You are not logged in.
Please can you post a working xorg.conf file with the following:
1. Single CRT monitor.
2. Commercial NVIDIA driver. I have a GeForce 5600XT.
3. PS/2 mouse.
Thank you.
wickyd
Offline
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Fri Dec 15 10:13:06 PST 2006
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "gb"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Chuntex"
HorizSync 30.0 - 72.0
VertRefresh 50.0 - 130.0
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "720x400" 35.5 720 760 832 936 400 401 404 446 -hsync +vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
Option "DPMS"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GS"
EndSection
Section "Screen"
Option "NoLogo" "true"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1280x1024_60 +0+0; 1024x768 +0+0; 800x600 +0+0; 640x480 +0+0"
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
note: you may also need, xf86-input-mouse ( and xf86-input-keyboard, if you use the 'keyboard' module as well) for the 'mouse' module.
tip: use nvidia-xconfig (fron nvidia*(-kernel|-beyond,-ck,etc if applicable)*)-utils
------
i use a usb mouse, but the same config works if i swap attach the mouse using a usb->ps/2 connector.
Last edited by noriko (2007-02-28 09:50:20)
The.Revolution.Is.Coming - - To fight, To hunger, To Resist!
Offline
I saw these fontpaths added to a sample xorg.conf file, however I don't see this entry in your file. When would the following be necessary:
Section "Files"
RgbPath "/usr/lib/X11/rgb"
ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/ukr"
EndSection
Offline
http://wiki.archlinux.org/index.php/XOr … figuration should explain it all..
The.Revolution.Is.Coming - - To fight, To hunger, To Resist!
Offline
Thank you both for your help.
Offline