Arch Linux

JohnnySSH

Member

Registered: 2013-05-04

Posts: 105

Constant USB device disconnects

Hi everyone,

I have some cameras and other specialist gear connected to my laptop and sadly I keep getting USB disconnect issues....

This was the original dmesg output:

[    0.008968] ACPI: SSDT 0x0000000073811000 000E54 (v02 LENOVO UsbCTabl 00001000 INTL 20200717)
[    1.174676] ACPI: bus type USB registered
[    1.174676] usbcore: registered new interface driver usbfs
[    1.174676] usbcore: registered new interface driver hub
[    1.174676] usbcore: registered new device driver usb
[    1.418672] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.420108] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.420110] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.420144] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[    1.420146] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.420147] usb usb1: Product: xHCI Host Controller
[    1.420148] usb usb1: Manufacturer: Linux 6.18.47-1-lts xhci-hcd
[    1.420149] usb usb1: SerialNumber: 0000:00:14.0
[    1.420346] hub 1-0:1.0: USB hub found
[    1.422098] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[    1.422100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.422101] usb usb2: Product: xHCI Host Controller
[    1.422102] usb usb2: Manufacturer: Linux 6.18.47-1-lts xhci-hcd
[    1.422103] usb usb2: SerialNumber: 0000:00:14.0
[    1.422299] hub 2-0:1.0: USB hub found
[    1.422946] xhci_hcd 0000:56:00.0: new USB bus registered, assigned bus number 3
[    1.424415] xhci_hcd 0000:56:00.0: new USB bus registered, assigned bus number 4
[    1.424416] xhci_hcd 0000:56:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.424442] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[    1.424443] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.424445] usb usb3: Product: xHCI Host Controller
[    1.424446] usb usb3: Manufacturer: Linux 6.18.47-1-lts xhci-hcd
[    1.424447] usb usb3: SerialNumber: 0000:56:00.0
[    1.424621] hub 3-0:1.0: USB hub found
[    1.425295] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[    1.425297] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.425298] usb usb4: Product: xHCI Host Controller
[    1.425299] usb usb4: Manufacturer: Linux 6.18.47-1-lts xhci-hcd
[    1.425300] usb usb4: SerialNumber: 0000:56:00.0
[    1.425516] hub 4-0:1.0: USB hub found
[    1.426609] usbcore: registered new interface driver usbserial_generic
[    1.426613] usbserial: USB Serial support registered for generic
[    1.435723] usbcore: registered new interface driver usbhid
[    1.435724] usbhid: USB HID core driver
[    1.664371] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.797189] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.60
[    1.797211] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.797218] usb 1-1: Product: USB2.0 Hub
[    1.800614] hub 1-1:1.0: USB hub found
[    1.874436] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.889458] usb 4-1: New USB device found, idVendor=a0a0, idProduct=5335, bcdDevice= 0.00
[    1.889478] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.889484] usb 4-1: Product: Ares-M PRO
[    1.889489] usb 4-1: Manufacturer: Player One
[    1.911003] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.926155] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[    1.926167] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.926171] usb 2-1: Product: Ceres 462M
[    1.926174] usb 2-1: Manufacturer: Player One
[    2.041031] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    2.182234] usb 1-6: New USB device found, idVendor=06cb, idProduct=00f9, bcdDevice= 0.00
[    2.182242] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.182245] usb 1-6: SerialNumber: 7f46daf27100
[    2.254367] usb 1-1.2: new full-speed USB device number 4 using xhci_hcd
[    2.338031] usb 1-1.2: New USB device found, idVendor=a0a0, idProduct=f001, bcdDevice= 2.00
[    2.338049] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.338056] usb 1-1.2: Product: Player One Filter Switch
[    2.338061] usb 1-1.2: Manufacturer: Player One
[    2.338065] usb 1-1.2: SerialNumber: 6D8D38935271
[    2.345752] hid-generic 0003:A0A0:F001.0001: hiddev96,hidraw0: USB HID v1.11 Device [Player One Player One Filter Switch] on usb-0000:00:14.0-1.2/input0
[    2.451088] usb 1-7: new full-speed USB device number 5 using xhci_hcd
[    2.584880] usb 1-7: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00
[    2.584904] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.584911] usb 1-7: Product: CP2102N USB to UART Bridge Controller
[    2.584917] usb 1-7: Manufacturer: Silicon Labs
[    2.584922] usb 1-7: SerialNumber: 8a1c368ab02eef11b1e3bb09ec7b7d6d
[    2.704313] usb 1-8: new high-speed USB device number 6 using xhci_hcd
[    2.842464] usb 1-8: New USB device found, idVendor=174f, idProduct=1812, bcdDevice=10.20
[    2.842487] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.842495] usb 1-8: Product: Integrated Camera
[    2.842501] usb 1-8: Manufacturer:  
[    2.842506] usb 1-8: SerialNumber: 0001
[    2.964283] usb 1-10: new full-speed USB device number 7 using xhci_hcd
[    3.100660] usb 1-10: New USB device found, idVendor=8087, idProduct=0033, bcdDevice= 0.00
[    3.100676] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.698952] usbcore: registered new interface driver cp210x
[    5.702608] usbserial: USB Serial support registered for cp210x
[    5.706530] usb 1-7: cp210x converter now attached to ttyUSB0
[    5.861856] usbcore: registered new interface driver btusb
[    5.874259] usbcore: registered new interface driver uvcvideo
[    5.994017] typec port0: bound usb1-port1 (ops connector_ops)
[    5.994025] typec port0: bound usb4-port1 (ops connector_ops)
[    6.311552] typec port1: bound usb1-port2 (ops connector_ops)
[    6.311560] typec port1: bound usb4-port2 (ops connector_ops)
[ 3027.284979] usb 2-1: usbfs: usb_submit_urb returned -19
[ 3027.559276] usb 2-1: USB disconnect, device number 2
[ 3027.796227] usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd
[ 3027.811039] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[ 3027.811068] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3027.811079] usb 2-1: Product: Ceres 462M
[ 3027.811088] usb 2-1: Manufacturer: Player One
[ 3929.583916] usb 1-1.2: USB disconnect, device number 4
[ 3942.423140] usb 1-1.2: new full-speed USB device number 8 using xhci_hcd
[ 3942.505738] usb 1-1.2: New USB device found, idVendor=a0a0, idProduct=f001, bcdDevice= 2.00
[ 3942.505742] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3942.505743] usb 1-1.2: Product: Player One Filter Switch
[ 3942.505744] usb 1-1.2: Manufacturer: Player One
[ 3942.505745] usb 1-1.2: SerialNumber: 6D8D38935271
[ 3942.512119] hid-generic 0003:A0A0:F001.0003: hiddev96,hidraw0: USB HID v1.11 Device [Player One Player One Filter Switch] on usb-0000:00:14.0-1.2/input0
[ 4744.892095] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.892113] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.892120] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.892126] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.892132] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.892138] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.892144] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.892150] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.892156] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.892162] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.892167] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.892173] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.892179] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.912781] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.912977] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.913022] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.933543] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.933765] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.933803] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.954403] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.954699] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4744.954756] usb 2-1: usbfs: usb_submit_urb returned -19
[ 4745.141177] usb 2-1: USB disconnect, device number 3
[ 4745.380984] usb 2-1: new SuperSpeed USB device number 4 using xhci_hcd
[ 4745.398604] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[ 4745.398611] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4745.398612] usb 2-1: Product: Ceres 462M
[ 4745.398613] usb 2-1: Manufacturer: Player One
[ 5080.416022] usb 2-1: usbfs: usb_submit_urb returned -19
[ 5080.654266] usb 2-1: USB disconnect, device number 4
[ 5080.890844] usb 2-1: new SuperSpeed USB device number 5 using xhci_hcd
[ 5080.905259] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[ 5080.905264] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5080.905266] usb 2-1: Product: Ceres 462M
[ 5080.905267] usb 2-1: Manufacturer: Player One
[ 5304.114970] usb 2-1: USB disconnect, device number 5
[ 5304.351702] usb 2-1: new SuperSpeed USB device number 6 using xhci_hcd
[ 5304.366308] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[ 5304.366325] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5304.366329] usb 2-1: Product: Ceres 462M
[ 5304.366333] usb 2-1: Manufacturer: Player One
[ 5521.391905] usb 1-1.2: USB disconnect, device number 8
[ 5532.959210] usb 1-1.2: new full-speed USB device number 9 using xhci_hcd
[ 5533.041218] usb 1-1.2: New USB device found, idVendor=a0a0, idProduct=f001, bcdDevice= 2.00
[ 5533.041231] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5533.041236] usb 1-1.2: Product: Player One Filter Switch
[ 5533.041239] usb 1-1.2: Manufacturer: Player One
[ 5533.041241] usb 1-1.2: SerialNumber: 6D8D38935271
[ 5533.047353] hid-generic 0003:A0A0:F001.0004: hiddev96,hidraw0: USB HID v1.11 Device [Player One Player One Filter Switch] on usb-0000:00:14.0-1.2/input0
[ 5584.634658] usb 1-1: USB disconnect, device number 2
[ 5584.634672] usb 1-1.2: USB disconnect, device number 9
[ 5584.898677] usb 4-1: USB disconnect, device number 2
[ 5602.614961] usb 1-1: new high-speed USB device number 10 using xhci_hcd
[ 5602.746330] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.60
[ 5602.746347] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5602.746353] usb 1-1: Product: USB2.0 Hub
[ 5602.748923] hub 1-1:1.0: USB hub found
[ 5603.031681] usb 1-1.2: new full-speed USB device number 11 using xhci_hcd
[ 5603.113737] usb 1-1.2: New USB device found, idVendor=a0a0, idProduct=f001, bcdDevice= 2.00
[ 5603.113753] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5603.113759] usb 1-1.2: Product: Player One Filter Switch
[ 5603.113764] usb 1-1.2: Manufacturer: Player One
[ 5603.113767] usb 1-1.2: SerialNumber: 6D8D38935271
[ 5603.121556] hid-generic 0003:A0A0:F001.0005: hiddev96,hidraw0: USB HID v1.11 Device [Player One Player One Filter Switch] on usb-0000:00:14.0-1.2/input0
[ 5603.401846] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[ 5603.416728] usb 4-1: New USB device found, idVendor=a0a0, idProduct=5335, bcdDevice= 0.00
[ 5603.416746] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5603.416751] usb 4-1: Product: Ares-M PRO
[ 5603.416756] usb 4-1: Manufacturer: Player One
[ 5633.519721] usb 1-1.2: USB disconnect, device number 11
[ 5640.517969] usb 1-1.2: new full-speed USB device number 12 using xhci_hcd
[ 5640.606547] usb 1-1.2: New USB device found, idVendor=a0a0, idProduct=f001, bcdDevice= 2.00
[ 5640.606561] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5640.606566] usb 1-1.2: Product: Player One Filter Switch
[ 5640.606569] usb 1-1.2: Manufacturer: Player One
[ 5640.606572] usb 1-1.2: SerialNumber: 6D8D38935271
[ 5640.613604] hid-generic 0003:A0A0:F001.0006: hiddev96,hidraw0: USB HID v1.11 Device [Player One Player One Filter Switch] on usb-0000:00:14.0-1.2/input0
[ 5692.812262] usb 4-1: USB disconnect, device number 3
[ 5692.864327] usb 1-1: USB disconnect, device number 10
[ 5692.864339] usb 1-1.2: USB disconnect, device number 12
[ 5693.570771] usb 1-1: new high-speed USB device number 13 using xhci_hcd
[ 5693.702678] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.60
[ 5693.702682] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5693.702684] usb 1-1: Product: USB2.0 Hub
[ 5693.703974] hub 1-1:1.0: USB hub found
[ 5693.980752] usb 1-1.2: new full-speed USB device number 14 using xhci_hcd
[ 5694.062731] usb 1-1.2: New USB device found, idVendor=a0a0, idProduct=f001, bcdDevice= 2.00
[ 5694.062736] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5694.062737] usb 1-1.2: Product: Player One Filter Switch
[ 5694.062738] usb 1-1.2: Manufacturer: Player One
[ 5694.062739] usb 1-1.2: SerialNumber: 6D8D38935271
[ 5694.068921] hid-generic 0003:A0A0:F001.0007: hiddev96,hidraw0: USB HID v1.11 Device [Player One Player One Filter Switch] on usb-0000:00:14.0-1.2/input0
[ 5694.380844] usb 1-1.4: new high-speed USB device number 15 using xhci_hcd
[ 5694.461812] usb 1-1.4: New USB device found, idVendor=a0a0, idProduct=5335, bcdDevice= 0.00
[ 5694.461830] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5694.461835] usb 1-1.4: Product: Ares-M PRO
[ 5694.461839] usb 1-1.4: Manufacturer: Player One
[10831.060462] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.060780] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.060809] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.060825] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.060839] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.060853] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.060866] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.060880] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.060894] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.060907] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.060921] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.060934] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.060947] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.060960] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.081490] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.081719] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.081776] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.102132] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.102250] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.102269] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.122673] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.122724] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.122731] usb 2-1: usbfs: usb_submit_urb returned -19
[10831.313838] usb 2-1: USB disconnect, device number 6
[10831.557349] usb 2-1: new SuperSpeed USB device number 7 using xhci_hcd
[10831.572351] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[10831.572376] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[10831.572385] usb 2-1: Product: Ceres 462M
[10831.572391] usb 2-1: Manufacturer: Player One
[11184.371914] usb 2-1: usbfs: usb_submit_urb returned -19
[11184.373328] usb 2-1: usbfs: usb_submit_urb returned -19
[11184.593667] usb 2-1: USB disconnect, device number 7
[11184.830465] usb 2-1: new SuperSpeed USB device number 8 using xhci_hcd
[11184.845771] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[11184.845799] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[11184.845810] usb 2-1: Product: Ceres 462M
[11184.845818] usb 2-1: Manufacturer: Player One

It's basically an astro photography rig that I'm using with KStars/EKOS and indilib.

I have noticed something similar too with my ethernet NIC connected to USBC connector

Relevant information might be that my laptop is a Lenovo P1 Gen5. I also seem to have a problem with this laptop when I close the lid, it kernel panics and then I need to recover the whole OS. I'm sure that's a different setting and fix but I'm just putting it out there....

Having heard back from the manufacturer they suggested to add usb.autosuspend=-1 to the kernel line, so here's my grub.cfg file:

cat /boot/grub/grub.cfg | grep usb
	linux	/vmlinuz-linux-lts root=PARTUUID=070ba645-02 rw  loglevel=3 quiet usbcore.autosuspend=-1
		linux	/vmlinuz-linux-lts root=PARTUUID=070ba645-02 rw  loglevel=3 quiet usbcore.autosuspend=-1
		linux	/vmlinuz-linux-lts root=PARTUUID=070ba645-02 rw  loglevel=3 quiet usbcore.autosuspend=-1
		linux	/vmlinuz-linux root=PARTUUID=070ba645-02 rw  loglevel=3 quiet usbcore.autosuspend=-1
  menuentry 'USB CD (EFI BootNext)' --class usb --class os $menuentry_id_option 'efi-bootnext-001C' {
  menuentry 'USB FDD (EFI BootNext)' --class usb --class os $menuentry_id_option 'efi-bootnext-001D' {
  menuentry 'USB HDD (EFI BootNext)' --class usb --class os $menuentry_id_option 'efi-bootnext-0021' {

Sadly the other day the issue appeared again, though only a single time and didn't effect the imaging session as previously:

[140670.525488] usb 2-1: USB disconnect, device number 3
[140670.762359] usb 2-1: new SuperSpeed USB device number 4 using xhci_hcd
[140670.780411] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[140670.780441] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[140670.780453] usb 2-1: Product: Ceres 462M
[140670.780462] usb 2-1: Manufacturer: Player One
[140671.078781] usb 2-1: USB disconnect, device number 4
[140671.315493] usb 2-1: new SuperSpeed USB device number 5 using xhci_hcd
[140671.330576] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[140671.330607] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[140671.330619] usb 2-1: Product: Ceres 462M
[140671.330627] usb 2-1: Manufacturer: Player One
[140671.442352] usb 2-1: usbfs: usb_submit_urb returned -19
[140671.574414] usb 2-1: disable of device-initiated U1 failed.
[140671.574928] usb 2-1: enable of device-initiated U1 failed.
[140671.574969] usb 2-1: usbfs: usb_submit_urb returned -19
[140671.574981] usb 2-1: usbfs: usb_submit_urb returned -19
[140671.574985] usb 2-1: usbfs: usb_submit_urb returned -19
[140671.574988] usb 2-1: usbfs: usb_submit_urb returned -19
[140671.574991] usb 2-1: usbfs: usb_submit_urb returned -19
[140671.579172] usb 2-1: disable of device-initiated U1 failed.
[140671.580000] usb 2-1: enable of device-initiated U1 failed.
[140671.715218] usb 2-1: USB disconnect, device number 5
[140672.242240] usb 2-1: new SuperSpeed USB device number 6 using xhci_hcd
[140672.260542] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[140672.260573] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[140672.260586] usb 2-1: Product: Ceres 462M
[140672.260595] usb 2-1: Manufacturer: Player One

I was instructed to capture a `lsusb -t` at the time of it happening:

lsusb -t
/:  Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/12p, 480M
    |__ Port 001: Dev 008, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 002: Dev 009, If 0, Class=Human Interface Device, Driver=usbfs, 12M
        |__ Port 004: Dev 010, If 0, Class=Vendor Specific Class, Driver=usbfs, 480M
    |__ Port 006: Dev 002, If 0, Class=Vendor Specific Class, Driver=[none], 12M
    |__ Port 007: Dev 011, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
    |__ Port 008: Dev 003, If 0, Class=Video, Driver=uvcvideo, 480M
    |__ Port 008: Dev 003, If 1, Class=Video, Driver=uvcvideo, 480M
    |__ Port 008: Dev 003, If 2, Class=Video, Driver=uvcvideo, 480M
    |__ Port 008: Dev 003, If 3, Class=Video, Driver=uvcvideo, 480M
    |__ Port 008: Dev 003, If 4, Class=Application Specific Interface, Driver=[none], 480M
    |__ Port 010: Dev 004, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 010: Dev 004, If 1, Class=Wireless, Driver=btusb, 12M
/:  Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/4p, 10000M
    |__ Port 001: Dev 006, If 0, Class=Vendor Specific Class, Driver=[none], 5000M
/:  Bus 003.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/2p, 480M
/:  Bus 004.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/2p, 10000M

Right now I've just gone through these old threads:

https://bbs.archlinux.org/viewtopic.php?id=185465

https://bbs.archlinux.org/viewtopic.php?id=150114

and it seems that powersaving mode is still active?

for d in /sys/bus/usb/devices/[0-9]* ; do if [[ -e $d/product ]] ; then echo -e "`basename $d`\t`cat $d/power/control`\t`cat $d/speed`\t`cat $d/product`" ; fi ; done
1-1	auto	480	USB2.0 Hub
1-1.2	on	12	Player One Filter Switch
1-1.4	on	480	Ares-M PRO
1-7	on	12	CP2102N USB to UART Bridge Controller
1-8	auto	480	Integrated Camera
2-1	on	5000	Ceres 462M

cat /proc/config.gz| gunzip | grep CONFIG_USB_SU   
CONFIG_USB_SUPPORT=y

Google suggested this:

2. Disable USB 3.0 Link Power Management (LPM) via udev or Kernel Parameters
If the hardware functions normally otherwise and the log spam is the main issue, you can disable U1/U2 LPM for the specific vendor/product ID or globally. [1]

    You can add udev rules targeting the specific device attributes (ATTR{power/usb3_hardware_lpm_u1}="disabled").
    Alternatively, for specific embedded or driver issues, kernel quirks or device tree flags (such as snps,usb2-lpm-disable) are often applied

but I'm not sure what the best fix is or if something is being overridden in the bios if it can do that?

Would anyone be able to suggest anything?

Thanks.

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 78,278

Re: Constant USB device disconnects

they suggested to add usb.autosuspend=-1

Luckily the commandline says they suggested something different.

I was instructed to capture a `lsusb -t` at the time of it happening:

Please make that

lsusb -tv

I also seem to have a problem with this laptop when I close the lid, it kernel panics and then I need to recover the whole OS.

I assume closing the lid will induce some form  of sleep state (S3/s2idle) and you later fail to wake up from that?

[ 3027.559276] usb 2-1: USB disconnect, device number 2
[ 3929.583916] usb 1-1.2: USB disconnect, device number 4
[ 4745.141177] usb 2-1: USB disconnect, device number 3
[ 5080.654266] usb 2-1: USB disconnect, device number 4
[ 5304.114970] usb 2-1: USB disconnect, device number 5
[ 5521.391905] usb 1-1.2: USB disconnect, device number 8
[ 5584.634658] usb 1-1: USB disconnect, device number 2
[ 5584.634672] usb 1-1.2: USB disconnect, device number 9
[ 5584.898677] usb 4-1: USB disconnect, device number 2
[ 5633.519721] usb 1-1.2: USB disconnect, device number 11
[ 5692.812262] usb 4-1: USB disconnect, device number 3
[ 5692.864327] usb 1-1: USB disconnect, device number 10
[ 5692.864339] usb 1-1.2: USB disconnect, device number 12
[10831.313838] usb 2-1: USB disconnect, device number 6
[11184.593667] usb 2-1: USB disconnect, device number 7

So the disconnects happen at 60-180 minutes of uptime, that does not sound like your average usbcore autosuspend at all.
Does the notebook run on external power or battery?
Are the "Player One Filter Switch" and "Ares-M PRO" one physical device that shows up as two USB nodes or are they attached to an unrelated external hub?
(Though the device that seems to flicker the most is the Ceres 462M)

Google Gemini suggested this:

First check the present state:

tail /sys/bus/usb/devices/*/power/*lpm*

Because of the intermittency, please post your complete system journal for a boot w/ such disconnects, eg.

sudo journalctl -b -1 | nc termbin.com 9999

for the previous (-1) one.
Maybe there's some userspace context to explain the disconnects.

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

JohnnySSH

Member

Registered: 2013-05-04

Posts: 105

Re: Constant USB device disconnects

they suggested to add usb.autosuspend=-1

Luckily the commandline says they suggested something different.

I wrote the wrong the thing! They suggested the correct command which was usbcore.autosuspend=-1

Please make that

lsusb -tv

lsusb -tv
/:  Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/12p, 480M
    ID 1d6b:0002 Linux Foundation 2.0 root hub
    |__ Port 001: Dev 015, If 0, Class=Hub, Driver=hub/4p, 480M
        ID 05e3:0610 Genesys Logic, Inc. Hub
        |__ Port 002: Dev 016, If 0, Class=Human Interface Device, Driver=usbhid, 12M
            ID a0a0:f001  
        |__ Port 004: Dev 017, If 0, Class=Vendor Specific Class, Driver=[none], 480M
            ID a0a0:5335  
    |__ Port 006: Dev 002, If 0, Class=Vendor Specific Class, Driver=[none], 12M
        ID 06cb:00f9 Synaptics, Inc. 
    |__ Port 007: Dev 018, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
        ID 10c4:ea60 Silicon Labs CP210x UART Bridge
    |__ Port 008: Dev 003, If 0, Class=Video, Driver=uvcvideo, 480M
        ID 174f:1812 Syntek 
    |__ Port 008: Dev 003, If 1, Class=Video, Driver=uvcvideo, 480M
        ID 174f:1812 Syntek 
    |__ Port 008: Dev 003, If 2, Class=Video, Driver=uvcvideo, 480M
        ID 174f:1812 Syntek 
    |__ Port 008: Dev 003, If 3, Class=Video, Driver=uvcvideo, 480M
        ID 174f:1812 Syntek 
    |__ Port 008: Dev 003, If 4, Class=Application Specific Interface, Driver=[none], 480M
        ID 174f:1812 Syntek 
    |__ Port 010: Dev 004, If 0, Class=Wireless, Driver=btusb, 12M
        ID 8087:0033 Intel Corp. AX211 Bluetooth
    |__ Port 010: Dev 004, If 1, Class=Wireless, Driver=btusb, 12M
        ID 8087:0033 Intel Corp. AX211 Bluetooth
/:  Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/4p, 10000M
    ID 1d6b:0003 Linux Foundation 3.0 root hub
    |__ Port 001: Dev 013, If 0, Class=Vendor Specific Class, Driver=[none], 5000M
        ID a0a0:4623  
/:  Bus 003.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/2p, 480M
    ID 1d6b:0002 Linux Foundation 2.0 root hub
/:  Bus 004.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/2p, 10000M
    ID 1d6b:0003 Linux Foundation 3.0 root hub

I assume closing the lid will induce some form  of sleep state (S3/s2idle) and you later fail to wake up from that?

Maybe? I need to reinstall the whole system after that though as /lib is usually gone completely....

First check the present state:

tail /sys/bus/usb/devices/*/power/*lpm*

tail /sys/bus/usb/devices/*/power/*lpm*
==> /sys/bus/usb/devices/1-10/power/usb2_hardware_lpm <==
enabled

==> /sys/bus/usb/devices/1-10/power/usb2_lpm_besl <==
4

==> /sys/bus/usb/devices/1-10/power/usb2_lpm_l1_timeout <==
512

==> /sys/bus/usb/devices/2-1/power/usb3_hardware_lpm_u1 <==
enabled

==> /sys/bus/usb/devices/2-1/power/usb3_hardware_lpm_u2 <==
enabled

==> /sys/bus/usb/devices/usb2/power/usb3_hardware_lpm_u1 <==
disabled

==> /sys/bus/usb/devices/usb2/power/usb3_hardware_lpm_u2 <==
disabled

==> /sys/bus/usb/devices/usb4/power/usb3_hardware_lpm_u1 <==
disabled

==> /sys/bus/usb/devices/usb4/power/usb3_hardware_lpm_u2 <==
disabled

Because of the intermittency, please post your complete system journal for a boot w/ such disconnects, eg.

sudo journalctl -b -1 | nc termbin.com 9999
for the previous (-1) one.
Maybe there's some userspace context to explain the disconnects.

I'll need to check that when there is a disconnect next.... for now I get this:

journalctl -b -1 | nc termbin.com 9999
https://termbin.com/2jwm

JohnnySSH

Member

Registered: 2013-05-04

Posts: 105

Re: Constant USB device disconnects

It's just done it again:

[265098.944733] usb 2-1: Product: Ceres 462M
[265098.944734] usb 2-1: Manufacturer: Player One
[265109.450317] usb 2-1: USB disconnect, device number 9
[265109.687013] usb 2-1: new SuperSpeed USB device number 10 using xhci_hcd
[265109.701350] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[265109.701355] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[265109.701356] usb 2-1: Product: Ceres 462M
[265109.701357] usb 2-1: Manufacturer: Player One
[265638.026959] usb 2-1: USB disconnect, device number 10
[265638.263364] usb 2-1: new SuperSpeed USB device number 11 using xhci_hcd
[265638.278005] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[265638.278009] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[265638.278010] usb 2-1: Product: Ceres 462M
[265638.278011] usb 2-1: Manufacturer: Player One
[265667.196835] usb 2-1: USB disconnect, device number 11
[265667.440124] usb 2-1: new SuperSpeed USB device number 12 using xhci_hcd
[265667.454409] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[265667.454414] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[265667.454415] usb 2-1: Product: Ceres 462M
[265667.454416] usb 2-1: Manufacturer: Player One
[273712.185056] usb 2-1: USB disconnect, device number 12
[273712.421650] usb 2-1: new SuperSpeed USB device number 13 using xhci_hcd
[273712.435952] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[273712.435956] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[273712.435957] usb 2-1: Product: Ceres 462M
[273712.435958] usb 2-1: Manufacturer: Player One
[273783.495032] usb 2-1: USB disconnect, device number 13
[273783.731678] usb 2-1: new SuperSpeed USB device number 14 using xhci_hcd
[273783.746160] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[273783.746164] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[273783.746166] usb 2-1: Product: Ceres 462M
[273783.746166] usb 2-1: Manufacturer: Player One
[278878.993877] usb 2-1: USB disconnect, device number 14
[278879.237137] usb 2-1: new SuperSpeed USB device number 15 using xhci_hcd
[278879.251663] usb 2-1: New USB device found, idVendor=a0a0, idProduct=4623, bcdDevice= 0.00
[278879.251668] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[278879.251669] usb 2-1: Product: Ceres 462M
[278879.251670] usb 2-1: Manufacturer: Player One

from the log I found this:

usb Device not responding to setup address.

Google suggests this:

The "Device not responding to setup address" error (often paired with kernel error -71 or -32) means the host controller can talk to the USB device initially, but the device fails to acknowledge or accept the unique address assigned to it during the enumeration process.

Common Causes

• Hardware or Port Damage: Bent pins, dust, or physical wear inside the USB port or connector.
• Faulty Cables or Hubs: A broken extension cable, a bad USB hub dropping power or data packets, or poor soldering on custom/DIY hardware.
• Power Insufficiency: The USB port or hub cannot supply enough steady voltage or current during the handshake.
• Firmware or Signal Timing Issues: In custom microcontrollers (like STM32, AVR, or custom PCBs), poor crystal/oscillator stability or data line (D+/D- or CCx) misconfigurations.

No idea....

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 78,278

Re: Constant USB device disconnects

So two devices are attached to an external genesys hubon USB 2, one's attached to the USB  3 port and there's also a CP2102N serial adapter that also drops out.
Then there's a constant stream of wifi re-keying (and related warnings)…

Oct 09 04:20:28 P1G5 pulseaudio[1395]: [pulseaudio] backend-native.c: Battery Level: 100%
Oct 09 04:20:40 P1G5 pulseaudio[1395]: [pulseaudio] backend-native.c: Battery Level: 90%

and it seems you're on battery?

==> Can you radically simplify the setup for a test to see whether you can stabilize the system?
1. Run on external power, the firmware might just figure that the device has sucked enough energy and cut power to see whether that's bogus
2. no wifi, disable it and bluetooth in the UEFI settings if you can
3. Remove the external hub and use just one device directly on the USB2 port and none on the USB3 one

Sidebars:

Oct 08 03:45:51 archlinux kernel: Low-power S0 idle used by default for system suspend

The system technically won't sleep this way (there's some benefit to S0, but you're not saving much) - according to google™ LENOVO 21DCCTO1WW/21DCCTO1WW should™ support s2idle?

as /lib is usually gone completely.

https://wiki.archlinux.org/title/Solid_ … leshooting - but might also be a btrfs related issue

Oct 08 03:45:51 archlinux kernel:  nvme0n1: p1
Oct 08 03:45:51 archlinux kernel: nvme nvme1: 14/0/0 default/read/poll queues
Oct 08 03:45:51 archlinux kernel:  nvme1n1: p1 p2 p3 p4

Is there a parallel windows installation?

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

JohnnySSH

Member

Registered: 2013-05-04

Posts: 105

Re: Constant USB device disconnects

and it seems you're on battery?

No! I take the system outside which then I need to obviously unplug it then I re-plug it in to mains.... unless there's a need the system is always on mains!!

1. Run on external power, the firmware might just figure that the device has sucked enough energy and cut power to see whether that's bogus
2. no wifi, disable it and bluetooth in the UEFI settings if you can
3. Remove the external hub and use just one device directly on the USB2 port and none on the USB3 one

1. as suggested I'm always on mains unless taking the machine to a different location
2. I'll look into this. By UEFI settings do you mean BIOS directly?
3. There is no external hub?

-> I have 2 x USB C ports where one device is plugged in, and I have 2x USB A 3.x ports in which I have 2x devices plugged in!! - the only thing I can think of here is that one of the cameras has an extra USBC port which the Filter Wheel is plugged into
Are you referring to that?

Is there a parallel windows installation?

No! I have 2x NVMe drives.... one main with Arch and the other is pure storage. Both formatted in JFS though that shouldn't matter

JohnnySSH

Member

Registered: 2013-05-04

Posts: 105

Re: Constant USB device disconnects

Just to add.... in the meantime I created a UDEV rule to disable the U1/U2 on USB:

cat 50-usb-lpm.rules 
ACTION=="add|change", KERNEL=="2-1", SUBSYSTEM=="usb", ATTR{idVendor}=="a0a0", ATTR{idProduct}=="4623", ATTR{power/usb3_hardware_lpm_u1}="disabled", ATTR{power/usb3_hardware_lpm_u2}="disabled"

udevadm control --reload
udevadm trigger

after reload:

==> /sys/bus/usb/devices/2-1/power/usb3_hardware_lpm_u1 <==
enabled

==> /sys/bus/usb/devices/2-1/power/usb3_hardware_lpm_u2 <==
enabled

I can't disable them at all??

Could this be the issue? Or is it specifically something else?

Ps. you also ask about the Wifi disconnects.... I am using a very old Cisco WLC which I'm sure is about 20+ years old now. so that might be the reason?? I have the same problem with all wifi devices unfortunately

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 78,278

Re: Constant USB device disconnects

2. I'll look into this. By UEFI settings do you mean BIOS directly?

Yup.

I can think of here is that one of the cameras has an extra USBC port which the Filter Wheel is plugged into

The secondary hub might be a detail of the notebook - you can check lsusb -tv w/o the devices plugged in to see whether the hub is still there.

Nevertheless, try to use one of the devices only to see whether that remains stable.

I can't disable them at all??

I suspect that the rule hits before the interface is set up…

echo disabled | sudo tee /sys/bus/usb/devices/2-1/power/usb3_hardware_lpm_u1

https://askubuntu.com/a/1459634

nb. that this is a USB3 only thing and two of the struggling devices are attached via USB2

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

JohnnySSH

Member

Registered: 2013-05-04

Posts: 105

Re: Constant USB device disconnects

I'll check the BIOS out later today....

It's kinda weird but I still feel that this system isn't fully supported as there are really odd things like the keyboard not working properly sometimes.... I type and key presses don't get read etc....

I tried the command you suggested before in a different thread!

This is the result:

# echo disabled | sudo tee /sys/bus/usb/devices/2-1/power/usb3_hardware_lpm_u1
tee: /sys/bus/usb/devices/2-1/power/usb3_hardware_lpm_u1: Permission denied
disabled

Run as root.... file has rrr permissions.

nb. that this is a USB3 only thing and two of the struggling devices are attached via USB2

What? Hang on I'll need to check that out!

I'm guessing the Filter Wheel, which is the other? The Ceres device?

Ah.... before I forget I should mention, earlier I attached a USB SSD drive to the remaining USBC port.

The system ended up in Kernel Panic!

I ended up having to reboot as the disk stop functioning

JohnnySSH

Member

Registered: 2013-05-04

Posts: 105

Re: Constant USB device disconnects

Uh here we are again :-(

[ 7904.514928] pcieport 0000:00:1d.0: AER: Uncorrectable (Fatal) error message received from 0000:20:00.0
[ 7904.514935] pcieport 0000:20:00.0: AER: PCIe Bus Error: severity=Uncorrectable (Fatal), type=Inaccessible, (Unregistered Agent ID)
[ 7904.571275] thunderbolt 0000:22:00.0: AER: can't recover (no error_detected callback)
[ 7904.571288] xhci_hcd 0000:56:00.0: AER: can't recover (no error_detected callback)
[ 7904.705658] pcieport 0000:00:1d.0: AER: Root Port link has been reset (0)
[ 7904.705766] pcieport 0000:00:1d.0: AER: device recovery failed
[ 7904.705778] pcieport 0000:00:1d.0: AER: Uncorrectable (Non-Fatal) error message received from 0000:00:1d.0
[ 7904.705791] pcieport 0000:00:1d.0: PCIe Bus Error: severity=Uncorrectable (Non-Fatal), type=Transaction Layer, (Receiver ID)
[ 7904.705794] pcieport 0000:00:1d.0:   device [8086:51b0] error status/mask=00300000/00004000
[ 7904.705798] pcieport 0000:00:1d.0:    [20] UnsupReq              
[ 7904.705801] pcieport 0000:00:1d.0:    [21] ACSViol                (First)
[ 7904.705805] pcieport 0000:00:1d.0: AER:   TLP Header: 0x34000000 0x00000010 0x00000000 0x00000000
[ 7904.705834] thunderbolt 0000:22:00.0: AER: can't recover (no error_detected callback)
[ 7904.705851] xhci_hcd 0000:56:00.0: AER: can't recover (no error_detected callback)
[ 7904.705915] pcieport 0000:00:1d.0: AER: device recovery failed
[ 7904.705924] pcieport 0000:00:1d.0: pciehp: Slot(8): Link Down/Up ignored
[ 7904.705955] pcieport 0000:21:01.0: pciehp: pcie_do_write_cmd: no response from device
[ 7904.709067] pcieport 0000:21:01.0: Unable to change power state from D0 to D3hot, device inaccessible
[ 7904.709100] pcieport 0000:21:03.0: pciehp: pcie_do_write_cmd: no response from device
[ 7904.711604] pcieport 0000:21:03.0: Unable to change power state from D0 to D3hot, device inaccessible
[ 7923.486596] thunderbolt 0000:22:00.0: Unable to change power state from D0 to D3hot, device inaccessible
[ 7923.488893] pcieport 0000:21:00.0: Unable to change power state from D0 to D3hot, device inaccessible
[ 7935.909143] sd 0:0:0:0: [sda] tag#14 uas_eh_abort_handler 0 uas-tag 13 inflight: CMD OUT 
[ 7935.909162] sd 0:0:0:0: [sda] tag#14 CDB: Write(10) 2a 00 06 a4 d5 58 00 04 00 00
[ 7935.909180] xhci_hcd 0000:56:00.0: xHCI host controller not responding, assume dead
[ 7935.909227] xhci_hcd 0000:56:00.0: HC died; cleaning up
[ 7935.909262] usb 4-2: cmd cmplt err -108
[ 7935.909270] usb 4-2: cmd cmplt err -108
[ 7935.909273] usb 4-2: cmd cmplt err -108
[ 7935.909276] usb 4-2: cmd cmplt err -108
[ 7935.909279] usb 4-2: cmd cmplt err -108
[ 7935.909282] usb 4-2: cmd cmplt err -108
[ 7935.909286] usb 4-2: cmd cmplt err -108
[ 7935.909288] usb 4-2: cmd cmplt err -108
[ 7935.909354] sd 0:0:0:0: [sda] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD 
[ 7935.909359] sd 0:0:0:0: [sda] tag#11 CDB: Write(10) 2a 00 06 a4 d1 58 00 04 00 00
[ 7935.909364] sd 0:0:0:0: [sda] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD 
[ 7935.909368] sd 0:0:0:0: [sda] tag#10 CDB: Write(10) 2a 00 06 a4 d0 00 00 01 58 00
[ 7935.909373] sd 0:0:0:0: [sda] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD 
[ 7935.909376] sd 0:0:0:0: [sda] tag#9 CDB: Write(10) 2a 00 06 a4 cc 00 00 04 00 00
[ 7935.909381] sd 0:0:0:0: [sda] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD 
[ 7935.909384] sd 0:0:0:0: [sda] tag#8 CDB: Write(10) 2a 00 06 a4 c8 00 00 04 00 00
[ 7935.909389] sd 0:0:0:0: [sda] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD 
[ 7935.909392] sd 0:0:0:0: [sda] tag#7 CDB: Write(10) 2a 00 06 a4 c4 38 00 03 c8 00
[ 7935.909396] sd 0:0:0:0: [sda] tag#6 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD 
[ 7935.909399] sd 0:0:0:0: [sda] tag#6 CDB: Write(10) 2a 00 06 a4 c0 30 00 00 08 00
[ 7935.909403] sd 0:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD 
[ 7935.909407] sd 0:0:0:0: [sda] tag#5 CDB: Read(10) 28 00 57 92 c4 00 00 04 00 00
[ 7935.909411] sd 0:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD 
[ 7935.909414] sd 0:0:0:0: [sda] tag#4 CDB: Write(10) 2a 00 06 a4 c0 38 00 04 00 00
[ 7935.909418] sd 0:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD 
[ 7935.909421] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 57 92 d4 00 00 04 00 00
[ 7935.909425] sd 0:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD 
[ 7935.909429] sd 0:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 57 92 d0 00 00 04 00 00
[ 7935.909433] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD 
[ 7935.909436] sd 0:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 57 92 cc 00 00 04 00 00
[ 7935.909440] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD 
[ 7935.909443] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 57 92 c8 00 00 04 00 00
[ 7935.909481] usb 4-2: USB disconnect, device number 2
[ 7935.949134] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 7935.949145] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 7935.949148] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 7935.949151] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 7935.949154] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 7935.949156] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 7935.949159] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 7935.949161] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 7935.949163] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 7935.949165] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 7935.949168] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 7935.949170] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 7935.949172] sd 0:0:0:0: Device offlined - not ready after error recovery
[ 7935.949187] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=31s
[ 7935.949192] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 57 92 c8 00 00 04 00 00
[ 7935.949195] I/O error, dev sda, sector 1469237248 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2
[ 7935.949218] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=31s
[ 7935.949222] sd 0:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 57 92 cc 00 00 04 00 00
[ 7935.949224] I/O error, dev sda, sector 1469238272 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2
[ 7935.949234] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=31s
[ 7935.949237] sd 0:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 57 92 d0 00 00 04 00 00
[ 7935.949239] I/O error, dev sda, sector 1469239296 op 0x0:(READ) flags 0x84700 phys_seg 128 prio class 2
[ 7935.949248] sd 0:0:0:0: [sda] tag#3 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=31s
[ 7935.949251] sd 0:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 57 92 d4 00 00 04 00 00
[ 7935.949253] I/O error, dev sda, sector 1469240320 op 0x0:(READ) flags 0x80700 phys_seg 128 prio class 2
[ 7935.949273] sd 0:0:0:0: [sda] tag#5 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=31s
[ 7935.949277] sd 0:0:0:0: [sda] tag#5 CDB: Read(10) 28 00 57 92 c4 00 00 04 00 00
[ 7935.949279] I/O error, dev sda, sector 1469236224 op 0x0:(READ) flags 0x80700 phys_seg 128 prio class 2
[ 7935.949383] device offline error, dev sda, sector 111460408 op 0x1:(WRITE) flags 0x4000 phys_seg 128 prio class 2
[ 7935.949398] device offline error, dev sda, sector 111460400 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 2
[ 7935.949404] EXT4-fs warning (device sda1): ext4_end_bio:368: I/O error 16 writing to inode 92536858 starting block 13932550)
[ 7935.949413] Buffer I/O error on device sda1, logical block 13932294
[ 7935.949426] device offline error, dev sda, sector 111461432 op 0x1:(WRITE) flags 0x0 phys_seg 121 prio class 2
[ 7935.949431] EXT4-fs warning (device sda1): ext4_end_bio:368: I/O error 16 writing to inode 92536858 starting block 13932679)
[ 7935.949441] device offline error, dev sda, sector 111462400 op 0x1:(WRITE) flags 0x4000 phys_seg 128 prio class 2
[ 7935.949446] device offline error, dev sda, sector 111463424 op 0x1:(WRITE) flags 0x4000 phys_seg 128 prio class 2
[ 7935.949452] EXT4-fs warning (device sda1): ext4_end_bio:368: I/O error 16 writing to inode 92536858 starting block 13933056)
[ 7935.949545] EXT4-fs (sda1): failed to convert unwritten extents to written extents -- potential data loss!  (inode 92536858, error -5)
[ 7935.949582] Buffer I/O error on device sda1, logical block 13932295
[ 7935.949607] Buffer I/O error on device sda1, logical block 13932296
[ 7935.949608] Buffer I/O error on device sda1, logical block 13932297
[ 7935.949608] Buffer I/O error on device sda1, logical block 13932298
[ 7935.949609] Buffer I/O error on device sda1, logical block 13932299
[ 7935.949610] Buffer I/O error on device sda1, logical block 13932300
[ 7935.949610] Buffer I/O error on device sda1, logical block 13932301
[ 7935.949611] Buffer I/O error on device sda1, logical block 13932302
[ 7935.949611] Buffer I/O error on device sda1, logical block 13932303
[ 7935.949776] EXT4-fs warning (device sda1): ext4_end_bio:368: I/O error 16 writing to inode 92536858 starting block 13933483)
[ 7935.949861] EXT4-fs warning (device sda1): ext4_end_bio:368: I/O error 16 writing to inode 92536858 starting block 13933747)
[ 7935.949944] EXT4-fs warning (device sda1): ext4_end_bio:368: I/O error 16 writing to inode 92536858 starting block 13934244)
[ 7935.949978] EXT4-fs warning (device sda1): ext4_end_bio:368: I/O error 16 writing to inode 92536858 starting block 13934671)
[ 7935.949982] EXT4-fs warning (device sda1): ext4_end_bio:368: I/O error 16 writing to inode 92536858 starting block 13934733)
[ 7935.949990] EXT4-fs (sda1): failed to convert unwritten extents to written extents -- potential data loss!  (inode 92536858, error -5)
[ 7935.950127] Aborting journal on device sda1-8.
[ 7935.950130] Buffer I/O error on dev sda1, logical block 243826688, lost sync page write
[ 7935.950132] JBD2: I/O error when updating journal superblock for sda1-8.
[ 7935.950222] EXT4-fs (sda1): ext4_do_writepages: jbd2_start: 51974 pages, ino 92536858; err -30
[ 7935.950908] EXT4-fs warning (device sda1): ext4_end_bio:368: I/O error 16 writing to inode 92536858 starting block 6066662)
[ 7935.951365] EXT4-fs warning (device sda1): ext4_end_bio:368: I/O error 16 writing to inode 92536858 starting block 6070784)
[ 7935.955433] EXT4-fs error (device sda1): ext4_journal_check_start:87: comm kworker/u56:1: Detected aborted journal
[ 7935.956991] Buffer I/O error on dev sda1, logical block 0, lost sync page write
[ 7935.956993] EXT4-fs (sda1): I/O error while writing superblock
[ 7935.956994] EXT4-fs (sda1): Remounting filesystem read-only
[ 7935.956994] EXT4-fs (sda1): ext4_do_writepages: jbd2_start: 9223372036854741039 pages, ino 92536858; err -30
[ 7936.075862] EXT4-fs (sda1): shut down requested (2)
[ 7936.160010] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7936.445869] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 7936.459251] xhci_hcd 0000:56:00.0: WARN Can't disable streams for endpoint 0x82, streams are being disabled already

JohnnySSH

Member

Registered: 2013-05-04

Posts: 105

Re: Constant USB device disconnects

Ok just checked bios and no usb settings...

One thing I did see is PCIe Tunneling for ThunderBolt 4 which is enabled

So far I just changed the Sleep mode which was set to Windows/Linux to simply Linux S3 - maybe that will help?

seth

Member

From: Won't reply 2 private help req

Registered: 2012-09-03

Posts: 78,278

Re: Constant USB device disconnects

"pcie_aspm=off", https://wiki.archlinux.org/title/Kernel_parameters

I'd suggest to verify principal functionality - if you *only* plug some dumb usb key (no other external USB devices) does that remain stable or eventually falls off the bus as well?

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc