You are not logged in.

Pages: 1 2 3 … 52

#1 2007-11-14 13:41:04

drakosha
Member
Registered: 2006-01-03
Posts: 253
Website

conky configs and screenshots!

I think it's a good idea to post conky config files with screenshots. If you are proud of it wink. Here's mine:
conkyyu8.th.png

background no
use_xft yes
xftfont Bitstream Vera Sans Mono:size=10
xftalpha 0.8
update_interval 5.0
total_run_times 0
own_window yes
own_window_type override
own_window_transparent yes
own_window_colour hotpink
own_window_hints undecorated,below,skip_taskbar,sticky,skip_pager
double_buffer yes
minimum_size 280 5
draw_shades yes
draw_outline no
draw_graph_borders yes
stippled_borders 8
border_margin 4
border_width 1
maximum_width 155
default_color darkgrey
default_shade_color black
default_outline_color black
alignment bottom_right
gap_x 4
gap_y 4
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale no
use_spacer no

TEXT
${color #5b6dad}${alignc}${nodename} ${uptime_short}

${color #5b6dad}CPU: ${color grey}$cpu%
${color #5b6dad} ${cpugraph 16,140 000000 7f8ed3}
${color #5b6dad}RAM: $color$mem/$memmax
${color #5b6dad} ${membar 6,140}
${color #5b6dad}Swap:$color$swap/$swapmax
${color #5b6dad} ${swapbar 6,140}

${color #5b6dad}ETH0 Down: $color${downspeed eth0}${alignr} k/s 
${color #5b6dad} ${downspeedgraph eth0 16,140 000000 7f8ed3 150}
${color #5b6dad}ETH0 Up:   $color${upspeed eth0}${alignr} k/s 
${color #5b6dad} ${upspeedgraph eth0 16,140 000000 7f8ed3 18}

${color #5b6dad}File systems:
${color #5b6dad}/       $color${fs_free /}
${color #5b6dad} ${fs_bar 6,140 /}
${color #5b6dad}storage $color${fs_free /mnt/storage}
${color #5b6dad} ${fs_bar 6,140 /mnt/storage}

${color #5b6dad}Processes:$color $processes | $running_processes
${color} Cpu usage    CPU
${color #ddaa00} ${top name 1}${offset -50} ${top cpu 1}
${color #5b6dad} ${top name 2}${offset -50} ${top cpu 2}
${color #5b6dad} ${top name 3}${offset -50} ${top cpu 3}
${color #5b6dad} ${top name 4}${offset -50} ${top cpu 4}

${color} Mem usage    MEM
${color #ddaa00} ${top_mem name 1}${offset -50} ${top_mem mem 1}
${color #5b6dad} ${top_mem name 2}${offset -50} ${top_mem mem 2}
${color #5b6dad} ${top_mem name 3}${offset -50} ${top_mem mem 3}
${color #5b6dad} ${top_mem name 4}${offset -50} ${top_mem mem 4}

${color #5b6dad}# Connections   
$color In: ${tcp_portmon 1 32767 count}  Out: ${tcp_portmon 32768 61000 count}${alignr}

Last edited by drakosha (2007-11-14 14:32:28)

Offline

#2 2007-11-14 16:17:28

elasticdog
Member
From: Washington, USA
Registered: 2005-05-02
Posts: 995
Website

Re: conky configs and screenshots!

Really nice setup drakosha!  One of the nicest conky configs I think I've seen.  I may have to mess around with conky again to see if I can come up with something I like...

Offline

#3 2007-11-18 10:18:49

Fatih
Member
From: Ankara-Türkiye
Registered: 2005-12-17
Posts: 67
Website

Re: conky configs and screenshots!

Good topic, here is mine:

conkyli0.png


# ~/.conkyrc
#
double_buffer yes
background yes

use_xft yes
xftfont Bitstream Vera Sans Mono:size=10
xftalpha 0.8

update_interval 1.0
 
total_run_times 0

own_window yes
own_window_type override
own_window_transparent yes
own_window_colour hotpink
own_window_hints undecorated,below,skip_taskbar,sticky,skip_pager

minimum_size 80 5
draw_shades no
draw_outline no
draw_borders no
stippled_borders 0
border_margin 6
border_width 1
default_color slategrey 
default_shade_color lightgrey
default_outline_color white
alignment top_right
gap_x 20
gap_y 20
no_buffers yes
uppercase no

TEXT

${color slate grey}
${stippled_hr 2 1}
Mpd: ${mpd_status}
${mpd_smart}
${mpd_elapsed} / ${mpd_length} - Rnd:${mpd_random} Rpt:${mpd_repeat}
${mpd_bar}
${color slate grey}${stippled_hr 2 1}
${color}host  :${color white} ${nodename} 
${color}os    :${color white} ${sysname} ${kernel}
${color}hiz   :${color white} ${freq}Mhz ${color white}
$hr
${color}uptime:${color white} $uptime ${color white}
${color}pil   :${color white} ${battery BAT1}
$stippled_hr
${color}cpu   :${color white} $cpu% $cpubar
${color}ram   :${color white} $memperc% $membar
$stippled_hr
${color}home  : ${color white}${fs_free /home} ${fs_bar /home}
${color}yedek : ${color white}${fs_free /mnt/yedek} ${fs_bar /mnt/yedek} 
${color}fat32 : ${color white}${fs_free /mnt/fat32} ${fs_bar /mnt/fat32} 
$stippled_hr
${color}tarih : ${color white}${time %a,} ${time %B %e %G}
${color}saat  : ${color white}${time %H:%M:%S} ${color white}
$hr
${color}down:${color white} ${downspeed eth0} k/s ${color}  up:${color white} ${upspeed eth0} k/s
${color #888888}${downspeedgraph eth0 20,70 ff0000 0000ff}   ${color #888888}${upspeedgraph eth0 20,70 0000ff ff0000}
${exec cat ~/.gmail/.gmail_top}
${texeci 10800 python /home/fatih/.archnotify.py}

Offline

#4 2007-11-18 10:41:24

Fatih
Member
From: Ankara-Türkiye
Registered: 2005-12-17
Posts: 67
Website

Re: conky configs and screenshots!

@drakosha

For the python script i use this:

http://bbs.archlinux.org/viewtopic.php?id=37284

And the gmail script is from here:

http://conky.sourceforge.net/gmail.pl

It's written in Perl, but it depends on perl-io-socket-ssl and Mail::POP3Client. You can install the perl-io-socket-ssl via the PerlCPAN repo: http://wiki.archlinux.org/index.php/PerlCPAN_Repositor.

The mail stuff is installed via:

cpan -i Mail::POP3Client

Offline

#5 2007-11-18 21:20:16

[vEX]
Member
From: Sweden
Registered: 2006-11-23
Posts: 450

Re: conky configs and screenshots!

drakosha wrote:

I think it's a good idea to post conky config files with screenshots. If you are proud of it ;).

Proud? Not really, this is just a modified version of the config file I got from a friend back in the Torsmo days. I've been meaning to change it for a while but I haven't bothered so far.

conky_old.png

# ~/.conkyrc

background no
use_xft no
xftfont Bitstream Vera Sans Mono:size=8
xftalpha 0.8
update_interval 1.0
total_run_times 0
own_window no
own_window_type normal
own_window_transparent yes
own_window_colour hotpink
double_buffer yes
minimum_size 220 5
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes
stippled_borders 0
border_margin 10
border_width 1
default_color white
default_shade_color black
default_outline_color black
alignment bottom_left
gap_x 5
gap_y 29
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale no
use_spacer no

TEXT
$nodename - $sysname $kernel ($machine)
$stippled_hr
${color grey}Uptime:$color $uptime  ${color grey}Load:$color ${loadavg 1} ${loadavg 2} ${loadavg 3}
${color grey}CPU Usage:$color ${freq_dyn}MHz - $cpu% ${cpubar 6}
${color grey}RAM Usage:$color $mem/$memmax - $memperc% ${membar 6}
${color grey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar 6}
${color grey}Processes:$color $processes  ${color grey}Running:$color $running_processes
$color$stippled_hr
${color grey}Temperatures:
 ${color grey}CPU:$color ${hwmon 1 temp 2}°C ${color grey}Case:$color ${hwmon 1 temp 1}°C ${color grey}NB:$color ${hwmon 1 temp 3}°C
${color grey}Networking:
 Up:$color ${upspeed eth0} kB/s${color grey} - Down:$color ${downspeed eth0} kB/s
${color grey}File systems:
 / $color${fs_free /}/${fs_size /} ${fs_bar 6 /}
 ${color grey}/home $color${fs_free /home}/${fs_size /home} ${fs_bar 6 /home}
 ${color grey}/tmp $color${fs_free /tmp}/${fs_size /tmp} ${fs_bar 6 /tmp}

Last edited by [vEX] (2007-12-16 11:26:41)

PC: Antec P182B | Asus P8Z77-V PRO | Intel i5 3570k | 16GB DDR3 | GeForce 450GTS | 4TB HDD | Pioneer BDR-207D | Asus Xonar DX | Altec Lansing CS21 | Eizo EV2736W-BK | Arch Linux x86_64
HTPC: Antec NSK2480 | ASUS M3A78-EM (AMD 780G) | AMD Athlon X3 425 | 8GB DDR2 | GeForce G210 | 2TB HDD | Arch Linux x86_64
Server: Raspberry Pi (model B) | 512MB RAM | 750GB HDD | Arch Linux ARM

Offline

#6 2007-11-19 01:44:42

grte
Member
From: Canada
Registered: 2007-03-21
Posts: 42

Re: conky configs and screenshots!

http://i2.tinypic.com/6xjyr7t.png

# set to yes if you want Conky to be forked in the background
background yes

# Use Xft?
use_xft yes

# Xft font when Xft is enabled
xftfont Zekton:size=8

# Text alpha when using Xft
xftalpha 0.6 

# MPD host/port
mpd_host localhost
mpd_port 6600

# mail spool
mail_spool $MAIL

# Update interval in seconds
update_interval 1.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (requi#e78512 in nautilus)
own_window no

# Use double buffering (#e78512uces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 1280 5

# Draw shades?
draw_shades yes

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Draw borders around graphs
draw_graph_borders yes

# Stippled borders?
stippled_borders 8

# border margins
border_margin 1

# border width
border_width 1

# Text alignment
alignment bottom_left

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 4
gap_y 4

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support requires XFT
override_utf8_locale yes

# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer yes

# Allow each port monitor to track at most this many connections (if 0 or not set, default is 256)
max_port_monitor_connections 256

# Maximum number of special things, e.g. fonts, offsets, aligns, etc.
max_specials 512

# Maximum size of buffer for user text, i.e. below TEXT line.
max_user_text 16384

TEXT
${color white}[${color #2299cc} $uptime_short ${color white}${color white} - ${color #2299cc} $loadavg ${color white} - ${color #2299cc} $cpu% ${color white} - $color ${color #2299cc}$mem${color white} ${color white} - ${color #2299cc} ${downspeed eth0}k/s${color white}/${color #2299cc} ${upspeed eth0}k/s ${color white}] ${alignr}${color #2299cc}$mpd_smart ${color white}${color #2299cc} ${color white}Vol: ${color #2299cc}$mpd_vol ${color white} ]

Less is more.

Last edited by grte (2007-11-19 16:48:07)

Offline

#7 2007-11-19 04:22:39

AriciU
Member
Registered: 2007-08-31
Posts: 79

Re: conky configs and screenshots!

Here's mine

#avoid flicker

double_buffer yes



#own window to run simultanious 2 or more conkys

own_window  yes

own_window_transparent no

own_window_type normal

own_window_hints undecorate,sticky,skip_taskbar,skip_pager



#borders

draw_borders no

border_margin 1



#shades

draw_shades no



#position

gap_x 5

gap_y 4
alignment top_left


#behaviour

update_interval 1



#colour

default_color  8f8f8f

#default_shade_color 000000

own_window_colour 262626



#font

use_xft yes

xftfont bauhaus:pixelsize=10



#to prevent window from moving

use_spacer no

minimum_size 1670 25

#mpd

mpd_host localhost

mpd_port 6600



TEXT

${voffset -1} Kernel: ${color e0e0e0}${font}${kernel}${color} | CPU: ${color e0e0e0}${font}${cpu}% ${color} RAM: ${color e0e0e0}${font}${mem} ${color} | Intel(R) Core(TM)2 Duo CPU  E6750 @ ${color e0e0e0}${font}3656MHz   ${color} Core0: ${color e0e0e0}${font}${execi 1 sensors | grep "Core 0" | cut -c15-18}   ${color} Core1: ${color e0e0e0}${font}${execi 1 sensors | grep "Core 1" | cut -c15-18}   ${color}MB: ${color e0e0e0}${font}${execi 1 sensors | grep temp1 | cut -c15-18}   ${color}CPU Vcore: ${color e0e0e0}${font}${execi 1 sensors | grep in0 | cut -c13-16}v   ${color} RAM Vcore: ${color e0e0e0}${font}${execi 1 sensors | grep in1 | cut -c13-16}v ${color}   Nvidia GeForce 8800GTX: ${color e0e0e0}${font}${execi 1 nvidia-settings -q gpucoretemp  |grep '):' | cut -c 38-39} C ${color} | ${color} Up: ${color e0e0e0}${font}${uptime_short}${color}
${voffset 0}                                                                                                                                                                                                               Net: ${color e0e0e0}${font}${downspeed eth0} Kb/s ${color} ${totaldown eth0} Downloaded${color} | ${color} ${color e0e0e0}${upspeed eth0} Kb/s ${color} ${totalup eth0} Uploaded${color}  |  ${color}Root: ${color e0e0e0}${font}${fs_free /} ${color} Unix: ${color e0e0e0}${font}${fs_free /media/unix} ${color} Kane: ${color e0e0e0}${font}${fs_free /media/kane} ${color} ScT: ${color e0e0e0}${font}${fs_free /media/sct} ${color} XP: ${color e0e0e0}${font}${fs_free /media/ariciu} ${color}| ${color} Arch-pkg: ${color e0e0e0}${font}${execi 1200 perl ~/scripts/arch-updates/conky-updates.pl}${color}  |  ${color} Weather: ${color e0e0e0} ${execi 1800 weatherget -f ~/scripts/.conkyweatherrc --station-id="ROXX0003" --metric } ${color}

conkyyq9.th.png conky2xi8.th.jpg

Offline

#8 2007-11-19 07:16:31

mucknert
Member
From: Berlin // Germany
Registered: 2006-06-27
Posts: 510

Re: conky configs and screenshots!

That ...

# Conky sample configuration
#
# the list of variables has been removed from this file in favour
# of keeping the documentation more maintainable.
# Check http://conky.sf.net for an up-to-date-list.

# set to yes if you want Conky to be forked in the background
background yes

# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*

# Use Xft?
use_xft yes

# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=10

# Text alpha when using Xft
xftalpha 0.8

# Print everything to stdout?
# out_to_console no

# MPD host/port
mpd_host localhost
mpd_port 6600
# mpd_password tinker_bell

# Print everything to console?
# out_to_console no

# mail spool
mail_spool $MAIL

# Update interval in seconds
update_interval 5.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window no

# If own_window is yes, you may use type normal, desktop or override
own_window_type desktop

# Use pseudo transparency with own_window?
own_window_transparent yes

# If own_window_transparent is set to no, you can set the background colour here
own_window_colour hotpink

# If own_window is yes, these window manager hints may be used
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 280 5

# Draw shades?
draw_shades yes

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Draw borders around graphs
draw_graph_borders no

# Stippled borders?
stippled_borders 8

# border margins
border_margin 4

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color black

# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
#alignment none

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 5
gap_y 5

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale no

# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer no

# Allow each port monitor to track at most this many connections (if 0 or not set, default is 256)
#max_port_monitor_connections 256

# Maximum number of special things, e.g. fonts, offsets, aligns, etc.
#max_specials 512

# Maximum size of buffer for user text, i.e. below TEXT line.
#max_user_text 16384

# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument

# stuff after 'TEXT' will be formatted on screen
TEXT
$alignr${color white}$loadavg ${color red}:: ${color white}${time %a %d %B %Y} ${color red}-[${color white}${time %R}${color red}]-${color white} ${time %Z}
$alignr${color white}np${color red}: ${color white}$mpd_artist ${color red}- ${color white}$mpd_title

... gives that ...

conkyconfog3.png

... in the upper right corner. Minimal, isn't it?

Last edited by mucknert (2007-11-19 07:17:31)

Todays mistakes are tomorrows catastrophes.

Offline

#9 2007-11-19 08:25:07

Ashren
Member
From: Denmark
Registered: 2007-06-13
Posts: 1,229
Website

Re: conky configs and screenshots!

# Conky sample configuration
#
# the list of variables has been removed from this file in favour
# of keeping the documentation more maintainable.
# Check http://conky.sf.net for an up-to-date-list.

# set to yes if you want Conky to be forked in the background
background yes

# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*

# Use Xft?
use_xft yes

# Xft font when Xft is enabled
xftfont Delicious:bold:size=9

# Text alpha when using Xft
xftalpha 0.5

# Print everything to stdout?
# out_to_console no

# MPD host/port
# mpd_host localhost
# mpd_port 6600
# mpd_password tinker_bell

# Print everything to console?
# out_to_console no

# mail spool
# mail_spool $MAIL

# Update interval in seconds
update_interval 5.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window yes

# If own_window is yes, you may use type normal, desktop or override
own_window_type desktop

# Use pseudo transparency with own_window?
own_window_transparent no

# If own_window_transparent is set to no, you can set the background colour here
own_window_colour black

# If own_window is yes, these window manager hints may be used
#own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 1004 5

# Draw shades?
draw_shades no

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Draw borders around graphs
draw_graph_borders yes

# Stippled borders?
stippled_borders 8

# border margins
border_margin 4

# border width
border_width 1

# Default colors and also border colors
default_color 9ab8c2
default_shade_color white
default_outline_color white

#dexter_client no
#dexter_server no
# config file for libdexter (default search path: $HOME/.dexterrc; /etc/libdexter/dexter.conf)
#dexter_config

# Text alignment, other possible values are commented
alignment top_left
#alignment top_right
#alignment bottom_left
#alignment bottom_right
#alignment none

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 10
gap_y 10

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes

# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer yes

# Allow each port monitor to track at most this many connections (if 0 or not set, default is 256)
#max_port_monitor_connections 256

# Maximum number of special things, e.g. fonts, offsets, aligns, etc.
#max_specials 512

# Maximum size of buffer for user text, i.e. below TEXT line.
#max_user_text 16384

# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument

# stuff after 'TEXT' will be formatted on screen

TEXT
·: $alignc $nodename - $sysname $kernel on $machine | Uptime:$color $uptime | Ram:$color $mem/$memmax | Swap:$color $swap/$swapmax | Root: $color${fs_used /}/${fs_size /} - /home: $color${fs_used /home}/${fs_size /home} | Down:${downspeed eth0} k/s - Up:${upspeed eth0} k/s | CPU: $cpu% $alignr:·

equals

conkyashjp4.th.png

Use LVM2!

XMobar/XMonad - Click Workspaces :: Blog about Linux (mostly) :: Script for repetitive scrotting :: ISC DHCP Git Hooks

Offline

#10 2007-11-19 08:54:26

onearm
Member
From: Anywhere but here
Registered: 2006-07-06
Posts: 359
Website

Re: conky configs and screenshots!

conkypd9.png

# Conky sample configuration
#
# the list of variables has been removed from this file in favour
# of keeping the documentation more maintainable.
# Check http://conky.sf.net for an up-to-date-list.

# set to yes if you want Conky to be forked in the background
background no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*


# Use Xft?
use_xft yes

# Set conky on the bottom of all other applications
#on_bottom yes

# Xft font when Xft is enabled
xftfont Liberation Mono:size=10

# Text alpha when using Xft
xftalpha 0.8

# Window dimensions
maximum_width 1680
# Print everything to stdout?
# out_to_console no

# MPD host/port
# mpd_host localhost
# mpd_port 6600
# mpd_password tinker_bell

# Print everything to console?
# out_to_console no

# mail spool
mail_spool $MAIL

# Update interval in seconds
update_interval 2.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window yes

# Use pseudo transparency with own_window?
own_window_transparent yes

# Type of the window (it can be override, desktop or root)
own_window_type root 

# If own_window_transparent is set to no, you can set the background colour here
own_window_colour black

# Other window options
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 100 5

# Draw shades?
draw_shades no

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Draw borders around graph
draw_graph_borders yes

# Stippled borders?
stippled_borders 8

# border margins
border_margin 4

# border width
border_width 0

# Default colors and also border colors
default_color afa08f
#default_shade_color 434344
default_shade_color black
default_outline_color 434344

# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
#alignment none

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 5
gap_y 500

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale no


# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer no

#   mldonkey_hostname     Hostname for mldonkey stuff, defaults to localhost
#   mldonkey_port         Mldonkey port, 4001 default
#   mldonkey_login        Mldonkey login, default none
#   mldonkey_password     Mldonkey password, default none

# boinc (seti) dir
# seti_dir /opt/seti

# Allow for the creation of at least this number of port monitors (if 0 or not set, default is 16) 
#min_port_monitors 16

# Allow each port monitor to track at least this many connections (if 0 or not set, default is 256)
#min_port_monitor_connections 256

# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument

# stuff after 'TEXT' will be formatted on screen
#

TEXT
${alignr}${color}[ ${color #dc6a28}CPU1 ${alignr}${color #750701}${cpu cpu1}%${color}(${color #750701}${freq cpu1}Mhz${color}) ${color #dc6a28}CPU2 ${color #750701}${cpu cpu2}%${color}(${color #750701}${freq cpu2}Mhz${color}) ${color #dc6a28}RAM ${color #750701}$memperc%${color}(${color #750701}${memmax}${color}) ${color #dc6a28}I/O ${color #750701}$diskio_read${color}(${color #750701}$diskio_write${color}) ${color #dc6a28}UP ${color #750701}${upspeed eth0}k/s${color}(${color #750701}${totalup eth0}${color}) ${color #dc6a28}DOWN ${color #750701}${downspeed eth0}k/s${color}(${color #750701}${totaldown eth0}${color}) ]-[ ${color #dc6a28}Cpu ${color #750701}${platform w83627ehf.656 temp 1} ${color #dc6a28}Mobo ${color #750701}${platform w83627ehf.656 temp 3} ${color #dc6a28}Aux ${color #750701}${platform w83627ehf.656 temp 2} ${color #dc6a28}Gpu ${color #750701}${execi 10 ~/.conky/nvidiatemp} ${color #dc6a28}Sda ${color #750701}${execi 10 ~/.conky/hddtemp1} ${color #dc6a28}Sdb ${color #750701}${execi 10 ~/.conky/hddtemp2}${color} ]
${alignr}${color}[ ${color #dc6a28}WinXp ${color #750701}${fs_bar 7,40 /mnt/win_c} ${color #dc6a28}Dati ${color #750701}${fs_bar 7,40 /mnt/win_d} ${color #dc6a28}Fat ${color #750701}${fs_bar 7,40 /fat} ${color #dc6a28}Boot ${color #750701}${fs_bar 7,40 /boot} ${color #dc6a28}Arch ${color #750701}${fs_bar 7,40 /} ${color #dc6a28}Ubuntu ${color #750701}${fs_bar 7,40 /mnt/ubuntu} ${color #dc6a28}Documents ${color #750701}${fs_bar 7,40 /mnt/documents} ${if_mounted /media/private}${color #dc6a28}Private ${color #750701}${fs_bar 7,40 /media/private/}$endif ${color} ]
${if_running amarokapp}${alignr}${color}[ ${color #dc6a28}On Air Now${color}: ${color #750701}${execi 50 ~/.conky/amarok artist}${color}-${color #750701}${execi 50 ~/.conky/amarok title} ${color}(${color #750701}${execi 50 ~/.conky/amarok album}${color}) ]$endif

To get something done, a committee should consist of no more than three persons, two of them absent.
--
My Github

Offline

#11 2007-11-19 23:15:03

con
Member
Registered: 2006-05-11
Posts: 89
Website

Re: conky configs and screenshots!

conky.jpg

left

background        yes
update_interval        1.0
double_buffer        yes

use_xft            no
xftfont            Monospace:size=10
xftalpha        0.8

own_window        yes
own_window_transparent    yes
own_window_type        normal
own_window_hints    undecorated,below,sticky,skip_taskbar,skip_pager
#on_bottom        yes

minimum_size        300 50
draw_shades        no
draw_outline        yes
draw_borders        yes
draw_graph_borders    no
stippled_borders    0
border_margin        3
border_width        0

default_color        white
default_shade_color    black
default_outline_color    black

alignment        top_left
gap_x            343
#gap_y            34
gap_y            10

no_buffers        yes

TEXT
$nodename - $sysname $kernel on $machine ${time %H:%M}
${hr}
${color #F09000}File systems:
${color #F09000}Root: $color${fs_used /}/${fs_size /} ${fs_bar /}
${color #F09000}Home: $color${fs_used /home}/${fs_size /home} ${fs_bar /home}

middle

background        yes
update_interval    1.0
double_buffer        yes

use_xft            no
xftfont            Monospace:size=10
xftalpha            0.8

own_window        yes
own_window_transparent    yes
own_window_type        normal
own_window_hints    undecorated,below,sticky,skip_taskbar,skip_pager
#on_bottom        yes

minimum_size        300 42
draw_shades        no
draw_outline        yes
draw_borders        yes
draw_graph_borders    no
stippled_borders    0
border_margin        3
border_width        0

default_color        white
default_shade_color    black
default_outline_color    black

alignment        top_left
gap_x            648
#gap_y            34
gap_y            10

no_buffers        yes

TEXT
System
${hr}
${color #F09000}Memory${color #707070}:${color white} ${memperc}%    ${color #F09000}CPU${color #707070}:${color white} ${cpu}% ${freq}MHz
${color #F09000}P${color #707070}:${color white} ${running_processes}${color #707070}/${color white}${processes} 
${color #F09000}CPU 1:${color #FFFFFF} ${cpu cpu1}% ${cpubar}
${color #F09000}CPU 2:${color #FFFFFF} ${cpu cpu2}% ${cpubar}
${color #F09000}RAM Usage:$color $mem/$memmax - $memperc% $membar
${color #F09000}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar}

right

background        yes
update_interval        2.0
double_buffer        yes

use_xft            no
xftfont            Monospace:size=10
xftalpha        0.8

own_window        yes
own_window_transparent    yes
own_window_type        normal
own_window_hints    undecorated,below,sticky,skip_taskbar,skip_pager
#on_bottom        yes

minimum_size        300 50
draw_shades        no
draw_outline        yes
draw_borders        yes
draw_graph_borders    no
stippled_borders    0
border_margin        3
border_width        0

default_color        white
default_shade_color    black
default_outline_color    black

alignment        top_left
gap_x            953
#gap_y            34
gap_y            10

no_buffers        yes

TEXT
Networking
${hr}
${color #F09000}eth0${color #707070}:${color white} ${addr eth0}${alignr}${color #707070}${color white} ${color #707070}[${color white}${totaldown eth0}${color #707070}/${color white}${totalup eth0}${color #707070}]
Down:${color #8844ee} ${downspeed eth0} k/s${color lightgrey} ${offset 70}Up:${color #22ccff} ${upspeed eth0} k/s
${color black}${downspeedgraph eth0 32,150 ff0000 0000ff} $alignr${color white}${upspeedgraph eth0 32,150 0000ff ff0000}

charlie dont surf!

Offline

#12 2007-11-20 09:42:16

onearm
Member
From: Anywhere but here
Registered: 2006-07-06
Posts: 359
Website

Re: conky configs and screenshots!

drakosha wrote:

onearm - your image link is wrong...

It's not wrong, it's the whole image, not simply the thumb.

Image in a thumbnail is this (ugly thumb though):

conkybp1.th.png

To get something done, a committee should consist of no more than three persons, two of them absent.
--
My Github

Offline

#13 2007-11-20 21:23:49

chilebiker
Member
From: Zurich, Switzerland
Registered: 2006-07-18
Posts: 161

Re: conky configs and screenshots!

conky.png

background yes
cpu_avg_samples 5
net_avg_samples 5
out_to_console no
font 7x13
own_window_transparent no
own_window_colour hotpink
xftalpha 1.0
update_interval 2
own_window no
double_buffer yes
minimum_size 5 5
draw_shades yes
draw_outline no
draw_borders yes
stippled_borders 0
border_margin 10
border_width 2
default_color white
default_shade_color black
default_outline_color white
alignment top_left
gap_x 20
gap_y 470
use_spacer yes
no_buffers yes
uppercase no

# stuff after 'TEXT' will be formatted on screen
TEXT
${color #CCCCCC}${time %A, %d %B %Y} ${alignr}${time %T}

${color #ffccaa}SYSTEM
${color white}${hr 1}
  ${color #888888}Kernel: ${color #CCCCCC}$kernel ${color #888888}${alignr}Uptime: ${color #CCCCCC}$uptime
  ${color #888888}CPU   : ${color #CCCCCC}$freq_g GHz   $cpu%  ${alignr}${i2c temp 2} C
  ${color #888888}        ${cpugraph 15,210 ff0000 ff00ff}
  ${color #888888}RAM   : ${color #CCCCCC}$memmax     $memperc%  ${membar 6}
  ${color #888888}Swap  : ${color #CCCCCC}$swapmax     $swapperc%  ${swapbar 6}

${color #ffccaa}DISK
${color white}${hr 1}
  ${color #888888}/     : ${color #CCCCCC}${fs_size /}    ${fs_free_perc /} %  ${fs_bar 6 /}
  ${color #888888}/home : ${color #CCCCCC}${fs_size /home}    ${fs_free_perc /home} %  ${fs_bar 6 /home}
  ${color #888888}/data : ${color #CCCCCC}${fs_size /mnt/data}   ${fs_free_perc /mnt/data} %  ${fs_bar 6 /mnt/data}
  ${color #888888}/sda3 : ${color #CCCCCC}${fs_size /mnt/sda3}    ${fs_free_perc /mnt/sda3} %  ${fs_bar 6 /mnt/sda3}
  ${color #888888}/sda8 : ${color #CCCCCC}${fs_size /mnt/sda8}   ${fs_free_perc /mnt/sda8} %  ${fs_bar 6 /mnt/sda8}
  ${color #888888}/sdb1 : ${color #CCCCCC}${fs_size /mnt/sdb1}   ${fs_free_perc /mnt/sdb1} %  ${fs_bar 6 /mnt/sdb1}
  ${color #888888}/sdb2 : ${color #CCCCCC}${fs_size /mnt/sdb2}   ${fs_free_perc /mnt/sdb2} %  ${fs_bar 6 /mnt/sdb2}
  ${color #888888}/sdb3 : ${color #CCCCCC}${fs_size /mnt/sdb3}   ${fs_free_perc /mnt/sdb3} %  ${fs_bar 6 /mnt/sdb3}
  ${color #888888}/sdb5 : ${color #CCCCCC}${fs_size /mnt/sdb5}  ${fs_free_perc /mnt/sdb5} %  ${fs_bar 6 /mnt/sdb5}
  ${color #888888}/sdc1 : ${color #CCCCCC}${fs_size /mnt/sdc1}     ${fs_free_perc /mnt/sdc1} %  ${fs_bar 6 /mnt/sdc1}

${color #ffccaa}PROCESSES
${color white}${hr 1}
  ${color #888888}Processes: ${color #CCCCCC}$processes  ${color #888888}Running: ${color #CCCCCC}$running_processes

  ${color #888888}Name             PID     CPU%   MEM%
  ${color #CCCCCC}${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
  ${color #CCCCCC}${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
  ${color #CCCCCC}${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}

  ${color #CCCCCC}${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
  ${color #CCCCCC}${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
  ${color #CCCCCC}${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}

${color #ffccaa}NETWORK    
${color white}${hr 1}
  ${color #888888}Down : ${color #CCCCCC}${downspeed eth0}kb/s${color #888888}${alignr}Total : ${color #CCCCCC}${totaldown eth0}
  ${color #888888}Up   : ${color #CCCCCC}${upspeed eth0}kb/s${color #888888}${alignr}Total : ${color #CCCCCC}${totalup eth0}

Don't panic!

Offline

#14 2007-11-20 22:14:34

spookshow
Member
From: abbotsford, bc
Registered: 2006-11-15
Posts: 95
Website

Re: conky configs and screenshots!

this thread is perfect, i'm just about to redo my very basic conky that i have now. thanks!

Offline

#15 2007-11-21 14:06:42

elliott
Member
Registered: 2006-03-07
Posts: 296

Re: conky configs and screenshots!

I liked chilebiker's so much that I stole it, here it is modified to suit my system. I'm probably going to do some more minor tweaking, but I am pretty happy with it.

200711210859121024x768sdu3.png

background yes
cpu_avg_samples 5
net_avg_samples 5
out_to_console no
font 7x13
own_window_transparent no
own_window_colour hotpink
xftalpha 1.0
update_interval 2
own_window no
double_buffer yes
minimum_size 5 5
draw_shades yes
draw_outline no
draw_borders yes
stippled_borders 0
border_margin 10
border_width 2
default_color white
default_shade_color black
default_outline_color white
alignment top_left
gap_x 20
gap_y 20
use_spacer yes
no_buffers yes
uppercase no
mpd_host 192.168.1.15
mpd_port 6600
# stuff after 'TEXT' will be formatted on screen
TEXT
${color #CCCCCC}${time %A, %d %B %Y} ${alignr}${time %T}

${color #ffccaa}SYSTEM
${color white}${hr 1}
  ${color #888888}Kernel: ${color #CCCCCC}$kernel ${color #888888}${alignr}Uptime: ${color #CCCCCC}$uptime
  ${color #888888}CPU   : ${color #CCCCCC}$freq MHz   $cpu%  ${alignr}${acpitemp} C
  ${color #888888}        ${cpugraph 15,210 ff0000 ff00ff}
  ${color #888888}RAM   : ${color #CCCCCC}$memmax     $memperc%  ${membar 6}
  ${color #888888}Swap  : ${color #CCCCCC}$swapmax     $swapperc%  ${swapbar 6}

${color #ffccaa}POWER
${color white}${hr 1}
  ${color #888888}AC Adapter: ${color #CCCCCC}$acpiacadapter
  ${color #888888}Battery   : ${color #CCCCCC}$battery $battery_time

${color #ffccaa}DISK
${color white}${hr 1}
  ${color #888888}/     : ${color #CCCCCC}${fs_size /}    ${fs_used_perc /} % ${alignr}${fs_bar 6,100 /}
  ${color #888888}/home : ${color #CCCCCC}${fs_size /home}    ${fs_used_perc /home} % ${alignr}${fs_bar 6,100 /home}

${color #ffccaa}PROCESSES
${color white}${hr 1}
  ${color #888888}Processes: ${color #CCCCCC}$processes  ${color #888888}Running: ${color #CCCCCC}$running_processes

  ${color #888888}Name             PID     CPU%   MEM%
  ${color #CCCCCC}${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
  ${color #CCCCCC}${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
  ${color #CCCCCC}${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}

  ${color #CCCCCC}${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
  ${color #CCCCCC}${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
  ${color #CCCCCC}${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}

${color #ffccaa}NETWORK
${color white}${hr 1}
  ${color #888888}Down : ${color #CCCCCC}${downspeed wlan0}kb/s${color #888888}${alignr}Total : {color #CCCCCC}${totaldown wlan0}
  ${color #888888}Up   : ${color #CCCCCC}${upspeed wlan0}kb/s${color #888888}${alignr}Total : ${color #CCCCCC}${totalup wlan0}

${color #ffccaa}NOW PLAYING
${color white}${hr 1}
 ${color #888888}Artist: ${color #CCCCCC}$mpd_artist
 ${color #888888}Title : ${color #CCCCCC}${mpd_title 30}
 ${color #CCCCCC}$mpd_bar
 ${color #CCCCCC}$mpd_elapsed/$mpd_length ${alignc}$mpd_status ${alignr}$mpd_percent%

Last edited by elliott (2007-11-21 14:20:43)

Offline

#16 2007-11-21 18:19:15

MrWeatherbee
Member
Registered: 2007-08-01
Posts: 277

Re: conky configs and screenshots!

Conky ${if_running gmpc} = False:

conkynompdsmvo7.th.png

Conky ${if_running gmpc} = True:

conkympdsmis3.th.png

alignment top_right
background yes                          # fork process

color0 1C1C1C                           # section header

double_buffer yes                       # may reduce flicker
default_color BBBBBB
draw_outline no                         # draw text outline
draw_shades no                          # draw shades

gap_x 10                                # right (x) / top (y) screen-gaps
gap_y 45

own_window yes                          # required with nautilus
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

update_interval 3.0                     # update interval in seconds
use_spacer yes                          # prevent shifting when output changes

use_xft yes                             # font settings
xftalpha 0.8
xftfont andale mono:size=8
uppercase no

# Note: cpugraph, downspeedgraph, & upspeedgraph colors
# Gradient1: ffffff - white
# Gradient2: 00A2FF - bright / light blue

TEXT                                    # the following creates onscreen format

${color0}${font openlogos:bold:size=20}B$font $nodename > ${uptime} ${hr 1}$color
$sysname $kernel / $machine
${if_running gmpc}
${color0}MPD - Status: <${mpd_status}> PCM Vol: ${mpd_vol}% ${hr 1}$color 
Artist  : ${mpd_artist}
Album   : ${mpd_album}
Track   : ${mpd_track}
Title   : ${mpd_title}
${mpd_bar 15}
            Progress: ${mpd_percent}%  |  ${mpd_elapsed} / ${mpd_length}
${endif}
${color0}CPU  > ${freq}MHz ${hr 1}$color
Avg. Load Over 1, 5, 15 minutes: ${loadavg}
Current Load: $cpu% $cpubar
${cpugraph 15,310 ffffff 00A2FF}

${color0}PROCESSES  > ${processes} / ${running_processes} ${hr 1}$color
NAME                     PID       CPU%      MEM%
${top name 1}         ${top pid 1}   ${top cpu 1}    ${top mem 1}
${top name 2}         ${top pid 2}   ${top cpu 2}    ${top mem 2}
${top name 3}         ${top pid 3}   ${top cpu 3}    ${top mem 3}
${top name 4}         ${top pid 4}   ${top cpu 4}    ${top mem 4}

${color0}MEMORY / SWAP > $memmax / $swapmax ${hr 1}$color
RAM :  $mem / $memperc%${alignr}${membar 6,130}
Swap:  $swap / $swapperc%${alignr}${swapbar 6,130}
I/O :  ${diskio}${alignr}${diskiograph 6,130}

${color0}DISK > /dev/sdc ${hr 1}$color
/      (    sdc09):  ${fs_free /} / ${fs_free_perc /}%  ${fs_bar 6 /}
/home  (    sdc10):  ${fs_free /home} / ${fs_free_perc /home}%  ${fs_bar 6 /home}
/usr   (vg02-lv01):  ${fs_free /usr} / ${fs_free_perc /usr}%  ${fs_bar 6 /usr}
/opt   (vg02-lv02):  ${fs_free /opt} / ${fs_free_perc /opt}%  ${fs_bar 6 /opt}
/var   (vg02-lv03):  ${fs_free /var} / ${fs_free_perc /var}%  ${fs_bar 6 /var}
/store (    sdc14): ${fs_free /home/user/zzStore} / ${fs_free_perc /home/user/zzStore}%  ${fs_bar 6 /home/user/zzStore}

${color0}NETWORK > ${addr eth0} ${hr 1}$color
${downspeedgraph eth0 15,150 ffffff 00A2FF}  ${upspeedgraph eth0 15,150 ffffff 00A2FF}
Down / Up Speed:  ${downspeed eth0} k/s  /  ${upspeed eth0} k/s
Down / Up Bytes:  ${totaldown eth0}  /  ${totalup eth0}
Inbound / Outbound / Total: ${tcp_portmon 1 32767 count}  /  ${tcp_portmon 32768 61000 count}  /  ${tcp_portmon 1 65535 count}

${color0}SENSORS ${hr 1}$color
CPU Temp:   ${platform it87.3328 temp 1} C           CPU Fan :   ${platform it87.3328 fan 1} RPM
M/B Temp:   ${platform it87.3328 temp 2} C           M/B Fan :   ${platform it87.3328 fan 3} RPM

${execi 60 tail -1 ~/.zzlog/smart/sda.log}
${execi 60 tail -1 ~/.zzlog/smart/sdb.log}
${execi 60 tail -1 ~/.zzlog/smart/sdc.log}

${execi 30 sensors |grep VCore |cut -c1-18}
${execi 30 sensors |grep Graphics |cut -c1-18}

For the script I wrote to toggle alternate Conky configs, see here if interested:
http://bbs.archlinux.org/viewtopic.php? … 82#p276282

Offline

#17 2007-11-21 22:47:38

chilebiker
Member
From: Zurich, Switzerland
Registered: 2006-07-18
Posts: 161

Re: conky configs and screenshots!

@elliott
That's what this thread is for! :-)

Don't panic!

Offline

#18 2007-12-02 03:55:53

platinummonkey
Member
Registered: 2007-12-02
Posts: 18
Website

Re: conky configs and screenshots!

A work in progress, but all right aligned! (a real pain in the ...)

Conky Screenshot

Download everything here.

# Platinummonkey's Conky configuration
# Built on Arch Linux i686 system
#
# To display everything here you will need the following scripts:
# r_box2.sh - created by me
# r_box_bar.sh - created by me
# countdown.rb - unknown creator, modified by me
# compsize.sh - unknown command author, script created by me
# fortune - in the repo's
# arch_update.py - created by Michal Orlik (Put shell script with command 'pacman -Sy' into /etc/cron.hourly/ to make this work!)
# 
# Other necessary tools for the above scripts to work:
# awk/gawk/etc... (must be properly linked to 'awk' unless you want to go through all the scripts and change it yourself ;))
# bc (bash calculator) availiable in the repo's (requires supplied extensions.bc)
# ruby (and rubygems) - repo's
# python - repo's
# patience - sold separately
#
# The following fonts are required for the logos to be displayed: (All of these are TTF fonts!)
# openlogos: http://icompile.info/logos.html
# illustrate: http://icompile.info/logos.html
# Bitstream Vera Sans Mono: repo's


# set to yes if you want Conky to be forked in the background
background no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*


# Use Xft?
use_xft yes

# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=8

# Text alpha when using Xft
xftalpha 0.8

# Print everything to stdout?
out_to_console no

# MPD host/port
# mpd_host localhost
# mpd_port 6600
# mpd_password vista_killer

# Print everything to console?
out_to_console no

# mail spool
#mail_spool $MAIL

# Update interval in seconds
update_interval 5.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window yes

# If own_window is yes, you may use type normal, desktop or override
own_window_type override

# Use pseudo transparency with own_window?
own_window_transparent yes

# If own_window_transparent is set to no, you can set the background colour here
own_window_colour grey

# If own_window is yes, these window manager hints may be used
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 280 5
maximum_width 348

# Draw shades?
draw_shades no

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Draw borders around graphs
draw_graph_borders yes

# Stippled borders?
stippled_borders 10

# border margins
border_margin 4

# border width
border_width 1

# Default colors and also border colors
default_color lightgrey
default_shade_color grey
default_outline_color grey

# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
#alignment none

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 12
gap_y 35

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale no


# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer no

#   mldonkey_hostname     Hostname for mldonkey stuff, defaults to localhost
#   mldonkey_port         Mldonkey port, 4001 default
#   mldonkey_login        Mldonkey login, default none
#   mldonkey_password     Mldonkey password, default none

# boinc (seti) dir
# seti_dir /dir

# Allow for the creation of at least this number of port monitors (if 0 or not set, default is 16) 
#min_port_monitors 16

# Allow each port monitor to track at least this many connections (if 0 or not set, default is 256)
#min_port_monitor_connections 256

# none, xmms, bmp, audacious, infopipe (default is none)
#xmms_player none

# stuff after 'TEXT' will be formatted on screen

TEXT
${alignr}${font openlogos:bold:size=15}B${font}[$nodename - $sysname $kernel on $machine]   
${alignr}|  
${alignr}system--+  
${alignr}|  |  
${alignr}$uptime :Uptime--+  |  
${alignr}$loadavg :Load--+  |  
${alignr}$cpu% :CPU Usage--+  |  
${alignr}${cpubar 5,200}  |  |  
${alignr}:Processes--+  |  
${alignr}|    |  
${alignr}$processes :Total--+    |  
${alignr}$running_processes :Running--+    |  
${alignr}|  
${alignr}resources--+  
${alignr}|  |  
${alignr}$diskio_read :Read--+  |  
${alignr}$diskio_write :Write--+  |  
${alignr}|  |  
${alignr}$mem/$memmax - $memperc% used :RAM--+  |  
${alignr}${membar 5,200}  |  |  
${alignr}$swap/$swapmax - $swapperc% used :Swap--+  |  
${alignr}${swapbar 5,200}  |  |  
${alignr}${fs_used /}/${fs_size /} ${fs_used_perc /}% used :root--+  |  
${alignr}${fs_bar 5,200 /}  |  |  
${alignr}${fs_used /home}/${fs_size /home} ${fs_used_perc /home}% used :home--+  |  
${alignr}${fs_bar 5,200 /home}  |  |  
${if_mounted /media/disk-1}${alignr}${fs_used /media/disk-1}/${fs_size /media/disk-1} ${fs_used_perc /media/disk-1}% used :USB Drive--+  |  
${alignr}${fs_bar 5,200 /media/disk-1}  |  |  
${alignr}$else${alignr}|  $endif
${alignr}net--+  
${alignr}|  |  
${alignr}${downspeed eth0} k/s :down--+  |  
${alignr}${downspeedgraph eth0 8,200 eeeeee cccccc}  |  |  
${alignr}${upspeed eth0} k/s :up--+  |  
${alignr}${upspeedgraph eth0 8,200 eeeeee cccccc}  |  |  
${alignr}|  
${alignr}${execi 10 ~/dev/r_box2.sh}
${alignc}${execbar ~/dev/r_box_bar.sh}
${alignr}|  
${alignr}${execi 3600 ~/dev/compsize.sh}
${alignr}${execi 7200 ~/dev/countdown.rb | awk '{printf "%58s\n", $0}'}
${alignr}|  
${alignr}:FORTUNE--+  
${alignr}${execi 3600 fortune -as | fold -w 58 |  awk '{printf "%58s\n", $0}'}
${alignr}|  
${alignr}:Arch Updates--+  
${hr}
${texeci 1800 python ~/dev/arch_update.py | awk '{printf "%58s\n", $0}'}
${alignr}
${alignc}${font openlogos:size=25}${if_running firefox-bin}P${endif}${if_running soffice.bin}f${endif}${font illustrate:size=20}${if_running rhythmbox}4${endif}${if_running vlc}7${endif}${if_running Dreamweaver.exe}P${endif}${if_running Fireworks.exe}Q${endif}${if_running Flash.exe}R${endif}${font openlogos:size=25}t${font}

Last edited by platinummonkey (2007-12-02 04:22:39)

Offline

#19 2007-12-02 18:33:32

darkarchon
Member
From: Israel
Registered: 2007-02-28
Posts: 44

Re: conky configs and screenshots!

Well, i shamelessly stole drakosha's conkyrc, tweaked it a bit, and here's the result:

8dw0f2h.png

background no
use_xft yes
xftfont Bitstream Vera Sans Mono:size=8
xftalpha 0.8
update_interval 5
total_run_times 0
own_window yes
own_window_type override
own_window_transparent yes
own_window_colour hotpink
own_window_hints undecorated,below,skip_taskbar,sticky,skip_pager
double_buffer yes
minimum_size 280 5
draw_shades yes
draw_outline no
draw_graph_borders yes
stippled_borders 8
border_margin 4
border_width 4
maximum_width 155
default_color darkgrey
default_shade_color black
default_outline_color black
alignment bottom_right
gap_x -5
gap_y 12
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale no
use_spacer no
color0 5b6dad

TEXT
$color0}${alignc}${nodename} -- ${uptime_short}

$color0}CPU: ${color grey}$cpu%   $color0}[$color${exec sensors | grep 'Core 0' | cut -c15-16}C$color0}]  ${freq_dyn}Mhz
$color0} ${cpugraph 16,140 000000 7f8ed3}
$color0}RAM:  $color$mem/$memmax
$color0} ${membar 6,140}
$color0}Swap: $color$swap/$swapmax
$color0} ${swapbar 6,140}

$color0}ETH0 Down: $color${downspeed eth0}${alignc} k/s 
$color0} ${downspeedgraph eth0 16,140 000000 7f8ed3 190}
$color0}ETH0 Up:   $color${upspeed eth0}${alignc} k/s 
$color0} ${upspeedgraph eth0 16,140 000000 7f8ed3 16}
$color0}File systems:
$color0}/       $color${fs_free /}
$color0} ${fs_bar 6,140 /}
$color0}HDD Usage:   [Temp: $color${exec nc localhost 7634 | cut -c27-28;}C$color0}]
$color0} $color${diskiograph 16,140 000000 7f8ed3 90000}

$color0}Processes:$color $processes | $running_processes
${color} CPU Usage         CPU
${color #ddaa00} ${top name 1}${offset -10} ${top cpu 1}
$color0} ${top name 2}${offset -10} ${top cpu 2}
$color0} ${top name 3}${offset -10} ${top cpu 3}
$color0} ${top name 4}${offset -10} ${top cpu 4}

${color} MEM Usage         MEM
${color #ddaa00} ${top_mem name 1}${offset -10} ${top_mem mem 1}
$color0} ${top_mem name 2}${offset -10} ${top_mem mem 2}
$color0} ${top_mem name 3}${offset -10} ${top_mem mem 3}
$color0} ${top_mem name 4}${offset -10} ${top_mem mem 4}

$color0}# of Connections   
$color In: ${tcp_portmon 1 32767 count}  Out: ${tcp_portmon 32768 61000 count}${alignr}

Last edited by darkarchon (2007-12-02 19:21:37)

Offline

#20 2007-12-06 02:20:09

AlmaMater
Member
Registered: 2007-02-28
Posts: 97

Re: conky configs and screenshots!

#avoid flicker
double_buffer yes

#own window to run simultanious 2 or more conkys
own_window yes
own_window_transparent no
own_window_type normal
own_window_hints undecorate,sticky,skip_taskbar,skip_pager 

#borders
draw_borders no
border_margin 1

#shades
draw_shades no

#position
gap_x 0
gap_y 0
alignment top_center

#behaviour
update_interval 1

#colour
default_color  ffffff

#default_shade_color 0000003d352a
own_window_colour 000000

#font
use_xft yes
xftfont AvantGarde Md BT:pixelsize=13

TEXT
${alignc}${color}Kernel: ${color D7D3C5}$kernel  |  ${color}Processes: ${color D7D3C5}$processes  ${color}Running: ${color D7D3C5}$running_processes  |  ${color}Core0: ${color D7D3C5}${cpu cpu1}% - ${color}Temp: ${color D7D3C5}${hwmon 0 temp 1}°C    ${color}Core1: ${color D7D3C5}${cpu cpu2}% - ${color}Temp: ${color D7D3C5}${hwmon 0 temp 3}°C  |  ${color}Mem: ${color D7D3C5}$memperc%  |  ${color}Root: ${color D7D3C5}${font}${fs_free /}  / ${fs_size /}  |  ${color}Home: ${color D7D3C5}${fs_free /home}  / ${fs_size /home}  |  ${color}IP: ${color D7D3C5}${addr eth0}  |  ${color}Down: ${color D7D3C5}${downspeedf eth0}k/s  -  ${color}Up: ${color D7D3C5}${upspeedf eth0}k/s

screenconkypf1.th.jpg

smile

Offline

#21 2007-12-13 07:03:51

platinummonkey
Member
Registered: 2007-12-02
Posts: 18
Website

Re: conky configs and screenshots!

An update from before.  Still a work in progress, but all right aligned! cool

myconky3_thumb.png

Download everything here.

my .conkrc:

# Platinummonkey's Conky configuration
# Built on Arch Linux i686 system
#
# To display everything here you will need the following scripts:
# r_box.sh - created by me
# r_box_bar.sh - created by me
# countdown2.rb - unknown creator, modified by me
# compsize2.sh - unknown command author, script created by me
# fortune - in the repo's
# arch_update.py - created by Michal Orlik (Put shell script with command 'pacman -Sy' into /etc/cron.hourly/ to make this work!)
# 
# Other necessary tools for the above scripts to work:
# awk/gawk/etc... (must be properly linked to 'awk' unless you want to go through all the scripts and change it yourself ;))
# bc (bash calculator) availiable in the repo's (plus provided extensions)
# ruby (and rubygems) - repo's
# python - repo's
# patience - sold separately
#
# The following fonts are required for the logos to be displayed: (All of these are TTF fonts!)
# openlogos: http://icompile.info/logos.html
# illustrate: http://icompile.info/logos.html
# DejaVu Sans Mono: repo's


# set to yes if you want Conky to be forked in the background
background no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*


# Use Xft?
use_xft yes

# Xft font when Xft is enabled
xftfont DejaVu Sans Mono:pixelsize=10

# Text alpha when using Xft
xftalpha 1

# Print everything to stdout?
out_to_console no

# MPD host/port
# mpd_host localhost
# mpd_port 6600
# mpd_password vista_killer

# Print everything to console?
out_to_console no

# mail spool
#mail_spool $MAIL

# Update interval in seconds
update_interval 5.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Create own window instead of using desktop (required in nautilus)
own_window yes

# If own_window is yes, you may use type normal, desktop or override
own_window_type override

# Use pseudo transparency with own_window?
own_window_transparent yes

# If own_window_transparent is set to no, you can set the background colour here
own_window_colour grey

# If own_window is yes, these window manager hints may be used
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 280 5
maximum_width 348

# Max buffers for conky!
# Default - max_specials 512
# Default - max_user_text 16384 #bytes
# Default - text_buffer_size 1280 #bytes
max_specials 1024
max_user_text 65536
text_buffer_size 10240



# Draw shades?
draw_shades no

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Draw borders around graphs
draw_graph_borders yes

# Stippled borders?
stippled_borders 10

# border margins
border_margin 4

# border width
border_width 1

# Default colors and also border colors
default_color lightgrey
default_shade_color grey
default_outline_color grey

# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
#alignment none

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 12
gap_y 35

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale yes


# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer no

#   mldonkey_hostname     Hostname for mldonkey stuff, defaults to localhost
#   mldonkey_port         Mldonkey port, 4001 default
#   mldonkey_login        Mldonkey login, default none
#   mldonkey_password     Mldonkey password, default none

# boinc (seti) dir
# seti_dir /dir

# Allow for the creation of at least this number of port monitors (if 0 or not set, default is 16) 
#min_port_monitors 16

# Allow each port monitor to track at least this many connections (if 0 or not set, default is 256)
#min_port_monitor_connections 256

# none, xmms, bmp, audacious, infopipe (default is none)
#xmms_player none

# stuff after 'TEXT' will be formatted on screen
#${alignr}${hwmon cpu 0} :CPU Temp──┤  │  

TEXT
${alignr}${font openlogos:bold:size=15}B${font}[$nodename ─ $sysname $kernel on $machine]   
${alignr}│  
${alignr}system──┤  
${alignr}│  │  
${alignr}$uptime :Uptime──┤  │  
${alignr}$loadavg :Load──┤  │  
${alignr}$cpu% :CPU Usage──┤  │  
${alignr}${cpubar 5,200}  │  │  
${alignr}${acpitemp}.0°C :CPU Temp 1──┤  │  
${alignr}${hwmon temp 1}°C :Temp 1──┤  │  
${alignr}${hwmon temp 2}°C :Temp 2──┤  │  
${alignr}${hwmon temp 3}°C :Temp 3──┤  │  
${alignr}${hwmon fan 1} rpm :Fan 1──┤  │  
${alignr}${exec sensors | awk '/VCore 1/ {print $3}'} :VCore──┤  │  
${alignr}${exec sensors | awk '/cpu0_vid/ {print $2}'} :GPU voltage──┤  │  
${alignr}:Processes──┘  │  
${alignr}│     │  
${alignr}$processes :Total──┤     │  
${alignr}$running_processes :Running──┘     │  
${alignr}│  
${alignr}resources──┤  
${alignr}│  │  
${alignr}$diskio_read :Read──┤  │  
${alignr}$diskio_write :Write──┤  │  
${alignr}│  │  
${alignr}$mem/$memmax - $memperc% used :RAM──┤  │  
${alignr}${membar 5,200}  │  │  
${alignr}$swap/$swapmax - $swapperc% used :Swap──┤  │  
${alignr}${swapbar 5,200}  │  │  
${alignr}${fs_used /}/${fs_size /} ${fs_used_perc /}% used :root──┤  │  
${alignr}${fs_bar 5,200 /}  │  │  
${alignr}${fs_used /home}/${fs_size /home} ${fs_used_perc /home}% used :home──┤  │  
${alignr}${fs_bar 5,200 /home}  │  │  
${if_mounted /media/disk-1}${alignr}${fs_used /media/disk-1}/${fs_size /media/disk-1} ${fs_used_perc /media/disk-1}% used :USB Drive──┤  │  
${alignr}${fs_bar 5,200 /media/disk-1}  │  │  
${alignr}$else${alignr}│  $endif
${alignr}net──┤  
${alignr}│  │  
${alignr}${downspeed eth0} k/s :down──┤  │  
${alignr}${downspeedgraph eth0 8,200 eeeeee cccccc}  │  │  
${alignr}${upspeed eth0} k/s :up──┤  │  
${alignr}${upspeedgraph eth0 8,200 eeeeee cccccc}  │  │  
${alignr}│  
${alignr}${execi 10 ~/dev/r_box.sh}
${if_running rhythmbox}${alignc}${execbar ~/dev/r_box_bar.sh}${else}${alignr}│  ${endif}
${alignr}│  
${alignr}${execi 3600 ~/dev/compsize2.sh}
${alignr}${execi 7200 ~/dev/countdown2.rb | awk '{printf "%64s\n", $0}'}
${alignr}│  
${alignr}:FORTUNE──┤  
${alignr}${execi 3600 fortune -as | fold -w 58 |  awk '{printf "%58s\n", $0}'}
${alignr}│  
${alignr}:Arch Updates──┘  
${hr}
${if_running pacman}${alignr}Update in progress...${else}${texeci 1800 python ~/dev/arch_update.py | awk '{printf "%58s\n", $0}'}${endif}
${alignr}
${alignc}${font openlogos:size=25}${if_running firefox-bin}P${endif}${if_running soffice.bin}f${endif}${font "Illustrate IT":size=20}${if_running rhythmbox}4${endif}${if_running vlc}7${endif}${if_running Dreamweaver.exe}P${endif}${if_running Fireworks.exe}Q${endif}${if_running Flash.exe}R${endif}${font openlogos:size=25}t${font}

Edit: very minor update. (Place if statement on arch update. That way, when I update, I wont get that nasty error. Instead it will show "update in progress..." smile)

Last edited by platinummonkey (2007-12-14 23:16:18)

Offline

#22 2007-12-14 09:46:07

Leigh
Member
From: USA
Registered: 2004-06-25
Posts: 533

Re: conky configs and screenshots!

platinummonkey, I like it very much! Thanks for sharing smile

-- archlinux 是一个极好的 linux。

Offline

#23 2007-12-16 03:13:48

synorgy
Member
From: $HOME
Registered: 2005-07-11
Posts: 272
Website

Re: conky configs and screenshots!

Extremely simple, one color config 30px from the top left corner
conky.jpg.xs.jpg

background no
use_xft yes
xftfont Bitstream Vera Sans:size=7

xftalpha 0.8

mpd_host localhost
mpd_port 6600
# mpd_password tinker_bell

update_interval 1
total_run_times 0
own_window yes
own_window_type desktop
own_window_transparent yes
#own_window_colour hotpink
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

double_buffer yes
minimum_size 280 5

draw_shades no

draw_outline no

draw_borders no

draw_graph_borders yes

#stippled_borders 8

border_margin 4

border_width 1

default_color white
default_shade_color black
default_outline_color black

# Text alignment, other possible values are commented
alignment top_left
#alignment top_right
#alignment bottom_left
#alignment bottom_right
#alignment none

gap_x 12
gap_y 30

no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
override_utf8_locale no
use_spacer no
# stuff after 'TEXT' will be formatted on screen

TEXT
Sys:         $kernel
        Uptime: $uptime 
        CPU: $cpu%
        RAM: $memperc% ($mem / $memmax)

Net:         Down:${downspeed eth0} k/s
        Up: ${upspeed eth0} k/s
Free:
        /                            ${fs_bar 6,75 /}
        /home             ${offset 1}        ${fs_bar 6,75 /home}

Pkgs:      
        ${texeci 10800 python /home/bryan/scripts/pacman.py}

Mail:         ${execi 3000 python ~/scripts/gmail.py} 

MPD:       $mpd_status 
              $mpd_smart
            ($mpd_elapsed / $mpd_length)

"Unix is basically a simple operating system, but you have to be a genius to understand the simplicity." (Dennis Ritchie)

Offline

#24 2007-12-16 08:26:47

[vEX]
Member
From: Sweden
Registered: 2006-11-23
Posts: 450

Re: conky configs and screenshots!

synorgy wrote:

Extremely simple, one color config 30px from the top left corner
http://xs322.xs.to/xs322/07500/conky.jpg.xs.jpg

Looks nice, I'm probably going to steal some of it and change mine. :-)

Last edited by [vEX] (2007-12-16 11:30:56)

PC: Antec P182B | Asus P8Z77-V PRO | Intel i5 3570k | 16GB DDR3 | GeForce 450GTS | 4TB HDD | Pioneer BDR-207D | Asus Xonar DX | Altec Lansing CS21 | Eizo EV2736W-BK | Arch Linux x86_64
HTPC: Antec NSK2480 | ASUS M3A78-EM (AMD 780G) | AMD Athlon X3 425 | 8GB DDR2 | GeForce G210 | 2TB HDD | Arch Linux x86_64
Server: Raspberry Pi (model B) | 512MB RAM | 750GB HDD | Arch Linux ARM

Offline

#25 2007-12-16 11:30:38

[vEX]
Member
From: Sweden
Registered: 2006-11-23
Posts: 450

Re: conky configs and screenshots!

Okay, so I couldn't get it to look the way I wanted. So I started from scratch and did a new one inspired from the ones in this thread.

conky_new.png

# ~/.conkyrc

background no
use_xft no
xftfont Bitstream Vera Sans Mono:size=8
xftalpha 0.8
override_utf8_locale no
update_interval 1.0
total_run_times 0
own_window no
own_window_type normal
own_window_transparent yes
own_window_colour hotpink
double_buffer yes
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes
stippled_borders 0
border_margin 10
border_width 1
default_color white
default_shade_color black
default_outline_color black
alignment bottom_left
gap_x 5
gap_y 29
no_buffers yes
uppercase no
cpu_avg_samples 2
net_avg_samples 2
use_spacer no

TEXT
$sysname $kernel ($machine)
${hr 1}
CPU: ${cpu}%  ${alignr}${freq_dyn}MHz
${cpubar 6}
RAM: ${memperc}% ${alignr}${mem} / ${memmax}
${membar 6}
Swap: ${swapperc}% ${alignr}${swap} / ${swapmax}
${swapbar 6}

Processes: ${running_processes} / ${processes}
Load: ${loadavg 1} ${loadavg 2} ${loadavg 3}

Up:   ${upspeed eth0}kB/s  ${alignr}${totalup eth0}
Down: ${downspeed eth0}kB/s  ${alignr}${totaldown eth0}

CPU:  ${hwmon 1 temp 2}°C   GFX: ${texeci 10 ~/Program/Skript/conky_gputemp.sh}.0°C
Case: ${hwmon 1 temp 1}°C   NB:  ${hwmon 1 temp 3}°C

/      ${alignr}${fs_free /} / ${fs_size /}
${fs_bar 6 /}
/home  ${alignr}${fs_free /home} / ${fs_size /home}
${fs_bar 6 /home}
/tmp   ${alignr}${fs_free /tmp} / ${fs_size /tmp}
${fs_bar 6 /tmp}

The conky_gputemp.sh script (kudos to AriciU):

#!/bin/sh
nvidia-settings -q gpucoretemp  |grep '):' | cut -c 45-46

PC: Antec P182B | Asus P8Z77-V PRO | Intel i5 3570k | 16GB DDR3 | GeForce 450GTS | 4TB HDD | Pioneer BDR-207D | Asus Xonar DX | Altec Lansing CS21 | Eizo EV2736W-BK | Arch Linux x86_64
HTPC: Antec NSK2480 | ASUS M3A78-EM (AMD 780G) | AMD Athlon X3 425 | 8GB DDR2 | GeForce G210 | 2TB HDD | Arch Linux x86_64
Server: Raspberry Pi (model B) | 512MB RAM | 750GB HDD | Arch Linux ARM

Offline

Pages: 1 2 3 … 52

Board footer

Powered by FluxBB