You are not logged in.
Pages: 1
Hi,
The device is a Pinnacle Hybrid Pro 330e (2304:0226). After a long and troublesome search and some dead links I found the v4l-experimental branch, compiled its modules and loaded em2880-dvb.
dmesg output:
(...)
em28xx new video device (2304:0226): interface 0, class 255
em28xx: device is attached to a USB 2.0 bus
em28xx: you're using the experimental/unstable tree from mcentral.de
em28xx: there's also a stable tree available but which is limited to
em28xx: linux <=2.6.19.2
em28xx: it's fine to use this driver but keep in mind that it will move
em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's
em28xx: proved to be stable
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 6168920k swap on /dev/sda5. Priority:-1 extents:1 across:6168920k
input: em2880/em2870 remote control as /class/input/input10
em28xx-input.c: remote control handler attached
attach_inform: eeprom detected.
em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 26 02 d0 12 5c 03 8e 16 a4 1c
em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 33 00 33 00 30 00
em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 31 00 32 00 30 00
em28xx #0: i2c eeprom b0: 31 00 31 00 37 00 37 00 39 00 39 00 31 00 00 00
em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 54 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 2304:0226
AC97 audio (5 sample rates)
500mA max power
Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
tuner 1-0061: chip found @ 0xc2 (em28xx #0)
attach inform (default): detected I2C address c2
/root/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback
tuner 0x61: Configuration acknowledged
/root/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback
/root/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request!
/root/v4l-dvb-experimental/v4l/tuner-core.c: xc3028 tuner successfully loaded
attach_inform: tvp5150 detected.
tvp5150 1-005c: tvp5150am1 detected.
Loading base firmware: xc3028_init0.i2c.fw
ieee1394: Host added: ID:BUS[0-00:1023] GUID[1122334455667788]
Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
xc3028-tuner.c: firmware 2.7
ANALOG TV REQUEST
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em28xx #0: Found Pinnacle Hybrid Pro (2)
em28xx-audio.c: probing for em28x1 non standard usbaudio
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
Em28xx: Initialized (Em28xx Audio Extension) extension
(...)
em2880-dvb.c: DVB Init
em2880-dvb.c: unsupported device
[b]em2880-dvb.c: failed initializing zl10353 DVB-T demodulator
em2880-dvb.c: retrying with mt352 DVB-T demodulator
FIXME:em28xx_i2c_send_bytes(1e): write failed:[/b]
===============================
7f
================================
mt352_read_register: readreg error (reg=127, ret==-19)
em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb
em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1"
Em28xx: Initialized (Em2880 DVB Extension) extensionHas anybody made the device work?
Analog TV is no problem with kdetv (but is with tvtime), but DVB does not function ...
Last edited by Kelhim (2008-06-16 19:57:00)
Offline
Pages: 1