You are not logged in.
I can not figure this out. Please help.
I can not boot into the system after installation. Some installs it comes up with a black screen after some print. Sometimes it goes directly to bios. Essentially I believe that the OS can not find the EFI. fdisk does not seem to recognize that the format of the partition is FAT 32.
I have been formatting and mounting with the following commands in the following order...
# mkfs.ext4 /dev/nvme0n1p3
# mkswap /dev/nvme0n1p2
# mkfs.fat -F 32 /dev/nvme0n1p1
# mount /dev/nvme0n1p3 /mnt
# mkdir /mnt/boot
# mount /dev/nvme0n1p1 /mnt/boot
# swapon /dev/nvme0n1p2
Here is the output from the what I understand are the relevant commands...
root@archiso ~ # arch-chroot -S /mnt
[root@archiso /]# lsblk -f
NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINTS
loop0 squashfs 4.0
sda iso9660 Joliet Extension ARCH_202611 2026-11-01-08-42-25-00
|-sda1 iso9660 Joliet Extension ARCH_202611 2026-11-01-08-42-25-00
`-sda2 vfat FAT32 ARCHISO_EFI 6AE6-FB71
nvme0n1
|-nvme0n1p1 vfat FAT32 59AD-0E3F 833.7M 18% /boot
|-nvme0n1p2 swap 1 b23eb951-51e0-4301-80af-e3bdb8808a1a [SWAP]
`-nvme0n1p3 ext4 1.0 65414fef-d3fd-402f-b7fb-6f1aae9cfef6 877.4G 1% /
[root@archiso /]# fdisk -l
Disk /dev/nvme0n1: 953.87 GiB, 1024209543168 bytes, 2000409264 sectors
Disk model: SAMSUNG MZAL81T0HFLB-00BL2
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: A6F3A0AC-9EBA-41C1-8A20-60B9EB19C024
Device Start End Sectors Size Type
/dev/nvme0n1p1 2048 2099199 2097152 1G Linux filesystem
/dev/nvme0n1p2 2099200 16779263 14680064 7G Linux filesystem
/dev/nvme0n1p3 16779264 2000408575 1983629312 945.9G Linux filesystem
Disk /dev/sda: 7.21 GiB, 7746879488 bytes, 15130624 sectors
Disk model: STORE N GO
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x570787ea
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 64 2350079 2350016 1.1G 0 Empty
/dev/sda2 2350080 2573311 223232 109M ef EFI (FAT-12/16/32)
Disk /dev/loop0: 1.02 GiB, 1094705152 bytes, 2138096 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[root@archiso /]# bootctl install
Running in a chroot, enabling --graceful.
Couldn't find EFI system partition, skipping.
[root@archiso /]# efibootmgr -u
BootCurrent: 0000
Timeout: 0 seconds
BootOrder: 0001,2001,2002,2003
Boot0000* EFI USB Device (VerbatimSTORE N GO) UsbWwid(18a5,302,0,900079FE117B175)/CDROM(1,0x23dc00,0x36840)䍒
Boot0001* GRUB HD(1,GPT,0f0c9f98-e6f4-4b0b-8955-0568af9b8c4a,0x800,0x200000)/\EFI\GRUB\grubx64.efi
Boot2001* EFI USB Device 䍒
Boot2002* EFI DVD/CDROM 䍒
Boot2003* EFI Network
Based off the research from other related posts on this forum I suspect the problem lies in the fdisk -l output in the "TYPE" column for nvme0n1p1 where it is labeled "Linux filesystem". I believe it should say " EFI "
[root@archiso /]# bootctl --path=/boot install
Running in a chroot, enabling --graceful.
File system "/dev/nvme0n1p1" has wrong type for an EFI System Partition (ESP).
[root@archiso /]# find /boot -iname '*efi'
/boot/grub/x86_64-efi
/boot/grub/x86_64-efi/core.efi
/boot/grub/x86_64-efi/grub.efi
/boot/EFI
/boot/EFI/GRUB/grubx64.efi
btw
1 root@archiso ~ # cat /sys/firmware/efi/fw_platform_size
64
Offline
Hi
Yes, I also suspect that is the issue. Can you try to change the partition type GUID from the ISO?
sfdisk --part-type /dev/nvme0n1 1 uefiI hope it helps!
Offline
https://wiki.archlinux.org/title/Systemd-boot
also - please use code tags and update your post in this regard
Last edited by cryptearth (Yesterday 19:24:45)
Offline