You are not logged in.

#1 2007-12-17 23:15:47

JaDa
Member
From: Sun City, CA (native German)
Registered: 2007-04-06
Posts: 210
Website

clamav 0.92-1

clamav 0.92-1 update

breaks "klamav GUI"


openSUSE
Arch Linux
USALUG

Offline

#2 2007-12-18 02:30:46

djclue917
Member
Registered: 2006-12-03
Posts: 121

Re: clamav 0.92-1

KlamAV is not in the official repos you know because I maintain it in AUR. ;-)

Is this the "breakage" you're talking about?

klamav: error while loading shared libraries: libclamav.so.2: cannot open shared object file: No such file or directory

If yes, then just rebuild it.

Offline

#3 2007-12-18 05:15:22

JaDa
Member
From: Sun City, CA (native German)
Registered: 2007-04-06
Posts: 210
Website

Re: clamav 0.92-1

***** Dazuko
***** Running configure (./configure)...
checking host system type... Linux
checking for make utility... ok (make)
checking for C compiler... ok (cc)
kernel source in /lib/modules/2.6.23-ARCH/source... no
kernel build source in /lib/modules/2.6.23-ARCH/build... yes
kernel source in /lib/modules/2.6.23-ARCH/build... yes
acquiring Linux kernel code configuration... ok
checking if Linux is RSBAC patched... no
checking if devfs is enabled... no
discovered host system... Linux (2.6.23)
checking if security module support is enabled... yes
verifying capabilities are not built-in... ok
locating LSM API header... ok
identifying LSM API (this can take a while)... ok
identifying device API... ok
inspecting class type... ok (class)
inspecting suspend function... ok (suspend2)
checking whether __d_path() is exported... no (using local copy, dangerous)
inspecting task_struct structure... ok (using parent)
disabling ON_CLOSE events (not available for Linux 2.6 LSM)
configure: creating Makefile
configure: creating library/Makefile
configure: creating example_c/Makefile
./configure successful
=======================
 Configuration summary
=======================
module events = ON_OPEN ON_EXEC
devfs support = no
rsbac support = no
stacking support = yes
local __d_path() = yes (WARNING: dangerous for SMP kernels, see README.linux26)
module debug = no
library 1.x compatibility = yes
***** Running make...
make -C /lib/modules/2.6.23-ARCH/build include/linux/version.h include/asm scripts
make[1]: Entering directory `/usr/src/linux-2.6.23-ARCH'
scripts/kconfig/conf -s arch/i386/Kconfig
drivers/crypto/Kconfig:54: can't open file "arch/s390/crypto/Kconfig"
 * make[3]: *** [silentoldconfig] Error 1
 * make[2]: *** [silentoldconfig] Error 2
  CHK     include/linux/version.h
make[1]: `include/asm' is up to date.
 * make[1]: *** No rule to make target `include/config/auto.conf', needed by `scripts'.  Stop.
make[1]: Leaving directory `/usr/src/linux-2.6.23-ARCH'
 * make: *** [dummy_rule] Error 2
***** Return value 2
***** KlamAV
***** Running configure (./configure)...
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for kde-config... /opt/kde/bin/kde-config
checking where to install... /opt/kde (as returned by kde-config)
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether gcc is blacklisted... no
checking whether g++ supports -Wmissing-format-attribute... yes
checking whether g++ supports -Wundef... yes
checking whether g++ supports -Wno-long-long... yes
checking whether g++ supports -Wno-non-virtual-dtor... yes
checking whether g++ supports -fno-reorder-blocks... yes
checking whether g++ supports -fno-exceptions... yes
checking whether g++ supports -fno-check-new... yes
checking whether g++ supports -fno-common... yes
checking whether g++ supports -fexceptions... yes
checking whether system headers can cope with -O2 -fno-inline... irrelevant
checking how to run the C++ preprocessor... g++ -E
checking whether g++ supports -O0... yes
checking whether g++ supports -Wl,--no-undefined... yes
checking whether g++ supports -Wl,--allow-shlib-undefined... yes
not using lib directory suffix
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... gfortran
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag  works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dlopen... (cached) no
checking for dlopen in -ldl... (cached) yes
checking whether a program can dlopen itself... (cached) yes
checking whether a statically linked program can dlopen itself... (cached) yes
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking if C++ programs can be compiled... yes
checking for strlcat... no
checking if strlcat needs custom prototype... yes - in libkdefakes
checking for strlcpy... no
checking if strlcpy needs custom prototype... yes - in libkdefakes
checking for main in -lutil... yes
checking for main in -lcompat... no
checking for crypt in -lcrypt... yes
checking for socklen_t... yes
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for inet_ntoa... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for sys/types.h... (cached) yes
checking for stdint.h... (cached) yes
checking sys/bitypes.h usability... yes
checking sys/bitypes.h presence... yes
checking for sys/bitypes.h... yes
checking for poll in -lpoll... no
checking Carbon/Carbon.h usability... no
checking Carbon/Carbon.h presence... no
checking for Carbon/Carbon.h... no
checking CoreAudio/CoreAudio.h usability... no
checking CoreAudio/CoreAudio.h presence... no
checking for CoreAudio/CoreAudio.h... no
checking if res_init needs -lresolv... yes
checking for res_init... yes
checking if res_init needs custom prototype... no
checking for killpg in -lucb... no
checking for int... yes
checking size of int... 4
checking for short... yes
checking size of short... 2
checking for long... yes
checking size of long... 4
checking for char *... yes
checking size of char *... 4
checking for dlopen in -ldl... (cached) yes
checking for shl_unload in -ldld... no
checking for size_t... yes
checking size of size_t... 4
checking for unsigned long... yes
checking size of unsigned long... 4
checking sizeof size_t == sizeof unsigned long... yes
checking for PIE support... yes
checking if enabling -pie/fPIE support... yes
checking crt_externs.h usability... no
checking crt_externs.h presence... no
checking for crt_externs.h... no
checking for _NSGetEnviron... no
checking for vsnprintf... yes
checking for snprintf... yes
checking for X... libraries /usr/lib, headers .
checking for IceConnectionNumber in -lICE... yes
checking for libXext... yes
checking for pthread_create in -lpthread... yes
checking for extra includes... no
checking for extra libs... no
checking for libz... -lz
checking for libpng... -lpng -lz -lm
checking for libjpeg6b... no
checking for libjpeg... -ljpeg
checking for perl... /usr/bin/perl
checking for Qt... libraries /opt/qt/lib, headers /opt/qt/include using -mt
checking for moc... /opt/qt/bin/moc
checking for uic... /opt/qt/bin/uic
checking whether uic supports -L ... yes
checking whether uic supports -nounload ... yes
checking if Qt needs -ljpeg... no
checking for rpath... yes
checking for KDE... libraries /opt/kde/lib, headers /opt/kde/include
checking if UIC has KDE plugins available... yes
checking for KDE paths... defaults
checking for dcopidl... /opt/kde/bin/dcopidl
checking for dcopidl2cpp... /opt/kde/bin/dcopidl2cpp
checking for mcopidl... /opt/kde/bin/mcopidl
checking for artsc-config... /opt/kde/bin/artsc-config
checking for meinproc... /opt/kde/bin/meinproc
checking for kconfig_compiler... /opt/kde/bin/kconfig_compiler
checking for dcopidlng... /opt/kde/bin/dcopidlng
checking for makekdewidgets... /opt/kde/bin/makekdewidgets
checking for xmllint... /usr/bin/xmllint
checking whether byte ordering is bigendian... no
checking for MAXPATHLEN... 4096
checking for pkg-config... yes
checking for int... (cached) yes
checking size of int... (cached) 4
checking for short... (cached) yes
checking size of short... (cached) 2
checking for long... (cached) yes
checking size of long... (cached) 4
checking for char *... (cached) yes
checking size of char *... (cached) 4
checking for KDE version... KDE 3.5.x (x >=2) or SVN trunk
checking for cl_scanfile in -lclamav... yes
checking if doc should be compiled... yes
checking if po should be compiled... yes
checking if src should be compiled... yes
configure: creating ./config.status
 * wrong input (flag != 4) at admin/conf.change.pl line 117, <> line 1254.
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating doc/en/Makefile
config.status: creating po/Makefile
config.status: creating src/Makefile
config.status: creating src/about/Makefile
config.status: creating src/action/Makefile
config.status: creating src/arkollon/Makefile
config.status: creating src/icons/Makefile
config.status: creating src/klamd/Makefile
config.status: creating src/klammail/Makefile
config.status: creating src/sqlite/Makefile
config.status: creating config.h
config.status: executing depfiles commands
Good - your configure finished. Start make now
***** Running make...
make  all-recursive
make[1]: Entering directory `/tmp/selfgz1491325271/klamav-0.41.1'
Making all in doc
make[2]: Entering directory `/tmp/selfgz1491325271/klamav-0.41.1/doc'
Making all in .
make[3]: Entering directory `/tmp/selfgz1491325271/klamav-0.41.1/doc'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/tmp/selfgz1491325271/klamav-0.41.1/doc'
Making all in en
make[3]: Entering directory `/tmp/selfgz1491325271/klamav-0.41.1/doc/en'
/opt/kde/bin/meinproc --check --cache index.cache.bz2 ./index.docbook
make[3]: Leaving directory `/tmp/selfgz1491325271/klamav-0.41.1/doc/en'
make[2]: Leaving directory `/tmp/selfgz1491325271/klamav-0.41.1/doc'
Making all in po
make[2]: Entering directory `/tmp/selfgz1491325271/klamav-0.41.1/po'
rm -f zh_CN.gmo; /usr/bin/msgfmt -o zh_CN.gmo ./zh_CN.po
test ! -f zh_CN.gmo || touch zh_CN.gmo
rm -f fr.gmo; /usr/bin/msgfmt -o fr.gmo ./fr.po
test ! -f fr.gmo || touch fr.gmo
rm -f hu.gmo; /usr/bin/msgfmt -o hu.gmo ./hu.po
test ! -f hu.gmo || touch hu.gmo
rm -f it.gmo; /usr/bin/msgfmt -o it.gmo ./it.po
test ! -f it.gmo || touch it.gmo
make[2]: Leaving directory `/tmp/selfgz1491325271/klamav-0.41.1/po'
Making all in src
make[2]: Entering directory `/tmp/selfgz1491325271/klamav-0.41.1/src'
Making all in icons
make[3]: Entering directory `/tmp/selfgz1491325271/klamav-0.41.1/src/icons'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/tmp/selfgz1491325271/klamav-0.41.1/src/icons'
Making all in klammail
make[3]: Entering directory `/tmp/selfgz1491325271/klamav-0.41.1/src/klammail'
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT clamdmail.o -MD -MP -MF ".deps/clamdmail.Tpo" -c -o clamdmail.o clamdmail.c; \
    then mv -f ".deps/clamdmail.Tpo" ".deps/clamdmail.Po"; else rm -f ".deps/clamdmail.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT options.o -MD -MP -MF ".deps/options.Tpo" -c -o options.o options.c; \
    then mv -f ".deps/options.Tpo" ".deps/options.Po"; else rm -f ".deps/options.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT treewalk.o -MD -MP -MF ".deps/treewalk.Tpo" -c -o treewalk.o treewalk.c; \
    then mv -f ".deps/treewalk.Tpo" ".deps/treewalk.Po"; else rm -f ".deps/treewalk.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT output.o -MD -MP -MF ".deps/output.Tpo" -c -o output.o output.c; \
    then mv -f ".deps/output.Tpo" ".deps/output.Po"; else rm -f ".deps/output.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT memory.o -MD -MP -MF ".deps/memory.Tpo" -c -o memory.o memory.c; \
    then mv -f ".deps/memory.Tpo" ".deps/memory.Po"; else rm -f ".deps/memory.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT cfgparser.o -MD -MP -MF ".deps/cfgparser.Tpo" -c -o cfgparser.o cfgparser.c; \
    then mv -f ".deps/cfgparser.Tpo" ".deps/cfgparser.Po"; else rm -f ".deps/cfgparser.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT client.o -MD -MP -MF ".deps/client.Tpo" -c -o client.o client.c; \
    then mv -f ".deps/client.Tpo" ".deps/client.Po"; else rm -f ".deps/client.Tpo"; exit 1; fi
/bin/sh ../../libtool --silent --tag=CC --mode=link gcc  -O2     -o klammail  clamdmail.o options.o treewalk.o output.o memory.o cfgparser.o client.o -lclamav 
make[3]: Leaving directory `/tmp/selfgz1491325271/klamav-0.41.1/src/klammail'
Making all in klamd
make[3]: Entering directory `/tmp/selfgz1491325271/klamav-0.41.1/src/klamd'
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT output.o -MD -MP -MF ".deps/output.Tpo" -c -o output.o output.c; \
    then mv -f ".deps/output.Tpo" ".deps/output.Po"; else rm -f ".deps/output.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT cfgparser.o -MD -MP -MF ".deps/cfgparser.Tpo" -c -o cfgparser.o cfgparser.c; \
    then mv -f ".deps/cfgparser.Tpo" ".deps/cfgparser.Po"; else rm -f ".deps/cfgparser.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT getopt.o -MD -MP -MF ".deps/getopt.Tpo" -c -o getopt.o getopt.c; \
    then mv -f ".deps/getopt.Tpo" ".deps/getopt.Po"; else rm -f ".deps/getopt.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT memory.o -MD -MP -MF ".deps/memory.Tpo" -c -o memory.o memory.c; \
    then mv -f ".deps/memory.Tpo" ".deps/memory.Po"; else rm -f ".deps/memory.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT misc.o -MD -MP -MF ".deps/misc.Tpo" -c -o misc.o misc.c; \
    then mv -f ".deps/misc.Tpo" ".deps/misc.Po"; else rm -f ".deps/misc.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT network.o -MD -MP -MF ".deps/network.Tpo" -c -o network.o network.c; \
    then mv -f ".deps/network.Tpo" ".deps/network.Po"; else rm -f ".deps/network.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT options.o -MD -MP -MF ".deps/options.Tpo" -c -o options.o options.c; \
    then mv -f ".deps/options.Tpo" ".deps/options.Po"; else rm -f ".deps/options.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT klamd.o -MD -MP -MF ".deps/klamd.Tpo" -c -o klamd.o klamd.c; \
    then mv -f ".deps/klamd.Tpo" ".deps/klamd.Po"; else rm -f ".deps/klamd.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT tcpserver.o -MD -MP -MF ".deps/tcpserver.Tpo" -c -o tcpserver.o tcpserver.c; \
    then mv -f ".deps/tcpserver.Tpo" ".deps/tcpserver.Po"; else rm -f ".deps/tcpserver.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT localserver.o -MD -MP -MF ".deps/localserver.Tpo" -c -o localserver.o localserver.c; \
    then mv -f ".deps/localserver.Tpo" ".deps/localserver.Po"; else rm -f ".deps/localserver.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT session.o -MD -MP -MF ".deps/session.Tpo" -c -o session.o session.c; \
    then mv -f ".deps/session.Tpo" ".deps/session.Po"; else rm -f ".deps/session.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT thrmgr.o -MD -MP -MF ".deps/thrmgr.Tpo" -c -o thrmgr.o thrmgr.c; \
    then mv -f ".deps/thrmgr.Tpo" ".deps/thrmgr.Po"; else rm -f ".deps/thrmgr.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT server-th.o -MD -MP -MF ".deps/server-th.Tpo" -c -o server-th.o server-th.c; \
    then mv -f ".deps/server-th.Tpo" ".deps/server-th.Po"; else rm -f ".deps/server-th.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT scanner.o -MD -MP -MF ".deps/scanner.Tpo" -c -o scanner.o scanner.c; \
    then mv -f ".deps/scanner.Tpo" ".deps/scanner.Po"; else rm -f ".deps/scanner.Tpo"; exit 1; fi
 * scanner.c: In function ‘scanstream’:
 * scanner.c:399: warning: assignment makes pointer from integer without a cast
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT others.o -MD -MP -MF ".deps/others.Tpo" -c -o others.o others.c; \
    then mv -f ".deps/others.Tpo" ".deps/others.Po"; else rm -f ".deps/others.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT clamuko.o -MD -MP -MF ".deps/clamuko.Tpo" -c -o clamuko.o clamuko.c; \
    then mv -f ".deps/clamuko.Tpo" ".deps/clamuko.Po"; else rm -f ".deps/clamuko.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT dazukoio_compat12.o -MD -MP -MF ".deps/dazukoio_compat12.Tpo" -c -o dazukoio_compat12.o dazukoio_compat12.c; \
    then mv -f ".deps/dazukoio_compat12.Tpo" ".deps/dazukoio_compat12.Po"; else rm -f ".deps/dazukoio_compat12.Tpo"; exit 1; fi
if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I/opt/kde/include -I/opt/qt/include -I.   -DQT_THREAD_SUPPORT  -D_REENTRANT  -O2   -MT dazukoio.o -MD -MP -MF ".deps/dazukoio.Tpo" -c -o dazukoio.o dazukoio.c; \
    then mv -f ".deps/dazukoio.Tpo" ".deps/dazukoio.Po"; else rm -f ".deps/dazukoio.Tpo"; exit 1; fi
/bin/sh ../../libtool --silent --tag=CC --mode=link gcc  -O2     -o klamd  output.o cfgparser.o getopt.o memory.o misc.o network.o options.o klamd.o tcpserver.o localserver.o session.o thrmgr.o server-th.o scanner.o others.o clamuko.o dazukoio_compat12.o dazukoio.o -lclamav 
 * scanner.o: In function `scanstream':
 * scanner.c:(.text+0x213): undefined reference to `cli_gentempdesc'
 * collect2: ld returned 1 exit status
 * make[3]: *** [klamd] Error 1
make[3]: Leaving directory `/tmp/selfgz1491325271/klamav-0.41.1/src/klamd'
 * make[2]: *** [all-recursive] Error 1
 * make[1]: *** [all-recursive] Error 1
 * make: *** [all] Error 2
make[2]: Leaving directory `/tmp/selfgz1491325271/klamav-0.41.1/src'
make[1]: Leaving directory `/tmp/selfgz1491325271/klamav-0.41.1'
***** Return value 2

openSUSE
Arch Linux
USALUG

Offline

Board footer

Powered by FluxBB