Arch Linux

wollew

Member

Registered: 2007-08-08

Posts: 18

Boot problem with Archlinux 2007.08

Bootprocess whenn booting from CD stops and issues this message:
.....
No new files found to copy .... on media /dev/sda5
NTFS driver 2.1.28 [Flags: R/W MODULE].
NTFS volume version 3.1
The PC booted many Linux-CDs till now (i.e. Archlinux 2007.05). Harddisk partitions are: one NTFS-partition(sda1), one FAT32 partition (sda5) and some EXT3 partitions. Playing around different boot options (ide-legacy, ...) shows the same behaviour. Boot-CD is ok, it works perfectly on another PC.

FUBAR

Member

From: Belgium

Registered: 2004-12-08

Posts: 1,029

Website

Re: Boot problem with Archlinux 2007.08

I've had trouble modprobing the NTFS module on an already installed system aswell: after doing so, my system would be pretty useless and I had to press the reset button to get things sorted out. I don't know if it's possible but try to disable the NTFS-module.

---

A bus station is where a bus stops.
A train station is where a train stops.
On my desk I have a workstation.

wollew

Member

Registered: 2007-08-08

Posts: 18

Re: Boot problem with Archlinux 2007.08

The problem arises at the first boot of the cd on the way to install Archlinux. I think, the only possibilty to intervene is at the boot prompt. I found a post in the forum with a solution (hopefully) for the problem.
http://bbs.archlinux.org/viewtopic.php?id=35951
I'll try this later.

wollew

Member

Registered: 2007-08-08

Posts: 18

Re: Boot problem with Archlinux 2007.08

Same behaviour, tpowa's hint doesn´t help .

cactus

Taco Eater

From: t͈̫̹ͨa͖͕͎̱͈ͨ͆ć̥̖̝o̫̫̼s͈̭̱̞͍̃!̰

Registered: 2004-05-25

Posts: 4,622

Website

Re: Boot problem with Archlinux 2007.08

try adding disablemodules=ntfs to the kernel line in grub..

---

"Be conservative in what you send; be liberal in what you accept." -- Postel's Law
"tacos" -- Cactus' Law
"t̥͍͎̪̪͗a̴̻̩͈͚ͨc̠o̩̙͈ͫͅs͙͎̙͊ ͔͇̫̜t͎̳̀a̜̞̗ͩc̗͍͚o̲̯̿s̖̣̤̙͌ ̖̜̈ț̰̫͓ạ̪͖̳c̲͎͕̰̯̃̈o͉ͅs̪ͪ ̜̻̖̜͕" -- -̖͚̫̙̓-̺̠͇ͤ̃ ̜̪̜ͯZ͔̗̭̞ͪA̝͈̙͖̩L͉̠̺͓G̙̞̦͖O̳̗͍

wollew

Member

Registered: 2007-08-08

Posts: 18

Re: Boot problem with Archlinux 2007.08

Is this a option I can type in after CD has bootet ? The problem arises before installation is started !
By the way, never had any problems with previous versions of ARCHLINUX.

Last edited by wollew (2007-08-10 07:08:39)

FUBAR

Member

From: Belgium

Registered: 2004-12-08

Posts: 1,029

Website

Re: Boot problem with Archlinux 2007.08

You pass kernel options after the computer has detected a bootable CD and displays the boot prompt of it, without actually booting the OS on the CD.

---

A bus station is where a bus stops.
A train station is where a train stops.
On my desk I have a workstation.

Dzaro

Member

Registered: 2006-11-06

Posts: 24

Re: Boot problem with Archlinux 2007.08

had this problem too. i just used older install cd (0.7.2), installed base packages and updated it from don't panic cd
everything ok now

just Don't Panic

Last edited by Dzaro (2007-08-10 13:27:52)

wollew

Member

Registered: 2007-08-08

Posts: 18

Re: Boot problem with Archlinux 2007.08

That's one solution. But it would be interesting, what's the reason for this boot problem and how to solve it. There are a few people having this problem (see the other post).  Version "Don't panic"   nomen est omen, how the old latin people said

Last edited by wollew (2007-08-11 13:21:51)

tpowa

Developer

From: Lauingen , Germany

Registered: 2004-04-05

Posts: 2,328

Re: Boot problem with Archlinux 2007.08

it seems to be a error in ntfs driver in kernel, i don't have ntfs partitions around here because i only use ARCH.
I'll release new Isos with fixed arch-addons soon, i couldn't give you a date now because my time doing arch stuff is very limited atm.
disablehooks=arch-addons should help on commandline, if archboot has not a bug there.

wollew

Member

Registered: 2007-08-08

Posts: 18

Re: Boot problem with Archlinux 2007.08

Good to hear that. But the proposed "disablehooks=arch-addons" doesn't work here definitly at my PC.
Thanks in advance for your work on ARCHLINUX.

rkj

Member

Registered: 2006-12-09

Posts: 2

Re: Boot problem with Archlinux 2007.08

Good to hear that. But the proposed "disablehooks=arch-addons" doesn't work here definitly at my PC.
Thanks in advance for your work on ARCHLINUX.

I have got the same problem. The solution is to use scandisk from windows - after it has done try to install again and it should run smoothly . Have fun!

ekerazha

Member

Registered: 2007-02-27

Posts: 290

Re: Boot problem with Archlinux 2007.08

I have this problem too.

SCANDISK was the old disk checking utility for MS-DOS and I think it only works for FAT/FAT32 drives. The current 2000/XP/Vista tool is CHKDSK, however I've checked my NTFS partitions but the problem is still here.

aka_arch

Member

Registered: 2007-08-17

Posts: 8

Re: Boot problem with Archlinux 2007.08

I had this problem too. It was solved by following steps:
1) at initial boot prompt I entered "arch --disablehooks=arch-addons"
2) it boots normally and I got virtual console prompt. When I tried running "/arch/setup", I found my hard drive is not detected. Then I executed "hwdetect --load-modules" in a separate virtual console. I again did "/arch/setup" and this time everything ran smoothly.

hope it helps.

phoederr

Member

Registered: 2007-08-19

Posts: 4

Re: Boot problem with Archlinux 2007.08

I had this problem too. It was solved by following steps:
1) at initial boot prompt I entered "arch --disablehooks=arch-addons"
2) it boots normally and I got virtual console prompt. When I tried running "/arch/setup", I found my hard drive is not detected. Then I executed "hwdetect --load-modules" in a separate virtual console. I again did "/arch/setup" and this time everything ran smoothly.

hope it helps.

Yes, it really helps. Thank you! It seems that tpowa's advice was lacking those "--" in front of "diablehooks"

Talkless

Member

Registered: 2007-08-14

Posts: 9

Re: Boot problem with Archlinux 2007.08

Thank you, it works!

Hinux

Member

Registered: 2007-08-26

Posts: 9

Re: Boot problem with Archlinux 2007.08

Hi men!

Lamentably I have the same problem... i could initiate with CD ( Following the instructions written before) , but It happens to me something very strange... not recognize me the hard disk with your partitions. I tries to mount them to hand, but not serve ... I give fdisk-l and does not throw anything... someone can help

pD: Pardon for my English. I am Chilean xD.

De ante mano se les agradece

monkd

Member

From: Finland

Registered: 2007-02-11

Posts: 11

Re: Boot problem with Archlinux 2007.08

I had this problem too. It was solved by following steps:
1) at initial boot prompt I entered "arch --disablehooks=arch-addons"
2) it boots normally and I got virtual console prompt. When I tried running "/arch/setup", I found my hard drive is not detected. Then I executed "hwdetect --load-modules" in a separate virtual console. I again did "/arch/setup" and this time everything ran smoothly.

hope it helps.

Well, yes it did. Thank you!