You are not logged in.
The cmake build of the playground dies around apple dashboard compatiblity.
Also, while the packages install the amarok context widget, it is not accessible from amarok.
Offline
The cmake build of the playground dies around apple dashboard compatiblity.
It seems to be broken now, and needs patching up qt-copy.
So you just have to cd to src/plasma/applets and edit the CMakeLists.txt file (comment out the line mentioning "add (webapplet)" if I remember correctly). I also made a quickie PKGBUILD.
pkgname=playground-plasma
pkgver=4.1.0
pkgrel=20080403
pkgdesc="Plasma Applets, Engines etc. from playground"
url="http://websvn.kde.org/trunk/playground/base/plasma/"
arch=(i686 x86_64)
license=(GPL)
depends=('qt' 'kdelibs' 'kdebase' 'plasma')
makedepends=('cmake' 'kdelibs-dev' 'kdebase-dev')
source=()
md5sums=()
build() {
svn co svn://anonsvn.kde.org/home/kde/trunk/playground/base/plasma/
cd $srcdir/plasma
cmake . -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=release
make DESTDIR=$pkgdir install || return 1
}
Offline
http://aoi.ruinevil.com/playground-plas … pkg.tar.gz
CFLAGS="-march=prescott -O2 -pipe -fomit-frame-pointer"
CXXFLAGS="${CFLAGS}"
0403 doesn't allow me to log in.
Last edited by ruinevil (2008-04-03 05:01:44)
Offline
thanks for the PKGBUILD ... it worked for me after I commented out webapplets
Offline
@zephyr: yes, thanks for the pkgbuild, playground-plasma and gtk-qt-copy should be in 20080404. No luck with the gstreamer engine for phonon though.
build() {
cd $srcdir/$pkgname-$pkgver
patch -p2 -i ../no_webapplet.patch || return 1
mkdir -p $srcdir/build && cd $srcdir/build || return 1
cmake ../$pkgname-$pkgver -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Release
make DESTDIR=$pkgdir install || return 1
}
and no_webapplet.patch
--- src/plasma/applets/CMakeLists.txt.orig 2008-04-04 00:07:12.000000000 +1000
+++ src/plasma/applets/CMakeLists.txt 2008-04-04 00:09:27.000000000 +1000
@@ -37,7 +37,7 @@
if(QT_QTWEBKIT_FOUND)
add_subdirectory(cia.vc)
add_subdirectory(weather)
- add_subdirectory(webapplet)
+# add_subdirectory(webapplet)
endif(QT_QTWEBKIT_FOUND)
if(BLITZ_FOUND)
Offline
I just wanted to say thanks! I have finally made the total switch from kde 3 and have been using the daily builds for a week. 4.1 is gonna kick a**.
Offline
@somairotevoli: thanks for thanks. I think 4.1 will be what the initial 4.0 release shoud have been but I understand why 4.0 was released, as it was, as it definitely accelerated the path to 4.1. Every week has seen a definite and obvious improvement over the previous week. To go from a barely usable system to something that is "almost perfect" in the 6 weeks that I've been doing these packages is amazing, it's exciting to witness and I don't think we'll ever see this significant rate of change in KDE (or any desktop system) ever again once 4.1 is out. Hopefully k3b and konversation will join the package set soon.
@laleshii: thanks for the folderview applet hint, it's definitely a must have as I really missed the kde3 desktop metaphor and this applet makes up for it, maybe even better.
@SoftVision: tar tf some.bz2 to check the contents of a tarball and tar xf some.bz2 to extract and tar cjf some-4.1.0.tar.bz2 some-4.1.0 --exclude-vcs to create a svn savvy tarball in /home/sources or wherever $SRCDEST is set to in /etc/makepkg.conf.
Offline
Cannot login via kdm with kdelibs 20080403 and 20080404, when push "Login" appears blank screen (it looks like x-server restarts) and then appears kdm greetengs screen again. Anybody have these problem?
Offline
Cannot login via kdm with kdelibs 20080403 and 20080404, when push "Login" appears blank screen (it looks like x-server restarts) and then appears kdm greetengs screen again. Anybody have these problem?
I have the same problem. It must be a kdm problem since I can enter KDE.
A solution to enter KDE is to stop kdm and startx.
/etc/rc.d/kdm stop (as root)
startx
or
startx /usr/bin/startkde (as user)
.
Offline
Cannot login via kdm with kdelibs 20080403 and 20080404, when push "Login" appears blank screen (it looks like x-server restarts) and then appears kdm greetengs screen again. Anybody have these problem?
Yes, I can confirm this...
Offline
@Belitsky.A: if you get really stuck then follow something like this... reboot and hit "e" on your boot line in grub, arrow down to the kernel line, hit "e" again and add "single" to the end of that line, hit "enter" then "b" to continue booting into single user mode. Log in as root and "nano /etc/rc.conf" and add a "!" in front of the kdm entry in the DAEMONS=() line at the end of that file, ctrl-x y and enter to quit and save from nano. Perhaps "nano /home/your_username/.xinitrc" and make sure it has "exec /usr/bin/startkde" too. Reboot and login as your_username then type startx. To test kdm, "su -" to root and type "/etc/rc.d/kdm start" and you might see some messages about why kdm is not starting. If the error looks obvious then consider reporting it to http://bugs.kde.org. I've been using startx so I haven't noticed this error and will look at it later tonight.
Offline
I'm trying to compile kmplayer for kde4 (for flash support), but there is no qmake for qt4. Shouldn't qt-copy have that executable; The only executable qt-copy 4.4.0-20080404 has is qtconfig. Any hints on what i should do?
Silly question actually. I hadn't installed qt-copy-dev.
Last edited by capthookb (2008-04-05 10:22:52)
Offline
@capthookb: yes, you needed qt-copy-dev. If you have any luck with kmplayer then post your pkgbuild and I'll try and include it with the binary packages.
Offline
Sure, no problem. I just edited the PKGBUILD from abs. Although i'm not sure about if the depends is correct. It compiles fine.
# $Id: PKGBUILD,v 1.31 2007/12/28 10:23:14 damir Exp $
# Maintainer: damir <damir@archlinux.org>
# Contributor: Damir Perisa <damir.perisa@bluewin.ch>
pkgname=kmplayer
pkgver=0.11.0
origver=0.11.0-rc3
force=y
pkgrel=1
pkgdesc="Video player plugin for Konqueror and basic MPlayer/Xine/ffmpeg/ffserver/VDR frontend for KDE"
arch=("i686" "x86_64")
license=('GPL2')
url="http://kmplayer.kde.org"
depends=('libx11' 'libxv' 'cairo' 'kdelibs>=3.5.8' 'gstreamer0.10-base' 'xine-lib' 'dbus-glib' 'qt-copy' 'dbus-qt3' 'gtk2')
# gtk2 and dbus-glib is needed only by opt/kde/bin/knpplayer so it probably may be also made optional if needed
source=($url/pkgs/$pkgname-$origver.tar.bz2)
build() {
export QTDIR=/usr
export KDEDIR=/usr
export KDEDIRS=$KDEDIR
export KDE_BUILD=$KDEDIR
export DBUSDIR=$KDEDIR
export LD_LIBRARY_PATH=$QTDIR/lib:$KDEDIR/lib:$LD_LIBRARY_PATH
export PKG_CONFIG_PATH=$DBUSDIR/lib/pkgconfig:/usr/lib/pkgconfig
export PATH=$QTDIR/bin:$KDEDIR/bin:$PATH
export MAKEFLAGS="-j1"
cd $startdir/src/$pkgname-$origver
cmake -DCMAKE_INSTALL_PREFIX=$startdir/pkg/usr -DCMAKE_BUILD_TYPE=release $startdir/src/$pkgname-$origver
make || return 1
make prefix=$startdir/pkg/usr install
rm -f ${startdir}/pkg/usr/share/mimelnk/application/x-mplayer2.desktop
}
md5sums=('383652c4bc867daacbc911594807a381')
Has anyone compiled kvirc for kde4; I read something in the first page.
Offline
Why do the packages don't install in /opt/kde4 .. (I've always prefered that way)?
Offline
Hi,
I can not see any partitions in hardisk monitor plasmoid, Is there something I need to configure.
Thanks
Sri
Offline
Shouldn't klaptop be somewhere in this packages? Can't find this...
Offline
Is this right? My laptop is getting extremely hot, and it's not doing very much at all! It's at about 3% CPU usage..in fact, the I just found out that the memory is getting very hot. Is there a reason for this? Here's my "top":
3713 michael 20 0 449m 40m 23m S 4 4.1 1:07.54 plasma
3585 root 20 0 458m 82m 5924 S 2 8.3 1:39.54 X
3994 michael 20 0 207m 20m 13m S 2 2.0 0:00.57 konsole
3777 michael 20 0 311m 182m 16m S 1 18.3 1:15.97 opera
3749 michael 20 0 164m 12m 9728 S 0 1.3 0:01.96 klipper
3998 michael 20 0 12596 1208 900 R 0 0.1 0:00.03 top
Do you think it could be Opera?
EDIT: Just found out that Konqueror, Firefox 3 and Opera seem to be using a lot of memory..about 18% like Opera on here??
Last edited by miggols99 (2008-04-06 22:14:58)
Offline
And can't compile lapsus for kde4. Is there something similar?
Offline
@damjan: re /opt/kde4, it would make some things easier, especially intergration with standard kde/kdemod but I generally dislike /opt for anything. I consider KDE a first class citizen and not something that is optional. A benefit is that the PKGBUILDs are simpler and do not require special KDEDIRS or PATH settings because the componets are placed in standard system areas.
@srimalik: mine seems to work okay. Perhaps RMB on the plasmoid and check the Hard Disk Monitor Settings. Maybe your user does not have permissions for some partitions.
@alcazoid: good point as there is klaptopdaemon code in kdeutils but the package was missing tpctl (Think Pad utils) as a dependency, however when I rebuilt kdeutils just now it's still not available. Re lapsus, the website (http://lapsus.berlios.de/) says it requires "Qt >=3.3 <4 library" so it's obviously not ported to kde4 yet. I wish I had the time to look into it as it's probably an ideal small project to port to kde4. Perhaps ask the author if he intends to do so.
@miggols99: re laptop heat, I wonder if the new background processes like nepomuk keep the cpu active. iostat and vmstat from the extra/sysstat package may be useful to help visualize what resources are being used. My ps RES field for plasma is 35Mb and firefox2+firebug is 69Mb on startup, X is 60Mb and consistantly at the top of top but with only about 1% usage. I find plasma bursts up to 10%+ at times.
Offline
(Conflicting Files) ... Is this a error on my end on or the current packages 20080411 ?
It's a glitch that isn't too serious. Various subversion chunks get moved around every now and then and sometimes a daily snapshot is going to catch these moves midstream, or the svn changes take days to complete. It is usually quite safe to just force (-f) the package install or upgrade when it's simply a matter of overwriting some files. I think libplasma will be moved into kdelibs over the next month or so (for 4.1) so that will probably cause more of these conflicting files.
Offline
I can not open konqueror, get error
There was an error loading the module KHTML.
The diagnostics is:
QLibrary::load_sys: Cannot load /usr/lib/kde4/libkhtmlpart.so (libungif.so.4: cannot open shared object file: No such file or directory)
Offline
@mini: I guess you need to install libungif. I'll add it as part of the dependencies for kdelibs. Thanks for the notice.
# ldd /usr/lib/kde4/libkhtmlpart.so | grep gif
libungif.so.4 => /usr/lib/libungif.so.4 (0x00002b034216e000)
# pacman -Qo /usr/lib/libungif.so.4
/usr/lib/libungif.so.4 is owned by libungif 4.1.4-1
Update: libungif already is a dependency for kdelibs so I'm not sure why you got that error. Anyway, reinstalling libungif might help. ANother thought is I only build against [core] and not [testing] so if you use [testing] then you might have a later libungif library version. If so then you need to comment out the [testing] section, update again and force an install of the libundif from extra. Let us know if this is the case as it might catch out other users.
Last edited by markc (2008-04-12 08:20:28)
Offline
Thank you, reinstalling libungif helped
Offline
Hello.
@markc
I just wanted to inform you that webapplet compiles fine for the last 3 days.
Also I created a PKGBUILD for the Konqueror plugins since I use Konqi for my daily browsing. It includes the search bar, crash handler etc. and I thought I should share it.
Keep up the good work.
EDIT: Updated the PKGBUILD so as not to confuse people.
pkgname=extragear-base
pkgver=4.1.0
pkgrel=20080413
pkgdesc="Konqueror Plugins from extragear"
url="http://websvn.kde.org/trunk/extragear/base/konq-plugins"
arch=(i686 x86_64)
license=(GPL)
depends=('qt' 'kdelibs' 'kdebase' 'libxft-lcd' 'webkitkde')
makedepends=('cmake' 'kdelibs-dev' 'kdebase-dev')
source=()
md5sums=()build() {
svn co svn://anonsvn.kde.org/home/kde/trunk/extragear/base/
cd $srcdir/base
cmake . -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=release
make DESTDIR=$pkgdir install || return 1
}
Last edited by zephyr (2008-04-14 19:00:57)
Offline