touchpad: (accel) acceleration threshold: 4
[ 40.888] (II) event8 - ELAN0708:00 04F3:30A0 Touchpad: is tagged by udev as: Touchpad
[ 40.891] (II) event8 - ELAN0708:00 04F3:30A0 Touchpad: device is a touchpad
[ 40.893] (II) config/udev: Adding input device ELAN0708:00 04F3:30A0 Touchpad (/dev/input/mouse1)
[ 40.893] (II) No input driver specified, ignoring this device.
[ 40.893] (II) This device may have been added with another device file.
[ 40.894] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 40.894] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 40.894] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 40.894] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 40.894] (**) AT Translated Set 2 keyboard: always reports core events
[ 40.894] (**) Option "Device" "/dev/input/event3"
[ 40.896] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 40.896] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 40.897] (II) event3 - AT Translated Set 2 keyboard: device removed
[ 40.910] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 40.910] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 40.910] (**) Option "xkb_model" "pc105+inet"
[ 40.910] (**) Option "xkb_layout" "us"
[ 40.910] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 40.913] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 40.914] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard
[ 40.915] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 40.915] (II) No input driver specified, ignoring this device.
[ 40.915] (II) This device may have been added with another device file.
[ 40.923] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[ 40.923] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 40.923] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[ 40.923] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[ 40.923] (**) HP WMI hotkeys: always reports core events
[ 40.923] (**) Option "Device" "/dev/input/event9"
[ 40.924] (II) event9 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 40.924] (II) event9 - HP WMI hotkeys: device is a keyboard
[ 40.924] (II) event9 - HP WMI hotkeys: device removed
[ 40.935] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event9"
[ 40.935] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[ 40.935] (**) Option "xkb_model" "pc105+inet"
[ 40.935] (**) Option "xkb_layout" "us"
[ 40.935] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 40.936] (II) event9 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[ 40.936] (II) event9 - HP WMI hotkeys: device is a keyboard
[ 40.937] (II) config/udev: Adding input device Wireless hotkeys (/dev/input/event5)
[ 40.937] (**) Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[ 40.937] (**) Wireless hotkeys: Applying InputClass "system-keyboard"
[ 40.937] (II) Using input driver 'libinput' for 'Wireless hotkeys'
[ 40.937] (**) Wireless hotkeys: always reports core events
[ 40.937] (**) Option "Device" "/dev/input/event5"
[ 40.938] (II) event5 - Wireless hotkeys: is tagged by udev as: Keyboard
[ 40.938] (II) event5 - Wireless hotkeys: device is a keyboard
[ 40.939] (II) event5 - Wireless hotkeys: device removed
[ 40.965] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 40.965] (II) XINPUT: Adding extended input device "Wireless hotkeys" (type: KEYBOARD, id 13)
[ 40.965] (**) Option "xkb_model" "pc105+inet"
[ 40.965] (**) Option "xkb_layout" "us"
[ 40.965] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 40.966] (II) event5 - Wireless hotkeys: is tagged by udev as: Keyboard
[ 40.966] (II) event5 - Wireless hotkeys: device is a keyboard
[ 40.981] (II) modeset(0): Disabling kernel dirty updates, not required.
[ 41.078] (II) modeset(0): EDID vendor "BOE", prod id 2348
[ 41.078] (II) modeset(0): Printing DDC gathered Modelines:
[ 41.078] (II) modeset(0): Modeline "1366x768"x0.0 78.42 1366 1414 1446 1588 768 771 777 823 +hsync -vsync (49.4 kHz eP)
[ 41.079] (II) modeset(0): Modeline "1366x768"x0.0 52.28 1366 1414 1446 1588 768 771 777 823 +hsync -vsync (32.9 kHz e)
[ 53.032] (II) modeset(0): EDID vendor "BOE", prod id 2348
[ 53.033] (II) modeset(0): Printing DDC gathered Modelines:
[ 53.033] (II) modeset(0): Modeline "1366x768"x0.0 78.42 1366 1414 1446 1588 768 771 777 823 +hsync -vsync (49.4 kHz eP)
[ 53.033] (II) modeset(0): Modeline "1366x768"x0.0 52.28 1366 1414 1446 1588 768 771 777 823 +hsync -vsync (32.9 kHz e)┌──(shridhyan@Aranya-Marjara)-[~]
└─$ watt
7 Watts
7 Watts
7 Watts
7 Watts
7 Watts
7 Watts
7 Watts
10 Watts
8 Watts
7 Watts
7 Watts
7 Watts
7 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
7 Watts
7 Watts
6 Watts
6 Watts
9 Watts
6 Watts
6 Watts
6 Watts
8 Watts
7 Watts
8 Watts
7 Watts
8 Watts
8 Watts
8 Watts
7 Watts
6 Watts
6 Watts
7 Watts
6 Watts
7 Watts
7 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
7 Watts
6 Watts
6 Watts
6 Watts
6 Watts
7 Watts
6 Watts
7 Watts
6 Watts
6 Watts
6 Watts
6 Watts
7 Watts
6 Watts
7 Watts
6 Watts
6 Watts
6 Watts
6 Watts
7 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
6 Watts
7 Watts
10 Watts
10 Watts
7 Watts
7 Watts
8 Watts
7 Watts
7 Watts
7 Watts
6 Wattsyes keyboard and the little space left for "palm rest" does feel hot
Regarding the 7W draw, that was actually while playing YouTube in the background. It stays consistently low, which is why the physical heat on the palm rest is so confusing. It seems like the heat isn't coming from the CPU 'working hard,' but maybe from a specific component (like the bridge) that isn't being reported in the discharge rate properly.
I'll try a Live Distro as suggested to see if the thermal behavior persists there, which would isolate this to pure hardware/firmware.
edit2:
sorry it was issue with sddm, logged in with
startx /usr/bin/openbox-sessionand I saw black screen I started clicking randomly and I bymistakely right clicked I saw options \o/ opened terminal and saw the battery discharge rate, it was same first launched terminal then ran powertop shows 4.68 and I moved the cursor a bit and it's back to 5.11 W and never gone down, so X11 or Wayland similar battery discharge rate...
Edit3:
Tested Live ISO, when booted temps was 59 and YT/Browsing was about fluctuated b/w 57°C and 72°C, and when I booted back to Arch I saw temps 44°C! idle and YT tested it gone 55°C or 58°C and upon closing it did go down back to 46°C!! I thought "BOOYAH!!" but no hibernation broke, and this time even REISUB did not work insert crying emoji
the journal
https://0x0.st/PmuM.txt
and
Feb 13 00:12:15 Aranya-Marjara systemd-sleep[13062]: User sessions remain unfrozen on explicit request ($SYSTEMD_SLEEP_FREEZE_USER_SESSIONS=0).Last edited by 5hridhyan (2026-02-12 19:09:45)
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
#12 2026-02-12 21:19:47
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 73,420
Re: [solved]High temps, locked EC logic
So… the xorg log looks completely unsuspicous and obviously we figured why openbox "didn't work" (cause ain't a fancy DE 
)
Booting from another device might have changed sth. in the ACPI (though I assume there's no windows around, but still might be related to sleep/hibernation?)
How has the temperature development (sensors and your paws) since then?
Offline
#13 2026-02-13 03:26:03
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
Re: [solved]High temps, locked EC logic
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ sensors
hp-isa-0000
Adapter: ISA adapter
pwm1: N/A
amdgpu-pci-0400
Adapter: PCI adapter
vddgfx: N/A
vddnb: N/A
edge: +41.0°C
sclk: 200 MHz
BAT0-acpi-0
Adapter: ACPI interface
in0: 10.97 V
curr1: 609.00 mA
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +41.4°C
nvme-pci-0100
Adapter: PCI adapter
Composite: +24.9°C (low = -0.1°C, high = +84.8°C)
(crit = +94.8°C)
ERROR: Can't get value of subfeature temp2_min: I/O error
ERROR: Can't get value of subfeature temp2_max: I/O error
Sensor 1: +39.9°C (low = +0.0°C, high = +0.0°C)
acpitz-acpi-0
Adapter: ACPI interface
temp1: +41.0°C
temp2: +0.0°C Yes it droped, and now with YT playing(without plugged in) goes b/w 45 to 52, and my palms paws feel normal... so if unpredictability had a face:
https://support.hp.com/lv-en/document/i … 4471100-16
so the temps were just a distraction the system/hardware is fine unless it decides to, at least if REISUB worked, I wouldn't be concerned this much I would have marked the thread as solved by "Live USB;re-initialize;drops temps"
temps did dropped but now the fear "oh low battery"
but I think because of those params at least no TLB flush errors, even if Hibernation didn't work...
Yes No windows ntg, only Arch now...
https://0x0.st/Pa4E.txt
https://0x0.st/Pa4g.txt
Hibernation fails it doesn't even start and no TLB flush errors the bad news is it's not consistent...
Edit:
Yeah I think I'm being a help vampire I'm really sorry
the thing is automatic hibernation doesn't work, it's maybe because of race conditions etc, and importantly Seth at least it's not worth your time to figure out and how to fix it for this unpredictable Hardware/system...
and since my original issue was about High temps and Ec logic I think I got low temps and understood a user cannot win against EC/fimrware, hence Marking the Thread as SOLVED...
I'll plug in before low battery and if I failed to plug in then... I'll accept the consequences as a karma
Thanks @seth for your reply, time and guidance, I appreciate your patience ^^
signing off to watch and complete those huge anime list, and I promise I'll report back about samurai champloo that I liked it
Last edited by 5hridhyan (2026-02-13 07:11:38)
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
#14 2026-02-13 10:35:08
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 73,420
Re: [solved]High temps, locked EC logic
Feb 13 09:51:47 Aranya-Marjara kernel: PM: hibernation: Creating image:
Feb 13 09:51:47 Aranya-Marjara kernel: PM: hibernation: Need to copy 784298 pages
Feb 13 09:51:47 Aranya-Marjara kernel: PM: hibernation: Normal pages needed: 784298 + 1024, available pages: 765228
Feb 13 09:51:47 Aranya-Marjara kernel: PM: hibernation: Not enough free memory
Feb 13 09:51:47 Aranya-Marjara kernel: PM: hibernation: Error -12 creating image
Feb 13 09:51:47 Aranya-Marjara kernel: PM: hibernation: Basic memory bitmaps freed
Feb 13 09:51:47 Aranya-Marjara kernel: PM: hibernation: hibernation exit
Feb 13 09:51:47 Aranya-Marjara systemd[1]: systemd-hibernate.service: Main process exited, code=exited, status=1/FAILURE
Feb 13 09:51:47 Aranya-Marjara systemd[1]: systemd-hibernate.service: Failed with result 'exit-code'.
Feb 13 09:51:47 Aranya-Marjara systemd[1]: Failed to start System Hibernate.
Feb 13 09:51:47 Aranya-Marjara systemd[1]: Dependency failed for System Hibernation.
Feb 13 09:51:47 Aranya-Marjara systemd[1]: hibernate.target: Job hibernate.target/start failed with result 'dependency'.Feb 13 09:38:45 Aranya-Marjara systemd[1]: Activating swap /swap/swapfile...
Feb 13 09:38:45 Aranya-Marjara kernel: Adding 16777212k swap on /swap/swapfile. Priority:-2 extents:116 across:120218168k SS
Feb 13 09:38:45 Aranya-Marjara systemd[1]: Activated swap /swap/swapfile.
Feb 13 09:38:47 Aranya-Marjara systemd[1]: Starting Create swap on /dev/zram0...
Feb 13 09:38:47 Aranya-Marjara systemd-makefs[1021]: /dev/zram0 successfully formatted as swap (label "zram0", uuid fee41a39-3982-4907-8065-7f3a3159ebce)
Feb 13 09:38:47 Aranya-Marjara systemd[1]: Finished Create swap on /dev/zram0.
Feb 13 09:38:47 Aranya-Marjara systemd[1]: Activating swap Compressed Swap on /dev/zram0...
Feb 13 09:38:47 Aranya-Marjara kernel: Adding 2983932k swap on /dev/zram0. Priority:100 extents:1 across:2983932k SSDscAt least in the first case your swapfile is too small, not sure whether zram swap would be decompressed/unswapped in the process.
Offline
#15 2026-02-13 13:46:25
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
Re: [solved]High temps, locked EC logic
Oh! yeah, now I've updated /etc/systemd/sleep.conf with HibernateMemoryPressureLimit=50% and HibernateMode=platform shutdown to ensure the kernel can reclaim enough pages before creating the image, I also discovered a legacy Ubuntu swap signature was still present in the swapfile header which I remember I nuked it and even re-wrote with dd! anyways I've now cleared with a fresh mkswap. Currently testing with the corrected Btrfs offset (17423426) and the new memory limits, I'll report back
Edit:
my battery decided it will last long this time, in the mean time I was slightly being paranoid so this is what I did
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /usr/local/bin/crit-hibernate.sh
#!/bin/bash
STATUS=$(cat /sys/class/power_supply/BAT0/status)
CAPACITY=$(cat /sys/class/power_supply/BAT0/capacity)
if [ "$STATUS" = "Discharging" ] && [ "$CAPACITY" -le 7 ]; then
/usr/bin/systemctl hibernate
fi
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ ls -l /etc/udev/rules.d/99-low-battery.rules /usr/local/bin/crit-hibernate.sh
.rw-r--r-- root root 171 B Fri Feb 13 17:34:42 2026 /etc/udev/rules.d/99-low-battery.rules
.rwxr-xr-x root root 216 B Fri Feb 13 17:30:14 2026 /usr/local/bin/crit-hibernate.sh
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /etc/udev/rules.d/99-low-battery.rules
# Trigger when capacity is less than or equal to 7
SUBSYSTEM=="power_supply", ENV{CAPACITY}=="[0-7]", ATTR{status}=="Discharging", RUN+="/usr/local/bin/crit-hibernate.sh"
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ /usr/local/bin/crit-hibernate.sh
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /usr/local/bin/crit-hibernate.sh
#!/bin/bash
STATUS=$(cat /sys/class/power_supply/BAT0/status)
CAPACITY=$(cat /sys/class/power_supply/BAT0/capacity)
if [ "$STATUS" = "Discharging" ] && [ "$CAPACITY" -le 7 ]; then
/usr/bin/systemctl hibernate
fi
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /etc/UPower/UPower.conf
# Only the system vendor should modify this file, ordinary users
# should not have to change anything.
[UPower]
# Enable the Watts Up Pro device.
#
# The Watts Up Pro contains a generic FTDI USB device without a specific
# vendor and product ID. When we probe for WUP devices, we can cause
# the user to get a perplexing "Device or resource busy" error when
# attempting to use their non-WUP device.
#
# The generic FTDI device is known to also be used on:
#
# - Sparkfun FT232 breakout board
# - Parallax Propeller
#
# default=false
EnableWattsUpPro=false
# Don't poll the kernel for battery level changes.
#
# Some hardware will send us battery level changes through
# events, rather than us having to poll for it. This option
# allows disabling polling for hardware that sends out events.
#
# default=false
NoPollBatteries=false
# Do we ignore the lid state
#
# Some laptops are broken. The lid state is either inverted, or stuck
# on or off. We can't do much to fix these problems, but this is a way
# for users to make the laptop panel vanish, a state that might be used
# by a couple of user-space daemons. On Linux systems, see also
# logind.conf(5).
#
# default=false
IgnoreLid=false
# Policy for warnings and action based on battery levels
#
# Whether battery percentage based policy should be used. The default
# is to use the time left, change to true to use the percentage, which
# should work around broken firmwares. It is also more reliable than
# the time left (frantically saving all your files is going to use more
# battery than letting it rest for example).
# default=true
UsePercentageForPolicy=true
# When UsePercentageForPolicy is true, the levels at which UPower will
# consider the battery low, critical, or take action for the critical
# battery level.
#
# This will also be used for batteries which don't have time information
# such as that of peripherals.
#
# If any value is invalid, or not in descending order, the defaults
# will be used.
#
# Defaults:
# PercentageLow=20.0
# PercentageCritical=5.0
# PercentageAction=2.0
PercentageLow=15.0
PercentageCritical=5.0
PercentageAction=4.0
# When UsePercentageForPolicy is false, the time remaining in seconds at
# which UPower will consider the battery low, critical, or take action for
# the critical battery level.
#
# If any value is invalid, or not in descending order, the defaults
# will be used.
#
# Defaults:
# TimeLow=1200
# TimeCritical=300
# TimeAction=120
TimeLow=1200
TimeCritical=300
TimeAction=120
# Enable the risky CriticalPowerAction-Suspend
# This option is not recommended, but it is here for users who
# want to enable the risky CriticalPowerAction, such as "Suspend"
# to fulfill their needs.
# Default is false
AllowRiskyCriticalPowerAction=false
# The action to take when "TimeAction" or "PercentageAction" above has been
# reached for the batteries (UPS or laptop batteries) supplying the computer
#
# Possible values are:
# PowerOff
# Hibernate
# HybridSleep
# Suspend (AllowRiskyCriticalPowerAction should be true to use this option but risky)
# Ignore (AllowRiskyCriticalPowerAction should be true to use this option but risky)
#
# If Suspend isn't available or AllowRiskyCriticalPowerAction=false, HybridSleep will be used
# If HybridSleep isn't available, Hibernate will be used
# If Hibernate isn't available, PowerOff will be used
CriticalPowerAction=PowerOff
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /sys/power/disk
[platform] shutdown reboot suspend test_resume
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ free -h
total used free shared buff/cache available
Mem: 5.7Gi 3.8Gi 378Mi 48Mi 1.8Gi 1.9Gi
Swap: 18Gi 4.0Ki 18Gi
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /sys/power/image_size
0
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /usr/local/bin/crit-hibernate.sh
#!/bin/bash
STATUS=$(cat /sys/class/power_supply/BAT0/status)
CAPACITY=$(cat /sys/class/power_supply/BAT0/capacity)
if [ "$STATUS" = "Discharging" ] && [ "$CAPACITY" -le 7 ]; then
# Manually tell the kernel to drop caches to prevent -12 error
sync; echo 3 > /proc/sys/vm/drop_caches
/usr/bin/systemctl hibernate
fi
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /etc/udev/rules.d/99-low-battery.rules
# Trigger when capacity is less than or equal to 7
SUBSYSTEM=="power_supply", ENV{CAPACITY}=="[0-7]", ATTR{status}=="Discharging", RUN+="/usr/local/bin/crit-hibernate.sh"
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /etc/tmpfiles.d/hibernate-image-size.conf
w /sys/power/image_size - - - - 0
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /etc/systemd/sleep.conf
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it under the
# terms of the GNU Lesser General Public License as published by the Free
# Software Foundation; either version 2.1 of the License, or (at your option)
# any later version.
#
# Entries in this file show the compile time defaults. Local configuration
# should be created by either modifying this file (or a copy of it placed in
# /etc/ if the original file is shipped in /usr/), or by creating "drop-ins" in
# the /etc/systemd/sleep.conf.d/ directory. The latter is generally
# recommended. Defaults can be restored by simply deleting the main
# configuration file and all drop-ins located in /etc/.
#
# Use 'systemd-analyze cat-config systemd/sleep.conf' to display the full config.
#
# See systemd-sleep.conf(5) for details.
[Sleep]
#AllowSuspend=yes
#AllowHibernation=yes
#AllowSuspendThenHibernate=yes
#AllowHybridSleep=yes
#SuspendState=mem standby freeze
#HibernateMode=platform shutdown
#MemorySleepMode=
#HibernateDelaySec=
#HibernateOnACPower=yes
#SuspendEstimationSec=60min
HibernateMode=platform shutdown
#HibernateMemoryPressureLimit=50%
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ I'll report back what happens...
Last edited by 5hridhyan (2026-02-14 03:26:15)
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
#16 2026-02-13 15:20:55
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
Re: [solved]High temps, locked EC logic
udev rules was a dumb idea but yeah with similar logic, the hibernation worked, but TLB flush errors even though I have those params and in fact added extra to be safe and sure
https://0x0.st/Pa6L.txt
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /etc/tmpfiles.d/hibernate-image-size.conf
w /sys/power/image_size - - - - 0
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat pre-hibernate.conf
cat: pre-hibernate.conf: No such file or directory
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /etc/systemd/system/systemd-hibernate.service.d/pre-hibernate.conf
[Service]
ExecStartPre=/usr/bin/bash -c "sync; echo 3 > /proc/sys/vm/drop_caches"but idk how to tackle the TLB flush errors...
is fatal? if not
5hridhyan wrote:
I have those params and in fact added extra to be safe and sure
and those params don't seem to help I'll remove them....
Last edited by 5hridhyan (2026-02-13 16:40:34)
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
#17 2026-02-13 20:16:41
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 73,420
Re: [solved]High temps, locked EC logic
Feb 13 20:22:54 Aranya-Marjara kernel: Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c0ae4a73-5088-4f7e-b497-ca1a4baa4dbe rw rootflags=subvol=@ cryptdevice=UUID=63984f23-816d-48d8-9493-119bf15c9a26:root zswap.enabled=0 rootfstype=btrfs loglevel=3 iommu=pt lsm=landlock,lockdown,yama,apparmor,bpf apparmor=1 security=apparmor pcie_aspm=off amdgpu.noretry=1 amdgpu.gpu_recovery=1 "acpi_osi=Windows 2015" pci=noats resume=UUID=c0ae4a73-5088-4f7e-b497-ca1a4baa4dbe resume_offset=17423426
Feb 13 20:22:54 Aranya-Marjara kernel: software IO TLB: mapped [mem 0x00000000cf217000-0x00000000d3217000] (64MB)
Feb 13 20:22:54 Aranya-Marjara kernel: perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
…
Feb 13 20:41:29 Aranya-Marjara kernel: amdgpu 0000:04:00.0: amdgpu: failed to write reg 28b4 wait reg 28c6
Feb 13 20:41:29 Aranya-Marjara kernel: amdgpu 0000:04:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
Feb 13 20:41:29 Aranya-Marjara systemd[1354]: Reached target Bluetooth.
Feb 13 20:41:29 Aranya-Marjara kernel: amdgpu 0000:04:00.0: amdgpu: TLB flush failed for PASID 32773.Why is there "iommu=pt" ?
https://lists.freedesktop.org/archives/ … 43447.html
Does "iommu=soft" help?
Offline
#18 2026-02-14 01:11:41
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
Re: [solved]High temps, locked EC logic
\o/
https://0x0.st/PahF.txt
The iommu=pt was a leftover from an earlier attempt to fix it...
switched to iommu=soft as suggested, and combined with amdgpu.gpu_recovery=1, the TLB flush errors have completely disappeared from my resume logs. Hibernation is now working perfectly on this Picasso/RV2 APU.
Thanks @seth I'll re-test hibernation for while and then I'll report back if it completely fixed it..
Last edited by 5hridhyan (2026-02-14 03:28:10)
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
#19 2026-02-14 08:55:22
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 73,420
Re: [solved]High temps, locked EC logic
See whether instead "amd_iommu=fullflush" works (or you don't need any special iommu setting at all)
Offline
#20 2026-02-14 10:52:20
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
Re: [solved]High temps, locked EC logic
https://0x0.st/PBXg.txt
will test without any iommu settings and report back.
Edit:
https://0x0.st/PBXF.txt
LoL without any iommu settings now it works, and in the fp I started adding iommu setting because of that! and now it doesn't errors!? I think I got lucky this time...
Last edited by 5hridhyan (2026-02-14 12:26:21)
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
#21 2026-02-14 15:05:24
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 73,420
Re: [solved]High temps, locked EC logic
seth all the time wrote:
Don't flail around
The original issue might have been fixed w/ a BIOS or kernel update or was always just the underdimensioned hibernation space
Much fun with Mugen, Jin and Fuu
Offline
#22 2026-02-14 15:25:33
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
Re: [solved]High temps, locked EC logic
yeah, I was gone insane like who reads DSDT just because their PC misbehaves at low battery!? 
(and before I was reading docs on internet to understand it!)
I need to learn how to isolate symptoms from causes, and need to look at one solution per problem...
in fact I never actually noticed the Error -12, I went "oh ubuntu image!?" "EC is unfair" "my laptop is hostile!!" yeah that was on me and from previous thread, in this thread(journey) I enabled Zswap and those "pre-hibernate.conf" and all, and tried `soft` and then normal (no iommu settings) so that's the change I guess I did for hibernation to fix and now hibernation also works and no TLB flush errors...
Thanks once again, and without your guidance I would have ended up making it worse, Thanks for saving me from a rabbit hole ^^
Much fun with Mugen, Jin and Fuu
Last edited by 5hridhyan (2026-02-14 17:53:06)
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
#23 2026-02-16 14:09:37
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
Re: [solved]High temps, locked EC logic
https://0x0.st/PBhg.txt
I tried hibernation again, it worked but TLB Flush again, I started striping out each params and even tried all again like `soft` `pt` etc ntg worked..., so still the same TLB flush and the log I uploaded now Is completely "bare bones" like no params, seth can you please help me to solve this race condition...
and after the last post of mine in this thread I hibernated again and it failed same ERROR -12 so the only change then I did is this
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /usr/local/bin/mem_slayer.sh
#!/bin/bash
sync
echo 3 > /proc/sys/vm/drop_caches
KILL_APPS=("firefox" "brave" "tor-browser" "zen" "code")
for app in "${KILL_APPS[@]}"; do
pkill -9 -f "$app"
done
echo 1 > /proc/sys/vm/compact_memory
sync
┌──(shridhyan@Aranya-Marjara)-[~]
└─$ cat /etc/systemd/system/systemd-hibernate.service.d/pre-hibernate.conf
[Service]
ExecStartPre=/usr/local/bin/mem_slayer.shso yeah hibernation works no doubt but TLB flush errors
Edit:
if this helps whenever TLB flush errors happens I see "lag" for noticeable microseconds, like using keyboard shortcuts to force kill apps, or moving workspaces with geastures(touchpad) frame drops
After each hibernation that triggers TLB flush errors, I need to reboot to restore smooth performance, otherwise, everything runs fine.
Last edited by 5hridhyan (2026-02-16 14:30:25)
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
#24 2026-02-16 14:35:02
- seth
- Member
- From: Don't DM me only for attention
- Registered: 2012-09-03
- Posts: 73,420
Re: [solved]High temps, locked EC logic
https://lkml.org/lkml/2026/1/6/796
Feb 16 13:32:31 Aranya-Marjara kernel: amdgpu 0000:04:00.0: amdgpu: Runtime PM not availableDo you disable amdgpu.runpm somewhere?
Offline
#25 2026-02-16 15:05:42
- 5hridhyan
- Member
- From: Asia
- Registered: 2025-12-25
- Posts: 308
Re: [solved]High temps, locked EC logic
No
└─$ cat /sys/module/amdgpu/parameters/runpm
-1I think it was not available from the start... or from I switched to linux....
https://lkml.org/lkml/2026/1/27/727
yes technically I could just plug in and move on/wait for fix, the worst part is
[ 3533.102818] ACPI: battery: [Firmware Bug]: (dis)charge rate invalid.I have to be ready with plugged in before it reaches 15 or 11% or else hibernation => TLB FLUSH ERRORS and all
Last edited by 5hridhyan (2026-02-16 17:14:33)
I expect some mercy from my fellow humans! ^^
Keep your virtue sharpened in a kingdom of carrion, and the throne they offer will be built from your ribs.
Online
Pages: 1