You are not logged in.

#1 Yesterday 13:11:34

xiaoyewuz
Member
Registered: 2025-11-02
Posts: 22

[HELP] UHD Blu-ray playback fails while 1080p disc works fine

Hello everyone,

I recently purchased a legitimate retail copy of Avatar: Fire and Ash (Blu-ray + UHD combo). I am trying to play it directly via

mpv bd://

on my Arch Linux system.

The 1080p Blu-ray disc plays perfectly fine (video/audio initializes correctly). However, when I swap to the UHD (4K) disc, playback fails immediately with a format recognition error.

1. Working 1080p Disc (Brief Log)

$ mpv bd://
[bd] List of available titles:
...
[bd] idx: 352 duration: 03:17:20 angles: 1 (playlist: 01648.mpls)
...
● --edition=352 'title: 353 (03:17:20.704) (01648.mpls)'
● Video  --vid=1 (h264 1920x1080 23.976 fps)
● Audio  --aid=1 --alang=eng (dts 6ch 48000 Hz)
AO: [pipewire] 48000Hz 5.1(side) 6ch s32p
VO: [gpu-next] 1920x1080 yuv420p

2. Failing UHD Disc Log

$ mpv bd://
mmc.c:394: AACS not active or supported by the drive
[bd] List of available titles:
...
[bd] idx: 223 duration: 03:17:20 angles: 1 (playlist: 00800.mpls)
...
Failed to recognize file format.
Exiting... (Errors when loading file)

3. bd_info Output for the UHD Disc

$ bd_info /dev/sr0
Using libbluray version 1.5.1
mmc.c:394: AACS not active or supported by the drive
Volume Identifier   : AVATAR_FIRE_AND_ASH
BluRay detected     : yes
First Play supported: yes
Top menu supported  : yes
HDMV titles         : 35
BD-J titles         : 55
UNSUPPORTED titles  : 0

BD-J detected       : yes
Java VM found       : yes
BD-J handled        : yes
BD-J organization ID: 7fff0c8e
BD-J disc ID        : 88000000000000000000000000150131

AACS detected       : yes
libaacs detected    : yes
Disc ID             : D20FF28C324C29A76DA9C40F41119DCC5746E8D5
AACS MKB version    : 82
AACS handled        : yes

BD+ detected        : no

Application info:
  initial mode preference : 2D
  3D content exists       : No
  video format            : 1080p (0x6)
  frame rate              : 23.976 Hz (0x1)
  initial dynamic range   : SDR (0x0)
  provider data           : '                                '

Disc library metadata:
Metadata file       : bdmt_eng.xml
Language            : eng
Disc name           : Avatar: Fire and Ash
Alternative         : <undefined>
Disc #              : 1/1
TOC count           : 1
	Title 1: Avatar: Fire and Ash
Thumbnail count     : 2
	Coral3_Jacket_SML_JFIF.jpg
	Coral3_Jacket_LRG_JFIF.jpg

4. Analysis & Questions

I noticed a contradiction: bd_info reports AACS handled: yes, implying libaacs might have found a matching key in KEYDB.cfg. However, mpv still throws mmc.c:394: AACS not active or supported by the drive and fails to demux the file.

Given that this is a UHD disc with MKB v82, I suspect this is related to AACS 2.0 Bus Encryption requirements or drive firmware-level blocking of the MMC authentication commands, rather than a simple missing key.

Has anyone successfully played newer UHD discs (MKB v80+) on Arch Linux using libbluray/mpv?

Does this strictly require a specific optical drive model with custom firmware (e.g., MakeMKV-flashed LG/ASUS drives) to bypass the AACS 2.0 host certificate check?

Are there any kernel parameters or libbluray configurations I might have missed for enabling proper UHD bus encryption handling?

5. System Information

OS: Arch Linux (fully updated)
Kernel: 7.3.4-arch1-1
mpv version: 1:0.41.0-7 (Arch packaged)
libbluray version: 1.5.1-1 (Arch packaged)
libaacs version: 0.11.1-4 (Arch packaged)
Optical Drive: HL-DT-ST BD-RE BP71N
Drive Firmware Revision: 1.03

Any insights or pointers to relevant documentation would be highly appreciated. Thank you!

Offline

#2 Yesterday 18:54:03

topcat01
Member
Registered: 2019-09-17
Posts: 357

Re: [HELP] UHD Blu-ray playback fails while 1080p disc works fine

Have you followed the wiki instructions?

Offline

Board footer

Powered by FluxBB