About Adobe Flash Player and Adobe Reader

satimis · 2008-04-09 12:02:15

Hi folks,

Archlinux 86-64 2007-08-2
SeaMonkey 1.1.6,

I need to install Adobe Flash Player and Adobe Reader

I found following link;
http://wiki.archlinux.org/index.php/Ins … _on_Arch64

But not for Seamonkey. Does it work on Seamonkey. Besides it's flash plugin. Would it be the same as Adobe Flash Player?

Does 32bit Adobe Reader works on 64bit Seamonkey. Where can I download it? Where can I find its installation document?

TIA

B.R.
satimis

skottish · 2008-04-09 12:37:13

It should work fine with the instructions from above.

satimis · 2008-04-14 02:45:03

skottish wrote:

It should work fine with the instructions from above.

Thanks for your advice.

Performed following steps

$ mkdir nspluginwrapper
$ mkdir nspluginwrapper_flash

$ cd nspluginwrapper

Download;
nspluginwrapper on this folder

$ tar zxpf nspluginwrapper.tar.gz
$ ls

nspluginwrapper  nspluginwrapper.tar.gz

$ cd nspluginwrapper
$ ls

PKGBUILD  nspluginwrapper.install  rpmextract.sh

$ su
Password:
# makepkg -i

==> ERROR: Running makepkg as root is a BAD idea and can cause
    permanent, catastrophic damage to your system. If you
    wish to run as root, please use the --asroot option.

I was stuck here. Whether I should follow the guide OR run "./nspluginwrapper.install"?

TIA

Edit:

I found following thread;
makepkg issues since pacman upgrade
http://bbs.archlinux.org/viewtopic.php?pid=316497

According to fwojciec' suggetion (2008-01-13 06:58:03) whether I have to make both "/etc/makepkg.conf" and "etc/makepkg.conf.pacnew" identical? IIRC I haven't upgraded Arch just installing it couple months ago.

B.R.
satimis

Last edited by satimis (2008-04-14 03:09:01)

theringmaster · 2008-04-14 14:35:26

yeah don't ever run makepkg as root. It's not an issue, just a security concern.

satimis · 2008-04-15 16:46:08

theringmaster wrote:

yeah don't ever run makepkg as root. It's not an issue, just a security concern.

Thanks for your advice.

Even I ignore the warning the package has not been installed.

# which nspluginwrapper

which: no nspluginwrapper in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/opt/mozilla/bin:/usr/bin/perlbin/site:/usr/bin/perlbin/vendor:/usr/bin/perlbin/core:/opt/qt/bin)

# locate nspluginwrapper

/home/satimis/nspluginwrapper
/home/satimis/nspluginwrapper_flash
/home/satimis/nspluginwrapper/nspluginwrapper
/home/satimis/nspluginwrapper/nspluginwrapper.tar.gz
/home/satimis/nspluginwrapper/nspluginwrapper/PKGBUILD
/home/satimis/nspluginwrapper/nspluginwrapper/nspluginwrapper.install
/home/satimis/nspluginwrapper/nspluginwrapper/rpmextract.sh
/home/satimis/nspluginwrapper_flash/nspluginwrapper-flash
/home/satimis/nspluginwrapper_flash/nspluginwrapper-flash.tar.gz
/home/satimis/nspluginwrapper_flash/nspluginwrapper-flash/PKGBUILD
/home/satimis/nspluginwrapper_flash/nspluginwrapper-flash/adobe_eula.txt
/home/satimis/nspluginwrapper_flash/nspluginwrapper-flash/plugin.install

Any suggestion? TIA

B.R.
satimis

ghostHack · 2008-04-15 19:14:26

Assuming you had run

updatedb

before doing

locate ndiswrapper

it looks like the package didn't build. Go back to your nspluginwrapper directory and run

makepkg

as your user, if this completes successfully it should create a file called something like

nspluginwrapper-0.9.91.5-3-x86_64.pkg.tar.gz

probably in the current directory. It may fail initially due to unsatisfied dependencies but you should be able to install them using pacman since I think all the lib32- stuff is in [Community] now.

You then need to install the package (as root) with

pacman -U nspluginwrapper-0.9.91.5-3-x86_64.pkg.tar.gz

Also, if you haven't updated you system for a couple of months it is probably a good idea to do it now.

theringmaster · 2008-04-15 19:16:04

OR you could try gnash. It has a native x64 port, but it is only compatible with up to flash 7 or8

satimis · 2008-04-16 02:59:18

ghostHack wrote:

Assuming you had run
updatedb
before doing
locate ndiswrapper
it looks like the package didn't build. Go back to your nspluginwrapper directory and run
makepkg
as your user, if this completes successfully it should create a file called something like
nspluginwrapper-0.9.91.5-3-x86_64.pkg.tar.gz
probably in the current directory. It may fail initially due to unsatisfied dependencies but you should be able to install them using pacman since I think all the lib32- stuff is in [Community] now.

Thanks for your advice.

Ran;
$ sudo pacman -Syu

Password: 
:: Synchronizing package databases...
 core is up to date
 extra is up to date
 community                330.8K  132.5K/s 00:00:02 [#####################] 100%
 archlinuxfr               26.2K   24.3K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
:: Replace gstreamer0.10-alsa with extra/gstreamer0.10-base-plugins? [Y/n] Y
:: Replace gstreamer0.10-cdparanoia with extra/gstreamer0.10-base-plugins? [Y/n] Y
:: Replace gstreamer0.10-vorbis with extra/gstreamer0.10-base-plugins? [Y/n] Y
:: Replace gstreamer0.10-gnomevfs with extra/gstreamer0.10-base-plugins? [Y/n] Y
:: Replace gstreamer0.10-ogg with extra/gstreamer0.10-base-plugins? [Y/n] Y
:: Replace gstreamer0.10-flac with extra/gstreamer0.10-good-plugins? [Y/n] Y
:: Replace gstreamer0.10-gconf with extra/gstreamer0.10-good-plugins? [Y/n] Y
:: Replace gnome-keyring-manager with extra/seahorse? [Y/n] Y
warning: libgnomeui: forcing upgrade to version 2.22.1-1
resolving dependencies...
looking for inter-conflicts...
:: cairo conflicts with cairo-lcd. Remove cairo-lcd? [Y/n] Y

Remove: cairo-lcd  gstreamer0.10-alsa  gstreamer0.10-cdparanoia  
        gstreamer0.10-vorbis  gstreamer0.10-gnomevfs  gstreamer0.10-ogg  
        gstreamer0.10-flac  gstreamer0.10-gconf  gnome-keyring-manager  

Total Removed Size:   3.63 MB
......

$ sudo updatedb
No complaint

$ ls nspluginwrapper/nspluginwrapper/

PKGBUILD  nspluginwrapper.install  rpmextract.sh

$ cd nspluginwrapper/nspluginwrapper

Built the package as user

$ makepkg

==> Making package: nspluginwrapper 0.9.91.5-3  (Wed Apr 16 10:13:38 HKT 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
  -> Downloading nspluginwrapper-i386-0.9.91.5-1.x86_64.rpm...
--2008-04-16 10:13:38--  http://gwenole.beauchesne.info/projects/nspluginwrapper/files/nspluginwrapper-i3
86-0.9.91.5-1.x86_64.rpm
Resolving gwenole.beauchesne.info... 88.191.25.183
Connecting to gwenole.beauchesne.info|88.191.25.183|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 52386 (51K) [application/x-rpm]
Saving to: `nspluginwrapper-i386-0.9.91.5-1.x86_64.rpm'

100%[================================================================>] 52,386      27.0K/s   in 1.9s   

2008-04-16 10:13:42 (27.0 KB/s) - `nspluginwrapper-i386-0.9.91.5-1.x86_64.rpm' saved [52386/52386]

  -> Downloading nspluginwrapper-0.9.91.5-1.x86_64.rpm...
--2008-04-16 10:13:42--  http://gwenole.beauchesne.info/projects/nspluginwrapper/files/nspluginwrapper-0.
9.91.5-1.x86_64.rpm
Resolving gwenole.beauchesne.info... 88.191.25.183
Connecting to gwenole.beauchesne.info|88.191.25.183|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 58545 (57K) [application/x-rpm]
Saving to: `nspluginwrapper-0.9.91.5-1.x86_64.rpm'

100%[================================================================>] 58,545      9.56K/s   in 6.0s   

2008-04-16 10:13:49 (9.56 KB/s) - `nspluginwrapper-0.9.91.5-1.x86_64.rpm' saved [58545/58545]

  -> Found rpmextract.sh in build dir
==> Validating source files with md5sums...
    nspluginwrapper-i386-0.9.91.5-1.x86_64.rpm ... Passed
    nspluginwrapper-0.9.91.5-1.x86_64.rpm ... Passed
    rpmextract.sh ... Passed
==> Extracting Sources...
==> Entering fakeroot environment...
==> Starting build()...
./usr/lib/nspluginwrapper/i386
./usr/lib/nspluginwrapper/i386/linux
./usr/lib/nspluginwrapper/i386/linux/libxpcom.so
./usr/lib/nspluginwrapper/i386/linux/npviewer
./usr/lib/nspluginwrapper/i386/linux/npviewer.bin
203 blocks
./usr/bin/nspluginwrapper
./usr/lib/nspluginwrapper
./usr/lib/nspluginwrapper/noarch
./usr/lib/nspluginwrapper/noarch/mkruntime
./usr/lib/nspluginwrapper/noarch/npviewer
./usr/lib/nspluginwrapper/x86_64
./usr/lib/nspluginwrapper/x86_64/linux
./usr/lib/nspluginwrapper/x86_64/linux/npconfig
./usr/lib/nspluginwrapper/x86_64/linux/npwrapper.so
./usr/lib64/mozilla/plugins/npwrapper.so
./usr/share/doc/nspluginwrapper-0.9.91.5
./usr/share/doc/nspluginwrapper-0.9.91.5/COPYING
./usr/share/doc/nspluginwrapper-0.9.91.5/NEWS
./usr/share/doc/nspluginwrapper-0.9.91.5/README
251 blocks
==> Tidying install...
  -> Removing info/doc files...
  -> Compressing man pages...
  -> Stripping debugging symbols from binaries and libraries...
==> Creating package...
  -> Generating .PKGINFO file...
  -> Adding install script...
  -> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: nspluginwrapper (Wed Apr 16 10:13:50 HKT 2008)

This time NO complaint.

$ ls

PKGBUILD                               nspluginwrapper-i386-0.9.91.5-1.x86_64.rpm  pkg            src
nspluginwrapper-0.9.91.5-1.x86_64.rpm  nspluginwrapper.install                     rpmextract.sh

But

nspluginwrapper-0.9.91.5-3-x86_64.pkg.tar.gz

can't be found

I can't find 'alien' and 'dpkg' on repo. With them I can convert .rpm package to .deb package and install the later with with dpkg. Or is there any way on Archlinux?

Any suggestion? TIA

B.R.
satimis

satimis · 2008-04-16 03:13:56

theringmaster wrote:

OR you could try gnash. It has a native x64 port, but it is only compatible with up to flash 7 or8

Hi theringmaster,

Whether you meant;

Gnash Flash
http://www.gnu.org/software/gnash/

gnash-common 0.8.2-2
http://www.archlinux.org/packages/15148/

???

If I can't find a solution here I'll try the way working on Fedora first. The method worked on Ubuntu 7.04.

B.R.
satimis

peart · 2008-04-16 03:14:33

When you build your own package, you have to install it with "pacman -U /path/to/nspluginwrapper-0.9.91.5-3-x86_64.pkg.tar.gz".

Last edited by peart (2008-04-16 03:16:48)

satimis · 2008-04-16 03:58:32

Hi folks,

Problem is partially solved.

$ sudo find / -name *x86_64.pkg.tar.gz | grep nspluginwrapper

/var/abs/local/nspluginwrapper-0.9.91.5-3-x86_64.pkg.tar.gz

I recall

$ cat /etc/abs/abs.conf | grep -i absroot

[ "$ABSROOT" = "" ] && ABSROOT="/var/abs/"

$ su
Password:

# pacman -U nspluginwrapper-0.9.91.5-3-x86_64.pkg.tar.gz

loading package data...
checking dependencies...
(1/1) checking for file conflicts                   [############################] 100%
(1/1) installing nspluginwrapper                    [############################] 100%
flash9 can be obtained with nspluginwrapper-flash -package
flash7 with nspluginwrapper-flash-7
install lib32-alsa-lib from [community] to get flash9/alsa work
Konqueror users need to add $HOME/.mozilla/plugins/ to konqueror plugins path

$ ls -al | grep seamonkey
No printout

$ sudo find / -name plugins -type d | grep seamonkey

/usr/lib/seamonkey-1.1.6/plugins

Seamonkey plugins is there.

What shall I do? Create an empty director with;

$ mkdir -R .seamonkey/plugins

???

B.R.
satimis

peart · 2008-04-16 04:28:02

Now that you have the plugin wrapper, you need to get the plugin itself. It's in the AUR, and it's called nspluginwrapper-flash. Just build it with makepkg and install it with pacman. Note that it has a few dependencies that you may not have installed yet. You will have to take care of those first.

satimis · 2008-04-16 06:08:30

peart wrote:

Now that you have the plugin wrapper, you need to get the plugin itself. It's in the AUR, and it's called nspluginwrapper-flash. Just build it with makepkg and install it with pacman. Note that it has a few dependencies that you may not have installed yet. You will have to take care of those first.

Ok, thanks

Continued

$ mkdir nspluginwrapper_flash
$ cd nspluginwrapper_flash/

download "nspluginwrapper-flash"

$ tar zxpf nspluginwrapper-flash

$ ls

nspluginwrapper-flash  nspluginwrapper-flash.tar.gz

$ cd nspluginwrapper-flash/

$ makepkg

==> Making package: nspluginwrapper-flash 9.0.115.0-2  (Wed Apr 16 13:58:19 HKT 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
  -> Found install_flash_player_9_linux.tar.gz in build dir
  -> Found adobe_eula.txt in build dir
==> Validating source files with md5sums...
    install_flash_player_9_linux.tar.gz ... FAILED
    adobe_eula.txt ... Passed
==> ERROR: One or more files did not pass the validity check!

Failed. No indication on shortage of dependencies

B.R.
satimis

peart · 2008-04-16 17:13:44

Satimis,

Look at the top comment on the package's AUR page (written by imachine): http://aur.archlinux.org/packages.php?ID=6232 . There is a new PKGBUILD in the comment. Replace your PKGBUILD with that, and makepkg should work.

Looks like the plugin was updated but it's maintainer hasn't uploaded a new PKGBUILD yet.

satimis · 2008-04-17 05:44:44

peart wrote:

Satimis,
Look at the top comment on the package's AUR page (written by imachine): http://aur.archlinux.org/packages.php?ID=6232 . There is a new PKGBUILD in the comment. Replace your PKGBUILD with that, and makepkg should work.
Looks like the plugin was updated but it's maintainer hasn't uploaded a new PKGBUILD yet.

Hi peart,

Thanks for your advice.

Continued:-

$ cd nspluginwrapper_flash/nspluginwrapper-flash/

$ mv PKGBUILD PKGBUILD.OLD

$ nano PKGBUILD
copy following script on it

# Flash for nsplauginwrapper
# 9.0.124.0 seems to have some serious security issues.
# Eg a mini flash game on browser on another workspace is still receiving keystrokes
# even when I'm on another writing this message.
# This also seems to apply on 9.0.48.0 WTF!!!!
 
pkgname=nspluginwrapper-flash
pkgver=9.0.124.0
pkgrel=1
pkgdesc="32bit browserplugins for arch64 and nspluginwrapper - flash9-plugin"
url="http://www.macromedia.com/software/flashplayer/"
license="custom"
conflicts=('nspluginwrapper-flash-7' 'nspluginwrapper-flash-beta')
depends=('lib32-alsa-lib' 'nspluginwrapper' 'lib32-libxdamage')
arch=('x86_64')
install=('plugin.install')
source=('http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_9_linux.tar.gz' 'adobe_eula.txt')
md5sums=('a311fd97aa6c214f63dc089a20cf7a39' '7d8638844b8be3e841ff29e0162577cb')

build () {
cd $startdir/pkg
install -D -m755 $startdir/src/install_flash_player_9_linux/libflashplayer.so $startdir/pkg/usr/lib/mozilla/plugins/libflashplayer.so
install -D -m644 $startdir/src/adobe_eula.txt $startdir/pkg/usr/share/licenses/$pkgname/LICENSE || return 1
}

$ makepkg

==> Making package: nspluginwrapper-flash 9.0.124.0-1  (Thu Apr 17 12:14:09 HKT 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
  -> Found install_flash_player_9_linux.tar.gz in build dir
  -> Found adobe_eula.txt in build dir
==> Validating source files with md5sums...
    install_flash_player_9_linux.tar.gz ... Passed
    adobe_eula.txt ... Passed
==> Extracting Sources...
  -> bsdtar -x -f install_flash_player_9_linux.tar.gz
==> Entering fakeroot environment...
==> Starting build()...
==> Tidying install...
  -> Removing info/doc files...
  -> Compressing man pages...
  -> Stripping debugging symbols from binaries and libraries...
==> Creating package...
  -> Generating .PKGINFO file...
  -> Adding install script...
  -> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: nspluginwrapper-flash (Thu Apr 17 12:14:12 HKT 2008)

Done

$ cd /var/abs/local/
$ su
Password

# pacman -U nspluginwrapper-flash-9.0.124.0-1-x86_64.pkg.tar.gz

loading package data...
checking dependencies...
(1/1) checking for file conflicts                   [########################################################] 100%
(1/1) installing nspluginwrapper-flash              [########################################################] 100%
Run nspluginwrapper -v -a -i for automatic detection (/root/.mozilla/plugins directory must exist)

$ ls -al ~/.mozilla

total 24
drwx------  4 satimis satimis 4096 2008-04-02 14:08 .
drwxr-xr-x 47 satimis satimis 4096 2008-04-17 12:07 ..
-rw-r--r--  1 satimis satimis 1045 2008-04-16 21:44 appreg
drwx------  4 satimis satimis 4096 2008-04-16 21:44 default
-rw-------  1 satimis satimis 3690 2008-04-16 12:40 pluginreg.dat
drwxr-xr-x  2 satimis satimis 4096 2008-04-02 00:08 plugins

Mozilla plugins exists already.

But I'm running Seamonkey

$ ls -al ~/.seamonkey

ls: cannot access /home/satimis/.seamonkey: No such file or directory

$ sudo find / -name seamonkey -type d

Password: 
/var/abs/extra/network/seamonkey

$ ls /var/abs/extra/network/seamonkey/

PKGBUILD                                 firefox-nopangoxft.patch
firefox-1.5-new-gtkim.patch              firefox-visibility.patch
firefox-1.5-pango-cursor-position.patch  launcher.patch
firefox-1.5-pango-justified-range.patch  moz252436.patch
firefox-1.5-pango-mathml.patch           moz310924.patch
firefox-1.5-pango-underline.patch        moz312241.patch
firefox-1.5-with-system-nss.patch        moz325644.patch
firefox-1.5-xft-rangewidth.patch         mozconfig
firefox-2.0-add-ldflags.patch            mozilla-firefox-2.0.0.6-fixgtk212.patch
firefox-2.0-pango-ligatures.patch        seamonkey.desktop

Nothing found.

Whether I need to create;
~/.seamonkey/plugins
???

The directories created will be empty. Besides the command "nspluginwrapper -v -a -i" will look for "~/.mozilla/plugins"

Any suggestion? Or just use ~/.mozilla/plugins ? TIA

B.R.
satimis

Last edited by satimis (2008-04-17 05:45:45)

peart · 2008-04-17 15:13:10

Hello Satimis,

Seamonkey uses ~/.mozilla. If you run the command "nspluginwrapper -v -a -i", as pacman suggests you do, then the plugin should just work. The command must be run as your regular user, with seamonkey closed.

If that doesn't work, I'm afraid I don't know what's wrong...

satimis · 2008-04-18 02:53:51

peart wrote:

Hello Satimis,
Seamonkey uses ~/.mozilla. If you run the command "nspluginwrapper -v -a -i", as pacman suggests you do, then the plugin should just work. The command must be run as your regular user, with seamonkey closed.
If that doesn't work, I'm afraid I don't know what's wrong...

Hi peart,

It seems not necessary installing Flash Player on Seamonkey.

$ nspluginwrapper -v -a -i

Auto-install plugins from /usr/lib/mozilla/plugins
Looking for plugins in /usr/lib/mozilla/plugins
*** NSPlugin Viewer  *** ERROR: /usr/lib/mozilla/plugins/libnpsoplugin.so: wrong
 ELF class: ELFCLASS64
Install plugin /usr/lib/mozilla/plugins/libflashplayer.so
  into /home/satimis/.mozilla/plugins/npwrapper.libflashplayer.so
Auto-install plugins from /usr/lib/seamonkey/plugins
Looking for plugins in /usr/lib/seamonkey/plugins
*** NSPlugin Viewer  *** ERROR: /usr/lib/seamonkey/plugins/libunixprintplugin.so
: wrong ELF class: ELFCLASS64
*** NSPlugin Viewer  *** ERROR: /usr/lib/seamonkey/plugins/libnullplugin.so: wro
ng ELF class: ELFCLASS64
Auto-install plugins from /home/satimis/.mozilla/plugins
Looking for plugins in /home/satimis/.mozilla/plugins
*** NSPlugin Viewer  *** ERROR: /home/satimis/.mozilla/plugins/libnpsoplugin.so:
 wrong ELF class: ELFCLASS64

Wong ELF classs. Fail.

Start Seamonkey and visit

Test Adobe Shockwave & Flash Players
www.adobe.com/shockwave/welcome

Flash Player works. Adobe Shockwave Player doesn't work.

Where can I find the Shockwave Player for 64bit Archlinux? Can I install MPlayer instead?

B.R.
satimis

peart · 2008-04-18 04:04:02

The ELF stuff is your 32-bit wrapper trying to cope with 64-bit plugins. No cause for concern... I think.

There is cause for concern for the Shockwave (Director) plugin. On Linux, it simply does not exist. I just googled around, and found nothing in LinuxLand that understands Shockwave.

satimis · 2008-04-18 16:05:46

peart wrote:

The ELF stuff is your 32-bit wrapper trying to cope with 64-bit plugins. No cause for concern... I think.
There is cause for concern for the Shockwave (Director) plugin. On Linux, it simply does not exist. I just googled around, and found nothing in LinuxLand that understands Shockwave.

Hi peart,

This guide "Fedora Core 6 Up and Running Part 2"
http://www.my-guides.net/en/content/view/26/26/

worked for me previously on Fedora. Both Flash and Shockwave worked. Unfortunately I can't find those packages on repo here. I can't test it here.

satimis

peart · 2008-04-18 16:21:51

Interesting. Even Adobe itself says there was never a Shockwave plugin for Linux. I'll check the my-guides link in your post. It's on the todo list for the weekend.

Ciao,
me.

Arch Linux

#1 2008-04-09 12:02:15

About Adobe Flash Player and Adobe Reader

#2 2008-04-09 12:37:13

Re: About Adobe Flash Player and Adobe Reader

#3 2008-04-14 02:45:03

Re: About Adobe Flash Player and Adobe Reader

#4 2008-04-14 14:35:26

Re: About Adobe Flash Player and Adobe Reader

#5 2008-04-15 16:46:08

Re: About Adobe Flash Player and Adobe Reader

#6 2008-04-15 19:14:26

Re: About Adobe Flash Player and Adobe Reader

#7 2008-04-15 19:16:04

Re: About Adobe Flash Player and Adobe Reader

#8 2008-04-16 02:59:18

Re: About Adobe Flash Player and Adobe Reader

#9 2008-04-16 03:13:56

Re: About Adobe Flash Player and Adobe Reader

#10 2008-04-16 03:14:33

Re: About Adobe Flash Player and Adobe Reader

#11 2008-04-16 03:58:32

Re: About Adobe Flash Player and Adobe Reader

#12 2008-04-16 04:28:02

Re: About Adobe Flash Player and Adobe Reader

#13 2008-04-16 06:08:30

Re: About Adobe Flash Player and Adobe Reader

#14 2008-04-16 17:13:44

Re: About Adobe Flash Player and Adobe Reader

#15 2008-04-17 05:44:44

Re: About Adobe Flash Player and Adobe Reader

#16 2008-04-17 15:13:10

Re: About Adobe Flash Player and Adobe Reader

#17 2008-04-18 02:53:51

Re: About Adobe Flash Player and Adobe Reader

#18 2008-04-18 04:04:02

Re: About Adobe Flash Player and Adobe Reader

#19 2008-04-18 16:05:46

Re: About Adobe Flash Player and Adobe Reader

#20 2008-04-18 16:21:51

Re: About Adobe Flash Player and Adobe Reader

Board footer