Arch Linux

Ruckus

Member

Registered: 2007-02-17

Posts: 204

Won't detect second screen

My xorg.conf can be seen here: http://pastebin.com/m25cafd6d

My problem is that i can get mergedFB working, but the auto monitor detection always fails and DRI/AIXGL get's disabled.

You can see my X log file here: http://pastebin.com/mfc2d2c7

The part i think is most relevant being this:

(II) RADEON(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(**) RADEON(0): MonitorLayout Option: 
    Monitor1--Type Auto, Monitor2--Type CRT

(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): 
(II) RADEON(0): Primary:
 Monitor   -- CRT
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) RADEON(0): Secondary:
 Monitor   -- NONE
 Connector -- DVI-I
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- Internal
 DDC Type  -- DVI_DDC
(II) RADEON(0): PLL parameters: rf=2700 rd=60 min=12000 max=35000; xclk=14300
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(II) RADEON(0): MergedFB mode forced on.

The second monitor is actually another VGA CRT, and is working in mergedfb mode, but AIGLX/DRI won't work.

Last edited by Ruckus (2007-10-08 21:17:41)