You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2008-05-03 18:13:27
- inXistant
- Member
- From: Montreal, Canada
- Registered: 2008-04-11
- Posts: 51
- Website
Ramdom freezes
Hi all,
Well... That's it... I get random freezes every week or so. Here are a few infos:
I'm on a HP tx1420 ca
3 gigs of ram
AMD Turion X2 2.3 Gz per core
kernel 2.6.25-1
nvidia [EDIT:] WAS: 169.12-3 IS: 173.08 [/EDIT]
This does not occur at any time in particular i.e. I do not do anything in particular that could cause the freeze.
Querying my logs via
grep /var/log/* | grep [time of the freeze]or time of the freeze -1 or -2 minutes do not show *anything*.
Finally, here is the output of dmesg
Linux version 2.6.25-ARCH (root@architect) (gcc version 4.3.0 (GCC) ) #1 SMP PREEMPT Sat Apr 19 15:39:26 CEST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000b7f00000 (usable)
BIOS-e820: 00000000b7f00000 - 00000000b7f14000 (ACPI data)
BIOS-e820: 00000000b7f14000 - 00000000b7f80000 (ACPI NVS)
BIOS-e820: 00000000b7f80000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
2047MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f8a00] 000f8a00
Entering add_active_range(0, 0, 753408) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 753408
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 753408
On node 0 totalpages: 753408
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 4094 pages used for memmap
HighMem zone: 519938 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
HP Pavilion tx1000: using 0xed I/O delay port
ACPI: RSDP 000F8940, 0014 (r0 HP )
ACPI: RSDT B7F0ADB5, 0040 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
ACPI: FACP B7F13A92, 0074 (r1 HP MCP51M 6040000 PTL_ F4240)
ACPI: DSDT B7F0ADF5, 8C9D (r1 HP MCP51M 6040000 MSFT 3000000)
ACPI: FACS B7F14FC0, 0040
ACPI: SSDT B7F13B06, 028A (r1 HP POWERNOW 6040000 LTP 1)
ACPI: MCFG B7F13D90, 003C (r1 HP MCFG 6040000 LTP 0)
ACPI: HPET B7F13DCC, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
ACPI: APIC B7F13E04, 005E (r1 HP APIC 6040000 LTP 0)
ACPI: BOOT B7F13E62, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1)
ACPI: SLIC B7F13E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1)
ACPI: DMI detected: Hewlett-Packard
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:8 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:8 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 747522
Kernel command line: root=/dev/sda3 resume=/dev/sda6 vga=773 quiet
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2293.854 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2983280k/3013632k available (2075k kernel code, 29112k reserved, 712k data, 268k init, 2096128k highmem)
virtual kernel memory layout:
fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc03bf000 - 0xc0402000 ( 268 kB)
.data : 0xc0306cf8 - 0xc03b8e80 ( 712 kB)
.text : 0xc0100000 - 0xc0306cf8 (2075 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 4592.10 BogoMIPS (lpj=7651366)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-66 stepping 01
Booting processor 1/1 ip 4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4589.84 BogoMIPS (lpj=7646153)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
AMD C1E detected late. Force timer broadcast.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-66 stepping 01
Total of 2 processors activated (9182.94 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 2 CPUs
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:10.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK1E] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 20 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *10
ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 20 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 20 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 20 22 23) *11
ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 20 22 23) *11
ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 20 22 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 20 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 20 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 20 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 20 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 20 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 21) *5
ACPI: PCI Interrupt Link [LSI1] (IRQs 21) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 0
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:01: iomem range 0xfed00000-0xfed00fff has been reserved
system 00:03: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1080-0x10ff has been reserved
system 00:04: ioport range 0x1400-0x147f has been reserved
system 00:04: ioport range 0x1480-0x14ff has been reserved
system 00:04: ioport range 0x1800-0x187f has been reserved
system 00:04: ioport range 0x1880-0x18ff has been reserved
system 00:04: ioport range 0x2000-0x203f has been reserved
system 00:05: ioport range 0x360-0x361 has been reserved
system 00:05: ioport range 0x380-0x383 has been reserved
system 00:05: ioport range 0x4d0-0x4d1 has been reserved
PCI: Bridge: 0000:00:02.0
IO window: 4000-4fff
MEM window: 0xc4000000-0xc7ffffff
PREFETCH window: 0x00000000c9000000-0x00000000c91fffff
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: 0xc8000000-0xc8ffffff
PREFETCH window: 0x00000000c9200000-0x00000000c93fffff
PCI: Bridge: 0000:00:10.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:10.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 694k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:05.0: Boot video device
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie03]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie03]
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 131072k
vesafb: mode is 1024x768x8, linelength=1024, pages=3
vesafb: protected mode interface info at c000:d750
vesafb: pmi: set display start = c00cd786, set palette = c00cd7f0
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 268k freed
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 21 (level, high) -> IRQ 21
PCI: Setting latency timer of device 0000:00:0e.0 to 64
ACPI: PCI interrupt for device 0000:00:0e.0 disabled
pata_amd 0000:00:0d.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:0d.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
ata1.00: ATAPI: TSSTcorpCD/DVDW TS-L632M, 0A17, max MWDMA2
ata1: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
ata1.00: configured for MWDMA2
ata2: port disabled. ignoring.
scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632M 0A17 PQ: 0 ANSI: 5
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 21 (level, high) -> IRQ 21
PCI: Setting latency timer of device 0000:00:0e.0 to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 21
ata4: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 21
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-8: WDC WD2500BEVS-60UST0, 01.01A01, max UDMA/100
ata3.00: 488397168 sectors, multi 16: LBA48
ata3.00: configured for UDMA/100
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA WDC WD2500BEVS-6 01.0 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 23 (level, high) -> IRQ 23
PCI: Setting latency timer of device 0000:00:0b.0 to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0b.0: irq 23, io mem 0xc0004000
sda1 sda3 sda4 < sda5sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0b.1[b] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0b.1 to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0b.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:0b.1
ehci_hcd 0000:00:0b.1: irq 22, io mem 0xc0005000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
PM: Starting manual resume from disk
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
usb 2-2: new high speed USB device using ehci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
usb 2-2.1: new high speed USB device using ehci_hcd and address 4
usb 2-2.1: configuration #1 chosen from 1 choice
usb 2-2.2: new full speed USB device using ehci_hcd and address 5
usb 2-2.2: configuration #1 chosen from 1 choice
usb 2-2.3: new full speed USB device using ehci_hcd and address 6
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: ACPI0007:01 is registered as cooling_device1
powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-66 processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xf (2300 MHz), vid 0x11
powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x12
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x13
powernow-k8: 3 : fid 0xa (1800 MHz), vid 0x14
powernow-k8: 4 : fid 0x8 (1600 MHz), vid 0x15
powernow-k8: 5 : fid 0x0 (800 MHz), vid 0x1e
usb 2-2.3: configuration #1 chosen from 1 choice
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 20 (level, high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:14.0 to 64
usb 1-7: new full speed USB device using ohci_hcd and address 2
usb 1-7: configuration #1 chosen from 1 choice
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:0a:22:cb
forcedeth 0000:00:14.0: highdma pwrctl timirq gbit lnktim desc-v3
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
ACPI: PCI Interrupt 0000:00:10.1[b] -> Link [LAZA] -> GSI 17 (level, high) -> IRQ 17
PCI: Setting latency timer of device 0000:00:10.1 to 64
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [LID]
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (61 C)
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
ACPI: WMI: Mapper loaded
ACPI: \_SB_.PCI0.IDE0.PRI0.MAST: found ejectable bay
ACPI: \_SB_.PCI0.IDE0.PRI0.MAST: Adding notify handler
ACPI: Error installing bay notify handler
ACPI: Bay [\_SB_.PCI0.IDE0.PRI0.MAST] Added
ndiswrapper version 1.52 loaded (smp=yes, preempt=yes)
ACPI: device:2d is registered as cooling_device2
input: Video Bus as /class/input/input6
ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
Linux agpgart interface v0.103
input: Video Bus as /class/input/input7
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Linux video capture interface: v2.00
ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 19
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 19 (level, high) -> IRQ 19
PCI: Setting latency timer of device 0000:03:00.0 to 64
ndiswrapper: using IRQ 19
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
input: USB 2.0 Camera as /class/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r203)
wlan0: ethernet device 00:1a:73:f2:7a:d1 using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4328.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LK3E] -> GSI 18 (level, high) -> IRQ 18
PCI: Setting latency timer of device 0000:00:05.0 to 64
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
usbcore: registered new interface driver ndiswrapper
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3220992k swap on /dev/sda6. Priority:-1 extents:1 across:3220992k
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input9
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
Clocksource tsc unstable (delta = -151988503 ns)The latter being a bit too kabalistic for me to read, if anybody have a clue...
So, I guess that if dmesg has nothing wrong in it, it just remains to ask you guys if there is any way to make the logs more verbose...
Thanks
Last edited by inXistant (2008-05-03 18:48:58)
Nothing is sacred
Offline
#2 2008-05-03 18:32:42
- inXistant
- Member
- From: Montreal, Canada
- Registered: 2008-04-11
- Posts: 51
- Website
Re: Ramdom freezes
NOTA: These are hard freezes. Can't ctrl-alt-backspace to kill X or ctrl-alt-Fx to go in console...
Nothing is sacred
Offline
#3 2008-05-03 18:38:34
- skymt
- Member
- Registered: 2006-11-27
- Posts: 443
Re: Ramdom freezes
Since you're running 2.6.15, you need the latest beta Nvidia driver (AUR).
Offline
#4 2008-05-03 18:47:08
- inXistant
- Member
- From: Montreal, Canada
- Registered: 2008-04-11
- Posts: 51
- Website
Re: Ramdom freezes
Thanks. Did the update. However, the 169.12-3 (and not *-2) where the first NVIDIA drivers-beta out for the 2.6.25 kernel...
Nothing is sacred
Offline
Pages: 1