[SOLVED] Printing test page fails

AtaSmrk007 · 2026-09-02 18:38:47

I am trying to make use of the printer (Canon TS5150) on my system.

Using AUR I installed a vendor driver and using KDE settings added a printer. Everything seemed to work and I tried to print a test page. However nothing happened and queue was reporting pdftopdf exiting with status 1.

Content of my cups error for one job:

W [02/Sep/2026:10:33:58 +0200] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name is not activatable
W [02/Sep/2026:10:33:58 +0200] CreateProfile failed: org.freedesktop.DBus.Error.ServiceUnknown:The name is not activatable
W [02/Sep/2026:10:33:58 +0200] CreateDevice failed: org.freedesktop.DBus.Error.ServiceUnknown:The name is not activatable
E [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterChain: pdftopdf (PID 4512) stopped with status 1
E [02/Sep/2026:10:34:02 +0200] [Job 7] universal filter failed.
E [02/Sep/2026:10:34:02 +0200] [Job 7] Job stopped due to filter errors; please consult the /var/log/cups/error_log file for details.
D [02/Sep/2026:10:34:02 +0200] [Job 7] The following messages were recorded from 10:34:01 AM to 10:34:02 AM
D [02/Sep/2026:10:34:02 +0200] [Job 7] Applying default options...
D [02/Sep/2026:10:34:02 +0200] [Job 7] Adding start banner page "none".
D [02/Sep/2026:10:34:02 +0200] [Job 7] Adding end banner page "none".
D [02/Sep/2026:10:34:02 +0200] [Job 7] File of type application/vnd.cups-pdf-banner queued by "anze".
D [02/Sep/2026:10:34:02 +0200] [Job 7] hold_until=0
D [02/Sep/2026:10:34:02 +0200] [Job 7] Queued on "TS5100_series" by "anze".
D [02/Sep/2026:10:34:02 +0200] [Job 7] time-at-processing=1788338041
D [02/Sep/2026:10:34:02 +0200] [Job 7] 4 filters for job:
D [02/Sep/2026:10:34:02 +0200] [Job 7] - (application/vnd.cups-pdf-banner to application/vnd.universal-input, cost 0)
D [02/Sep/2026:10:34:02 +0200] [Job 7] universal (application/vnd.universal-input to application/vnd.cups-raster, cost 0)
D [02/Sep/2026:10:34:02 +0200] [Job 7] - (application/vnd.cups-raster to printer/TS5100_series/image/pwg-raster, cost 0)
D [02/Sep/2026:10:34:02 +0200] [Job 7] - (printer/TS5100_series/image/pwg-raster to printer/TS5100_series, cost 0)
D [02/Sep/2026:10:34:02 +0200] [Job 7] job-sheets=none,none
D [02/Sep/2026:10:34:02 +0200] [Job 7] argv[0]="TS5100_series"
D [02/Sep/2026:10:34:02 +0200] [Job 7] argv[1]="7"
D [02/Sep/2026:10:34:02 +0200] [Job 7] argv[2]="anze"
D [02/Sep/2026:10:34:02 +0200] [Job 7] argv[3]="Test Page"
D [02/Sep/2026:10:34:02 +0200] [Job 7] argv[4]="1"
D [02/Sep/2026:10:34:02 +0200] [Job 7] argv[5]="job-uuid=urn:uuid:5e3c4691-7844-3204-69a9-85b2da63a069 job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1788338041 time-at-processing=1788338041"
D [02/Sep/2026:10:34:02 +0200] [Job 7] argv[6]="/var/spool/cups/d00007-001"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[3]="CUPS_REQUESTROOT=/var/spool/cups"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[4]="CUPS_SERVERBIN=/usr/lib/cups"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[5]="CUPS_SERVERROOT=/etc/cups"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[6]="CUPS_STATEDIR=/run/cups"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[7]="HOME=/var/spool/cups/tmp"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[9]="SERVER_ADMIN=root@GamingStation"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[10]="SOFTWARE=CUPS/2.4.19"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[11]="TMPDIR=/var/spool/cups/tmp"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[12]="USER=root"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[13]="CUPS_MAX_MESSAGE=2047"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[14]="CUPS_SERVER=/run/cups/cups.sock"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[16]="IPP_PORT=631"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[17]="CHARSET=utf-8"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[18]="LANG=en_US.UTF-8"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[19]="PPD=/etc/cups/ppd/TS5100_series.ppd"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[20]="CONTENT_TYPE=application/vnd.cups-pdf-banner"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[21]="DEVICE_URI=socket://192.168.50.110"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[22]="PRINTER_INFO=Canon TS5100 series 3.000"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[23]="PRINTER_LOCATION="
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[24]="PRINTER=TS5100_series"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[25]="PRINTER_STATE_REASONS=none"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[26]="CUPS_FILETYPE=document"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[27]="FINAL_CONTENT_TYPE=image/pwg-raster"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[28]="AUTH_I****"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[29]="AUTH_U****"
D [02/Sep/2026:10:34:02 +0200] [Job 7] envp[30]="AUTH_P****"
D [02/Sep/2026:10:34:02 +0200] [Job 7] Started filter /usr/lib/cups/filter/universal (PID 4508)
D [02/Sep/2026:10:34:02 +0200] [Job 7] Started backend /usr/lib/cups/backend/socket (PID 4509)
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: +connecting-to-device
D [02/Sep/2026:10:34:02 +0200] [Job 7] Looking up \"192.168.50.110\"...
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -connecting-to-device
D [02/Sep/2026:10:34:02 +0200] [Job 7] 192.168.50.110=192.168.50.110
D [02/Sep/2026:10:34:02 +0200] [Job 7] ppdFilterLoadPPD: Color profile qualifier determined from job and PPD data \'..600dpi\'
D [02/Sep/2026:10:34:02 +0200] [Job 7] ppdFilterLoadPPD: No ICC profiles specified in PPD
D [02/Sep/2026:10:34:02 +0200] [Job 7] ppdFilterLoadPPD: Searching for profile \"600dpi/-\"...
D [02/Sep/2026:10:34:02 +0200] [Job 7] ppdFilterLoadPPD: Last filter determined by the PPD: -; Final data MIME type: image/pwg-raster => PDF filter will log pages in page_log.
D [02/Sep/2026:10:34:02 +0200] [Job 7] ppdFilterUniversal: \"*cupsFilter(2): ...\" lines in the PPD file:
D [02/Sep/2026:10:34:02 +0200] [Job 7] ppdFilterUniversal:    application/vnd.cups-raw application/octet-stream 0 -
D [02/Sep/2026:10:34:02 +0200] [Job 7] ppdFilterUniversal:    application/vnd.cups-raster image/pwg-raster 0 -
D [02/Sep/2026:10:34:02 +0200] [Job 7] ppdFilterUniversal:       --> Selecting this line
D [02/Sep/2026:10:34:02 +0200] [Job 7] ppdFilterUniversal:    Cost value is down to zero, stopping reading further lines
D [02/Sep/2026:10:34:02 +0200] [Job 7] ppdFilterUniversal: Converting from application/vnd.cups-pdf-banner to application/vnd.cups-raster, final output will be image/pwg-raster
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterUniversal: Converting from application/vnd.cups-pdf-banner to application/vnd.cups-raster
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterUniversal: Final output format for job: image/pwg-raster
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterUniversal: Adding bannertopdf to chain
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterUniversal: Adding pdftopdf to chain
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterUniversal: Adding ghostscript to chain
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterChain: Running filter: bannertopdf
D [02/Sep/2026:10:34:02 +0200] [Job 7] Set job-printer-state-message to "cfFilterChain: Running filter: bannertopdf", current level=INFO
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterChain: Running filter: pdftopdf
D [02/Sep/2026:10:34:02 +0200] [Job 7] Set job-printer-state-message to "cfFilterChain: Running filter: pdftopdf", current level=INFO
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterChain: Running filter: ghostscript
D [02/Sep/2026:10:34:02 +0200] [Job 7] Set job-printer-state-message to "cfFilterChain: Running filter: ghostscript", current level=INFO
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterChain: bannertopdf (PID 4511) started.
D [02/Sep/2026:10:34:02 +0200] [Job 7] Set job-printer-state-message to "cfFilterChain: bannertopdf (PID 4511) started.", current level=INFO
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterBannerToPDF: Copying input to temp file \"/var/spool/cups/tmp/0119f6aa2b0c7\"
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterChain: pdftopdf (PID 4512) started.
D [02/Sep/2026:10:34:02 +0200] [Job 7] Set job-printer-state-message to "cfFilterChain: pdftopdf (PID 4512) started.", current level=INFO
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterChain: ghostscript (PID 4513) started.
D [02/Sep/2026:10:34:02 +0200] [Job 7] Set job-printer-state-message to "cfFilterChain: ghostscript (PID 4513) started.", current level=INFO
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterGhostscript: Output format: CUPS Raster
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterGhostscript: Copying input to temp file \"/var/spool/cups/tmp/011a16aa2b366\"
D [02/Sep/2026:10:34:02 +0200] [Job 7] hrDeviceDesc=\"Canon TS5100 series 3.000\"
D [02/Sep/2026:10:34:02 +0200] [Job 7] Opening content stream 1/1...
D [02/Sep/2026:10:34:02 +0200] [Job 7] Opened stream 1
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterChain: bannertopdf completed with status 0.
D [02/Sep/2026:10:34:02 +0200] [Job 7] prtMarkerColorantValue.1.1 = \"black\"
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterChain: pdftopdf completed with status 1.
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterGhostscript: Input is empty, outputting empty file.
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterChain: ghostscript completed with status 0.
D [02/Sep/2026:10:34:02 +0200] [Job 7] prtMarkerColorantValue.1.2 = \"color\"
D [02/Sep/2026:10:34:02 +0200] [Job 7] ATTR: marker-colors=#000000,none
D [02/Sep/2026:10:34:02 +0200] [Job 7] ATTR: marker-names=\'\"Canon Black Ink Tank\"\',\'\"Canon Color Ink Tank\"\'
D [02/Sep/2026:10:34:02 +0200] [Job 7] ATTR: marker-types=ink-cartridge,ink-cartridge
D [02/Sep/2026:10:34:02 +0200] [Job 7] ATTR: marker-levels=-1,-1
D [02/Sep/2026:10:34:02 +0200] [Job 7] new_supply_state=0, change_state=ffff
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -developer-low-report
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -developer-empty-warning
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -marker-supply-low-report
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -marker-supply-empty-warning
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -opc-near-eol-report
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -opc-life-over-warning
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -toner-low-report
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -toner-empty-warning
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -waste-receptacle-almost-full-report
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -waste-receptacle-full-warning
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -cleaner-life-almost-over-report
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -cleaner-life-over-warning
D [02/Sep/2026:10:34:02 +0200] [Job 7] new_state=0, change_state=ffff
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -media-empty-warning
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -door-open-report
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -media-jam-warning
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -input-tray-missing-warning
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -output-tray-missing-warning
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -marker-supply-missing-warning
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -output-area-almost-full-report
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -output-area-full-warning
D [02/Sep/2026:10:34:02 +0200] [Job 7] backendWaitLoop(snmp_fd=5, addr=0x557bf1367c18, side_cb=0x557bb24df820)
D [02/Sep/2026:10:34:02 +0200] [Job 7] Connecting to 192.168.50.110:9100
D [02/Sep/2026:10:34:02 +0200] [Job 7] Connecting to printer.
D [02/Sep/2026:10:34:02 +0200] [Job 7] Set job-printer-state-message to "Connecting to printer.", current level=INFO
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: -connecting-to-device
D [02/Sep/2026:10:34:02 +0200] [Job 7] Connected to printer.
D [02/Sep/2026:10:34:02 +0200] [Job 7] Set job-printer-state-message to "Connected to printer.", current level=INFO
D [02/Sep/2026:10:34:02 +0200] [Job 7] Connected to 192.168.50.110:9100...
D [02/Sep/2026:10:34:02 +0200] [Job 7] backendRunLoop(print_fd=0, device_fd=6, snmp_fd=5, addr=0x557bf1367c18, use_bc=1, side_cb=0x557bb24df820)
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterChain: bannertopdf (PID 4511) exited with no errors.
D [02/Sep/2026:10:34:02 +0200] [Job 7] Set job-printer-state-message to "cfFilterChain: bannertopdf (PID 4511) exited with no errors.", current level=INFO
D [02/Sep/2026:10:34:02 +0200] [Job 7] Set job-printer-state-message to "cfFilterChain: pdftopdf (PID 4512) stopped with status 1", current level=ERROR
D [02/Sep/2026:10:34:02 +0200] [Job 7] cfFilterChain: ghostscript (PID 4513) exited with no errors.
D [02/Sep/2026:10:34:02 +0200] [Job 7] STATE: +cups-waiting-for-job-completed
D [02/Sep/2026:10:34:02 +0200] [Job 7] Waiting for printer to finish.
D [02/Sep/2026:10:34:02 +0200] [Job 7] prtMarkerSuppliesLevel.1.1 = -2
D [02/Sep/2026:10:34:02 +0200] [Job 7] prtMarkerSuppliesLevel.1.2 = -2
D [02/Sep/2026:10:34:02 +0200] [Job 7] ATTR: marker-levels=-1,-1
D [02/Sep/2026:10:34:02 +0200] [Job 7] new_supply_state=0, change_state=0
D [02/Sep/2026:10:34:02 +0200] [Job 7] new_state=0, change_state=0
D [02/Sep/2026:10:34:02 +0200] [Job 7] PID 4508 (/usr/lib/cups/filter/universal) stopped with status 1.
D [02/Sep/2026:10:34:02 +0200] [Job 7] Hint: Try setting the LogLevel to "debug" to find out more.
D [02/Sep/2026:10:34:02 +0200] [Job 7] PID 4509 (/usr/lib/cups/backend/socket) exited with no errors.
D [02/Sep/2026:10:34:02 +0200] [Job 7] End of messages
D [02/Sep/2026:10:34:02 +0200] [Job 7] printer-state=3(idle)
D [02/Sep/2026:10:34:02 +0200] [Job 7] printer-state-message="Waiting for printer to finish."
D [02/Sep/2026:10:34:02 +0200] [Job 7] printer-state-reasons=none

Communication with the printer works, I can trigger printing of printer's self test page. I also tried using "Generic IPP Everywhere Printer" driver, but have the same problem.

My google foo is failing me and I am unable to find any information about a problem like this.

Last edited by AtaSmrk007 (2026-09-04 07:14:52)

seth · 2026-09-02 20:53:20

For IPPe:

nmap 192.168.50.110

Random guess, do you have https://archlinux.org/packages/core/x86_64/which/ installed (a whole bunch of printer drivers silently depend on it to find gs)

AtaSmrk007 · 2026-09-03 14:22:00

I did not have which installed, but it made no difference.

One difference is that for some reason there are a lot more entries in the error log now.

D [03/Sep/2026:16:20:01 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Sep/2026:16:20:01 +0200] [Client 12] Server address is "/run/cups/cups.sock".
D [03/Sep/2026:16:20:01 +0200] [Client 12] Accepted from localhost (Domain)
D [03/Sep/2026:16:20:01 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:01 +0200] Expiring subscriptions...
D [03/Sep/2026:16:20:01 +0200] [Job 12] Unloading...
D [03/Sep/2026:16:20:01 +0200] cupsdAddCert: Adding certificate for PID 0
D [03/Sep/2026:16:20:01 +0200] Report: clients=2
D [03/Sep/2026:16:20:01 +0200] Report: jobs=2
D [03/Sep/2026:16:20:01 +0200] Report: jobs-active=0
D [03/Sep/2026:16:20:01 +0200] Report: printers=1
D [03/Sep/2026:16:20:01 +0200] Report: stringpool-string-count=1690
D [03/Sep/2026:16:20:01 +0200] Report: stringpool-alloc-bytes=9976
D [03/Sep/2026:16:20:01 +0200] Report: stringpool-total-bytes=33240
D [03/Sep/2026:16:20:01 +0200] [Client 12] POST /printers/TS5100_series HTTP/1.1
D [03/Sep/2026:16:20:01 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [03/Sep/2026:16:20:01 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:01 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:01 +0200] [Client 12] 2.0 Get-Printer-Attributes 20
D [03/Sep/2026:16:20:01 +0200] Get-Printer-Attributes ipp://localhost/printers/TS5100_series
D [03/Sep/2026:16:20:01 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:01 +0200] [Client 12] Content-Length: 140
D [03/Sep/2026:16:20:01 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:01 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:01 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=140, response=0x55f5a67d9370(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:01 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:01 +0200] [Client 12] bytes=0, http_state=0, data_remaining=140
D [03/Sep/2026:16:20:01 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:01 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:01 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:01 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Sep/2026:16:20:01 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Sep/2026:16:20:01 +0200] [Client 13] Server address is "/run/cups/cups.sock".
D [03/Sep/2026:16:20:01 +0200] [Client 13] Accepted from localhost (Domain)
D [03/Sep/2026:16:20:01 +0200] [Client 13] Waiting for request.
D [03/Sep/2026:16:20:01 +0200] [Client 13] GET /printers/TS5100_series.ppd HTTP/1.1
D [03/Sep/2026:16:20:01 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [03/Sep/2026:16:20:01 +0200] [Client 13] Read: status=200, state=3
D [03/Sep/2026:16:20:01 +0200] [Client 13] No authentication data provided.
D [03/Sep/2026:16:20:01 +0200] [Client 13] Processing GET /printers/TS5100_series.ppd
D [03/Sep/2026:16:20:01 +0200] [Client 13] filename="/etc/cups/ppd/TS5100_series.ppd", type=application/vnd.cups-ppd
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdSendHeader: code=200, type="application/vnd.cups-ppd", auth_type=0
D [03/Sep/2026:16:20:01 +0200] [Client 13] Sending file.
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] con->http=0x55f5a67ebb80
D [03/Sep/2026:16:20:01 +0200] [Client 13] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=91349, response=(nil)(), pipe_pid=0, file=21
D [03/Sep/2026:16:20:01 +0200] [Client 13] Flushing write buffer.
D [03/Sep/2026:16:20:01 +0200] [Client 13] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:01 +0200] [Client 13] Waiting for request.
D [03/Sep/2026:16:20:01 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [03/Sep/2026:16:20:01 +0200] [Client 13] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [03/Sep/2026:16:20:01 +0200] [Client 13] Closing connection.
D [03/Sep/2026:16:20:01 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [03/Sep/2026:16:20:02 +0200] Expiring subscriptions...
D [03/Sep/2026:16:20:04 +0200] [Client 12] POST /printers/TS5100_series HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [03/Sep/2026:16:20:04 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 12] 2.0 Print-Job 21
D [03/Sep/2026:16:20:04 +0200] Print-Job ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Job ???] Auto-typing file...
I [03/Sep/2026:16:20:04 +0200] [Job ???] Request file type is application/vnd.cups-pdf-banner.
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [03/Sep/2026:16:20:04 +0200] [Job 13] Applying default options...
D [03/Sep/2026:16:20:04 +0200] [Job 13] Adding default print-color-mode=monochrome
D [03/Sep/2026:16:20:04 +0200] add_job: requesting-user-name="anze"
D [03/Sep/2026:16:20:04 +0200] Adding default job-sheets values "none,none"...
I [03/Sep/2026:16:20:04 +0200] [Job 13] Adding start banner page "none".
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [03/Sep/2026:16:20:04 +0200] [Job 13] Adding end banner page "none".
I [03/Sep/2026:16:20:04 +0200] [Job 13] File of type application/vnd.cups-pdf-banner queued by "anze".
D [03/Sep/2026:16:20:04 +0200] [Job 13] hold_until=0
I [03/Sep/2026:16:20:04 +0200] [Job 13] Queued on "TS5100_series" by "anze".
D [03/Sep/2026:16:20:04 +0200] [Job 13] time-at-processing=1788445204
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] 3 filters for job:
D [03/Sep/2026:16:20:04 +0200] [Job 13] - (application/vnd.cups-pdf-banner to application/vnd.universal-input, cost 0)
D [03/Sep/2026:16:20:04 +0200] [Job 13] universal (application/vnd.universal-input to application/vnd.cups-raster, cost 0)
D [03/Sep/2026:16:20:04 +0200] [Job 13] rastertocanonij (application/vnd.cups-raster to printer/TS5100_series, cost 0)
D [03/Sep/2026:16:20:04 +0200] [Job 13] job-sheets=none,none
D [03/Sep/2026:16:20:04 +0200] [Job 13] argv[0]="TS5100_series"
D [03/Sep/2026:16:20:04 +0200] [Job 13] argv[1]="13"
D [03/Sep/2026:16:20:04 +0200] [Job 13] argv[2]="anze"
D [03/Sep/2026:16:20:04 +0200] [Job 13] argv[3]="Test Page"
D [03/Sep/2026:16:20:04 +0200] [Job 13] argv[4]="1"
D [03/Sep/2026:16:20:04 +0200] [Job 13] argv[5]="job-uuid=urn:uuid:577792be-fcb8-3019-49fb-489cd8f75511 print-color-mode=monochrome job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1788445204 time-at-processing=1788445204"
D [03/Sep/2026:16:20:04 +0200] [Job 13] argv[6]="/var/spool/cups/d00013-001"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[3]="CUPS_REQUESTROOT=/var/spool/cups"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[4]="CUPS_SERVERBIN=/usr/lib/cups"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[5]="CUPS_SERVERROOT=/etc/cups"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[6]="CUPS_STATEDIR=/run/cups"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[7]="HOME=/var/spool/cups/tmp"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[9]="SERVER_ADMIN=root@GamingStation"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[10]="SOFTWARE=CUPS/2.4.19"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[11]="TMPDIR=/var/spool/cups/tmp"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[12]="USER=root"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[13]="CUPS_MAX_MESSAGE=2047"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[14]="CUPS_SERVER=/run/cups/cups.sock"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[16]="IPP_PORT=631"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[17]="CHARSET=utf-8"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[18]="LANG=en_US.UTF-8"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[19]="PPD=/etc/cups/ppd/TS5100_series.ppd"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[20]="CONTENT_TYPE=application/vnd.cups-pdf-banner"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[21]="DEVICE_URI=socket://192.168.50.110"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[22]="PRINTER_INFO=Canon TS5100 series 3.000"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[23]="PRINTER_LOCATION="
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[24]="PRINTER=TS5100_series"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[25]="PRINTER_STATE_REASONS=none"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[26]="CUPS_FILETYPE=document"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [03/Sep/2026:16:20:04 +0200] [Job 13] envp[28]="AUTH_I****"
I [03/Sep/2026:16:20:04 +0200] [Job 13] Started filter /usr/lib/cups/filter/universal (PID 7069)
I [03/Sep/2026:16:20:04 +0200] [Job 13] Started filter /usr/lib/cups/filter/rastertocanonij (PID 7070)
I [03/Sep/2026:16:20:04 +0200] [Job 13] Started backend /usr/lib/cups/backend/socket (PID 7071)
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] Returning IPP successful-ok for Print-Job (no URI) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 12] Content-Length: 192
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] Expiring subscriptions...
D [03/Sep/2026:16:20:04 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=192, response=0x55f5a67d15d0(IPP_STATE_IDLE), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] bytes=0, http_state=0, data_remaining=192
D [03/Sep/2026:16:20:04 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] JobCreated
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] JobState
D [03/Sep/2026:16:20:04 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 11] 2.0 Get-Jobs 22
D [03/Sep/2026:16:20:04 +0200] Get-Jobs ipp://anze@localhost:631/printers/
D [03/Sep/2026:16:20:04 +0200] [Client 11] Returning IPP successful-ok for Get-Jobs (ipp://anze@localhost:631/printers/) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 11] Content-Length: 479
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 14] Server address is "/run/cups/cups.sock".
D [03/Sep/2026:16:20:04 +0200] [Client 14] Accepted from localhost (Domain)
D [03/Sep/2026:16:20:04 +0200] [Client 14] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 12] 2.0 Get-Printer-Attributes 22
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 12] Content-Length: 717
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=479, response=0x55f5a6807f60(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] bytes=0, http_state=0, data_remaining=479
D [03/Sep/2026:16:20:04 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 14] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 14] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 14] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 14] 2.0 Get-Printer-Attributes 3
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 14] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 14] Content-Length: 280
D [03/Sep/2026:16:20:04 +0200] [Client 14] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=717, response=0x55f5a680e8b0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] bytes=0, http_state=0, data_remaining=717
D [03/Sep/2026:16:20:04 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 11] 2.0 Get-Printer-Attributes 23
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 11] Content-Length: 717
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 14] con->http=0x55f5a67ecd50
D [03/Sep/2026:16:20:04 +0200] [Client 14] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=280, response=0x55f5a67d15d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 14] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 14] bytes=0, http_state=0, data_remaining=280
D [03/Sep/2026:16:20:04 +0200] [Client 14] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 14] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 14] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=717, response=0x55f5a680baf0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] bytes=0, http_state=0, data_remaining=717
D [03/Sep/2026:16:20:04 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: +connecting-to-device
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] Looking up \"192.168.50.110\"...
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -connecting-to-device
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] 192.168.50.110=192.168.50.110
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:04 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 12] 2.0 Get-Printer-Attributes 23
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 12] Content-Length: 717
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=717, response=0x55f5a681feb0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] bytes=0, http_state=0, data_remaining=717
D [03/Sep/2026:16:20:04 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 11] 2.0 Get-Printer-Attributes 24
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 11] Content-Length: 717
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 12] 2.0 Get-Printer-Attributes 24
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 12] Content-Length: 717
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=717, response=0x55f5a681fb70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] bytes=0, http_state=0, data_remaining=717
D [03/Sep/2026:16:20:04 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=717, response=0x55f5a67f83a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] bytes=0, http_state=0, data_remaining=717
D [03/Sep/2026:16:20:04 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 11] 2.0 Get-Printer-Attributes 25
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 11] Content-Length: 717
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=717, response=0x55f5a67f8730(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] bytes=0, http_state=0, data_remaining=717
D [03/Sep/2026:16:20:04 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] ppdFilterLoadPPD: Color profile qualifier determined from job and PPD data \'rgb.plain.600dpi\'
D [03/Sep/2026:16:20:04 +0200] [Job 13] ppdFilterLoadPPD: No ICC profiles specified in PPD
D [03/Sep/2026:16:20:04 +0200] [Job 13] ppdFilterLoadPPD: Searching for profile \"600dpi/plain\"...
D [03/Sep/2026:16:20:04 +0200] [Job 13] ppdFilterLoadPPD: Last filter determined by the PPD: rastertocanonij; Final data MIME type: application/vnd.cups-raster => PDF filter will not log pages in page_log.
D [03/Sep/2026:16:20:04 +0200] [Job 13] ppdFilterUniversal: \"*cupsFilter(2): ...\" lines in the PPD file:
D [03/Sep/2026:16:20:04 +0200] [Job 13] ppdFilterUniversal:    application/vnd.cups-raw application/octet-stream 0 -
D [03/Sep/2026:16:20:04 +0200] [Job 13] ppdFilterUniversal:    application/vnd.cups-raster 0 rastertocanonij
D [03/Sep/2026:16:20:04 +0200] [Job 13] ppdFilterUniversal: PPD uses \"*cupsFilter: ...\" lines, so we always convert to format given by FINAL_CONTENT_TYPE
D [03/Sep/2026:16:20:04 +0200] [Job 13] ppdFilterUniversal: Converting from application/vnd.cups-pdf-banner to application/vnd.cups-raster
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterUniversal: Converting from application/vnd.cups-pdf-banner to application/vnd.cups-raster
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterUniversal: Final output format for job: application/vnd.cups-raster
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterUniversal: Adding bannertopdf to chain
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterUniversal: Adding pdftopdf to chain
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterUniversal: Adding ghostscript to chain
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterChain: Running filter: bannertopdf
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] Set job-printer-state-message to "cfFilterChain: Running filter: bannertopdf", current level=INFO
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterChain: Running filter: pdftopdf
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] Set job-printer-state-message to "cfFilterChain: Running filter: pdftopdf", current level=INFO
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterChain: Running filter: ghostscript
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] Set job-printer-state-message to "cfFilterChain: Running filter: ghostscript", current level=INFO
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] JobProgress
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterChain: bannertopdf (PID 7075) started.
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] Set job-printer-state-message to "cfFilterChain: bannertopdf (PID 7075) started.", current level=INFO
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 12] 2.0 Get-Printer-Attributes 25
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 12] Content-Length: 763
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 11] 2.0 Get-Printer-Attributes 26
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 11] Content-Length: 763
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] JobProgress
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:04 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=763, response=0x55f5a67f9b80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] bytes=0, http_state=0, data_remaining=763
D [03/Sep/2026:16:20:04 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=763, response=0x55f5a67f9c50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] bytes=0, http_state=0, data_remaining=763
D [03/Sep/2026:16:20:04 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterBannerToPDF: Copying input to temp file \"/var/spool/cups/tmp/01ba36aa23f19\"
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterChain: pdftopdf (PID 7076) started.
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] Set job-printer-state-message to "cfFilterChain: pdftopdf (PID 7076) started.", current level=INFO
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 12] 2.0 Get-Printer-Attributes 26
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 12] Content-Length: 760
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 11] 2.0 Get-Printer-Attributes 27
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 11] Content-Length: 760
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterChain: ghostscript (PID 7077) started.
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] Set job-printer-state-message to "cfFilterChain: ghostscript (PID 7077) started.", current level=INFO
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterGhostscript: Output format: CUPS Raster
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterGhostscript: Copying input to temp file \"/var/spool/cups/tmp/01ba56aa24381\"
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] JobProgress
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] JobProgress
D [03/Sep/2026:16:20:04 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=760, response=0x55f5a67fa5a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] bytes=0, http_state=0, data_remaining=760
D [03/Sep/2026:16:20:04 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=760, response=0x55f5a67fa670(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] bytes=0, http_state=0, data_remaining=760
D [03/Sep/2026:16:20:04 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:04 +0200] [Job 13] Opening content stream 1/1...
D [03/Sep/2026:16:20:04 +0200] [Job 13] Opened stream 1
D [03/Sep/2026:16:20:04 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 12] 2.0 Get-Printer-Attributes 27
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 12] Content-Length: 763
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=763, response=0x55f5a67faac0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] bytes=0, http_state=0, data_remaining=763
D [03/Sep/2026:16:20:04 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 11] 2.0 Get-Printer-Attributes 28
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 11] Content-Length: 763
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterChain: bannertopdf completed with status 0.
D [03/Sep/2026:16:20:04 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=763, response=0x55f5a67fa670(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] bytes=0, http_state=0, data_remaining=763
D [03/Sep/2026:16:20:04 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 12] 2.0 Get-Printer-Attributes 28
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 12] Content-Length: 763
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=763, response=0x55f5a67faac0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] bytes=0, http_state=0, data_remaining=763
D [03/Sep/2026:16:20:04 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 11] 2.0 Get-Printer-Attributes 29
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 11] Content-Length: 763
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=763, response=0x55f5a67fa670(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] bytes=0, http_state=0, data_remaining=763
D [03/Sep/2026:16:20:04 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] /usr/bin/tocnpwg: unrecognized option \'--uuid\'
D [03/Sep/2026:16:20:04 +0200] [Job 13] /usr/bin/tocnpwg: unrecognized option \'--jobid\'
D [03/Sep/2026:16:20:04 +0200] [Job 13] /usr/bin/tocnpwg: unrecognized option \'--media\'
D [03/Sep/2026:16:20:04 +0200] [Job 13] /usr/bin/tocnpwg: unrecognized option \'--papersize\'
D [03/Sep/2026:16:20:04 +0200] [Job 13] /usr/bin/tocnpwg: unrecognized option \'--filterpath\'
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterChain: pdftopdf completed with status 1.
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterGhostscript: Input is empty, outputting empty file.
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterChain: ghostscript completed with status 0.
D [03/Sep/2026:16:20:04 +0200] [Job 13] ATTR: marker-colors=#000000,none
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(P----)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] ATTR: marker-names=\'\"Canon Black Ink Tank\"\',\'\"Canon Color Ink Tank\"\'
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(P----)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] ATTR: marker-types=ink-cartridge,ink-cartridge
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(P----)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] ATTR: marker-levels=-1,-1
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(P----)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] new_supply_state=0, change_state=ffff
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -developer-low-report
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -developer-empty-warning
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -marker-supply-low-report
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -marker-supply-empty-warning
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -opc-near-eol-report
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -opc-life-over-warning
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -toner-low-report
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -toner-empty-warning
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -waste-receptacle-almost-full-report
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -waste-receptacle-full-warning
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -cleaner-life-almost-over-report
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -cleaner-life-over-warning
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 12] 2.0 Get-Printer-Attributes 29
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 12] Content-Length: 763
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=763, response=0x55f5a67faf00(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] bytes=0, http_state=0, data_remaining=763
D [03/Sep/2026:16:20:04 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 11] 2.0 Get-Printer-Attributes 30
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 11] Content-Length: 763
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=763, response=0x55f5a67fa470(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] bytes=0, http_state=0, data_remaining=763
D [03/Sep/2026:16:20:04 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] new_state=0, change_state=ffff
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -media-empty-warning
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -door-open-report
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -media-jam-warning
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -input-tray-missing-warning
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -output-tray-missing-warning
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -marker-supply-missing-warning
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -output-area-almost-full-report
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -output-area-full-warning
D [03/Sep/2026:16:20:04 +0200] [Job 13] backendWaitLoop(snmp_fd=5, addr=0x5602318db898, side_cb=0x56022e6f5820)
D [03/Sep/2026:16:20:04 +0200] [Job 13] Connecting to 192.168.50.110:9100
D [03/Sep/2026:16:20:04 +0200] [Job 13] Connecting to printer.
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] Set job-printer-state-message to "Connecting to printer.", current level=INFO
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] JobProgress
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:04 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 11] 2.0 Get-Printer-Attributes 31
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 11] Content-Length: 739
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=739, response=0x55f5a67fc6d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] bytes=0, http_state=0, data_remaining=739
D [03/Sep/2026:16:20:04 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 12] 2.0 Get-Printer-Attributes 30
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 12] Content-Length: 739
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=739, response=0x55f5a67fc360(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] bytes=0, http_state=0, data_remaining=739
D [03/Sep/2026:16:20:04 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] STATE: -connecting-to-device
D [03/Sep/2026:16:20:04 +0200] [Job 13] Connected to printer.
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] Set job-printer-state-message to "Connected to printer.", current level=INFO
D [03/Sep/2026:16:20:04 +0200] [Job 13] Connected to 192.168.50.110:9100...
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] backendRunLoop(print_fd=0, device_fd=6, snmp_fd=5, addr=0x5602318db898, use_bc=1, side_cb=0x56022e6f5820)
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] JobProgress
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:04 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 12] 2.0 Get-Printer-Attributes 31
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 12] Content-Length: 738
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 11] 2.0 Get-Printer-Attributes 32
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 11] Content-Length: 738
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=738, response=0x55f5a67fd3d0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] bytes=0, http_state=0, data_remaining=738
D [03/Sep/2026:16:20:04 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=738, response=0x55f5a67fd4a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] bytes=0, http_state=0, data_remaining=738
D [03/Sep/2026:16:20:04 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] Read 503 bytes of print data...
D [03/Sep/2026:16:20:04 +0200] [Job 13] ATTR: marker-levels=-1,-1
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(P----)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] new_supply_state=0, change_state=0
D [03/Sep/2026:16:20:04 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:04 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:04 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 11] 2.0 Get-Printer-Attributes 33
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 11] Content-Length: 738
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:04 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:04 +0200] [Client 12] 2.0 Get-Printer-Attributes 32
D [03/Sep/2026:16:20:04 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:04 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:04 +0200] [Client 12] Content-Length: 738
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:04 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=738, response=0x55f5a67fcf00(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 11] bytes=0, http_state=0, data_remaining=738
D [03/Sep/2026:16:20:04 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:04 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=738, response=0x55f5a67fdaf0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:04 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:04 +0200] [Client 12] bytes=0, http_state=0, data_remaining=738
D [03/Sep/2026:16:20:04 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:04 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:04 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:04 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:04 +0200] [Job 13] new_state=0, change_state=0
D [03/Sep/2026:16:20:04 +0200] [Job 13] Wrote 503 bytes of print data...
D [03/Sep/2026:16:20:05 +0200] [Job 13] cfFilterChain: bannertopdf (PID 7075) exited with no errors.
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Job 13] Set job-printer-state-message to "cfFilterChain: bannertopdf (PID 7075) exited with no errors.", current level=INFO
E [03/Sep/2026:16:20:05 +0200] [Job 13] cfFilterChain: pdftopdf (PID 7076) stopped with status 1
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Job 13] Set job-printer-state-message to "cfFilterChain: pdftopdf (PID 7076) stopped with status 1", current level=ERROR
D [03/Sep/2026:16:20:05 +0200] [Job 13] cfFilterChain: ghostscript (PID 7077) exited with no errors.
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] Expiring subscriptions...
E [03/Sep/2026:16:20:05 +0200] [Job 13] universal filter failed.
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Notifier] JobProgress
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Notifier] JobProgress
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:05 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:05 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:05 +0200] [Client 11] 2.0 Get-Printer-Attributes 34
D [03/Sep/2026:16:20:05 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:05 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:05 +0200] [Client 11] Content-Length: 741
D [03/Sep/2026:16:20:05 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:05 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:05 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:05 +0200] [Client 12] 2.0 Get-Printer-Attributes 33
D [03/Sep/2026:16:20:05 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:05 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:05 +0200] [Client 12] Content-Length: 741
D [03/Sep/2026:16:20:05 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:05 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:05 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=741, response=0x55f5a67ff460(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:05 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:05 +0200] [Client 11] bytes=0, http_state=0, data_remaining=741
D [03/Sep/2026:16:20:05 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:05 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:05 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:05 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=741, response=0x55f5a67ff4f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:05 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:05 +0200] [Client 12] bytes=0, http_state=0, data_remaining=741
D [03/Sep/2026:16:20:05 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:05 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:05 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Job 13] PID 7069 (/usr/lib/cups/filter/universal) stopped with status 1.
D [03/Sep/2026:16:20:05 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:05 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:05 +0200] [Client 11] 2.0 Get-Printer-Attributes 35
D [03/Sep/2026:16:20:05 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:05 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:05 +0200] [Client 11] Content-Length: 741
D [03/Sep/2026:16:20:05 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:05 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:05 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=741, response=0x55f5a67ff7c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:05 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:05 +0200] [Client 11] bytes=0, http_state=0, data_remaining=741
D [03/Sep/2026:16:20:05 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:05 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:05 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:05 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:05 +0200] [Client 12] 2.0 Get-Printer-Attributes 34
D [03/Sep/2026:16:20:05 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:05 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:05 +0200] [Client 12] Content-Length: 741
D [03/Sep/2026:16:20:05 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:05 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:05 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=741, response=0x55f5a67ff4f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:05 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:05 +0200] [Client 12] bytes=0, http_state=0, data_remaining=741
D [03/Sep/2026:16:20:05 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:05 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:05 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Job 13] getEndJobCommand Successed
D [03/Sep/2026:16:20:05 +0200] [Job 13] Read 263 bytes of print data...
D [03/Sep/2026:16:20:05 +0200] [Job 13] Wrote 263 bytes of print data...
D [03/Sep/2026:16:20:05 +0200] [Job 13] STATE: +cups-waiting-for-job-completed
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(P----)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Job 13] Waiting for printer to finish.
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Job 13] PID 7070 (/usr/lib/cups/filter/rastertocanonij) exited with no errors.
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Notifier] JobProgress
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:05 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:05 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:05 +0200] [Client 11] 2.0 Get-Printer-Attributes 36
D [03/Sep/2026:16:20:05 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:05 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:05 +0200] [Client 11] Content-Length: 747
D [03/Sep/2026:16:20:05 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:05 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:05 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=747, response=0x55f5a67ffd80(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:05 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:05 +0200] [Client 11] bytes=0, http_state=0, data_remaining=747
D [03/Sep/2026:16:20:05 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:05 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:05 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:05 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:05 +0200] [Client 12] 2.0 Get-Printer-Attributes 35
D [03/Sep/2026:16:20:05 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:05 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:05 +0200] [Client 12] Content-Length: 747
D [03/Sep/2026:16:20:05 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:05 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:05 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=747, response=0x55f5a67fee10(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:05 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:05 +0200] [Client 12] bytes=0, http_state=0, data_remaining=747
D [03/Sep/2026:16:20:05 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:05 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:05 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Job 13] ATTR: marker-levels=-1,-1
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(P----)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Job 13] new_supply_state=0, change_state=0
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:05 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:05 +0200] [Client 12] 2.0 Get-Printer-Attributes 36
D [03/Sep/2026:16:20:05 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:05 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:05 +0200] [Client 12] Content-Length: 747
D [03/Sep/2026:16:20:05 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:05 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:05 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=747, response=0x55f5a6800510(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:05 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:05 +0200] [Client 12] bytes=0, http_state=0, data_remaining=747
D [03/Sep/2026:16:20:05 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:05 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:05 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:05 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:05 +0200] [Client 11] 2.0 Get-Printer-Attributes 37
D [03/Sep/2026:16:20:05 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:05 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:05 +0200] [Client 11] Content-Length: 747
D [03/Sep/2026:16:20:05 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:05 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:05 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=747, response=0x55f5a68001a0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:05 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:05 +0200] [Client 11] bytes=0, http_state=0, data_remaining=747
D [03/Sep/2026:16:20:05 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:05 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:05 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Job 13] new_state=0, change_state=0
D [03/Sep/2026:16:20:05 +0200] [Job 13] PID 7071 (/usr/lib/cups/backend/socket) exited with no errors.
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(P----)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
E [03/Sep/2026:16:20:05 +0200] [Job 13] Job stopped due to filter errors; please consult the /var/log/cups/error_log file for details.
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] cupsdMarkDirty(---J-)
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Job 13] The following messages were recorded from 04:20:04 PM to 04:20:05 PM
D [03/Sep/2026:16:20:05 +0200] [Job 13] hrDeviceDesc=\"Canon TS5100 series 3.000\"
D [03/Sep/2026:16:20:05 +0200] [Job 13] prtMarkerColorantValue.1.1 = \"black\"
D [03/Sep/2026:16:20:05 +0200] [Job 13] prtMarkerColorantValue.1.2 = \"color\"
D [03/Sep/2026:16:20:05 +0200] [Job 13] prtMarkerSuppliesLevel.1.1 = -2
D [03/Sep/2026:16:20:05 +0200] [Job 13] prtMarkerSuppliesLevel.1.2 = -2
D [03/Sep/2026:16:20:05 +0200] [Job 13] prtMarkerSuppliesLevel.1.1 = -2
D [03/Sep/2026:16:20:05 +0200] [Job 13] prtMarkerSuppliesLevel.1.2 = -2
D [03/Sep/2026:16:20:05 +0200] [Job 13] End of messages
D [03/Sep/2026:16:20:05 +0200] [Job 13] printer-state=3(idle)
D [03/Sep/2026:16:20:05 +0200] [Job 13] printer-state-message="Waiting for printer to finish."
D [03/Sep/2026:16:20:05 +0200] [Job 13] printer-state-reasons=none
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Notifier] JobState
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Notifier] state=3
D [03/Sep/2026:16:20:05 +0200] [Notifier] PrinterStateChanged
D [03/Sep/2026:16:20:05 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Printing jobs and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:05 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:05 +0200] [Client 11] 2.0 Get-Jobs 38
D [03/Sep/2026:16:20:05 +0200] Get-Jobs ipp://anze@localhost:631/printers/
D [03/Sep/2026:16:20:05 +0200] [Client 11] Returning IPP successful-ok for Get-Jobs (ipp://anze@localhost:631/printers/) from localhost.
D [03/Sep/2026:16:20:05 +0200] [Client 11] Content-Length: 597
D [03/Sep/2026:16:20:05 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:05 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:05 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=597, response=0x55f5a67faac0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:05 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:05 +0200] [Client 11] bytes=0, http_state=0, data_remaining=597
D [03/Sep/2026:16:20:05 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:05 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:05 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 12] POST / HTTP/1.1
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 12] Read: status=200, state=6
D [03/Sep/2026:16:20:05 +0200] [Client 12] No authentication data provided.
D [03/Sep/2026:16:20:05 +0200] [Client 12] 2.0 Get-Printer-Attributes 37
D [03/Sep/2026:16:20:05 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:05 +0200] [Client 12] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:05 +0200] [Client 12] Content-Length: 747
D [03/Sep/2026:16:20:05 +0200] [Client 12] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:05 +0200] [Client 12] con->http=0x55f5a6811480
D [03/Sep/2026:16:20:05 +0200] [Client 12] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=747, response=0x55f5a67faa40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:05 +0200] [Client 12] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:05 +0200] [Client 12] bytes=0, http_state=0, data_remaining=747
D [03/Sep/2026:16:20:05 +0200] [Client 12] Flushing write buffer.
D [03/Sep/2026:16:20:05 +0200] [Client 12] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:05 +0200] [Client 12] Waiting for request.
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 11] POST / HTTP/1.1
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Sep/2026:16:20:05 +0200] [Client 11] Read: status=200, state=6
D [03/Sep/2026:16:20:05 +0200] [Client 11] No authentication data provided.
D [03/Sep/2026:16:20:05 +0200] [Client 11] 2.0 Get-Printer-Attributes 39
D [03/Sep/2026:16:20:05 +0200] Get-Printer-Attributes ipp://anze@localhost:631/printers/TS5100_series
D [03/Sep/2026:16:20:05 +0200] [Client 11] Returning IPP successful-ok for Get-Printer-Attributes (ipp://anze@localhost:631/printers/TS5100_series) from localhost.
D [03/Sep/2026:16:20:05 +0200] [Client 11] Content-Length: 747
D [03/Sep/2026:16:20:05 +0200] [Client 11] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:05 +0200] [Client 11] con->http=0x55f5a67e0530
D [03/Sep/2026:16:20:05 +0200] [Client 11] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=747, response=0x55f5a67faac0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:05 +0200] [Client 11] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:05 +0200] [Client 11] bytes=0, http_state=0, data_remaining=747
D [03/Sep/2026:16:20:05 +0200] [Client 11] Flushing write buffer.
D [03/Sep/2026:16:20:05 +0200] [Client 11] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:05 +0200] [Client 11] Waiting for request.
D [03/Sep/2026:16:20:05 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:06 +0200] Expiring subscriptions...
D [03/Sep/2026:16:20:06 +0200] [Job 13] Unloading...
D [03/Sep/2026:16:20:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Sep/2026:16:20:08 +0200] [Client 15] Server address is "/run/cups/cups.sock".
D [03/Sep/2026:16:20:08 +0200] [Client 15] Accepted from localhost (Domain)
D [03/Sep/2026:16:20:08 +0200] [Client 15] Waiting for request.
D [03/Sep/2026:16:20:08 +0200] Expiring subscriptions...
D [03/Sep/2026:16:20:08 +0200] [Client 15] POST / HTTP/1.1
D [03/Sep/2026:16:20:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:08 +0200] [Client 15] Read: status=200, state=6
D [03/Sep/2026:16:20:08 +0200] [Client 15] No authentication data provided.
D [03/Sep/2026:16:20:08 +0200] [Client 15] 2.0 CUPS-Get-Printers 1
D [03/Sep/2026:16:20:08 +0200] CUPS-Get-Printers
D [03/Sep/2026:16:20:08 +0200] [Client 15] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [03/Sep/2026:16:20:08 +0200] [Client 15] Content-Length: 747
D [03/Sep/2026:16:20:08 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:08 +0200] [Client 15] con->http=0x55f5a6820470
D [03/Sep/2026:16:20:08 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=747, response=0x55f5a67fdf40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:08 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:08 +0200] [Client 15] bytes=0, http_state=0, data_remaining=747
D [03/Sep/2026:16:20:08 +0200] [Client 15] Flushing write buffer.
D [03/Sep/2026:16:20:08 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:08 +0200] [Client 15] Waiting for request.
D [03/Sep/2026:16:20:08 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:08 +0200] [Client 15] POST / HTTP/1.1
D [03/Sep/2026:16:20:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Sep/2026:16:20:08 +0200] [Client 15] Read: status=200, state=6
D [03/Sep/2026:16:20:08 +0200] [Client 15] No authentication data provided.
D [03/Sep/2026:16:20:08 +0200] [Client 15] 2.0 Get-Jobs 2
D [03/Sep/2026:16:20:08 +0200] Get-Jobs ipp://anze@localhost:631/printers/
D [03/Sep/2026:16:20:08 +0200] [Job 13] Loading attributes...
D [03/Sep/2026:16:20:08 +0200] [Client 15] Returning IPP successful-ok for Get-Jobs (ipp://anze@localhost:631/printers/) from localhost.
D [03/Sep/2026:16:20:08 +0200] [Client 15] Content-Length: 597
D [03/Sep/2026:16:20:08 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:08 +0200] [Client 15] con->http=0x55f5a6820470
D [03/Sep/2026:16:20:08 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=597, response=0x55f5a67d9370(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:08 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:08 +0200] [Client 15] bytes=0, http_state=0, data_remaining=597
D [03/Sep/2026:16:20:08 +0200] [Client 15] Flushing write buffer.
D [03/Sep/2026:16:20:08 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:08 +0200] [Client 15] Waiting for request.
D [03/Sep/2026:16:20:08 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:08 +0200] [Client 15] POST / HTTP/1.1
D [03/Sep/2026:16:20:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [03/Sep/2026:16:20:08 +0200] [Client 15] Read: status=200, state=6
D [03/Sep/2026:16:20:08 +0200] [Client 15] No authentication data provided.
D [03/Sep/2026:16:20:08 +0200] [Client 15] 2.0 Create-Printer-Subscriptions 3
D [03/Sep/2026:16:20:08 +0200] Create-Printer-Subscriptions ipp://localhost/
D [03/Sep/2026:16:20:08 +0200] create_subscriptions(con=0x55f5a6800a70(15), uri="ipp://localhost/")
D [03/Sep/2026:16:20:08 +0200] recipient="dbus://"
D [03/Sep/2026:16:20:08 +0200] notify-lease-duration=3600
D [03/Sep/2026:16:20:08 +0200] notify-time-interval=0
D [03/Sep/2026:16:20:08 +0200] cupsdAddSubscription(mask=1ffb8f, dest=(nil)(), job=(nil)(0), uri="dbus://")
D [03/Sep/2026:16:20:08 +0200] Added subscription #46 for server.
D [03/Sep/2026:16:20:08 +0200] cupsdMarkDirty(----S)
D [03/Sep/2026:16:20:08 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:08 +0200] [Client 15] Returning IPP successful-ok for Create-Printer-Subscriptions (ipp://localhost/) from localhost.
D [03/Sep/2026:16:20:08 +0200] [Client 15] Content-Length: 583
D [03/Sep/2026:16:20:08 +0200] [Client 15] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [03/Sep/2026:16:20:08 +0200] [Client 15] con->http=0x55f5a6820470
D [03/Sep/2026:16:20:08 +0200] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=583, response=0x55f5a67fdf40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [03/Sep/2026:16:20:08 +0200] [Client 15] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [03/Sep/2026:16:20:08 +0200] [Client 15] bytes=0, http_state=0, data_remaining=583
D [03/Sep/2026:16:20:08 +0200] [Client 15] Flushing write buffer.
D [03/Sep/2026:16:20:08 +0200] [Client 15] New state is HTTP_STATE_WAITING
D [03/Sep/2026:16:20:08 +0200] [Client 15] Waiting for request.
D [03/Sep/2026:16:20:08 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [03/Sep/2026:16:20:09 +0200] Expiring subscriptions...

seth · 2026-09-03 14:44:32

A lot of the output is from the cups http daemon ( http://localhost:631 ) - did you try to print the testpage from there?
You care about the "[Job 13]" lines which has

D [03/Sep/2026:16:20:04 +0200] [Job 13] /usr/bin/tocnpwg: unrecognized option \'--uuid\'
D [03/Sep/2026:16:20:04 +0200] [Job 13] /usr/bin/tocnpwg: unrecognized option \'--jobid\'
D [03/Sep/2026:16:20:04 +0200] [Job 13] /usr/bin/tocnpwg: unrecognized option \'--media\'
D [03/Sep/2026:16:20:04 +0200] [Job 13] /usr/bin/tocnpwg: unrecognized option \'--papersize\'
D [03/Sep/2026:16:20:04 +0200] [Job 13] /usr/bin/tocnpwg: unrecognized option \'--filterpath\'
D [03/Sep/2026:16:20:04 +0200] [Job 13] cfFilterChain: pdftopdf completed with status 1.

I suspect

pacman -Qo tocnpwg

is from your AUR printer driver?

seth wrote:

For IPPe:
nmap 192.168.50.110

If you can use IPPe you can side-step the problems w/ badly maintained drivers.

https://www.canon.de/printers/pixma-ts5 … fications/ says AirPrint (which is IPPe, just cooler name) is supported but on some printers you've to activate that.
You'll also need https://archlinux.org/packages/extra/x86_64/cups-pdf/

rossboulet · 2026-09-03 20:56:39

I had the same issue on at least two machines, one of which had been printing with IPP all along. I did a "systemctl status cups" and saw a crash that seemed to implicate libcupsfilters. Sure enough libcupsfilters had recently been upgraded on the systems in question. I downgraded libcupsfilters from 2.2.1-2 to 2.1.1-4 and printing works again. I was failing on the test page in pdftopdf and attempting to print a text file failed in texttopdf.

Edited: corrected 2.2.1-4 --> 2.2.1-2

Last edited by rossboulet (2026-09-04 06:56:44)

seth · 2026-09-03 21:25:54

Oh, thanks for the heads up.
They completely rewrote that filter…
https://github.com/OpenPrinting/libcups … 5463504959

Arch already applies a downstream patch, https://gitlab.archlinux.org/archlinux/ … 1766c769d1 but there're obviously bigger problems.

@AtaSmrk007 see https://wiki.archlinux.org/title/Arch_Linux_Archive on how to downgrade packages.

AtaSmrk007 · 2026-09-04 07:13:33

Thank you very much for your help. Downgrading the libcupsfilters package fixed the problem.

rossboulet · 2026-09-04 21:07:00

Well, I wouldn't really call it solved. Your immediate problem is solved, but there is still and outstanding issue with the current version of libcupsfilters. I will open a new topic to make sure this gets addressed.

lomov_vl · 2026-09-05 03:33:17

I'm experiencing the same problem here with HP LaserJet MFP 125nrw; downgrading libcupsfilters to 2.1.1-4 helped.

resurtm · 2026-09-07 11:07:12

Confirmed issue and temporary fix with Brother DCP-J1200W + IPP Everywhere. Stable Arch, AUR not used.

Last edited by resurtm (2026-09-07 11:09:18)

dreieck · 2026-09-21 08:06:23

Ah, that's why I also cannot print since at least 1.5 weeks.

Some printer drivers will never get updates but are needed to get printers to work.

Can there be a "compatibility" package created that restores functionality of those drivers?

Regards!

dreieck · 2026-09-21 08:09:48

rossboulet wrote:

I will open a new topic to make sure this gets addressed.

Can you link to it, please?

Regards!

seth · 2026-09-21 13:19:38

What version of libcupsfilters and cups-filters do you currently used?

1½ weeks ago (10 days, more specifically) and in the aftermath of the (still looming, but slightly older) pdfio disaster the universal filter was replaced by upstream suggestion:
https://gitlab.archlinux.org/archlinux/ … 5c366cf7b6

rossboulet · 2026-09-22 19:12:14

dreieck wrote:

rossboulet wrote:
I will open a new topic to make sure this gets addressed.
Can you link to it, please?
Regards!

I got sidetracked before I posted. I also ran in to one inconsistency where a regular text file seemed to be okay but the cups test page still failed. I will try to test again and see where I stand.

dreieck · 2026-09-23 20:45:47

seth wrote:

What version of libcupsfilters and cups-filters do you currently used?

Currently:

* libcupsfilters: 2.2.1-2,
* cups-filters: 2.0.1-3,
* ghostscript: 10.08.0-1,
* hplip: 1:3.26.6-1.

Printer is a HP Photosmart 7520 with "hplip" driver. Excerpt from `/etc/cups/printers.conf`:

<DefaultPrinter Photosmart_7520_IP-12>
PrinterId 2
UUID urn:uuid:1e<CENSORED>88
Info HP PhotoSmart 7520 (IP .12)
Location home
MakeModel HP Photosmart 7520 Series, hpcups 3.23.5
DeviceURI hp:/net/Photosmart_7520_series?hostname=hp7520-12
State Idle
StateTime 1790193384
ConfigTime 1716635463
Type 36892
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
Option print-color-mode monochrome
</DefaultPrinter>

("<CENSORED>" is a censoring I have made.),
and the `/etc/cups/ppd/Photosmart_7520_IP-12.ppd`:

*PPD-Adobe: "4.3"
*%%%% PPD file for HP Photosmart 7520 Series with CUPS.
*%%%% Created by the CUPS PPD Compiler CUPS v2.4.6.
*% (c) 2008 Copyright HP Development Company, LP
*FormatVersion: "4.3"
*FileVersion: "3.23.5"
*LanguageVersion: English
*LanguageEncoding: ISOLatin1
*PCFileName: "hp-photosmart_7520_series.ppd"
*Product: "(HP Photosmart 7520 E-all-in-one)"
*Product: "(HP Photosmart 7525 E-all-in-one)"
*Manufacturer: "HP"
*ModelName: "HP Photosmart 7520 Series"
*ShortNickName: "HP Photosmart 7520 Series hpijs"
*NickName: "HP Photosmart 7520 Series, hpcups 3.23.5"
*PSVersion: "(3010.000) 0"
*LanguageLevel: "3"
*ColorDevice: True
*DefaultColorSpace: RGB
*FileSystem: False
*Throughput: "1"
*LandscapeOrientation: Plus90
*TTRasterizer: Type42
*% Driver-defined attributes...
*RequiresPageRegion All: True
*cupsEvenDuplex: True
*cupsBackSide: "Rotated"
*cupsFlipDuplex: True
*hpPrinterLanguage: "pcl3gui2"
*HPMechOffset: "69"
*1284DeviceID: "MFG:HP;MDL:photosmart 7520 series;DES:photosmart 7520 series;"
*cupsVersion: 2.4
*cupsModelNumber: 0
*cupsManualCopies: True
*cupsFilter: "application/vnd.cups-raster 0 hpcups"
*cupsLanguages: "en"
*UIConstraints: *MediaType Automatic *OutputMode FastDraft
*UIConstraints: *OutputMode FastDraft *MediaType Automatic
*UIConstraints: *MediaType Glossy *OutputMode FastDraft
*UIConstraints: *OutputMode FastDraft *MediaType Glossy
*UIConstraints: *MediaType TransparencyFilm *OutputMode FastDraft
*UIConstraints: *OutputMode FastDraft *MediaType TransparencyFilm
*UIConstraints: *MediaType TransparencyFilm *OutputMode Best
*UIConstraints: *OutputMode Best *MediaType TransparencyFilm
*UIConstraints: *PageSize Card3x5 *Duplex
*UIConstraints: *Duplex *PageSize Card3x5
*UIConstraints: *PageSize PhotoL *Duplex
*UIConstraints: *Duplex *PageSize PhotoL
*UIConstraints: *PageSize PhotoL.FB *Duplex
*UIConstraints: *Duplex *PageSize PhotoL.FB
*UIConstraints: *PageSize Hagaki *Duplex
*UIConstraints: *Duplex *PageSize Hagaki
*UIConstraints: *PageSize Hagaki.FB *Duplex
*UIConstraints: *Duplex *PageSize Hagaki.FB
*UIConstraints: *PageSize Card4x6 *Duplex
*UIConstraints: *Duplex *PageSize Card4x6
*UIConstraints: *PageSize Photo4x6 *Duplex
*UIConstraints: *Duplex *PageSize Photo4x6
*UIConstraints: *PageSize Photo4x6.FB *Duplex
*UIConstraints: *Duplex *PageSize Photo4x6.FB
*UIConstraints: *PageSize A6 *Duplex
*UIConstraints: *Duplex *PageSize A6
*UIConstraints: *PageSize A6.FB *Duplex
*UIConstraints: *Duplex *PageSize A6.FB
*UIConstraints: *PageSize Photo5x7 *Duplex
*UIConstraints: *Duplex *PageSize Photo5x7
*UIConstraints: *PageSize Photo5x7.FB *Duplex
*UIConstraints: *Duplex *PageSize Photo5x7.FB
*UIConstraints: *PageSize Photo2L *Duplex
*UIConstraints: *Duplex *PageSize Photo2L
*UIConstraints: *PageSize Photo2L.FB *Duplex
*UIConstraints: *Duplex *PageSize Photo2L.FB
*UIConstraints: *PageSize Card5x8 *Duplex
*UIConstraints: *Duplex *PageSize Card5x8
*UIConstraints: *PageSize Ofuku *Duplex
*UIConstraints: *Duplex *PageSize Ofuku
*UIConstraints: *PageSize A5 *Duplex
*UIConstraints: *Duplex *PageSize A5
*UIConstraints: *PageSize A5.FB *Duplex
*UIConstraints: *Duplex *PageSize A5.FB
*UIConstraints: *PageSize B5 *Duplex
*UIConstraints: *Duplex *PageSize B5
*UIConstraints: *PageSize JB5 *Duplex
*UIConstraints: *Duplex *PageSize JB5
*UIConstraints: *PageSize Letter.FB *Duplex
*UIConstraints: *Duplex *PageSize Letter.FB
*UIConstraints: *PageSize A4.FB *Duplex
*UIConstraints: *Duplex *PageSize A4.FB
*UIConstraints: *PageSize EnvA2 *Duplex
*UIConstraints: *Duplex *PageSize EnvA2
*UIConstraints: *PageSize EnvC6 *Duplex
*UIConstraints: *Duplex *PageSize EnvC6
*UIConstraints: *PageSize EnvChou4 *Duplex
*UIConstraints: *Duplex *PageSize EnvChou4
*UIConstraints: *PageSize Env6 *Duplex
*UIConstraints: *Duplex *PageSize Env6
*UIConstraints: *PageSize EnvCard *Duplex
*UIConstraints: *Duplex *PageSize EnvCard
*UIConstraints: *PageSize EnvMonarch *Duplex
*UIConstraints: *Duplex *PageSize EnvMonarch
*UIConstraints: *PageSize EnvDL *Duplex
*UIConstraints: *Duplex *PageSize EnvDL
*UIConstraints: *PageSize Env10 *Duplex
*UIConstraints: *Duplex *PageSize Env10
*UIConstraints: *PageSize EnvChou3 *Duplex
*UIConstraints: *Duplex *PageSize EnvChou3
*UIConstraints: *PageSize EnvC5 *Duplex
*UIConstraints: *Duplex *PageSize EnvC5
*UIConstraints: *PageSize PhotoL.FB *OutputMode FastDraft
*UIConstraints: *OutputMode FastDraft *PageSize PhotoL.FB
*UIConstraints: *PageSize L.FB *OutputMode FastDraft
*UIConstraints: *OutputMode FastDraft *PageSize L.FB
*UIConstraints: *PageSize Hagaki.FB *OutputMode FastDraft
*UIConstraints: *OutputMode FastDraft *PageSize Hagaki.FB
*UIConstraints: *PageSize Photo4x6.FB *OutputMode FastDraft
*UIConstraints: *OutputMode FastDraft *PageSize Photo4x6.FB
*UIConstraints: *PageSize A6.FB *OutputMode FastDraft
*UIConstraints: *OutputMode FastDraft *PageSize A6.FB
*UIConstraints: *PageSize Photo5x7.FB *OutputMode FastDraft
*UIConstraints: *OutputMode FastDraft *PageSize Photo5x7.FB
*UIConstraints: *PageSize Photo2L.FB *OutputMode FastDraft
*UIConstraints: *OutputMode FastDraft *PageSize Photo2L.FB
*UIConstraints: *PageSize A5.FB *OutputMode FastDraft
*UIConstraints: *OutputMode FastDraft *PageSize A5.FB
*UIConstraints: *PageSize Letter.FB *OutputMode FastDraft
*UIConstraints: *OutputMode FastDraft *PageSize Letter.FB
*UIConstraints: *PageSize A4.FB *OutputMode FastDraft
*UIConstraints: *OutputMode FastDraft *PageSize A4.FB
*OpenUI *PageSize/Media Size: PickOne
*OrderDependency: 10 AnySetup *PageSize
*DefaultPageSize: A4
*PageSize Card3x5/Index Card 3x5in: "<</cupsInteger0 78/PageSize [216 360]/ImagingBBox null>>setpagedevice"
*PageSize PhotoL/Photo 3.5x5in: "<</cupsInteger0 121/PageSize[252 360]/ImagingBBox null>>setpagedevice"
*PageSize PhotoL.FB/Photo Borderless 3.5x5in: "<</cupsInteger0 121/PageSize[264.744 374.112]/ImagingBBox null>>setpagedevice"
*PageSize L/L 89x127mm: "<</cupsInteger0 121/PageSize[252 360]/ImagingBBox null>>setpagedevice"
*PageSize L.FB/L Borderless 89x127mm: "<</cupsInteger0 121/PageSize[264.744 374.112]/ImagingBBox null>>setpagedevice"
*PageSize Hagaki/Hagaki 100x148mm: "<</cupsInteger0 71/PageSize[283.68 419.76]/ImagingBBox null>>setpagedevice"
*PageSize Hagaki.FB/Hagaki Borderless 100x148mm: "<</cupsInteger0 71/PageSize[296.424 433.872]/ImagingBBox null>>setpagedevice"
*PageSize Card4x6/Index Card 4x6in: "<</cupsInteger0 74/PageSize[288 432]/ImagingBBox null>>setpagedevice"
*PageSize Photo4x6/Photo 4x6in: "<</cupsInteger0 74/PageSize[288 432]/ImagingBBox null>>setpagedevice"
*PageSize Photo4x6.FB/Photo Borderless 4x6in: "<</cupsInteger0 74/PageSize[303.552 446.112]/ImagingBBox null>>setpagedevice"
*PageSize Photo4x6tab/Photo 4x6in (tab): "<</cupsInteger0 74/PageSize[288 432]/ImagingBBox null>>setpagedevice"
*PageSize Photo4x6tab.FB/Photo Borderless 4x6in (tab): "<</cupsInteger0 74/PageSize[303.55 446.11]/ImagingBBox null>>setpagedevice"
*PageSize A6/A6 105x148mm: "<</cupsInteger0 73/PageSize[297.36 419.76]/ImagingBBox null>>setpagedevice"
*PageSize A6.FB/A6 Borderless 105x148mm: "<</cupsInteger0 73/PageSize[310.104 433.872]/ImagingBBox null>>setpagedevice"
*PageSize Photo5x7/Photo 5x7in: "<</cupsInteger0 122/PageSize[360 504]/ImagingBBox null>>setpagedevice"
*PageSize Photo5x7.FB/Photo Borderless 5x7in: "<</cupsInteger0 122/PageSize[372.816 518.112]/ImagingBBox null>>setpagedevice"
*PageSize Photo2L/Photo 2L 127x178mm: "<</cupsInteger0 126/PageSize[360 504]/ImagingBBox null>>setpagedevice"
*PageSize Photo2L.FB/Photo 2L Borderless 127x178mm: "<</cupsInteger0 126/PageSize[372.816 518.112]/ImagingBBox null>>setpagedevice"
*PageSize Card5x8/Index Card 5x8in: "<</cupsInteger0 75/PageSize[360 576]/ImagingBBox null>>setpagedevice"
*PageSize Ofuku/Ofuku-Hagaki 200x148mm: "<</cupsInteger0 72/PageSize[566.64 419.76]/ImagingBBox null>>setpagedevice"
*PageSize A5/A5 148x210mm: "<</cupsInteger0 25/PageSize[419.76 595.44]/ImagingBBox null>>setpagedevice"
*PageSize A5.FB/A5 Borderless 148x210mm: "<</cupsInteger0 25/PageSize[435.312 609.552]/ImagingBBox null>>setpagedevice"
*PageSize B5/B5 176x250mm: "<</cupsInteger0 65/PageSize[498.96 708.48]/ImagingBBox null>>setpagedevice"
*PageSize B5.Duplex/B5 AutoDuplex 176x250mm: "<</cupsInteger0 65/PageSize[498.96 699.48]/ImagingBBox null>>setpagedevice"
*PageSize JB5/JB5 182x257mm: "<</cupsInteger0 45/PageSize[516.24 728.64]/ImagingBBox null>>setpagedevice"
*PageSize JB5.Duplex/JB5 AutoDuplex 182x257mm: "<</cupsInteger0 45/PageSize[516.24 719.64]/ImagingBBox null>>setpagedevice"
*PageSize Executive/Executive 7.25x10.5in: "<</cupsInteger0 1/PageSize[522 756]/ImagingBBox null>>setpagedevice"
*PageSize Executive.Duplex/Executive AutoDuplex 7.25x10.5in: "<</cupsInteger0 1/PageSize[522 747]/ImagingBBox null>>setpagedevice"
*PageSize 8x10/8x10in: "<</cupsInteger0 7/PageSize[576 720]/ImagingBBox null>>setpagedevice"
*PageSize 8x10.FB/Borderless 8x10in: "<</cupsInteger0 7/PageSize[591.552 734.112]/ImagingBBox null>>setpagedevice"
*PageSize Letter/Letter 8.5x11in: "<</cupsInteger0 2/PageSize[612 792]/ImagingBBox null>>setpagedevice"
*PageSize Letter.FB/Letter Borderless 8.5x11in: "<</cupsInteger0 2/PageSize[627.552 806.112]/ImagingBBox null>>setpagedevice"
*PageSize Letter.Duplex/Letter AutoDuplex 8.5x11in: "<</cupsInteger0 2/PageSize[612 783]/ImagingBBox null>>setpagedevice"
*PageSize A4/A4 210x297mm: "<</cupsInteger0 26/PageSize[595.44 841.68]/ImagingBBox null>>setpagedevice"
*PageSize A4.FB/A4 Borderless 210x297mm: "<</cupsInteger0 26/PageSize[610.992 855.792]/ImagingBBox null>>setpagedevice"
*PageSize A4.Duplex/A4 AutoDuplex 210x297mm: "<</cupsInteger0 26/PageSize[595.44 832.68]/ImagingBBox null>>setpagedevice"
*PageSize Legal/Legal 8.5x14in: "<</cupsInteger0 3/PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageSize Photo10x15/Photo 10x15cm: "<</cupsInteger0 74/PageSize[288 432]/ImagingBBox null>>setpagedevice"
*PageSize Photo10x15.FB/Borderless Photo 10x15cm: "<</cupsInteger0 74/cupsReal0 .098/cupsReal1 .098/PageSize[303.552 446.112]/ImagingBBox null>>setpagedevice"
*PageSize Photo10x15tab/Photo 10x15cm (tab): "<</cupsInteger0 74/PageSize[288 432]/ImagingBBox null>>setpagedevice"
*PageSize Photo10x15tab.FB/ Borderless Photo 10x15cm (tab): "<</cupsInteger0 74/cupsReal0 .098/cupsReal1 .098/PageSize[303.552 446.112]/ImagingBBox null>>setpagedevice"
*PageSize Photo13x18/Photo 13x18cm: "<</cupsInteger0 122/PageSize[360 504]/ImagingBBox null>>setpagedevice"
*PageSize Photo13x18.FB/Borderless Photo 13x18cm: "<</cupsInteger0 122/PageSize[372.816 518.112]/ImagingBBox null>>setpagedevice"
*PageSize EnvA2/A2 Envelope 4.37x5.75in: "<</cupsInteger0 109/PageSize[314.64 414]/ImagingBBox null>>setpagedevice"
*PageSize EnvC6/C6 Envelope 114x162mm: "<</cupsInteger0 92/PageSize[323.28 459.36]/ImagingBBox null>>setpagedevice"
*PageSize EnvChou4/#4 Japanese Envelope 90x205mm: "<</cupsInteger0 111/PageSize[254.88 581.04]/ImagingBBox null>>setpagedevice"
*PageSize Env6/#6 Envelope 3.63x6.5in: "<</cupsInteger0 83/PageSize[261.36 468]/ImagingBBox null>>setpagedevice"
*PageSize EnvCard/Card Envelope 4.4x6in: "<</cupsInteger0 114/PageSize[315 432]/ImagingBBox null>>setpagedevice"
*PageSize EnvMonarch/Monarch Envelope 3.875x7.5in: "<</cupsInteger0 80/PageSize[279 540]/ImagingBBox null>>setpagedevice"
*PageSize EnvDL/DL Envelope 110x220mm: "<</cupsInteger0 90/PageSize[311.76 623.52]/ImagingBBox null>>setpagedevice"
*PageSize Env10/#10 Envelope 4.125x9.5in: "<</cupsInteger0 81/PageSize[297 684]/ImagingBBox null>>setpagedevice"
*PageSize EnvChou3/#3 Japanese Envelope 120x235mm: "<</cupsInteger0 110/PageSize[339.84 666]/ImagingBBox null>>setpagedevice"
*PageSize EnvC5/C5 Envelope 162x229mm: "<</cupsInteger0 91/PageSize[459.36 649.44]/ImagingBBox null>>setpagedevice"
*PageSize Statement/Statement 5.5x8.5in: "<</cupsInteger0 15/PageSize[396 612]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageSize
*OpenUI *PageRegion/Media Size: PickOne
*OrderDependency: 10 AnySetup *PageRegion
*DefaultPageRegion: A4
*PageRegion Card3x5/Index Card 3x5in: "<</cupsInteger0 78/PageSize[216 360]/ImagingBBox null>>setpagedevice"
*PageRegion PhotoL/Photo 3.5x5in: "<</cupsInteger0 121/PageSize[252 360]/ImagingBBox null>>setpagedevice"
*PageRegion PhotoL.FB/Photo Borderless 3.5x5in: "<</cupsInteger0 121/cupsReal0 .079/cupsReal1 .098/PageSize[264.744 374.112]/ImagingBBox null>>setpagedevice"
*PageRegion L/L 89x127mm: "<</cupsInteger0 121/PageSize[252 360]/ImagingBBox null>>setpagedevice"
*PageRegion L.FB/L Borderless 89x127mm: "<</cupsInteger0 121/cupsReal0 .079/cupsReal1 .098/PageSize[264.744 374.112]/ImagingBBox null>>setpagedevice"
*PageRegion Hagaki/Hagaki 100x148mm: "<</cupsInteger0 71/PageSize[283.68 419.76]/ImagingBBox null>>setpagedevice"
*PageRegion Hagaki.FB/Hagaki Borderless 100x148mm: "<</cupsInteger0 71/cupsReal0 .079/cupsReal1 .098/PageSize[296.424 433.872]/ImagingBBox null>>setpagedevice"
*PageRegion Card4x6/Index Card 4x6in: "<</cupsInteger0 74/PageSize[288 432]/ImagingBBox null>>setpagedevice"
*PageRegion Photo4x6/Photo 4x6in: "<</cupsInteger0 74/PageSize[288 432]/ImagingBBox null>>setpagedevice"
*PageRegion Photo4x6.FB/Photo Borderless 4x6in: "<</cupsInteger0 74/cupsReal0 .098/cupsReal1 .098/PageSize[303.552 446.112]/ImagingBBox null>>setpagedevice"
*PageRegion Photo4x6tab/Photo 4x6in (tab): "<</cupsInteger0 74/PageSize[288 432]/ImagingBBox null>>setpagedevice"
*PageRegion Photo4x6tab.FB/Photo Borderless 4x6in (tab): "<</cupsInteger0 74/cupsReal0 .098/cupsReal1 .098/PageSize[303.55 446.11]/ImagingBBox null>>setpagedevice"
*PageRegion A6/A6 105x148mm: "<</cupsInteger0 73/PageSize[297.36 419.76]/ImagingBBox null>>setpagedevice"
*PageRegion A6.FB/A6 Borderless 105x148mm: "<</cupsInteger0 73/cupsReal0 .079/cupsReal1 .098/PageSize[310.104 433.872]/ImagingBBox null>>setpagedevice"
*PageRegion Photo5x7/Photo 5x7in: "<</cupsInteger0 122/PageSize[360 504]/ImagingBBox null>>setpagedevice"
*PageRegion Photo5x7.FB/Photo Borderless 5x7in: "<</cupsInteger0 122/cupsReal0 .089/cupsReal1 .098/PageSize[372.816 518.112]/ImagingBBox null>>setpagedevice"
*PageRegion Photo2L/Photo 2L 127x178mm: "<</cupsInteger0 126/PageSize[360 504]/ImagingBBox null>>setpagedevice"
*PageRegion Photo2L.FB/Photo 2L Borderless 127x178mm: "<</cupsInteger0 126/cupsReal0 .089/cupsReal1 .098/PageSize[372.816 518.112]/ImagingBBox null>>setpagedevice"
*PageRegion Card5x8/Index Card 5x8in: "<</cupsInteger0 75/PageSize[360 576]/ImagingBBox null>>setpagedevice"
*PageRegion Ofuku/Ofuku-Hagaki 200x148mm: "<</cupsInteger0 72/PageSize[566.64 419.76]/ImagingBBox null>>setpagedevice"
*PageRegion A5/A5 148x210mm: "<</cupsInteger0 25/PageSize[419.76 595.44]/ImagingBBox null>>setpagedevice"
*PageRegion A5.FB/A5 Borderless 148x210mm: "<</cupsInteger0 25/cupsReal0 .098/cupsReal1 .098/PageSize[435.312 609.552]/ImagingBBox null>>setpagedevice"
*PageRegion B5/B5 176x250mm: "<</cupsInteger0 65/PageSize[498.96 708.48]/ImagingBBox null>>setpagedevice"
*PageRegion B5.Duplex/B5 AutoDuplex 176x250mm: "<</cupsInteger0 65/PageSize[498.96 699.48]/ImagingBBox null>>setpagedevice"
*PageRegion JB5/JB5 182x257mm: "<</cupsInteger0 45/PageSize [516.24 728.64]/ImagingBBox null>>setpagedevice"
*PageRegion JB5.Duplex/JB5 AutoDuplex 182x257mm: "<</cupsInteger0 45/PageSize [516.24 719.64]/ImagingBBox null>>setpagedevice"
*PageRegion Executive/Executive 7.25x10.5in: "<</cupsInteger0 1/PageSize[522 756]/ImagingBBox null>>setpagedevice"
*PageRegion Executive.Duplex/Executive AutoDuplex 7.25x10.5in: "<</cupsInteger0 1/PageSize[522 747]/ImagingBBox null>>setpagedevice"
*PageRegion 8x10/8x10in: "<</cupsInteger0 7/PageSize[576 720]/ImagingBBox null>>setpagedevice"
*PageRegion 8x10.FB/Borderless 8x10in: "<</cupsInteger0 7/cupsReal0 .098/cupsReal1 .098/PageSize[591.552 734.112]/ImagingBBox null>>setpagedevice"
*PageRegion Letter/Letter 8.5x11in: "<</cupsInteger0 2/PageSize[612 792]/ImagingBBox null>>setpagedevice"
*PageRegion Letter.FB/Letter Borderless 8.5x11in: "<</cupsInteger0 2/cupsReal0 .098/cupsReal1 .098/PageSize[627.552 806.112]/ImagingBBox null>>setpagedevice"
*PageRegion Letter.Duplex/Letter AutoDuplex 8.5x11in: "<</cupsInteger0 2/PageSize[612 783]/ImagingBBox null>>setpagedevice"
*PageRegion A4/A4 210x297mm: "<</cupsInteger0 26/PageSize[595.44 841.68]/ImagingBBox null>>setpagedevice"
*PageRegion A4.FB/A4 Borderless 210x297mm: "<</cupsInteger0 26/cupsReal0 .098/cupsReal1 .098/PageSize[610.992 855.792]/ImagingBBox null>>setpagedevice"
*PageRegion A4.Duplex/A4 AutoDuplex 210x297mm: "<</cupsInteger0 26/PageSize[595.44 832.68]/ImagingBBox null>>setpagedevice"
*PageRegion Legal/Legal 8.5x14in: "<</cupsInteger0 3/PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageRegion Photo10x15/Photo 10x15cm: "<</cupsInteger0 74/PageSize[288 432]/ImagingBBox null>>setpagedevice"
*PageRegion Photo10x15.FB/Borderless Photo 10x15cm: "<</cupsInteger0 74/cupsReal0 .098/cupsReal1 .098/PageSize[303.552 446.112]/ImagingBBox null>>setpagedevice"
*PageRegion Photo10x15tab/Photo 10x15cm (tab): "<</cupsInteger0 74/PageSize[288 432]/ImagingBBox null>>setpagedevice"
*PageRegion Photo10x15tab.FB/ Borderless Photo 10x15cm (tab): "<</cupsInteger0 74/cupsReal0 .098/cupsReal1 .098/PageSize[303.552 446.112]/ImagingBBox null>>setpagedevice"
*PageRegion Photo13x18/Photo 13x18cm: "<</cupsInteger0 122/PageSize[360 504]/ImagingBBox null>>setpagedevice"
*PageRegion Photo13x18.FB/Borderless Photo 13x18cm: "<</cupsInteger0 122/cupsReal0 .089/cupsReal1 .098/PageSize[372.816 518.112]/ImagingBBox null>>setpagedevice"
*PageRegion EnvA2/A2 Envelope 4.37x5.75in: "<</cupsInteger0 109/PageSize[314.64 414]/ImagingBBox null>>setpagedevice"
*PageRegion EnvC6/C6 Envelope 114x162mm: "<</cupsInteger0 92/PageSize[323.28 459.36]/ImagingBBox null>>setpagedevice"
*PageRegion EnvChou4/#4 Japanese Envelope 90x205mm: "<</cupsInteger0 111/PageSize[254.88 581.04]/ImagingBBox null>>setpagedevice"
*PageRegion Env6/#6 Envelope 3.63x6.5in: "<</cupsInteger0 83/PageSize[261.36 468]/ImagingBBox null>>setpagedevice"
*PageRegion EnvCard/Card Envelope 4.4x6in: "<</cupsInteger0 114/PageSize[315 432]/ImagingBBox null>>setpagedevice"
*PageRegion EnvMonarch/Monarch Envelope 3.875x7.5in: "<</cupsInteger0 80/PageSize[279 540]/ImagingBBox null>>setpagedevice"
*PageRegion EnvDL/DL Envelope 110x220mm: "<</cupsInteger0 90/PageSize[311.76 623.52]/ImagingBBox null>>setpagedevice"
*PageRegion Env10/#10 Envelope 4.125x9.5in: "<</cupsInteger0 81/PageSize[297 684]/ImagingBBox null>>setpagedevice"
*PageRegion EnvChou3/#3 Japanese Envelope 120x235mm: "<</cupsInteger0 110/PageSize[339.84 666]/ImagingBBox null>>setpagedevice"
*PageRegion EnvC5/C5 Envelope 162x229mm: "<</cupsInteger0 91/PageSize[459.36 649.44]/ImagingBBox null>>setpagedevice"
*PageRegion Statement/Statement 5.5x8.5in: "<</cupsInteger0 15/PageSize[396 612]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageRegion
*DefaultImageableArea: A4
*ImageableArea Card3x5/Index Card 3x5in: "9 9 207 351"
*ImageableArea PhotoL/Photo 3.5x5in: "9 9 243 351"
*ImageableArea PhotoL.FB/Photo Borderless 3.5x5in: "0 0 264.743988037109 374.111999511719"
*ImageableArea L/L 89x127mm: "9 9 243 351"
*ImageableArea L.FB/L Borderless 89x127mm: "0 0 264.743988037109 374.111999511719"
*ImageableArea Hagaki/Hagaki 100x148mm: "9 9 274.679992675781 410.760009765625"
*ImageableArea Hagaki.FB/Hagaki Borderless 100x148mm: "0 0 296.424011230469 433.872009277344"
*ImageableArea Card4x6/Index Card 4x6in: "9 9 279 423"
*ImageableArea Photo4x6/Photo 4x6in: "9 9 279 423"
*ImageableArea Photo4x6.FB/Photo Borderless 4x6in: "0 0 303.552001953125 446.111999511719"
*ImageableArea Photo4x6tab/Photo 4x6in (tab): "9 9 279 423"
*ImageableArea Photo4x6tab.FB/Photo Borderless 4x6in (tab): "0 0 303.549987792969 446.109985351562"
*ImageableArea A6/A6 105x148mm: "9 9 288.359985351562 410.760009765625"
*ImageableArea A6.FB/A6 Borderless 105x148mm: "0 0 310.10400390625 433.872009277344"
*ImageableArea Photo5x7/Photo 5x7in: "9 9 351 495"
*ImageableArea Photo5x7.FB/Photo Borderless 5x7in: "0 0 372.816009521484 518.111999511719"
*ImageableArea Photo2L/Photo 2L 127x178mm: "9 9 351 495"
*ImageableArea Photo2L.FB/Photo 2L Borderless 127x178mm: "0 0 372.816009521484 518.111999511719"
*ImageableArea Card5x8/Index Card 5x8in: "9 9 351 567"
*ImageableArea Ofuku/Ofuku-Hagaki 200x148mm: "9 9 557.640014648438 410.760009765625"
*ImageableArea A5/A5 148x210mm: "9 9 410.760009765625 586.440002441406"
*ImageableArea A5.FB/A5 Borderless 148x210mm: "0 0 435.31201171875 609.552001953125"
*ImageableArea B5/B5 176x250mm: "9 9 489.959991455078 699.47998046875"
*ImageableArea B5.Duplex/B5 AutoDuplex 176x250mm: "9 33.192001342773 489.959991455078 657.287963867188"
*ImageableArea JB5/JB5 182x257mm: "9 9 507.239990234375 719.640014648438"
*ImageableArea JB5.Duplex/JB5 AutoDuplex 182x257mm: "9 33.192001342773 507.239990234375 677.447998046875"
*ImageableArea Executive/Executive 7.25x10.5in: "9 9 513 747"
*ImageableArea Executive.Duplex/Executive AutoDuplex 7.25x10.5in: "9 33.192001342773 513 704.807983398438"
*ImageableArea 8x10/8x10in: "9 9 567 711"
*ImageableArea 8x10.FB/Borderless 8x10in: "0 0 591.552001953125 734.111999511719"
*ImageableArea Letter/Letter 8.5x11in: "9 9 603 783"
*ImageableArea Letter.FB/Letter Borderless 8.5x11in: "0 0 627.552001953125 806.111999511719"
*ImageableArea Letter.Duplex/Letter AutoDuplex 8.5x11in: "9 33.192001342773 603 740.807983398438"
*% *ImageableArea A4/A4 210x297mm: "9 9 586.440002441406 832.679992675781"
*% *ImageableArea A4/A4 210x297mm: "12.7mm 15.875mm 197.3mm 281.1mm"
*ImageableArea A4/A4 210x297mm: "36 45 559.27559 796.88976"
*ImageableArea A4.FB/A4 Borderless 210x297mm: "0 0 610.992004394531 855.7919921875"
*% *ImageableArea A4.Duplex/A4 AutoDuplex 210x297mm: "9 33.192001342773 586.440002441406 790.487976074219"
*% *ImageableArea A4.Duplex/A4 AutoDuplex 210x297mm: "12.7mm 15.9mm 197.3mm 281.1mm"
*ImageableArea A4.Duplex/A4 AutoDuplex 210x297mm: "36 45 559.27559 796.88976"
*ImageableArea Legal/Legal 8.5x14in: "9 9 603 999"
*ImageableArea Photo10x15/Photo 10x15cm: "9 9 279 423"
*ImageableArea Photo10x15.FB/Borderless Photo 10x15cm: "0 0 303.552001953125 446.111999511719"
*ImageableArea Photo10x15tab/Photo 10x15cm (tab): "9 9 279 423"
*ImageableArea Photo10x15tab.FB/ Borderless Photo 10x15cm (tab): "0 0 303.552001953125 446.111999511719"
*ImageableArea Photo13x18/Photo 13x18cm: "9 9 351 495"
*ImageableArea Photo13x18.FB/Borderless Photo 13x18cm: "0 0 372.816009521484 518.111999511719"
*ImageableArea EnvA2/A2 Envelope 4.37x5.75in: "9 42.192001342773 305.640014648438 405"
*ImageableArea EnvC6/C6 Envelope 114x162mm: "9 42.192001342773 314.279998779297 450.359985351562"
*ImageableArea EnvChou4/#4 Japanese Envelope 90x205mm: "9 42.192001342773 245.880004882812 572.039978027344"
*ImageableArea Env6/#6 Envelope 3.63x6.5in: "9 42.192001342773 252.359985351562 459"
*ImageableArea EnvCard/Card Envelope 4.4x6in: "9 42.192001342773 306 423"
*ImageableArea EnvMonarch/Monarch Envelope 3.875x7.5in: "9 42.192001342773 270 531"
*ImageableArea EnvDL/DL Envelope 110x220mm: "9 42.192001342773 302.760009765625 614.52001953125"
*ImageableArea Env10/#10 Envelope 4.125x9.5in: "9 42.192001342773 288 675"
*ImageableArea EnvChou3/#3 Japanese Envelope 120x235mm: "9 42.192001342773 330.839996337891 657"
*ImageableArea EnvC5/C5 Envelope 162x229mm: "9 42.192001342773 450.359985351562 640.440002441406"
*ImageableArea Statement/Statement 5.5x8.5in: "9 9 387 603"
*DefaultPaperDimension: A4
*PaperDimension Card3x5/Index Card 3x5in: "216 360"
*PaperDimension PhotoL/Photo 3.5x5in: "252 360"
*PaperDimension PhotoL.FB/Photo Borderless 3.5x5in: "264.743988037109 374.111999511719"
*PaperDimension L/L 89x127mm: "252 360"
*PaperDimension L.FB/L Borderless 89x127mm: "264.743988037109 374.111999511719"
*PaperDimension Hagaki/Hagaki 100x148mm: "283.679992675781 419.760009765625"
*PaperDimension Hagaki.FB/Hagaki Borderless 100x148mm: "296.424011230469 433.872009277344"
*PaperDimension Card4x6/Index Card 4x6in: "288 432"
*PaperDimension Photo4x6/Photo 4x6in: "288 432"
*PaperDimension Photo4x6.FB/Photo Borderless 4x6in: "303.552001953125 446.111999511719"
*PaperDimension Photo4x6tab/Photo 4x6in (tab): "288 432"
*PaperDimension Photo4x6tab.FB/Photo Borderless 4x6in (tab): "303.549987792969 446.109985351562"
*PaperDimension A6/A6 105x148mm: "297.359985351562 419.760009765625"
*PaperDimension A6.FB/A6 Borderless 105x148mm: "310.10400390625 433.872009277344"
*PaperDimension Photo5x7/Photo 5x7in: "360 504"
*PaperDimension Photo5x7.FB/Photo Borderless 5x7in: "372.816009521484 518.111999511719"
*PaperDimension Photo2L/Photo 2L 127x178mm: "360 504"
*PaperDimension Photo2L.FB/Photo 2L Borderless 127x178mm: "372.816009521484 518.111999511719"
*PaperDimension Card5x8/Index Card 5x8in: "360 576"
*PaperDimension Ofuku/Ofuku-Hagaki 200x148mm: "566.640014648438 419.760009765625"
*PaperDimension A5/A5 148x210mm: "419.760009765625 595.440002441406"
*PaperDimension A5.FB/A5 Borderless 148x210mm: "435.31201171875 609.552001953125"
*PaperDimension B5/B5 176x250mm: "498.959991455078 708.47998046875"
*PaperDimension B5.Duplex/B5 AutoDuplex 176x250mm: "498.959991455078 699.47998046875"
*PaperDimension JB5/JB5 182x257mm: "516.239990234375 728.640014648438"
*PaperDimension JB5.Duplex/JB5 AutoDuplex 182x257mm: "516.239990234375 719.640014648438"
*PaperDimension Executive/Executive 7.25x10.5in: "522 756"
*PaperDimension Executive.Duplex/Executive AutoDuplex 7.25x10.5in: "522 747"
*PaperDimension 8x10/8x10in: "576 720"
*PaperDimension 8x10.FB/Borderless 8x10in: "591.552001953125 734.111999511719"
*PaperDimension Letter/Letter 8.5x11in: "612 792"
*PaperDimension Letter.FB/Letter Borderless 8.5x11in: "627.552001953125 806.111999511719"
*PaperDimension Letter.Duplex/Letter AutoDuplex 8.5x11in: "612 783"
*PaperDimension A4/A4 210x297mm: "595.440002441406 841.679992675781"
*PaperDimension A4.FB/A4 Borderless 210x297mm: "610.992004394531 855.7919921875"
*PaperDimension A4.Duplex/A4 AutoDuplex 210x297mm: "595.440002441406 832.679992675781"
*PaperDimension Legal/Legal 8.5x14in: "612 1008"
*PaperDimension Photo10x15/Photo 10x15cm: "288 432"
*PaperDimension Photo10x15.FB/Borderless Photo 10x15cm: "303.552001953125 446.111999511719"
*PaperDimension Photo10x15tab/Photo 10x15cm (tab): "288 432"
*PaperDimension Photo10x15tab.FB/ Borderless Photo 10x15cm (tab): "303.552001953125 446.111999511719"
*PaperDimension Photo13x18/Photo 13x18cm: "360 504"
*PaperDimension Photo13x18.FB/Borderless Photo 13x18cm: "372.816009521484 518.111999511719"
*PaperDimension EnvA2/A2 Envelope 4.37x5.75in: "314.640014648438 414"
*PaperDimension EnvC6/C6 Envelope 114x162mm: "323.279998779297 459.359985351562"
*PaperDimension EnvChou4/#4 Japanese Envelope 90x205mm: "254.880004882812 581.039978027344"
*PaperDimension Env6/#6 Envelope 3.63x6.5in: "261.359985351562 468"
*PaperDimension EnvCard/Card Envelope 4.4x6in: "315 432"
*PaperDimension EnvMonarch/Monarch Envelope 3.875x7.5in: "279 540"
*PaperDimension EnvDL/DL Envelope 110x220mm: "311.760009765625 623.52001953125"
*PaperDimension Env10/#10 Envelope 4.125x9.5in: "297 684"
*PaperDimension EnvChou3/#3 Japanese Envelope 120x235mm: "339.839996337891 666"
*PaperDimension EnvC5/C5 Envelope 162x229mm: "459.359985351562 649.440002441406"
*PaperDimension Statement/Statement 5.5x8.5in: "396 612"
*MaxMediaWidth: "612"
*MaxMediaHeight: "2160"
*HWMargins: 9 9 9 9
*% *HWMargins: 12.7mm 15.9mm 12.7mm 15.9mm
*% *HWMargins: 36 45 36 45
*CustomPageSize True: "pop pop pop <</PageSize[5 -2 roll]/ImagingBBox null>>setpagedevice"
*ParamCustomPageSize Width: 1 points 216 612
*ParamCustomPageSize Height: 2 points 288 2160
*ParamCustomPageSize WidthOffset: 3 points 0 0
*ParamCustomPageSize HeightOffset: 4 points 0 0
*ParamCustomPageSize Orientation: 5 int 0 0
*OpenUI *Duplex/Double-Sided Printing: PickOne
*OrderDependency: 10 AnySetup *Duplex
*DefaultDuplex: None
*Duplex DuplexNoTumble/Long Edge (Standard): "<</Duplex true/Tumble false>>setpagedevice"
*Duplex DuplexTumble/Short Edge (Flip): "<</Duplex true/Tumble true>>setpagedevice"
*Duplex None/Off: "<</Duplex false/Tumble false>>setpagedevice"
*CloseUI: *Duplex
*OpenUI *ColorModel/Output Mode: PickOne
*OrderDependency: 10 AnySetup *ColorModel
*DefaultColorModel: KGray
*ColorModel CMYGray/High Quality Grayscale: "<</cupsColorSpace 1/cupsBitsPerColor 8/cupsRowStep 1>>setpagedevice"
*ColorModel KGray/Black Only Grayscale: "<</cupsColorSpace 1/cupsBitsPerColor 8/cupsRowStep 2>>setpagedevice"
*ColorModel RGB/Color: "<</cupsColorSpace 17/cupsBitsPerColor 8/cupsRowStep 0>>setpagedevice"
*CloseUI: *ColorModel
*OpenUI *MediaType/Media Type: PickOne
*OrderDependency: 10 AnySetup *MediaType
*DefaultMediaType: Automatic
*MediaType Automatic/Automatic: "<</MediaType(Automatic)/cupsMediaType -1>>setpagedevice"
*MediaType Plain/Plain Paper: "<</MediaType(Plain)/cupsMediaType 0>>setpagedevice"
*MediaType Glossy/Photo Paper: "<</MediaType(Glossy)/cupsMediaType 3>>setpagedevice"
*MediaType TransparencyFilm/Transparency Film: "<</MediaType(TransparencyFilm)/cupsMediaType 4>>setpagedevice"
*CloseUI: *MediaType
*OpenUI *OutputMode/Print Quality: PickOne
*OrderDependency: 10 AnySetup *OutputMode
*DefaultOutputMode: Normal
*OutputMode Auto/Automatic: "<</OutputType(-3)/HWResolution[600 600]>>setpagedevice"
*OutputMode FastDraft/Fast Draft: "<</OutputType(-2)/HWResolution[300 300]>>setpagedevice"
*OutputMode Normal/Normal: "<</OutputType(0)/HWResolution[600 600]>>setpagedevice"
*OutputMode Best/Best: "<</OutputType(1)/HWResolution[600 600]>>setpagedevice"
*OutputMode Photo/High-Resolution Photo: "<</OutputType(2)/HWResolution[1200 1200]>>setpagedevice"
*CloseUI: *OutputMode
*OpenUI *InputSlot/Media Source: PickOne
*OrderDependency: 10 AnySetup *InputSlot
*DefaultInputSlot: Auto
*InputSlot Auto/Auto-Select: "<</MediaPosition 7>>setpagedevice"
*InputSlot PhotoTray/Photo Tray: "<</MediaPosition 6>>setpagedevice"
*InputSlot Upper/Main Tray: "<</MediaPosition 1>>setpagedevice"
*CloseUI: *InputSlot
*OpenGroup: InstallableOptions/Installable Options
*OpenUI *OptionDuplex/Duplexer Installed: Boolean
*OrderDependency: 10 AnySetup *OptionDuplex
*DefaultOptionDuplex: True
*OptionDuplex False/Not Installed: ""
*OptionDuplex True/Installed: ""
*CloseUI: *OptionDuplex
*CloseGroup: InstallableOptions
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(1.05)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(1.05)" Standard ROM
*Font AvantGarde-Demi: Standard "(1.05)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(1.05)" Standard ROM
*Font Bookman-Demi: Standard "(1.05)" Standard ROM
*Font Bookman-DemiItalic: Standard "(1.05)" Standard ROM
*Font Bookman-Light: Standard "(1.05)" Standard ROM
*Font Bookman-LightItalic: Standard "(1.05)" Standard ROM
*Font Courier: Standard "(1.05)" Standard ROM
*Font Courier-Bold: Standard "(1.05)" Standard ROM
*Font Courier-BoldOblique: Standard "(1.05)" Standard ROM
*Font Courier-Oblique: Standard "(1.05)" Standard ROM
*Font Helvetica: Standard "(1.05)" Standard ROM
*Font Helvetica-Bold: Standard "(1.05)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(1.05)" Standard ROM
*Font Helvetica-Narrow: Standard "(1.05)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(1.05)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(1.05)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(1.05)" Standard ROM
*Font Helvetica-Oblique: Standard "(1.05)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(1.05)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(1.05)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(1.05)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(1.05)" Standard ROM
*Font Palatino-Bold: Standard "(1.05)" Standard ROM
*Font Palatino-BoldItalic: Standard "(1.05)" Standard ROM
*Font Palatino-Italic: Standard "(1.05)" Standard ROM
*Font Palatino-Roman: Standard "(1.05)" Standard ROM
*Font Symbol: Special "(001.005)" Special ROM
*Font Times-Bold: Standard "(1.05)" Standard ROM
*Font Times-BoldItalic: Standard "(1.05)" Standard ROM
*Font Times-Italic: Standard "(1.05)" Standard ROM
*Font Times-Roman: Standard "(1.05)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(1.05)" Standard ROM
*Font ZapfDingbats: Special "(001.005)" Special ROM
*% End of hp-photosmart_7520_series.ppd, 31846 bytes.

.

In `/etc/cups/cupsd.conf` I have set `LogLevel notice`, and both when I want to print a test page or when I want to print from LibreOffice, in the CUPS web interface the error

"cfFilterGhostscript: Error setting cupsMediaType ..."

is shown, and `/var/log/cups/error_log` shows:

E [23/Sep/2026:22:41:26 +0200] [Job 162] Job stopped due to filter errors; please consult the /var/log/cups/error_log file for details.
D [23/Sep/2026:22:41:26 +0200] [Job 162] The following messages were recorded from 22:41:26 to 22:41:26
D [23/Sep/2026:22:41:26 +0200] [Job 162] Applying default options...
D [23/Sep/2026:22:41:26 +0200] [Job 162] Adding default print-color-mode=monochrome
D [23/Sep/2026:22:41:26 +0200] [Job 162] Adding start banner page "none".
D [23/Sep/2026:22:41:26 +0200] [Job 162] Queued on "Photosmart_7520_IP-12" by "<CENSORED>".
D [23/Sep/2026:22:41:26 +0200] [Job 162] Auto-typing file...
D [23/Sep/2026:22:41:26 +0200] [Job 162] Request file type is application/pdf.
D [23/Sep/2026:22:41:26 +0200] [Job 162] File of type application/pdf queued by "<CENSORED>".
D [23/Sep/2026:22:41:26 +0200] [Job 162] Adding end banner page "none".
D [23/Sep/2026:22:41:26 +0200] [Job 162] time-at-processing=1790196086
D [23/Sep/2026:22:41:26 +0200] [Job 162] 3 filters for job:
D [23/Sep/2026:22:41:26 +0200] [Job 162] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [23/Sep/2026:22:41:26 +0200] [Job 162] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [23/Sep/2026:22:41:26 +0200] [Job 162] hpcups (application/vnd.cups-raster to printer/Photosmart_7520_IP-12, cost 0)
D [23/Sep/2026:22:41:26 +0200] [Job 162] job-sheets=none,none
D [23/Sep/2026:22:41:26 +0200] [Job 162] argv[0]="Photosmart_7520_IP-12"
D [23/Sep/2026:22:41:26 +0200] [Job 162] argv[1]="162"
D [23/Sep/2026:22:41:26 +0200] [Job 162] argv[2]="<CENSORED>"
D [23/Sep/2026:22:41:26 +0200] [Job 162] argv[3]="Untitled 1"
D [23/Sep/2026:22:41:26 +0200] [Job 162] argv[4]="1"
D [23/Sep/2026:22:41:26 +0200] [Job 162] argv[5]="Duplex=None InputSlot=Auto PageSize=A4 sides=one-sided job-uuid=urn:uuid:141e56e1-c966-3847-4548-041d5382d3ad print-color-mode=monochrome job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1790196086 time-at-processing=1790196086 document-name-supplied=CCmlXe"
D [23/Sep/2026:22:41:26 +0200] [Job 162] argv[6]="/var/spool/cups/d00162-001"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[3]="CUPS_REQUESTROOT=/var/spool/cups"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[4]="CUPS_SERVERBIN=/usr/lib/cups"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[5]="CUPS_SERVERROOT=/etc/cups"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[6]="CUPS_STATEDIR=/run/cups"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[7]="HOME=/var/spool/cups/tmp"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[9]="SERVER_ADMIN=root@<CENSORED>-winmax2"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[10]="SOFTWARE=CUPS/2.4.19"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[11]="TMPDIR=/var/spool/cups/tmp"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[12]="USER=root"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[13]="CUPS_MAX_MESSAGE=2047"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[14]="CUPS_SERVER=/run/cups/cups.sock"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[16]="IPP_PORT=631"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[17]="CHARSET=utf-8"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[18]="LANG=en_US.UTF-8"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[19]="PPD=/etc/cups/ppd/Photosmart_7520_IP-12.ppd"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[20]="CONTENT_TYPE=application/pdf"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[21]="DEVICE_URI=hp:/net/Photosmart_7520_series?hostname=hp7520-12"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[22]="PRINTER_INFO=HP PhotoSmart 7520 (IP .12)"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[23]="PRINTER_LOCATION=home"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[24]="PRINTER=Photosmart_7520_IP-12"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[25]="PRINTER_STATE_REASONS=none"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[26]="CUPS_FILETYPE=document"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [23/Sep/2026:22:41:26 +0200] [Job 162] envp[28]="AUTH_I****"
D [23/Sep/2026:22:41:26 +0200] [Job 162] Started filter /usr/lib/cups/filter/pdftopdf (PID 4078)
D [23/Sep/2026:22:41:26 +0200] [Job 162] Started filter /usr/lib/cups/filter/gstoraster (PID 4079)
D [23/Sep/2026:22:41:26 +0200] [Job 162] Started filter /usr/lib/cups/filter/hpcups (PID 4080)
D [23/Sep/2026:22:41:26 +0200] [Job 162] Started backend /usr/lib/cups/backend/hp (PID 4081)
D [23/Sep/2026:22:41:26 +0200] [Job 162] ppdFilterLoadPPD: Color profile qualifier determined from job and PPD data \'KGray.Automatic.\'
D [23/Sep/2026:22:41:26 +0200] [Job 162] ppdFilterLoadPPD: No ICC profiles specified in PPD
D [23/Sep/2026:22:41:26 +0200] [Job 162] ppdFilterLoadPPD: Searching for profile \"-/Automatic\"...
D [23/Sep/2026:22:41:26 +0200] [Job 162] ppdFilterLoadPPD: Color profile qualifier determined from job and PPD data \'KGray.Automatic.\'
D [23/Sep/2026:22:41:26 +0200] [Job 162] ppdFilterLoadPPD: No ICC profiles specified in PPD
D [23/Sep/2026:22:41:26 +0200] [Job 162] ppdFilterLoadPPD: Searching for profile \"-/Automatic\"...
D [23/Sep/2026:22:41:26 +0200] [Job 162] DEBUG: ppdFilterLoadPPD: Last filter determined by the PPD: hpcups; Final data MIME type: application/vnd.cups-raster => PDF filter wilppdFilterLoadPPD: Last filter determined by the PPD: hpcups; Final data MIME type: application/vnd.cups-raster => PDF filter will not log pages in page_log.l not log pages in page_log.
D [23/Sep/2026:22:41:26 +0200] [Job 162] cfFilterGhostscript: Output format: CUPS Raster
D [23/Sep/2026:22:41:26 +0200] [Job 162] cfFilterGhostscript: Copying input to temp file \"/var/spool/cups/tmp/00fef6abd5a69\"
D [23/Sep/2026:22:41:26 +0200] [Job 162] ppdFilterEmitJCL: Filter function (PID 4088) started.
D [23/Sep/2026:22:41:26 +0200] [Job 162] Set job-printer-state-message to "ppdFilterEmitJCL: Filter function (PID 4088) started.", current level=INFO
D [23/Sep/2026:22:41:26 +0200] [Job 162] ppdFilterEmitJCL: Filter function (PID 4088) exited with no errors.
D [23/Sep/2026:22:41:26 +0200] [Job 162] cfFilterGhostscript: Input format: PDF
D [23/Sep/2026:22:41:26 +0200] [Job 162] Color space requested: Default
D [23/Sep/2026:22:41:26 +0200] [Job 162] Final output format: CUPS Raster
D [23/Sep/2026:22:41:26 +0200] [Job 162] Format of the input document: application/pdf
D [23/Sep/2026:22:41:26 +0200] [Job 162] Document\'s input format provides absolute size dimensions for each page, using these if no output page size is provided.
D [23/Sep/2026:22:41:26 +0200] [Job 162] Print rendering intent = auto
D [23/Sep/2026:22:41:26 +0200] [Job 162] Color Manager: Calibration Mode/Off
D [23/Sep/2026:22:41:26 +0200] [Job 162] PID 4078 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [23/Sep/2026:22:41:26 +0200] [Job 162] Calling FindDeviceById(cups-Photosmart_7520_IP-12)
D [23/Sep/2026:22:41:26 +0200] [Job 162] Found device /org/freedesktop/ColorManager/devices/cups_Photosmart_7520_IP_12
D [23/Sep/2026:22:41:26 +0200] [Job 162] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [23/Sep/2026:22:41:26 +0200] [Job 162] Calling FindDeviceById(cups-Photosmart_7520_IP-12)
D [23/Sep/2026:22:41:26 +0200] [Job 162] Found device /org/freedesktop/ColorManager/devices/cups_Photosmart_7520_IP_12
D [23/Sep/2026:22:41:26 +0200] [Job 162] Calling GetProfileForQualifiers(KGray.Automatic....)
D [23/Sep/2026:22:41:26 +0200] [Job 162] Found profile /org/freedesktop/ColorManager/profiles/Photosmart_7520_IP_12_RGB__
D [23/Sep/2026:22:41:26 +0200] [Job 162] Calling org.freedesktop.ColorManager.Profile.Get(Filename)
D [23/Sep/2026:22:41:26 +0200] [Job 162] Failed to get profile filename for cups-Photosmart_7520_IP-12
D [23/Sep/2026:22:41:26 +0200] [Job 162] Color Manager: ICC Profile: 
D [23/Sep/2026:22:41:26 +0200] [Job 162] cfFilterGhostscript: Ghostscript using Any-Part-of-Pixel method to fill paths.
D [23/Sep/2026:22:41:26 +0200] [Job 162] cfFilterGhostscript: Ghostscript command line: gs -dQUIET -dSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dUsePDFX3Profile -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -sMediaType=Automatic -sOutputType=0 -r600x600 -dMediaPosition=7 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dcupsMediaType=4294967295 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=1 -dcupsRowStep=2 -dcupsInteger0=26 -scupsRenderingIntent=auto -scupsPageSizeName=A4 -dcupsManualCopies -I/usr/share/cups/fonts -c \'<</.HWMargins[36.000000 45.014172 36.170105 44.787415] /Margins[0 0]>>setpagedevice\' -f -_
D [23/Sep/2026:22:41:26 +0200] [Job 162] cfFilterGhostscript: Started Ghostscript (PID 4089)
D [23/Sep/2026:22:41:26 +0200] [Job 162] cfFilterGhostscript: Started logging (PID 4090)
D [23/Sep/2026:22:41:26 +0200] [Job 162] cfFilterGhostscript: Input data feed completed
D [23/Sep/2026:22:41:26 +0200] [Job 162] Set job-printer-state-message to "cfFilterGhostscript: Error setting cupsMediaType ...", current level=ERROR
D [23/Sep/2026:22:41:26 +0200] [Job 162] cfFilterGhostscript: Unrecoverable error: rangecheck in .putdeviceprops
D [23/Sep/2026:22:41:26 +0200] [Job 162] cfFilterGhostscript: Logging (PID 4090) exited with no errors.
D [23/Sep/2026:22:41:26 +0200] [Job 162] prnt/hpcups/HPCupsFilter.cpp 626: cupsRasterOpen failed, fd = 0
D [23/Sep/2026:22:41:26 +0200] [Job 162] prnt/backend/hp.c 919: ERROR: null print job total=0
D [23/Sep/2026:22:41:26 +0200] [Job 162] PID 4080 (/usr/lib/cups/filter/hpcups) stopped with status 1.
D [23/Sep/2026:22:41:26 +0200] [Job 162] Hint: Try setting the LogLevel to "debug" to find out more.
D [23/Sep/2026:22:41:26 +0200] [Job 162] PID 4081 (/usr/lib/cups/backend/hp) exited with no errors.
D [23/Sep/2026:22:41:26 +0200] [Job 162] PID 4079 (/usr/lib/cups/filter/gstoraster) stopped with status 1.
D [23/Sep/2026:22:41:26 +0200] [Job 162] Hint: Try setting the LogLevel to "debug" to find out more.
D [23/Sep/2026:22:41:26 +0200] [Job 162] End of messages
D [23/Sep/2026:22:41:26 +0200] [Job 162] printer-state=3(idle)
D [23/Sep/2026:22:41:26 +0200] [Job 162] printer-state-message="gstoraster filter failed."
D [23/Sep/2026:22:41:26 +0200] [Job 162] printer-state-reasons=none

.

When I set in `/etc/cups/cupsd.conf` I have set `LogLevel debug`, `/var/log/cups/error_log` shows:

D [23/Sep/2026:22:43:56 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [23/Sep/2026:22:43:56 +0200] [Client 3] Server address is "/run/cups/cups.sock".
D [23/Sep/2026:22:43:56 +0200] [Client 3] Accepted from localhost (Domain)
D [23/Sep/2026:22:43:56 +0200] [Client 3] Waiting for request.
D [23/Sep/2026:22:43:56 +0200] [Client 3] POST / HTTP/1.1
D [23/Sep/2026:22:43:56 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [23/Sep/2026:22:43:56 +0200] [Client 3] Read: status=200, state=6
D [23/Sep/2026:22:43:56 +0200] [Client 3] No authentication data provided.
D [23/Sep/2026:22:43:56 +0200] [Client 3] 2.0 CUPS-Get-Printers 21
D [23/Sep/2026:22:43:56 +0200] CUPS-Get-Printers
D [23/Sep/2026:22:43:56 +0200] [Client 3] Returning IPP successful-ok for CUPS-Get-Printers (no URI) from localhost.
D [23/Sep/2026:22:43:56 +0200] [Client 3] Content-Length: 30034
D [23/Sep/2026:22:43:56 +0200] [Client 3] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [23/Sep/2026:22:43:56 +0200] [Client 3] con->http=0x56543f0458c0
D [23/Sep/2026:22:43:56 +0200] [Client 3] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=30034, response=0x56543f0379f0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [23/Sep/2026:22:43:56 +0200] [Client 3] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [23/Sep/2026:22:43:56 +0200] [Client 3] bytes=0, http_state=0, data_remaining=30034
D [23/Sep/2026:22:43:56 +0200] [Client 3] Flushing write buffer.
D [23/Sep/2026:22:43:56 +0200] [Client 3] New state is HTTP_STATE_WAITING
D [23/Sep/2026:22:43:56 +0200] [Client 3] Waiting for request.
D [23/Sep/2026:22:43:56 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [23/Sep/2026:22:43:57 +0200] [Client 3] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [23/Sep/2026:22:43:57 +0200] [Client 3] Closing connection.
D [23/Sep/2026:22:43:57 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [23/Sep/2026:22:43:58 +0200] [Client 2] POST / HTTP/1.1
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [23/Sep/2026:22:43:58 +0200] [Client 2] Read: status=200, state=6
D [23/Sep/2026:22:43:58 +0200] [Client 2] No authentication data provided.
D [23/Sep/2026:22:43:58 +0200] [Client 2] 2.0 Get-Printer-Attributes 22
D [23/Sep/2026:22:43:58 +0200] Get-Printer-Attributes ipp://localhost:631/printers/Photosmart_7520_IP-12
D [23/Sep/2026:22:43:58 +0200] [Client 2] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost:631/printers/Photosmart_7520_IP-12) from localhost.
D [23/Sep/2026:22:43:58 +0200] [Client 2] Content-Length: 1343
D [23/Sep/2026:22:43:58 +0200] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [23/Sep/2026:22:43:58 +0200] [Client 2] con->http=0x56543f03a270
D [23/Sep/2026:22:43:58 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1343, response=0x56543eff3300(IPP_STATE_DATA), pipe_pid=0, file=-1
D [23/Sep/2026:22:43:58 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [23/Sep/2026:22:43:58 +0200] [Client 2] bytes=0, http_state=0, data_remaining=1343
D [23/Sep/2026:22:43:58 +0200] [Client 2] Flushing write buffer.
D [23/Sep/2026:22:43:58 +0200] [Client 2] New state is HTTP_STATE_WAITING
D [23/Sep/2026:22:43:58 +0200] [Client 2] Waiting for request.
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [23/Sep/2026:22:43:58 +0200] [Client 2] POST /printers/Photosmart_7520_IP-12 HTTP/1.1
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [23/Sep/2026:22:43:58 +0200] [Client 2] Read: status=200, state=6
D [23/Sep/2026:22:43:58 +0200] [Client 2] No authentication data provided.
D [23/Sep/2026:22:43:58 +0200] [Client 2] 2.0 Get-Printer-Attributes 23
D [23/Sep/2026:22:43:58 +0200] Get-Printer-Attributes ipp://localhost/printers/Photosmart_7520_IP-12
D [23/Sep/2026:22:43:58 +0200] [Client 2] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Photosmart_7520_IP-12) from localhost.
D [23/Sep/2026:22:43:58 +0200] [Client 2] Content-Length: 20712
D [23/Sep/2026:22:43:58 +0200] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [23/Sep/2026:22:43:58 +0200] [Client 2] con->http=0x56543f03a270
D [23/Sep/2026:22:43:58 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=20712, response=0x56543f004100(IPP_STATE_DATA), pipe_pid=0, file=-1
D [23/Sep/2026:22:43:58 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [23/Sep/2026:22:43:58 +0200] [Client 2] bytes=0, http_state=0, data_remaining=20712
D [23/Sep/2026:22:43:58 +0200] [Client 2] Flushing write buffer.
D [23/Sep/2026:22:43:58 +0200] [Client 2] New state is HTTP_STATE_WAITING
D [23/Sep/2026:22:43:58 +0200] [Client 2] Waiting for request.
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [23/Sep/2026:22:43:58 +0200] [Client 2] POST /printers/Photosmart_7520_IP-12 HTTP/1.1
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [23/Sep/2026:22:43:58 +0200] [Client 2] Read: status=200, state=6
D [23/Sep/2026:22:43:58 +0200] [Client 2] No authentication data provided.
D [23/Sep/2026:22:43:58 +0200] [Client 2] 2.0 Create-Job 24
D [23/Sep/2026:22:43:58 +0200] Create-Job ipp://localhost/printers/Photosmart_7520_IP-12
D [23/Sep/2026:22:43:58 +0200] cupsdMarkDirty(---J-)
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [23/Sep/2026:22:43:58 +0200] [Job 164] Applying default options...
D [23/Sep/2026:22:43:58 +0200] [Job 164] Adding default print-color-mode=monochrome
D [23/Sep/2026:22:43:58 +0200] add_job: requesting-user-name="<CENSORED>"
D [23/Sep/2026:22:43:58 +0200] Adding default job-sheets values "none,none"...
I [23/Sep/2026:22:43:58 +0200] [Job 164] Adding start banner page "none".
D [23/Sep/2026:22:43:58 +0200] Discarding unused job-created event...
I [23/Sep/2026:22:43:58 +0200] [Job 164] Queued on "Photosmart_7520_IP-12" by "<CENSORED>".
D [23/Sep/2026:22:43:58 +0200] [Client 2] Returning IPP successful-ok for Create-Job (no URI) from localhost.
D [23/Sep/2026:22:43:58 +0200] [Client 2] Content-Length: 201
D [23/Sep/2026:22:43:58 +0200] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [23/Sep/2026:22:43:58 +0200] [Client 2] con->http=0x56543f03a270
D [23/Sep/2026:22:43:58 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=201, response=0x56543effbd30(IPP_STATE_IDLE), pipe_pid=0, file=-1
D [23/Sep/2026:22:43:58 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [23/Sep/2026:22:43:58 +0200] [Client 2] bytes=0, http_state=0, data_remaining=201
D [23/Sep/2026:22:43:58 +0200] [Client 2] Flushing write buffer.
D [23/Sep/2026:22:43:58 +0200] [Client 2] New state is HTTP_STATE_WAITING
D [23/Sep/2026:22:43:58 +0200] [Client 2] Waiting for request.
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [23/Sep/2026:22:43:58 +0200] [Client 2] POST /printers/Photosmart_7520_IP-12 HTTP/1.1
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [23/Sep/2026:22:43:58 +0200] [Client 2] Read: status=200, state=6
D [23/Sep/2026:22:43:58 +0200] [Client 2] No authentication data provided.
D [23/Sep/2026:22:43:58 +0200] [Client 2] 2.0 Send-Document 25
D [23/Sep/2026:22:43:58 +0200] Send-Document ipp://localhost:631/printers/Photosmart_7520_IP-12
D [23/Sep/2026:22:43:58 +0200] cupsdIsAuthorized: requesting-user-name="<CENSORED>"
D [23/Sep/2026:22:43:58 +0200] [Job 164] Auto-typing file...
D [23/Sep/2026:22:43:58 +0200] [Job 164] Request file type is application/pdf.
D [23/Sep/2026:22:43:58 +0200] cupsdMarkDirty(---J-)
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [23/Sep/2026:22:43:58 +0200] [Job 164] File of type application/pdf queued by "<CENSORED>".
I [23/Sep/2026:22:43:58 +0200] [Job 164] Adding end banner page "none".
D [23/Sep/2026:22:43:58 +0200] cupsdMarkDirty(---J-)
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [23/Sep/2026:22:43:58 +0200] [Job 164] time-at-processing=1790196238
D [23/Sep/2026:22:43:58 +0200] cupsdMarkDirty(---J-)
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [23/Sep/2026:22:43:58 +0200] cupsdMarkDirty(---J-)
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [23/Sep/2026:22:43:58 +0200] Discarding unused printer-state-changed event...
D [23/Sep/2026:22:43:58 +0200] [Job 164] 3 filters for job:
D [23/Sep/2026:22:43:58 +0200] [Job 164] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [23/Sep/2026:22:43:58 +0200] [Job 164] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [23/Sep/2026:22:43:58 +0200] [Job 164] hpcups (application/vnd.cups-raster to printer/Photosmart_7520_IP-12, cost 0)
D [23/Sep/2026:22:43:58 +0200] [Job 164] job-sheets=none,none
D [23/Sep/2026:22:43:58 +0200] [Job 164] argv[0]="Photosmart_7520_IP-12"
D [23/Sep/2026:22:43:58 +0200] [Job 164] argv[1]="164"
D [23/Sep/2026:22:43:58 +0200] [Job 164] argv[2]="<CENSORED>"
D [23/Sep/2026:22:43:58 +0200] [Job 164] argv[3]="Untitled 1"
D [23/Sep/2026:22:43:58 +0200] [Job 164] argv[4]="1"
D [23/Sep/2026:22:43:58 +0200] [Job 164] argv[5]="Duplex=None InputSlot=Auto PageSize=A4 sides=one-sided job-uuid=urn:uuid:709eaf49-3dd3-3748-72ce-83e065e929dd print-color-mode=monochrome job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1790196238 time-at-processing=1790196238 document-name-supplied=5ZEPyB"
D [23/Sep/2026:22:43:58 +0200] [Job 164] argv[6]="/var/spool/cups/d00164-001"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[3]="CUPS_REQUESTROOT=/var/spool/cups"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[4]="CUPS_SERVERBIN=/usr/lib/cups"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[5]="CUPS_SERVERROOT=/etc/cups"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[6]="CUPS_STATEDIR=/run/cups"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[7]="HOME=/var/spool/cups/tmp"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[8]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[9]="SERVER_ADMIN=root@<CENSORED>-winmax2"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[10]="SOFTWARE=CUPS/2.4.19"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[11]="TMPDIR=/var/spool/cups/tmp"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[12]="USER=root"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[13]="CUPS_MAX_MESSAGE=2047"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[14]="CUPS_SERVER=/run/cups/cups.sock"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[16]="IPP_PORT=631"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[17]="CHARSET=utf-8"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[18]="LANG=en_US.UTF-8"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[19]="PPD=/etc/cups/ppd/Photosmart_7520_IP-12.ppd"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[20]="CONTENT_TYPE=application/pdf"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[21]="DEVICE_URI=hp:/net/Photosmart_7520_series?hostname=hp7520-12"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[22]="PRINTER_INFO=HP PhotoSmart 7520 (IP .12)"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[23]="PRINTER_LOCATION=home"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[24]="PRINTER=Photosmart_7520_IP-12"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[25]="PRINTER_STATE_REASONS=none"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[26]="CUPS_FILETYPE=document"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [23/Sep/2026:22:43:58 +0200] [Job 164] envp[28]="AUTH_I****"
I [23/Sep/2026:22:43:58 +0200] [Job 164] Started filter /usr/lib/cups/filter/pdftopdf (PID 30744)
I [23/Sep/2026:22:43:58 +0200] [Job 164] Started filter /usr/lib/cups/filter/gstoraster (PID 30745)
I [23/Sep/2026:22:43:58 +0200] [Job 164] Started filter /usr/lib/cups/filter/hpcups (PID 30746)
I [23/Sep/2026:22:43:58 +0200] [Job 164] Started backend /usr/lib/cups/backend/hp (PID 30747)
D [23/Sep/2026:22:43:58 +0200] Discarding unused job-state-changed event...
D [23/Sep/2026:22:43:58 +0200] [Client 2] Returning IPP successful-ok for Send-Document (ipp://localhost:631/printers/Photosmart_7520_IP-12) from localhost.
D [23/Sep/2026:22:43:58 +0200] [Client 2] Content-Length: 171
D [23/Sep/2026:22:43:58 +0200] [Client 2] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [23/Sep/2026:22:43:58 +0200] [Client 2] con->http=0x56543f03a270
D [23/Sep/2026:22:43:58 +0200] [Client 2] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=171, response=0x56543f037b40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [23/Sep/2026:22:43:58 +0200] [Client 2] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [23/Sep/2026:22:43:58 +0200] [Client 2] bytes=0, http_state=0, data_remaining=171
D [23/Sep/2026:22:43:58 +0200] [Client 2] Flushing write buffer.
D [23/Sep/2026:22:43:58 +0200] [Client 2] New state is HTTP_STATE_WAITING
D [23/Sep/2026:22:43:58 +0200] [Client 2] Waiting for request.
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients and dirty files"
D [23/Sep/2026:22:43:58 +0200] [Job 164] ppdFilterLoadPPD: Color profile qualifier determined from job and PPD data \'KGray.Automatic.\'
D [23/Sep/2026:22:43:58 +0200] [Job 164] ppdFilterLoadPPD: No ICC profiles specified in PPD
D [23/Sep/2026:22:43:58 +0200] [Job 164] ppdFilterLoadPPD: Searching for profile \"-/Automatic\"...
D [23/Sep/2026:22:43:58 +0200] [Job 164] ppdFilterLoadPPD: Color profile qualifier determined from job and PPD data \'KGray.Automatic.\'
D [23/Sep/2026:22:43:58 +0200] [Job 164] ppdFilterLoadPPD: No ICC profiles specified in PPD
D [23/Sep/2026:22:43:58 +0200] [Job 164] ppdFilterLoadPPD: Searching for profile \"-/Automatic\"...
D [23/Sep/2026:22:43:58 +0200] [Job 164] ppdFilterLoadPPD: Last filter determined by the PPD: hpcups; Final data MIME type: application/vnd.cups-raster => PDF filter will not log pages in page_log.
D [23/Sep/2026:22:43:58 +0200] [Job 164] ppdFilterLoadPPD: Last filter determined by the PPD: hpcups; Final data MIME type: application/vnd.cups-raster => PDF filter will not log pages in page_log.
D [23/Sep/2026:22:43:58 +0200] [Job 164] cfFilterGhostscript: Output format: CUPS Raster
D [23/Sep/2026:22:43:58 +0200] [Job 164] cfFilterGhostscript: Copying input to temp file \"/var/spool/cups/tmp/078196abf5818\"
D [23/Sep/2026:22:43:58 +0200] [Job 164] ppdFilterEmitJCL: Filter function (PID 30748) started.
D [23/Sep/2026:22:43:58 +0200] cupsdMarkDirty(---J-)
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [23/Sep/2026:22:43:58 +0200] cupsdMarkDirty(---J-)
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [23/Sep/2026:22:43:58 +0200] [Job 164] Set job-printer-state-message to "ppdFilterEmitJCL: Filter function (PID 30748) started.", current level=INFO
D [23/Sep/2026:22:43:58 +0200] Discarding unused job-progress event...
D [23/Sep/2026:22:43:58 +0200] Discarding unused printer-state-changed event...
D [23/Sep/2026:22:43:58 +0200] [Job 164] ppdFilterEmitJCL: Filter function (PID 30748) exited with no errors.
D [23/Sep/2026:22:43:58 +0200] [Job 164] cfFilterGhostscript: Input format: PDF
D [23/Sep/2026:22:43:58 +0200] [Job 164] Color space requested: Default
D [23/Sep/2026:22:43:58 +0200] [Job 164] Final output format: CUPS Raster
D [23/Sep/2026:22:43:58 +0200] [Job 164] Format of the input document: application/pdf
D [23/Sep/2026:22:43:58 +0200] [Job 164] Document\'s input format provides absolute size dimensions for each page, using these if no output page size is provided.
D [23/Sep/2026:22:43:58 +0200] [Job 164] Print rendering intent = auto
D [23/Sep/2026:22:43:58 +0200] [Job 164] Color Manager: Calibration Mode/Off
D [23/Sep/2026:22:43:58 +0200] [Job 164] PID 30744 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [23/Sep/2026:22:43:58 +0200] [Job 164] Calling FindDeviceById(cups-Photosmart_7520_IP-12)
D [23/Sep/2026:22:43:58 +0200] [Job 164] Found device /org/freedesktop/ColorManager/devices/cups_Photosmart_7520_IP_12
D [23/Sep/2026:22:43:58 +0200] [Job 164] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [23/Sep/2026:22:43:58 +0200] [Job 164] Calling FindDeviceById(cups-Photosmart_7520_IP-12)
D [23/Sep/2026:22:43:58 +0200] [Job 164] Found device /org/freedesktop/ColorManager/devices/cups_Photosmart_7520_IP_12
D [23/Sep/2026:22:43:58 +0200] [Job 164] Calling GetProfileForQualifiers(KGray.Automatic....)
D [23/Sep/2026:22:43:58 +0200] [Job 164] Found profile /org/freedesktop/ColorManager/profiles/Photosmart_7520_IP_12_RGB__
D [23/Sep/2026:22:43:58 +0200] [Job 164] Calling org.freedesktop.ColorManager.Profile.Get(Filename)
D [23/Sep/2026:22:43:58 +0200] [Job 164] Failed to get profile filename for cups-Photosmart_7520_IP-12
D [23/Sep/2026:22:43:58 +0200] [Job 164] Color Manager: ICC Profile: 
D [23/Sep/2026:22:43:58 +0200] [Job 164] cfFilterGhostscript: Ghostscript using Any-Part-of-Pixel method to fill paths.
D [23/Sep/2026:22:43:58 +0200] [Job 164] cfFilterGhostscript: Ghostscript command line: gs -dQUIET -dSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dUsePDFX3Profile -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -sMediaType=Automatic -sOutputType=0 -r600x600 -dMediaPosition=7 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dcupsMediaType=4294967295 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=1 -dcupsRowStep=2 -dcupsInteger0=26 -scupsRenderingIntent=auto -scupsPageSizeName=A4 -dcupsManualCopies -I/usr/share/cups/fonts -c \'<</.HWMargins[36.000000 45.014172 36.170105 44.787415] /Margins[0 0]>>setpagedevice\' -f -_
D [23/Sep/2026:22:43:58 +0200] [Job 164] cfFilterGhostscript: Started Ghostscript (PID 30754)
D [23/Sep/2026:22:43:58 +0200] [Job 164] cfFilterGhostscript: Started logging (PID 30755)
D [23/Sep/2026:22:43:58 +0200] [Job 164] cfFilterGhostscript: Input data feed completed
E [23/Sep/2026:22:43:58 +0200] [Job 164] cfFilterGhostscript: Error setting cupsMediaType ...
D [23/Sep/2026:22:43:58 +0200] cupsdMarkDirty(---J-)
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [23/Sep/2026:22:43:58 +0200] [Job 164] Set job-printer-state-message to "cfFilterGhostscript: Error setting cupsMediaType ...", current level=ERROR
D [23/Sep/2026:22:43:58 +0200] [Job 164] cfFilterGhostscript: Unrecoverable error: rangecheck in .putdeviceprops
D [23/Sep/2026:22:43:58 +0200] Discarding unused job-progress event...
D [23/Sep/2026:22:43:58 +0200] Discarding unused printer-state-changed event...
E [23/Sep/2026:22:43:58 +0200] [Job 164] cfFilterGhostscript: Ghostscript (PID 30754) stopped with status 255
D [23/Sep/2026:22:43:58 +0200] Discarding unused job-progress event...
D [23/Sep/2026:22:43:58 +0200] Discarding unused printer-state-changed event...
D [23/Sep/2026:22:43:58 +0200] [Job 164] cfFilterGhostscript: Logging (PID 30755) exited with no errors.
D [23/Sep/2026:22:43:58 +0200] [Job 164] prnt/hpcups/HPCupsFilter.cpp 626: cupsRasterOpen failed, fd = 0
E [23/Sep/2026:22:43:58 +0200] [Job 164] gstoraster filter failed.
D [23/Sep/2026:22:43:58 +0200] Discarding unused job-progress event...
D [23/Sep/2026:22:43:58 +0200] Discarding unused printer-state-changed event...
D [23/Sep/2026:22:43:58 +0200] [Job 164] prnt/backend/hp.c 919: ERROR: null print job total=0
D [23/Sep/2026:22:43:58 +0200] [Job 164] PID 30746 (/usr/lib/cups/filter/hpcups) stopped with status 1.
D [23/Sep/2026:22:43:58 +0200] [Job 164] PID 30747 (/usr/lib/cups/backend/hp) exited with no errors.
D [23/Sep/2026:22:43:58 +0200] [Job 164] PID 30745 (/usr/lib/cups/filter/gstoraster) stopped with status 1.
D [23/Sep/2026:22:43:58 +0200] Discarding unused job-state-changed event...
E [23/Sep/2026:22:43:58 +0200] [Job 164] Job stopped due to filter errors; please consult the /var/log/cups/error_log file for details.
D [23/Sep/2026:22:43:58 +0200] cupsdMarkDirty(---J-)
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [23/Sep/2026:22:43:58 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
D [23/Sep/2026:22:43:58 +0200] Discarding unused printer-state-changed event...
D [23/Sep/2026:22:43:59 +0200] [Job 164] Unloading...

.

I always see

cfFilterGhostscript: Error setting cupsMediaType ...

as error message without details which seem useful to me.

---

Interestingly, printing on my Pentax PocketJet II thermo printer, attached via a USB parallel port, with very old pentaxpj-cups driver works.

Regards!

Last edited by dreieck (2026-09-23 21:37:32)

seth · 2026-09-24 07:14:06

hplip doesn't show up there?
Tried to re-add the printer?

Do you have https://aur.archlinux.org/packages/hplip-plugin ?
(Though it's not listed at https://developers.hp.com/hp-linux-imag … lugin.html )

Not sure whether that's accurate but according to google™ the printer supports airprint which is https://wiki.archlinux.org/title/CUPS#A … Everywhere
You can use nmap to check whether it has port 631 open (the one in the log is your localhost cups)

dreieck · 2026-09-24 14:07:59

seth wrote:

hplip doesn't show up there?

It is the `hpcups` filter that is from `hplip`.

seth wrote:

Tried to re-add the printer?

not yet .. actually, software updates breaking stuff so that I have to delete and re-add all the printers is not really acceptable.

And, last week I freshly tried to add a Brother printer, also did not work (but different error since it was before last system update, but same-different error I got with my HP printer before last system update). Now I don't have access to that Brother printer anymore.

seth wrote:

Do you have https://aur.archlinux.org/packages/hplip-plugin ?

Yes. Also, re-built it.

seth wrote:

Not sure whether that's accurate but according to google™ the printer supports airprint which is https://wiki.archlinux.org/title/CUPS#A … Everywhere
You can use nmap to check whether it has port 631 open (the one in the log is your localhost cups)

`nc <printer-IP> 631` (netcat) actually gives a connection.

But: According to this guide, The printer must be advertised with Bonjour broadcasting.
`avahi-browse -rt _ipp._tcp` does not give any result -- understandable, since the printer is in a different subnet than my computer which disallows it from reaching the internet, but routing between the network where my computer is in and the printer's network is possible. Broadcasts seem not to be propagated between the different networks.

And then I still need to select a make/model/driver, which in the end will include the `hpcups` filter which is the one which is failing ... when I have to select a manufacturer and model, the CUPS web interface has fpr the Photosmart 7520 only the `hpcups` driver, not gutenprint, foomatic, or anything else, available.

And this still does not solve the same physical printer connected via USB, though, which also errors out with

cfFilterGhostscript: Error setting cupsMediaType ...

and uses the same driver, and as connection:

usb://HP/Photosmart%207520%20series?serial=TH3C97111605YY&interface=1

.

seth · 2026-09-24 14:48:04

You don't needs mdns to use the printer, only to "find" it, https://wiki.archlinux.org/title/CUPS#A … Everywhere and the whole point of IPPe is to *not* use any custom drivers, but you'll need https://archlinux.org/packages/extra/x86_64/cups-pdf/
https://archlinux.org/packages/extra/x86_64/ipp-usb/ allows to use that via USB.

Since CUPS plans to completely drop driver support in favor of IPPe (don't ask me when or what exactly that will look like) you might as well look into that.
(Tbh, the recent cups breakage is such a massive clusterfuck that I'd not be surprised if it's nothing but a test balloon for IPPe…)

dreieck · 2026-09-24 15:38:59

seth wrote:

You don't needs mdns to use the printer, only to "find" it, https://wiki.archlinux.org/title/CUPS#A … Everywhere and the whole point of IPPe is to *not* use any custom drivers, but you'll need https://archlinux.org/packages/extra/x86_64/cups-pdf/

How can I set with this printer specific options, i.e. resultions as supported by the printer, duplex only if the printer supports it, hardware specific margins, etc.?, if I do not use any model specific driver?

Last edited by dreieck (2026-09-24 15:39:21)

dreieck · 2026-09-24 15:47:37

P.S.: In the cups debug log, I now see more details about a ghostscript call that is failing:

[...]D [24/Sep/2026:17:40:18 +0200] [Job 174] Found profile /org/freedesktop/ColorManager/profiles/Photosmart_7520_IP_12_RGB__
D [24/Sep/2026:17:40:18 +0200] [Job 174] Calling org.freedesktop.ColorManager.Profile.Get(Filename)
D [24/Sep/2026:17:40:18 +0200] [Job 174] Failed to get profile filename for cups-Photosmart_7520_IP-12
D [24/Sep/2026:17:40:18 +0200] [Job 174] Color Manager: ICC Profile: 
D [24/Sep/2026:17:40:18 +0200] [Job 174] cfFilterGhostscript: Ghostscript using Any-Part-of-Pixel method to fill paths.
D [24/Sep/2026:17:40:18 +0200] [Job 174] cfFilterGhostscript: Ghostscript command line: gs -dQUIET -dSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dUsePDFX3Profile -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -sMediaType=Automatic -sOutputType=0 -r600x600 -dMediaPosition=7 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dcupsMediaType=4294967295 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=1 -dcupsRowStep=2 -dcupsInteger0=26 -scupsRenderingIntent=auto -scupsPageSizeName=A4 -dcupsManualCopies -I/usr/share/cups/fonts -c \'<</.HWMargins[36.000000 45.014172 36.170105 44.787415] /Margins[0 0]>>setpagedevice\' -f -_
D [24/Sep/2026:17:40:18 +0200] [Job 174] cfFilterGhostscript: Started Ghostscript (PID 4422)
D [24/Sep/2026:17:40:18 +0200] [Job 174] cfFilterGhostscript: Started logging (PID 4423)
D [24/Sep/2026:17:40:18 +0200] [Job 174] cfFilterGhostscript: Input data feed completed
E [24/Sep/2026:17:40:18 +0200] [Job 174] cfFilterGhostscript: Error setting cupsMediaType ...
D [24/Sep/2026:17:40:18 +0200] [Job 174] cfFilterGhostscript: Unrecoverable error: rangecheck in .putdeviceprops
[...]

Specifically, it wants to call

gs -dQUIET -dSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dUsePDFX3Profile -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -sMediaType=Automatic -sOutputType=0 -r600x600 -dMediaPosition=7 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dcupsMediaType=4294967295 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=1 -dcupsRowStep=2 -dcupsInteger0=26 -scupsRenderingIntent=auto -scupsPageSizeName=A4 -dcupsManualCopies -I/usr/share/cups/fonts -c \'<</.HWMargins[36.000000 45.014172 36.170105 44.787415] /Margins[0 0]>>setpagedevice\' -f -_

and that seems to fail with

Unrecoverable error: rangecheck in .putdeviceprops

.

dreieck · 2026-09-24 16:22:34

… trying to add it via the CUPS webinterface as IPP Everywhere printer following this guide fails with

Unable to create PPD: No IPP attributes.

Command line

lpadmin -p <printername> -E -v "ipp://<hostname>/ipp/print" -m everywhere

worked.

Last edited by dreieck (2026-09-24 16:22:51)

seth · 2026-09-24 17:58:43

Unable to create PPD sounds like you didn't elect the IPPe "driver"?
Your solution is however the same as the previously linked https://wiki.archlinux.org/title/CUPS#A … Everywhere

Do you have the printer at a usable state this way (including margin, duplex and everything else you'd want to configure)?

dreieck · 2026-09-24 21:00:05

seth wrote:

Unable to create PPD sounds like you didn't elect the IPPe "driver"?

I did.

However, the different tutorials mention different IPP URIs: ""ipp://<hostname>/ipp/port1" (the tutorial which I linked which describes how to do it via the CUPS webinterface) and "ipp://<hostname>/ipp/print" (the command line tutorial you linked).

seth wrote:

Do you have the printer at a usable state this way (including margin, duplex and everything else you'd want to configure)?

Printer is there and can print, and I am confused if the settings actually are legit or not.
Is "IPP Everywhere" querying from the printer it's setting and populating the CUPS webinterface settings by the results?

Also confused: As far as I understand "driverless" also should mean "no PPD files". But there is a PPD file created in `/etc/cups/ppd` for every "driverless" printer I add.

Hm.

And: When CUPS eventually forces "driverless", how can I still use my not-IPP-Everywhere-capable printer(s) (like the Pentax PocketJet II)?

Very confusing currently for me.

Regards!

seth · 2026-09-25 16:08:24

The path in the URI is printer specific and not really standardized (though typically consistent within the same vendor)

https://www.pwg.org/ipp/ippguide.html#q … attributes
Effectively the printer runs its own cups instance and the local one is a hub for that.
At least as long as printer drivers are supported there's gonna be requirement to discriminate the various drivers (arguably IPPe still is a "driver" and so is cups-pdf…)

Very confusing currently for me.

seth wrote:

don't ask me when or what exactly that will look like

V1del · 2026-09-26 11:04:31

Dreieck wrote:

And: When CUPS eventually forces "driverless", how can I still use my not-IPP-Everywhere-capable printer(s) (like the Pentax PocketJet II)?

The vision is that (... at least for the openly available drivers) you'll have a "printer application" that provides the driver settings and then cups talks IPP to "that" which in turn talks to the printer: https://openprinting.github.io/cups/drivers.html -- what's also quite weird is that the "official" distribution channel of those is intended to be snap but afaik we are still somewhat off of a official cups 3 release and is likely TBD how Arch's packaging will react to this.

Last edited by V1del (2026-09-26 11:08:41)

Arch Linux

#1 2026-09-02 18:38:47

[SOLVED] Printing test page fails

#2 2026-09-02 20:53:20

Re: [SOLVED] Printing test page fails

#3 2026-09-03 14:22:00

Re: [SOLVED] Printing test page fails

#4 2026-09-03 14:44:32

Re: [SOLVED] Printing test page fails

#5 2026-09-03 20:56:39

Re: [SOLVED] Printing test page fails

#6 2026-09-03 21:25:54

Re: [SOLVED] Printing test page fails

#7 2026-09-04 07:13:33

Re: [SOLVED] Printing test page fails

#8 2026-09-04 21:07:00

Re: [SOLVED] Printing test page fails

#9 2026-09-05 03:33:17

Re: [SOLVED] Printing test page fails

#10 2026-09-07 11:07:12

Re: [SOLVED] Printing test page fails

#11 2026-09-21 08:06:23

Re: [SOLVED] Printing test page fails

#12 2026-09-21 08:09:48

Re: [SOLVED] Printing test page fails

#13 2026-09-21 13:19:38

Re: [SOLVED] Printing test page fails

#14 2026-09-22 19:12:14

Re: [SOLVED] Printing test page fails

#15 2026-09-23 20:45:47

Re: [SOLVED] Printing test page fails

#16 2026-09-24 07:14:06

Re: [SOLVED] Printing test page fails

#17 2026-09-24 14:07:59

Re: [SOLVED] Printing test page fails

#18 2026-09-24 14:48:04

Re: [SOLVED] Printing test page fails

#19 2026-09-24 15:38:59

Re: [SOLVED] Printing test page fails

#20 2026-09-24 15:47:37

Re: [SOLVED] Printing test page fails

#21 2026-09-24 16:22:34

Re: [SOLVED] Printing test page fails

#22 2026-09-24 17:58:43

Re: [SOLVED] Printing test page fails

#23 2026-09-24 21:00:05

Re: [SOLVED] Printing test page fails

#24 2026-09-25 16:08:24

Re: [SOLVED] Printing test page fails

#25 2026-09-26 11:04:31

Re: [SOLVED] Printing test page fails

Board footer