You are not logged in.
Pages: 1
my xrandr list
$ xrandr
SZ: Pixels Physical Refresh
*0 1024 x 768 ( 271mm x 201mm ) *85 75 72 70 60 100 90
1 800 x 600 ( 271mm x 201mm ) 85 75 72 70 60 56 100 90
2 720 x 576 ( 271mm x 201mm ) 60
3 640 x 480 ( 271mm x 201mm ) 85 75 72 60 100 90
4 640 x 400 ( 271mm x 201mm ) 75 60
5 400 x 300 ( 271mm x 201mm ) 75 60
6 320 x 240 ( 271mm x 201mm ) 75 60
7 320 x 200 ( 271mm x 201mm ) 75 60
Current rotation - normal
Current reflection - none
Rotations possible - normal
Reflections possible - none
I am pretty sure my monitor manages better Refresh rates that this, how can I add them in the xorg file?
thanks
Offline
Section "Monitor"
...
HorizSync 24.0 - 82.0
VertRefresh 55.0 - 82.0
...
EndSection
Change those.
You can use EDID auto-detection too; google for 'gentoo wiki dual monitor' and that page has examples within it for using EDID.
- Dave
Edit: Btw, make sure you look up the proper sync & refresh values for your monitor; they'll be on the manufacturer/seller's website, and may be on a sticker on the monitor back/base too.
Last edited by KomodoDave (2007-06-02 16:45:53)
Offline
I do not think that is the problem, here pieces of my xorg.conf:
Section "Monitor"
Identifier "Monitor0"
VendorName "Philips"
ModelName "109B4"
# DisplaySize 360 270
DisplaySize 269 201
HorizSync 30.0 - 97.0
VertRefresh 50.0 - 100.0
Option "dpms"
Option "UseEdidDpi" "false"
Option "DPI" "96 x 96"
EndSection
and
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
It is maybe about the `cvt' output program?
Offline
My guess is you are using the nvidia-binary drivers?
Option "UseEdidDpi" "false"
Option "DPI" "96 x 96"
These option should go into the device section for your nvidia-card, not your monitor section.
Stand back, intruder, or i'll blast you out of space! I am Klixon and I don't want any dealings with you human lifeforms. I'm a cyborg!
Offline
Pages: 1