Yaourt troubles

halcor · 2008-05-17 00:50:36

I try to install some packages from AUR of yaourt and...

I can't
the first is: siag-office
And the error was:

==> ERROR Fallo Build()
Abortando...
Error: Makepkg was unable to build siag-office package

The second is: thinkfree-office
And the error was:

error: varios paquetes proveen j2re, por favor especifique uno :
jre icedtea6
Pacman falló al instalar las dependecias faltantes
Error: Makepkg was unable to build siag-office package

English: Some packages give us j2re, please choose one of them:
jre icedtea6
Pacman fails to install the depencies

The Third is: omnibook
And the error was:

fallo mientras se descargaba omnibook-2.20070211.tar.gz
Abortando...
Error: Makepkg was unable to build siag-office package

""Fails when omnibook 2.xx was downloading""

The 4º is: omnibook-svn
And the error was:

Fallo build()
Abortando...
Error: Makepkg was unable to build siag-office package

Before i can Install: emesene and wxmaxima

Can you help me?

lldmer · 2008-05-17 01:17:40

I think for thinkfree-office you need a java-enviroment. The installer doesn't install one automatically 'cause you can chose between two java-enviroments (jre and icedtea). If I'm right (and sometimes I am), Icedtea is opensource, and jre is not and comes from Sun. Try installing one of these (jre or icedtea) and try again.

As for omnibook: maybe the link to the package (from the PKGBUILD), isn't working anymore. Try if you can find the package at the location specified in the PKGBUILD (in firefox for example) (do not forget to replace $pkg_ver etc in the url from the PKGBUILD when trying in your browser).

Did you install anything from yaourt before? Otherwise it's possible you don't have some essential tools to build packages installed. Yaourt needs make for example. If yaourt can't find make however, or maybe some other program it needs, it should tell you in the output.

Hope this helps.

Last edited by lldmer (2008-05-17 01:22:44)

halcor · 2008-05-19 14:43:41

When i try to install yaourt I get it See black letters, there three logs, please if you only want to see one of them, try the third, I think that the balck letter in it could be the trouble. Thanks everybody!

ricardo ~  $  yaourt -S siag-office

==> Downloading siag-office PKGBUILD from AUR...


Comment by: pressh on 20080127 [13:51:48]
moved from [community]

      First Submitted: Sun, 27 Jan 2008 13:51:48 +0000
      Last Updated: (unknown)
siag-office 3.6.1-4 (Unsupported): Siag Office is a tightly integrated, free office package

==> siag-office dependencies:
 - mowitz (already installed)
 - termcap-compat (already installed)
 - libxpm (already installed)
 - nextaw (already installed)
==>  Edit the PKGBUILD (recommended) ? [Y/n] ("A" to abort)
==>   ----------------------------------------------
==>n

==>  Continue the building of 'siag-office'? [Y/n]
==>   ----------------------------------------------
==>y



==> Building and installing package
==> Creando el paquete: siag-office 3.6.1-4  (lun may 19 16:27:37 UTC 2008)
==> Comprobando Dependencias en tiempo de ejecución... 
==> comprobando dependencias en tiempo de compilación... 
==> Obteniendo Fuentes...
  -> Descargando siag-3.6.1.tar.gz... 
--2008-05-19 16:27:38--  ftp://siag.nu/pub/siag/siag-3.6.1.tar.gz
           => `siag-3.6.1.tar.gz'
Resolviendo siag.nu... 217.151.192.87
Connecting to siag.nu|217.151.192.87|:21... conectado.
Identificándose como anonymous ... ¡Dentro!
==> SYST ... hecho.   ==> PWD ... hecho.
==> TYPE I ... hecho.  ==> CWD /pub/siag ... hecho.
==> SIZE siag-3.6.1.tar.gz ... 1526023
==> PASV ... hecho.   ==> RETR siag-3.6.1.tar.gz ... hecho.
Longitud: 1526023 (1,5M)

100%[======================================>] 1.526.023    311K/s   in 5,1s    

2008-05-19 16:27:46 (292 KB/s) - `siag-3.6.1.tar.gz' saved [1526023]

  -> Encontrado Makefile.patch en el directorio de compilación
  -> Encontrado kdeinst.patch en el directorio de compilación
==> Validando el archivo fuente con md5sums...
    siag-3.6.1.tar.gz ... Pasado
    Makefile.patch ... Pasado
    kdeinst.patch ... Pasado
==> Descomprimiendo fuentes...
  -> bsdtar -x -f siag-3.6.1.tar.gz
==> entrando a fakeroot...
==> comenzando build()...
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking whether make sets $(MAKE)... yes
checking for working aclocal-1.4... missing
checking for working autoconf... missing
checking for working automake-1.4... missing
checking for working autoheader... missing
checking for working makeinfo... missing
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for a BSD-compatible install... /bin/install -c
checking whether ln -s works... yes
checking for ranlib... ranlib
checking for strerror in -lcposix... no
checking how to run the C preprocessor... gcc -E
checking for X... libraries , headers in standard search path
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking whether sys/types.h defines makedev... yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for struct stat.st_blocks... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for unsigned char... yes
checking size of unsigned char... 1
checking for unsigned short... yes
checking size of unsigned short... 2
checking for unsigned int... yes
checking size of unsigned int... 4
checking for unsigned long... yes
checking size of unsigned long... 4
checking for unsigned long long... yes
checking size of unsigned long long... 8
checking for float... yes
checking size of float... 4
checking for double... yes
checking size of double... 8
checking for long double... yes
checking size of long double... 12
checking whether byte ordering is bigendian... no
checking whether getpgrp requires zero arguments... yes
checking for working memcmp... yes
checking return type of signal handlers... void
checking for strftime... yes
checking whether utime accepts a null argument... yes
checking for vprintf... yes
checking for _doprnt... no
checking for getcwd... yes
checking for gethostname... yes
checking for gettimeofday... yes
checking for mkdir... yes
checking for mktime... yes
checking for putenv... yes
checking for regcomp... yes
checking for rmdir... yes
checking for select... yes
checking for socket... yes
checking for strcspn... yes
checking for strdup... yes
checking for strerror... yes
checking for strspn... yes
checking for strstr... yes
checking for strtod... yes
checking for strtol... yes
checking for fnmatch... yes
checking for main in -lm... yes
checking for acosh... yes
checking for asinh... yes
checking for log1p... yes
checking for expm1... yes
checking for cbrt... yes
checking for drem... yes
checking for atanh... yes
checking for main in -lcrypt... yes
checking for main in -lnsl... yes
checking for connect in -lsocket... no
checking sys/mode.h usability... no
checking sys/mode.h presence... no
checking for sys/mode.h... no
checking fnmatch.h usability... yes
checking fnmatch.h presence... yes
checking for fnmatch.h... yes
checking crypt.h usability... yes
checking crypt.h presence... yes
checking for crypt.h... yes
checking sys/mkdev.h usability... no
checking sys/mkdev.h presence... no
checking for sys/mkdev.h... no
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for setpwfile... no
checking for getrlimit... yes
checking for getrusage... yes
checking for fnmatch... (cached) yes
checking for usleep... yes
checking for lchown... yes
checking for strptime... yes
checking for putpwent... yes
checking for getwd... yes
checking for main in -lXext... yes
checking for main in -lXmu... yes
checking for XCreateIC in -lX11... yes
checking for main in -lXpm... yes
checking for main in -lneXtaw... yes
checking for main in -lMowitz... yes
checking for vsnprintf... yes
checking for main in -ltermcap... yes
checking for wgetch in -lncurses... yes
checking for resizeterm... yes
checking for beep... yes
checking for immedok... yes
checking for keypad... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating siod/Makefile
config.status: creating siod/docs/Makefile
config.status: creating cole/Makefile
config.status: creating stocks/Makefile
config.status: creating common/Makefile
config.status: creating common/docs/Makefile
config.status: creating common/bitmaps/Makefile
config.status: creating common/bitmaps/kde/Makefile
config.status: creating common/bitmaps/kde2/Makefile
config.status: creating common/bitmaps/gnome/Makefile
config.status: creating common/bitmaps/ms/Makefile
config.status: creating common/themes/Makefile
config.status: creating xcommon/Makefile
config.status: creating siag/Makefile
config.status: creating siag/docs/Makefile
config.status: creating siag/examples/Makefile
config.status: creating xsiag/Makefile
config.status: creating tsiag/Makefile
config.status: creating pw/Makefile
config.status: creating pw/docs/Makefile
config.status: creating pw/examples/Makefile
config.status: creating xpw/Makefile
config.status: creating egon/Makefile
config.status: creating egon/docs/Makefile
config.status: creating egon/examples/Makefile
config.status: creating xegon/Makefile
config.status: creating plugins/Makefile
config.status: creating xed/Makefile
config.status: creating xfiler/Makefile
config.status: creating xfiler/pixmaps/Makefile
config.status: creating xfiler/bitmaps/Makefile
config.status: creating o3read/Makefile
config.status: creating gvu/Makefile
config.status: creating config.h
config.status: executing default-1 commands
[b]./PKGBUILD: line 18: patch: command not found[/b]
==> ERROR: Fallo build()
    Abortando...
Error: Makepkg was unable to build siag-office package.

ricardo ~  $

When I try to install omnibook. (If the other office works with jre I'm not interested in.

ricardo ~  $  yaourt -Sy omnibook
Contraseña:
:: Sincronizando las bases de datos de paquetes...
 core está actualizado
 extra está actualizado
 community                338,6K  179,2K/s 00:00:02 [#####################] 100%
 archlinuxfr está actualizado
la base de datos local está actualizada

==> Downloading omnibook PKGBUILD from AUR...

==> Last 5 comments ordered by date (asc):

Comment by: kastor on 20060922 [01:01:11]
Project Homepage fix

Comment by: kastor on 20070410 [19:51:57]
New Version

Comment by: kastor on 20070430 [13:09:45]
for new stock kernel

Comment by: kastor on 20070515 [13:43:25]
PKGBUILD fixes.

Comment by: kastor on 20070910 [23:38:27]
i don't have this hardware any more, i can't test it

      First Submitted: Fri, 22 Sep 2006 00:54:45 +0000
      Last Updated: Tue, 15 May 2007 13:43:25 +0000
omnibook 2.20070211-3 (Unsupported): Kernel module for HP OmniBook,Pavilion,Toshiba and Compal ACL00 laptops

==> omnibook dependencies:
 - glibc (already installed)
==>  Edit the PKGBUILD (recommended) ? [Y/n] ("A" to abort)
==>   ----------------------------------------------
==>n


==> WARNING: This PKGBUILD contains install file that can be dangerous.
omnibook.install
==>  Edit omnibook.install (recommended) ? [Y/n] ("A" to abort)
==>   ----------------------------------------------
==>n

==>  Continue the building of 'omnibook'? [Y/n]
==>   ----------------------------------------------
==>y



==> Building and installing package
==> Creando el paquete: omnibook 2.20070211-3  (lun may 19 16:36:07 UTC 2008)
==> Comprobando Dependencias en tiempo de ejecución... 
==> comprobando dependencias en tiempo de compilación... 
==> Obteniendo Fuentes...
  -> Descargando omnibook-2.20070211.tar.gz... 
--2008-05-19 16:36:08--  http://osdn.dl.sourceforge.net/sourceforge/omnibook/omnibook-2.20070211.tar.gz
Resolviendo osdn.dl.sourceforge.net... 216.34.181.56
Connecting to osdn.dl.sourceforge.net|216.34.181.56|:80... conectado.
Petición HTTP enviada, esperando respuesta... 404 Not Found
2008-05-19 16:36:09 ERROR 404: Not Found.

==> ERROR: Fallo mientras se descargaba omnibook-2.20070211.tar.gz
    Abortando...
Error: Makepkg was unable to build omnibook package.

When I try to install omnibook-svn I get this:

ricardo ~  $  yaourt -Sy omnibook-svn
:: Sincronizando las bases de datos de paquetes...
 core está actualizado
 extra está actualizado
 community está actualizado
 archlinuxfr está actualizado
la base de datos local está actualizada

==> Downloading omnibook-svn PKGBUILD from AUR...


Comment by: exbyte on 20071114 [00:38:00]
I am adopt this packeges, because i have hp omnibook 6000, use this module
Bruno Aleci

      First Submitted: Mon, 25 Sep 2006 23:44:10 +0000
      Last Updated: Wed, 14 Nov 2007 16:49:00 +0000
omnibook-svn 268-1 (Unsupported): Kernel module for HP OmniBook,Pavilion,Toshiba and Compal ACL00 laptops

==> omnibook-svn dependencies:
 - kernel26 (already installed)
 - subversion (already installed)
==>  Edit the PKGBUILD (recommended) ? [Y/n] ("A" to abort)
==>   ----------------------------------------------
==>n


==> WARNING: This PKGBUILD contains install file that can be dangerous.
omnibook.install
==>  Edit omnibook.install (recommended) ? [Y/n] ("A" to abort)
==>   ----------------------------------------------
==>n

==>  Continue the building of 'omnibook-svn'? [Y/n]
==>   ----------------------------------------------
==>y



[b]==> Building and installing package
mkdir: no se puede crear el directorio «/var/abs»: Permiso denegado
==> WARNING: Unable to write in /var/abs/local/yaourtbuild/omnibook-svn directory. Using /tmp directory
==> Determinando última revisión de svn...[/b]
  -> Versión encontrada: 274
==> Creando el paquete: omnibook-svn 274-1  (lun may 19 16:39:40 UTC 2008)
==> Comprobando Dependencias en tiempo de ejecución... 
==> comprobando dependencias en tiempo de compilación... 
==> Obteniendo Fuentes...
==> Validando el archivo fuente con md5sums...
==> Descomprimiendo fuentes...
==> entrando a fakeroot...
==> comenzando build()...
==> Connecting to SVN server...
==> Checking out omnibook
Error validando el certificado del servidor de 'https://omnibook.svn.sourceforge.net:443':
 - El certificado no fue emitido por una autoridad marcada como
   confiable. ¡Use la "huella" para validar el certificado manualmente!
Información del certificado:
 - Nombre de máquina: *.svn.sourceforge.net
 - Válido desde Tue, 09 Oct 2007 14:15:07 GMT hasta Mon, 08 Dec 2008 15:15:07 GMT
 - Emisor: Equifax Secure Certificate Authority, Equifax, US
 - "Huella": fb:75:6c:40:58:ae:21:8c:63:dd:1b:7b:6a:7d:bb:8c:74:36:e7:8a
¿(R)echazar, aceptar (t)emporariamente o aceptar (p)ermanentemente?A    omnibook/kbc.c
A    omnibook/debian
A    omnibook/debian/control
A    omnibook/debian/compat
A    omnibook/debian/changelog
A    omnibook/debian/patches
A    omnibook/debian/patches/01_disable-debug.dpatch
A    omnibook/debian/patches/00list
A    omnibook/debian/copyright
A    omnibook/debian/docs
A    omnibook/debian/rules
A    omnibook/debian/control.modules.in
A    omnibook/debian/README.Debian
A    omnibook/hardware.h
A    omnibook/init.c
A    omnibook/laptop.h
A    omnibook/display.c
A    omnibook/nbsmi.c
A    omnibook/acpi.c
A    omnibook/dock.c
A    omnibook/fan_policy.c
A    omnibook/doc
A    omnibook/doc/BUGS
A    omnibook/doc/ChangeLog
A    omnibook/doc/COPYING
A    omnibook/doc/CREDITS
A    omnibook/doc/README
A    omnibook/blank.c
A    omnibook/cooling.c
A    omnibook/info.c
A    omnibook/Makefile
A    omnibook/temperature.c
A    omnibook/throttling.c
A    omnibook/muteled.c
A    omnibook/lcd.c
A    omnibook/polling.c
A    omnibook/fan.c
A    omnibook/bluetooth.c
A    omnibook/dump.c
A    omnibook/lib.c
A    omnibook/touchpad.c
A    omnibook/misc
A    omnibook/misc/dmi_strings.txt
A    omnibook/misc/README.mmkeys
A    omnibook/misc/mmkeys.patch
A    omnibook/misc/onetouch-xkb-2003-02-10.patch
A    omnibook/misc/hotkeys
A    omnibook/misc/hotkeys/README.hotkeys
A    omnibook/misc/hotkeys/ob5xx.def
A    omnibook/misc/hotkeys/nx9xxx.def
A    omnibook/misc/hotkeys/xt155.def
A    omnibook/misc/hotkeys/xe4xxx.def
A    omnibook/misc/hotkeys/xe3gc.def
A    omnibook/misc/hotkeys/xe3gf.def
A    omnibook/misc/omnibook-integration.patch
A    omnibook/battery.c
A    omnibook/compal.c
A    omnibook/omnibook.h
A    omnibook/ac.c
A    omnibook/hotkeys.c
A    omnibook/sections.lds
A    omnibook/pio.c
A    omnibook/ec.c
A    omnibook/compat.h
A    omnibook/wireless.c
Revisión obtenida: 274
==> SVN checkout done or server timeout
==> Starting build...
make -C /lib/modules/2.6.23-ARCH/build SUBDIRS=/tmp/yaourt-tmp-ricardo/aur-omnibook-svn/omnibook-svn/src/omnibook-build modules
make: *** /lib/modules/2.6.23-ARCH/build: No existe el fichero o el directorio.  Alto.
make: *** [omnibook.ko] Error 2
==> ERROR: Fallo build()
    Abortando...
Error: Makepkg was unable to build omnibook-svn package.

ricardo ~  $

lldmer · 2008-05-19 23:38:25

As for siag-office, you need the "patch"-program to build it with this PKGBUILD. So please install the patch(program) (with Pacman -S patch), and try again.
For the omnibook-svn, maybe you can check if the /lib/modules/2.6.23-ARCH/build-directory exists, and whether the right permissions are set.

halcor · 2008-05-20 12:44:30

I installed siag-office, thanks.

I don't have this directory, I've got a some that looks like that:

/lib/modules/2.6.24-ARCH/build/

lldmer · 2008-05-20 23:12:56

The PKGBUILD and install file are referring to a different kernel. When yaourt asks you to edit the PKGBUILD, answer yes. Then edit the first line

_kernver=2.6.23-ARCH

and change it to

_kernver=2.6.24-ARCH

.

I think you need to do the same for all reference to the old kernel in the Install file.

Arch Linux

#1 2008-05-17 00:50:36

Yaourt troubles

#2 2008-05-17 01:17:40

Re: Yaourt troubles

#3 2008-05-19 14:43:41

Re: Yaourt troubles

#4 2008-05-19 23:38:25

Re: Yaourt troubles

#5 2008-05-20 12:44:30

Re: Yaourt troubles

#6 2008-05-20 23:12:56

Re: Yaourt troubles

Board footer