Arch Linux

Usul

Member

Registered: 2007-05-17

Posts: 31

Problems with v4l-dvb-experimental after last kernel update

I have an USB-DVB-T-Stick, X-Tensions XD-380. It has an em2880 chipset, and I had to compile the necessary module em2880-dvb from Linuxtv.org. Everything works fine - since last kernel update. Now I can't load the module, I get the following error:

em28xx v4l2 driver version 0.0.1 loaded
em28xx new video device (1ae7:0380): interface 0, class 255
em28xx: device is attached to a USB 2.0 bus
em28xx: you're using the experimental/unstable tree from mcentral.de
em28xx: there's also a stable tree available but which is limited to
em28xx: linux <=2.6.19.2
em28xx: it's fine to use this driver but keep in mind that it will move
em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's
em28xx: proved to be stable
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
attach_inform: eeprom detected.
em28xx #0: i2c eeprom 00: 1a eb 67 95 e7 1a 80 03 c0 12 62 40 6a 22 00 00
em28xx #0: i2c eeprom 10: 00 00 04 57 6a 0d 00 00 60 00 00 00 02 00 00 00
em28xx #0: i2c eeprom 20: 54 00 00 00 f0 10 01 00 00 00 00 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00 30 00 20 00 44 00
em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 1ae7:0380
No audio on board.
500mA max power
Table at 0x04, strings=0x226a, 0x0000, 0x0000
em28xx #0: Found Kworld 355 U DVB-T
usbcore: registered new interface driver em28xx
em2880_dvb: Unknown symbol dvb_frontend_eventstatus

I tried to clean up everything and build the module again, but the error remains. I checked the cvs roughly for changes in dvb, but I can't find anything. Any hints about what changed, which caused the message "Unknown symbol dvb_frontend_eventstatus"?

Usul

Member

Registered: 2007-05-17

Posts: 31

Re: Problems with v4l-dvb-experimental after last kernel update

Problem solved, module works again. It seems, that only a reboot was necessary