You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2004-08-02 06:32:51
- hypermegachi
- Member
- Registered: 2004-07-25
- Posts: 311
lots and lots of hotplug output
i recently tried copying my arch install from one partition to another partition. i just used cp...i think it works so far, everything seems to work as before.
but i got a new problem that's annoying. hotplug during boot would display a whole lot of useless info, which it never did before. what's most disturbing is that this affects BOTH partitions old and new. so i have no clue why or how copying partitions would do this.
anywho, the output is reproducable my restarting the daemon. this is the output:
-------------------------------------------------
[1;34m:: [1;37mStarting Hotplug Daemon[1;0m [71G [1;34m[[0;36mBUSY[1;34m][1;0m ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
'
DESCRIPTION='USB Logitech USB Receiver'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/1-1
DIRSTACK=()
DISPLAY=:0.0
DRIVERS=
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
'
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Logitech USB Receiver'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=046d/c505/1700
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.2%usb1%1-1
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=16407
idVendor=4682
line=
match_flags=3
module=
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=5888
usb_idProduct=50437
usb_idVendor=1133
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
'
DESCRIPTION='USB Logitech USB Receiver'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/1-1
DIRSTACK=()
DISPLAY=:0.0
DRIVERS=' '
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
'
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Logitech USB Receiver'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=046d/c505/1700
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.2%usb1%1-1
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=17920
idVendor=2690
line=
match_flags=3
module=libusbscanner
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=5888
usb_idProduct=50437
usb_idVendor=1133
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
'
DESCRIPTION='USB Logitech USB Receiver'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/1-1
DIRSTACK=()
DISPLAY=:0.0
DRIVERS='0x00 '
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
'
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Logitech USB Receiver'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=046d/c505/1700
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.2%usb1%1-1
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=0
idVendor=0
line=
match_flags=0
module=0x00
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=5888
usb_idProduct=50437
usb_idVendor=1133
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
'
DESCRIPTION='USB Logitech USB Receiver'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/1-2
DIRSTACK=()
DISPLAY=:0.0
DRIVERS=
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
'
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Logitech USB Receiver'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=046d/c501/0910
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.2%usb1%1-2
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=16407
idVendor=4682
line=
match_flags=3
module=
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=2320
usb_idProduct=50433
usb_idVendor=1133
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
'
DESCRIPTION='USB Logitech USB Receiver'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/1-2
DIRSTACK=()
DISPLAY=:0.0
DRIVERS=' '
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
'
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Logitech USB Receiver'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=046d/c501/0910
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.2%usb1%1-2
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=17920
idVendor=2690
line=
match_flags=3
module=libusbscanner
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=2320
usb_idProduct=50433
usb_idVendor=1133
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
'
DESCRIPTION='USB Logitech USB Receiver'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/1-2
DIRSTACK=()
DISPLAY=:0.0
DRIVERS='0x00 '
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
'
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Logitech USB Receiver'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=046d/c501/0910
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.2%usb1%1-2
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=0
idVendor=0
line=
match_flags=0
module=0x00
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=2320
usb_idProduct=50433
usb_idVendor=1133
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
'
DESCRIPTION='USB Generic USB Storage Device'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/2-2
DIRSTACK=()
DISPLAY=:0.0
DRIVERS=
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
'
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Generic USB Storage Device'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=1019/0c55/0100
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.3%usb2%2-2
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=16407
idVendor=4682
line=
match_flags=3
module=
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=256
usb_idProduct=3157
usb_idVendor=4121
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
'
DESCRIPTION='USB Generic USB Storage Device'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/2-2
DIRSTACK=()
DISPLAY=:0.0
DRIVERS=' '
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
'
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Generic USB Storage Device'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=1019/0c55/0100
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.3%usb2%2-2
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=17920
idVendor=2690
line=
match_flags=3
module=libusbscanner
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=256
usb_idProduct=3157
usb_idVendor=4121
ACTION=add
BASH=/bin/sh
BASH_VERSINFO=([0]="3" [1]="00" [2]="0" [3]="1" [4]="release" [5]="i686-pc-linux-gnu")
BASH_VERSION='3.00.0(1)-release'
CLASSPATH=:/opt/j2re/lib:/opt/j2sdk/lib
COLORTERM=
COLUMNS=80
DEFAULT_IFS='
'
DESCRIPTION='USB Generic USB Storage Device'
DEVFS=/proc/bus/usb
DEVICE=
DEVPATH=bus/usb/devices/2-2
DIRSTACK=()
DISPLAY=:0.0
DRIVERS='0x00 '
EUID=0
FILENAME=/etc/hotplug/usb/libsane.usermap
FOUND=false
FUNCNAME=([0]="usb_map_modules" [1]="load_drivers" [2]="main")
GNOMEDIR=/opt/gnome
GROUPS=()
GS_LIB=/home/hypermegachi/.fonts
GTK2_RC_FILES=/etc/gtk-2.0/gtkrc:/home/hypermegachi/.gtkrc-2.0:/home/hypermegachi/.kde/share/config/gtkrc
GTK_RC_FILES=/etc/gtk/gtkrc:/home/hypermegachi/.gtkrc:/home/hypermegachi/.kde/share/config/gtkrc
HOME=/root
HOSTNAME=arch
HOSTTYPE=i686
HOTPLUG_DIR=/etc/hotplug
HUSHLOGIN=FALSE
HZ=100
IFS='
'
INPUTRC=/etc/inputrc
INTERFACE=
J2REDIR=/opt/j2re
J2SDKDIR=/opt/j2sdk
JAVA_HOME=/opt/j2sdk
KDEDIR=/opt/kde
KDE_FULL_SESSION=true
KDE_MULTIHEAD=false
KERNEL=2.6.7-optimized
KONSOLE_DCOP='DCOPRef(konsole-1988,konsole)'
KONSOLE_DCOP_SESSION='DCOPRef(konsole-1988,session-1)'
LABEL='USB Generic USB Storage Device'
LESS=-R
LESSCHARSET=latin1
LIBGLADE_MODULE_PATH=:/opt/gnome/lib/libglade/2.0
LINES=24
LISTER=
LOADED=
LOGGER=/usr/bin/logger
LOGNAME=hypermegachi
MACHTYPE=i686-pc-linux-gnu
MAIL=/var/spool/mail/hypermegachi
MANPATH=/usr/man:/usr/X11R6/man:/opt/gnome/man:/opt/j2re/man:/opt/j2sdk/man:/opt/kde/man:/opt/qt/man
MAP=/etc/hotplug/usb/libsane.usermap
MAP_CURRENT=/lib/modules/2.6.7-optimized/modules.usbmap
MAP_DISTMAP=/etc/hotplug/usb.distmap
MAP_HANDMAP=/etc/hotplug/usb.handmap
MAP_USERMAP=/etc/hotplug/usb.usermap
MODPROBE=:
MODULE_DIR=/lib/modules/2.6.7-optimized
MOZ_PLUGIN_PATH=/opt/mozilla-plugins
OLDPWD=/sys/bus/usb/devices
OPTERR=1
OPTIND=1
OSTYPE=linux-gnu
PATH=/bin:/sbin:/usr/sbin:/usr/bin
PIPESTATUS=([0]="0")
PKG_CONFIG_PATH=:/opt/gnome/lib/pkgconfig
POSIXLY_CORRECT=y
PPID=2329
PRODUCT=1019/0c55/0100
PS4='+ '
PWD=/etc/hotplug
QTDIR=/opt/qt
REMOVER=/var/run/usb/%sys%devices%pci0000:00%0000:00:02.3%usb2%2-2
SESSION_MANAGER=local/arch:/tmp/.ICE-unix/1939
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=9
SYSFS=/sys
TERM=xterm
TYPE=usb
UID=0
USB_MATCH_DEV_CLASS=16
USB_MATCH_DEV_HI=8
USB_MATCH_DEV_LO=4
USB_MATCH_DEV_PROTOCOL=64
USB_MATCH_DEV_SUBCLASS=32
USB_MATCH_INT_CLASS=128
USB_MATCH_INT_PROTOCOL=512
USB_MATCH_INT_SUBCLASS=256
USB_MATCH_PRODUCT=2
USB_MATCH_VENDOR=1
USER=hypermegachi
WINDOWID=33554437
XAUTHORITY=/home/hypermegachi/.Xauthority
XCURSOR_SIZE=
XCURSOR_THEME=default
_=line
bDeviceClass=0
bDeviceProtocol=0
bDeviceSubClass=0
bInterfaceClass=0
bInterfaceProtocol=0
bInterfaceSubClass=0
bcdDevice_hi=0
bcdDevice_lo=0
idProduct=0
idVendor=0
line=
match_flags=0
module=0x00
usb_bDeviceClass=0
usb_bDeviceProtocol=0
usb_bDeviceSubClass=0
usb_bInterfaceClass=1000
usb_bInterfaceProtocol=1000
usb_bInterfaceSubClass=1000
usb_bcdDevice=256
usb_idProduct=3157
usb_idVendor=4121
[71G [1;34m[[1;37mDONE[1;34m][1;0m
-------------------------------------------------
any ideas to hide all that junk?
Offline
#2 2004-08-02 13:37:02
- i3839
- Member
- Registered: 2004-02-04
- Posts: 1,185
Re: lots and lots of hotplug output
That looks like all the envrionment variables of the hotplug script. You could try up-/downgrading bash or something like that.
Offline
#3 2004-08-02 16:53:31
- hypermegachi
- Member
- Registered: 2004-07-25
- Posts: 311
Re: lots and lots of hotplug output
reinstalling bash didn't fix it :'(
Offline
#4 2004-08-02 17:22:10
- dp
- Member
- From: Zürich, Switzerland
- Registered: 2003-05-27
- Posts: 3,378
- Website
Re: lots and lots of hotplug output
i cannot reproduce this (well, i didn't try to cp / to somewhere else, because i do not have 'another partition' ;-) ), but i would try
- pacman -Suy initscripts hotplug
to make sure they both are updated and all files are correct
apropos: you can clone partitions using dd instead of cp
The impossible missions are the only ones which succeed.
Offline
#5 2004-08-02 20:55:57
- wdemoss
- Member
- From: WV - USA
- Registered: 2004-01-18
- Posts: 222
Re: lots and lots of hotplug output
I see the same effect on bootup also. I just assumed it was the recent update to bash 3.0. It's not that annoying, so I figured I would just sit tight and wait and see if it's fixed by an update to something else.
-wd
Hobbes : Shouldn't we read the instructions?
Calvin : Do I look like a sissy?
Offline
#6 2004-08-03 02:35:07
- hypermegachi
- Member
- Registered: 2004-07-25
- Posts: 311
Re: lots and lots of hotplug output
dd is the devil. no one use it to copy partitions!!! i tried that at first and screwed up big time. only do it if your original partition and new partition are the EXACT same size. otherwise you'll run into problems (which i did). anywho, using cp -a worked a lot better.
i'll try reupdating initscripts and hotplug and see how that goes
Offline
#7 2004-08-03 03:17:41
- lanrat
- Member
- From: Poland
- Registered: 2003-10-28
- Posts: 1,274
Re: lots and lots of hotplug output
I think the output comes from usb.agent in /etc/hotplug
If you remove usbutils it will not run and also there will be no usb coldplugging. I'm not sure if it's possible to do something about it :-)
Offline
#8 2004-08-03 16:08:37
- hypermegachi
- Member
- Registered: 2004-07-25
- Posts: 311
Re: lots and lots of hotplug output
reinstalling initscripts and hotplug didn't do the trick. i have a feeling it's probably the bash 3 update. i probably booted up to my old install, updated to bash 3, and then copied my partition over....so then both partitions displayed all that output.
anyways, i recompiled my kernel to have practically no modules (only my ati and iptables are modules). almost everything else is compiled in. most importantly the usb ones, cuz i have a usb keyboard and mouse. anywho, i can avoid all that ugly output....for now...
Offline
#9 2004-08-03 16:28:43
- Lefungus
- Member
- Registered: 2004-03-28
- Posts: 26
Re: lots and lots of hotplug output
I had this behaviour when i upgraded fom syslog to syslog-ng.
It's not bash3 since hotplug did that before i installed it
Offline
#10 2004-08-03 19:58:30
- KalephOne
- Member
- From: Fortaleza, Brasil
- Registered: 2004-04-02
- Posts: 99
Re: lots and lots of hotplug output
I'm using bash3 and syslog-ng and just tested hotplug (i dont use it) - no problems here
Kaleph
jabber: kaleph@jabber.org
Offline
#11 2004-08-03 21:42:22
- hypermegachi
- Member
- Registered: 2004-07-25
- Posts: 311
Re: lots and lots of hotplug output
i turned off and uninstalled all system loggers...don't know if that's a good idea, but i don't think i'll ever need to know what my kernel says.
anywho, having those uninstalled doesn't do the trick for me 
Offline
#12 2004-08-03 22:25:01
- dp
- Member
- From: Zürich, Switzerland
- Registered: 2003-05-27
- Posts: 3,378
- Website
Re: lots and lots of hotplug output
i turned off and uninstalled all system loggers...don't know if that's a good idea, but i don't think i'll ever need to know what my kernel says.
:arrow: if it's the kernel, you can tell it to be "quiet" by adding this word as append i lilo or grub
The impossible missions are the only ones which succeed.
Offline
#13 2004-08-03 22:59:09
- lanrat
- Member
- From: Poland
- Registered: 2003-10-28
- Posts: 1,274
Re: lots and lots of hotplug output
Uninstalling all system loggers is not a good idea, seriously :-)
The hotplug (coldplug) usb output also depends on how much usb hardware do you have connected during boot ;-)
Offline
#14 2004-08-04 00:02:38
- Xentac
- Forum Fellow
- From: Victoria, BC
- Registered: 2003-01-17
- Posts: 1,797
- Website
Re: lots and lots of hotplug output
How about we just fix this problem at the source?
http://xentac.net/~jchu/hotplug.patch
Apply this in the /etc/hotplug directory.
I'll submit a bug report in a minute.
I have discovered that all of mans unhappiness derives from only one source, not being able to sit quietly in a room
- Blaise Pascal
Offline
#15 2004-08-04 02:05:09
- hypermegachi
- Member
- Registered: 2004-07-25
- Posts: 311
Re: lots and lots of hotplug output
UUUUUUUU DDAAAAAAAAAAAHHHH MAAAAAAAAAAANNNN
works great!
Offline
#16 2004-08-04 16:45:27
- Lefungus
- Member
- Registered: 2004-03-28
- Posts: 26
Re: lots and lots of hotplug output
Latest hotplug version works now correctly for me without the previous output.
Offline
Pages: 1