DRI not enabling!

AquaFox · 2007-07-07 17:51:57

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"      # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
#    Load        "type1"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
    Load       "glx"
# This loads the DRI module
    Load       "dri"
    Load     "drm"
EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

#    RgbPath    "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# 

    FontPath   "/usr/share/fonts/misc"
    FontPath   "/usr/share/fonts/100dpi:unscaled"
    FontPath   "/usr/share/fonts/75dpi:unscaled"
    FontPath   "/usr/share/fonts/TTF"
    FontPath   "/usr/share/fonts/Type1"
#    FontPath   "/usr/lib/X11/fonts/local/"
#    FontPath   "/usr/lib/X11/fonts/misc/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/lib/X11/fonts/Type1/"
#    FontPath   "/usr/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/lib/X11/fonts/freefont/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier    "Keyboard1"
    Driver    "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option    "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"    "xorg"
    Option "XkbModel"    "pc101"
    Option "XkbLayout"    "us"
    Option "XkbVariant"    "ar"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier    "Mouse1"
    Driver    "mouse"
    Option "Protocol"    "Auto"    # Auto detect
    Option "Device"      "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"    "Xqueue"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"    "256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"    "9600"
#    Option "SampleRate"    "150"

# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

    Option "ZAxisMapping"   "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "Acer-AL1714"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   22-82

#    HorizSync    30-64         # multisync
#    HorizSync    31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync    15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 56.3-76

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier    "Standard VGA"
    VendorName    "Unknown"
    BoardName    "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam    256

#    Clocks    25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "Ati"
    Driver      "radeon"
    #VideoRam    131072
    # Insert Clocks lines here if appropriate

 Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
       Option "AGPMode" "4"
       Option "ColorTiling" "on"
       Option "EnablePageFlip" "on" 
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "Ati"
    Monitor     "Acer-AL1714"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
Option "AIGLX" "true"

EndSection

Section "DRI"
   Mode 0666
EndSection

The log file:

(==) RADEON(0): Using 24 bit depth buffer
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.0
(II) RADEON(0): [drm] drmSetBusid failed (8, pci:0000:01:00.0), Permission denied
(EE) RADEON(0): [dri] DRIScreenInit failed.  Disabling DRI.
(**) RADEON(0): RADEONInitMemoryMap() : 
(**) RADEON(0):   mem_size         : 0x08000000
(**) RADEON(0):   MC_FB_LOCATION   : 0xefffe800
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1280x1024     135.00  1280 1296 1440 1688  1024 1025 1028 1066 (24,32) +H +V
1280x1024     135.00  1280 1296 1440 1688  1024 1025 1028 1066 (24,32) +H +V
(**) RADEON(0): Pitch = 10485920 bytes (virtualX = 1280, displayWidth = 1280)
(**) RADEON(0): dc=13500, of=27000, fd=120, pd=2
(**) RADEON(0): RADEONInit returns 0x81f77c0
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x81f77c0)
(**) RADEON(0): RADEONRestoreMemMapRegisters() : 
(**) RADEON(0):   MC_FB_LOCATION   : 0xefffe800
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0):   Map Changed ! Applying ...
(**) RADEON(0):   Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x0000000c 0x00010078 0x00000000 (0x0000a700)
(**) RADEON(0): Wrote: rd=12, fd=120, pd=1
(**) RADEON(0): GRPH_BUFFER_CNTL from 20087c7c to 20165c5c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1024) to (1280,1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 7165
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration enabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 160
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): Option "XaaNoOffscreenPixmaps" "true"
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)

glxinfo:

[aquafox@Anubis ~]$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating, 
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method, 
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe, 
    GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, 
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control, 
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, 
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, 
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, 
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer, 
    GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample, 
    GLX_SGIX_fbconfig, GLX_EXT_texture_from_pixmap
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program, 
    GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture, 
    GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite, 
    GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp, 
    GL_ARB_texture_compression, GL_ARB_texture_cube_map, 
    GL_ARB_texture_env_add, GL_ARB_texture_env_combine, 
    GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3, 
    GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two, 
    GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_program, 
    GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, 
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate, 
    GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract, 
    GL_EXT_clip_volume_hint, GL_EXT_copy_texture, GL_EXT_draw_range_elements, 
    GL_EXT_fog_coord, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays, 
    GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_point_parameters, 
    GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color, 
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, 
    GL_EXT_shared_texture_palette, GL_EXT_stencil_wrap, GL_EXT_subtexture, 
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp, 
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine, 
    GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, 
    GL_EXT_texture_mirror_clamp, GL_EXT_texture_object, 
    GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels, 
    GL_ATI_draw_buffers, GL_ATI_texture_env_combine3, 
    GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3, 
    GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, 
    GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_NV_blend_square, 
    GL_NV_fragment_program, GL_NV_light_max_exponent, GL_NV_point_sprite, 
    GL_NV_texgen_reflection, GL_NV_texture_rectangle, GL_NV_vertex_program, 
    GL_NV_vertex_program1_1, GL_SGI_color_matrix, GL_SGI_color_table, 
    GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, 
    GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture, 
    GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0  0 0 None
0x24 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0  0 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x26 24 tc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x27 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0  0 0 None
0x28 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0  0 0 None
0x29 24 dc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x2a 24 dc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None

Was trying to get Compiz working and BOOM.. back to OpenBox and no games for me .

Last edited by AquaFox (2007-07-07 17:52:34)

tom5760 · 2007-07-07 18:35:42

Ok, your xorg.conf is a mess,

Try running the following commands as root:

#Back up your old config
cp /etc/X11/xorg.conf ~/xorg.conf.bak
X -configure
cp xorg.conf.new /etc/X11/xorg.conf

That should get you a fresh clean xorg.conf with the right driver selected and all. If DRI still dosn't work after this, post the contents of /var/log/Xorg.0.log

Free Thinker · 2007-07-13 09:19:42

hmm.. i probably didn't add the user to the right group (anyway i dont know wich), but when i'm running glxgears as root all goes smooth, and when running it as normal user, the graphics are laggy.
what do i need to change for the user?

iphitus · 2007-07-13 10:05:03

gpasswd -a user video

add's the user to the video group.

kth5 · 2007-07-13 10:06:35

The group you need to add yourself to, can easily be found:

ls -l /dev/dri/

It's called video btw.

Free Thinker · 2007-07-13 10:23:10

thx alot!

Hohoho · 2007-07-13 11:39:36

crw-rw-rw- 1 root root 226, 0 2007-07-13 13:54 /dev/dri/card0

How can I change it to video group?

Cerebral · 2007-07-13 11:53:27

Add the following to your xorg.conf:

Section "DRI" 
  # Allow only the video group
  Group        91
  Mode         0660
EndSection

Check /etc/group to make sure that 91 really is video on your system.

Ramses de Norre · 2007-07-13 11:54:39

Hohoho wrote:

crw-rw-rw- 1 root root 226, 0 2007-07-13 13:54 /dev/dri/card0
How can I change it to video group?

You don't want to do that... You don't want regular users to have raw access to your video device, all hard drives and such have similar permissions for the same reason.

Cerebral · 2007-07-13 12:24:27

Ramses de Norre wrote:

Hohoho wrote:
crw-rw-rw- 1 root root 226, 0 2007-07-13 13:54 /dev/dri/card0
How can I change it to video group?
You don't want to do that... You don't want regular users to have raw access to your video device, all hard drives and such have similar permissions for the same reason.

-edit- Whoops, totally misread your post - I've corrected my own now. -edit-

Yes, you definitely don't want regular users raw access - see my xorg.conf modification to fix it.

Last edited by Cerebral (2007-07-13 12:32:54)

Arch Linux

#1 2007-07-07 17:51:57

DRI not enabling!

#2 2007-07-07 18:35:42

Re: DRI not enabling!

#3 2007-07-13 09:19:42

Re: DRI not enabling!

#4 2007-07-13 10:05:03

Re: DRI not enabling!

#5 2007-07-13 10:06:35

Re: DRI not enabling!

#6 2007-07-13 10:23:10

Re: DRI not enabling!

#7 2007-07-13 11:39:36

Re: DRI not enabling!

#8 2007-07-13 11:53:27

Re: DRI not enabling!

#9 2007-07-13 11:54:39

Re: DRI not enabling!

#10 2007-07-13 12:24:27

Re: DRI not enabling!

Board footer