You are not logged in.
Pages: 1
Arch 0.8 beta 2
anyone has the similar problem maybe somone can help?
k3b shows me:
System
-----------------------
K3b Version: 1.0rc6
KDE Version: 3.5.6
QT Version: 3.3.8
Kernel: 2.6.20-ARCH
Devices
-----------------------
TSSTcorp CD/DVDW SH-S182D SB02 (/dev/sr0, /dev/sg0) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump]
Used versions
-----------------------
mkisofs: 2.1
growisofs: 7.0
growisofs
-----------------------
Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0'
/dev/sr0: "Current Write Speed" is 4.1x1352KBps.
:-[ WRITE@LBA=0h failed with SK=5h/ASC=64h/ACQ=00h]: Input/output error
:-( attempt to re-run with -dvd-compat -dvd-compat to engage DAO or apply full blanking procedure
:-( write failed: Input/output error
growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/sr0=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:28062 -speed=4 -use-the-force-luke=bufsize:32m
mkisofs
-----------------------
Warning: creating filesystem that does not conform to ISO-9660.
Warning: creating filesystem that does not conform to ISO-9660.
28062
Warning: creating filesystem that does not conform to ISO-9660.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
I: -input-charset not specified, using iso-8859-2 (detected in locale settings)
1.82% done, estimate finish Mon Mar 5 14:18:40 2007
3.59% done, estimate finish Mon Mar 5 14:18:40 2007
5.36% done, estimate finish Mon Mar 5 14:18:40 2007
7.18% done, estimate finish Mon Mar 5 14:18:40 2007
8.95% done, estimate finish Mon Mar 5 14:18:40 2007
10.72% done, estimate finish Mon Mar 5 14:18:40 2007
12.48% done, estimate finish Mon Mar 5 14:18:40 2007
14.31% done, estimate finish Mon Mar 5 14:18:40 2007
16.08% done, estimate finish Mon Mar 5 14:18:40 2007
17.84% done, estimate finish Mon Mar 5 14:18:40 2007
19.61% done, estimate finish Mon Mar 5 14:18:40 2007
21.43% done, estimate finish Mon Mar 5 14:18:40 2007
23.20% done, estimate finish Mon Mar 5 14:18:40 2007
24.97% done, estimate finish Mon Mar 5 14:18:40 2007
26.74% done, estimate finish Mon Mar 5 14:18:40 2007
28.56% done, estimate finish Mon Mar 5 14:18:40 2007
30.33% done, estimate finish Mon Mar 5 14:18:40 2007
32.10% done, estimate finish Mon Mar 5 14:18:40 2007
33.86% done, estimate finish Mon Mar 5 14:18:40 2007
35.69% done, estimate finish Mon Mar 5 14:18:40 2007
37.46% done, estimate finish Mon Mar 5 14:18:40 2007
39.22% done, estimate finish Mon Mar 5 14:18:40 2007
40.99% done, estimate finish Mon Mar 5 14:18:40 2007
42.82% done, estimate finish Mon Mar 5 14:18:40 2007
44.58% done, estimate finish Mon Mar 5 14:18:40 2007
46.35% done, estimate finish Mon Mar 5 14:18:40 2007
48.12% done, estimate finish Mon Mar 5 14:18:40 2007
49.94% done, estimate finish Mon Mar 5 14:18:40 2007
51.71% done, estimate finish Mon Mar 5 14:18:40 2007
53.48% done, estimate finish Mon Mar 5 14:18:40 2007
55.25% done, estimate finish Mon Mar 5 14:18:40 2007
57.07% done, estimate finish Mon Mar 5 14:18:40 2007
mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid netbeans-5_5-linux -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -abstract -copyright -biblio -volset-size 1 -volset-seqno 1 -sort /tmp/kde-chendler/k3bCTIwtb.tmp -rational-rock -hide-list /tmp/kde-chendler/k3bbJMmLb.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-chendler/k3bKKuvDa.tmp -untranslated-filenames -max-iso9660-filenames -iso-level 2 -path-list /tmp/kde-chendler/k3bxF1Pqc.tmp
AND this is debug output
------------------------------
kdecore (KAction): WARNING: KActionCollection::operator+=(): function is severely deprecated.
First sec data area: 43:41:33 (LBA 196608) (402653184
Last sec data area: 00:00:00 (LBA 0) (0 Bytes)
Last sec layer 1: 00:00:00 (LBA 0) (0 Bytes)
Layer 1 length: 00:00:01 (LBA 1) (2048 Bytes)
Layer 2 length: 00:00:00 (LBA 0) (0 Bytes)
DiskInfo:
Mediatype: DVD-RW Sequential
Current Profile: DVD-RW Sequential
Disk state: empty
Empty: 1
Rewritable: 1
Appendable: 0
Sessions: 0
Tracks: 0
Layers: 1
Capacity: 510:46:46 (LBA 2298496) (4707319808 Bytes)
Remaining size: 510:46:46 (LBA 2298496) (4707319808 Bytes)
Used Size: 00:00:00 (LBA 0) (0 Bytes)
(K3bDevice::Device) /dev/sr0: Number of supported write speeds via GET PERFORMANCE: 1
(K3bDevice::Device) /dev/sr0 : 5540 KB/s
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
First sec data area: 43:41:33 (LBA 196608) (402653184
Last sec data area: 00:00:00 (LBA 0) (0 Bytes)
Last sec layer 1: 00:00:00 (LBA 0) (0 Bytes)
Layer 1 length: 00:00:01 (LBA 1) (2048 Bytes)
Layer 2 length: 00:00:00 (LBA 0) (0 Bytes)
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
(K3bDevice::Device) /dev/sr0: Number of supported write speeds via GET PERFORMANCE: 1
(K3bDevice::Device) /dev/sr0 : 5540 KB/s
(K3bDevice::HalConnection) initializing HAL >= 0.5
(K3bDevice::HalConnection) unable to connect to DBUS: Failed to connect to socket /var/run/dbus/system_bus_socket: Nie ma takiego pliku ani katalogu
(K3bDevice::HalConnection) failed to open connection to HAL.
(K3bDevice::HalConnection) initializing HAL >= 0.5
(K3bDevice::HalConnection) unable to connect to DBUS: Failed to connect to socket /var/run/dbus/system_bus_socket: Nie ma takiego pliku ani katalogu
(K3bDevice::HalConnection) failed to open connection to HAL.
(K3bDevice::Device) /dev/sr0 current profile 0. Checking current profile list instead.
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
(K3bDevice::ScsiCommand) failed:
command: READ DISC INFORMATION (51)
errorcode: 70
sense key: NOT READY (2)
asc: 3a
ascq: 2
(K3bDevice::Device) /dev/sr0: READ DISC INFORMATION length det failed
(K3bDevice::Device) /dev/sr0: Device reports bogus disc information length of 0
(K3bDevice::ScsiCommand) failed:
command: READ DISC INFORMATION (51)
errorcode: 70
sense key: NOT READY (2)
asc: 3a
ascq: 2
(K3bDevice::Device) /dev/sr0: READ DISC INFORMATION with real length 32 failed.
(K3bDevice::Device) /dev/sr0 fabricating disk information for a stupid device.
(K3bDevice::Device) /dev/sr0 current profile 0. Checking current profile list instead.
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
(K3bDevice::ScsiCommand) failed:
command: READ DISC INFORMATION (51)
errorcode: 70
sense key: NOT READY (2)
asc: 3a
ascq: 2
(K3bDevice::Device) /dev/sr0: READ DISC INFORMATION length det failed
(K3bDevice::Device) /dev/sr0: Device reports bogus disc information length of 0
(K3bDevice::ScsiCommand) failed:
command: READ DISC INFORMATION (51)
errorcode: 70
sense key: NOT READY (2)
asc: 3a
ascq: 2
(K3bDevice::Device) /dev/sr0: READ DISC INFORMATION with real length 32 failed.
(K3bDevice::Device) could not get session info via READ TOC/PMA/ATIP.
(K3bDevice::ScsiCommand) failed:
command: READ CAPACITY (25)
errorcode: 70
sense key: NOT READY (2)
asc: 3a
ascq: 2
(K3bDevice::Device) /dev/sr0 Falling back to readToc for capacity.
(K3bDevice::Device) /dev/sr0 current profile 0. Checking current profile list instead.
(K3bDevice::Device) /dev/sr0: GET CONFIGURATION length det failed.
(K3bDevice::ScsiCommand) failed:
command: READ CAPACITY (25)
errorcode: 70
sense key: NOT READY (2)
asc: 3a
ascq: 2
(K3bDevice::ScsiCommand) failed:
command: READ TRACK INFORMATION (52)
errorcode: 70
sense key: NOT READY (2)
asc: 3a
ascq: 2
(K3bDevice::Device) /dev/sr0: READ TRACK INFORMATION length det failed.
(K3bDevice::ScsiCommand) failed:
command: READ TRACK INFORMATION (52)
errorcode: 70
sense key: NOT READY (2)
asc: 3a
ascq: 2
(K3bDevice::Device) /dev/sr0: READ TRACK INFORMATION with real length 36 failed.
(K3bDevice::Device) /dev/sr0READ TRACK INFORMATION for DVD-ROM failed.
DiskInfo:
Mediatype: CD-ROM
Current Profile: No media
Disk state: unknown
Empty: 0
Rewritable: 0
Appendable: 0
Sessions: 0
Tracks: 0
Layers: 1
Capacity: 00:00:01 (LBA 1) (2048 Bytes)
Remaining size: 00:00:00 (LBA 0) (0 Bytes)
Used Size: 00:00:01 (LBA 1) (2048 Bytes)
Offline
Pages: 1