Arch Linux

axion419

Member

Registered: 2007-04-12

Posts: 185

How Set up bashburn? Where are my CDRW/DVDRW drives :)

This is the output of the configuration,
1) CD Writer
The burner is supposed to be entered as 0,0,0 (For SCSI)
ATAPI:0,0,0 or /dev/hdX (For IDE burners)
(Where hdX is the proper drive, like hdc)
You can also use the device name i.e, yahama, sanyo, etc.
if /etc/default/cdrecord is properly configured.
Auto detect mode: type auto
+----------------+-------------+----------------+
(Possible) SCSI DEVICES:
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.

(Possible) IDE DEVICES:
WARNING: the ATA: method is considered deprecated on modern kernels!
Use --devices to display the native names.
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.

/dev/cdrom /mnt/cdrom   iso9660   ro,user,noauto,unhide   0      0
/dev/cdrom1 /mnt/cdrom1   iso9660   ro,user,noauto,unhide   0      0
/dev/dvd /mnt/dvd   udf   ro,user,noauto,unhide   0      0
---
2)CD Writer Device File
The path to the cdrom device file is usually something like /dev/cdrom or /dev/dvd

List of possible cdrom drives (According to /etc/fstab):

/dev/cdrom /mnt/cdrom   iso9660   ro,user,noauto,unhide   0      0
/dev/cdrom1 /mnt/cdrom1   iso9660   ro,user,noauto,unhide   0      0
/dev/dvd /mnt/dvd   udf   ro,user,noauto,unhide   0      0
----
3)CD-Reader Mount Point

The mountpoint to your cdrom is usually something like /mnt/cdrom or /mnt/dvd
List of possible cdrom drives (According to /etc/fstab):

/dev/cdrom /mnt/cdrom   iso9660   ro,user,noauto,unhide   0      0
/dev/cdrom1 /mnt/cdrom1   iso9660   ro,user,noauto,unhide   0      0
/dev/dvd /mnt/dvd   udf   ro,user,noauto,unhide   0      0

---
I  am clueless, i normally use k3b, but im trying to avoid the kde libraries.  I tried graveman but when i scan for drives it freezes.
Any help would be awesome.

fwojciec

Member

Registered: 2007-05-20

Posts: 1,411

Re: How Set up bashburn? Where are my CDRW/DVDRW drives :)

My setup is different than yours, I think, because I use hal instead of entries in fstab to mount cds and dvds...  In either case, this is what my bashburn config screen looks like:

+----------------+
| BashBurn 2.1.2 |
+----------------+
|
|-(Setup)            (Current value)
| 1) CD-Writer            (/dev/sr0)
| 2) CD-Reader Device File    (/dev/sr0)
| 3) CD-Reader Mount Point    (/mnt/dvd)
| 4) Speed            (-1)
| 5) Blanking Type        (fast)
| 6) Number of Devices        (1)
| 7) Root Directory        (/usr/share/bashburn)
| 8) Burn Directory        (/tmp/burn)
| 9) CD Label            (label)
| 10) Copyright            (GNU GENERAL PUBLIC LICENSE)
| 11) Author            (<Change me>)
| 12) Publisher            (<Change me>)
| 13) Description        (Burnt with BashBurn)
| 14) Name of the package    (<Change me>)
| 15) Normalize            (no)
| 16) Driver options        ()
| 17) FIFO directory        (/tmp)
| 18) Delete temp after burn    (no)
| 19) Allow overburn        (no)
| 20) Copy protection        (no)
| 21) Set the Bitrate        (192)
| 22) Language            (English)
| 23) DAO/TAO            (-tao)
| 24) Gap between tracks    (-nopad)
|
  |- # 25) Apply changes      # 26) Apply defaults      # 0) Back 

Your Choice? |>

axion419

Member

Registered: 2007-04-12

Posts: 185

Re: How Set up bashburn? Where are my CDRW/DVDRW drives :)

alright i installed HAL and set it up, so how would i go about figuring out my mnt points?  I have a cdrw drive, no dvd.  Well i have a dvd but it stopped opening

Last edited by axion419 (2007-12-20 23:52:28)