You are not logged in.
Pages: 1
i've plugged my Hauppauge WinTV USB 2 and dmesg tells me this:
Linux video capture interface: v2.00
em28xx v4l2 driver version 0.0.1 loaded
em28xx new video device (2040:4200): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 1024
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
em28xx #0: AC97 command still being executed: not handled properly!
tuner 4-0043: chip found @ 0x86 (em28xx #0)
tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 4-0043: type set to tda9887
tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 4-0043: type set to tda9887
tuner 4-0063: chip found @ 0xc6 (em28xx #0)
tuner-simple 4-0063: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
tuner 4-0063: type set to Philips NTSC MK3 (F
tuner-simple 4-0063: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
tuner 4-0063: type set to Philips NTSC MK3 (F
em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 00 42 20 00 1e 03 82 18 6a 18
em28xx #0: i2c eeprom 10: 00 00 24 57 6e 00 00 00 60 00 00 00 02 00 00 00
em28xx #0: i2c eeprom 20: 1e 00 10 10 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 01 01 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 30 00 30 00
em28xx #0: i2c eeprom 70: 30 00 32 00 38 00 30 00 39 00 38 00 33 00 32 00
em28xx #0: i2c eeprom 80: 00 00 18 03 57 00 69 00 6e 00 54 00 56 00 20 00
em28xx #0: i2c eeprom 90: 55 00 53 00 42 00 32 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f 74 3e 23 23 a4 92 15 89
em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 e8 df
em28xx #0: i2c eeprom c0: 2a 00 74 02 01 06 03 79 5c 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f 74 3e 23 23 a4 92 15 89
em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 e8 df
em28xx #0: i2c eeprom f0: 2a 00 74 02 01 06 03 79 5c 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 2040:4200
I2S audio, sample rate=32k
500mA max power
Table at 0x24, strings=0x1882, 0x186a, 0x0000
input: i2c IR (EM2840 Haup as /devices/virtual/input/input7
ir-kbd-i2c: i2c IR (EM2840 Haup detected at i2c-4/4-0030/ir0 [em28xx #0]
msp3400 4-0044: MSP3415G-B8 found @ 0x88 (em28xx #0)
msp3400 4-0044: MSP3415G-B8 supports nicam and radio, mode is autodetect and autoselect
tveeprom 4-0050: Hauppauge model 42019, rev B162, serial# 2809832
tveeprom 4-0050: tuner model is LG S701D MK3 (idx 62, type 38)
tveeprom 4-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 4-0050: audio processor is MSP3415 (idx 6)
tveeprom 4-0050: has radio
tvp5150 4-005c: tvp5150am1 detected.
em28xx #0: AC97 command still being executed: not handled properly!
registered VBI
em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
em28xx #0: Found Hauppauge WinTV USB 2
em28xx audio device (2040:4200): interface 1, class 1
em28xx audio device (2040:4200): interface 2, class 1
usbcore: registered new interface driver em28xx
usbcore: registered new interface driver snd-usb-audionow, how could i record something? I saw mythv doesn't support my card...:(
Offline
Pages: 1